org.codelibs.elasticsearch.common.io.Channels Maven / Gradle / Ivy
/*
* Licensed to Elasticsearch under one or more contributor
* license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright
* ownership. Elasticsearch licenses this file to you under
* the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
package org.codelibs.elasticsearch.common.io;
import java.io.EOFException;
import java.io.IOException;
import java.nio.ByteBuffer;
import java.nio.channels.FileChannel;
import java.nio.channels.WritableByteChannel;
public final class Channels {
private Channels() {
}
/**
* The maximum chunk size for reads in bytes
*/
private static final int READ_CHUNK_SIZE = 16384;
/**
* The maximum chunk size for writes in bytes
*/
private static final int WRITE_CHUNK_SIZE = 8192;
/**
* read length bytes from position of a file channel
*/
public static byte[] readFromFileChannel(FileChannel channel, long position, int length) throws IOException {
byte[] res = new byte[length];
readFromFileChannelWithEofException(channel, position, res, 0, length);
return res;
}
/**
* read length bytes from position of a file channel. An EOFException will be thrown if you
* attempt to read beyond the end of file.
*
* @param channel channel to read from
* @param channelPosition position to read from
* @param dest destination byte array to put data in
* @param destOffset offset in dest to read into
* @param length number of bytes to read
*/
public static void readFromFileChannelWithEofException(FileChannel channel, long channelPosition, byte[] dest, int destOffset, int length) throws IOException {
int read = readFromFileChannel(channel, channelPosition, dest, destOffset, length);
if (read < 0) {
throw new EOFException("read past EOF. pos [" + channelPosition + "] length: [" + length + "] end: [" + channel.size() + "]");
}
}
/**
* read length bytes from position of a file channel.
*
* @param channel channel to read from
* @param channelPosition position to read from
* @param dest destination byte array to put data in
* @param destOffset offset in dest to read into
* @param length number of bytes to read
* @return total bytes read or -1 if an attempt was made to read past EOF. The method always tries to read all the bytes
* that will fit in the destination byte buffer.
*/
public static int readFromFileChannel(FileChannel channel, long channelPosition, byte[] dest, int destOffset, int length) throws IOException {
ByteBuffer buffer = ByteBuffer.wrap(dest, destOffset, length);
return readFromFileChannel(channel, channelPosition, buffer);
}
/**
* read from a file channel into a byte buffer, starting at a certain position. An EOFException will be thrown if you
* attempt to read beyond the end of file.
*
* @param channel channel to read from
* @param channelPosition position to read from
* @param dest destination {java.nio.ByteBuffer} to put data in
*/
public static void readFromFileChannelWithEofException(FileChannel channel, long channelPosition, ByteBuffer dest) throws IOException {
int read = readFromFileChannel(channel, channelPosition, dest);
if (read < 0) {
throw new EOFException("read past EOF. pos [" + channelPosition + "] length: [" + dest.limit() + "] end: [" + channel.size() + "]");
}
}
/**
* read from a file channel into a byte buffer, starting at a certain position.
*
* @param channel channel to read from
* @param channelPosition position to read from
* @param dest destination {java.nio.ByteBuffer} to put data in
* @return total bytes read or -1 if an attempt was made to read past EOF. The method always tries to read all the bytes
* that will fit in the destination byte buffer.
*/
public static int readFromFileChannel(FileChannel channel, long channelPosition, ByteBuffer dest) throws IOException {
if (dest.isDirect() || (dest.remaining() < READ_CHUNK_SIZE)) {
return readSingleChunk(channel, channelPosition, dest);
} else {
int bytesRead = 0;
int bytesToRead = dest.remaining();
// duplicate the buffer in order to be able to change the limit
ByteBuffer tmpBuffer = dest.duplicate();
try {
while (dest.hasRemaining()) {
tmpBuffer.limit(Math.min(dest.limit(), tmpBuffer.position() + READ_CHUNK_SIZE));
int read = readSingleChunk(channel, channelPosition, tmpBuffer);
if (read < 0) {
return read;
}
bytesRead += read;
channelPosition += read;
dest.position(tmpBuffer.position());
}
} finally {
// make sure we update byteBuffer to indicate how far we came..
dest.position(tmpBuffer.position());
}
assert bytesRead == bytesToRead : "failed to read an entire buffer but also didn't get an EOF (read [" + bytesRead + "] needed [" + bytesToRead + "]";
return bytesRead;
}
}
private static int readSingleChunk(FileChannel channel, long channelPosition, ByteBuffer dest) throws IOException {
int bytesRead = 0;
while (dest.hasRemaining()) {
int read = channel.read(dest, channelPosition);
if (read < 0) {
return read;
}
assert read > 0 : "FileChannel.read with non zero-length bb.remaining() must always read at least one byte (FileChannel is in blocking mode, see spec of ReadableByteChannel)";
bytesRead += read;
channelPosition += read;
}
return bytesRead;
}
/**
* Writes part of a byte array to a {java.nio.channels.WritableByteChannel}
*
* @param source byte array to copy from
* @param channel target WritableByteChannel
*/
public static void writeToChannel(byte[] source, WritableByteChannel channel) throws IOException {
writeToChannel(source, 0, source.length, channel);
}
/**
* Writes part of a byte array to a {java.nio.channels.WritableByteChannel}
*
* @param source byte array to copy from
* @param offset start copying from this offset
* @param length how many bytes to copy
* @param channel target WritableByteChannel
*/
public static void writeToChannel(byte[] source, int offset, int length, WritableByteChannel channel) throws IOException {
int toWrite = Math.min(length, WRITE_CHUNK_SIZE);
ByteBuffer buffer = ByteBuffer.wrap(source, offset, toWrite);
int written = channel.write(buffer);
length -= written;
while (length > 0) {
toWrite = Math.min(length, WRITE_CHUNK_SIZE);
buffer.limit(buffer.position() + toWrite);
written = channel.write(buffer);
length -= written;
}
assert length == 0 : "wrote more then expected bytes (length=" + length + ")";
}
/**
* Writes a {java.nio.ByteBuffer} to a {java.nio.channels.WritableByteChannel}
*
* @param byteBuffer source buffer
* @param channel channel to write to
*/
public static void writeToChannel(ByteBuffer byteBuffer, WritableByteChannel channel) throws IOException {
if (byteBuffer.isDirect() || (byteBuffer.remaining() <= WRITE_CHUNK_SIZE)) {
while (byteBuffer.hasRemaining()) {
channel.write(byteBuffer);
}
} else {
// duplicate the buffer in order to be able to change the limit
ByteBuffer tmpBuffer = byteBuffer.duplicate();
try {
while (byteBuffer.hasRemaining()) {
tmpBuffer.limit(Math.min(byteBuffer.limit(), tmpBuffer.position() + WRITE_CHUNK_SIZE));
while (tmpBuffer.hasRemaining()) {
channel.write(tmpBuffer);
}
byteBuffer.position(tmpBuffer.position());
}
} finally {
// make sure we update byteBuffer to indicate how far we came..
byteBuffer.position(tmpBuffer.position());
}
}
}
}
© 2015 - 2024 Weber Informatics LLC | Privacy Policy