catalogs.BiDiBWizard_locale.properties Maven / Gradle / Ivy

Go to download
Show more of this group Show more artifacts with this name
Show all versions of bidibwizard Show documentation
jBiDiB BiDiB Wizard POM
There is a newer version: 2.0.0-M1
comm.AnalogPortStatus.start=Start
comm.BacklightPortStatus.start=Start
comm.BoosterStatus.go_req=Booster is turned off and it is requested to be turned on
comm.BoosterStatus.no_power=Booster is turned off (no power)
comm.BoosterStatus.on=Booster is turned on
comm.BoosterStatus.on_here=Booster is turned on (was turned on by a local key)
comm.BoosterStatus.on_hot=Booster is turned on and the temperature is critical
comm.BoosterStatus.on_limit=Booster is turned on and the current is limited
comm.BoosterStatus.on_stop_req=Booster is turned on and it is requested to be turned off
comm.BoosterStatus.off=Booster is turned off
comm.BoosterStatus.off_here=Booster is turned off (was turned off by a local key)
comm.BoosterStatus.off_hot=Booster is turned off (overheating)
comm.BoosterStatus.off_no_dcc=Booster is turned off (no DCC input)
comm.BoosterStatus.short=Booster is turned off (short circuit)
comm.CriticalFunctionStatus.begin=Start
comm.CriticalFunctionStatus.end=End
comm.FeedbackPortStatus.free=free
comm.FeedbackPortStatus.occupied=occupied
comm.FlagStatus.clear=Clear
comm.FlagStatus.query1=Query 1
comm.FlagStatus.query0=Query 0
comm.FlagStatus.set=Set
comm.InputStatus.query0=Value = 0
comm.InputStatus.query1=Value = 1
comm.LightPortStatus.on=Turn on
comm.LightPortStatus.off=Turn off
comm.LightPortStatus.up=Dim up
comm.LightPortStatus.down=Dim down
comm.LightPortStatus.neon=Neon flash
comm.LightPortStatus.blinka=Blink A
comm.LightPortStatus.blinkb=Blink B
comm.LightPortStatus.flasha=Flash A
comm.LightPortStatus.flashb=Flash B
comm.LightPortStatus.doubleflash=Double flash
comm.LightPortStatus.unknown=Unknown
comm.MacroStatus.start=Start
comm.MacroStatus.stop=Stop
comm.MacroStatus.end=End
comm.MotorPortStatus.forward=Forward
comm.MotorPortStatus.backward=Backward
comm.ServoPortStatus.start=Start
comm.SoundPortStatus.play=Play
comm.SoundPortStatus.pause=Pause
comm.SoundPortStatus.stop=Stop
comm.SwitchPortStatus.on=Turn on
comm.SwitchPortStatus.off=Turn off
comm.AccessoryOkayStatus.query0=Okay, if value = 0
comm.AccessoryOkayStatus.query1=Okay, if value = 1
comm.AccessoryOkayStatus.no_feedback=Okay (always)
comm.AccessoryAspectStatus.start=Start
comm.SpeedSteps.14=14
comm.SpeedSteps.28=28
comm.SpeedSteps.128=128

dialog.AboutDialog.authors=Authors
dialog.AboutDialog.build=Build
dialog.AboutDialog.date=Date
dialog.AboutDialog.java=Java version
dialog.AboutDialog.title=About
dialog.AboutDialog.version=Version
dialog.LabelDialog.label=Label
dialog.LabelDialog.title=Change label
dialog.NodeDetailsDialog.address=Address
dialog.NodeDetailsDialog.features=Features
dialog.NodeDetailsDialog.label=Label
dialog.NodeDetailsDialog.protocol=Protocol
dialog.NodeDetailsDialog.software=Software
dialog.NodeDetailsDialog.title=Node details
dialog.NodeDetailsDialog.uuid=UUID

mvc.main.view.component.NodeErrorsDialog.title=Errors during update node
mvc.main.view.component.NodeErrorsDialog.close=Close

mvc.cvprogrammer.view.CvProgrammerView.title=CV programmer
mvc.cvprogrammer.view.CvProgrammerView.action=Action
mvc.cvprogrammer.view.CvProgrammerView.address=Address
mvc.cvprogrammer.view.CvProgrammerView.addressType=Addressing
mvc.cvprogrammer.view.CvProgrammerView.close=Close
mvc.cvprogrammer.view.CvProgrammerView.operation=Operation
mvc.cvprogrammer.view.panel.CvWritePanel.title=CV value
mvc.cvprogrammer.view.panel.CvWritePanel.value=Value
mvc.cvprogrammer.view.panel.CvWritePanel.write=Write
mvc.cvprogrammer.view.panel.CvWritePanel.send=Send
mvc.cvprogrammer.view.panel.CvReadPanel.title=CV number
mvc.cvprogrammer.view.panel.CvReadPanel.name=CV

mvc.pt.view.PtConfirmDialog.title=CV programmer for programming track
mvc.pt.view.PtConfirmDialog.message-warn=Attention: You're changing into Programming Mode!
mvc.pt.view.PtConfirmDialog.message=This mode operates on every connected decoder (devices, loco and function decoder). Please make sure that only the DCC decoder to be programmed is connected with the system.
mvc.pt.view.PtConfirmDialog.do-not-ask=Do not ask in future
mvc.pt.view.PtConfirmDialog.continue=Continue
mvc.pt.view.PtConfirmDialog.cancel=Cancel

mvc.pt.view.PtProgrammerView.title=CV programmer for programming track
mvc.pt.view.PtProgrammerView.close=Close
mvc.pt.view.PtProgrammerView.switch-to-prog-mode-failed.title=Programming Track
mvc.pt.view.PtProgrammerView.switch-to-prog-mode-failed.message=Switch CommandStation to ProgrammMode failed.
mvc.pt.view.PtProgrammerView.tab-direct-access=Direct
mvc.pt.view.PtProgrammerView.tab-direct-access.tooltip=Direct CV access.
mvc.pt.view.PtProgrammerView.tab-address=Address
mvc.pt.view.PtProgrammerView.tab-address.tooltip=Address programming support.
mvc.pt.view.PtProgrammerView.tab-railcom=Railcom
mvc.pt.view.PtProgrammerView.tab-railcom.tooltip=Railcom channel configuration support.
mvc.pt.view.panel.DirectAccessPanel.direct-message=Read and write CV values for DCC-decoder.
mvc.pt.view.panel.DirectAccessPanel.mode=Mode
mvc.pt.view.panel.DirectAccessPanel.cv-number=CV number
mvc.pt.view.panel.DirectAccessPanel.cv-value=CV value
mvc.pt.view.panel.DirectAccessPanel.verify=Verify
mvc.pt.view.panel.CvWritePanel.title=CV value
mvc.pt.view.panel.CvWritePanel.value=Value
mvc.pt.view.panel.CvWritePanel.send=Send
mvc.pt.view.panel.AddressPanel.address-message=Read and write the loco address with support for short and long addresses.
mvc.pt.view.panel.AddressPanel.address-mode=Address mode
mvc.pt.view.panel.AddressPanel.address=Address
mvc.pt.view.panel.AbstractPtPanel.read=Read
mvc.pt.view.panel.AbstractPtPanel.write=Write
mvc.pt.view.panel.AbstractPtPanel.prog-result=Prog Result
mvc.pt.view.panel.RailcomPanel.railcom-message=Read and write the channel configuration for Railcom.
mvc.pt.view.panel.RailcomPanel.railcom-activate-info=Activate CV29 Bit 3 to receive address messages from decoder.
mvc.pt.view.panel.RailcomPanel.channel1=RailCom Channel 1 Address Broadcast (CV28.0)
mvc.pt.view.panel.RailcomPanel.channel2=RailCom Channel 2 Data Transmission (CV28.1)
mvc.pt.view.panel.RailcomPanel.railcomplus=RailCom+ (CV28.7)
mvc.pt.view.panel.RailcomPanel.channelUsage=RailCom Dynamic Channel Usage (CV28.2)
mvc.pt.view.panel.RailcomPanel.channelUsage.tooltip=The Decoder sends data in Channel 1 and Channel 2. However the transmission in Channel 1 
will be self-terminated after succeeded receipt of the own loco address. 
This allows the detection of a new rerailed Loco by a Railcom system over Channel 1.
mvc.pt.model.PtMode.byte=Byte
mvc.pt.model.PtMode.bit=Bit

mvc.pom.view.PomConfirmDialog.title=CV programmer for programming on main (POM)
mvc.pom.view.PomConfirmDialog.message-warn=Attention: The Command Station or Boosters are switched off!
mvc.pom.view.PomConfirmDialog.message=For programming of decoders the Central Station and all Boosters must be switched on.
Continue to switch on?
mvc.pom.view.PomConfirmDialog.do-not-ask=Do not ask in future
mvc.pom.view.PomConfirmDialog.continue=Continue
mvc.pom.view.PomConfirmDialog.cancel=Cancel

mvc.pom.view.PomProgrammerView.title=CV programmer for POM
mvc.pom.view.PomProgrammerView.close=Close
mvc.pom.view.PomProgrammerView.clearLogArea=Clear
mvc.pom.view.PomProgrammerView.current-address=Loco address
mvc.pom.view.PomProgrammerView.ackn-address-changed=Acknowlegde
mvc.pom.view.PomProgrammerView.tab-direct-access=Direct
mvc.pom.view.PomProgrammerView.tab-direct-access.tooltip=Direct CV access.
mvc.pom.view.PomProgrammerView.tab-address=Address
mvc.pom.view.PomProgrammerView.tab-address.tooltip=Address programming support.
mvc.pom.view.PomProgrammerView.tab-railcom=Railcom
mvc.pom.view.PomProgrammerView.tab-railcom.tooltip=Railcom channel configuration support.
mvc.pom.view.PomProgrammerView.switch-to-running-mode-failed.title=Command Station
mvc.pom.view.PomProgrammerView.switch-to-running-mode-failed.message=Switch command station to running mode failed.
POM programming is not possible.

mvc.pom.view.panel.AddressPanel.address-message=Write the loco address with support for short and long addresses.
mvc.pom.view.panel.AddressPanel.address-mode=Address mode
mvc.pom.view.panel.AddressPanel.address=Address
mvc.pom.view.panel.AbstractPomPanel.read=Read
mvc.pom.view.panel.AbstractPomPanel.write=Write
mvc.pom.view.panel.AbstractPomPanel.prog-result=Prog Result
mvc.pom.view.panel.DirectAccessPanel.direct-message=Read and write CV values for DCC-decoder.
mvc.pom.view.panel.DirectAccessPanel.mode=Mode
mvc.pom.view.panel.DirectAccessPanel.cv-number=CV number
mvc.pom.view.panel.DirectAccessPanel.cv-value=CV value
mvc.pom.view.panel.DirectAccessPanel.verify=Verify
mvc.pom.view.panel.RailcomPanel.railcom-message=Read and write the channel configuration for Railcom.
mvc.pom.view.panel.RailcomPanel.railcom-activate-info=Activate CV29 Bit 3 to receive address messages from decoder.
mvc.pom.view.panel.RailcomPanel.channel1=RailCom Channel 1 Address Broadcast (CV28.0)
mvc.pom.view.panel.RailcomPanel.channel2=RailCom Channel 2 Data Transmission (CV28.1)
mvc.pom.view.panel.RailcomPanel.railcomplus=RailCom+ (CV28.7)
mvc.pom.view.panel.RailcomPanel.channelUsage=RailCom Dynamic Channel Usage (CV28.2)
mvc.pom.view.panel.RailcomPanel.channelUsage.tooltip=The Decoder sends data in Channel 1 and Channel 2. However the transmission in Channel 1 
will be self-terminated after succeeded receipt of the own loco address. 
This allows the detection of a new rerailed Loco by a Railcom system over Channel 1.
mvc.pom.model.PomMode.byte=Byte
mvc.pom.model.PomMode.bit=Bit

mvc.features.view.FeaturesView.title=Features
mvc.features.view.FeaturesView.save=Save
mvc.features.view.FeaturesView.cancel=Cancel
mvc.features.view.panel.FeaturesPanel.feature=Feature
mvc.features.view.panel.FeaturesPanel.value=Value

mvc.error.view.ErrorView.title=Error
mvc.error.view.ErrorView.details=Details

mvc.firmware.view.FirmwareView.title=Update firmware
mvc.firmware.view.FirmwareView.close=Close

mvc.firmware.controller.FirmwareController.status.load-firmware-passed=Load firmware ({}) from file into buffer passed.
mvc.firmware.controller.FirmwareController.status.load-firmware-failed=Load firmware ({}) from file into buffer failed.
mvc.firmware.controller.FirmwareController.status.start-transfer=Start transfer of '{}'.
mvc.firmware.controller.FirmwareController.status.unexpected-answer=Unexpected answer from node while sending FW data.
mvc.firmware.controller.FirmwareController.status.transfer-aborted=FW update process was aborted during transfer of {}.
mvc.firmware.controller.FirmwareController.status.transfer-finished=Finished transfer of '{}'.
mvc.firmware.controller.FirmwareController.status.enter-firmware-update-mode-failed=Enter firmware update operation failed.
mvc.firmware.controller.FirmwareController.status.transfer-firmware-failed=Transfer firmware update to node failed.
mvc.firmware.controller.FirmwareController.status.transfer-firmware-timeout=Timeout during firmware update operation: {}. \r\nAborted firmware update, try start again.
mvc.firmware.controller.FirmwareController.status.node-lost=The node to update was lost! Abort operation.

mvc.firmware.view.panel.FirmwareUpdatePanel.status.file-selected=Selected firmware file: {}
mvc.firmware.view.panel.FirmwareUpdatePanel.status.selected-dest=Selected destination: {}, firmware: {}
mvc.firmware.view.panel.FirmwareUpdatePanel.file=File
mvc.firmware.view.panel.FirmwareUpdatePanel.firmware=Firmware
mvc.firmware.view.panel.FirmwareUpdatePanel.name=Name
mvc.firmware.view.panel.FirmwareUpdatePanel.uuid=UUID

mvc.firmware.view.panel.FirmwareUpdatePanel.node-info=Node information
mvc.firmware.view.panel.FirmwareUpdatePanel.firmware-update=Firmware update
mvc.firmware.view.panel.FirmwareUpdatePanel.select-firmware=Select
mvc.firmware.view.panel.FirmwareUpdatePanel.progress=Update progress
mvc.firmware.view.panel.FirmwareUpdatePanel.startUpdate=Start
mvc.firmware.view.panel.FirmwareUpdatePanel.close=Close
mvc.firmware.view.panel.FirmwareUpdatePanel.clearLogArea=Clear
mvc.firmware.view.panel.FirmwareUpdatePanel.filter=Firmware files
mvc.firmware.view.panel.FirmwareUpdatePanel.memoryType=Memory type
mvc.firmware.view.panel.FirmwareUpdatePanel.memoryType-0=Flash
mvc.firmware.view.panel.FirmwareUpdatePanel.memoryType-1=Eeprom
mvc.firmware.view.panel.FirmwareUpdatePanel.memoryType-other=Other
mvc.firmware.view.panel.FirmwareUpdatePanel.expert-mode=Expert mode
mvc.firmware.model.UpdateStatus.none=
mvc.firmware.model.UpdateStatus.prepare=Prepare
mvc.firmware.model.UpdateStatus.entry-passed=In FW-update-mode
mvc.firmware.model.UpdateStatus.data-transfer=Data-transfer
mvc.firmware.model.UpdateStatus.data-transfer-passed=Data-transfer passed
mvc.firmware.model.UpdateStatus.exit-passed=FW-update-mode finished
mvc.firmware.model.UpdateStatus.prepare-failed=Prepare failed
mvc.firmware.model.UpdateStatus.data-transfer-failed=Data-transfer failed
mvc.firmware.model.UpdateStatus.node-lost=Node lost!

mvc.loco.view.LocoView.additionalFunctions=Additional functions
mvc.loco.view.LocoView.address=Address
mvc.loco.view.LocoView.backwards=backwards
mvc.loco.view.LocoView.binaryState=Binary state
mvc.loco.view.LocoView.emergencyStop=EMRG stop
mvc.loco.view.LocoView.forwards=forwards
mvc.loco.view.LocoView.light=Light
mvc.loco.view.LocoView.loco=Loco
mvc.loco.view.LocoView.reportedSpeed=Reported speed
mvc.loco.view.LocoView.speed=Speed
mvc.loco.view.LocoView.speedSteps=Speed steps
mvc.loco.view.LocoView.stop=Stop
mvc.loco.view.LocoView.stopLoco=Stop loco
mvc.loco.view.LocoView.title=Loco controller
mvc.loco.view.LocoView.writeBinaryState=OK
mvc.loco.view.LocoView.script=Script
mvc.loco.view.ScriptPanel.selectScript=Select
mvc.loco.view.ScriptPanel.startScript=Start
mvc.loco.view.ScriptPanel.stopScript=Stop
mvc.loco.view.ScriptPanel.scriptDescription=OpenDCC Scriptfiles
mvc.loco.view.ScriptPanel.repeating=Repeating

mvc.accessory.view.AccessoryView.title=DCC Accessory controller
mvc.accessory.view.AccessoryView.close=Close
mvc.accessory.view.AccessoryView.clearLogArea=Clear
mvc.accessory.view.AccessoryView.tab-normal=Normaler Accessory Decoder
mvc.accessory.view.AccessoryView.tab-normal.tooltip=Normaler DCC Accessory Decoder
mvc.accessory.view.AccessoryView.tab-extended=Extended Accessory Decoder
mvc.accessory.view.AccessoryView.tab-extended.tooltip=Extended DCC Accessory Decoder
mvc.accessory.view.panel.AbstractAccessoryPanel.dcc-address=DCC address
mvc.accessory.view.panel.AbstractAccessoryPanel.switchTime=Switch time
mvc.accessory.view.panel.AbstractAccessoryPanel.timeBaseUnit=Time unit
mvc.accessory.view.panel.AbstractAccessoryPanel.timingControl=Timing control
mvc.accessory.view.panel.DccAccessoryPanel.aspect-0=red
mvc.accessory.view.panel.DccAccessoryPanel.aspect-1=green

org.bidib.jbidibc.core.enumeration.TimeBaseUnitEnum.unit-100ms=100ms
org.bidib.jbidibc.core.enumeration.TimeBaseUnitEnum.unit-1s=1s

org.bidib.jbidibc.core.enumeration.TimingControlEnum.coil-on-off=conventional (coil-on/coil-off)
org.bidib.jbidibc.core.enumeration.TimingControlEnum.output-unit=output unit

mvc.main.controller.DefaultMainMenuListener.open-port=Open connection ...
mvc.main.controller.DefaultMainMenuListener.save-under=Save under ...
mvc.main.controller.DefaultMainMenuListener.copy-logfiles-failed=Copy logfiles failed.\r\nReason: {0}
mvc.main.controller.DefaultMainMenuListener.title-error=Copy logfiles

mvc.main.controller.MainController.nodeDescription=Node files
mvc.main.controller.MainController.connectHint=Connect to system with File > Connect from menu.
mvc.main.controller.MainController.load-config=Loading configuration of node: %s
mvc.main.controller.MainController.load-config-finished=Finished loading configuration of node: %s (Load duration: %s)

mvc.main.controller.MainController.new-node-added=Added new node: %s
mvc.main.controller.MainController.new-node-with-error=Error during processing of new node: %s
mvc.main.controller.MainController.node-lost=Node lost: %s
mvc.main.controller.MainController.missing-port-config=The node did not deliver the configuration for all ports!

mvc.main.controller.MainController.checkLoadMacroContent=Load macro content from node before export
mvc.main.controller.MainController.checkLoadFeatures=Load features from node before export
mvc.main.controller.MainController.checkLoadCVs=Load CVs from node before export
mvc.main.controller.MainController.checkRestoreMacroContent=Import macro content and accessories?
mvc.main.controller.MainController.checkRestoreFeatures=Import feature configuration?
mvc.main.controller.MainController.checkRestoreCVs=Import CV configuration?
mvc.main.controller.MainController.exportedNodeState=Exported node state to file: %s
mvc.main.controller.MainController.importedNodeState=Imported node state file: %s
mvc.main.controller.MainController.exportedMacro=Exported macro to file: %s
mvc.main.controller.MainController.exportedAccessory=Exported accessory to file: %s
mvc.main.controller.MainController.loadCvFinished=Load CV values has finished! Total loading duration: %s
mvc.main.controller.MainController.writeCvFinished=Write CV values has finished! Total writing duration: %s
mvc.main.controller.MainController.save-values-on-node-failed=Save values on node failed!
mvc.main.controller.MainController.error.title=BiDiB-Wizard
mvc.main.controller.MainController.pending_changes=Pending changes
mvc.main.controller.MainController.macro_has_pending_changes=The current macro has pending changes!\r\nContinue and discard changes?
mvc.main.controller.MainController.accessory_has_pending_changes=The current accessory has pending changes!\r\nContinue and discard changes?
mvc.main.controller.MainController.ask_export_empty_macro=The current macro has no steps!\r\nContinue?
mvc.main.controller.MainController.export_macro.title=Export macro

mvc.main.view.component.SaveNodeConfigurationDialog.ok=Ok
mvc.main.view.component.SaveNodeConfigurationDialog.cancel=Cancel
mvc.main.view.component.SaveNodeConfigurationDialog.title=Transfer node configuration
mvc.main.view.component.SaveNodeConfigurationDialog.description=Select the configuration items that will be transfered and saved non the node.
mvc.main.view.component.SaveNodeConfigurationDialog.transfer-description=Start transfer of selected configuration to node? 
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveMacroLabels=Macro names
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveMacros=All macros
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveAccessories=All accessories
mvc.main.view.component.SaveNodeConfigurationDialog.checkSavePortLabels=Port names
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveLightportConfiguration=Lightport configuration
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveBacklightportConfiguration=Backlightport configuration
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveServoportConfiguration=Servoport configuration
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveSwitchportConfiguration=Switchport configuration
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveFeatures=All features
mvc.main.view.component.SaveNodeConfigurationDialog.checkSaveConfigurationVariables=All CVs

dialog.FileDialog.save=Save file
dialog.FileDialog.open=Open file
dialog.FileDialog.save_file=Save file
dialog.FileDialog.override_existing_file=A file with the name ''{0}'' exists already.\nOverride content of existing file?

mvc.main.view.component.AccessoryFileDialog.checkUseLegacyFormat=Use legacy export format
mvc.main.view.component.AccessoryFileDialog.accessoryDescriptionLegacy=Accessory files (legacy)
mvc.main.view.component.AccessoryFileDialog.accessoryDescription=Accessory files

mvc.main.view.component.MacroFileDialog.checkUseLegacyFormat=Use legacy export format
mvc.main.view.component.MacroFileDialog.macroDescriptionLegacy=Macro files (legacy)
mvc.main.view.component.MacroFileDialog.macroDescription=Macro files

mvc.main.model.Accessory.label=Accessory
mvc.main.model.AccessoryTableModel.aspect=Aspect
mvc.main.model.AccessoryTableModel.macro=Macro
mvc.main.model.AccessoryTableModel.test=Test
mvc.main.model.AnalogPort.label=Analog
mvc.main.model.FeedbackPort.label=Feedback
mvc.main.model.Flag.label=Flag
mvc.main.model.InputPort.label=Input
mvc.main.model.InputPortTableModel.label=Input
mvc.main.model.InputPortTableModel.ioBehaviour=I/O Behaviour
mvc.main.model.InputPortTableModel.switchOffTime=SwitchOff Time
mvc.main.model.InputPortTableModel.portIdentifier=Port
mvc.main.model.InputPortTableModel.status=Status
mvc.main.model.LightPort.label=Light
mvc.main.model.LightPortTableModel.label=Output
mvc.main.model.LightPortTableModel.pwmMin=Brightness off
mvc.main.model.LightPortTableModel.pwmMax=Brightness on
mvc.main.model.LightPortTableModel.dimMin=Fade in
mvc.main.model.LightPortTableModel.dimMax=Fade out
mvc.main.model.LightPortTableModel.rgb=RGB
mvc.main.model.LightPortTableModel.status=Status
mvc.main.model.LightPortTableModel.test=Test
mvc.main.model.BacklightPort.label=Backlight
mvc.main.model.BacklightPortTableModel.label=Output
mvc.main.model.BacklightPortTableModel.dimSlopeDown=Fade in
mvc.main.model.BacklightPortTableModel.dimSlopeUp=Fade out
mvc.main.model.BacklightPortTableModel.dmxMapping=DMX address
mvc.main.model.BacklightPortTableModel.test=Test target value
mvc.main.model.Macro.label=Macro
mvc.main.model.MacroRepeatDay.everyDay=Every day
mvc.main.model.MacroRepeatTime.none=No repetition
mvc.main.model.MacroRepeatTime.minutely=Every minute
mvc.main.model.MacroRepeatTime.quarter_hourly=Every 15 minutes
mvc.main.model.MacroRepeatTime.half_hourly=Every 30 minutes
mvc.main.model.MacroRepeatTime.hourly=Every hour
mvc.main.model.MacroRepeatTime.working_hourly=Every working hour (08:00-17:00)
mvc.main.model.MacroTableModel.step=Step
mvc.main.model.MacroTableModel.delay=Delay
mvc.main.model.MacroTableModel.portType=Port Type
mvc.main.model.MacroTableModel.action=Action
mvc.main.model.MacroTableModel.portNumber=Port
mvc.main.model.MacroTableModel.extra=Extra

mvc.main.model.MotorPort.label=Motor
mvc.main.model.ServoPort.label=Servo
mvc.main.model.ServoPortTableModel.label=Output
mvc.main.model.ServoPortTableModel.speed=Speed
mvc.main.model.ServoPortTableModel.value=Destination value in %
mvc.main.model.ServoPortTableModel.trimUp=Trim value top
mvc.main.model.ServoPortTableModel.trimDown=Trim value bottom
mvc.main.model.SimplePortTableModel.label=Output
mvc.main.model.SimplePortTableModel.test=Test
mvc.main.model.SoundPort.label=Sound
mvc.main.model.SwitchPort.label=Output
mvc.main.model.SwitchPortTableModel.label=Output
mvc.main.model.SwitchPortTableModel.portIdentifier=Port
mvc.main.model.SwitchPortTableModel.test=Test
mvc.main.model.SwitchPortTableModel.ioBehaviour=I/O Behaviour
mvc.main.model.SwitchPortTableModel.switchOffTime=SwitchOff Time

mvc.main.model.function.AccessoryOkayFunction.title=Accessory notify
mvc.main.model.function.AnalogPortAction.title=Analog port
mvc.main.model.function.BacklightPortAction.title=Backlight port
mvc.main.model.function.CriticalFunction.title=Crit. section
mvc.main.model.function.DelayFunction.title=Delay
mvc.main.model.function.FlagFunction.title=Flag
mvc.main.model.function.InputFunction.title=Input port
mvc.main.model.function.LightPortAction.title=Light port
mvc.main.model.function.MacroFunction.title=Macro
mvc.main.model.function.MotorPortAction.title=Motor port
mvc.main.model.function.RandomDelayFunction.title=Random delay
mvc.main.model.function.ServoPortAction.title=Servo port
mvc.main.model.function.SoundPortAction.title=Sound port
mvc.main.model.function.SwitchPortAction.title=Switch port
mvc.main.model.function.ServoMoveQueryFunction.title=Await servo move
mvc.main.model.function.EmptyFunction.title=

mvc.main.view.MainView.title=BiDiB-Wizard

mvc.main.view.MainView.toolbar.bidib.connect.alttext=Connect
mvc.main.view.MainView.toolbar.bidib.connect=Connect to BiDiB
mvc.main.view.MainView.toolbar.bidib.disconnect.alttext=Disconnect
mvc.main.view.MainView.toolbar.bidib.disconnect=Disconnect from BiDiB
mvc.main.view.MainView.toolbar.bidib.all-booster-off.alttext=All booster off
mvc.main.view.MainView.toolbar.bidib.all-booster-off=Switch all booster off

mvc.main.view.MainView.toolbar.simulation.open=Open Simulation
mvc.main.view.MainView.toolbar.simulation.open.alttext=Open

mvc.main.view.component.LabelList.chooseLabel=Please choose a name.

mvc.main.view.menu.AccessoryListMenu.editLabel=Change label
mvc.main.view.menu.AccessoryListMenu.export=Export
mvc.main.view.menu.AccessoryListMenu.import=Import
mvc.main.view.menu.AccessoryTableMenu.delete=Delete
mvc.main.view.menu.AccessoryTableMenu.insertEmptyAfter=Insert empty aspect after
mvc.main.view.menu.AccessoryTableMenu.insertEmptyBefore=Insert empty aspect before
mvc.main.view.menu.AccessoryTableMenu.selectAll=Select all
mvc.main.view.menu.MacroListMenu.editLabel=Change label
mvc.main.view.menu.MacroListMenu.export=Export
mvc.main.view.menu.MacroListMenu.import=Import
mvc.main.view.menu.MacroListMenu.start=Test
mvc.main.view.menu.MacroListMenu.start.tooltip=Transfer the macro to the node and start it.
mvc.main.view.menu.MacroListMenu.stop=Stop
mvc.main.view.menu.MacroListMenu.stop.tooltip=Stop the macro on the node.
mvc.main.view.menu.MacroListMenu.initialize=Initialize
mvc.main.view.menu.MacroListMenu.initialize.tooltip=Remove all steps and initialize the macro with default values.
mvc.main.view.menu.MacroTableMenu.copy=Copy
mvc.main.view.menu.MacroTableMenu.cut=Cut
mvc.main.view.menu.MacroTableMenu.delete=Delete
mvc.main.view.menu.MacroTableMenu.insertEmptyAfter=Insert empty step after
mvc.main.view.menu.MacroTableMenu.insertEmptyBefore=Insert empty step before
mvc.main.view.menu.MacroTableMenu.pasteAfter=Paste after
mvc.main.view.menu.MacroTableMenu.pasteBefore=Paste before
mvc.main.view.menu.MacroTableMenu.pasteInvertedAfter=Paste inverted after
mvc.main.view.menu.MacroTableMenu.selectAll=Select all
mvc.main.view.menu.MainMenuBar.about=About
mvc.main.view.menu.MainMenuBar.edit=Edit
mvc.main.view.menu.MainMenuBar.extras=Extras
mvc.main.view.menu.MainMenuBar.file=File
mvc.main.view.menu.MainMenuBar.help=Help
mvc.main.view.menu.MainMenuBar.node=Node
mvc.main.view.menu.MainMenuBar.preferences=Preferences
mvc.main.view.menu.MainMenuBar.tools=Tools
mvc.main.view.menu.MainMenuBar.nodeScript=NodeScript Editor
mvc.main.view.menu.MainMenuBar.railcomPlus=RailcomPlus
mvc.main.view.menu.MainMenuBar.pomUpdate=POM Decoder Update
mvc.main.view.menu.MainMenuBar.developerTools=Developer Tools
mvc.main.view.menu.MainMenuBar.debugInterface=Debug Interface
mvc.main.view.menu.MainMenuBar.window=Window
mvc.main.view.menu.MainMenuBar.boosterTable=Booster table
mvc.main.view.menu.MainMenuBar.pingTable=Ping table
mvc.main.view.menu.MainMenuBar.console=Console
mvc.main.view.menu.MainMenuBar.quit=Quit
mvc.main.view.menu.MainMenuBar.connect=Connect
mvc.main.view.menu.MainMenuBar.disconnect=Disconnect
mvc.main.view.menu.MainMenuBar.logFiles=Collect logfiles
mvc.main.view.menu.MainMenuBar.logPanel=Open RX/TX Logview
mvc.main.view.menu.NodeListMenu.addressMessages=Receive address notifications
mvc.main.view.menu.NodeListMenu.cvProgrammer=CV programmer
mvc.main.view.menu.NodeListMenu.features=Features
mvc.main.view.menu.NodeListMenu.reset=Restart
mvc.main.view.menu.NodeListMenu.ping=Ping
mvc.main.view.menu.NodeListMenu.dccStart=Start macros from DCC
mvc.main.view.menu.NodeListMenu.details=Details
mvc.main.view.menu.NodeListMenu.editLabel=Change label
mvc.main.view.menu.NodeListMenu.export=Export
mvc.main.view.menu.NodeListMenu.export.tooltip=Export the configurable values (accessories, macros, servo and light port configuration) to a file
mvc.main.view.menu.NodeListMenu.externalStart=Start macros from external input port
mvc.main.view.menu.NodeListMenu.feedbackMessages=Receive feedback notifications
mvc.main.view.menu.NodeListMenu.firmwareUpdate=Update firmware
mvc.main.view.menu.NodeListMenu.identify=Identify
mvc.main.view.menu.NodeListMenu.import=Import
mvc.main.view.menu.NodeListMenu.keyMessages=Receive key notifications
mvc.main.view.menu.NodeListMenu.loco=Loco controller
mvc.main.view.menu.NodeListMenu.dccAccessory=DCC accessory controller
mvc.main.view.menu.NodeListMenu.locoCv=CV programmer for loco decoder (POM)
mvc.main.view.menu.NodeListMenu.locoCvPt=CV programmer for loco decoder (PT)
mvc.main.view.menu.NodeListMenu.save=Save
mvc.main.view.menu.NodeListMenu.saveNode=Save
mvc.main.view.menu.NodeListMenu.saveNode.tooltip=Save configurable values (accessories, macros, servo and light port configuration) to the node
mvc.main.view.menu.NodeListMenu.bulkSwitch=Bulk Switch operations
mvc.main.view.menu.NodeListMenu.bulkSwitch.tooltip=Perform some switch operations on a node for testing purposes
mvc.main.view.menu.NodeListMenu.dmxModeler=DMX Modeler
mvc.main.view.menu.NodeListMenu.clearError=Acknowledge node error
mvc.main.view.menu.NodeListMenu.clearError.tooltip=Clear the error marker icon

mvc.main.view.menu.PortListMenu.editLabel=Change label
mvc.main.view.menu.PortListMenu.mapPort=Map port

mvc.main.view.panel.AccessoryPanel.emptyTable=Click right mouse button to create an aspect.
mvc.main.view.panel.AccessoryPanel.initialState=Initial state
mvc.main.view.panel.AccessoryListPanel.name=Accessories
mvc.main.view.panel.AccessoryListPanel.reload=Reload
mvc.main.view.panel.AccessoryListPanel.save=Save
mvc.main.view.panel.AnalogPortListPanel.name=Analog ports
mvc.main.view.panel.AnalogPortListPanel.emptyTable=There are no analog ports for this node.
mvc.main.model.AccessoryStartupAspectModel.aspectParam-unchanged=Unchanged
mvc.main.model.AccessoryStartupAspectModel.aspectParam-restore=Restore

mvc.main.view.panel.BoosterPanel.current=Current
mvc.main.view.panel.BoosterPanel.diagnostic=Diagnostic
mvc.main.view.panel.BoosterPanel.name=Booster
mvc.main.view.panel.BoosterPanel.off=OFF
mvc.main.view.panel.BoosterPanel.on=ON
mvc.main.view.panel.BoosterPanel.status=Status
mvc.main.view.panel.BoosterPanel.temperature=Temperature
mvc.main.view.panel.BoosterPanel.voltage=Voltage
mvc.main.view.panel.FeedbackPortListPanel.name=Feedback ports
mvc.main.view.panel.FeedbackPortListPanel.emptyTable=There are no feedback ports for this node.
mvc.main.view.panel.InputPortListPanel.name=Input ports
mvc.main.view.panel.InputPortListPanel.emptyTable=There are no input ports for this node.
mvc.main.view.panel.InputPortListPanel.switch-port-title=Switch port type
mvc.main.view.panel.InputPortListPanel.switch-port-confirm=Switch port to input port?
mvc.main.view.panel.LedPanel.title=Serial port
mvc.main.view.panel.LightPortListPanel.name=Light ports
mvc.main.view.panel.LightPortListPanel.emptyTable=There are no light ports for this node.

mvc.main.view.panel.renderer.LightPortStatusLabel.on=on
mvc.main.view.panel.renderer.LightPortStatusLabel.off=off
mvc.main.view.panel.renderer.LightPortStatusLabel.up=dim up
mvc.main.view.panel.renderer.LightPortStatusLabel.down=dim down
mvc.main.view.panel.renderer.LightPortStatusLabel.neon=neon flash
mvc.main.view.panel.renderer.LightPortStatusLabel.blinka=blink A
mvc.main.view.panel.renderer.LightPortStatusLabel.blinkb=blink B
mvc.main.view.panel.renderer.LightPortStatusLabel.flasha=flash A
mvc.main.view.panel.renderer.LightPortStatusLabel.flashb=flash B
mvc.main.view.panel.renderer.LightPortStatusLabel.doubleflash=double flash
mvc.main.view.panel.renderer.LightPortStatusLabel.unknown=Unknown

mvc.main.view.panel.BacklightPortListPanel.name=Backlight ports
mvc.main.view.panel.BacklightPortListPanel.emptyTable=There are no backlight ports for this node.
mvc.main.view.panel.MacroContentPanel.brightness=Brightness
mvc.main.view.panel.MacroContentPanel.destination=Dest. value
mvc.main.view.panel.MacroContentPanel.emptyTable=Click right mouse button to create a macro step.
mvc.main.view.panel.MacroContentPanel.delay=Delay
mvc.main.view.panel.MacroContentPanel.maximum=Upper bound
mvc.main.view.panel.MacroContentPanel.restore-macro-failed=The selected macro could not be restored because an error occured during reading.
mvc.main.view.panel.MacroListPanel.name=Macros
mvc.main.view.panel.MacroListPanel.reload=Reload
mvc.main.view.panel.MacroListPanel.reload.tooltip=Reload macro from node
mvc.main.view.panel.MacroListPanel.load=Read
mvc.main.view.panel.MacroListPanel.load.tooltip=Read macro from node. Pending changes are discarded!
mvc.main.view.panel.MacroListPanel.start=Test
mvc.main.view.panel.MacroListPanel.test=Test
mvc.main.view.panel.MacroListPanel.test.tooltip=Start macro for testing purposes
mvc.main.view.panel.MacroListPanel.testPower=Test
mvc.main.view.panel.MacroListPanel.testPower.tooltip=Transfer current macro to node and start macro for testing purposes
mvc.main.view.panel.MacroListPanel.stop=Stop
mvc.main.view.panel.MacroListPanel.stop.tooltip=Stop macro on the node
mvc.main.view.panel.MacroListPanel.save=Write
mvc.main.view.panel.MacroListPanel.save.tooltip=Transfer and save macro on the node
mvc.main.view.panel.MacroListPanel.transfer=Transfer
mvc.main.view.panel.MacroListPanel.transfer.tooltip=Transfer macro to node
mvc.main.view.panel.MacroListPanel.remoteStart=Start remotely
mvc.main.view.panel.MacroListPanel.remoteStart.tooltip=Start transfered macro on the node (do not transfer changes before start)
mvc.main.view.panel.MacroListPanel.macro_content_not_valid=The macro steps are not valid!\r\nPlease remove empty macro steps.
mvc.main.view.panel.MacroListPanel.macro_transfer_pending_changes_before_test=Transfer pending macro changes to node before test?
mvc.main.view.panel.MacroParameterPanel.delay=Slowdown factor
mvc.main.view.panel.MacroParameterPanel.cycles=Cycles
mvc.main.view.panel.MacroParameterPanel.condition=Start condition
mvc.main.view.panel.MacroParameterPanel.repetition=Repetition
mvc.main.view.panel.MacroParameterPanel.time=Time

mvc.main.model.Macro.pending-changes=Macro has pending changes. Press Write to store the macro permanently.
mvc.main.model.Macro.saved-on-node=Macro is saved on node. Press Write to store the macro permanently.
mvc.main.model.Macro.permanently-stored-on-node=Macro is permanently stored on node.

mvc.main.view.panel.listener.AccessoryTableListener.accessory_transfer_pending_changes_before_test=Transfer pending accessory changes to node before test?
mvc.main.view.panel.listener.AccessoryTableListener.test=Test accessory

mvc.main.view.panel.MotorPortListPanel.name=Motor ports
mvc.main.view.panel.MotorPortListPanel.emptyTable=There are no motor ports for this node.
mvc.main.view.panel.NodeListPanel$ResetDialog.title=Restart node
mvc.main.view.panel.NodeListPanel$ResetDialog.message=Are you sure you want to restart the node?
mvc.main.view.panel.NodeListPanel$ResetDialog.reset=Restart
mvc.main.view.panel.NodeListPanel$ResetDialog.cancel=Cancel
mvc.main.view.panel.NodeListPanel.title=Nodes
mvc.main.view.panel.NodePanel.title=Nodes
mvc.main.view.panel.ServoPortListPanel.name=Servo ports
mvc.main.view.panel.ServoPortListPanel.emptyTable=There are no servo ports for this node.
mvc.main.view.panel.ServoPortListPanel.absolutevalue=Absolute value:
mvc.main.view.panel.SoundPortListPanel.name=Sound ports
mvc.main.view.panel.SoundPortListPanel.emptyTable=There are no sound ports for this node.
mvc.main.view.panel.StatusButtonPanel.off=OFF
mvc.main.view.panel.StatusButtonPanel.off-tooltip=Current status is OFF. Press button to enable model time. 
mvc.main.view.panel.StatusButtonPanel.on=ON
mvc.main.view.panel.StatusButtonPanel.on-tooltip=Current status is ON. Press button to disable model time. 
mvc.main.view.panel.StatusButtonPanel.title=Status
mvc.main.view.statusbar.StatusBar.modeltime=This is the model time.
mvc.main.view.panel.SwitchPortListPanel.name=Switch ports
mvc.main.view.panel.SwitchPortListPanel.emptyTable=There are no switch ports for this node.
mvc.main.view.panel.SwitchPortListPanel.switch-port-title=Switch port type
mvc.main.view.panel.SwitchPortListPanel.switch-port-confirm=Switch port to switch port?
mvc.main.view.panel.EmptyPanel.name=Empty Panel
mvc.main.view.panel.CvDefinitionPanel.name=CV Definitions
mvc.main.view.panel.CvDefinitionPanel.column.cv=CV
mvc.main.view.panel.CvDefinitionPanel.column.description=Description
mvc.main.view.panel.CvDefinitionPanel.column.value=Value
mvc.main.view.panel.CvDefinitionPanel.column.newvalue=New value
mvc.main.view.panel.CvDefinitionPanel.column.mode=Mode
mvc.main.view.panel.CvDefinitionPanel.menu.readcvs=Read CVs
mvc.main.view.panel.CvDefinitionPanel.menu.writecvs=Write CVs
mvc.main.view.panel.CvDefinitionPanel.menu.readcv=Read CV
mvc.main.view.panel.CvDefinitionPanel.menu.writecv=Write CV
mvc.main.view.panel.CvDefinitionPanel.toolbar.readallcv=Read all CV values from the node
mvc.main.view.panel.CvDefinitionPanel.toolbar.readallcv.alttext=Read CV values
mvc.main.view.panel.CvDefinitionPanel.toolbar.writeallcv=Write the changed CV values to the node
mvc.main.view.panel.CvDefinitionPanel.toolbar.writeallcv.alttext=Write CV values
mvc.main.view.panel.CvDefinitionPanel.editor.save=Memorize
mvc.main.view.panel.CvDefinitionPanel.editor.reset=Reset
mvc.main.view.panel.CvDefinitionPanel.editor.cveditor=CV-Editor
mvc.main.view.panel.CvDefinitionPanel.fileinfo.title=Info from XML-File
mvc.main.view.panel.CvDefinitionPanel.fileinfo.xmlfile=XML file
mvc.main.view.panel.CvDefinitionPanel.fileinfo.version=Version
mvc.main.view.panel.CvDefinitionPanel.fileinfo.lastchange=Last change
mvc.main.view.panel.CvDefinitionPanel.fileinfo.author=Author
mvc.main.view.panel.CvDefinitionPanel.fileinfo.description=Description
mvc.main.view.panel.CvDefinitionPanel.saveCvDescription=Saved CV Definitions
mvc.main.view.panel.CvDefinitionPanel.discardPendingChanges.text=Pending changes in CV values detected that were not transfered to node yet.\r\nDiscard the changed CV values?
mvc.main.view.panel.CvDefinitionPanel.discardPendingChanges.title=Select node

mvc.main.view.panel.CvDefinitionPanel.toolbar.loadfromfile=Load CV values from file
mvc.main.view.panel.CvDefinitionPanel.toolbar.loadfromfile.alttext=Load saved CV values from file
mvc.main.view.panel.CvDefinitionPanel.toolbar.savetofile=Save CV values to file
mvc.main.view.panel.CvDefinitionPanel.toolbar.savetofile.alttext=Save current CV values to file

mvc.main.view.cvdef.CvBitfieldValueEditor.rebootrequired=A reboot of the node is required if the value is changed.
mvc.main.view.cvdef.CvByteValueEditor.rebootrequired=A reboot of the node is required if the value is changed.
mvc.main.view.cvdef.CvIntegerValueEditor.rebootrequired=A reboot of the node is required if the value is changed.
mvc.main.view.cvdef.DccAddrRGEditor.rebootrequired=A reboot of the node is required if the value is changed.
mvc.main.view.cvdef.CvRadioValueEditor.rebootrequired=A reboot of the node is required if the value is changed.
mvc.main.view.cvdef.CvRadioValueEditor.offset=Offset

mvc.main.view.panel.EmptyPanel.selectNodeFromList=Select a node from the node list with doubleclick.
mvc.main.view.panel.EmptyPanel.connect-to-system=BiDiB-system is not connected.
Connect using toolbar or menu.
mvc.main.view.panel.TabPanel.emptyLabel=No node selected
mvc.main.view.panel.TabPanel.title=Node Details

mvc.stepcontrol.view.StepControlPanel.toolbar.readallcv=Read all CV values from the node
mvc.stepcontrol.view.StepControlPanel.toolbar.readallcv.alttext=Read CV values
mvc.stepcontrol.view.StepControlPanel.toolbar.writeallcv=Write the changed CV values to the node
mvc.stepcontrol.view.StepControlPanel.toolbar.writeallcv.alttext=Write CV values

mvc.stepcontrol.view.StepControlPanel.name=StepControl
mvc.stepcontrol.view.StepControlPanel.newAspect=New
mvc.stepcontrol.view.StepControlPanel.deleteAspect=Delete
mvc.stepcontrol.view.StepControlPanel.aspect_has_pending_changes=The edited aspect has pending changes. Discard and continue?
mvc.stepcontrol.view.StepControlPanel.pending_changes=Pending changes
mvc.stepcontrol.view.StepControlPanel.apply=Apply
mvc.stepcontrol.view.StepControlPanel.reset=Reset
mvc.stepcontrol.view.StepControlPanel.max_aspect_message=Maximum number of aspects reached.
mvc.stepcontrol.view.StepControlPanel.max_aspect_title=New aspect
mvc.stepcontrol.view.StepControlPanel.loading_cvvalues=Loading CV values for StepControl.
mvc.stepcontrol.view.StepControlPanel.position=Position
mvc.stepcontrol.view.StepControlPanel.polarity=Polarity
mvc.stepcontrol.view.StepControlPanel.action=GO
mvc.stepcontrol.view.StepControlPanel.turntableType=TurnTable type
mvc.stepcontrol.view.StepControlPanel.occupancy=Occupancy

mvc.main.view.table.AbstractEmptyTable.chooseLabel=Please choose a name.

mvc.preferences.controller.PreferencesController.title-error=Error
mvc.preferences.controller.PreferencesController.fetch-port-identifiers-failed=Fetch port identifiers failed.\r\nThis can be caused by an old RXTXComm.jar in the extensions directory of the Java installation ({0}) !\r\nPlease remove the RXTXComm.jar from this directory before you run the BiDiB-Wizard.

mvc.preferences.view.PreferencesView.title=Preferences
mvc.preferences.view.PreferencesView.save=Save
mvc.preferences.view.PreferencesView.cancel=Cancel
mvc.preferences.view.PreferencesView.tab-misc=Miscellaneous
mvc.preferences.view.PreferencesView.tab-misc.tooltip=Miscellaneous
mvc.preferences.view.PreferencesView.tab-time=Time
mvc.preferences.view.PreferencesView.tab-time.tooltip=Time
mvc.preferences.view.PreferencesView.tab-railcomplus=RailCom Plus
mvc.preferences.view.PreferencesView.tab-railcomplus.tooltip=RailCom Plus
mvc.preferences.view.panel.MiscPanel.title=Miscellaneous
mvc.preferences.view.panel.MiscPanel.serialPort=Serial port
mvc.preferences.view.panel.MiscPanel.udpPort=UDP port
mvc.preferences.view.panel.MiscPanel.labelPath=Directory for XML files
mvc.preferences.view.panel.MiscPanel.logFilePath=Directory for log-files
mvc.preferences.view.panel.MiscPanel.udpMock=UDP simulation
mvc.preferences.view.panel.MiscPanel.serialMock=Serial simulation
mvc.preferences.view.panel.MiscPanel.powerUser=Power user
mvc.preferences.view.panel.MiscPanel.showBoosterTable=Show booster table by default
mvc.preferences.view.panel.MiscPanel.alwaysShowProductNameInTree=Always show product name in node tree
mvc.preferences.view.panel.MiscPanel.ignoreWaitTimeout=Ignore timeout while waiting for response
mvc.preferences.view.panel.MiscPanel.ignoreWrongReceiveMessageNumber=Ignore and adjust wrong RcvMessageNumber value
mvc.preferences.view.panel.MiscPanel.ignoreFlowControl=Do not use flowcontrol for communication with interface
mvc.preferences.view.panel.TimePanel.title=Time
mvc.preferences.view.panel.TimePanel.timeFactor=Multiplier
mvc.preferences.view.panel.TimePanel.startTime=Start time
mvc.preferences.view.panel.MiscPanel.firmwarePacketTimeout=Timeout for firmware packets
mvc.preferences.view.panel.RailcomPlusPanel.title=RailCom Plus

utils.IntegerEditor.revertTitle=Invalid Text Entered
utils.IntegerEditor.revertMessage=The value must be an integer between %1$d and %2$d.\nYou can either continue editing or revert to the last valid value.
utils.IntegerEditor.revert=Revert
utils.IntegerEditor.edit=Edit

comm.bidib.BidibCommunication.bidib-reset=Reset the BiDiBus.
comm.bidib.BidibCommunication.bidib-reset-passed=Reset the BiDiBus passed.
comm.bidib.BidibCommunication.bidib-nodes-loaded=Loaded nodes from BiDiBus.
comm.bidib.BidibCommunication.bidib-load-nodes-failed=Load nodes from BiDiBus failed!
comm.bidib.BidibCommunication.bidib-communication-failure=Communication with master was not established! Please check logfile.
comm.bidib.BidibCommunication.bidib-fetched-root=Fetched interface node. Start loading subnodes ...

comm.CommunicationFactory.open-port=Start open communication port.
comm.CommunicationFactory.no-port-selected=No comm port selected, do not create BidibCommunication.
comm.CommunicationFactory.open-port-failed=Open communication port failed: 
comm.CommunicationFactory.open-port-passed=Open communication port passed:
comm.CommunicationFactory.establish-communication-failed=Establish communication with interface failed.
comm.CommunicationFactory.check-debug-mode=Check if the GBMboost is running in DEBUG mode.
comm.CommunicationFactory.close-port-passed=Close communication port passed:

mvc.main.model.Node.column.cv=CV
mvc.main.model.Node.column.description=Description
mvc.main.model.Node.column.value=Value
mvc.main.model.Node.column.newvalue=New value
mvc.main.model.Node.column.mode=Mode

mvc.main.view.component.BulkSwitchNodeOperationsDialog.title=Bulk Switch Operations
mvc.main.view.component.BulkSwitchNodeOperationsDialog.perform=Perform
mvc.main.view.component.BulkSwitchNodeOperationsDialog.cancel=Cancel

mvc.dmx.view.DmxModelerView.title=DMX Modeler
mvc.dmx.model.DmxChannel.label=DMX Channel

mvc.dmx.view.DmxSceneryView.title=DMX Sceneries

mvc.dmx.view.panel.DmxChartPanel.add-point=Add point
mvc.dmx.view.panel.DmxChartPanel.remove-point=Remove point
mvc.dmx.view.panel.DmxChartPanel.set-port=Set port
mvc.dmx.view.panel.DmxChartPanel.add-macro=Set macro
mvc.dmx.view.panel.DmxChartPanel.set-action=Set action
mvc.dmx.view.panel.DmxChartPanel.add-point-failed=Add new point failed.

mvc.dmx.view.panel.DmxModelerPanel.brightness=Brightness [%]
mvc.dmx.view.panel.DmxModelerPanel.time-seconds=Time [s]
mvc.dmx.view.panel.DmxModelerPanel.time-milliseconds=Time [ms]

mvc.dmx.view.scenery.SceneryPanel.scenery=Scenery
mvc.dmx.view.scenery.SceneryPanel.open-viewer=Open viewer
mvc.dmx.view.scenery.SceneryPanel.new-scenery=New scenery
mvc.dmx.view.scenery.SceneryPanel.import-scenery=Import scenery
mvc.dmx.view.scenery.SceneryPanel.export-scenery=Export scenery
mvc.dmx.view.scenery.SceneryPanel.export-all-sceneries=Export all sceneries
mvc.dmx.view.scenery.SceneryPanel.transform-scenery=Transform scenery to macro
mvc.dmx.view.scenery.SceneryPanel.menu.add-dmx-channel=Add DMX channel
mvc.dmx.view.scenery.SceneryPanel.menu.remove-dmx-channel=Remove
mvc.dmx.view.scenery.SceneryPanel.menu.add-port=Add port
mvc.dmx.view.scenery.SceneryPanel.menu.remove-port=Remove port
mvc.dmx.view.scenery.SceneryPanel.menu.change-color=Change line color
mvc.dmx.view.scenery.SceneryPanel.reset=Reset
mvc.dmx.view.scenery.SceneryPanel.apply=Apply
mvc.dmx.view.scenery.SceneryPanel.sceneriesDescription=DMX Sceneries files
mvc.dmx.view.scenery.SceneryPanel.scenery-name=Scenery name
mvc.dmx.view.scenery.SceneryPanel.macro-number=Macro
mvc.dmx.view.scenery.SceneryPanel.dimm-stretch-up=Fade in
mvc.dmx.view.scenery.SceneryPanel.dimm-stretch-down=Fade out

mvc.dmx.view.scenery.SceneryPanel.dialog.remove-port.title=Remove port
mvc.dmx.view.scenery.SceneryPanel.dialog.remove-port.message=The port can't be removed because it is still assigned in the scenery: {0}

mvc.dmx.view.scenery.SceneryPanel.save_to_directory=Save to directory ...
mvc.dmx.view.scenery.SceneryPanel.dialog.warn=Warn
mvc.dmx.view.scenery.SceneryPanel.dialog.export_error=Error
mvc.dmx.view.scenery.SceneryPanel.dialog.export_scenery_failed=Export scenery ''{0}'' to file failed.
mvc.dmx.view.scenery.SceneryPanel.dialog.no_scenery_selected=No scenery selected.
mvc.dmx.view.scenery.SceneryPanel.dialog.selected_macro_not_available=The selected macro is not available: {0}
mvc.dmx.view.scenery.SceneryPanel.dialog.pending_changes=Pending scenery changes detected. Save scenery before continue?
mvc.dmx.view.scenery.SceneryPanel.dialog.no_scenery_or_points=No scenery selected or no points in scenery defined.

mvc.dmx.view.scenery.SceneryPanel.message.errors_detected=The following errors were detected:\n
mvc.dmx.view.scenery.SceneryPanel.error-port-without-action=The scenery point has no action assigned. Remove port or set an action. Time offset: {0}, DMX channel: {1}
mvc.dmx.view.scenery.SceneryPanel.error-port-without-port-or-macro=The scenery point has no port and no macro assigned. Time offset: {0}, DMX channel: {1}

mvc.dmx.view.scenery.DmxChannelSelectionPanel.title=Select DMX channels
mvc.dmx.view.scenery.DmxChannelSelectionPanel.cancel=Cancel
mvc.dmx.view.scenery.DmxChannelSelectionPanel.apply=Apply

mvc.dmx.view.scenery.PortSelectionPanel.title=Select ports
mvc.dmx.view.scenery.PortSelectionPanel.cancel=Cancel
mvc.dmx.view.scenery.PortSelectionPanel.apply=Apply

# booster table
mvc.booster.view.BoosterTableView.title=Booster Table
mvc.booster.view.BoosterTableView.empty_table=No boosters available
mvc.booster.view.BoosterTableTableModel.uniqueId=Unique ID
mvc.booster.view.BoosterTableTableModel.description=Description
mvc.booster.view.BoosterTableTableModel.status=Status
mvc.booster.view.BoosterTableTableModel.temperature=Temp.
mvc.booster.view.BoosterTableTableModel.voltage=Voltage
mvc.booster.view.BoosterTableTableModel.maxCurrent=max. Current
mvc.booster.view.BoosterTableTableModel.current=Current

# ping table
mvc.ping.view.PingTableView.title=Ping Table
mvc.ping.view.PingTableView.empty_table=No nodes available
mvc.ping.view.PingTableTableModel.uniqueId=Unique ID
mvc.ping.view.PingTableTableModel.description=Description
mvc.ping.view.PingTableTableModel.status=Status
mvc.ping.view.PingTableTableModel.interval=Interval

# console
mvc.console.view.ConsoleView.title=Console
mvc.console.view.ConsoleView.clear_console=Clear

# railcom plus view
mvc.railcomplus.view.RailcomPlusView.title=RailCom Plus
mvc.railcomplus.view.RailcomPlusView.tid=TID
mvc.railcomplus.view.RailcomPlusView.read_tid=Read TID
mvc.railcomplus.view.RailcomPlusView.update_sid=Update SID
mvc.railcomplus.view.RailcomPlusView.update_tid=Update TID
mvc.railcomplus.view.RailcomPlusView.ping_once_p0=PING ONCE P0
mvc.railcomplus.view.RailcomPlusView.ping_once_p1=PING ONCE P1
mvc.railcomplus.view.RailcomPlusView.ping=PING
mvc.railcomplus.view.RailcomPlusView.ping_off=PING OFF
mvc.railcomplus.view.RailcomPlusView.find_p0=FIND P0
mvc.railcomplus.view.RailcomPlusView.find_p1=FIND P1
mvc.railcomplus.view.RailcomPlusView.empty_table=No RailCom+ decoders available
mvc.railcomplus.view.RailcomPlusTableTableModel.manufacturer=Manufacturer
mvc.railcomplus.view.RailcomPlusTableTableModel.decmun=Decoder MUN
mvc.railcomplus.view.RailcomPlusTableTableModel.address=Address

mvc.railcomplus.controller.RailcomPlusController.no_commandstation_available=No command station node available! Operation aborted!

mvc.pomupdate.view.PomUpdateView.title=POM Decoder Update
mvc.pomupdate.view.PomUpdateView.decoderFile=Decoder File
mvc.pomupdate.view.PomUpdateView.select-decoderfile=Select
mvc.pomupdate.view.PomUpdateView.select-decoderfile.prompt=Select the decoder firmware for the update
mvc.pomupdate.view.PomUpdateView.show-decoderfile-info=Info
mvc.pomupdate.view.PomUpdateView.prepare-update=Prepare Update
mvc.pomupdate.view.PomUpdateView.prepare-force-update=Force Update
mvc.pomupdate.view.PomUpdateView.perform-update=Perform Update
mvc.pomupdate.view.PomUpdateView.empty_table=No decoder addresses available
mvc.pomupdate.view.PomUpdateView.addAddress=Add decoder address
mvc.pomupdate.view.PomUpdateView.removeAddress=Remove decoder address
mvc.pomupdate.view.PomUpdateView.loadDecoderInfo=Load decoder info
mvc.pomupdate.view.PomUpdateView.enterDecoderAddress.title=Decoder Address
mvc.pomupdate.view.PomUpdateView.enterDecoderAddress.message=Enter decoder address:
mvc.pomupdate.view.PomUpdateView.enterDecoderAddress.buttonAdd=Add
mvc.pomupdate.view.PomUpdateView.enterDecoderAddress.buttonCancel=Cancel
mvc.pomupdate.view.PomUpdateView.load-firmware-failed=Load decoder firmware from file failed.
mvc.pomupdate.view.PomUpdateView.invalid-firmware-file=The file does not contain a valid decoder firmware.
mvc.pomupdate.view.PomUpdateTableModel.address=Address
mvc.pomupdate.view.PomUpdateTableModel.vendor=Vendor
mvc.pomupdate.view.PomUpdateTableModel.model=Version (Model)
mvc.pomupdate.view.PomUpdateTableModel.prepareProgess=Prepare progress
mvc.pomupdate.view.PomUpdateTableModel.performProgess=Perform progress

mvc.pomupdate.view.DecoderFirmwareInfoDialog.title=Decoder firmware info
mvc.pomupdate.view.DecoderFirmwareInfoDialog.close=Close

mvc.common.model.BaudRateType.19200=for firmware update
mvc.common.model.BaudRateType.115200=for debug interface

mvc.debug.view.DebugInterfaceView.title=Debug Interface
mvc.debug.view.DebugInterfaceView.connect=Connect
mvc.debug.view.DebugInterfaceView.disconnect=Disconnect
mvc.debug.view.DebugInterfaceView.selectedPort=Port
mvc.debug.view.DebugInterfaceView.select-debug-port.prompt=Select debug port in settings
mvc.debug.view.DebugInterfaceView.selectedBaudRate=Baudrate
mvc.debug.view.DebugInterfaceView.transmitText=Send
mvc.debug.view.DebugInterfaceView.transmitText.prompt=Enter text to transmit
mvc.debug.view.DebugInterfaceView.transmit=Send
mvc.debug.view.DebugInterfaceView.selectFile=Select
mvc.debug.view.DebugInterfaceView.transmitFile=File
mvc.debug.view.DebugInterfaceView.transmitFile.prompt=Select file to transmit
mvc.debug.view.DebugInterfaceView.filter=Firmware files
mvc.debug.view.DebugInterfaceView.clear_console=Clear

mvc.debug.view.DebugInterfaceView.title-error=Error
mvc.debug.view.DebugInterfaceView.fetch-port-identifiers-failed=Fetch port identifiers failed.\r\nThis can be caused by an old RXTXComm.jar in the extensions directory of the Java installation ({0}) !\r\nPlease remove the RXTXComm.jar from this directory before you run the BiDiB-Wizard.

mvc.debug.view.FileTransferProgressDialog.title=File transfer
mvc.debug.view.FileTransferProgressDialog.cancel=Cancel
mvc.debug.view.FileTransferProgressDialog.progress=Progress

mvc.debug.controller.DebugInterfaceController.select-baudrate=Select a baudrate for the debug interface!
mvc.debug.controller.DebugInterfaceController.select-port=Select a port for the debug interface!

mvc.script.view.NodeScriptView.title=NodeScript
mvc.script.view.NodeScriptView.scriptFile=Script file
mvc.script.view.NodeScriptView.select-nodescript=Select
mvc.script.view.NodeScriptView.save-nodescript=Save
mvc.script.view.NodeScriptView.filter=NodeScript files
mvc.script.view.NodeScriptView.apply-on-node=Apply
mvc.script.view.NodeScriptView.selectedNode=Node

mvc.logger.view.LogPanelView.title=RX/TX Logview
mvc.logger.view.LogsPane.autoScrolls=AutoScroll
mvc.logger.view.LogsPane.clear=Clear

mvc.main.view.panel.NodeTree.node-error-reported=Node has reported an error: {0}

# label keys
labels.Labels.labeldirerror.message=The directory for XML files is not available or is not write enabled.\r\nSave labels of nodes, ports, macro und accessories is not possible!\r\nCheck permission on path: {0}
labels.Labels.labeldirerror.title=Directory permission
labels.Labels.labeldirerror.message_username_mismatch=The current username ''{0}'' does not match the configured username ''{1}''\r\nfor the directory for XML files:\r\n{2}\r\n\r\nCorrect the path and continue?
labels.Labels.labeldirerror.correct=Correct
labels.Labels.labeldirerror.ignore=Ignore
labels.Labels.labelfileerror.message=Save label to XML file failed because it is not available or is not write enabled!\r\nCheck permission on: {0}
labels.Labels.labelfileerror.title=File permission


# validation keys
not_empty=must not be empty
invalid_value=is not a valid value.
validation.cvvalue_key=CV value
validation.cvhighvalue_key=CV high value
validation.cvlowvalue_key=CV low value
validation.cvb0value_key=CV value
validation.cvb1value_key=CV value
validation.cvb2value_key=CV value
validation.cvb3value_key=CV value
validation.cvnumber_key=CV number
validation.address_key=Address
validation.address_short_key=Short address
validation.address_long_key=Long address
address_changed_automatically=was changed automatically. Please click the Acknowledge button
not_empty_for_write=must not be empty for write operation
not_empty_for_bit_verify=must not be empty for bit verify operation
validation.railcomplus_key=Railcom+
channel2_required=required activated channel 2
validation.switchtime_key=Switch Time
validation.current_address_key=Decoder Address
validation.sceneryname_key=Scenery name

org.bidib.jbidibc.core.exception.PortNotFoundException=Open port failed because port was not found:
org.bidib.jbidibc.core.exception.ReasonAware.causeTemplate=Open communication port failed: %s.\r\nReason: %s
org.bidib.jbidibc.core.exception.PortNotOpenedException.portInUse=Port is in use already.
org.bidib.jbidibc.core.exception.PortNotOpenedException.unknown=unknown
org.bidib.jbidibc.core.exception.PortNotFoundException.portNotFound=Port was not found. Check if interface is connected.
org.bidib.jbidibc.core.exception.InvalidConfigurationException.causeTemplate=Invalid configuration detected: %s
org.bidib.jbidibc.core.exception.InvalidConfigurationException.debug-interface-active=An active debug interface configuration was detected.
org.bidib.jbidibc.core.exception.NoAnswerException=No answer from connected device:
org.bidib.jbidibc.core.exception.NoAnswerException.bidib-communication-failure=Communication with master was not established! Please check logfile.
org.bidib.jbidibc.core.exception.NoAnswerException.bidib-communication-failure-debug-interface-active=Communication with master was not established!\r\nSerial bootloader is active on GBMboost:\r\n{0}

org.bidib.jbidibc.core.enumeration.PomDecoder.loco=POM locomotive
org.bidib.jbidibc.core.enumeration.PomDecoder.accessory=POM Accessory
org.bidib.jbidibc.core.enumeration.PomDecoder.extAccessory=POM Extended Accessory
org.bidib.jbidibc.core.enumeration.PomDecoder.decoderId=POM via Decoder ID

org.bidib.jbidibc.core.enumeration.PomOperation.read-block=read block
org.bidib.jbidibc.core.enumeration.PomOperation.read-byte=read byte
org.bidib.jbidibc.core.enumeration.PomOperation.write-bit=write bit
org.bidib.jbidibc.core.enumeration.PomOperation.write-byte=write byte

org.bidib.jbidibc.core.enumeration.PomAddressing.pom=POM
org.bidib.jbidibc.core.enumeration.PomAddressing.xpom=XPOM (railcom)

org.bidib.jbidibc.core.enumeration.PtOperation.prog-break=break current action
org.bidib.jbidibc.core.enumeration.PtOperation.prog-query=query remaining time
org.bidib.jbidibc.core.enumeration.PtOperation.prog-read-byte=read byte
org.bidib.jbidibc.core.enumeration.PtOperation.prog-read-write-bit=read/write bit
org.bidib.jbidibc.core.enumeration.PtOperation.prog-write-byte=write byte

org.bidib.jbidibc.core.enumeration.AddressMode.short=short
org.bidib.jbidibc.core.enumeration.AddressMode.long=long

org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_NONE=No error on node
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_TXT=Error on node: {0}
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_CRC=CRC error on node
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_SIZE=Invalid size of message received on node
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_SEQUENCE=Sequence error detected
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_PARAMETER=Invalid parameter detected
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_BUS=Error on bus detected: {0}
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_ADDRSTACK=Overflow in hierarchy on address stack detected: {0}
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_IDDOUBLE=ID already registered in node table.
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_SUBCRC=CRC error on subnode: {0}
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_SUBTIME=Timeout while receiving message from subnode: {0}
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_SUBPAKET=Consistence error in message from subnode
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_OVERRUN=Messages lost due to overrun condition
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_HW=Hardware error detected: {0}
org.bidib.jbidibc.core.enumeration.SysErrorEnum.BIDIB_ERR_RESET_REQUIRED=A restart of the node is required