org.elasticsearch.rest.RestStatus Maven / Gradle / Ivy
/*
* Licensed to ElasticSearch and Shay Banon under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. ElasticSearch licenses this
* file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
package org.elasticsearch.rest;
import org.elasticsearch.common.io.stream.StreamInput;
import org.elasticsearch.common.io.stream.StreamOutput;
import java.io.IOException;
public enum RestStatus {
/**
* The client SHOULD continue with its request. This interim response is used to inform the client that the
* initial part of the request has been received and has not yet been rejected by the server. The client
* SHOULD continue by sending the remainder of the request or, if the request has already been completed,
* ignore this response. The server MUST send a final response after the request has been completed.
*/
CONTINUE(100),
/**
* The server understands and is willing to comply with the client's request, via the Upgrade message header field
* (section 14.42), for a change in the application protocol being used on this connection. The server will
* switch protocols to those defined by the response's Upgrade header field immediately after the empty line
* which terminates the 101 response.
*/
SWITCHING_PROTOCOLS(101),
/**
* The request has succeeded. The information returned with the response is dependent on the method
* used in the request, for example:
*
* - GET: an entity corresponding to the requested resource is sent in the response;
* - HEAD: the entity-header fields corresponding to the requested resource are sent in the response without any message-body;
* - POST: an entity describing or containing the result of the action;
* - TRACE: an entity containing the request message as received by the end server.
*
*/
OK(200),
/**
* The request has been fulfilled and resulted in a new resource being created. The newly created resource can
* be referenced by the URI(s) returned in the entity of the response, with the most specific URI for the
* resource given by a Location header field. The response SHOULD include an entity containing a list of resource
* characteristics and location(s) from which the user or user agent can choose the one most appropriate. The
* entity format is specified by the media type given in the Content-Type header field. The origin server MUST
* create the resource before returning the 201 status code. If the action cannot be carried out immediately, the
* server SHOULD respond with 202 (Accepted) response instead.
*
* A 201 response MAY contain an ETag response header field indicating the current value of the entity tag
* for the requested variant just created, see section 14.19.
*/
CREATED(201),
/**
* The request has been accepted for processing, but the processing has not been completed. The request might
* or might not eventually be acted upon, as it might be disallowed when processing actually takes place. There
* is no facility for re-sending a status code from an asynchronous operation such as this.
*
* The 202 response is intentionally non-committal. Its purpose is to allow a server to accept a request for
* some other process (perhaps a batch-oriented process that is only run once per day) without requiring that
* the user agent's connection to the server persist until the process is completed. The entity returned with
* this response SHOULD include an indication of the request's current status and either a pointer to a status
* monitor or some estimate of when the user can expect the request to be fulfilled.
*/
ACCEPTED(202),
/**
* The returned meta information in the entity-header is not the definitive set as available from the origin
* server, but is gathered from a local or a third-party copy. The set presented MAY be a subset or super set
* of the original version. For example, including local annotation information about the resource might
* result in a super set of the meta information known by the origin server. Use of this response code
* is not required and is only appropriate when the response would otherwise be 200 (OK).
*/
NON_AUTHORITATIVE_INFORMATION(203),
/**
* The server has fulfilled the request but does not need to return an entity-body, and might want to return
* updated meta information. The response MAY include new or updated meta information in the form of
* entity-headers, which if present SHOULD be associated with the requested variant.
*
* If the client is a user agent, it SHOULD NOT change its document view from that which caused the request
* to be sent. This response is primarily intended to allow input for actions to take place without causing a
* change to the user agent's active document view, although any new or updated meta information SHOULD be
* applied to the document currently in the user agent's active view.
*
* The 204 response MUST NOT include a message-body, and thus is always terminated by the first empty
* line after the header fields.
*/
NO_CONTENT(204),
/**
* The server has fulfilled the request and the user agent SHOULD reset the document view which caused the
* request to be sent. This response is primarily intended to allow input for actions to take place via user
* input, followed by a clearing of the form in which the input is given so that the user can easily initiate
* another input action. The response MUST NOT include an entity.
*/
RESET_CONTENT(205),
/**
* The server has fulfilled the partial GET request for the resource. The request MUST have included a Range
* header field (section 14.35) indicating the desired range, and MAY have included an If-Range header
* field (section 14.27) to make the request conditional.
*
* The response MUST include the following header fields:
*
* - Either a Content-Range header field (section 14.16) indicating the range included with this response,
* or a multipart/byteranges Content-Type including Content-Range fields for each part. If a Content-Length
* header field is present in the response, its value MUST match the actual number of OCTETs transmitted in
* the message-body.
* - Date
* - ETag and/or Content-Location, if the header would have been sent in a 200 response to the same request
* - Expires, Cache-Control, and/or Vary, if the field-value might differ from that sent in any previous
* response for the same variant
*
*
* If the 206 response is the result of an If-Range request that used a strong cache validator
* (see section 13.3.3), the response SHOULD NOT include other entity-headers. If the response is the result
* of an If-Range request that used a weak validator, the response MUST NOT include other entity-headers;
* this prevents inconsistencies between cached entity-bodies and updated headers. Otherwise, the response MUST
* include all of the entity-headers that would have been returned with a 200 (OK) response to the same request.
*
* A cache MUST NOT combine a 206 response with other previously cached content if the ETag or Last-Modified
* headers do not match exactly, see 13.5.4.
*
* A cache that does not support the Range and Content-Range headers MUST NOT cache 206 (Partial) responses.
*/
PARTIAL_CONTENT(206),
/**
* The 207 (Multi-Status) status code provides status for multiple independent operations (see Section 13 for
* more information).
*
* A Multi-Status response conveys information about multiple resources in situations where multiple status
* codes might be appropriate. The default Multi-Status response body is a text/xml or application/xml HTTP
* entity with a 'multistatus' root element. Further elements contain 200, 300, 400, and 500 series status codes
* generated during the method invocation. 100 series status codes SHOULD NOT be recorded in a 'response'
* XML element.
*
* Although '207' is used as the overall response status code, the recipient needs to consult the contents
* of the multistatus response body for further information about the success or failure of the method execution.
* The response MAY be used in success, partial success and also in failure situations.
*
* The 'multistatus' root element holds zero or more 'response' elements in any order, each with
* information about an individual resource. Each 'response' element MUST have an 'href' element
* to identify the resource.
*/
MULTI_STATUS(207),
/**
* The requested resource corresponds to any one of a set of representations, each with its own specific
* location, and agent-driven negotiation information (section 12) is being provided so that the user (or user
* agent) can select a preferred representation and redirect its request to that location.
*
* Unless it was a HEAD request, the response SHOULD include an entity containing a list of resource
* characteristics and location(s) from which the user or user agent can choose the one most appropriate.
* The entity format is specified by the media type given in the Content-Type header field. Depending upon the
* format and the capabilities of the user agent, selection of the most appropriate choice MAY be performed
* automatically. However, this specification does not define any standard for such automatic selection.
*
* If the server has a preferred choice of representation, it SHOULD include the specific URI for that
* representation in the Location field; user agents MAY use the Location field value for automatic redirection.
* This response is cacheable unless indicated otherwise.
*/
MULTIPLE_CHOICES(300),
/**
* The requested resource has been assigned a new permanent URI and any future references to this resource
* SHOULD use one of the returned URIs. Clients with link editing capabilities ought to automatically re-link
* references to the Request-URI to one or more of the new references returned by the server, where possible.
* This response is cacheable unless indicated otherwise.
*
* The new permanent URI SHOULD be given by the Location field in the response. Unless the request method
* was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s).
*
* If the 301 status code is received in response to a request other than GET or HEAD, the user agent
* MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change
* the conditions under which the request was issued.
*/
MOVED_PERMANENTLY(301),
/**
* The requested resource resides temporarily under a different URI. Since the redirection might be altered on
* occasion, the client SHOULD continue to use the Request-URI for future requests. This response is only
* cacheable if indicated by a Cache-Control or Expires header field.
*
* The temporary URI SHOULD be given by the Location field in the response. Unless the request method was
* HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s).
*
* If the 302 status code is received in response to a request other than GET or HEAD, the user agent
* MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change
* the conditions under which the request was issued.
*/
FOUND(302),
/**
* The response to the request can be found under a different URI and SHOULD be retrieved using a GET method on
* that resource. This method exists primarily to allow the output of a POST-activated script to redirect the
* user agent to a selected resource. The new URI is not a substitute reference for the originally requested
* resource. The 303 response MUST NOT be cached, but the response to the second (redirected) request might be
* cacheable.
*
* The different URI SHOULD be given by the Location field in the response. Unless the request method was
* HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s).
*/
SEE_OTHER(303),
/**
* If the client has performed a conditional GET request and access is allowed, but the document has not been
* modified, the server SHOULD respond with this status code. The 304 response MUST NOT contain a message-body,
* and thus is always terminated by the first empty line after the header fields.
*
* The response MUST include the following header fields:
*
* - Date, unless its omission is required by section 14.18.1
* If a clockless origin server obeys these rules, and proxies and clients add their own Date to any
* response received without one (as already specified by [RFC 2068], section 14.19), caches will operate
* correctly.
*
* - ETag and/or Content-Location, if the header would have been sent in a 200 response to the same request
* - Expires, Cache-Control, and/or Vary, if the field-value might differ from that sent in any previous
* response for the same variant
*
*
* If the conditional GET used a strong cache validator (see section 13.3.3), the response SHOULD NOT include
* other entity-headers. Otherwise (i.e., the conditional GET used a weak validator), the response MUST NOT
* include other entity-headers; this prevents inconsistencies between cached entity-bodies and updated headers.
*
* If a 304 response indicates an entity not currently cached, then the cache MUST disregard the response
* and repeat the request without the conditional.
*
* If a cache uses a received 304 response to update a cache entry, the cache MUST update the entry to
* reflect any new field values given in the response.
*/
NOT_MODIFIED(304),
/**
* The requested resource MUST be accessed through the proxy given by the Location field. The Location field
* gives the URI of the proxy. The recipient is expected to repeat this single request via the proxy.
* 305 responses MUST only be generated by origin servers.
*/
USE_PROXY(305),
/**
* The requested resource resides temporarily under a different URI. Since the redirection MAY be altered on
* occasion, the client SHOULD continue to use the Request-URI for future requests. This response is only
* cacheable if indicated by a Cache-Control or Expires header field.
*
* The temporary URI SHOULD be given by the Location field in the response. Unless the request method was
* HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s) ,
* since many pre-HTTP/1.1 user agents do not understand the 307 status. Therefore, the note SHOULD contain
* the information necessary for a user to repeat the original request on the new URI.
*
* If the 307 status code is received in response to a request other than GET or HEAD, the user agent MUST NOT
* automatically redirect the request unless it can be confirmed by the user, since this might change the
* conditions under which the request was issued.
*/
TEMPORARY_REDIRECT(307),
/**
* The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the
* request without modifications.
*/
BAD_REQUEST(400),
/**
* The request requires user authentication. The response MUST include a WWW-Authenticate header field
* (section 14.47) containing a challenge applicable to the requested resource. The client MAY repeat the request
* with a suitable Authorization header field (section 14.8). If the request already included Authorization
* credentials, then the 401 response indicates that authorization has been refused for those credentials.
* If the 401 response contains the same challenge as the prior response, and the user agent has already attempted
* authentication at least once, then the user SHOULD be presented the entity that was given in the response,
* since that entity might include relevant diagnostic information. HTTP access authentication is explained in
* "HTTP Authentication: Basic and Digest Access Authentication" [43].
*/
UNAUTHORIZED(401),
/**
* This code is reserved for future use.
*/
PAYMENT_REQUIRED(402),
/**
* The server understood the request, but is refusing to fulfill it. Authorization will not help and the request
* SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the
* request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server
* does not wish to make this information available to the client, the status code 404 (Not Found) can be used
* instead.
*/
FORBIDDEN(403),
/**
* The server has not found anything matching the Request-URI. No indication is given of whether the condition
* is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some
* internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding
* address. This status code is commonly used when the server does not wish to reveal exactly why the request
* has been refused, or when no other response is applicable.
*/
NOT_FOUND(404),
/**
* The method specified in the Request-Line is not allowed for the resource identified by the Request-URI.
* The response MUST include an Allow header containing a list of valid methods for the requested resource.
*/
METHOD_NOT_ALLOWED(405),
/**
* The resource identified by the request is only capable of generating response entities which have content
* characteristics not acceptable according to the accept headers sent in the request.
*
* Unless it was a HEAD request, the response SHOULD include an entity containing a list of available entity
* characteristics and location(s) from which the user or user agent can choose the one most appropriate.
* The entity format is specified by the media type given in the Content-Type header field. Depending upon the
* format and the capabilities of the user agent, selection of the most appropriate choice MAY be performed
* automatically. However, this specification does not define any standard for such automatic selection.
*
* Note: HTTP/1.1 servers are allowed to return responses which are not acceptable according to the accept
* headers sent in the request. In some cases, this may even be preferable to sending a 406 response. User
* agents are encouraged to inspect the headers of an incoming response to determine if it is acceptable.
*
* If the response could be unacceptable, a user agent SHOULD temporarily stop receipt of more data and query
* the user for a decision on further actions.
*/
NOT_ACCEPTABLE(406),
/**
* This code is similar to 401 (Unauthorized), but indicates that the client must first authenticate itself with
* the proxy. The proxy MUST return a Proxy-Authenticate header field (section 14.33) containing a challenge
* applicable to the proxy for the requested resource. The client MAY repeat the request with a suitable
* Proxy-Authorization header field (section 14.34). HTTP access authentication is explained in
* "HTTP Authentication: Basic and Digest Access Authentication" [43].
*/
PROXY_AUTHENTICATION(407),
/**
* The client did not produce a request within the time that the server was prepared to wait. The client MAY
* repeat the request without modifications at any later time.
*/
REQUEST_TIMEOUT(408),
/**
* The request could not be completed due to a conflict with the current state of the resource. This code is
* only allowed in situations where it is expected that the user might be able to resolve the conflict and
* resubmit the request. The response body SHOULD include enough information for the user to recognize the
* source of the conflict. Ideally, the response entity would include enough information for the user or user
* agent to fix the problem; however, that might not be possible and is not required.
*
* Conflicts are most likely to occur in response to a PUT request. For example, if versioning were being
* used and the entity being PUT included changes to a resource which conflict with those made by an earlier
* (third-party) request, the server might use the 409 response to indicate that it can't complete the request.
* In this case, the response entity would likely contain a list of the differences between the two versions in
* a format defined by the response Content-Type.
*/
CONFLICT(409),
/**
* The requested resource is no longer available at the server and no forwarding address is known. This condition
* is expected to be considered permanent. Clients with link editing capabilities SHOULD delete references to
* the Request-URI after user approval. If the server does not know, or has no facility to determine, whether or
* not the condition is permanent, the status code 404 (Not Found) SHOULD be used instead. This response is
* cacheable unless indicated otherwise.
*
* The 410 response is primarily intended to assist the task of web maintenance by notifying the recipient
* that the resource is intentionally unavailable and that the server owners desire that remote links to that
* resource be removed. Such an event is common for limited-time, promotional services and for resources belonging
* to individuals no longer working at the server's site. It is not necessary to mark all permanently unavailable
* resources as "gone" or to keep the mark for any length of time -- that is left to the discretion of the server
* owner.
*/
GONE(410),
/**
* The server refuses to accept the request without a defined Content-Length. The client MAY repeat the request
* if it adds a valid Content-Length header field containing the length of the message-body in the request message.
*/
LENGTH_REQUIRED(411),
/**
* The precondition given in one or more of the request-header fields evaluated to false when it was tested on
* the server. This response code allows the client to place preconditions on the current resource metainformation
* (header field data) and thus prevent the requested method from being applied to a resource other than the one
* intended.
*/
PRECONDITION_FAILED(412),
/**
* The server is refusing to process a request because the request entity is larger than the server is willing
* or able to process. The server MAY close the connection to prevent the client from continuing the request.
*
* If the condition is temporary, the server SHOULD include a Retry-After header field to indicate that it
* is temporary and after what time the client MAY try again.
*/
REQUEST_ENTITY_TOO_LARGE(413),
/**
* The server is refusing to service the request because the Request-URI is longer than the server is willing
* to interpret. This rare condition is only likely to occur when a client has improperly converted a POST
* request to a GET request with long query information, when the client has descended into a URI "black hole"
* of redirection (e.g., a redirected URI prefix that points to a suffix of itself), or when the server is
* under attack by a client attempting to exploit security holes present in some servers using fixed-length
* buffers for reading or manipulating the Request-URI.
*/
REQUEST_URI_TOO_LONG(414),
/**
* The server is refusing to service the request because the entity of the request is in a format not supported
* by the requested resource for the requested method.
*/
UNSUPPORTED_MEDIA_TYPE(415),
/**
* A server SHOULD return a response with this status code if a request included a Range request-header field
* (section 14.35), and none of the range-specifier values in this field overlap the current extent of the
* selected resource, and the request did not include an If-Range request-header field. (For byte-ranges, this
* means that the first-byte-pos of all of the byte-range-spec values were greater than the current length of
* the selected resource.)
*
* When this status code is returned for a byte-range request, the response SHOULD include a Content-Range
* entity-header field specifying the current length of the selected resource (see section 14.16). This
* response MUST NOT use the multipart/byteranges content-type.
*/
REQUESTED_RANGE_NOT_SATISFIED(416),
/**
* The expectation given in an Expect request-header field (see section 14.20) could not be met by this server,
* or, if the server is a proxy, the server has unambiguous evidence that the request could not be met by the
* next-hop server.
*/
EXPECTATION_FAILED(417),
/**
* The 422 (Unprocessable Entity) status code means the server understands the content type of the request
* entity (hence a 415(Unsupported Media Type) status code is inappropriate), and the syntax of the request
* entity is correct (thus a 400 (Bad Request) status code is inappropriate) but was unable to process the
* contained instructions. For example, this error condition may occur if an XML request body contains
* well-formed (i.e., syntactically correct), but semantically erroneous, XML instructions.
*/
UNPROCESSABLE_ENTITY(422),
/**
* The 423 (Locked) status code means the source or destination resource of a method is locked. This response
* SHOULD contain an appropriate precondition or postcondition code, such as 'lock-token-submitted' or
* 'no-conflicting-lock'.
*/
LOCKED(423),
/**
* The 424 (Failed Dependency) status code means that the method could not be performed on the resource because
* the requested action depended on another action and that action failed. For example, if a command in a
* PROPPATCH method fails, then, at minimum, the rest of the commands will also fail with 424 (Failed Dependency).
*/
FAILED_DEPENDENCY(424),
/**
* The server encountered an unexpected condition which prevented it from fulfilling the request.
*/
INTERNAL_SERVER_ERROR(500),
/**
* The server does not support the functionality required to fulfill the request. This is the appropriate
* response when the server does not recognize the request method and is not capable of supporting it for any
* resource.
*/
NOT_IMPLEMENTED(501),
/**
* The server, while acting as a gateway or proxy, received an invalid response from the upstream server it
* accessed in attempting to fulfill the request.
*/
BAD_GATEWAY(502),
/**
* The server is currently unable to handle the request due to a temporary overloading or maintenance of the
* server. The implication is that this is a temporary condition which will be alleviated after some delay.
* If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given,
* the client SHOULD handle the response as it would for a 500 response.
*/
SERVICE_UNAVAILABLE(503),
/**
* The server, while acting as a gateway or proxy, did not receive a timely response from the upstream server
* specified by the URI (e.g. HTTP, FTP, LDAP) or some other auxiliary server (e.g. DNS) it needed to access
* in attempting to complete the request.
*/
GATEWAY_TIMEOUT(504),
/**
* The server does not support, or refuses to support, the HTTP protocol version that was used in the request
* message. The server is indicating that it is unable or unwilling to complete the request using the same major
* version as the client, as described in section 3.1, other than with this error message. The response SHOULD
* contain an entity describing why that version is not supported and what other protocols are supported by
* that server.
*/
HTTP_VERSION_NOT_SUPPORTED(505),
/**
* The 507 (Insufficient Storage) status code means the method could not be performed on the resource because
* the server is unable to store the representation needed to successfully complete the request. This condition
* is considered to be temporary. If the request that received this status code was the result of a user action,
* the request MUST NOT be repeated until it is requested by a separate user action.
*/
INSUFFICIENT_STORAGE(506);
private int status;
RestStatus(int status) {
this.status = (short) status;
}
public int getStatus() {
return status;
}
public static RestStatus readFrom(StreamInput in) throws IOException {
return RestStatus.valueOf(in.readString());
}
public static void writeTo(StreamOutput out, RestStatus status) throws IOException {
out.writeString(status.name());
}
}