bidib.BiDiBCV-13-144.xml Maven / Gradle / Ivy
The newest version!
<?xml version="1.0" encoding="utf-8" ?>
<VendorCV xmlns="http://www.bidib.org/schema/vendorcv"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bidib.org/schema/vendorcv /xsd/vendor_cv.xsd">
<Version
Version="0.33"
Lastupdate="20200215"
Author="Michael"
Pid="144"
Vendor="013"
Description="BiDiBOne-OneDriveTurn, 4 Servos, GBM16T, 32 Macros, 20 Accessorys">
</Version>
<Templates>
<Template Name="About">
<CV Number="0" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="EEPROM Version"/>
<Description Lang="en-EN" Text="EEPROM Version"/>
</CV>
<CV Number="1" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Herstellerkennung"/>
<Description Lang="en-EN" Text="Vendor ID"/>
</CV>
<CV Number="2" Type="Int" Min="-" Max="-" Low="2" High="3" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Produktkennung (low)"/>
<Description Lang="en-EN" Text="ProductID (low)"/>
</CV>
<CV Number="3" Type="Int" Min="-" Max="-" Low="2" High="3" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Produktkennung (high)"/>
<Description Lang="en-EN" Text="ProductID (high)"/>
</CV>
<CV Number="4" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Firmware Version"/>
<Description Lang="en-EN" Text="Firmware main version"/>
</CV>
<CV Number="5" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Firmware Sub-Version"/>
<Description Lang="en-EN" Text="Firmware sub version"/>
</CV>
<CV Number="6" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Firmware Sub-Index"/>
<Description Lang="en-EN" Text="Firmware compile run"/>
</CV>
<CV Number="32" Type="Int" Min="0" Max="2054" Low="32" High="33" Values="-" Mode="rw">
<Description Lang="de-DE" Text="DCC Weichenadresse - Basis" Help="Diese Adresse wird bei Notfallbetrieb als Beginn des DCC-Adressbereiches genommen."/>
<Description Lang="en-EN" Text="DCC accessory address base" Help="This address is used for emergency operation mode, first used address"/>
</CV>
<CV Number="33" Type="Int" Min="0" Max="2054" Low="32" High="33" Values="-" Mode="rw">
<Description Lang="de-DE" Text="DCC Weichenadresse - Basis"/>
<Description Lang="en-EN" Text="DCC accessory address base" />
</CV>
<CV Number="34" Type="Byte" Min="1" Max="128" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="DCC Weichenadresse - Bereich" Help="4 bedeutet 4 DCC Weichen = 8 Begriffe = 8 Macros"/>
<Description Lang="en-EN" Text="DCC accessory address range" Help="4 means 4 DCC turnouts = 8 coil commands = 8 macros"/>
</CV>
</Template>
<Template Name="AccessoryMap">
<CV Number="0" Type="Byte" Min="0" Max="8" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Aktueller Aspekt"/>
<Description Lang="en-EN" Text="Current aspect"/>
</CV>
<CV Number="1" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Makro für Begriff 0"/>
<Description Lang="en-EN" Text="Macro for aspect 0"/>
</CV>
<CV Number="2" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Makro für Begriff 1"/>
<Description Lang="en-EN" Text="Macro for aspect 1"/>
</CV>
<CV Number="3" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Makro für Begriff 2"/>
<Description Lang="en-EN" Text="Macro for aspect 2"/>
</CV>
<CV Number="4" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Makro für Begriff 3"/>
<Description Lang="en-EN" Text="Macro for aspect 3"/>
</CV>
<CV Number="5" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Makro für Begriff 4"/>
<Description Lang="en-EN" Text="Macro for aspect 4"/>
</CV>
<CV Number="6" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Makro für Begriff 5"/>
<Description Lang="en-EN" Text="Macro for aspect 5"/>
</CV>
<CV Number="7" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Makro für Begriff 6"/>
<Description Lang="en-EN" Text="Macro for aspect 6"/>
</CV>
<CV Number="8" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Start mit Aspekt: 255=kein, 254=letzter, 0..127=Nr."/>
<Description Lang="en-EN" Text="Startup aspect: 255=no one, 254=last, 0..127=number"/>
</CV>
</Template>
<Template Name="Motordrive-Output">
<CV Number="0" Type="Bit" Min="-" Max="-" Low="-" High="-" Values="16" Mode="rw" Rebootneeded="false">
<Description Lang="de-DE" Text="Konfiguration"/>
<Description Lang="en-EN" Text="Configuration"/>
<Bitdescription Bitnum="1" Lang="de-DE" Text="reserviert" />
<Bitdescription Bitnum="1" Lang="en-EN" Text="reserved" />
<Bitdescription Bitnum="2" Lang="de-DE" Text="reserviert" />
<Bitdescription Bitnum="2" Lang="en-EN" Text="reserved" />
<Bitdescription Bitnum="3" Lang="de-DE" Text="Impulsbetrieb: 0=ohne, 1=mit"/>
<Bitdescription Bitnum="3" Lang="en-EN" Text="One-shot Pulse: 0=false, 1=true"/>
<Bitdescription Bitnum="4" Lang="de-DE" Text="Motorpaar: 0=ohne, 1=mit"/>
<Bitdescription Bitnum="4" Lang="en-EN" Text="Motor Pair: 0=false, 1=true"/>
<Bitdescription Bitnum="5" Lang="de-DE" Text="Motorschutz: 0=ohne, 1=mit"/>
<Bitdescription Bitnum="5" Lang="en-EN" Text="Motor Protection: 0=false, 1=true"/>
</CV>
<CV Number="2" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Puls-Ticks: 0, 1..255 [20 ms]"/>
<Description Lang="en-EN" Text="Pulse Ticks: 0, 1..255 [20 ms]"/>
</CV>
<CV Number="3" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Motorschutzinterval: 0, 1..255 [20 ms]"/>
<Description Lang="en-EN" Text="Motor Protection Interval: 0, 1..255 [20 ms]"/>
</CV>
</Template>
<Template Name="GPIO">
<CV Number="0" Type="Bit" Min="-" Max="-" Low="-" High="-" Values="-" Mode="ro" Rebootneeded="false">
<Description Lang="de-DE" Text="Konfiguration"/>
<Description Lang="en-EN" Text="Configuration"/>
<Bitdescription Bitnum="1" Lang="de-DE" Text="Richtung: 0=Ausgang, 1=Eingang"/>
<Bitdescription Bitnum="1" Lang="en-EN" Text="Direction: 0=output, 1=input"/>
<Bitdescription Bitnum="2" Lang="de-DE" Text="Invertierung (Eingang): 0=ja, 1=nein"/>
<Bitdescription Bitnum="2" Lang="en-EN" Text="Inversion (input): 0=true, 1=false"/>
<Bitdescription Bitnum="3" Lang="de-DE" Text="Impulsbetrieb (Ausgang): 0=ohne, 1=mit"/>
<Bitdescription Bitnum="3" Lang="en-EN" Text="One-shot Pulse (output): 0=false, 1=true"/>
<Bitdescription Bitnum="4" Lang="de-DE" Text="Spulenpaar: 0=ohne, 1=mit"/>
<Bitdescription Bitnum="4" Lang="en-EN" Text="Coil Pair: 0=false, 1=true"/>
</CV>
<CV Number="2" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Pulse-Ticks: 0, 1...255 [20 ms]"/>
<Description Lang="en-EN" Text="Pulse Ticks: 0, 1...255 [20 ms]"/>
</CV>
</Template>
<Template Name="Servo">
<CV Number="0" Type="Int" Min="-" Max="-" Low="0" High="1" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Min Low"/>
<Description Lang="en-EN" Text="Min Low"/>
</CV>
<CV Number="1" Type="Int" Min="-" Max="-" Low="0" High="1" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Min High"/>
<Description Lang="en-EN" Text="Min High"/>
</CV>
<CV Number="2" Type="Int" Min="-" Max="-" Low="2" High="3" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Max Low"/>
<Description Lang="en-EN" Text="Max Low"/>
</CV>
<CV Number="3" Type="Int" Min="-" Max="-" Low="2" High="3" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Max High"/>
<Description Lang="en-EN" Text="Max High"/>
</CV>
<CV Number="4" Type="Bit" Min="-" Max="-" Low="-" High="-" Values="160" Mode="rw" Rebootneeded="true">
<Description Lang="de-DE" Text="Modus" />
<Description Lang="en-EN" Text="Mode" />
<Bitdescription Bitnum="1" Lang="de-DE" Text="reserviert" />
<Bitdescription Bitnum="1" Lang="en-EN" Text="reserved" />
<Bitdescription Bitnum="2" Lang="de-DE" Text="reserviert" />
<Bitdescription Bitnum="2" Lang="en-EN" Text="reserved" />
<Bitdescription Bitnum="3" Lang="de-DE" Text="reserviert" />
<Bitdescription Bitnum="3" Lang="en-EN" Text="reserved" />
<Bitdescription Bitnum="4" Lang="de-DE" Text="reserviert" />
<Bitdescription Bitnum="4" Lang="en-EN" Text="reserved" />
<Bitdescription Bitnum="5" Lang="de-DE" Text="reserviert" />
<Bitdescription Bitnum="5" Lang="en-EN" Text="reserved" />
<Bitdescription Bitnum="6" Lang="de-DE" Text="Impulse auch bei keiner Bewegung: 0=nein, 1=ja" />
<Bitdescription Bitnum="6" Lang="en-EN" Text="servo pulses even when not moving: 0=false, 1=true" />
<Bitdescription Bitnum="7" Lang="de-DE" Text="reserviert" />
<Bitdescription Bitnum="7" Lang="en-EN" Text="reserved" />
<Bitdescription Bitnum="8" Lang="de-DE" Text="Stretch: 0=[1ms..2ms], 1=[0.5..2.5ms]" />
<Bitdescription Bitnum="8" Lang="en-EN" Text="Stretch: 0=[1ms..2ms], 1=[0.5..2.5ms]" />
</CV>
<CV Number="5" Type="Byte" Min="-" Max="-" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Wiederholung: 0 keine Wiederholung, 1 Wiederholung"/>
<Description Lang="en-EN" Text="Repeat: 0 no repeat, 1 repeat"/>
</CV>
<CV Number="6" Type="Byte" Min="0" Max="1" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Position: 0 vor Bewegung A, 1 vor Bewegung B"/>
<Description Lang="en-EN" Text="Location: 0 befor move A, 1 befor move B"/>
</CV>
<CV Number="7" Type="Byte" Min="-" Max="-" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kurveneinstellungen für A"/>
<Description Lang="en-EN" Text="curve settings for A"/>
</CV>
<CV Number="8" Type="Byte" Min="-" Max="-" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kurvenverzögerung A"/>
<Description Lang="en-EN" Text="curve delay for A"/>
</CV>
<CV Number="9" Type="Byte" Min="-" Max="-" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kurveneinstellungen für B"/>
<Description Lang="en-EN" Text="curve settings for B"/>
</CV>
<CV Number="10" Type="Byte" Min="-" Max="-" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kurvenverzögerung B"/>
<Description Lang="en-EN" Text="curve delay for B"/>
</CV>
<CV Number="14" Type="Byte" Min="-" Max="-" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Power OFF: 0 nicht abschalten, n * 20 ms"/>
<Description Lang="en-EN" Text="Power OFF: 0 no off, n * 20 ms"/>
</CV>
<CV Number="15" Type="Byte" Min="0" Max="127" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Pre Power: Einschalten, Power n * 5 ms vor Puls"/>
<Description Lang="en-EN" Text="Pre Power: power up n * 5 ms before pulse"/>
</CV>
</Template>
<Template Name="GBM16T" SkipOnTimeout="true">
<Node Offset="0" Template="Common">
<Nodetext Lang="de-DE" Text="Allgemeine Einstellungen"/>
<Nodetext Lang="en-EN" Text="Common settings"/>
</Node>
<Node Offset="0" Template="Reverser">
<Nodetext Lang="de-DE" Text="Kehrschleife"/>
<Nodetext Lang="en-EN" Text="Reverser"/>
</Node>
<Node Offset="0" Template="Inhibit">
<Nodetext Lang="de-DE" Text="Inhibit Einstellungen"/>
<Nodetext Lang="en-EN" Text="Inhibit settings"/>
</Node>
<Node Offset="0" Template="Speed">
<Nodetext Lang="de-DE" Text="Geschwindigkeitsmessung"/>
<Nodetext Lang="en-EN" Text="Speed measuring"/>
</Node>
</Template>
<Template Name="Common">
<CV Number="7" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Vendor GBM16T"/>
<Description Lang="en-EN" Text="Vendor GBM16T"/>
</CV>
<CV Number="36" Type="Byte" Min="-" Max="-" Low="-" High="-" Values="0;1" Mode="rw">
<Description Lang="de-DE" Text="0: keine Stromquelle, 1: 10mA, wenn kein DCC" Help="Ersatzspeisung nötig; Analogmode in den Dekodern sollte abgeschaltet sein"/>
<Description Lang="en-EN" Text="0: no I source, 1: 10mA, if no DCC" Help="Extra power supply required; turn off analogue mode in decoders"/>
</CV>
<CV Number="37" Type="Byte" Min="1" Max="10" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Gedulteter Offset ADC" Help="nur bei Kalibierung relevant"/>
<Description Lang="en-EN" Text="Allowed Offset ADC" Help="only for calibration"/>
</CV>
<CV Number="38" Type="Byte" Min="2" Max="20" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Channel 1 Filter" Help="So oft muss eine Adressnachricht in Channel 1 fehlerfrei empfangen werden."/>
<Description Lang="en-EN" Text="Channel 1 Filter" Help="Number of required channel 1 address messages"/>
</CV>
<CV Number="39" Type="Byte" Min="2" Max="20" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Channel 2 Filter" Help="So oft muss eine Quittung in Channel 2 mind. empfangen werden."/>
<Description Lang="en-EN" Text="Channel 2 Filter" Help="Number of required channel 2 response messages"/>
</CV>
<CV Number="40" Type="Byte" Min="0" Max="16" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Channel for Accessory" Help="An diesem Eingang sind Accessory angeschlossen."/>
<Description Lang="en-EN" Text="Channel 2 Filter" Help="Accessory decoders are connected to this input channel"/>
</CV>
<CV Number="42" Type="Byte" Min="1" Max="200" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Störungsunterdrückung" Help="So lange muss das Eingangssignal mind. über der Schwelle sein. Einheit 1ms"/>
<Description Lang="en-EN" Text="Spike Suppression" Help="Required time for input above threshold, unit 1ms"/>
</CV>
<CV Number="43" Type="Byte" Min="2" Max="100" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Memory (Einheit 100ms)" Help="Haltezeit des Melders, so lange bleibt er mind. an"/>
<Description Lang="en-EN" Text="Memory (Unit 100ms" Help="Hodltime"/>
</CV>
<CV Number="44" Type="Byte" Min="4" Max="100" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Ansprechschwelle (DCC an)" Help="Einheit 0,5mV; 12: erkennt 40kOhm, 24: erkennt 20kOhm"/>
<Description Lang="en-EN" Text="Threshold (DCC on)" Help="unit 0.5mV; 12: detects 40kOhm; 24: detects 20kOhm"/>
</CV>
<CV Number="45" Type="Byte" Min="2" Max="50" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Ansprechschwelle (DCC aus)" Help="Einheit 0,5mV; empfohlen: etwas halber Wert wie bei DCC an"/>
<Description Lang="en-EN" Text="Threshold (DCC off)" Help="unit 0.5mV; recommended: half the value of DCC on"/>
</CV>
<CV Number="70" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kalibrierung gültig" Help="0=ungültig, 1=ungültig, auch Backup löschen"/>
<Description Lang="en-EN" Text="Adjustment valid" Help="0=void, 1=void, also delete backup"/>
</CV>
</Template>
<Template Name="Reverser">
<CV Number="1" Type="DccAccAddr" Min="-" Max="-" Low="1" High="9" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Dekoderadresse (low)"/>
<Description Lang="en-EN" Text="Decoder address (low)"/>
</CV>
<CV Number="9" Type="DccAccAddr" Min="-" Max="-" Low="1" High="9" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Dekoderadresse (high)"/>
<Description Lang="en-EN" Text="Decoder address (high)"/>
</CV>
<CV Number="51" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Kehrschleife aktuelle Stellung"/>
<Description Lang="en-EN" Text="Reverser Current Position"/>
</CV>
<CV Number="46" Type="GBM16TReverser" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kehrschleife Modus"/>
<Description Lang="en-EN" Text="Reverser Mode"/>
</CV>
<CV Number="47" Type="GBM16TReverser" Min="0" Max="255" Low="47" High="48" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kehrschleife On Low"/>
<Description Lang="en-EN" Text="Reverser On Low"/>
</CV>
<CV Number="48" Type="GBM16TReverser" Min="0" Max="255" Low="47" High="48" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kehrschleife On High"/>
<Description Lang="en-EN" Text="Reverser On High"/>
</CV>
<CV Number="49" Type="GBM16TReverser" Min="0" Max="255" Low="49" High="50" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kehrschleife Off Low"/>
<Description Lang="en-EN" Text="Reverser Off Low"/>
</CV>
<CV Number="50" Type="GBM16TReverser" Min="0" Max="255" Low="49" High="50" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kehrschleife Off High"/>
<Description Lang="en-EN" Text="Reverser Off High"/>
</CV>
<CV Number="65" Type="GBM16TReverser" Min="0" Max="255" Low="65" High="66" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kehrschleife Prio Low"/>
<Description Lang="en-EN" Text="Reverser Prio Low"/>
</CV>
<CV Number="66" Type="GBM16TReverser" Min="0" Max="255" Low="65" High="66" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kehrschleife Prio High"/>
<Description Lang="en-EN" Text="Reverser Prio High"/>
</CV>
</Template>
<Template Name="Inhibit">
<CV Number="61" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Inhibit On, aktueller Zustand"/>
<Description Lang="en-EN" Text="Inhibit On, current state"/>
</CV>
<CV Number="59" Type="DCC_ADDR_RG" Min="0" Max="255" Low="59" High="60" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Inhibit On, Addr (Low)"/>
<Description Lang="en-EN" Text="Inhibit On, Addr (Low)"/>
</CV>
<CV Number="60" Type="DCC_ADDR_RG" Min="0" Max="255" Low="59" High="60" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Inhibit On, Addr (High)"/>
<Description Lang="en-EN" Text="Inhibit On, Addr (High)"/>
</CV>
<CV Number="64" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Inhibit Off, aktueller Zustand"/>
<Description Lang="en-EN" Text="Inhibit Off, current state"/>
</CV>
<CV Number="62" Type="DCC_ADDR_RG" Min="0" Max="255" Low="62" High="63" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Inhibit Off, Addr (Low)"/>
<Description Lang="en-EN" Text="Inhibit Off, Addr (Low)"/>
</CV>
<CV Number="63" Type="DCC_ADDR_RG" Min="0" Max="255" Low="62" High="63" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Inhibit Off, Addr (High)"/>
<Description Lang="en-EN" Text="Inhibit Off, Addr (High)"/>
</CV>
</Template>
<Template Name="Speed">
<CV Number="52" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Maßstab"/>
<Description Lang="en-EN" Text="Scale"/>
</CV>
<CV Number="53" Type="Int" Min="0" Max="255" Low="53" High="54" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Länge [mm] (low)"/>
<Description Lang="en-EN" Text="Length [mm] (low)"/>
</CV>
<CV Number="54" Type="Int" Min="0" Max="255" Low="53" High="54" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Länge [mm] (high)"/>
<Description Lang="en-EN" Text="Length [mm] (high)"/>
</CV>
<CV Number="55" Type="Int" Min="0" Max="255" Low="55" High="56" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Startmelder (low)"/>
<Description Lang="en-EN" Text="Start detector (low)"/>
</CV>
<CV Number="56" Type="Int" Min="0" Max="255" Low="55" High="56" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Startmelder (high)"/>
<Description Lang="en-EN" Text="Start detector (high)"/>
</CV>
<CV Number="57" Type="Int" Min="0" Max="255" Low="57" High="58" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Stopmelder (low)"/>
<Description Lang="en-EN" Text="Stop detector (low)"/>
</CV>
<CV Number="58" Type="Int" Min="0" Max="255" Low="57" High="58" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Stopmelder (high)"/>
<Description Lang="en-EN" Text="Stop detector (high)"/>
</CV>
</Template>
</Templates>
<CVDefinition>
<Node Offset="1" Template="About">
<Nodetext Lang="de-DE" Text="Allgemeine Daten"/>
<Nodetext Lang="en-EN" Text="Common Data"/>
</Node>
<Node>
<Nodetext Lang="de-DE" Text="Allgemeine Einstellungen"/>
<Nodetext Lang="en-EN" Text="Common Settings"/>
<CV Number="71" Type="Byte" Min="0" Max="1" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Accessory beim Einschalten wieder herstellen"/>
<Description Lang="en-EN" Text="Recover accessory aspect on power up"/>
</CV>
</Node>
<Node>
<Nodetext Lang="de-DE" Text="Servos"/>
<Nodetext Lang="en-EN" Text="Servos"/>
<Node Offset="81" Template="Servo" Count="8" Next="16">
<Nodetext Lang="de-DE" Text="Servo %%d"/>
<Nodetext Lang="en-EN" Text="Servo %%d"/>
</Node>
</Node>
<Node>
<Nodetext Lang="de-DE" Text="Accessories"/>
<Nodetext Lang="en-EN" Text="Accessories"/>
<Node Offset="209" Template="AccessoryMap" Count="20" Next="9">
<Nodetext Lang="de-DE" Text="Accessory %%d"/>
<Nodetext Lang="en-EN" Text="Accessory %%d"/>
</Node>
</Node>
<Node>
<Nodetext Lang="de-DE" Text="Motortreiber-Ausgänge"/>
<Nodetext Lang="en-EN" Text="Motordrive Outputs"/>
<Node Offset="512" Template="Motordrive-Output" Count="1" Next="8">
<Nodetext Lang="de-DE" Text="Ausgang 0"/>
<Nodetext Lang="en-EN" Text="Output 0"/>
</Node>
<Node Offset="528" Template="Motordrive-Output" Count="1" Next="8">
<Nodetext Lang="de-DE" Text="Ausgang 2"/>
<Nodetext Lang="en-EN" Text="Output 2"/>
</Node>
<Node Offset="544" Template="Motordrive-Output" Count="1" Next="8">
<Nodetext Lang="de-DE" Text="Ausgang 4"/>
<Nodetext Lang="en-EN" Text="Output 4"/>
</Node>
<Node Offset="560" Template="Motordrive-Output" Count="1" Next="8">
<Nodetext Lang="de-DE" Text="Ausgang 6"/>
<Nodetext Lang="en-EN" Text="Output 6"/>
</Node>
<Node Offset="576" Template="Motordrive-Output" Count="1" Next="8">
<Nodetext Lang="de-DE" Text="Ausgang 8"/>
<Nodetext Lang="en-EN" Text="Output 8"/>
</Node>
<Node Offset="592" Template="Motordrive-Output" Count="1" Next="8">
<Nodetext Lang="de-DE" Text="Ausgang 10"/>
<Nodetext Lang="en-EN" Text="Output 10"/>
</Node>
<Node Offset="608" Template="Motordrive-Output" Count="1" Next="8">
<Nodetext Lang="de-DE" Text="Ausgang 12"/>
<Nodetext Lang="en-EN" Text="Output 12"/>
</Node>
<Node Offset="624" Template="Motordrive-Output" Count="1" Next="8">
<Nodetext Lang="de-DE" Text="Ausgang 14"/>
<Nodetext Lang="en-EN" Text="Output 14"/>
</Node>
</Node>
<Node>
<Nodetext Lang="de-DE" Text="GPIO"/>
<Nodetext Lang="en-EN" Text="GPIO"/>
<Node Offset="640" Template="GPIO" Count="16" Next="8">
<Nodetext Lang="de-DE" Text="GPIO %%d"/>
<Nodetext Lang="en-EN" Text="GPIO %%d"/>
</Node>
</Node>
<Node>
<Nodetext Lang="de-DE" Text="GBM16T"/>
<Nodetext Lang="en-EN" Text="GBM16T"/>
<Node Offset="10000" Template="GBM16T" Count="1" Next="10000">
<Nodetext Lang="de-DE" Text="GBM16T-%%d"/>
<Nodetext Lang="en-EN" Text="GBM16T-%%d"/>
</Node>
</Node>
</CVDefinition>
</VendorCV>
© 2015 - 2024 Weber Informatics LLC | Privacy Policy