data.nodescript.signals.DB_HV_Lichtvorsignal.nodescript Maven / Gradle / Ivy

Go to download
### Dieses Script definiert ein Asseccory, 
### um die vier LED eines Lichtvorsignal (DB)
### anzusteuern.
###
### Hardware: 4 Lightport (Port 0 = gn1, 1 = gn2, 2 = ge1, 3 = ge2)
### Software: 1 accessory
###           4 macros, 0 = Vr0, 1 = Vr1, 2 = Vr2, 3 = dark
###
### history: 2016-12-07 A.Tillner, erste Version
###          2017-01-17 A.Tillner, 
###                     - Dimming unabhängig vom Node 
###                     - Accessory Namen eingeben 
###
### how to use:
### A) configure
###    In section 1, define your ports and the desired accessory number
###    In section 2, define your settings (like brightness and speed)
### B) load and run this script
###    what will happen?
###    1. the ports will be configured with the given parameters
###    2. three new macros for the aspects will be defined
###    3. these macros will be assigned to the accessory
### C) have fun
###
### -------------- 1. Select Target
##application(text:de="DB H/V Licht-Vorsignal", text:en="DB H/V Distant signal")
##instruction(text:de="DB H/V Licht-Vorsignal: 
Lichtausgänge = gn1, gn2, ge1, ge2 
Makros = Vr0, Vr1, Vr2, Dunkel")
##instruction(text:en="DB H/V Distant signal: 
lightports = gn1, gn2, ge1, ge2 
macros = Vr0, Vr1, Vr2, dark")
###
##input($AccessoryName:string, text:de="Name des Vorsignal-Accessories: ", text:en="Name of the distant signal Accessory: ", default="Vorsignal")
##input($my_accessory:accessory, text:de="Nummer des zu erzeugenden Accessory: ", text:en="Nummber of the Accessory: ", default=0)
##input($my_macro:macro, text:de="Nummer des ersten Macros (Vr0): ", text:en="Number of the first macro (Vr0): ", default=0)
##input($start_led:light, text:de="Nummer des ersten Lightport (gn1): ", text:en="Number of the first Lightport (gn1): ", default=0)
##input($prevent_replace_labels:boolean, text:de="Keine Namen fuer Accessory, Makros, Ports ersetzen", text:en="Prevent replace labels for accessory, macro and ports", default=false)

#set($led_gap = 1)           ### die anderen vier LED sind an den folgenden vier Lightports angeschlossen
###
### -------------- 2. set Parameters for Ports
#set($WertbeiOff = 0)
#set($WertbeiOn = 200)
#set($Ueberblenden = 15)
#set($OnTime = 0)

#if (${dimm_range} == 8)  ### Es handelt sich um einen Knoten mit 8 Bit Dimming
#set($DimmzeitOff = 10)
#set($DimmzeitOn = 10)
#set($DimmzeitOffParam = "DimmOff=${DimmzeitOff}")
#set($DimmzeitOnParam = "DimmOn=${DimmzeitOn}")
#else                     ### Es handelt sich um einen Knoten mit 16 Bit Dimming
#set($DimmzeitOff = 2500)
#set($DimmzeitOn = 2500)
#set($DimmzeitOffParam = "DimmOff88=${DimmzeitOff}")
#set($DimmzeitOnParam = "DimmOn88=${DimmzeitOn}")
#end

### -------------- 3. execute part of the script

#set($macro0 = $my_macro)    ### need some additional macros
#set($macro1 = $macro0 + 1)  ### need some additional macros
#set($macro2 = $macro0 + 2)  ### need some additional macros
#set($macro3 = $macro0 + 3)  ### need some additional macros
#set($led_gn1 = $start_led)                 ### LED gn1 an erstem lightport, der eingegeben wurde
#set($led_gn2 = 1 * $led_gap + $start_led)  ### LED gn2 an nächstem lightport
#set($led_ge1 = 2 * $led_gap + $start_led)  ### LED ge1 an nächstem lightport
#set($led_ge2 = 3 * $led_gap + $start_led)  ### LED ge2 an nächstem lightport

########################################
### Setzt label, wenn ${prevent_replace_labels} NICHT true
#if (!${prevent_replace_labels})
### 
### Set label of Ports
set light ${led_gn1} name="${AccessoryName}_${my_accessory}_${led_gn1}_gn1"
set light ${led_gn2} name="${AccessoryName}_${my_accessory}_${led_gn2}_gn2"
set light ${led_ge1} name="${AccessoryName}_${my_accessory}_${led_ge1}_ge1"
set light ${led_ge2} name="${AccessoryName}_${my_accessory}_${led_ge2}_ge2"

### Set label of Macro
set macro ${macro0} name="${AccessoryName}_${my_accessory}_Vr0"
set macro ${macro1} name="${AccessoryName}_${my_accessory}_Vr1"
set macro ${macro2} name="${AccessoryName}_${my_accessory}_Vr2"
set macro ${macro3} name="${AccessoryName}_${my_accessory}_Dunkel"

### Set label of Accessories
set accessory ${my_accessory} name="${AccessoryName}_${my_accessory}"

#end
########################################

### 
### Ports: (set Parameters)
config port ptype=light ValueOff=${WertbeiOff} ValueOn=${WertbeiOn} ${DimmzeitOffParam} ${DimmzeitOnParam} number=${led_ge1}
config port ptype=light ValueOff=${WertbeiOff} ValueOn=${WertbeiOn} ${DimmzeitOffParam} ${DimmzeitOnParam} number=${led_ge2}
config port ptype=light ValueOff=${WertbeiOff} ValueOn=${WertbeiOn} ${DimmzeitOffParam} ${DimmzeitOnParam} number=${led_gn1}
config port ptype=light ValueOff=${WertbeiOff} ValueOn=${WertbeiOn} ${DimmzeitOffParam} ${DimmzeitOnParam} number=${led_gn2}



################################################/
### Macro Ausfahrsignal Vr0
###
select macro ${macro0}
config macro repeat=1 slowdown=1
### Signal dunkel
add step ptype=light action=down number=${led_ge1}
add step ptype=light action=down number=${led_ge2}
add step ptype=light action=down number=${led_gn1}
add step ptype=light action=down number=${led_gn2}

### Vr0 setzten, $Ueberblenden Ticks dunkel
add step ptype=light action=up delay=${Ueberblenden} number=${led_ge1}
add step ptype=light action=up number=${led_ge2}
###
### Ende Macro Ausfahrsignal Vr0
###
################################################/
### Macro Ausfahrsignal Vr1
###
select macro ${macro1}
config macro repeat=1 slowdown=1
### Signal dunkel
add step ptype=light action=down number=${led_ge1}
add step ptype=light action=down number=${led_ge2}
add step ptype=light action=down number=${led_gn1}
add step ptype=light action=down number=${led_gn2}

### Vr1 setzten, $Ueberblenden Ticks dunkel
add step ptype=light action=up delay=${Ueberblenden} number=${led_gn1}
add step ptype=light action=up number=${led_gn2}
###
### Ende Macro Ausfahrsignal Vr1
###
################################################/
### Macro Ausfahrsignal Vr2
###
select macro ${macro2}
config macro repeat=1 slowdown=1
### Signal dunkel
add step ptype=light action=down number=${led_ge1}
add step ptype=light action=down number=${led_ge2}
add step ptype=light action=down number=${led_gn1}
add step ptype=light action=down number=${led_gn2}

### Vr2 setzten, $Ueberblenden Ticks dunkel
add step ptype=light action=up delay=${Ueberblenden} number=${led_gn1}
add step ptype=light action=up number=${led_ge2}
###
### Ende Macro Ausfahrsignal Vr2
###
################################################/
### Macro Ausfahrsignal Dunkel
###
select macro ${macro3}
config macro repeat=1 slowdown=1
### Signal dunkel
add step ptype=light action=down number=${led_ge1}
add step ptype=light action=down number=${led_ge2}
add step ptype=light action=down number=${led_gn1}
add step ptype=light action=down number=${led_gn2}

###
### Ende Macro Ausfahrsignal Dunkel
###

### Define Accessory
select accessory ${my_accessory}
add aspect 0 macroname="${AccessoryName}_${my_accessory}_Vr0"
add aspect 1 macroname="${AccessoryName}_${my_accessory}_Vr1"
add aspect 2 macroname="${AccessoryName}_${my_accessory}_Vr2"
add aspect 3 macroname="${AccessoryName}_${my_accessory}_Dunkel"