xml.nodescript.signals.Lichtblocksignal_Dimming_8Bit.nodescript Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of bidibwizard-client Show documentation
Show all versions of bidibwizard-client Show documentation
jBiDiB BiDiB Wizard Client Application POM
## Dieses Script definiert ein Asseccory,
## um die zwei/vier LED eines Licht-Blocksignal (DB)
## anzusteuern.
##
## Hardware: 2 Lightport (Port 0 = rt, 1 = ge)
## Software: 1 accessory
## 2 macros, 0 = Hp0, 1 = Hp1
##
## history: 2016-12-06 A.Tillner, erste Version
##
## how to use:
## A) configure
## In section 1, define your ports and the desired accessory number
## In section 2, define your settings (like brightness and speed)
## B) load and run this script
## what will happen?
## 1. the ports will be configured with the given parameters
## 2. three new macros for the aspects will be defined
## 3. these macros will be assigned to the accessory
## C) have fun
##
## -------------- 1. Select Target
## #var(int macro0, int this_accessory)
## <-- ## set ( $my_accessory = 1)
## <-- ## set ( $my_macro = 10) ## wir verwenden drei Macros, Nr. 10 und die folgenden zwei
## <-- ## set ( $start_led = 2) ## bei ws2811, die erste LED ist an Lightport 2 angeschlossen
##instruction(text:de="Konfiguration eines DB Licht-Blocksignal:
Erster Lightport = rt, ge
Erstes Macro = Hp0, Hp1", text:en="Configuration of a block signal (DB): first lightport = rt, ge")
##application(text:de="Konfiguration eines DB Licht-Blocksignal", text:en="Configuration of a block signal (DB)")
##
##input($my_accessory:accessory, text:de="Nummer des zu erzeugenden Accessory", text:en="Nummber of the Accessory", default=0)
##input($my_macro:macro, text:de="Nummer des ersten Macros (Hp0)", text:en="Number of the first macro (Hp0)", default=0)
##input($start_led:int, text:de="Nummer des ersten Lightport (rt LED)", text:en="Number of the first Lightport (rt LED)", default=0)
##input($prevent_replace_labels:boolean, text:de="Keine Namen für Accessory, Makros, Ports ersetzen", text:en="Prevent replace labels for accessory, macro and ports", default=false)
#set($led_gap = 1) ## die anderen vier LED sind an den folgenden vier Lightports angeschlossen
#set($AccessoyName = "Licht-Blocksignal")
##
## -------------- 2. set Parameters for Ports
#set($WertbeiOff = 0)
#set($WertbeiOn = 200)
#set($DimmzeitOff = 10)
#set($DimmzeitOn = 10)
#set($Ueberblenden = 15)
#set($OnTime = 0)
## -------------- 3. execute part of the script
#set($macro0 = $my_macro) ## need some additional macros
#set($macro1 = $macro0 + 1) ## need some additional macros
#set($led_rt = $start_led) ## LED rt1 an erstem lightport, der eingegeben wurde
#set($led_ge = 1 * $led_gap + $start_led) ## LED rt2 an nächstem lightport
#######################################
## Setzt label, wenn ${prevent_replace_labels} NICHT true
#if (!${prevent_replace_labels})
## Set label of Ports
set light ${led_rt} name="${AccessoyName}${my_accessory}_${led_rt}_rt"
set light ${led_ge} name="${AccessoyName}${my_accessory}_${led_ge}_ge"
## Set label of Macro
set macro ${macro0} name="${AccessoyName}${my_accessory}_Hp0"
set macro ${macro1} name="${AccessoyName}${my_accessory}_Hp1"
## Set label of Asseccories
set accessory ${my_accessory} name="${AccessoyName}${my_accessory}"
#end
#######################################
##
## Ports: (set Parameters)
config port ptype=light ValueOff=${WertbeiOff} ValueOn=${WertbeiOn} DimmOff=${DimmzeitOff} DimmOn=${DimmzeitOn} number=${led_rt}
config port ptype=light ValueOff=${WertbeiOff} ValueOn=${WertbeiOn} DimmOff=${DimmzeitOff} DimmOn=${DimmzeitOn} number=${led_ge}
################################################/
## Macro Ausfahrsignal Hp0
##
select macro ${macro0}
config macro repeat=1 slowdown=1
## Signal dunkel
add step ptype=light action=down number=${led_rt}
add step ptype=light action=down number=${led_ge}
## Sp0 setzten, $Ueberblenden Ticks dunkel
add step ptype=light action=up delay=${Ueberblenden} number=${led_rt}
##
## Ende Macro Ausfahrsignal Hp0
##
################################################/
## Macro Ausfahrsignal Hp1
##
select macro ${macro1}
config macro repeat=1 slowdown=1
## Signal dunkel
add step ptype=light action=down number=${led_rt}
add step ptype=light action=down number=${led_ge}
## Hp1 setzten, $Ueberblenden Ticks dunkel
add step ptype=light action=up delay=${Ueberblenden} number=${led_ge}
##
## Ende Macro Ausfahrsignal Hp1
##
################################################/
## Define Accessory
select accessory ${my_accessory}
add aspect 0 macroname="${AccessoyName}${my_accessory}_Hp0"
add aspect 1 macroname="${AccessoyName}${my_accessory}_Hp1"