bidib.BiDiBCV-13-205.xml Maven / Gradle / Ivy
<?xml version="1.0" encoding="UTF-8"?>
<VendorCV xmlns="http://www.bidib.org/schema/vendorcv"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bidib.org/schema/vendorcv /xsd/vendor_cv.xsd">
<Version Version="1.03.00" Lastupdate="20170307" Author="Tillner, Andreas" Pid="205" Vendor="013" Description="NeoControl Light"></Version>
<Templates>
<Template Name="About">
<CV Number="0" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="EEPROM Version"/>
<Description Lang="en-EN" Text="EEPROM Version"/>
</CV>
<CV Number="1" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Herstellerkennung"/>
<Description Lang="en-EN" Text="Vendor ID"/>
</CV>
<CV Number="2" Type="Int" Min="-" Max="-" Low="2" High="3" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Produktkennung (low)"/>
<Description Lang="en-EN" Text="ProductID (low)"/>
</CV>
<CV Number="3" Type="Int" Min="-" Max="-" Low="2" High="3" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Produktkennung (high)"/>
<Description Lang="en-EN" Text="ProductID (high)"/>
</CV>
<CV Number="4" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Firmware Version"/>
<Description Lang="en-EN" Text="Firmware main version"/>
</CV>
<CV Number="5" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Firmware Sub-Version"/>
<Description Lang="en-EN" Text="Firmware sub version"/>
</CV>
<CV Number="6" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Firmware Sub-Index"/>
<Description Lang="en-EN" Text="Firmware compile run"/>
</CV>
</Template>
<Template Name="Settings">
<CV Number="71" Type="Byte" Min="0" Max="1" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Accessory beim Einschalten wieder herstellen"/>
<Description Lang="en-EN" Text="Recover accessory aspect on power up"/>
</CV>
<CV Number="1021" Type="Byte" Min="0" Max="2" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Debug-Level" Help="// 0 = no Debug output, 1 = lightport index, 2 = lightport.volume and ws_data"/>
<Description Lang="en-EN" Text="Debug-Level" Help="// 0 = no Debug output, 1 = lightport index, 2 = lightport.volume and ws_data"/>
</CV>
<CV Number="1022" Type="Bit" Mode="rw" Values="1" Rebootneeded="true">
<Description Lang="de-DE" Text="Konfiguration WS28xx" />
<Description Lang="en-EN" Text="Configuration WS28xx"/>
<Bitdescription Bitnum="1" Lang="de-DE" Text="WS28xx Ausgang invertieren, 0 = externe HW, 1 = intern"/>
<Bitdescription Bitnum="1" Lang="en-EN" Text="Invert WS28xx output, 0 = external HW, 1 = intern"/>
</CV>
<CV Number="1023" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="WS28xx-Start-Nr. an Channel B" Help="Die Nummer der WS28xx, bei der die Ansteuerung von Channel B beginnt."/>
<Description Lang="en-EN" Text="WS28xx-Start-Nr. at Channel B" Help="Number of WS28xx, at which begin Channel B."/>
</CV>
<CV Number="1024" Type="Bit" Mode="rw" Values="1" >
<Description Lang="de-DE" Text="Konfiguration Output" />
<Description Lang="en-EN" Text="Configuration Output"/>
<Bitdescription Bitnum="1" Lang="de-DE" Text="Ausgangsports nach Boot. 0 = Aus, 1 = letzter Status"/>
<Bitdescription Bitnum="1" Lang="en-EN" Text="Output-Port at Boottime. 0 = Off, 1 = restore last status"/>
</CV>
<CV Number="1025" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Status des Ausgangsport" />
<Description Lang="en-EN" Text="Status of the Output-Port" />
</CV>
<CV Number="1026" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="VCC an Channel A, unteres Limit in 100 mV" />
<Description Lang="en-EN" Text="VCC on Channel A, lower limit in 100 mV" />
</CV>
<CV Number="1027" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="VCC an Channel A, oberes Limit in 100 mV" />
<Description Lang="en-EN" Text="VCC on Channel A, upper limit in 100 mV" />
</CV>
<CV Number="1028" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="VCC an Channel B, unteres Limit in 100 mV" />
<Description Lang="en-EN" Text="VCC on Channel B, lower limit in 100 mV" />
</CV>
<CV Number="1029" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="VCC an Channel B, oberes Limit in 100 mV" />
<Description Lang="en-EN" Text="VCC on Channel B, upper limit in 100 mV" />
</CV>
<CV Number="1033" Type="Bit" Min="-" Max="-" Low="-" High="-" Mode="rw" Values="-">
<Description Lang="de-DE" Text="Input-Port als Belegtmelder"/>
<Description Lang="en-EN" Text="Input-Port as occupancy"/>
<Bitdescription Bitnum="1" Lang="de-DE" Text="1 = Port 0 als Belegtmelder"/>
<Bitdescription Bitnum="1" Lang="en-EN" Text="1 = Port 0 as occupany"/>
<Bitdescription Bitnum="2" Lang="de-DE" Text="1 = Port 1 als Belegtmelder"/>
<Bitdescription Bitnum="2" Lang="en-EN" Text="1 = Port 1 as occupany"/>
<Bitdescription Bitnum="3" Lang="de-DE" Text="1 = Port 2 als Belegtmelder"/>
<Bitdescription Bitnum="3" Lang="en-EN" Text="1 = Port 2 as occupany"/>
<Bitdescription Bitnum="4" Lang="de-DE" Text="1 = Port 3 als Belegtmelder"/>
<Bitdescription Bitnum="4" Lang="en-EN" Text="1 = Port 3 as occupany"/>
<Bitdescription Bitnum="5" Lang="de-DE" Text="1 = Port 4 als Belegtmelder"/>
<Bitdescription Bitnum="5" Lang="en-EN" Text="1 = Port 4 as occupany"/>
<Bitdescription Bitnum="6" Lang="de-DE" Text="1 = Port 5 als Belegtmelder"/>
<Bitdescription Bitnum="6" Lang="en-EN" Text="1 = Port 5 as occupany"/>
<Bitdescription Bitnum="7" Lang="de-DE" Text="1 = Port 6 als Belegtmelder"/>
<Bitdescription Bitnum="7" Lang="en-EN" Text="1 = Port 6 as occupany"/>
<Bitdescription Bitnum="8" Lang="de-DE" Text="1 = Port 7 als Belegtmelder"/>
<Bitdescription Bitnum="8" Lang="en-EN" Text="1 = Port 7 as occupany"/>
</CV>
</Template>
</Templates>
<CVDefinition>
<Node Offset="1" Template="About">
<Nodetext Lang="de-DE" Text="Allgemeine Daten"/>
<Nodetext Lang="en-EN" Text="Common data"/>
</Node>
<Node Template="Settings">
<Nodetext Lang="de-DE" Text="Allgemeine Einstellungen"/>
<Nodetext Lang="en-EN" Text="Common settings"/>
</Node>
</CVDefinition>
</VendorCV>
© 2015 - 2025 Weber Informatics LLC | Privacy Policy