org.elasticsearch.hadoop.util.FastByteArrayInputStream Maven / Gradle / Ivy
/*
* Licensed to Elasticsearch under one or more contributor
* license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright
* ownership. Elasticsearch licenses this file to you under
* the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
package org.elasticsearch.hadoop.util;
/*
* This file is derived from org.elasticsearch.common.io.FastByteArrayInputStream.
* All copyrights apply.
* License header for that code follows:
*/
/*
* Licensed to Elasticsearch under one or more contributor
* license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright
* ownership. Elasticsearch licenses this file to you under
* the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
import java.io.InputStream;
/**
* Taken from Elasticsearch - copy of org.elasticsearch.common.io.FastByteArrayInputStream with some enhancements,
* mainly in allowing access to the underlying byte[] and in respecting slicing of an underlying BytesArray.
*
* Similar to {@link java.io.ByteArrayInputStream} just not synced.
*/
public class FastByteArrayInputStream extends InputStream {
/**
* An array of bytes that was provided
* by the creator of the stream. Elements buf[0]
* through buf[count-1] are the
* only bytes that can ever be read from the
* stream; element buf[pos] is
* the next byte to be read.
*/
protected BytesArray data;
/**
* The initial starting place of the array buffer passed in to this
* input stream.
*/
protected int offset;
/**
* The index of the next character to read from the input stream buffer.
* This value should always be nonnegative
* and not larger than the value of count.
* The next byte to be read from the input stream buffer
* will be buf[pos].
*/
protected int pos;
/**
* The currently marked position in the stream.
* ByteArrayInputStream objects are marked at position zero by
* default when constructed. They may be marked at another
* position within the buffer by the mark() method.
* The current buffer position is set to this point by the
* reset() method.
*
* If no mark has been set, then the value of mark is the offset
* passed to the constructor (or 0 if the offset was not supplied).
*
* @since JDK1.1
*/
protected int mark = 0;
/**
* The index one greater than the last valid character in the input
* stream buffer.
* This value should always be nonnegative
* and not larger than the length of buf.
* It is one greater than the position of
* the last byte within buf that
* can ever be read from the input stream buffer.
*/
protected int count;
public FastByteArrayInputStream(byte[] data) {
this(new BytesArray(data));
}
/**
* Creates a ByteArrayInputStream
* so that it uses data as its
* buffer array.
* The buffer array is not copied.
* The initial value of pos
* is set to the bytes array's offset and the
* initial value of count is the
* logical size of the bytes array.
*
* @param data the input buffer.
*/
public FastByteArrayInputStream(BytesArray data) {
this.data = data;
this.pos = data.offset;
this.offset = data.offset;
this.count = data.offset + data.size;
}
/**
* Reads the next byte of data from this input stream. The value
* byte is returned as an int in the range
* 0 to 255. If no byte is available
* because the end of the stream has been reached, the value
* -1 is returned.
*
* This read method
* cannot block.
*
* @return the next byte of data, or -1 if the end of the
* stream has been reached.
*/
public int read() {
return (pos < count) ? (data.bytes[pos++] & 0xff) : -1;
}
/**
* Reads up to len bytes of data into an array of bytes
* from this input stream.
* If pos equals count,
* then -1 is returned to indicate
* end of file. Otherwise, the number k
* of bytes read is equal to the smaller of
* len and count-pos.
* If k is positive, then bytes
* buf[pos] through buf[pos+k-1]
* are copied into b[off] through
* b[off+k-1] in the manner performed
* by System.arraycopy. The
* value k is added into pos
* and k is returned.
*
* This read method cannot block.
*
* @param b the buffer into which the data is read.
* @param off the start offset in the destination array b
* @param len the maximum number of bytes read.
* @return the total number of bytes read into the buffer, or
* -1 if there is no more data because the end of
* the stream has been reached.
* @throws NullPointerException If b is null.
* @throws IndexOutOfBoundsException If off is negative,
* len is negative, or len is greater than
* b.length - off
*/
public int read(byte b[], int off, int len) {
if (b == null) {
throw new NullPointerException();
}
else if (off < 0 || len < 0 || len > b.length - off) {
throw new IndexOutOfBoundsException();
}
if (pos >= count) {
return -1;
}
if (pos + len > count) {
len = count - pos;
}
if (len <= 0) {
return 0;
}
System.arraycopy(data.bytes, pos, b, off, len);
pos += len;
return len;
}
/**
* Skips n bytes of input from this input stream. Fewer
* bytes might be skipped if the end of the input stream is reached.
* The actual number k
* of bytes to be skipped is equal to the smaller
* of n and count-pos.
* The value k is added into pos
* and k is returned.
*
* @param n the number of bytes to be skipped.
* @return the actual number of bytes skipped.
*/
public long skip(long n) {
if (pos + n > count) {
n = count - pos;
}
if (n < 0) {
return 0;
}
pos += n;
return n;
}
/**
* Returns the number of remaining bytes that can be read (or skipped over)
* from this input stream.
*
* The value returned is count - pos,
* which is the number of bytes remaining to be read from the input buffer.
*
* @return the number of remaining bytes that can be read (or skipped
* over) from this input stream without blocking.
*/
public int available() {
return count - pos;
}
/**
* @return the relative position of the stream in regards to the underlying buffer.
*/
public int position() {
return pos - offset;
}
/**
* Tests if this InputStream supports mark/reset. The
* markSupported method of ByteArrayInputStream
* always returns true.
*
* @since JDK1.1
*/
public boolean markSupported() {
return true;
}
/**
* Set the current marked position in the stream.
* ByteArrayInputStream objects are marked at position zero by
* default when constructed. They may be marked at another
* position within the buffer by this method.
*
* If no mark has been set, then the value of the mark is the
* offset passed to the constructor (or 0 if the offset was not
* supplied).
*
* Note: The readAheadLimit for this class
* has no meaning.
*
* @since JDK1.1
*/
public void mark(int readAheadLimit) {
mark = pos;
}
/**
* Resets the buffer to the marked position. The marked position
* is 0 unless another position was marked or an offset was specified
* in the constructor.
*/
public void reset() {
pos = mark;
}
/**
* Closing a ByteArrayInputStream has no effect. The methods in
* this class can be called after the stream has been closed without
* generating an IOException.
*
*/
public void close() {}
public BytesArray bytes() {
return data;
}
public void setBytes(byte[] data, int size) {
this.data.bytes(data, size);
}
}© 2015 - 2024 Weber Informatics LLC | Privacy Policy