bidib.BiDiBCV-62-147.xml Maven / Gradle / Ivy
The newest version!
<?xml version="1.0" encoding="UTF-8"?>
<VendorCV xmlns="http://www.bidib.org/schema/vendorcv" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bidib.org/schema/vendorcv /xsd/vendor_cv.xsd">
<Version Version="0.2" Lastupdate="20150214" Author="Kersten Tams" Pid="147" Vendor="62" Description="HERMES"/>
<Templates>
<Template Name="About">
<CV Number="0" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="EEPROM Version"/>
<Description Lang="en-EN" Text="EEPROM Version"/>
</CV>
<CV Number="1" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Herstellerkennung"/>
<Description Lang="en-EN" Text="Vendor ID"/>
</CV>
<CV Number="2" Type="Int" Min="-" Max="-" Low="2" High="3" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Produktkennung (low)"/>
<Description Lang="en-EN" Text="ProductID (low)"/>
</CV>
<CV Number="3" Type="Int" Min="-" Max="-" Low="2" High="3" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Produktkennung (high)"/>
<Description Lang="en-EN" Text="ProductID (high)"/>
</CV>
<CV Number="4" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Firmware Version"/>
<Description Lang="en-EN" Text="Firmware main version"/>
</CV>
<CV Number="5" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Firmware Sub-Version"/>
<Description Lang="en-EN" Text="Firmware sub version"/>
</CV>
<CV Number="6" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Firmware Sub-Index"/>
<Description Lang="en-EN" Text="Firmware compile run"/>
</CV>
<CV Number="32" Type="Int" Min="0" Max="2054" Low="32" High="33" Values="-" Mode="rw">
<Description Lang="de-DE" Text="DCC Weichenadresse - Basis" Help="Diese Adresse wird bei Notfallbetrieb als Beginn des DCC-Adressbereiches genommen."/>
<Description Lang="en-EN" Text="DCC accessory address base" Help="This address is used for emergency operation mode, first used address"/>
</CV>
<CV Number="33" Type="Int" Min="0" Max="2054" Low="32" High="33" Values="-" Mode="rw">
<Description Lang="de-DE" Text="DCC Weichenadresse - Basis"/>
<Description Lang="en-EN" Text="DCC accessory address base"/>
</CV>
<CV Number="34" Type="Byte" Min="1" Max="128" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="DCC Weichenadresse - Bereich" Help="4 bedeutet 4 DCC Weichen = 8 Begriffe = 8 Macros"/>
<Description Lang="en-EN" Text="DCC accessory address range" Help="4 means 4 DCC turnouts = 8 coil commands = 8 macros"/>
</CV>
</Template>
<Template Name="POM" SkipOnTimeout="true">
<CV Number="23" Type="Byte" Min="0" Max="4" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="POM Wiederholung"/>
<Description Lang="en-EN" Text="POM Repeat"/>
</CV>
</Template>
<Template Name="GBM16T" SkipOnTimeout="true">
<Node Offset="0" Template="Common">
<Nodetext Lang="de-DE" Text="Allgemeine Einstellungen"/>
<Nodetext Lang="en-EN" Text="Common settings"/>
</Node>
<Node Offset="0" Template="Speed">
<Nodetext Lang="de-DE" Text="Geschwindigkeitsmessung"/>
<Nodetext Lang="en-EN" Text="Speed measuring"/>
</Node>
</Template>
<Template Name="Common">
<CV Number="7" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Vendor Hermes"/>
<Description Lang="en-EN" Text="Vendor Hermes"/>
</CV>
<CV Number="36" Type="Byte" Min="-" Max="-" Low="-" High="-" Values="0;1" Mode="rw">
<Description Lang="de-DE" Text="0: keine Stromquelle, 1: 10mA, wenn kein DCC" Help="Ersatzspeisung nötig; Analogmode in den Dekodern sollte abgeschaltet sein"/>
<Description Lang="en-EN" Text="0: no I source, 1: 10mA, if no DCC" Help="Extra power supply required; turn off analogue mode in decoders"/>
</CV>
<CV Number="37" Type="Byte" Min="1" Max="10" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Gedulteter Offset ADC" Help="nur bei Kalibierung relevant"/>
<Description Lang="en-EN" Text="Allowed Offset ADC" Help="only for calibration"/>
</CV>
<CV Number="38" Type="Byte" Min="2" Max="20" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Channel 1 Filter" Help="So oft muss eine Adressnachricht in Channel 1 fehlerfrei empfangen werden."/>
<Description Lang="en-EN" Text="Channel 1 Filter" Help="Number of required channel 1 address messages"/>
</CV>
<CV Number="39" Type="Byte" Min="2" Max="20" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Channel 2 Filter" Help="So oft muss eine Quittung in Channel 2 mind. empfangen werden."/>
<Description Lang="en-EN" Text="Channel 2 Filter" Help="Number of required channel 2 response messages"/>
</CV>
<CV Number="40" Type="Byte" Min="0" Max="15" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Channel for Accessory" Help="An diesem Eingang sind Accessory angeschlossen."/>
<Description Lang="en-EN" Text="Channel 2 Filter" Help="Accessory decoders are connected to this input channel"/>
</CV>
<CV Number="42" Type="Byte" Min="1" Max="200" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Störungsunterdrückung" Help="So lange muß das Eingangssignal mind. über der Schwelle sein. Einheit 1ms"/>
<Description Lang="en-EN" Text="Spike Suppression" Help="Required time for input above threshold, unit 1ms"/>
</CV>
<CV Number="43" Type="Bit" Min="2" Max="100" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Memory (Einheit 100ms)" Help="Haltezeit des Melders, so lange bleibt er mind. an"/>
<Description Lang="en-EN" Text="Memory (Unit 100ms" Help="Hodltime"/>
</CV>
<CV Number="44" Type="Byte" Min="4" Max="100" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Ansprechschwelle (DCC an)" Help="Einheit 0,5mV; 12: erkennt 40kOhm, 24: erkennt 20kOhm"/>
<Description Lang="en-EN" Text="Threshold (DCC on)" Help="unit 0.5mV; 12: detects 40kOhm; 24: detects 20kOhm"/>
</CV>
<CV Number="45" Type="Byte" Min="2" Max="50" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Ansprechschwelle (DCC aus)" Help="Einheit 0,5mV; empfohlen: etwas halber Wert wie bei DCC an"/>
<Description Lang="en-EN" Text="Threshold (DCC off)" Help="unit 0.5mV; recommended: half the value of DCC on"/>
</CV>
<CV Number="70" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kalibrierung gültig" Help="0=ungültig, 1=ungültig, auch Backup löschen"/>
<Description Lang="en-EN" Text="Adjustment valid" Help="0=void, 1=void, also delete backup"/>
</CV>
</Template>
<Template Name="Reverser">
<CV Number="1" Type="Int" Min="-" Max="-" Low="1" High="9" Values="-" Mode="rw">
<Description Lang="de-DE" Text="DCC Adr. (low)"/>
<Description Lang="en-EN" Text="DCC Addr. (low)"/>
</CV>
<CV Number="9" Type="Int" Min="-" Max="-" Low="1" High="9" Values="-" Mode="rw">
<Description Lang="de-DE" Text="DCC Adr. (high)"/>
<Description Lang="en-EN" Text="DCC Addr. (high)"/>
</CV>
<CV Number="51" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Kehrschleife aktuelle Stellung"/>
<Description Lang="en-EN" Text="Reverser Current Position"/>
</CV>
<CV Number="46" Type="GBM16TReverser" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kehrschleife Modus"/>
<Description Lang="en-EN" Text="Reverser Mode"/>
</CV>
<CV Number="47" Type="GBM16TReverser" Min="0" Max="255" Low="47" High="48" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kehrschleife On Low"/>
<Description Lang="en-EN" Text="Reverser On Low"/>
</CV>
<CV Number="48" Type="GBM16TReverser" Min="0" Max="255" Low="47" High="48" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kehrschleife On High"/>
<Description Lang="en-EN" Text="Reverser On High"/>
</CV>
<CV Number="49" Type="GBM16TReverser" Min="0" Max="255" Low="49" High="50" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kehrschleife Off Low"/>
<Description Lang="en-EN" Text="Reverser Off Low"/>
</CV>
<CV Number="50" Type="GBM16TReverser" Min="0" Max="255" Low="49" High="50" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kehrschleife Off High"/>
<Description Lang="en-EN" Text="Reverser Off High"/>
</CV>
<CV Number="65" Type="GBM16TReverser" Min="0" Max="255" Low="65" High="66" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kehrschleife Prio Low"/>
<Description Lang="en-EN" Text="Reverser Prio Low"/>
</CV>
<CV Number="66" Type="GBM16TReverser" Min="0" Max="255" Low="65" High="66" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Kehrschleife Prio High"/>
<Description Lang="en-EN" Text="Reverser Prio High"/>
</CV>
</Template>
<Template Name="Inhibit">
<CV Number="61" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Inhibit On, aktueller Zustand"/>
<Description Lang="en-EN" Text="Inhibit On, current state"/>
</CV>
<CV Number="59" Type="DCC_ADDR_RG" Min="0" Max="255" Low="59" High="60" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Inhibit On, Addr (Low)"/>
<Description Lang="en-EN" Text="Inhibit On, Addr (Low)"/>
</CV>
<CV Number="60" Type="DCC_ADDR_RG" Min="0" Max="255" Low="59" High="60" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Inhibit On, Addr (High)"/>
<Description Lang="en-EN" Text="Inhibit On, Addr (High)"/>
</CV>
<CV Number="64" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="ro">
<Description Lang="de-DE" Text="Inhibit Off, aktueller Zustand"/>
<Description Lang="en-EN" Text="Inhibit Off, current state"/>
</CV>
<CV Number="62" Type="DCC_ADDR_RG" Min="0" Max="255" Low="62" High="63" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Inhibit Off, Addr (Low)"/>
<Description Lang="en-EN" Text="Inhibit Off, Addr (Low)"/>
</CV>
<CV Number="63" Type="DCC_ADDR_RG" Min="0" Max="255" Low="62" High="63" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Inhibit Off, Addr (High)"/>
<Description Lang="en-EN" Text="Inhibit Off, Addr (High)"/>
</CV>
</Template>
<Template Name="Speed">
<CV Number="52" Type="Byte" Min="0" Max="255" Low="-" High="-" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Maßstab"/>
<Description Lang="en-EN" Text="Scale"/>
</CV>
<CV Number="53" Type="Int" Min="0" Max="255" Low="53" High="54" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Länge [mm] (low)"/>
<Description Lang="en-EN" Text="Length [mm] (low)"/>
</CV>
<CV Number="54" Type="Int" Min="0" Max="255" Low="53" High="54" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Länge [mm] (high)"/>
<Description Lang="en-EN" Text="Length [mm] (high)"/>
</CV>
<CV Number="55" Type="Int" Min="0" Max="255" Low="55" High="56" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Startmelder (low)"/>
<Description Lang="en-EN" Text="Start detector (low)"/>
</CV>
<CV Number="56" Type="Int" Min="0" Max="255" Low="55" High="56" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Startmelder (high)"/>
<Description Lang="en-EN" Text="Start detector (high)"/>
</CV>
<CV Number="57" Type="Int" Min="0" Max="255" Low="57" High="58" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Stopmelder (low)"/>
<Description Lang="en-EN" Text="Stop detector (low)"/>
</CV>
<CV Number="58" Type="Int" Min="0" Max="255" Low="57" High="58" Values="-" Mode="rw">
<Description Lang="de-DE" Text="Stopmelder (high)"/>
<Description Lang="en-EN" Text="Stop detector (high)"/>
</CV>
</Template>
</Templates>
<CVDefinition>
<Node Offset="104" Template="About">
<Nodetext Lang="de-DE" Text="Allgemeine Daten"/>
<Nodetext Lang="en-EN" Text="Common data"/>
</Node>
<Node>
<Nodetext Lang="de-DE" Text="HERMES"/>
<Nodetext Lang="en-EN" Text="HERMES"/>
<Node Offset="0" Template="GBM16T" Count="1" Next="10000">
<Nodetext Lang="de-DE" Text="Para"/>
<Nodetext Lang="en-EN" Text="Para"/>
</Node>
</Node>
</CVDefinition>
</VendorCV>
© 2015 - 2024 Weber Informatics LLC | Privacy Policy