catalogs.BiDiBWizard_locale.properties Maven / Gradle / Ivy

Go to download
Show more of this group Show more artifacts with this name
Show all versions of bidibwizard Show documentation
jBiDiB BiDiB Wizard POM
There is a newer version: 2.0.0-M1
common.comm.AnalogPortStatus.start=Start
common.comm.BacklightPortStatus.start=Start
common.comm.BoosterStatus.go_req=Booster is turned off and it is requested to be turned on
common.comm.BoosterStatus.no_power=Booster is turned off (no power)
common.comm.BoosterStatus.on=Booster is turned on
common.comm.BoosterStatus.on_here=Booster is turned on (was turned on by a local key)
common.comm.BoosterStatus.on_hot=Booster is turned on and the temperature is critical
common.comm.BoosterStatus.on_limit=Booster is turned on and the current is limited
common.comm.BoosterStatus.on_stop_req=Booster is turned on and it is requested to be turned off
common.comm.BoosterStatus.off=Booster is turned off
common.comm.BoosterStatus.off_here=Booster is turned off (was turned off by a local key)
common.comm.BoosterStatus.off_hot=Booster is turned off (overheating)
common.comm.BoosterStatus.off_no_dcc=Booster is turned off (no DCC input)
common.comm.BoosterStatus.short=Booster is turned off (short circuit)
common.comm.CommandStationStatus.off=Off
common.comm.CommandStationStatus.stop=Stop
common.comm.CommandStationStatus.softstop=Softstop
common.comm.CommandStationStatus.go=On (with Watchdog)
common.comm.CommandStationStatus.prog=Prog
common.comm.CommandStationStatus.progbusy=ProgBusy
common.comm.CommandStationStatus.query=Query
common.comm.CommandStationStatus.go_ign_wd=On (w/o Watchdog)

common.comm.CriticalFunctionStatus.begin=Start
common.comm.CriticalFunctionStatus.end=End
common.comm.FeedbackPortStatus.free=free
common.comm.FeedbackPortStatus.occupied=occupied
common.comm.FlagStatus.clear=Clear
common.comm.FlagStatus.query1=Query 1
common.comm.FlagStatus.query0=Query 0
common.comm.FlagStatus.set=Set
common.comm.InputStatus.query0=Wait until value=0
common.comm.InputStatus.query1=Wait until value=1
common.comm.LightPortStatus.on=Turn on
common.comm.LightPortStatus.status.on=on
common.comm.LightPortStatus.off=Turn off
common.comm.LightPortStatus.status.off=off
common.comm.LightPortStatus.up=Dim up
common.comm.LightPortStatus.status.up=Dim up
common.comm.LightPortStatus.down=Dim down
common.comm.LightPortStatus.status.down=Dim down
common.comm.LightPortStatus.neon=Neon flash
common.comm.LightPortStatus.status.neon=Neon flash
common.comm.LightPortStatus.blinka=Blink A
common.comm.LightPortStatus.status.blinka=Blink A
common.comm.LightPortStatus.blinkb=Blink B
common.comm.LightPortStatus.status.blinkb=Blink B
common.comm.LightPortStatus.flasha=Flash A
common.comm.LightPortStatus.status.flasha=Flash A
common.comm.LightPortStatus.flashb=Flash B
common.comm.LightPortStatus.status.flashb=Flash B
common.comm.LightPortStatus.doubleflash=Double flash
common.comm.LightPortStatus.status.doubleflash=Double flash
common.comm.LightPortStatus.unknown=Unknown
common.comm.LightPortStatus.status.unknown=Unknown
common.comm.LightPortStatus.test=Test toggle
common.comm.LightPortStatus.status.test=Test toggle
common.comm.MacroStatus.start=Start
common.comm.MacroStatus.stop=Stop
common.comm.MacroStatus.end=End
common.comm.MotorPortStatus.forward=Forward
common.comm.MotorPortStatus.status.forward=Forward
common.comm.MotorPortStatus.backward=Backward
common.comm.MotorPortStatus.status.backward=Backward
common.comm.ServoPortStatus.start=Start
common.comm.ServoPortStatus.status.start=Start
common.comm.SoundPortStatus.play=Play
common.comm.SoundPortStatus.status.play=Play
common.comm.SoundPortStatus.pause=Pause
common.comm.SoundPortStatus.status.pause=Pause
common.comm.SoundPortStatus.stop=Stop
common.comm.SoundPortStatus.status.stop=Stop
common.comm.SwitchPortStatus.on=Turn on
common.comm.SwitchPortStatus.status.on=on
common.comm.SwitchPortStatus.off=Turn off
common.comm.SwitchPortStatus.status.off=off
common.comm.SwitchPortStatus.test=Test toggle
common.comm.SwitchPortStatus.status.test=Test toggle
common.comm.SwitchPairPortStatus.on=straight
common.comm.SwitchPairPortStatus.status.on=straight
common.comm.SwitchPairPortStatus.off=turnout
common.comm.SwitchPairPortStatus.status.off=turnout
common.comm.SwitchPairPortStatus.test=Test toggle
common.comm.SwitchPairPortStatus.status.test=Test toggle
common.comm.AccessoryOkayStatus.query0=Notify Okay, if value=0
common.comm.AccessoryOkayStatus.query1=Notify Okay, if value=1
common.comm.AccessoryOkayStatus.no_feedback=Okay (always)
common.comm.AccessoryAspectStatus.start=Start
common.comm.SpeedSteps.14=14
common.comm.SpeedSteps.28=28
common.comm.SpeedSteps.128=128
common.comm.SpeedSteps.DCC_SDF=SDF
common.comm.SpeedSteps.MM14=MM14
common.comm.SpeedSteps.MM27a=MM27a
common.comm.SpeedSteps.MM27b=MM27b
common.comm.SpeedSteps.M4=M4

dialog.AboutDialog.authors=Authors
dialog.AboutDialog.build=Build
dialog.AboutDialog.date=Date
dialog.AboutDialog.java=Java version
dialog.AboutDialog.title=About
dialog.AboutDialog.version=Version
dialog.LabelDialog.label=Label
dialog.LabelDialog.title=Change label
dialog.NodeDetailsDialog.address=Address
dialog.NodeDetailsDialog.features=Features
dialog.NodeDetailsDialog.label=Label
dialog.NodeDetailsDialog.protocol=Protocol
dialog.NodeDetailsDialog.software=Software
dialog.NodeDetailsDialog.title=Node details
dialog.NodeDetailsDialog.uuid=UUID

mvc.main.view.component.NodeErrorsDialog.title=Errors during update node
mvc.main.view.component.NodeErrorsDialog.close=Close
mvc.main.view.component.NodeErrorsDialog.cancel=Cancel

mvc.cvprogrammer.view.CvProgrammerView.title=CV programmer
mvc.cvprogrammer.view.CvProgrammerView.action=Action
mvc.cvprogrammer.view.CvProgrammerView.address=Address
mvc.cvprogrammer.view.CvProgrammerView.addressType=Addressing
mvc.cvprogrammer.view.CvProgrammerView.close=Close
mvc.cvprogrammer.view.CvProgrammerView.operation=Operation
mvc.cvprogrammer.view.panel.CvWritePanel.title=CV value
mvc.cvprogrammer.view.panel.CvWritePanel.value=Value
mvc.cvprogrammer.view.panel.CvWritePanel.write=Write
mvc.cvprogrammer.view.panel.CvWritePanel.send=Send
mvc.cvprogrammer.view.panel.CvReadPanel.title=CV number
mvc.cvprogrammer.view.panel.CvReadPanel.name=CV

mvc.pt.view.PtConfirmDialog.title=CV programmer for programming track
mvc.pt.view.PtConfirmDialog.message-warn=Attention: You're changing into Programming Mode!
mvc.pt.view.PtConfirmDialog.message=This mode operates on every connected decoder (devices, loco and function decoder). Please make sure that only the DCC decoder to be programmed is connected with the system.
mvc.pt.view.PtConfirmDialog.do-not-ask=Do not ask in future
mvc.pt.view.PtConfirmDialog.continue=Continue
mvc.pt.view.PtConfirmDialog.cancel=Cancel

mvc.pt.view.PtProgrammerView.title=CV programmer for programming track
mvc.pt.view.PtProgrammerView.close=Close
mvc.pt.view.PtProgrammerView.switch-to-prog-mode-failed.title=Programming Track
mvc.pt.view.PtProgrammerView.switch-to-prog-mode-failed.message=Switch CommandStation to ProgrammMode failed.
mvc.pt.view.PtProgrammerView.tab-direct-access=Direct
mvc.pt.view.PtProgrammerView.tab-direct-access.tooltip=Direct CV access.
mvc.pt.view.PtProgrammerView.tab-address=Address
mvc.pt.view.PtProgrammerView.tab-address.tooltip=Address programming support.
mvc.pt.view.PtProgrammerView.tab-railcom=Railcom
mvc.pt.view.PtProgrammerView.tab-railcom.tooltip=Railcom channel configuration support.

mvc.pt.view.panel.DirectAccessPanel.direct-message=Read and write CV values for DCC-decoder.
mvc.pt.view.panel.DirectAccessPanel.mode=Mode
mvc.pt.view.panel.DirectAccessPanel.cv-number=CV number
mvc.pt.view.panel.DirectAccessPanel.cv-value=CV value
mvc.pt.view.panel.DirectAccessPanel.verify=Verify
mvc.pt.view.panel.CvWritePanel.title=CV value
mvc.pt.view.panel.CvWritePanel.value=Value
mvc.pt.view.panel.CvWritePanel.send=Send
mvc.pt.view.panel.AddressPanel.address-message=Read and write the loco address with support for short and long addresses.
mvc.pt.view.panel.AddressPanel.address-mode=Address mode
mvc.pt.view.panel.AddressPanel.address=Address
mvc.pt.view.panel.AddressPanel.addressType=Address type
mvc.pt.view.panel.AbstractPtPanel.read=Read
mvc.pt.view.panel.AbstractPtPanel.write=Write
mvc.pt.view.panel.AbstractPtPanel.prog-result=Prog Result
mvc.pt.view.panel.RailcomPanel.railcom-message=Read and write the channel configuration for Railcom.
mvc.pt.view.panel.RailcomPanel.railcom-activate-info=Activate CV29 Bit 3 to receive address messages from decoder.
mvc.pt.view.panel.RailcomPanel.channel1=RailCom Channel 1 Address Broadcast (CV28.0)
mvc.pt.view.panel.RailcomPanel.channel2=RailCom Channel 2 Data Transmission (CV28.1)
mvc.pt.view.panel.RailcomPanel.railcomplus=RailCom+ (CV28.7)
mvc.pt.view.panel.RailcomPanel.channelUsage=RailCom Dynamic Channel Usage (CV28.2)
mvc.pt.view.panel.RailcomPanel.channelUsage.tooltip=The Decoder sends data in Channel 1 and Channel 2. However the transmission in Channel 1 
will be self-terminated after succeeded receipt of the own loco address. 
This allows the detection of a new rerailed Loco by a Railcom system over Channel 1.

mvc.pt.model.PtMode.byte=Byte
mvc.pt.model.PtMode.bit=Bit

mvc.pom.controller.PomProgrammerController.title=CV programmer for programming on main (POM)
#mvc.pom.view.PomConfirmDialog.message-warn=Attention: The Command Station or Boosters are switched off!
#mvc.pom.view.PomConfirmDialog.message=For programming of decoders the Central Station and all Boosters must be switched on.
Continue to switch on?
mvc.pom.controller.PomProgrammerController.message-warn=Attention: The Command Station or Boosters are switched off!
mvc.pom.controller.PomProgrammerController.message=For programming of decoders the Central Station and all Boosters must be switched on.
mvc.pom.controller.PomProgrammerController.activate_booster_and_commandstation=Switch on central station and boosters?
mvc.pom.controller.PomProgrammerController.activate_booster_and_commandstation.text=This will activate the command station and all boosters in the system.
mvc.pom.controller.PomProgrammerController.do_not_activate_booster_and_commandstation=Continue but do not switch on central station and boosters!
mvc.pom.controller.PomProgrammerController.do_not_activate_booster_and_commandstation.text=If the command station and boosters are not enabled, the POM operation may fail.
mvc.pom.controller.PomProgrammerController.cancel_pom_dialog=Abort POM operation.
mvc.pom.controller.PomProgrammerController.cancel_pom_dialog.text=Abort POM operation and close dialog.

mvc.pom.view.PomConfirmDialog.do-not-ask=Do not ask in future
mvc.pom.view.PomConfirmDialog.continue=Continue
mvc.pom.view.PomConfirmDialog.cancel=Cancel

mvc.pom.view.PomProgrammerView.title=CV programmer for POM
mvc.pom.view.PomProgrammerView.close=Close
mvc.pom.view.PomProgrammerView.clearLogArea=Clear
mvc.pom.view.PomProgrammerView.current-address=Address
mvc.pom.view.PomProgrammerView.addressType=Address type
mvc.pom.view.PomProgrammerView.ackn-address-changed=Acknowlegde
mvc.pom.view.PomProgrammerView.tab-direct-access=Direct
mvc.pom.view.PomProgrammerView.tab-direct-access.tooltip=Direct CV access.
mvc.pom.view.PomProgrammerView.tab-address=Address
mvc.pom.view.PomProgrammerView.tab-address.tooltip=Address programming support.
mvc.pom.view.PomProgrammerView.tab-railcom=Railcom
mvc.pom.view.PomProgrammerView.tab-railcom.tooltip=Railcom channel configuration support.
mvc.pom.view.PomProgrammerView.tab-reset=Reset
mvc.pom.view.PomProgrammerView.tab-reset.tooltip=Direct Reset.
mvc.pom.view.PomProgrammerView.switch-to-running-mode-failed.title=Command Station
mvc.pom.view.PomProgrammerView.switch-to-running-mode-failed.message=Switch command station to running mode failed.
POM programming is not possible.

mvc.pom.view.panel.AddressPanel.address-message=Write the loco address with support for short and long addresses.
mvc.pom.view.panel.AddressPanel.address-mode=Address mode
mvc.pom.view.panel.AddressPanel.address=Address
mvc.pom.view.panel.AbstractPomPanel.read=Read
mvc.pom.view.panel.AbstractPomPanel.write=Write
mvc.pom.view.panel.AbstractPomPanel.prog-result=Prog Result
mvc.pom.view.panel.DirectAccessPanel.direct-message=Read and write CV values for DCC-decoder.
mvc.pom.view.panel.DirectAccessPanel.mode=Mode
mvc.pom.view.panel.DirectAccessPanel.cv-number=CV number
mvc.pom.view.panel.DirectAccessPanel.cv-value=CV value
mvc.pom.view.panel.DirectAccessPanel.verify=Verify
mvc.pom.view.panel.RailcomPanel.railcom-message=Read and write the channel configuration for Railcom.
mvc.pom.view.panel.RailcomPanel.railcom-activate-info=Activate CV29 Bit 3 to receive address messages from decoder.
mvc.pom.view.panel.RailcomPanel.channel1=RailCom Channel 1 Address Broadcast (CV28.0)
mvc.pom.view.panel.RailcomPanel.channel2=RailCom Channel 2 Data Transmission (CV28.1)
mvc.pom.view.panel.RailcomPanel.railcomplus=RailCom+ (CV28.7)
mvc.pom.view.panel.RailcomPanel.channelUsage=RailCom Dynamic Channel Usage (CV28.2)
mvc.pom.view.panel.RailcomPanel.channelUsage.tooltip=The Decoder sends data in Channel 1 and Channel 2. However the transmission in Channel 1 
will be self-terminated after succeeded receipt of the own loco address. 
This allows the detection of a new rerailed Loco by a Railcom system over Channel 1.
mvc.pom.view.panel.ResetDecoderPanel.reset-decoder-message=Reset the DCC-decoder.
mvc.pom.view.panel.ResetDecoderPanel.cv-number=CV number
mvc.pom.view.panel.ResetDecoderPanel.cv-value=CV value

mvc.pom.model.PomMode.byte=Byte
mvc.pom.model.PomMode.bit=Bit

mvc.features.view.FeaturesView.title=Features of node: {0}
mvc.features.view.FeaturesView.save=Save
mvc.features.view.FeaturesView.cancel=Cancel
mvc.features.view.panel.FeatureTableModel.featureName=Feature
mvc.features.view.panel.FeatureTableModel.featureId=ID
mvc.features.view.panel.FeatureTableModel.value=Value
mvc.features.view.panel.FeatureTableModel.unit=Unit

mvc.error.view.ErrorView.title=Error
mvc.error.view.ErrorView.details=Click \"Details\" button to see more information ...

mvc.firmware.view.FirmwareView.title=Update firmware
mvc.firmware.view.FirmwareView.close=Close

mvc.firmware.controller.FirmwareController.status.load-firmware-passed=Load firmware ({}) from file into buffer passed.
mvc.firmware.controller.FirmwareController.status.load-firmware-failed=Load firmware ({}) from file into buffer failed.
mvc.firmware.controller.FirmwareController.status.start-transfer=Start transfer of '{}'.
mvc.firmware.controller.FirmwareController.status.unexpected-answer=Unexpected answer from node while sending FW data.
mvc.firmware.controller.FirmwareController.status.transfer-aborted=FW update process was aborted during transfer of {}.
mvc.firmware.controller.FirmwareController.status.transfer-finished=Finished transfer of '{}'.
mvc.firmware.controller.FirmwareController.status.enter-firmware-update-mode-failed=Enter firmware update operation failed.
mvc.firmware.controller.FirmwareController.status.transfer-firmware-failed=Transfer firmware update to node failed.
mvc.firmware.controller.FirmwareController.status.transfer-firmware-timeout-retry=Timeout during firmware update operation: {}. \r\nData packet will be transferred again.
mvc.firmware.controller.FirmwareController.status.transfer-firmware-timeout=Timeout during firmware update operation: {}. \r\nAborted firmware update, try start again.
mvc.firmware.controller.FirmwareController.status.transfer-firmware-more-time-requested=More processing time required from node: {}ms
mvc.firmware.controller.FirmwareController.status.transfer-firmware-continue-after-more-time-wait=Continue with processing after expiry of wait time: {}ms
mvc.firmware.controller.FirmwareController.status.transfer-firmware-invalid-answer=The firmware update state ({}) returned from the node does not match the firmware operation: {}.
mvc.firmware.controller.FirmwareController.status.transfer-firmware-no-answer=No firmware update state returned from the node after send the firmware operation: {}.
mvc.firmware.controller.FirmwareController.status.transfer-finished-answer-failed=The answer for finish the firmware update operation failed.
mvc.firmware.controller.FirmwareController.status.node-lost=The node to update was lost! Abort operation.

mvc.firmware.view.panel.FirmwareUpdatePanel.status.file-selected=Selected firmware file: {}
mvc.firmware.view.panel.FirmwareUpdatePanel.status.selected-dest=Selected destination: {}, firmware: {}
mvc.firmware.view.panel.FirmwareUpdatePanel.file=File
mvc.firmware.view.panel.FirmwareUpdatePanel.firmware=Firmware
mvc.firmware.view.panel.FirmwareUpdatePanel.name=Name
mvc.firmware.view.panel.FirmwareUpdatePanel.productname=Product
mvc.firmware.view.panel.FirmwareUpdatePanel.uuid=UUID

mvc.firmware.view.panel.FirmwareUpdatePanel.backup-node.message=The firmware update might clear the macros and accessories stored on the node.\r\nPlease backup the node to allow restore the macros after the update! 
mvc.firmware.view.panel.FirmwareUpdatePanel.continue.message=To continue with the firmware update press OK.\r\nTo create a backup press Cancel to abort the operation.
mvc.firmware.view.panel.FirmwareUpdatePanel.unplug-servo.message=Unplug servos before continue with the firmware update!
mvc.firmware.view.panel.FirmwareUpdatePanel.unplug-servo.title=Firmware update
mvc.firmware.view.panel.FirmwareUpdatePanel.show-unplug-servo-warning.choice=Do not ask in future
mvc.firmware.view.panel.FirmwareUpdatePanel.selected-firmware-incompatible=The selected firmware update is incompatible with the installed firmware.\r\nCurrently installed variant: {}

mvc.firmware.view.panel.FirmwareUpdatePanel.node-info=Node information
mvc.firmware.view.panel.FirmwareUpdatePanel.firmware-update=Firmware update
mvc.firmware.view.panel.FirmwareUpdatePanel.select-firmware=Select
mvc.firmware.view.panel.FirmwareUpdatePanel.progress=Update progress
mvc.firmware.view.panel.FirmwareUpdatePanel.startUpdate=Start
mvc.firmware.view.panel.FirmwareUpdatePanel.close=Close
mvc.firmware.view.panel.FirmwareUpdatePanel.clearLogArea=Clear
mvc.firmware.view.panel.FirmwareUpdatePanel.filter=Firmware files
mvc.firmware.view.panel.FirmwareUpdatePanel.memoryType=Memory type
mvc.firmware.view.panel.FirmwareUpdatePanel.memoryType-0=Flash
mvc.firmware.view.panel.FirmwareUpdatePanel.memoryType-1=Eeprom
mvc.firmware.view.panel.FirmwareUpdatePanel.memoryType-other=Other
mvc.firmware.view.panel.FirmwareUpdatePanel.expert-mode=Expert mode
mvc.firmware.view.panel.FirmwareUpdatePanel.import-vendor-files.title=Import additional files
mvc.firmware.view.panel.FirmwareUpdatePanel.import-vendor-files.message=CV definition files, vendor images and default labels found in firmware archive.\r\nImport in BiDiB-Wizard?
mvc.firmware.view.panel.FirmwareUpdatePanel.load-firmware-failed.message=Load firmware failed
mvc.firmware.view.panel.FirmwareUpdatePanel.load-firmware-failed.title=Load firmware

mvc.firmware.model.UpdateStatus.none=
mvc.firmware.model.UpdateStatus.prepare=Prepare
mvc.firmware.model.UpdateStatus.entry-passed=In FW-update-mode
mvc.firmware.model.UpdateStatus.data-transfer=Data-transfer
mvc.firmware.model.UpdateStatus.data-transfer-passed=Data-transfer passed
mvc.firmware.model.UpdateStatus.exit-passed=FW-update-mode finished
mvc.firmware.model.UpdateStatus.prepare-failed=Prepare failed
mvc.firmware.model.UpdateStatus.data-transfer-failed=Data-transfer failed
mvc.firmware.model.UpdateStatus.node-lost=Node lost!

mvc.loco.view.LocoView.additionalFunctions=Additional functions
mvc.loco.view.LocoView.address=Address
mvc.loco.view.LocoView.backwards=backwards
mvc.loco.view.LocoView.binaryState=Binary state
mvc.loco.view.LocoView.emergencyStop=EMRG stop
mvc.loco.view.LocoView.forwards=forwards
mvc.loco.view.LocoView.stop=Stop
mvc.loco.view.LocoView.light=Light
mvc.loco.view.LocoView.loco=Loco
mvc.loco.view.LocoView.reportedSpeed=Reported speed
mvc.loco.view.LocoView.speed=Current Speed Step
mvc.loco.view.LocoView.speedSteps=Speed Steps
mvc.loco.view.LocoView.stop=Stop
mvc.loco.view.LocoView.stopLoco=Stop loco
mvc.loco.view.LocoView.title.loco=Loco controller
mvc.loco.view.LocoView.title.car=Car controller
mvc.loco.view.LocoView.binStates=Binary States
mvc.loco.view.LocoView.writeBinaryState=BinState write
mvc.loco.view.LocoView.script=Script
mvc.loco.view.LocoView.multiRFBasis=Multi RF-Basis
mvc.loco.view.LocoView.Counter=Counter
mvc.loco.view.LocoView.reset=Reset
mvc.loco.view.LocoView.devBinState=Developer BIN STATE
mvc.loco.view.LocoView.send=Send

mvc.loco.model.RfBasisMode.single=Single
mvc.loco.model.RfBasisMode.multi1=Base 1
mvc.loco.model.RfBasisMode.multi2=Base 2
mvc.loco.model.RfBasisMode.multi3=Base 3
mvc.loco.model.RfBasisMode.multi4=Base 4
mvc.loco.model.RfBasisMode.multi5=Base 5
mvc.loco.model.RfBasisMode.multi6=Base 6
mvc.loco.model.RfBasisMode.multi7=Base 7
mvc.loco.model.RfBasisMode.multi8=Base 8

mvc.loco.model.BinStateValue.on=on
mvc.loco.model.BinStateValue.off=off

mvc.loco.view.ScriptPanel.selectScript=Select
mvc.loco.view.ScriptPanel.startScript=Start
mvc.loco.view.ScriptPanel.stopScript=Stop
mvc.loco.view.ScriptPanel.scriptDescription=OpenDCC Scriptfiles
mvc.loco.view.ScriptPanel.repeating=Repeating

mvc.loco.view.speedo.SpeedometerPanel.title=Speedometer
mvc.loco.view.speedo.SpeedometerPanel.start=Start
mvc.loco.view.speedo.SpeedometerPanel.stop=Stop
mvc.loco.view.speedo.SpeedometerPanel.readCv=Read CVs
mvc.loco.view.speedo.SpeedometerPanel.writeCv=Write CVs
mvc.loco.view.speedo.SpeedometerPanel.vehicle=Vehicle
mvc.loco.view.speedo.SpeedometerPanel.address=Address
mvc.loco.view.speedo.SpeedometerPanel.firmware=FW
mvc.loco.view.speedo.SpeedometerPanel.speedSteps=Speed Steps
mvc.loco.view.speedo.SpeedometerPanel.speedStep=Speed Step
mvc.loco.view.speedo.SpeedometerPanel.version=HW version
mvc.loco.view.speedo.SpeedometerPanel.vMinPref=Vmin pref. (CV2)
mvc.loco.view.speedo.SpeedometerPanel.vMinPref.tooltip=Minimum speed recommendation: Adjust value here to get 5 km/h in measurement
mvc.loco.view.speedo.SpeedometerPanel.vMax=Vmax (CV5)
mvc.loco.view.speedo.SpeedometerPanel.vMax.tooltip=Maximum speed in % (of the maximum available range)
mvc.loco.view.speedo.SpeedometerPanel.velocity=Velocity
mvc.loco.view.speedo.SpeedometerPanel.vMin=Vmin (CV35)
mvc.loco.view.speedo.SpeedometerPanel.vMid=Vmid (CV36)
mvc.loco.view.speedo.SpeedometerPanel.unit=km/h
mvc.loco.view.speedo.SpeedometerPanel.scale=Scale
mvc.loco.view.speedo.SpeedometerPanel.pid=Motor PID Controller
mvc.loco.view.speedo.SpeedometerPanel.pValue=P value
mvc.loco.view.speedo.SpeedometerPanel.iValue=I value
mvc.loco.view.speedo.SpeedometerPanel.dValue=D value
mvc.loco.view.speedo.SpeedometerPanel.measurement=Measurement
mvc.loco.view.speedo.SpeedometerPanel.speed=Speed
mvc.loco.view.speedo.SpeedometerPanel.speedStep2=Speed 2
mvc.loco.view.speedo.SpeedometerPanel.speedStep64=Speed 64
mvc.loco.view.speedo.SpeedometerPanel.speedToCv35=Apply speed CV35
mvc.loco.view.speedo.SpeedometerPanel.speedToCv35.tooltip=Apply speed in CV35
mvc.loco.view.speedo.SpeedometerPanel.speedToCv36=Apply speed CV36
mvc.loco.view.speedo.SpeedometerPanel.speedToCv36.tooltip=Apply speed in CV36
mvc.loco.view.speedo.SpeedometerPanel.clear_console=Clear

mvc.loco.view.speedo.SpeedometerPanel.tab-prog-result=Prog Result
mvc.loco.view.speedo.SpeedometerPanel.tab-prog-result.tooltip=The Prog Result
mvc.loco.view.speedo.SpeedometerPanel.tab-speed-diagram=Speed Diagram
mvc.loco.view.speedo.SpeedometerPanel.tab-speed-diagram.tooltip=The Speed Diagram

mvc.loco.view.speedo.SpeedometerPanel.autoAdjust=Auto adjust
mvc.loco.view.speedo.SpeedometerPanel.autoAdjust.tooltip=Auto adjust program

mvc.loco.view.speedo.SpeedometerPanel.speedRangeMeasurement=Speed Measurement
mvc.loco.view.speedo.SpeedometerPanel.speedRangeMeasurement.tooltip=Speed Range Measurement over all speed steps

mvc.loco.view.speedo.MeasurementProgressDialog.title=Speed Measurement
mvc.loco.view.speedo.MeasurementProgressDialog.progress=Progress
mvc.loco.view.speedo.MeasurementProgressDialog.cancel=Cancel

mvc.loco.view.speedo.ApproveScaleDialog.title=Scale
mvc.loco.view.speedo.ApproveScaleDialog.instruction=Enter the scale.
mvc.loco.view.speedo.ApproveScaleDialog.message=Check if the values are valid and update the values if necessary.
mvc.loco.view.speedo.ApproveScaleDialog.scale=Scale
mvc.loco.view.speedo.ApproveScaleDialog.continue=Continue
mvc.loco.view.speedo.ApproveScaleDialog.cancel=Cancel
mvc.loco.view.speedo.ApproveScaleDialog.update=Update

mvc.loco.view.speedo.ApproveSpeedRangeDialog.title=Speed und Scale
mvc.loco.view.speedo.ApproveSpeedRangeDialog.instruction=Enter the values for scale, target values for Vmin and VMax.
Vmax is the maximum speed of the vehicle.
Measured values, vMin: {0} km/h, vMax: {1} km/h
mvc.loco.view.speedo.ApproveSpeedRangeDialog.message=Check if the values are valid and update the values if necessary.
mvc.loco.view.speedo.ApproveSpeedRangeDialog.continue=Continue
mvc.loco.view.speedo.ApproveSpeedRangeDialog.cancel=Cancel
mvc.loco.view.speedo.ApproveSpeedRangeDialog.update=Update
mvc.loco.view.speedo.ApproveSpeedRangeDialog.vMin=Vmin
mvc.loco.view.speedo.ApproveSpeedRangeDialog.vMax=Vmax
mvc.loco.view.speedo.ApproveSpeedRangeDialog.pwmPercent=PWM%
mvc.loco.view.speedo.ApproveSpeedRangeDialog.percent=%
mvc.loco.view.speedo.ApproveSpeedRangeDialog.scale=Scale
mvc.loco.view.speedo.ApproveSpeedRangeDialog.vTargetMax=Vmax
mvc.loco.view.speedo.ApproveSpeedRangeDialog.kmh=km/h

mvc.loco.view.speedo.ApprovePidParamsDialog.title=PID-Parameters
mvc.loco.view.speedo.ApprovePidParamsDialog.instruction=Enter the values for PID parameters.
mvc.loco.view.speedo.ApprovePidParamsDialog.message=Check if the values are valid and update the values if necessary.
mvc.loco.view.speedo.ApprovePidParamsDialog.continue=Continue
mvc.loco.view.speedo.ApprovePidParamsDialog.cancel=Cancel
mvc.loco.view.speedo.ApprovePidParamsDialog.update=Update
mvc.loco.view.speedo.ApprovePidParamsDialog.cv61=P value (CV61)
mvc.loco.view.speedo.ApprovePidParamsDialog.cv62=I value (CV62)
mvc.loco.view.speedo.ApprovePidParamsDialog.cv63=D value (CV63)
mvc.loco.view.speedo.ApprovePidParamsDialog.default=Default values
mvc.loco.view.speedo.ApprovePidParamsDialog.start=Start measurement

mvc.loco.view.speedo.FinishOrRestoreDialog.title=Finish or Restore CV
mvc.loco.view.speedo.FinishOrRestoreDialog.instruction=The CV values were measured.Check if the values are valid.
mvc.loco.view.speedo.FinishOrRestoreDialog.message=Confirm to use the new values or restore the original CV values.
mvc.loco.view.speedo.FinishOrRestoreDialog.adjusted-values=New adjusted values
mvc.loco.view.speedo.FinishOrRestoreDialog.cancel=Restore
mvc.loco.view.speedo.FinishOrRestoreDialog.update=Accept

mvc.accessory.view.AccessoryView.title=DCC Accessory controller
mvc.accessory.view.AccessoryView.close=Close
mvc.accessory.view.AccessoryView.clearLogArea=Clear
mvc.accessory.view.AccessoryView.tab-normal=Normaler Accessory Decoder
mvc.accessory.view.AccessoryView.tab-normal.tooltip=Normaler DCC Accessory Decoder
mvc.accessory.view.AccessoryView.tab-extended=Extended Accessory Decoder
mvc.accessory.view.AccessoryView.tab-extended.tooltip=Extended DCC Accessory Decoder
mvc.accessory.view.panel.AbstractAccessoryPanel.dcc-address=DCC address
mvc.accessory.view.panel.AbstractAccessoryPanel.addressing=Addressing
mvc.accessory.view.panel.AbstractAccessoryPanel.switchTime=Switch time
mvc.accessory.view.panel.AbstractAccessoryPanel.timeBaseUnit=Time unit
mvc.accessory.view.panel.AbstractAccessoryPanel.timingControl=Timing control
mvc.accessory.view.panel.DccAccessoryPanel.aspect-0=red
mvc.accessory.view.panel.DccAccessoryPanel.aspect-1=green

org.bidib.jbidibc.core.enumeration.AccessoryAddressingEnum.rcn-213=RCN-213
org.bidib.jbidibc.core.enumeration.AccessoryAddressingEnum.rcn-213.tooltip=Offset according to RailCommunity-Norm 213
org.bidib.jbidibc.core.enumeration.AccessoryAddressingEnum.direct=direct
org.bidib.jbidibc.core.enumeration.AccessoryAddressingEnum.direct.tooltip=

org.bidib.jbidibc.core.enumeration.TimeBaseUnitEnum.unit-100ms=100ms
org.bidib.jbidibc.core.enumeration.TimeBaseUnitEnum.unit-1s=1s

org.bidib.jbidibc.core.enumeration.TimingControlEnum.coil-on-off=conventional (coil-on/coil-off)
org.bidib.jbidibc.core.enumeration.TimingControlEnum.output-unit=output unit

mvc.main.controller.DefaultMainMenuListener.open-port=Open connection ...
mvc.main.controller.DefaultMainMenuListener.save-under=Save under ...
mvc.main.controller.DefaultMainMenuListener.copy-logfiles-failed=Copy logfiles failed.\r\nReason: {0}
mvc.main.controller.DefaultMainMenuListener.title-error=Copy logfiles

mvc.main.controller.MainController.nodeDescription=Node files
mvc.main.controller.MainController.connectHint=Connect to system with File > Connect from menu.
mvc.main.controller.MainController.load-config=Loading configuration of node: %s
mvc.main.controller.MainController.load-config-finished=Finished loading configuration of node: %s (Load duration: %s)
mvc.main.controller.MainController.load-config-finished-no-vendorcv=Finished loading configuration of node: %s (Load duration: %s). No CV definition available.
mvc.main.controller.MainController.load-config-finished-load-vendorcv-failed=Finished loading configuration of node: %s (Load duration: %s). Load CV definition failed.

mvc.main.controller.MainController.change-node-vetoed=Pending changes detected: %s
mvc.main.controller.MainController.discardPendingChanges.text=Pending changes detected that were not transfered to node yet.\r\nDiscard the changed values?
mvc.main.controller.MainController.discardPendingChanges.title=Select node

mvc.main.controller.MainController.close-simulation-connection.title=Close the simulation connection
mvc.main.controller.MainController.close-simulation-connection.message=Simulation
Have you saved all pending changes?
Press OK to continue to close the connection.

mvc.main.controller.MainController.pairing-required=Pairing required. Press pairing button on netBiDiB device.
mvc.main.controller.MainController.pairing-passed=Pairing passed.
mvc.main.controller.MainController.pairing-failed=Pairing failed.

mvc.main.controller.MainController.new-node-added=Added new node: %s
mvc.main.controller.MainController.new-node-with-error=Error during processing of new node: %s
mvc.main.controller.MainController.node-lost=Node lost: %s
mvc.main.controller.MainController.missing-port-config=The node did not deliver the configuration for all ports!
mvc.main.controller.MainController.total-nodes-added=Total number of nodes added: %d

mvc.main.controller.MainController.checkLoadMacroContent=Load macro content from node before export
mvc.main.controller.MainController.checkLoadFeatures=Load features from node before export
mvc.main.controller.MainController.checkLoadCVs=Load CVs from node before export
mvc.main.controller.MainController.checkRestoreAccessoryContent=Import accessories?
mvc.main.controller.MainController.checkRestoreMacroContent=Import macro content?
mvc.main.controller.MainController.checkRestoreFeatures=Import feature configuration?
mvc.main.controller.MainController.checkRestoreCVs=Import CV configuration?
mvc.main.controller.MainController.checkRestoreNodeString=Import name of node?
mvc.main.controller.MainController.exportedNodeState=Exported node state to file: %s
mvc.main.controller.MainController.importedNodeState=Imported node state file: %s
mvc.main.controller.MainController.exportedMacro=Exported macro to file: %s
mvc.main.controller.MainController.exportedAccessory=Exported accessory to file: %s
mvc.main.controller.MainController.writeToNode=Write data to node in progress ...
mvc.main.controller.MainController.writeToNodeFinished=Write data to node has finished
mvc.main.controller.MainController.loadCvFinished=Load CV values has finished! Total loading duration: %s
mvc.main.controller.MainController.loadCvFailed=Load CV values from node failed!
mvc.main.controller.MainController.writeCvFinished=Write CV values has finished! Total writing duration: %s
mvc.main.controller.MainController.save-values-on-node-failed=Save values on node failed!
mvc.main.controller.MainController.error.title=BiDiB-Wizard
mvc.main.controller.MainController.pending_changes=Pending changes
mvc.main.controller.MainController.macro_has_pending_changes=The current macro has pending changes!\r\nContinue and discard changes?
mvc.main.controller.MainController.accessory_has_pending_changes=The current accessory has pending changes!\r\nContinue and discard changes?
mvc.main.controller.MainController.ask_export_empty_macro=The current macro has no steps!\r\nContinue?
mvc.main.controller.MainController.ask_continue_export_macro_with_empty_step=The current macro has at least one empty step!\r\nThe empty step will be removed during export of the macro.\r\nContinue?
mvc.main.controller.MainController.export_macro.title=Export macro
mvc.main.controller.MainController.export_macro_failed.instruction=Export macro failed!
mvc.main.controller.MainController.export_macro_failed=Export macro {0} failed!

mvc.main.controller.MainController.import-values-failed=Errors detected during import of data!
mvc.main.controller.MainController.import-prepare-values-failed.title=Import node
mvc.main.controller.MainController.import-prepare-values-failed.message=Errors detected during preparation for import of data!\r\nPress Cancel to abort import operation and restart the node manually! 
mvc.main.controller.MainController.import-prepare-values-failed.close=Ignore

mvc.main.controller.MainController.save-macro.title=Save macro
mvc.main.controller.MainController.save-macro-to-node-failed=Save macro {0} to node failed!
mvc.main.controller.MainController.save-macro-to-node-failed.instruction=Save macro to node failed!

mvc.main.controller.MainController.apply-default-labels.title=Default Labels
mvc.main.controller.MainController.apply-default-labels.text=Apply the default labels for node:

mvc.main.controller.MainController.mandatory-directory-missing.title=BiDiB-Wizard
mvc.main.controller.MainController.mandatory-directory-missing.text=Start of BiDiB-Wizard is terminated because the directory for BiDiB configuration files is missing or not available.

## pairing dialog
dialog.PairingDialog.dialogTitle=netBiDiB Pairing
dialog.PairingDialog.cancel=Cancel
dialog.PairingDialog.dialogMessage=Press the pairing button on netBiDiB device.
Remaining time: {0}s.
dialog.PairingDialog.productName=Product Name:
dialog.PairingDialog.userName=Label:
dialog.PairingDialog.uniqueId=Unique ID:
dialog.PairingDialog.requestorName=Requestor:

mvc.main.view.MainNodeListActionListener.importOptions.title=Import Options
mvc.main.view.MainNodeListActionListener.exportOptions.title=Export Options
mvc.main.view.MainNodeListActionListener.generateOptions.title=Documentation Options

mvc.main.view.MainNodeListActionListener.importOneControl.title=Import node
mvc.main.view.MainNodeListActionListener.importOneControl.message=The current node is a OneControl or OneDriveTurn with GPIO that must be configured as input or output.\r\nUncheck import macro content and accessories and only import CV values to configure GPIO?\r\n\r\nNote: Please klick 'No' if the import is started the 2nd time!
mvc.main.view.MainNodeListActionListener.localLogoffRejected.error.message=Local Logoff failed. Reason: {0}
mvc.main.view.MainNodeListActionListener.localLogoffRejected.error.title=Local Logoff

mvc.main.view.MainNodeListActionListener.invalid-file-format=The content of the selected file does not contain any valid data format for node file.

mvc.main.view.component.SaveNodeConfigurationDialog.ok=Ok
mvc.main.view.component.SaveNodeConfigurationDialog.cancel=Cancel
mvc.main.view.component.SaveNodeConfigurationDialog.title=Transfer node configuration
mvc.main.view.component.SaveNodeConfigurationDialog.description=Select the configuration items that will be transfered and saved non the node.
mvc.main.view.component.SaveNodeConfigurationDialog.transfer-description=Start transfer of selected configuration to node? 
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveMacroLabels=Macro names
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveMacros=All macros
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveAccessories=All accessories
mvc.main.view.component.SaveNodeConfigurationDialog.checkSavePortLabels=Port names
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveLightportConfiguration=Lightport configuration
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveBacklightportConfiguration=Backlightport configuration
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveServoportConfiguration=Servoport configuration
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveSwitchportConfiguration=Switchport configuration
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveFeatures=All features
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveConfigurationVariables=All CVs

dialog.FileDialog.save=Save file
dialog.FileDialog.open=Open file
dialog.FileDialog.save_file=Save file
dialog.FileDialog.override_existing_file=A file with the name ''{0}'' exists already.\nOverride content of existing file?

mvc.main.view.component.AccessoryFileDialog.checkUseLegacyFormat=Use legacy export format
mvc.main.view.component.AccessoryFileDialog.accessoryDescriptionLegacy=Accessory files (legacy)
mvc.main.view.component.AccessoryFileDialog.accessoryDescription=Accessory files

mvc.main.view.component.MacroFileDialog.checkUseLegacyFormat=Use legacy export format
mvc.main.view.component.MacroFileDialog.macroDescriptionLegacy=Macro files (legacy)
mvc.main.view.component.MacroFileDialog.macroDescription=Macro files

mvc.main.model.Accessory.label=Accessory
mvc.main.model.AccessoryTableModel.aspect=Aspect
mvc.main.model.AccessoryTableModel.macro=Macro
mvc.main.model.AccessoryTableModel.test=Test
common.model.AnalogPort.label=Analog
common.model.FeedbackPort.label=Feedback
mvc.main.model.Flag.label=Flag
common.model.InputPort.label=Input
mvc.main.model.InputPortTableModel.label=Input
mvc.main.model.InputPortTableModel.ioBehaviour=I/O Behaviour
mvc.main.model.InputPortTableModel.switchOffTime=SwitchOff Time
mvc.main.model.InputPortTableModel.portIdentifier=Port
mvc.main.model.InputPortTableModel.status=Status
common.model.LightPort.label=Light
mvc.main.model.LightPortTableModel.label=Output
mvc.main.model.LightPortTableModel.pwmMin=Brightness off
mvc.main.model.LightPortTableModel.pwmMax=Brightness on
mvc.main.model.LightPortTableModel.dimMin=Fade in
mvc.main.model.LightPortTableModel.dimMax=Fade out
mvc.main.model.LightPortTableModel.rgb=RGB
mvc.main.model.LightPortTableModel.transitionTime=Transitiontime
mvc.main.model.LightPortTableModel.dmxMapping=DMX address
mvc.main.model.LightPortTableModel.channel=Channel
mvc.main.model.LightPortTableModel.portIdentifier=Port
mvc.main.model.LightPortTableModel.status=Status
mvc.main.model.LightPortTableModel.test=Test
common.model.BacklightPort.label=Backlight
mvc.main.model.BacklightPortTableModel.label=Output
mvc.main.model.BacklightPortTableModel.dimSlopeDown=Fade in
mvc.main.model.BacklightPortTableModel.dimSlopeUp=Fade out
mvc.main.model.BacklightPortTableModel.dmxMapping=DMX address
mvc.main.model.BacklightPortTableModel.channel=Channel
mvc.main.model.BacklightPortTableModel.test=Test target value
mvc.main.model.Macro.label=Macro
mvc.main.model.MacroRepeatDay.everyDay=Every day
mvc.main.model.MacroRepeatTime.none=No repetition
mvc.main.model.MacroRepeatTime.minutely=Every minute
mvc.main.model.MacroRepeatTime.quarter_hourly=Every 15 minutes
mvc.main.model.MacroRepeatTime.half_hourly=Every 30 minutes
mvc.main.model.MacroRepeatTime.hourly=Every hour
mvc.main.model.MacroRepeatTime.working_hourly=Every working hour (08:00-17:00)
mvc.main.model.MacroTableModel.step=Step
mvc.main.model.MacroTableModel.delay=Delay
mvc.main.model.MacroTableModel.portType=Port Type
mvc.main.model.MacroTableModel.action=Action
mvc.main.model.MacroTableModel.portNumber=Port
mvc.main.model.MacroTableModel.extra=Extra

common.model.MotorPort.label=Motor
mvc.main.model.MotorPortTableModel.label=Output
mvc.main.model.MotorPortTableModel.direction=Direction
mvc.main.model.MotorPortTableModel.value=Speed

common.model.ServoPort.label=Servo
mvc.main.model.ServoPortTableModel.label=Output
mvc.main.model.ServoPortTableModel.speed=Speed
mvc.main.model.ServoPortTableModel.value=Destination value in %
mvc.main.model.ServoPortTableModel.trimUp=Trim value top
mvc.main.model.ServoPortTableModel.trimDown=Trim value bottom
mvc.main.model.ServoPortTableModel.columnheader.value.tooltip=Use the <cursor left>/<cursor right> and 
 <page up>/<page down> keys to move the slider.
mvc.main.model.ServoPortTableModel.test=Test

mvc.main.model.SimplePortTableModel.label=Output
mvc.main.model.SimplePortTableModel.test=Test

common.model.SwitchPort.label=Output
mvc.main.model.SwitchPortTableModel.label=Output
mvc.main.model.SwitchPortTableModel.portIdentifier=Port
mvc.main.model.SwitchPortTableModel.status=Status
mvc.main.model.SwitchPortTableModel.test=Test
mvc.main.model.SwitchPortTableModel.ioBehaviour=I/O Behaviour
mvc.main.model.SwitchPortTableModel.switchOffTime=SwitchOff Time
mvc.main.model.SwitchPortTableModel.loadType=Load-Type

common.model.SwitchPairPort.label=SwitchPair
mvc.main.model.SwitchPairPortTableModel.label=Output
mvc.main.model.SwitchPairPortTableModel.portIdentifier=Port
mvc.main.model.SwitchPairPortTableModel.status=Status
mvc.main.model.SwitchPairPortTableModel.test=Test
mvc.main.model.SwitchPairPortTableModel.switchOffTime=SwitchOff Time
mvc.main.model.SwitchPairPortTableModel.loadType=Load-Type

common.model.SoundPort.label=Sound
mvc.main.model.SoundPortTableModel.label=Output
mvc.main.model.SoundPortTableModel.portIdentifier=Port
mvc.main.model.SoundPortTableModel.status=Status
mvc.main.model.SoundPortTableModel.test=Test
mvc.main.model.SoundPortTableModel.pulseTime=Pulse Time

mvc.main.model.function.AccessoryOkayFunction.title=Accessory notify
mvc.main.model.function.AnalogPortAction.title=Analog port
mvc.main.model.function.BacklightPortAction.title=Backlight port
mvc.main.model.function.CriticalFunction.title=Crit. section
mvc.main.model.function.DelayFunction.title=Delay
mvc.main.model.function.FlagFunction.title=Flag
mvc.main.model.function.InputFunction.title=Input port
mvc.main.model.function.LightPortAction.title=Light port
mvc.main.model.function.MacroFunction.title=Macro
mvc.main.model.function.MotorPortAction.title=Motor port
mvc.main.model.function.RandomDelayFunction.title=Random delay
mvc.main.model.function.ServoPortAction.title=Servo port
mvc.main.model.function.SoundPortAction.title=Sound port
mvc.main.model.function.SwitchPortAction.title=Switch port
mvc.main.model.function.SwitchPairPortAction.title=Paired-Switch port
mvc.main.model.function.ServoMoveQueryFunction.title=Await servo move
mvc.main.model.function.EmptyFunction.title=

mvc.main.view.MainView.title=BiDiB-Wizard

mvc.main.view.MainView.toolbar.bidib.connect.alttext=Connect
mvc.main.view.MainView.toolbar.bidib.connect=Connect to BiDiB
mvc.main.view.MainView.toolbar.bidib.disconnect.alttext=Disconnect
mvc.main.view.MainView.toolbar.bidib.disconnect=Disconnect from BiDiB
mvc.main.view.MainView.toolbar.bidib.all-booster-off.alttext=All booster off
mvc.main.view.MainView.toolbar.bidib.all-booster-off=Switch all booster off
mvc.main.view.MainView.toolbar.bidib.all-booster-on.alttext=All booster on
mvc.main.view.MainView.toolbar.bidib.all-booster-on=Switch all booster on

mvc.main.view.MainView.toolbar.nodescripting.open=Open BiDiB Node Configurator
mvc.main.view.MainView.toolbar.nodescripting.open.alttext=Open BiDiB Node Configurator

mvc.main.view.MainView.toolbar.simulation.open=Open Simulation
mvc.main.view.MainView.toolbar.simulation.open.alttext=Open

mvc.main.view.MainView.toolbar.debuginterface.open=Open Debug-Interface
mvc.main.view.MainView.toolbar.debuginterface.open.alttext=Open the Debug-Interface
mvc.main.view.MainView.toolbar.debugconsole.open=Open Debug-Console
mvc.main.view.MainView.toolbar.debugconsole.open.alttext=Open the Debug-Console

mvc.main.view.MainView.toolbar.bidibpi.reset=Reset the BiDiB-Pi
mvc.main.view.MainView.toolbar.bidibpi.reset.alttext=Reset the BiDiB-Pi

mvc.main.view.component.LabelList.chooseLabel=Please choose a name.

mvc.main.view.component.BoosterOnConfirmDialog.title=All booster on
mvc.main.view.component.BoosterOnConfirmDialog.message-warn=Switch all booster on?
mvc.main.view.component.BoosterOnConfirmDialog.message=Continue: All booster that are displayed in the booster table will be switched on.
Continue booster & command station: Switch all boosters and command station on.
mvc.main.view.component.BoosterOnConfirmDialog.continue=Continue
mvc.main.view.component.BoosterOnConfirmDialog.continueBoosterAndCommandStation=Continue booster & command station
mvc.main.view.component.BoosterOnConfirmDialog.cancel=Cancel
mvc.main.view.component.BoosterOnConfirmDialog.do-not-ask=Remember selection and do not ask in future
mvc.main.view.component.BoosterOnConfirmDialog$CommandStationStartMode.watchdog=With Watchdog
mvc.main.view.component.BoosterOnConfirmDialog$CommandStationStartMode.ign-watchdog=Without Watchdog

mvc.main.view.component.InsertPortsConfirmDialog.title=Insert Ports
mvc.main.view.component.InsertPortsConfirmDialog.message-info=Insert ports?
mvc.main.view.component.InsertPortsConfirmDialog.message=The ports will be inserted at the selected position
and the succeeding ports will be moved back.
mvc.main.view.component.InsertPortsConfirmDialog.portsCount=Number of ports
mvc.main.view.component.InsertPortsConfirmDialog.continue=Continue
mvc.main.view.component.InsertPortsConfirmDialog.cancel=Cancel

mvc.main.view.menu.AccessoryListMenu.editLabel=Change label
mvc.main.view.menu.AccessoryListMenu.export=Export
mvc.main.view.menu.AccessoryListMenu.import=Import
mvc.main.view.menu.AccessoryListMenu.initialize=Delete
mvc.main.view.menu.AccessoryListMenu.initialize.tooltip=Remove all aspects and initialize the accessory with default values.
mvc.main.view.menu.AccessoryListMenu.save=Save
mvc.main.view.menu.AccessoryListMenu.save.tooltip=Save accessory on the node
mvc.main.view.menu.AccessoryListMenu.reload=Reload
mvc.main.view.menu.AccessoryListMenu.reload.tooltip=Reload accessory from node
mvc.main.view.menu.AccessoryTableMenu.delete=Delete
mvc.main.view.menu.AccessoryTableMenu.insertEmptyAfter=Insert empty aspect after
mvc.main.view.menu.AccessoryTableMenu.insertEmptyBefore=Insert empty aspect before
mvc.main.view.menu.AccessoryTableMenu.selectAll=Select all
mvc.main.view.menu.AccessoryTableMenu.copy=Copy
mvc.main.view.menu.AccessoryTableMenu.cut=Cut
mvc.main.view.menu.AccessoryTableMenu.pasteAfter=Paste after
mvc.main.view.menu.MacroListMenu.editLabel=Change label
mvc.main.view.menu.MacroListMenu.export=Export
mvc.main.view.menu.MacroListMenu.import=Import
mvc.main.view.menu.MacroListMenu.start=Test
mvc.main.view.menu.MacroListMenu.start.tooltip=Transfer the macro to the node and start it.
mvc.main.view.menu.MacroListMenu.stop=Stop
mvc.main.view.menu.MacroListMenu.stop.tooltip=Stop the macro on the node.
mvc.main.view.menu.MacroListMenu.initialize=Delete
mvc.main.view.menu.MacroListMenu.initialize.tooltip=Remove all steps and initialize the macro with default values.
mvc.main.view.menu.MacroListMenu.save=Write
mvc.main.view.menu.MacroListMenu.save.tooltip=Transfer and save macro on the node
mvc.main.view.menu.MacroListMenu.reload=Reload
mvc.main.view.menu.MacroListMenu.reload.tooltip=Reload macro from node
mvc.main.view.menu.MacroTableMenu.copy=Copy
mvc.main.view.menu.MacroTableMenu.cut=Cut
mvc.main.view.menu.MacroTableMenu.delete=Delete
mvc.main.view.menu.MacroTableMenu.insertEmptyAfter=Insert empty step after
mvc.main.view.menu.MacroTableMenu.insertEmptyBefore=Insert empty step before
mvc.main.view.menu.MacroTableMenu.pasteAfter=Paste after
mvc.main.view.menu.MacroTableMenu.pasteBefore=Paste before
mvc.main.view.menu.MacroTableMenu.pasteInvertedAfter=Paste inverted after
mvc.main.view.menu.MacroTableMenu.selectAll=Select all
mvc.main.view.menu.MainMenuBar.about=About
mvc.main.view.menu.MainMenuBar.edit=Edit
mvc.main.view.menu.MainMenuBar.extras=Extras
mvc.main.view.menu.MainMenuBar.file=File
mvc.main.view.menu.MainMenuBar.help=Help
mvc.main.view.menu.MainMenuBar.node=Node
mvc.main.view.menu.MainMenuBar.preferences=Preferences
mvc.main.view.menu.MainMenuBar.tools=Tools
mvc.main.view.menu.MainMenuBar.nodeScript=NodeScript Editor
mvc.main.view.menu.MainMenuBar.railcomPlus=RailcomPlus
mvc.main.view.menu.MainMenuBar.pomUpdate=POM Decoder Update
mvc.main.view.menu.MainMenuBar.developerTools=Developer Tools
mvc.main.view.menu.MainMenuBar.debugInterface=Debug Interface
mvc.main.view.menu.MainMenuBar.debugConsole=Debug Console
mvc.main.view.menu.MainMenuBar.window=Window
mvc.main.view.menu.MainMenuBar.saveWorkspace=Save Workspace
mvc.main.view.menu.MainMenuBar.loadWorkspace=Load Workspace
mvc.main.view.menu.MainMenuBar.boosterTable=Booster Table
mvc.main.view.menu.MainMenuBar.feedbackPositionTable=Feedback Position Table
mvc.main.view.menu.MainMenuBar.pingTable=Ping Table
mvc.main.view.menu.MainMenuBar.console=Console
mvc.main.view.menu.MainMenuBar.quit=Quit
mvc.main.view.menu.MainMenuBar.connect=Connect
mvc.main.view.menu.MainMenuBar.disconnect=Disconnect
mvc.main.view.menu.MainMenuBar.logFiles=Collect logfiles
mvc.main.view.menu.MainMenuBar.logPanel=Open RX/TX Logview
mvc.main.view.menu.MainMenuBar.menuitemserror.message=Update visibility of menu items failed.
mvc.main.view.menu.MainMenuBar.menuitemserror.title=BiDiB-Wizard

mvc.main.view.menu.NodeListMenu.addressMessages=Receive address notifications
mvc.main.view.menu.NodeListMenu.cvProgrammer=CV programmer
mvc.main.view.menu.NodeListMenu.features=Features
mvc.main.view.menu.NodeListMenu.reset=Restart
mvc.main.view.menu.NodeListMenu.ping=Ping
mvc.main.view.menu.NodeListMenu.enable=Enable
mvc.main.view.menu.NodeListMenu.enable.tooltip=Enable spontaneous messages (incl. subnodes)
mvc.main.view.menu.NodeListMenu.disable=Disable
mvc.main.view.menu.NodeListMenu.disable.tooltip=Disable spontaneous messages (incl. subnodes)
mvc.main.view.menu.NodeListMenu.dccStart=Start macros from DCC
mvc.main.view.menu.NodeListMenu.details=Details
mvc.main.view.menu.NodeListMenu.editLabel=Change label
mvc.main.view.menu.NodeListMenu.export=Export
mvc.main.view.menu.NodeListMenu.export.tooltip=Export the configurable values (accessories, macros, servo and light port configuration) to a file
mvc.main.view.menu.NodeListMenu.externalStart=Start macros from external input port
mvc.main.view.menu.NodeListMenu.feedbackMessages=Receive feedback notifications
mvc.main.view.menu.NodeListMenu.feedbackMirrorDisabled=Disable feedback mirror messages
mvc.main.view.menu.NodeListMenu.firmwareUpdate=Update firmware
mvc.main.view.menu.NodeListMenu.identify=Identify
mvc.main.view.menu.NodeListMenu.uniqueId=Read UniqueId
mvc.main.view.menu.NodeListMenu.detachAttachNode=Local detach or attach node
mvc.main.view.menu.NodeListMenu.import=Import
mvc.main.view.menu.NodeListMenu.keyMessages=Receive key notifications
mvc.main.view.menu.NodeListMenu.loco=Loco controller
mvc.main.view.menu.NodeListMenu.car=Car controller
mvc.main.view.menu.NodeListMenu.dccAccessory=DCC accessory controller
mvc.main.view.menu.NodeListMenu.locoCv=CV programmer for DCC decoder (POM)
mvc.main.view.menu.NodeListMenu.locoCvPt=CV programmer for DCC decoder (PT)
mvc.main.view.menu.NodeListMenu.save=Save
mvc.main.view.menu.NodeListMenu.saveNode=Save
mvc.main.view.menu.NodeListMenu.saveNode.tooltip=Save configurable values (accessories, macros, servo and light port configuration) to the node
mvc.main.view.menu.NodeListMenu.bulkSwitch=Bulk Switch operations
mvc.main.view.menu.NodeListMenu.bulkSwitch.tooltip=Perform some switch operations on a node for testing purposes
mvc.main.view.menu.NodeListMenu.dmxModeler=DMX Modeler
mvc.main.view.menu.NodeListMenu.clearError=Acknowledge node error
mvc.main.view.menu.NodeListMenu.clearError.tooltip=Clear the error marker icon
mvc.main.view.menu.NodeListMenu.documentation=Generate documentation
mvc.main.view.menu.NodeListMenu.defaultLabels=Generate DefaultLabels
mvc.main.view.menu.NodeListMenu.locoList=Loco table
mvc.main.view.menu.NodeListMenu.nodeDetails=Show node details

mvc.main.view.menu.PortListMenu.editLabel=Change label
mvc.main.view.menu.PortListMenu.mapPort=Map port
mvc.main.view.menu.PortListMenu.insertPorts=Insert ports

mvc.main.view.panel.AccessoryPanel.emptyTable=Click right mouse button to create an aspect.
mvc.main.view.panel.AccessoryPanel.initialState=Initial state
mvc.main.view.panel.AccessoryPanel.execution_state=Execution state: 
mvc.main.view.panel.AccessoryPanel.accessoryName=Accessory
mvc.main.view.panel.AccessoryPanel.stepControl.soundOff=Sound off
mvc.main.view.panel.AccessoryPanel.stepControl.soundOn=Sound on
mvc.main.view.panel.AccessoryPanel.stepControl.soundOnOnlyFunctions=Sound on, only functions
mvc.main.view.panel.AccessoryPanel.aspect=Aspect {0}
mvc.main.view.panel.AccessoryPanel.activeAspect=Active aspect: {0}

mvc.main.view.panel.AccessoryListPanel.name=Accessories
mvc.main.view.panel.AccessoryListPanel.reload=Reload
mvc.main.view.panel.AccessoryListPanel.save=Save
mvc.main.view.panel.AnalogPortListPanel.name=Analog ports
mvc.main.view.panel.AnalogPortListPanel.emptyTable=There are no analog ports for this node.
mvc.main.model.AccessoryStartupAspectModel.aspectParam-unchanged=Unchanged
mvc.main.model.AccessoryStartupAspectModel.aspectParam-restore=Restore
mvc.main.model.AccessoryStartupAspectModel.aspectParam-unknown=

mvc.main.view.panel.BoosterPanel.current=Current
mvc.main.view.panel.BoosterPanel.diagnostic=Diagnostic
mvc.main.view.panel.BoosterPanel.name=Booster / CommandStation
mvc.main.view.panel.BoosterPanel.off=Turn off
mvc.main.view.panel.BoosterPanel.on=Turn on
mvc.main.view.panel.BoosterPanel.booster=Booster status
mvc.main.view.panel.BoosterPanel.status=Booster status
mvc.main.view.panel.BoosterPanel.booster-status-tooltip=The current status of the booster
mvc.main.view.panel.BoosterPanel.booster-query-status=Query booster status
mvc.main.view.panel.BoosterPanel.temperature=Temperature
mvc.main.view.panel.BoosterPanel.voltage=Voltage
mvc.main.view.panel.BoosterPanel.cs=Command Station status
mvc.main.view.panel.BoosterPanel.cs-go=On (with watchdog)
mvc.main.view.panel.BoosterPanel.cs-goIgnWd=On (permanent)
mvc.main.view.panel.BoosterPanel.cs-stop=Stop
mvc.main.view.panel.BoosterPanel.cs-softStop=Softstop
mvc.main.view.panel.BoosterPanel.cs-off=off
mvc.main.view.panel.BoosterPanel.cs-status-tooltip=The current status of the command station
mvc.main.view.panel.BoosterPanel.time=Time
mvc.main.view.panel.BoosterPanel.boosterCurrent=Booster Current

mvc.main.view.panel.FeedbackPortListPanel.name=Feedback ports
mvc.main.view.panel.FeedbackPortListPanel.emptyTable=There are no feedback ports for this node.
mvc.main.view.panel.FeedbackPortListPanel$FeedbackPortListMenu.openLocoDialog=Open Loco controller
mvc.main.view.panel.FeedbackPortListPanel$FeedbackPortListMenu.openPomDialog=Open POM programmer

mvc.main.view.panel.FeedbackPositionListPanel.name=Feedback Positions
mvc.main.view.panel.FeedbackPositionListPanel.emptyTable=No feedback positions received.
mvc.main.view.panel.FeedbackPositionListPanel.label.decoder=Decoder
mvc.main.view.panel.FeedbackPositionListPanel.label.clear=Clear
mvc.main.view.panel.FeedbackPositionListPanel.tooltip.clear=Clear decoder selection
mvc.main.view.panel.FeedbackPositionListPanel.clear_table=Clear table
mvc.main.view.panel.glazed.FeedbackPositionTableFormat.column.decoder=Decoder Address
mvc.main.view.panel.glazed.FeedbackPositionTableFormat.column.location=Location Id
mvc.main.view.panel.glazed.FeedbackPositionTableFormat.column.lastseen=Last Seen

mvc.main.view.panel.GlobalDetectorPanel.name=Global Detector
mvc.main.view.panel.GlobalDetectorPanel.emptyTable=No decoders detected.
mvc.main.view.panel.GlobalDetectorPanel.decoder=Decoder
mvc.main.view.panel.GlobalDetectorPanel$FeedbackAddressDataTableFormat.column.decoder=Decoder Address
mvc.main.view.panel.GlobalDetectorPanel$FeedbackAddressDataTableFormat.column.speed=Speed
mvc.main.view.panel.GlobalDetectorPanel$FeedbackAddressDataTableFormat.column.dynstate=DynState
mvc.main.view.panel.GlobalDetectorPanel$DecoderListMenu.openLocoDialog=Open Loco controller
mvc.main.view.panel.GlobalDetectorPanel$DecoderListMenu.openPomDialog=Open POM programmer

mvc.main.view.panel.InputPortListPanel.name=Input ports
mvc.main.view.panel.InputPortListPanel.emptyTable=There are no input ports for this node.
mvc.main.view.panel.InputPortListPanel.switch-port-title=Switch port type
mvc.main.view.panel.InputPortListPanel.switch-port-confirm=Switch port to input port?
mvc.main.view.panel.LedPanel.title=Serial port
mvc.main.view.panel.LightPortListPanel.name=Light ports
mvc.main.view.panel.LightPortListPanel.emptyTable=There are no light ports for this node.
mvc.main.view.panel.LightPortListPanel.switch-port-title=Switch port type
mvc.main.view.panel.LightPortListPanel.switch-port-confirm=Switch port to light port?

mvc.main.controller.LightPortPanelController.insert-ports-finished=Insert %d ports has finished. Duration: %s

mvc.main.view.panel.renderer.LightPortStatusLabel.on=on
mvc.main.view.panel.renderer.LightPortStatusLabel.off=off
mvc.main.view.panel.renderer.LightPortStatusLabel.up=dim up
mvc.main.view.panel.renderer.LightPortStatusLabel.down=dim down
mvc.main.view.panel.renderer.LightPortStatusLabel.neon=neon flash
mvc.main.view.panel.renderer.LightPortStatusLabel.blinka=blink A
mvc.main.view.panel.renderer.LightPortStatusLabel.blinkb=blink B
mvc.main.view.panel.renderer.LightPortStatusLabel.flasha=flash A
mvc.main.view.panel.renderer.LightPortStatusLabel.flashb=flash B
mvc.main.view.panel.renderer.LightPortStatusLabel.doubleflash=double flash
mvc.main.view.panel.renderer.LightPortStatusLabel.unknown=Unknown
mvc.main.view.panel.renderer.LightPortStatusLabel.test=Test

mvc.main.view.panel.BacklightPortListPanel.name=Backlight ports
mvc.main.view.panel.BacklightPortListPanel.emptyTable=There are no backlight ports for this node.
mvc.main.view.panel.MacroContentPanel.brightness=Brightness
mvc.main.view.panel.MacroContentPanel.destination=Dest. value
mvc.main.view.panel.MacroContentPanel.speed=Speed
mvc.main.view.panel.MacroContentPanel.emptyTable=Click right mouse button to create a macro step.
mvc.main.view.panel.MacroContentPanel.delay=Delay
mvc.main.view.panel.MacroContentPanel.maximum=Upper bound
mvc.main.view.panel.MacroContentPanel.restore-macro-failed=The selected macro could not be restored because an error occured during reading.
mvc.main.view.panel.MacroListPanel.name=Macros
mvc.main.view.panel.MacroListPanel.reload=Reload
mvc.main.view.panel.MacroListPanel.reload.tooltip=Reload macro from node
mvc.main.view.panel.MacroListPanel.load=Read
mvc.main.view.panel.MacroListPanel.load.tooltip=Read macro from node. Pending changes are discarded!
mvc.main.view.panel.MacroListPanel.start=Test
mvc.main.view.panel.MacroListPanel.test=Test
mvc.main.view.panel.MacroListPanel.test.tooltip=Start macro for testing purposes
mvc.main.view.panel.MacroListPanel.testPower=Test
mvc.main.view.panel.MacroListPanel.testPower.tooltip=Transfer current macro to node and start macro for testing purposes
mvc.main.view.panel.MacroListPanel.stop=Stop
mvc.main.view.panel.MacroListPanel.stop.tooltip=Stop macro on the node
mvc.main.view.panel.MacroListPanel.save=Write
mvc.main.view.panel.MacroListPanel.save.tooltip=Transfer and save macro on the node
mvc.main.view.panel.MacroListPanel.transfer=Transfer
mvc.main.view.panel.MacroListPanel.transfer.tooltip=Transfer macro to node
mvc.main.view.panel.MacroListPanel.remoteStart=Start remotely
mvc.main.view.panel.MacroListPanel.remoteStart.tooltip=Start transfered macro on the node (do not transfer changes before start)
mvc.main.view.panel.MacroListPanel.macro_content_not_valid=The macro steps are not valid!\r\nPlease fill in missing data and remove empty macro steps.
mvc.main.view.panel.MacroListPanel.macro_transfer_pending_changes_before_test=Transfer pending macro changes to node before test?
mvc.main.view.panel.MacroListPanel.export=Export
mvc.main.view.panel.MacroListPanel.ask_empty_macro=The current macro has no steps!\r\nContinue?
mvc.main.view.panel.MacroListPanel.ask_continue_macro_remove_empty_step=The current macro has at least one empty step!\r\nThe empty step will be removed during processing of the macro.\r\nContinue?

mvc.main.view.panel.MacroParameterPanel.delay=Slowdown factor
mvc.main.view.panel.MacroParameterPanel.cycles=Cycles
mvc.main.view.panel.MacroParameterPanel.condition=Start condition
mvc.main.view.panel.MacroParameterPanel.repetition=Repetition
mvc.main.view.panel.MacroParameterPanel.time=Time

mvc.main.model.Macro.pending-changes=Macro has pending changes. Press Write to store the macro permanently.
mvc.main.model.Macro.saved-on-node=Macro is saved on node. Press Write to store the macro permanently.
mvc.main.model.Macro.permanently-stored-on-node=Macro is permanently stored on node.
mvc.main.model.Macro.not-loaded-from-node=Macro was not loaded from node.

mvc.main.view.panel.FlagListPanel.name=Flags
mvc.main.view.panel.FlagListPanel.emptyTable=No flags available on this node.

mvc.main.model.FlagTableModel.flag=Flag

mvc.main.view.panel.listener.AccessoryTableListener.accessory_transfer_pending_changes_before_test=Transfer pending accessory changes to node before test?
mvc.main.view.panel.listener.AccessoryTableListener.test=Test accessory

mvc.main.view.panel.MotorPortListPanel.name=Motor ports
mvc.main.view.panel.MotorPortListPanel.emptyTable=There are no motor ports for this node.
mvc.main.view.panel.MotorPortListPanel.absolutevalue=Absolute value:

mvc.main.view.panel.NodeListPanel$ResetDialog.title=Restart node
mvc.main.view.panel.NodeListPanel$ResetDialog.message=Are you sure you want to restart the node?
mvc.main.view.panel.NodeListPanel$ResetDialog.reset=Restart
mvc.main.view.panel.NodeListPanel$ResetDialog.cancel=Cancel
mvc.main.view.panel.NodeListPanel.title=Nodes
mvc.main.view.panel.NodeListPanel.bidibNodeFilesDescription=BiDiB-Nodes (*.xlsx)
mvc.main.view.panel.NodeListPanel.export-documentation.title=Generate Documentation
mvc.main.view.panel.NodeListPanel.export-documentation-failed.instruction=Generate documentation of node failed.
mvc.main.view.panel.NodeListPanel.export-documentation-failed=The creation of the documentation for the selected node failed.
mvc.main.view.panel.NodeListPanel.export-documentation-passed=Generate documentation passed and saved: {0}
mvc.main.view.panel.NodeListPanel.generate-default-labels.title=Generate DefaultLabels
mvc.main.view.panel.NodeListPanel.generate-default-labels-failed.instruction=Generate DefaultLabels of node failed.
mvc.main.view.panel.NodeListPanel.generate-default-labels-failed=The creation of the DefaultLabels for the selected node failed.
mvc.main.view.panel.NodeListPanel.generate-default-labels-passed=Generate DefaultLabels passed and saved: {0}
mvc.main.view.panel.NodeListPanel.bidibDefaultLabelFilesDescription=BiDiB-DefaultLabels (*.xml)

dialog.NodeLabelView.title=Change Node Label
dialog.NodeLabelPanel.nodeName=Label
dialog.NodeLabelPanel.productName=Product name
dialog.NodeLabelPanel.uid=UID
dialog.NodeLabelPanel.apply=Apply
dialog.NodeLabelPanel.cancel=Cancel

mvc.main.view.panel.NodePanel.title=Nodes
mvc.main.view.panel.ServoPortListPanel.name=Servo ports
mvc.main.view.panel.ServoPortListPanel.emptyTable=There are no servo ports for this node.
mvc.main.view.panel.ServoPortListPanel.absolutevalue=Absolute value:
mvc.main.view.panel.SoundPortListPanel.name=Sound ports
mvc.main.view.panel.SoundPortListPanel.emptyTable=There are no sound ports for this node.
mvc.main.view.panel.SoundPortListPanel.switch-port-title=Switch port type
mvc.main.view.panel.SoundPortListPanel.switch-port-confirm=Switch port to sound port?

mvc.main.view.panel.StatusButtonPanel.off=OFF
mvc.main.view.panel.StatusButtonPanel.off-tooltip=Current status is OFF. Press button to enable model time. 
mvc.main.view.panel.StatusButtonPanel.on=ON
mvc.main.view.panel.StatusButtonPanel.on-tooltip=Current status is ON. Press button to disable model time. 
mvc.main.view.panel.StatusButtonPanel.title=Status
mvc.main.view.statusbar.StatusBar.modeltime=This is the model time.
mvc.main.view.panel.SwitchPortListPanel.name=Switch ports
mvc.main.view.panel.SwitchPortListPanel.emptyTable=There are no switch ports for this node.
mvc.main.view.panel.SwitchPortListPanel.switch-port-title=Switch port type
mvc.main.view.panel.SwitchPortListPanel.switch-port-confirm=Switch port to switch port?
mvc.main.view.panel.EmptyPanel.name=Empty Panel

mvc.main.view.panel.SwitchPairPortListPanel.name=SwitchPair ports
mvc.main.view.panel.SwitchPairPortListPanel.emptyTable=There are no switchPair ports for this node.
mvc.main.view.panel.SwitchPairPortListPanel.switch-port-title=Switch port type
mvc.main.view.panel.SwitchPairPortListPanel.switch-port-confirm=Switch port to switchPair port?

mvc.main.view.panel.InfoPanel.name=Info
mvc.main.view.panel.InfoPanel.product-unknown=Unknown product
mvc.main.view.panel.InfoPanel.description=Description ..
mvc.main.view.panel.InfoPanel.productname=Productname ..
mvc.main.view.panel.InfoPanel.vendor=Vendor .......
mvc.main.view.panel.InfoPanel.username=Label ........
mvc.main.view.panel.InfoPanel.address=Address ......
mvc.main.view.panel.InfoPanel.protocol=Protocol .....
mvc.main.view.panel.InfoPanel.value=Value
mvc.main.view.panel.InfoPanel.unit=Unit

mvc.main.view.panel.ReverserPanel.name=Reverser
mvc.main.view.panel.ReverserPanel.loadcvfailed.message=Load CV values from node failed!
mvc.main.view.panel.ReverserPanel.loadcvfailed.title=Load CV values

mvc.main.view.panel.BasicOperationsPanel.name=Actions

mvc.common.view.table.ColorEditor.title=Pick a Color

mvc.common.view.cvdefinition.CvDefinitionTreeTableModel.column.cv=CV
mvc.common.view.cvdefinition.CvDefinitionTreeTableModel.column.description=Description
mvc.common.view.cvdefinition.CvDefinitionTreeTableModel.column.defaultvalue=Default
mvc.common.view.cvdefinition.CvDefinitionTreeTableModel.column.value=Value
mvc.common.view.cvdefinition.CvDefinitionTreeTableModel.column.newvalue=New value
mvc.common.view.cvdefinition.CvDefinitionTreeTableModel.column.mode=Mode

mvc.main.view.panel.CvDefinitionPanel.name=CV Definitions
mvc.main.view.panel.CvDefinitionPanel.menu.readcvs=Read CVs
mvc.main.view.panel.CvDefinitionPanel.menu.writecvs=Write CVs
mvc.main.view.panel.CvDefinitionPanel.menu.readcv=Read CV
mvc.main.view.panel.CvDefinitionPanel.menu.writecv=Write CV
mvc.main.view.panel.CvDefinitionPanel.toolbar.readallcv=Read all CV values from the node
mvc.main.view.panel.CvDefinitionPanel.toolbar.readallcv.alttext=Read CV values
mvc.main.view.panel.CvDefinitionPanel.toolbar.writeallcv=Write the changed CV values to the node
mvc.main.view.panel.CvDefinitionPanel.toolbar.writeallcv.alttext=Write CV values
mvc.main.view.panel.CvDefinitionPanel.editor.save=Memorize
mvc.main.view.panel.CvDefinitionPanel.editor.reset=Reset
mvc.main.view.panel.CvDefinitionPanel.editor.cveditor=CV-Editor
mvc.main.view.panel.CvDefinitionPanel.fileinfo.title=Info from XML-File
mvc.main.view.panel.CvDefinitionPanel.fileinfo.xmlfile=XML file
mvc.main.view.panel.CvDefinitionPanel.fileinfo.version=Version
mvc.main.view.panel.CvDefinitionPanel.fileinfo.lastchange=Last change
mvc.main.view.panel.CvDefinitionPanel.fileinfo.author=Author
mvc.main.view.panel.CvDefinitionPanel.fileinfo.description=Description
mvc.main.view.panel.CvDefinitionPanel.savedCvDescription=Saved CV Definitions
mvc.main.view.panel.CvDefinitionPanel.saveCvDescription=Save CV Definitions

mvc.main.view.panel.CvDefinitionPanel.import.tooltip=Import user-defined CV definition
mvc.main.view.panel.CvDefinitionPanel.filter=CV Definition files
mvc.main.view.panel.CvDefinitionPanel.copy-to-user-dir.tooltip=Create user-defined CV definition into the user directory
mvc.main.view.panel.CvDefinitionPanel.copy-to-user-dir.message=Copy CV definition from the Wizard into the user directory?
mvc.main.view.panel.CvDefinitionPanel.copy-to-user-dir.title=CV Definition
mvc.main.view.panel.CvDefinitionPanel.copy-to-user-dir.failed=Copy CV definition into the user directory failed.
mvc.main.view.panel.CvDefinitionPanel.exportToExcel.passed=Export CV data to Excel file passed.\r\nFile : {0}
mvc.main.view.panel.CvDefinitionPanel.exportToExcel.title=Export CV
mvc.main.view.panel.CvDefinitionPanel.import-to-user-dir.failed=Import CV definition into the user directory failed.\r\nReason: Invalid content.
mvc.main.view.panel.CvDefinitionPanel.import-to-user-dir.title=CV Definition

mvc.main.view.panel.CvDefinitionPanel.toolbar.loadfromfile=Load CV values from file
mvc.main.view.panel.CvDefinitionPanel.toolbar.loadfromfile.alttext=Load saved CV values from file
mvc.main.view.panel.CvDefinitionPanel.toolbar.savetofile=Save CV values to file
mvc.main.view.panel.CvDefinitionPanel.toolbar.savetofile.alttext=Save current CV values to file
mvc.main.view.panel.CvDefinitionPanel.toolbar.exportToExcel=Export the CV values to Excel file
mvc.main.view.panel.CvDefinitionPanel.toolbar.exportToExcel.alttext=Export the CV values to Excel file

mvc.main.view.cvdef.CvBitfieldValueEditor.rebootrequired=A reboot of the node is required if the value is changed.
mvc.main.view.cvdef.CvByteValueEditor.rebootrequired=A reboot of the node is required if the value is changed.
mvc.main.view.cvdef.CvIntegerValueEditor.rebootrequired=A reboot of the node is required if the value is changed.
mvc.main.view.cvdef.DccAccAddrEditor.decoderAddress=Decoder Address
mvc.main.view.cvdef.DccAccAddrEditor.decoderActive=Decoder enabled
mvc.main.view.cvdef.DccAccAddrEditor.decoderActive.tooltip=Controls if the decoder is enabled and handles the DCC commands
mvc.main.view.cvdef.DccAccAddrEditor.rcnAddress=First turnout address (RCN)
mvc.main.view.cvdef.DccAccAddrEditor.dccPacketAddress=First turnout address (DCC packet)
mvc.main.view.cvdef.DccAccAddrEditor.rebootrequired=A reboot of the node is required if the value is changed.
mvc.main.view.cvdef.DccAddrRGEditor.turnoutAddress=Turnout Address (RCN)
mvc.main.view.cvdef.DccAddrRGEditor.activatedOn=Activated on
mvc.main.view.cvdef.DccAddrRGEditor.dccPacketAddress=Turnout address (DCC packet)
mvc.main.view.cvdef.DccAddrRGEditor.rebootrequired=A reboot of the node is required if the value is changed.
mvc.main.view.cvdef.CvRadioValueEditor.rebootrequired=A reboot of the node is required if the value is changed.
mvc.main.view.cvdef.CvRadioValueEditor.offset=Offset
mvc.main.view.cvdef.CvDccLongAddrValueEditor.rebootrequired=A reboot of the node is required if the value is changed.
mvc.main.view.cvdef.CvDccLongAddrValueEditor.value=Value

mvc.main.view.cvdef.GBM16TReverserEditor.mode=Mode

mvc.main.view.panel.EmptyPanel.selectNodeFromList=Select a node from the node list with doubleclick.
mvc.main.view.panel.EmptyPanel.connect-to-system=The BiDiB-system is not connected.
Connect using toolbar or menu.
mvc.main.view.panel.EmptyPanel.no-connection-to-system-configured=No connection information to BiDiB-system available in the BiDiB-Wizard.
Please select COM-port or enter connection configuration before connecting.
mvc.main.view.panel.EmptyPanel.simulation-connection-configured=The currently selected configuration is a simulation.
Please select COM-port or enter connection configuration before connecting
if you don't want to work with simulated nodes.
mvc.main.view.panel.EmptyPanel.welcome=Welcome to the BiDiB-Wizard.
mvc.main.view.panel.TabPanel.emptyLabel=No node selected
mvc.main.view.panel.TabPanel.title=Node Details

mvc.stepcontrol.view.StepControlPanel.toolbar.readallcv=Read all CV values from the node
mvc.stepcontrol.view.StepControlPanel.toolbar.readallcv.alttext=Read CV values
mvc.stepcontrol.view.StepControlPanel.toolbar.writeallcv=Write the changed CV values to the node
mvc.stepcontrol.view.StepControlPanel.toolbar.writeallcv.alttext=Write CV values

mvc.stepcontrol.view.StepControlPanel.emptyTable=No aspects configured. Click here to create the first aspect.
mvc.stepcontrol.view.StepControlPanel.name=StepControl
mvc.stepcontrol.view.StepControlPanel.newAspect=New
mvc.stepcontrol.view.StepControlPanel.deleteAspect=Delete
mvc.stepcontrol.view.StepControlPanel.deleteAllAspects=Delete all
mvc.stepcontrol.view.StepControlPanel.deleteAllAspects.tooltip=Delete all aspects
mvc.stepcontrol.view.StepControlPanel.deleteAllAspects-confirm.instruction=Continue and delete all aspects?
mvc.stepcontrol.view.StepControlPanel.deleteAllAspects-confirm=Are you sure?
mvc.stepcontrol.view.StepControlPanel.deleteAllAspects-confirm.title=BiDiB Wizard
mvc.stepcontrol.view.StepControlPanel.importAspectsFromExcel=Import all aspects from Excel file
mvc.stepcontrol.view.StepControlPanel.importAspectsFromExcel.tooltip=Remove all aspects and import all aspects from Excel file
mvc.stepcontrol.view.StepControlPanel.load-aspects-from-excel-failed=Load aspect from Excel failed.
mvc.stepcontrol.view.StepControlPanel.load-aspects-from-excel=Load Aspects from Excel
mvc.stepcontrol.view.StepControlPanel.aspect_has_pending_changes=The edited aspect has pending changes. Discard and continue?
mvc.stepcontrol.view.StepControlPanel.pending_changes=Pending changes
mvc.stepcontrol.view.StepControlPanel.apply=Apply
mvc.stepcontrol.view.StepControlPanel.apply-changes-failed=Apply changes failed: {0}
mvc.stepcontrol.view.StepControlPanel.reset=Reset
mvc.stepcontrol.view.StepControlPanel.max_aspect_message=Maximum number of aspects reached.
mvc.stepcontrol.view.StepControlPanel.max_aspect_title=New aspect
mvc.stepcontrol.view.StepControlPanel.loading_cvvalues=Loading CV values for StepControl.
mvc.stepcontrol.view.StepControlPanel.aspect=Aspect
mvc.stepcontrol.view.StepControlPanel.position=Position
mvc.stepcontrol.view.StepControlPanel.opposite_position=Opp-Pos
mvc.stepcontrol.view.StepControlPanel.direct=Direct
mvc.stepcontrol.view.StepControlPanel.angle=Angle
mvc.stepcontrol.view.StepControlPanel.polarity=Polarity
mvc.stepcontrol.view.StepControlPanel.action=Action
mvc.stepcontrol.view.StepControlPanel.turntableType=TurnTable type
mvc.stepcontrol.view.StepControlPanel.occupancy=Occupancy
mvc.stepcontrol.view.StepControlPanel.pane-speed-and-accelaration=Speed and Accelaration
mvc.stepcontrol.view.StepControlPanel.speed=Speed
mvc.stepcontrol.view.StepControlPanel.accel=Accelerate
mvc.stepcontrol.view.StepControlPanel.decel=Deccelerate
mvc.stepcontrol.view.StepControlPanel.button.wizard=Configuration Wizard
mvc.stepcontrol.view.StepControlPanel.accessory.0=Flip
mvc.stepcontrol.view.StepControlPanel.accessory.1=Homing
mvc.stepcontrol.view.StepControlPanel.accessory.2=Sound
mvc.stepcontrol.view.StepControlPanel.create_new_aspect=Create new aspect with current position
mvc.stepcontrol.view.StepControlPanel.update_aspect=Update selected aspect with current position
mvc.stepcontrol.view.StepControlPanel.read_current_pos=Read current position
mvc.stepcontrol.view.StepControlPanel.unknown_error_aspect=Unknown aspect or error with aspect: {0}
mvc.stepcontrol.view.StepControlPanel.executing_aspect=Executing aspect: {0}
mvc.stepcontrol.view.StepControlPanel.active_aspect=Active aspect: {0}
mvc.stepcontrol.view.StepControlPanel.execution_state=Execution state: 
mvc.stepcontrol.view.StepControlPanel.operational_state=Operational state: 
mvc.stepcontrol.view.StepControlPanel.set_position=Set
mvc.stepcontrol.view.StepControlPanel.set_position.tooltip=Drive turntable to position value
mvc.stepcontrol.view.StepControlPanel.get_position=Get
mvc.stepcontrol.view.StepControlPanel.get_position.tooltip=Read the current position value
mvc.stepcontrol.view.StepControlPanel.additionalFunctions=Sound
mvc.stepcontrol.view.StepControlPanel.soundActive=Sound
mvc.stepcontrol.view.StepControlPanel.rotateFlip.tooltip=Rotate turntable 180 degrees
mvc.stepcontrol.view.StepControlPanel.left_steps_position=<<
mvc.stepcontrol.view.StepControlPanel.left_steps_position.tooltip=Rotate 10 steps to the left
mvc.stepcontrol.view.StepControlPanel.left_single_step_position=<
mvc.stepcontrol.view.StepControlPanel.left_single_step_position.tooltip=Rotate 1 steps to the left
mvc.stepcontrol.view.StepControlPanel.right_steps_position=>>
mvc.stepcontrol.view.StepControlPanel.right_steps_position.tooltip=Rotate 10 steps to the right
mvc.stepcontrol.view.StepControlPanel.right_single_step_position=>
mvc.stepcontrol.view.StepControlPanel.right_single_step_position.tooltip=Rotate 1 steps to the right
mvc.stepcontrol.view.StepControlPanel.set_position_title=Set position
mvc.stepcontrol.view.StepControlPanel.set_position_failed_message=Set the new position failed because the position is out of range: {0}

mvc.stepcontrol.view.StepControlPanel.write_cv_to_node_failed_message=Write CV to node failed.
mvc.stepcontrol.view.StepControlPanel.invalid_aspect_message=Write CV to node was aborted because an invalid aspect was detected.
mvc.stepcontrol.view.StepControlPanel.write_cv_title=Write CV

mvc.stepcontrol.view.StepControlPanel.importAspectsFromExcel=Import aspects
mvc.stepcontrol.view.StepControlPanel.importAspectsFromExcel.tooltip=Import aspects from Excel file

mvc.stepcontrol.view.StepControlPanel.dialog_add_aspect=Add Aspect

mvc.stepcontrol.view.StepControlPanel.script=Script

mvc.stepcontrol.view.ScriptPanel.selectScript=Select
mvc.stepcontrol.view.ScriptPanel.startScript=Start
mvc.stepcontrol.view.ScriptPanel.stopScript=Stop
mvc.stepcontrol.view.ScriptPanel.scriptDescription=StepControl Scriptfiles
mvc.stepcontrol.view.ScriptPanel.repeating=Repeating

mvc.stepcontrol.view.AspectEditorPanel.activate=Arrive at
mvc.stepcontrol.view.AspectEditorPanel.activate.tooltip=Press to move the turntable to the selected position
mvc.stepcontrol.view.AspectEditorPanel.apply=Memorize
mvc.stepcontrol.view.AspectEditorPanel.revert=Revert
mvc.stepcontrol.view.AspectEditorPanel.cancel=Cancel
mvc.stepcontrol.view.AspectEditorPanel.use_current_position=Use current position to set the aspect position
mvc.stepcontrol.view.AspectEditorPanel.use_current_opposite_position=Use current position to set the aspect opposite position
mvc.stepcontrol.view.AspectEditorPanel.calculate_opposite_position=Calculate the opposite position based on the configured position value
mvc.stepcontrol.view.AspectEditorPanel.set_calculated_position_title=Calculate position
mvc.stepcontrol.view.AspectEditorPanel.set_calculated_position_failed_message=The calculated position is out of range!

mvc.stepcontrol.view.CvConsoleView.title=CV Console
mvc.stepcontrol.view.CvConsoleView.clear_console=Clear

mvc.stepcontrol.view.ConfigurationWizard.title=StepControl Configuration
mvc.stepcontrol.view.ConfigurationWizard.L_FinishButton=Write CV
mvc.stepcontrol.view.ConfigurationWizard.L_FinishButtonMnem=W

mvc.stepcontrol.view.wizard.TableTypePanel.message=Please select the turntable type.

mvc.stepcontrol.view.wizard.StepMotorCharacteristicsPanel.message=Please specify the characteristics of the stepper motor.
mvc.stepcontrol.view.wizard.StepMotorCharacteristicsPanel.motorSize=Motor size
mvc.stepcontrol.view.wizard.StepMotorCharacteristicsPanel.stepCount=Step count
mvc.stepcontrol.view.wizard.StepMotorCharacteristicsPanel.gearing=Gearing
mvc.stepcontrol.view.wizard.StepMotorCharacteristicsPanel.gearRatio=Gear ratio
mvc.stepcontrol.view.wizard.StepMotorCharacteristicsPanel.backLash=Backlash
mvc.stepcontrol.view.wizard.StepMotorCharacteristicsPanel.microStepping=Micro stepping
mvc.stepcontrol.view.wizard.StepMotorCharacteristicsPanel.totalStepCount=Total steps (SPR)
mvc.stepcontrol.view.wizard.StepMotorCharacteristicsPanel.speedScale=Speed scale
mvc.stepcontrol.view.wizard.StepMotorCharacteristicsPanel.accelarationScale=Accelaration scale
mvc.stepcontrol.view.wizard.StepMotorCharacteristicsPanel.speed=Speed
mvc.stepcontrol.view.wizard.StepMotorCharacteristicsPanel.accel=Accelaration
mvc.stepcontrol.view.wizard.StepMotorCharacteristicsPanel.decel=Decelaration

mvc.stepcontrol.view.wizard.SummaryPanel.message=The following CV values are transferred to the node:
mvc.stepcontrol.view.wizard.SummaryPanel.turntableType=TurnTable type: {0}
mvc.stepcontrol.view.wizard.SummaryPanel.motorSize=Motor size: {0}
mvc.stepcontrol.view.wizard.SummaryPanel.current=Current moving: {0} mA, stopped: {1} mA
mvc.stepcontrol.view.wizard.SummaryPanel.gearing=Gearing: {0}:{1}, Backlash: {2}
mvc.stepcontrol.view.wizard.SummaryPanel.gearingNone=Gearing: none
mvc.stepcontrol.view.wizard.SummaryPanel.stepCount=Step count: {0}
mvc.stepcontrol.view.wizard.SummaryPanel.microStepping=Micro stepping: {0}
mvc.stepcontrol.view.wizard.SummaryPanel.totalStepCount=Total steps: {0}

mvc.stepcontrol.model.TurnTableType.linear=Transfer table or segment turntable
mvc.stepcontrol.model.TurnTableType.linear.icon=LinearTable.png
mvc.stepcontrol.model.TurnTableType.round=Turntable (360\u00ba)
mvc.stepcontrol.model.TurnTableType.round.icon=RoundTable.png
mvc.stepcontrol.model.MotorSizeType.nema8=NEMA 8
mvc.stepcontrol.model.MotorSizeType.nema11=NEMA 11
mvc.stepcontrol.model.MotorSizeType.nema13=NEMA 13
mvc.stepcontrol.model.MotorSizeType.nema17=NEMA 17
mvc.stepcontrol.model.MotorSizeType.nema23=NEMA 23
mvc.stepcontrol.model.Gearing.no=No
mvc.stepcontrol.model.Gearing.yes=Yes
mvc.stepcontrol.model.MicroStepsEnum.step8=8
mvc.stepcontrol.model.MicroStepsEnum.step16=16
mvc.stepcontrol.model.MicroStepsEnum.step32=32
mvc.stepcontrol.model.MicroStepsEnum.step64=64
mvc.stepcontrol.model.MicroStepsEnum.step128=128
mvc.stepcontrol.model.MicroStepsEnum.step256=256

mvc.stepcontrol.model.MovementScaleEnum.scale0_1=0.1\u00B0/s
mvc.stepcontrol.model.MovementScaleEnum.scale1=1\u00B0/s
mvc.stepcontrol.model.AccelarationScaleEnum.scale0_1=0.1\u00B0/s\u00B2
mvc.stepcontrol.model.AccelarationScaleEnum.scale1=1\u00B0/s\u00B2

mvc.main.view.table.AbstractEmptyTable.chooseLabel=Please choose a name.
mvc.main.view.table.AbstractEmptyTable.empty_table=No data available.

mvc.preferences.controller.PreferencesController.title-error=Error
mvc.preferences.controller.PreferencesController.fetch-port-identifiers-failed=Fetch port identifiers failed.\r\nThis can be caused by an old RXTXComm.jar in the extensions directory of the Java installation ({0}) !\r\nPlease remove the RXTXComm.jar from this directory before you run the BiDiB-Wizard.

mvc.preferences.view.PreferencesView.title=Preferences
mvc.preferences.view.PreferencesView.save=Save
mvc.preferences.view.PreferencesView.cancel=Cancel
mvc.preferences.view.PreferencesView.tab-connection=Connection
mvc.preferences.view.PreferencesView.tab-connection.tooltip=Connection
mvc.preferences.view.PreferencesView.tab-misc=Miscellaneous
mvc.preferences.view.PreferencesView.tab-misc.tooltip=Miscellaneous
mvc.preferences.view.PreferencesView.tab-time=Time
mvc.preferences.view.PreferencesView.tab-time.tooltip=Time
mvc.preferences.view.PreferencesView.tab-railcomplus=RailCom Plus
mvc.preferences.view.PreferencesView.tab-railcomplus.tooltip=RailCom Plus
mvc.preferences.view.PreferencesView.tab-wizardsettings=Wizard Settings
mvc.preferences.view.PreferencesView.tab-wizardsettings.tooltip=Wizard Settings configuration support.
mvc.preferences.view.PreferencesView.tab-experimentalsettings=Experimental Settings
mvc.preferences.view.PreferencesView.tab-experimentalsettings.tooltip=Experimental Settings configuration support.

mvc.preferences.view.panel.MiscPanel.title=Miscellaneous
mvc.preferences.view.panel.MiscPanel.serialPort=Serial port
mvc.preferences.view.panel.MiscPanel.netBidib=NetBiDiB port
mvc.preferences.view.panel.MiscPanel.speedometer=Speedometer
mvc.preferences.view.panel.MiscPanel.serialOverTcpPort=Serial-over-TCP port
mvc.preferences.view.panel.MiscPanel.serialPortProvider=Serial port provider
mvc.preferences.view.panel.MiscPanel.labelPath=Directory for BiDiB configuration files
mvc.preferences.view.panel.MiscPanel.logFilePath=Directory for log-files
mvc.preferences.view.panel.MiscPanel.serialOverTcpMock=Serial-over-TCP Simulation
mvc.preferences.view.panel.MiscPanel.serialMock=Serial simulation
mvc.preferences.view.panel.MiscPanel.powerUser=Power user
mvc.preferences.view.panel.MiscPanel.showBoosterTable=Show booster table by default
mvc.preferences.view.panel.MiscPanel.alwaysShowProductNameInTree=Always show product name in node tree
mvc.preferences.view.panel.MiscPanel.ignoreWaitTimeout=Ignore timeout while waiting for response
mvc.preferences.view.panel.MiscPanel.ignoreWrongReceiveMessageNumber=Ignore and adjust wrong RcvMessageNumber value
mvc.preferences.view.panel.MiscPanel.ignoreFlowControl=Do not use flowcontrol for communication with interface
mvc.preferences.view.panel.TimePanel.title=Time
mvc.preferences.view.panel.TimePanel.timeFactor=Multiplier
mvc.preferences.view.panel.TimePanel.startTime=Start time
mvc.preferences.view.panel.TimePanel.dayOfWeek=Day of week
mvc.preferences.view.panel.MiscPanel.firmwarePacketTimeout=Timeout for firmware packets
mvc.preferences.view.panel.MiscPanel.useHotPlugController=Use USB HotPlug Controller
mvc.preferences.view.panel.MiscPanel.serialUseHardwareFlowControl=Use hardware flowcontrol for serial port
mvc.preferences.view.panel.MiscPanel.logFileAppend=Append logfile
mvc.preferences.view.panel.MiscPanel.logFileAppend.tooltip=Append logfile or discard old logfile and create new logfile at application start

mvc.preferences.view.panel.RailcomPlusPanel.title=RailCom Plus

mvc.preferences.view.panel.WizardSettingsPanel.showTipOfDay=Show tip of day
mvc.preferences.view.panel.WizardSettingsPanel.csQueryEnabled=Query command station enabled
mvc.preferences.view.panel.WizardSettingsPanel.localPingEnabled=Local ping to master node enabled
mvc.preferences.view.panel.WizardSettingsPanel.showActionInLastTab=Show Actions in last tab of node details view
mvc.preferences.view.panel.WizardSettingsPanel.allBoosterOnDoNotConfirmSwitch=Hide 'All booster on' confirmation dialog
mvc.preferences.view.panel.WizardSettingsPanel.allBoosterOnDoNotSendSoftStop=Do not send SoftStop on 'All booster on'
mvc.preferences.view.panel.WizardSettingsPanel.m4SupportEnabled=M4 Support enabled
mvc.preferences.view.panel.WizardSettingsPanel.initializeLocoDecodersEnabled=Initialize loco decoders after connect enabled
mvc.preferences.view.panel.WizardSettingsPanel.performResetAfterConnect=Send Reset command after connect
mvc.preferences.view.panel.WizardSettingsPanel.nodeExportAppendDateEnabled=Append date to node export filename
mvc.preferences.view.panel.WizardSettingsPanel.language=Language

mvc.preferences.view.panel.ExperimentalSettingsPanel.simulationFileName=Simulation filename
mvc.preferences.view.panel.ExperimentalSettingsPanel.select-simulation=Select
mvc.preferences.view.panel.ExperimentalSettingsPanel.usbStickBasisPort=USB-StickBasis Port
mvc.preferences.view.panel.ExperimentalSettingsPanel.speedometerTimeout=Speedometer Timeout
mvc.preferences.view.panel.ExperimentalSettingsPanel.locoVideoEnabled=Loco Video enabled
mvc.preferences.view.panel.ExperimentalSettingsPanel.locoVideoUri=Loco Video URI
mvc.preferences.view.panel.ExperimentalSettingsPanel.javaSerializationEnabled=Use Java serialization for node export (restart required)
mvc.preferences.view.panel.ExperimentalSettingsPanel.netBidibUniqueId=NetBiDiB-Client UniqueId

utils.IntegerEditor.revertTitle=Invalid Text Entered
utils.IntegerEditor.revertMessage=The value must be an integer between %1$d and %2$d.\nYou can either continue editing or revert to the last valid value.
utils.IntegerEditor.revert=Revert
utils.IntegerEditor.edit=Edit

comm.bidib.BidibCommunication.bidib-reset=Reset the BiDiBus.
comm.bidib.BidibCommunication.bidib-reset-passed=Reset the BiDiBus passed.
comm.bidib.BidibCommunication.bidib-nodes-loaded=Loaded nodes from BiDiBus.
comm.bidib.BidibCommunication.bidib-load-nodes-failed=Load nodes from BiDiBus failed!
comm.bidib.BidibCommunication.bidib-communication-failure=Communication with master was not established! Please check logfile.
comm.bidib.BidibCommunication.bidib-fetched-root=Fetched interface node. Start loading subnodes ...
comm.bidib.BidibCommunication.bidib-release-and-reload-rootnode=Release interface node and reload nodes.
comm.bidib.BidibCommunication.bidib-wait-restart-rootnode=Wait for restart of interface node and reload nodes.
comm.bidib.BidibCommunication.bidib-reconnect-with-next-baudrate=Try to reconnect with next baudrate.
comm.bidib.BidibCommunication.logon-received=netBidib: Logon received.

comm.CommunicationFactory.opening-port=Start opening communication port.
comm.CommunicationFactory.open-port=Start open communication port.
comm.CommunicationFactory.no-port-selected=No comm port selected, do not create BidibCommunication.
comm.CommunicationFactory.open-port-failed=Open communication port failed: 
comm.CommunicationFactory.open-port-passed=Open communication port passed:
comm.CommunicationFactory.establish-communication-failed=Establish communication with interface failed.
comm.CommunicationFactory.check-debug-mode=Check if the GBMboost is running in DEBUG mode.
comm.CommunicationFactory.close-port-passed=Close communication port passed:

mvc.main.model.Node.column.cv=CV
mvc.main.model.Node.column.description=Description
mvc.main.model.Node.column.value=Value
mvc.main.model.Node.column.newvalue=New value
mvc.main.model.Node.column.mode=Mode

mvc.main.view.component.BulkSwitchNodeOperationsDialog.title=Bulk Switch Operations
mvc.main.view.component.BulkSwitchNodeOperationsDialog.perform=Perform
mvc.main.view.component.BulkSwitchNodeOperationsDialog.cancel=Cancel

mvc.dmx.view.DmxModelerView.title=DMX Modeler
mvc.dmx.model.DmxChannel.label=DMX Channel

mvc.dmx.view.DmxSceneryView.title=DMX Sceneries

mvc.dmx.view.panel.DmxChartPanel.add-point=Add point
mvc.dmx.view.panel.DmxChartPanel.remove-point=Remove point
mvc.dmx.view.panel.DmxChartPanel.set-port=Set port
mvc.dmx.view.panel.DmxChartPanel.add-macro=Set macro
mvc.dmx.view.panel.DmxChartPanel.set-action=Set action
mvc.dmx.view.panel.DmxChartPanel.add-point-failed=Add new point failed.

mvc.dmx.view.panel.DmxModelerPanel.brightness=Brightness [%]
mvc.dmx.view.panel.DmxModelerPanel.time-seconds=Time [s]
mvc.dmx.view.panel.DmxModelerPanel.time-milliseconds=Time [ms]

mvc.dmx.view.scenery.SceneryPanel.scenery=Scenery
mvc.dmx.view.scenery.SceneryPanel.open-viewer=Open viewer
mvc.dmx.view.scenery.SceneryPanel.new-scenery=New scenery
mvc.dmx.view.scenery.SceneryPanel.import-scenery=Import scenery
mvc.dmx.view.scenery.SceneryPanel.export-scenery=Export scenery
mvc.dmx.view.scenery.SceneryPanel.export-all-sceneries=Export all sceneries
mvc.dmx.view.scenery.SceneryPanel.transform-scenery=Transform scenery to macro
mvc.dmx.view.scenery.SceneryPanel.menu.add-dmx-channel=Add DMX channel
mvc.dmx.view.scenery.SceneryPanel.menu.remove-dmx-channel=Remove
mvc.dmx.view.scenery.SceneryPanel.menu.add-port=Add port
mvc.dmx.view.scenery.SceneryPanel.menu.remove-port=Remove port
mvc.dmx.view.scenery.SceneryPanel.menu.change-color=Change line color
mvc.dmx.view.scenery.SceneryPanel.reset=Reset
mvc.dmx.view.scenery.SceneryPanel.apply=Apply
mvc.dmx.view.scenery.SceneryPanel.sceneriesDescription=DMX Sceneries files
mvc.dmx.view.scenery.SceneryPanel.scenery-name=Scenery name
mvc.dmx.view.scenery.SceneryPanel.macro-number=Macro
mvc.dmx.view.scenery.SceneryPanel.dimm-stretch-up=Fade in
mvc.dmx.view.scenery.SceneryPanel.dimm-stretch-down=Fade out

mvc.dmx.view.scenery.SceneryPanel.dialog.remove-port.title=Remove port
mvc.dmx.view.scenery.SceneryPanel.dialog.remove-port.message=The port can't be removed because it is still assigned in the scenery: {0}

mvc.dmx.view.scenery.SceneryPanel.save_to_directory=Save to directory ...
mvc.dmx.view.scenery.SceneryPanel.dialog.warn=Warn
mvc.dmx.view.scenery.SceneryPanel.dialog.export_error=Error
mvc.dmx.view.scenery.SceneryPanel.dialog.export_scenery_failed=Export scenery ''{0}'' to file failed.
mvc.dmx.view.scenery.SceneryPanel.dialog.no_scenery_selected=No scenery selected.
mvc.dmx.view.scenery.SceneryPanel.dialog.selected_macro_not_available=The selected macro is not available: {0}
mvc.dmx.view.scenery.SceneryPanel.dialog.pending_changes=Pending scenery changes detected. Save scenery before continue?
mvc.dmx.view.scenery.SceneryPanel.dialog.no_scenery_or_points=No scenery selected or no points in scenery defined.

mvc.dmx.view.scenery.SceneryPanel.message.errors_detected=The following errors were detected:\n
mvc.dmx.view.scenery.SceneryPanel.error-port-without-action=The scenery point has no action assigned. Remove port or set an action. Time offset: {0}, DMX channel: {1}
mvc.dmx.view.scenery.SceneryPanel.error-port-without-port-or-macro=The scenery point has no port and no macro assigned. Time offset: {0}, DMX channel: {1}

mvc.dmx.view.scenery.DmxChannelSelectionPanel.title=Select DMX channels
mvc.dmx.view.scenery.DmxChannelSelectionPanel.cancel=Cancel
mvc.dmx.view.scenery.DmxChannelSelectionPanel.apply=Apply

mvc.dmx.view.scenery.PortSelectionPanel.title=Select ports
mvc.dmx.view.scenery.PortSelectionPanel.cancel=Cancel
mvc.dmx.view.scenery.PortSelectionPanel.apply=Apply

# booster table
mvc.booster.view.BoosterTableView.title=Booster Table
mvc.booster.view.BoosterTableView.empty_table=No boosters available
mvc.booster.view.BoosterTableTableModel.uniqueId=Unique ID
mvc.booster.view.BoosterTableTableModel.description=Description
mvc.booster.view.BoosterTableTableModel.status=Status
mvc.booster.view.BoosterTableTableModel.csStatus=CS-Status
mvc.booster.view.BoosterTableTableModel.temperature=Temp.
mvc.booster.view.BoosterTableTableModel.voltage=Voltage
mvc.booster.view.BoosterTableTableModel.maxCurrent=max. Current
mvc.booster.view.BoosterTableTableModel.current=Current
mvc.booster.view.BoosterTableTableModel.control=DCC Source

mvc.booster.view.BoosterTableMenu.boosterOn=Booster on
mvc.booster.view.BoosterTableMenu.boosterOff=Booster off

org.bidib.jbidibc.core.enumeration.BoosterControl.connect.tooltip=Connected to DCC of BiDiB bus
org.bidib.jbidibc.core.enumeration.BoosterControl.local.tooltip=Not connected to DCC of BiDiB bus
org.bidib.jbidibc.core.enumeration.BoosterControl.remote.tooltip=Remote source for DCC

# feedback position table
mvc.position.view.FeedbackPositionView.title=Feedback Positions Table
mvc.position.view.FeedbackPositionView.node-filter=Filter
mvc.position.view.FeedbackPositionListPanel.empty_table=No feedback positions available
mvc.position.model.PositionFeedbackPort.label=Position
mvc.position.view.FeedbackPositionListPanel$FeedbackPositionListMenu.clearAddressesAndPortStatus=Clear addresses and port status
mvc.position.view.FeedbackPositionListPanel$FeedbackPositionListMenu.openCarDialog=Open Car controller
mvc.position.view.FeedbackPositionListPanel$FeedbackPositionListMenu.openPomDialog=Open POM programmer

# loco table
mvc.locolist.view.LocoTableView.title=Loco Table
mvc.locolist.view.LocoTableView.empty_table=No locos available
mvc.locolist.view.LocoTableView.queryLocoList=Query
mvc.locolist.view.LocoTableView.address=Address
mvc.locolist.view.LocoTableView.csQueryType=Type
mvc.locolist.view.LocoTableTableModel.address=Address
mvc.locolist.view.LocoTableTableModel.name=Name
mvc.locolist.view.LocoTableTableModel.speed=Speed
mvc.locolist.view.LocoTableTableModel.direction=Direction
mvc.locolist.view.LocoTableTableModel.active=Active
mvc.locolist.view.LocoTableTableModel.speedSteps=Speed steps
mvc.locolist.view.LocoTableTableModel.functionsLight=Light
mvc.locolist.view.LocoTableTableModel.functions1To4=Functions 1..4
mvc.locolist.view.LocoTableTableModel.functions5To12=Functions 5..12
mvc.locolist.view.LocoTableTableModel.functions13To20=Functions 13..20
mvc.locolist.view.LocoTableTableModel.functions21To28=Functions 21..28
mvc.locolist.view.LocoListMenu.openLocoDialog=Open Loco controller
mvc.locolist.view.LocoListMenu.openPomDialog=Open POM programmer
mvc.locolist.view.LocoListMenu.pushToMouse=Push to Mouse
mvc.locolist.view.LocoListMenu.selectIndex.message=Select the loco table index
mvc.locolist.view.LocoListMenu.selectIndex.title=Push to Mouse

mvc.locolist.view.PushToMouseDialog.title=Push loco list to Mouse
mvc.locolist.view.PushToMouseDialog.message=Select the locos that will be pushed to the mouse.
mvc.locolist.view.PushToMouseDialog.cancel=Cancel
mvc.locolist.view.PushToMouseDialog.continue=Continue

mvc.locolist.view.wizard.PushToMouseWizard.title=Push loco list to Mouse
mvc.locolist.view.wizard.PushToMouseWizard.next=Next
mvc.locolist.view.wizard.PushToMouseWizard.back=Back
mvc.locolist.view.wizard.PushToMouseWizard.cancel=Cancel
mvc.locolist.view.wizard.PushToMouseWizard.finish=Finish

mvc.locolist.view.wizard.WelcomePage.title=Push loco list to Mouse
mvc.locolist.view.wizard.WelcomePage.description=This wizard leads through the process to upload the locos to the mouse.
mvc.locolist.view.wizard.WelcomePage.content.text=Text
mvc.locolist.view.wizard.WelcomePage.content.continue=To continue, click Next.

mvc.locolist.view.wizard.SelectLocoPage.title=Select locos
mvc.locolist.view.wizard.SelectLocoPage.description=Select the locos that should be transfered to the mouse.
mvc.locolist.view.wizard.SelectLocoPage.load=Load
mvc.locolist.view.wizard.SelectLocoPage.save=Save
mvc.locolist.view.wizard.SelectLocoPage.filter=Loco library
mvc.locolist.view.wizard.SelectLocoPage.save-failed.instruction=Save the loco library failed.
mvc.locolist.view.wizard.SelectLocoPage.save-failed.title=Save loco library
mvc.locolist.view.wizard.SelectLocoPage.load-failed.instruction=Load the loco library failed.
mvc.locolist.view.wizard.SelectLocoPage.load-failed.title=Load loco library

mvc.locolist.view.wizard.CompletionPage.title=Completing the Mouse upload
mvc.locolist.view.wizard.CompletionPage.description=You have successfully uploaded the loco library to the mouse.
mvc.locolist.view.wizard.CompletionPage.description.waiting=The loco library is transfered to the mouse. The result of the operation is displayed below:
mvc.locolist.view.wizard.CompletionPage.result.pending=The transfer of the loco library is prepared.
mvc.locolist.view.wizard.CompletionPage.result.failed=The transfer of the loco library failed.
mvc.locolist.view.wizard.CompletionPage.result.passed=The transfer of the loco library passed.

# ping table
mvc.ping.view.PingTableView.title=Ping Table
mvc.ping.view.PingTableView.empty_table=No nodes available
mvc.ping.view.PingTableTableModel.uniqueId=Unique ID
mvc.ping.view.PingTableTableModel.description=Description
mvc.ping.view.PingTableTableModel.status=Status
mvc.ping.view.PingTableTableModel.interval=Ping-Interval

# console
mvc.console.view.ConsoleView.title=Console
mvc.console.view.ConsoleView.clear_console=Clear

# railcom plus view
mvc.railcomplus.view.RailcomPlusView.title=RailCom Plus
mvc.railcomplus.view.RailcomPlusView.tid=TID
mvc.railcomplus.view.RailcomPlusView.read_tid=Read TID
mvc.railcomplus.view.RailcomPlusView.update_sid=Update SID
mvc.railcomplus.view.RailcomPlusView.update_tid=Update TID
mvc.railcomplus.view.RailcomPlusView.ping_once_p0=PING ONCE P0
mvc.railcomplus.view.RailcomPlusView.ping_once_p1=PING ONCE P1
mvc.railcomplus.view.RailcomPlusView.ping=PING
mvc.railcomplus.view.RailcomPlusView.ping_off=PING OFF
mvc.railcomplus.view.RailcomPlusView.find_p0=FIND P0
mvc.railcomplus.view.RailcomPlusView.find_p1=FIND P1
mvc.railcomplus.view.RailcomPlusView.empty_table=No RailCom+ decoders available
mvc.railcomplus.view.RailcomPlusView.clear_console=Clear

mvc.railcomplus.view.RailcomPlusTableTableModel.manufacturer=Manufacturer
mvc.railcomplus.view.RailcomPlusTableTableModel.decmun=Decoder MUN
mvc.railcomplus.view.RailcomPlusTableTableModel.address=Address

mvc.railcomplus.controller.RailcomPlusController.no_commandstation_available=No command station node available! Operation aborted!
mvc.railcomplus.controller.RailcomPlusController.no_address_specified=No decoder address specified

mvc.pomupdate.view.PomUpdateView.title=POM Decoder Update
mvc.pomupdate.view.PomUpdateView.decoderFile=Decoder File
mvc.pomupdate.view.PomUpdateView.select-decoderfile=Select
mvc.pomupdate.view.PomUpdateView.select-decoderfile.prompt=Select the decoder firmware for the update
mvc.pomupdate.view.PomUpdateView.show-decoderfile-info=Info
mvc.pomupdate.view.PomUpdateView.prepare-update=Prepare Update
mvc.pomupdate.view.PomUpdateView.prepare-force-update=Force Update
mvc.pomupdate.view.PomUpdateView.perform-update=Perform Update
mvc.pomupdate.view.PomUpdateView.empty_table=No decoder addresses available
mvc.pomupdate.view.PomUpdateView.addAddress=Add decoder address
mvc.pomupdate.view.PomUpdateView.removeAddress=Remove decoder address
mvc.pomupdate.view.PomUpdateView.loadDecoderInfo=Load decoder info
mvc.pomupdate.view.PomUpdateView.enterDecoderAddress.title=Decoder Address
mvc.pomupdate.view.PomUpdateView.enterDecoderAddress.message=Enter decoder address:
mvc.pomupdate.view.PomUpdateView.enterDecoderAddress.buttonAdd=Add
mvc.pomupdate.view.PomUpdateView.enterDecoderAddress.buttonCancel=Cancel
mvc.pomupdate.view.PomUpdateView.load-firmware-failed=Load decoder firmware from file failed.
mvc.pomupdate.view.PomUpdateView.invalid-firmware-file=The file does not contain a valid decoder firmware.
mvc.pomupdate.view.PomUpdateTableModel.address=Address
mvc.pomupdate.view.PomUpdateTableModel.vendor=Vendor
mvc.pomupdate.view.PomUpdateTableModel.model=Version (Model)
mvc.pomupdate.view.PomUpdateTableModel.prepareProgess=Prepare progress
mvc.pomupdate.view.PomUpdateTableModel.performProgess=Perform progress

mvc.pomupdate.view.DecoderFirmwareInfoDialog.title=Decoder firmware info
mvc.pomupdate.view.DecoderFirmwareInfoDialog.close=Close

mvc.common.model.BaudRateType.19200=for firmware update
mvc.common.model.BaudRateType.115200=for debug interface

mvc.debug.view.DebugInterfaceView.title=Debug Interface
mvc.debug.view.DebugInterfaceView.refresh=R
mvc.debug.view.DebugInterfaceView.connect=Connect
mvc.debug.view.DebugInterfaceView.disconnect=Disconnect
mvc.debug.view.DebugInterfaceView.selectedPort=Port
mvc.debug.view.DebugInterfaceView.select-debug-port.prompt=Select debug port in settings
mvc.debug.view.DebugInterfaceView.selectedBaudRate=Baudrate
mvc.debug.view.DebugInterfaceView.lineEnding=Send on enter
mvc.debug.view.DebugInterfaceView.addTimestamps=Add timestamps
mvc.debug.view.DebugInterfaceView.logToFile=Log to file
mvc.debug.view.DebugInterfaceView.logFile=Log-File
mvc.debug.view.DebugInterfaceView.filterLogFile=Logfiles
mvc.debug.view.DebugInterfaceView.select-logfile=Select
mvc.debug.view.DebugInterfaceView.transmitText=Send
mvc.debug.view.DebugInterfaceView.transmitText.prompt=Enter text to transmit
mvc.debug.view.DebugInterfaceView.transmit=Send
mvc.debug.view.DebugInterfaceView.selectFile=Select
mvc.debug.view.DebugInterfaceView.transmitFile=File
mvc.debug.view.DebugInterfaceView.transmitFile.prompt=Select file to transmit
mvc.debug.view.DebugInterfaceView.filter=Firmware files
mvc.debug.view.DebugInterfaceView.clear_console=Clear
mvc.debug.view.DebugInterfaceView.copyAllToClipboard=Copy all to clipboard
mvc.debug.view.DebugInterfaceView.save_to_file=Save ...
mvc.debug.view.DebugInterfaceView.save_selected_to_file=Save selected text ...
mvc.debug.view.DebugInterfaceView.savedLogFilesDescription=Logfiles (*.log)
mvc.debug.view.DebugInterfaceView.tc9SpeedSupport=TC9-Support: Speed to clipboard

mvc.debug.view.DebugInterfaceView.title-error=Error
mvc.debug.view.DebugInterfaceView.fetch-port-identifiers-failed=Fetch port identifiers failed.\r\nThis can be caused by an old RXTXComm.jar in the extensions directory of the Java installation ({0}) !\r\nPlease remove the RXTXComm.jar from this directory before you run the BiDiB-Wizard.

mvc.debug.view.FileTransferProgressDialog.title=File transfer
mvc.debug.view.FileTransferProgressDialog.cancel=Cancel
mvc.debug.view.FileTransferProgressDialog.progress=Progress

mvc.debug.controller.DebugInterfaceController.select-baudrate=Select a baudrate for the debug interface!
mvc.debug.controller.DebugInterfaceController.select-port=Select a port for the debug interface!

mvc.nodedebug.view.DebugConsoleView.title=Debug Console
mvc.nodedebug.view.DebugConsoleView.transmitText=Send
mvc.nodedebug.view.DebugConsoleView.transmitText.prompt=Enter text to transmit
mvc.nodedebug.view.DebugConsoleView.transmit=Send
mvc.nodedebug.view.DebugConsoleView.clear_console=Clear
mvc.nodedebug.view.DebugConsoleView.copyAllToClipboard=Copy all to clipboard

mvc.script.view.NodeScriptView.title=NodeScript
mvc.script.view.NodeScriptView.scriptFile=Script file
mvc.script.view.NodeScriptView.select-nodescript=Select
mvc.script.view.NodeScriptView.save-nodescript=Save
mvc.script.view.NodeScriptView.load-nodescript=Load
mvc.script.view.NodeScriptView.filter=NodeScript files
mvc.script.view.NodeScriptView.apply-on-node=Apply
mvc.script.view.NodeScriptView.selectedNode=Node
mvc.script.view.NodeScriptView.preview-script=Preview
mvc.script.view.NodeScriptView.save-nodescript-failed=Save nodeScript to file failed.
mvc.script.view.NodeScriptView.load-nodescript-failed=Load nodeScript from file failed.

mvc.script.view.NodeScriptPreView.title=NodeScript Preview

mvc.script.view.input.InputParametersDialog.input-args.ok=Ok
mvc.script.view.input.InputParametersDialog.input-args.cancel=Cancel
mvc.script.view.input.InputParametersDialog.input-args.title=Input parameters
mvc.script.view.input.InputParametersDialog.input-args.instruction=Select input parameters
mvc.script.view.input.InputParametersDialog.input-args.text=Please select or enter the parameters that are used in the script.
mvc.script.view.input.InputParametersDialog.preventReplaceLabels=Prevent replace labels for accessory, macro and ports

mvc.script.view.wizard.NodeScriptWizard.title=BiDiB Node Configurator
mvc.script.view.wizard.NodeScriptWizard.next=Next
mvc.script.view.wizard.NodeScriptWizard.back=Back
mvc.script.view.wizard.NodeScriptWizard.cancel=Cancel
mvc.script.view.wizard.NodeScriptWizard.finish=Finish
mvc.script.view.wizard.NodeScriptWizard.load-nodescriptresources-failed.instruction=Load NodeScript sources failed
mvc.script.view.wizard.NodeScriptWizard.load-nodescriptresources-failed.text=Load NodeScripts from the configured sources failed.

mvc.script.view.wizard.WelcomePage.title=Welcome to the BiDiB Node Configurator
mvc.script.view.wizard.WelcomePage.description=The Node Configurator will guide you through the configuration of the BiDiB nodes for predefined applications.
mvc.script.view.wizard.WelcomePage.content.text=The Node Configurator helps you to configure the selected node in an easy way after you choose the category of application from the provided samples.
mvc.script.view.wizard.WelcomePage.content.continue=To continue, click Next.

mvc.script.view.wizard.SelectCategoryPage.title=Choose your application category
mvc.script.view.wizard.SelectCategoryPage.description=Choose the accessory you want to configure.
mvc.script.view.wizard.SelectCategoryPage.configuration.missing=Configuration missing (/data/nodescript/nodeScriptSources.xml)

mvc.script.view.wizard.SelectApplicationPage.title=Choose your application
mvc.script.view.wizard.SelectApplicationPage.description=Choose the application you want to configure.
mvc.script.view.wizard.SelectApplicationPage.application=Application
mvc.script.view.wizard.SelectApplicationPage.info=Info
mvc.script.view.wizard.SelectApplicationPage.tab_user=User
mvc.script.view.wizard.SelectApplicationPage.tab_installation=Installation
mvc.script.view.wizard.SelectApplicationPage.file=File: {0}

mvc.script.view.wizard.ScriptInputParametersPage.title=Select input values
mvc.script.view.wizard.ScriptInputParametersPage.description=Select the input parameters for the script.

mvc.script.view.wizard.CompletionPage.title=Completing the BiDiB Node Configurator
mvc.script.view.wizard.CompletionPage.description=You have successfully configured your node for the selected application.
mvc.script.view.wizard.CompletionPage.content.finish=To close the Node Configurator, click Finish.
mvc.script.view.wizard.CompletionPage.content.aborted=The execution of the nodeSript failed. Click Cancel to close the Node Configurator.
mvc.script.view.wizard.CompletionPage.content.aborted-script-errors=The execution of the nodeSript was aborted due to script errors. Click Cancel to close the Node Configurator.
mvc.script.view.wizard.CompletionPage.content.problem=A problem was detected. Click Cancel to close the Node Configurator.
mvc.script.view.wizard.CompletionPage.content.problem-script-warnings=The execution the of NodeScript has finished with script warnings. Please report this error in the Forum to get the script fixed.
mvc.script.view.wizard.CompletionPage.content.problem-script-errors=The execution the of NodeScript has finished with script errors. Click Cancel to close the Node Configurator.
mvc.script.view.wizard.CompletionPage.content.waiting=Waiting for termination of script.
mvc.script.view.wizard.CompletionPage.description.waiting=The configuration for the selected application is transfered to the BiDiB node. The result of the operation is displayed below:

mvc.script.controller.NodeScriptController.prepare-script.title=Prepare NodeScript
mvc.script.controller.NodeScriptController.prepare-script-failed.instruction=Get input parameters for NodeScript failed!
mvc.script.controller.NodeScriptController.prepare-script-failed=Preparation of NodeScript failed!
mvc.script.controller.NodeScriptController.prepare-script-failed.input-params-error=Get input parameters for NodeScript failed!
mvc.script.controller.NodeScriptController.prepare-script-cancelled.instruction=The preparation of the NodeScript is aborted!
mvc.script.controller.NodeScriptController.prepare-script-cancelled.node-requirements-error=The requirements for the selected NodeScript are not fulfilled! The current VID / PID is not supported.
mvc.script.controller.NodeScriptController.render-script.title=Processing NodeScript
mvc.script.controller.NodeScriptController.render-script-failed.instruction=Pre-Processing of NodeScript failed!
mvc.script.controller.NodeScriptController.render-script-failed=Pre-Processing of NodeScript failed!
mvc.script.controller.NodeScriptController.render-script-failed.parse-error=Pre-Processing of NodeScript failed because of a parse error!
mvc.script.controller.NodeScriptController.execute-script.title=Execute NodeScript
mvc.script.controller.NodeScriptController.execute-script-finished.instruction=Executing of NodeScript has finished.@@0#5
mvc.script.controller.NodeScriptController.execute-script-finished=The execution the of NodeScript has finished.
mvc.script.controller.NodeScriptController.execute-script-finished-with-errors.instruction=Executing of NodeScript has finished.
mvc.script.controller.NodeScriptController.execute-script-finished-with-errors=The execution the of NodeScript has finished with script errors.
mvc.script.controller.NodeScriptController.execute-script-finished-with-warnings.instruction=Executing of NodeScript has finished.
mvc.script.controller.NodeScriptController.execute-script-finished-with-warnings=The execution the of NodeScript has finished with script warnings.
mvc.script.controller.NodeScriptController.execute-script-aborted.instruction=Executing of NodeScript was aborted.
mvc.script.controller.NodeScriptController.execute-script-aborted=The execution the of NodeScript was aborted because of an error condition.
mvc.script.controller.NodeScriptController.substitue-variable-failed.instruction=Substitute variable failed!
mvc.script.controller.NodeScriptController.substitue-variable-failed.parse-error=Substitute variable failed because of a parse error!
mvc.script.controller.NodeScriptController.substitue-variable-failed=Substitute variable failed!

labels.WizardLabelFactory.choose-xml-location=Choose directory for BiDiB configuration files

mvc.logger.view.LogPanelView.title=RX/TX Logview
mvc.logger.view.LogsPane.autoScrolls=AutoScroll
mvc.logger.view.LogsPane.clear=Clear
mvc.logger.view.LogsPane.copyAllToClipboard=Copy all to clipboard

mvc.main.view.panel.renderer.BidibNodeNameUtils.node-error-reported=Node has reported an error: {0}

mvc.main.view.panel.nodetree.JideNodeTree.unsupported-protocol-version=The protocol version of this node is not supported!
mvc.main.view.panel.nodetree.JideNodeTree.columnChooserPopup.showProductName=Show product name

mvc.main.view.panel.nodetree.JideNodeTreeTableModel.column.name=Name
mvc.main.view.panel.nodetree.JideNodeTreeTableModel.column.uniqueId=UniqueId
mvc.main.view.panel.nodetree.JideNodeTreeTableModel.column.address=Address

mvc.main.view.panel.BidibNodeRenderer.rfbasis.tooltip.master=RF Base master
mvc.main.view.panel.BidibNodeRenderer.rfbasis.tooltip.slave=RF Base slave

# Wizard button labels
mvc.common.view.wizard.DefaultJWizardComponents.L_BackButton=< Back
mvc.common.view.wizard.DefaultJWizardComponents.L_BackButtonMnem=B
mvc.common.view.wizard.DefaultJWizardComponents.L_NextButton=Next >
mvc.common.view.wizard.DefaultJWizardComponents.L_NextButtonMnem=N
mvc.common.view.wizard.DefaultJWizardComponents.L_FinishButton=Finish
mvc.common.view.wizard.DefaultJWizardComponents.L_FinishButtonMnem=F
mvc.common.view.wizard.DefaultJWizardComponents.L_CancelButton=Cancel
mvc.common.view.wizard.DefaultJWizardComponents.L_CancelButtonMnem=C

# label keys
labels.Labels.labeldirerror.message=The directory for BiDiB configuration files is not available or is not write enabled.\nSave labels of nodes, ports, macro und accessories is not possible!\n\nCheck permission on path:\n{0}\n\nChoose OK to open the directory chooser or Canel to exit.
labels.Labels.labeldirerror.title=Directory permission
labels.Labels.labeldirerror.message_username_mismatch=The current username ''{0}'' does not match the configured username ''{1}''\r\nfor the directory for BiDiB configuration files:\r\n{2}\r\n\r\nCorrect the path and continue?
labels.Labels.labeldirerror.correct=Correct
labels.Labels.labeldirerror.ignore=Ignore
labels.Labels.labelfileerror.message=Save label to XML file failed because it is not available or is not write enabled!\r\nCheck permission on: {0}
labels.Labels.labelfileerror.title=File permission

migration.migrator.WizardMigrator.migrationFrame.title=Migration of Wizard labels
migration.migrator.WizardMigrator.migrationFrame.migrationInProgress=Migration of Wizard labels in progress ...
migration.migrator.WizardMigrator.migration_alternate_location.text=Your old labels are not stored at the default location.

New default location: {1}
Old location: {0}

To keep the old location for storage of migrated labels click Yes.
To use the new default location click No.
migration.migrator.WizardMigrator.migration_alternate_location.title=Migration of Wizard labels

# USB hotplug controller
mvc.main.controller.UsbHotPlugController.message.comport-selected=Selected COM port: {0}

# validation keys
not_empty=must not be empty
invalid_value=is not a valid value.
invalid_value_length=is not a valid length.
validation.cvvalue_key=CV value
validation.cvhighvalue_key=CV high value
validation.cvlowvalue_key=CV low value
validation.cvb0value_key=CV value
validation.cvb1value_key=CV value
validation.cvb2value_key=CV value
validation.cvb3value_key=CV value
validation.cvnumber_key=CV number
validation.address_key=Address
validation.address_short_key=Short address
validation.address_long_key=Long address
address_changed_automatically=was changed automatically. Please click the Acknowledge button
not_empty_for_write=must not be empty for write operation
not_empty_for_bit_verify=must not be empty for bit verify operation
validation.railcomplus_key=Railcom+
channel2_required=required activated channel 2
validation.switchtime_key=Switch Time
validation.current_address_key=Decoder Address
validation.sceneryname_key=Scenery name
validation.stepCount=Step count
validation.motorSize=Motor size
validation.gearRatio=Gear ratio
validation.gearRatioPrimary=Gear primary
validation.gearRatioSecondary=Gear secondary
validation.backLash=Backlash
validation.microStepping=Micro stepping
validation.speed=Speed
validation.accel=Accelaration
validation.decel=Decelaration

validation.reverserModeValue_key=Reverser Mode
validation.select_accessory=Select an accessory
validation.select_macro=Select a macro
validation.select_port=Select a port
validation.select_flag=Select a flag
validation.xmlFileName_key=CV definition -
validation.dccpacket_key=DCC packet address
validation.rcn_key=RCN address
validation.turnoutaddress_key=Turnout address
validation.startupAspect_key=Initial state

validation.scale_key=Scale
validation.cv36_key=CV36
validation.firmware_key=Firmware

validation.currentPosition_key=Current position
validation.oppositePosition_key=Opposite position
position_range_exceeded_half=must not be greater than half of total steps
position_range_exceeded=must not be greater than the number of total steps
opposite_position_greater_than_position=must be greater than position

load_control_not_active=Load control is not active

value_dirty=is dirty

filename_is_user_defined=User-defined file is used

comm.exception.InternalStartupException.status=Connect was aborted.\nReason: {0}
comm.exception.InternalStartupException.message=Connect was aborted.\nReason: {0}

org.bidib.jbidibc.core.exception.PortNotFoundException=Open port failed because port was not found:
org.bidib.jbidibc.core.exception.ReasonAware.causeTemplate=Open communication port failed: %s.\r\nReason: %s
org.bidib.jbidibc.core.exception.PortNotOpenedException.portInUse=Port is in use already.
org.bidib.jbidibc.core.exception.PortNotOpenedException.portNotFound=Port not found.
org.bidib.jbidibc.core.exception.PortNotOpenedException.unknown=unknown
org.bidib.jbidibc.core.exception.PortNotFoundException.portNotFound=Port was not found. Check if interface is connected.
org.bidib.jbidibc.core.exception.InvalidConfigurationException.causeTemplate=Invalid configuration detected: %s
org.bidib.jbidibc.core.exception.InvalidConfigurationException.debug-interface-active=An active debug interface configuration was detected.
org.bidib.jbidibc.core.exception.NoAnswerException=No answer from connected device:
org.bidib.jbidibc.core.exception.NoAnswerException.bidib-communication-failure=Communication with master was not established! Please check logfile.
org.bidib.jbidibc.core.exception.NoAnswerException.bidib-communication-failure-debug-interface-active=Communication with master was not established!\r\nSerial bootloader is active on GBMboost:\r\n{0}

org.bidib.jbidibc.core.enumeration.PomDecoder.loco=POM locomotive
org.bidib.jbidibc.core.enumeration.PomDecoder.accessory=POM Accessory
org.bidib.jbidibc.core.enumeration.PomDecoder.extAccessory=POM Extended Accessory
org.bidib.jbidibc.core.enumeration.PomDecoder.decoderId=POM via Decoder ID

org.bidib.jbidibc.core.enumeration.PomOperation.read-block=read block
org.bidib.jbidibc.core.enumeration.PomOperation.read-byte=read byte
org.bidib.jbidibc.core.enumeration.PomOperation.write-bit=write bit
org.bidib.jbidibc.core.enumeration.PomOperation.write-byte=write byte

org.bidib.jbidibc.core.enumeration.PomAddressing.pom=POM
org.bidib.jbidibc.core.enumeration.PomAddressing.xpom=XPOM (railcom)

org.bidib.jbidibc.core.enumeration.PtOperation.prog-break=break current action
org.bidib.jbidibc.core.enumeration.PtOperation.prog-query=query remaining time
org.bidib.jbidibc.core.enumeration.PtOperation.prog-read-byte=read byte
org.bidib.jbidibc.core.enumeration.PtOperation.prog-read-write-bit=read/write bit
org.bidib.jbidibc.core.enumeration.PtOperation.prog-write-byte=write byte

org.bidib.jbidibc.core.enumeration.AddressMode.short=short
org.bidib.jbidibc.core.enumeration.AddressMode.long=long

org.bidib.jbidibc.core.enumeration.AddressTypeEnum.loco-forward=Vehicle / Loco
org.bidib.jbidibc.core.enumeration.AddressTypeEnum.loco-backward=Vehicle / Loco
org.bidib.jbidibc.core.enumeration.AddressTypeEnum.accessory=Accessory
org.bidib.jbidibc.core.enumeration.AddressTypeEnum.extended-accessory=Ext. Accessory

org.bidib.jbidibc.core.enumeration.PomAddressTypeEnum.loco=Vehicle / Loco
org.bidib.jbidibc.core.enumeration.PomAddressTypeEnum.accessory=Accessory
org.bidib.jbidibc.core.enumeration.PomAddressTypeEnum.extended-accessory=Ext. Accessory

org.bidib.jbidibc.core.enumeration.CsQueryTypeEnum.locoList=Loco list
org.bidib.jbidibc.core.enumeration.CsQueryTypeEnum.accessoryList=Accessory list
org.bidib.jbidibc.core.enumeration.CsQueryTypeEnum.extAccessoryList=Ext Accessory list
org.bidib.jbidibc.core.enumeration.CsQueryTypeEnum.all=All

org.bidib.jbidibc.debug.LineEndingEnum.crlf=CR-LF
org.bidib.jbidibc.debug.LineEndingEnum.cr=CR
org.bidib.jbidibc.debug.LineEndingEnum.lf=LF

org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_NONE=No error on node
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_TXT=Error on node: {0}
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_CRC=CRC error on node
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_SIZE=Invalid size of message received on node
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_SEQUENCE=Sequence error detected
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_PARAMETER=Invalid parameter detected
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_BUS=Error on bus detected: {0}
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_ADDRSTACK=Overflow in hierarchy on address stack detected: {0}
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_IDDOUBLE=ID already registered in node table.
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_SUBCRC=CRC error on subnode: {0}
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_SUBTIME=Timeout while receiving message from subnode: {0}
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_SUBPAKET=Consistence error in message from subnode
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_OVERRUN=Messages lost due to overrun condition
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_HW=Hardware error detected: {0}
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_RESET_REQUIRED=A restart of the node is required

org.bidib.jbidibc.core.enumeration.LoadTypeEnum.switchOnly=Switch (w/o check)
org.bidib.jbidibc.core.enumeration.LoadTypeEnum.resistive=Resistive
org.bidib.jbidibc.core.enumeration.LoadTypeEnum.magCoilNoLimitStop=Mag. coil w/o limit stop
org.bidib.jbidibc.core.enumeration.LoadTypeEnum.magCoilWithLimitStop=Mag. coil with limit stop
org.bidib.jbidibc.core.enumeration.LoadTypeEnum.unknown=Unknown

org.bidib.jbidibc.core.enumeration.IoBehaviourInputEnum.active_low=Aktiv Low
org.bidib.jbidibc.core.enumeration.IoBehaviourInputEnum.active_high=Aktiv High
org.bidib.jbidibc.core.enumeration.IoBehaviourInputEnum.active_low_pullup=Aktiv Low Pullup
org.bidib.jbidibc.core.enumeration.IoBehaviourInputEnum.active_high_pulldown=Aktiv High Pulldown
org.bidib.jbidibc.core.enumeration.IoBehaviourInputEnum.unknown=Unknown