bidib.BiDiBCV-251-118.xml Maven / Gradle / Ivy
<?xml version="1.0" encoding="UTF-8"?>
<VendorCV xmlns="http://www.bidib.org/schema/vendorcv"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:labels="http://www.bidib.org/schema/nodeLabels/1.0"
xsi:schemaLocation="http://www.bidib.org/schema/vendorcv /xsd/vendor_cv.xsd">
<Version Version="0.1" Lastupdate="20200324" Author="Kufer, Wolfgang" Pid="118" Vendor="251" Description="ReadyBoostProg Applikation"/>
<Templates>
<Template Name="About">
<CV Number="0" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="EEPROM Version"/>
<Description Lang="en-EN" Text="EEPROM Version"/>
</CV>
<CV Number="1" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Herstellerkennung"/>
<Description Lang="en-EN" Text="Vendor ID"/>
</CV>
<CV Number="2" Type="Int" Min="-" Max="-" Low="2" High="3" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Produktkennung (low)"/>
<Description Lang="en-EN" Text="ProductID (low)"/>
</CV>
<CV Number="3" Type="Int" Min="-" Max="-" Low="2" High="3" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Produktkennung (high)"/>
<Description Lang="en-EN" Text="ProductID (high)"/>
</CV>
<CV Number="4" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Firmware Version"/>
<Description Lang="en-EN" Text="Firmware main version"/>
</CV>
<CV Number="5" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Firmware Sub-Version"/>
<Description Lang="en-EN" Text="Firmware sub version"/>
</CV>
<CV Number="6" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Firmware Sub-Index"/>
<Description Lang="en-EN" Text="Firmware compile run"/>
</CV>
<CV Number="32" Type="Int" Min="0" Max="2054" Low="32" High="33" Values="-" Mode="rw">
<Description Lang="de-DE" Text="DCC Weichenadresse - Basis" Help="Diese Adresse wird bei Notfallbetrieb als Beginn des DCC-Adressbereiches genommen."/>
<Description Lang="en-EN" Text="DCC accessory address base" Help="This address is used for emergency operation mode, first used address"/>
</CV>
<CV Number="33" Type="Int" Min="0" Max="2054" Low="32" High="33" Values="-" Mode="rw">
<Description Lang="de-DE" Text="DCC Weichenadresse - Basis"/>
<Description Lang="en-EN" Text="DCC accessory address base"/>
</CV>
<CV Number="34" Type="Byte" Min="1" Max="128" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="DCC Weichenadresse - Bereich" Help="4 bedeutet 4 DCC Weichen = 8 Begriffe = 8 Macros"/>
<Description Lang="en-EN" Text="DCC accessory address range" Help="4 means 4 DCC turnouts = 8 coil commands = 8 macros"/>
</CV>
</Template>
<Template Name="Booster">
<CV Number="0" Type="Int" Min="-" Max="-" Low="0" High="1" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Booster Gain (low)"/>
<Description Lang="en-EN" Text="Booster Gain (low)"/>
</CV>
<CV Number="1" Type="Int" Min="-" Max="-" Low="0" High="1" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Booster Gain (high)"/>
<Description Lang="en-EN" Text="Booster Gain (high)"/>
</CV>
<CV Number="2" Type="Byte" Min="0" Max="1" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Trip current: 0=as featured, 1=5A"/>
<Description Lang="en-EN" Text="Trip current: 0=as featured, 1=5A"/>
</CV>
<CV Number="3" Type="Byte" Min="0" Max="250" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Booster Wiedereinschaltungen: 0=nie, 1...250 Anzahl Versuche, >250=immer" Help=" Anzahl Versuche der Wiedereinschaltung nach Kurzschluss."/>
<Description Lang="en-EN" Text="Booster activation retries: 0=never, 1...250 retry count, >250=forever" Help="Number of activation retries after shortcut." />
</CV>
<CV Number="5" Type="SignedChar" Min="-20" Max="20" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Temperaturoffset: 0=standard, positiv: Korrektur zu höheren Werten" Help="Die Temperaturmessung mit dem atxmega ist nicht sehr genau, mit diesem Offsetwert kann ein individueller Abgleich vorgenommen werden."/>
<Description Lang="en-EN" Text="Temperature offset: 0 default, otherwise add this value"/>
</CV>
<CV Number="6" Type="Byte" Min="0" Max="20" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Booster HW-Fehler Ignorierzeit [ms], sofortiges Wiedereinschalten bei Überstrommeldung der Hardware. Achtung: Vergrösserung kann zu Schäden an der Anlage führen!"/>
<Description Lang="en-EN" Text="Ignore Overcurrent from Hardware [ms], instant reenable after over current message from output stage. Attention: setting larger value could result in damages!"/>
</CV>
</Template>
<Template Name="ServiceMode">
<CV Number="6" Type="Byte" Min="0" Max="10" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="zus. RESET Pakets" Help="Durch zus?tzliche Resetpakete wird die Startphase beim Programmiermode l?nger"/>
<Description Lang="en-EN" Text="additional reset packets" />
</CV>
<CV Number="7" Type="Byte" Min="0" Max="10" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="zus. Programmbefehle" Help="Durch zus?tzliche Pakete wird beim Programmiermode l?nger beim Dekoder angefragt"/>
<Description Lang="en-EN" Text="additional program packets"/>
</CV>
<CV Number="9" Type="Byte" Min="20" Max="100" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Stromschwelle f?r Programmierquittung" Help="Normal 50mA, mit geringerer Schwelle auch LED Dekoder oder Faulhabermotoren m?glich"/>
<Description Lang="en-EN" Text="service mode current threshold for ACK"/>
</CV>
</Template>
<Template Name="DCCGEN">
<CV Number="0" Type="Byte" Min="0" Max="8" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Voreinstellung DCC-Format: 0=DCC14, 2=DCC28, 3=DCC128" Help="Nur relevant bei erstmaligen Aufruf einer Lok via Xpressnet."/>
<Description Lang="en-EN" Text="Default DCC format: 0=DCC14, 2=DCC28, 3=DCC128"/>
</CV>
<CV Number="1" Type="Byte" Min="0" Max="8" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Accessory-Repeat" Help="Wiederholungen Weichenbefehle"/>
<Description Lang="en-EN" Text="Accessory Repeat"/>
</CV>
<CV Number="2" Type="Byte" Min="0" Max="8" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Function-Repeat" Help="Wiederholungen Funktionen"/>
<Description Lang="en-EN" Text="Function Repeat"/>
</CV>
<CV Number="3" Type="Byte" Min="0" Max="8" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Speed-Repeat" Help="Wiederholungen Fahrbefehle"/>
<Description Lang="en-EN" Text="Speed-Repeat"/>
</CV>
<CV Number="4" Type="Byte" Min="10" Max="24" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="DCC Preamblebits" Help="nur fuer Protokollexperten"/>
<Description Lang="en-EN" Text="DCC preabmle bits"/>
</CV>
<CV Number="5" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Modell-Uhr (DCC Fast Clock)" Help="Beschleunigte Modellzeit."/>
<Description Lang="en-EN" Text="Fast Clock" Help="Layout time."/>
<Bitdescription Bitnum="1" Lang="de-DE" Text="Fast Clock auf DCC (altes Format)"/>
<Bitdescription Bitnum="1" Lang="en-EN" Text="Fast Clock on DCC (old format)"/>
<Bitdescription Bitnum="2" Lang="de-DE" Text="Fast Clock auf Xpressnet"/>
<Bitdescription Bitnum="2" Lang="en-EN" Text="Fast Clock on Xpressnet"/>
<Bitdescription Bitnum="3" Lang="de-DE" Text="Fast Clock auf DCC (neues Format)"/>
<Bitdescription Bitnum="3" Lang="en-EN" Text="Fast Clock on DCC (new format)"/>
</CV>
</Template>
</Templates>
<CVDefinition>
<Node Offset="1" Template="About">
<Nodetext Lang="de-DE" Text="Allgemeine Daten"/>
<Nodetext Lang="en-EN" Text="Common data"/>
</Node>
<Node Offset="81" Template="Booster">
<Nodetext Lang="de-DE" Text="Booster Einstellungen"/>
<Nodetext Lang="en-EN" Text="Booster settings"/>
</Node>
<Node Offset="71" Template="GBM">
<Nodetext Lang="de-DE" Text="Detektor Einstellungen"/>
<Nodetext Lang="en-EN" Text="Detector settings"/>
</Node>
<Node Offset="111" Template="DCCGEN">
<Nodetext Lang="de-DE" Text="Localer DCC-Generator"/>
<Nodetext Lang="en-EN" Text="Local DCC generator"/>
</Node>
<Node Offset="111" Template="ServiceMode">
<Nodetext Lang="de-DE" Text="Localer DCC-Generator"/>
<Nodetext Lang="en-EN" Text="Local DCC generator"/>
</Node>
</CVDefinition>
<Extension>
<NodeLabels lang="de-DE">
<labels:accessoryLabels>
<labels:accessoryLabel index="0" label="Betriebsart">
<labels:aspectLabel index="0" label="Booster (BiDiBus)"/>
<labels:aspectLabel index="1" label="Programmer (local DCC)"/>
<labels:aspectLabel index="2" label="Remote (external DCC)"/>
</labels:accessoryLabel>
</labels:accessoryLabels>
</NodeLabels>
<NodeLabels lang="en-EN">
<labels:accessoryLabels>
<labels:accessoryLabel index="0" label="Operating Mode">
<labels:aspectLabel index="0" label="Booster (BiDiBus)"/>
<labels:aspectLabel index="1" label="Programmer (local DCC)"/>
<labels:aspectLabel index="2" label="Remote (external DCC)"/>
</labels:accessoryLabel>
</labels:accessoryLabels>
</NodeLabels>
</Extension>
</VendorCV>
© 2015 - 2025 Weber Informatics LLC | Privacy Policy