com.sun.enterprise.admin.cli.LocalStrings_zh_CN.properties Maven / Gradle / Ivy
The newest version!
#
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
#
# Copyright (c) 2011-2012 Oracle and/or its affiliates. All rights reserved.
#
# The contents of this file are subject to the terms of either the GNU
# General Public License Version 2 only ("GPL") or the Common Development
# and Distribution License("CDDL") (collectively, the "License"). You
# may not use this file except in compliance with the License. You can
# obtain a copy of the License at
# https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
# or packager/legal/LICENSE.txt. See the License for the specific
# language governing permissions and limitations under the License.
#
# When distributing the software, include this License Header Notice in each
# file and include the License file at packager/legal/LICENSE.txt.
#
# GPL Classpath Exception:
# Oracle designates this particular file as subject to the "Classpath"
# exception as provided by Oracle in the GPL Version 2 section of the License
# file that accompanied this code.
#
# Modifications:
# If applicable, add the following below the License Header, with the fields
# enclosed by brackets [] replaced by your own identifying information:
# "Portions Copyright [year] [name of copyright owner]"
#
# Contributor(s):
# If you wish your version of this file to be governed by only the CDDL or
# only the GPL Version 2, indicate your decision by adding "[Contributor]
# elects to include this software in this distribution under the [CDDL or GPL
# Version 2] license." If you don't indicate a single choice of license, a
# recipient has the option to distribute your version of this file under
# either the CDDL, the GPL Version 2 or to extend the choice of license to
# its licensees as provided above. However, if you add GPL Version 2 code
# and therefore, elected the GPL Version 2 license, then the option applies
# only if the new code is made subject to such option by the copyright
# holder.
#
#EN CommandSuccessful=Command {0} executed successfully.
CommandSuccessful=\u5DF2\u6210\u529F\u6267\u884C\u547D\u4EE4{0}\u3002
#EN CommandSuccessfulWithWarnings=Command {0} completed with warnings.
CommandSuccessfulWithWarnings=\u547D\u4EE4{0}\u5DF2\u5B8C\u6210, \u4F46\u51FA\u73B0\u8B66\u544A\u3002
#EN CommandUnSuccessful=Command {0} failed.
CommandUnSuccessful=\u547D\u4EE4{0}\u5931\u8D25\u3002
#EN CommandUnSuccessfulWithArg=Command {0} failed: {1}
CommandUnSuccessfulWithArg=\u547D\u4EE4{0}\u5931\u8D25: {1}
#EN ExtDirMissing=Warning: asadmin extension directory is missing: {0}
ExtDirMissing=\u8B66\u544A: asadmin \u6269\u5C55\u76EE\u5F55\u7F3A\u5931: {0}
#EN ExtDirFailed=Error loading asadmin extensions: {0}
ExtDirFailed=\u52A0\u8F7D asadmin \u6269\u5C55\u65F6\u51FA\u73B0\u9519\u8BEF: {0}
#EN DirError=Cannot read directory: {0}
DirError=\u65E0\u6CD5\u8BFB\u53D6\u76EE\u5F55: {0}
#EN DomainPasswordChanged=Master password changed for domain {0}
DomainPasswordChanged=\u5DF2\u66F4\u6539\u57DF{0}\u7684\u4E3B\u53E3\u4EE4
#EN DomainCreated=Domain {0} created.
DomainCreated=\u5DF2\u521B\u5EFA\u57DF{0}\u3002
#EN DomainDeleted=Domain {0} deleted.
DomainDeleted=\u5DF2\u5220\u9664\u57DF{0}\u3002
# Observe the hidden trailing space after prompt strings. Could be handled better ...
#EN AdminUserPrompt=Enter admin user name [Enter to accept default]>
AdminUserPrompt=\u8BF7\u8F93\u5165\u7BA1\u7406\u5458\u7528\u6237\u540D [\u6309 Enter \u952E\u5C06\u63A5\u53D7\u9ED8\u8BA4\u503C]>
#EN AdminPasswordPrompt=Enter admin password>
AdminPasswordPrompt=\u8BF7\u8F93\u5165\u7BA1\u7406\u5458\u53E3\u4EE4>
#EN AliasPasswordPrompt=Enter alias password>
AliasPasswordPrompt=\u8BF7\u8F93\u5165\u522B\u540D\u53E3\u4EE4>
#EN AdminPasswordConfirmationPrompt=Enter admin password again>
AdminPasswordConfirmationPrompt=\u8BF7\u518D\u6B21\u8F93\u5165\u7BA1\u7406\u5458\u53E3\u4EE4>
#EN AliasPasswordConfirmationPrompt=Enter alias password again>
AliasPasswordConfirmationPrompt=\u8BF7\u518D\u6B21\u8F93\u5165\u522B\u540D\u53E3\u4EE4>
#EN AdminNewPasswordPrompt=Enter new admin password>
AdminNewPasswordPrompt=\u8BF7\u8F93\u5165\u65B0\u7684\u7BA1\u7406\u5458\u53E3\u4EE4>
#EN AdminNewPasswordConfirmationPrompt=Enter new admin password again>
AdminNewPasswordConfirmationPrompt=\u8BF7\u518D\u6B21\u8F93\u5165\u65B0\u7684\u7BA1\u7406\u5458\u53E3\u4EE4>
#EN DomainExists=Domain exists: {0}
DomainExists=\u57DF\u5DF2\u5B58\u5728: {0}
#EN AdminPassword=admin password
AdminPassword=\u7BA1\u7406\u5458\u53E3\u4EE4
#EN InvalidPortRangeMsg=Invalid Port for {0}, should be between 1 and 65535. Using {1}
InvalidPortRangeMsg={0}\u7684\u7AEF\u53E3\u65E0\u6548, \u5E94\u5728 1 \u81F3 65535 \u4E4B\u95F4\u3002\u4F7F\u7528{1}
#EN NewPasswordPrompt=Enter {0} password>
NewPasswordPrompt=\u8BF7\u8F93\u5165{0}\u53E3\u4EE4>
#EN NewPasswordDefaultEmptyPrompt=Enter {0} password [Enter to accept default of no password]>
NewPasswordDefaultEmptyPrompt=\u8BF7\u8F93\u5165{0}\u53E3\u4EE4 [\u6309 Enter \u952E\u5C06\u63A5\u53D7\u9ED8\u8BA4\u503C (\u65E0\u53E3\u4EE4)]>
#EN NewPasswordDefaultPrompt=Enter {0} password [Enter to accept default password "{1}"]>
NewPasswordDefaultPrompt=\u8BF7\u8F93\u5165{0}\u53E3\u4EE4 [\u6309 Enter \u952E\u5C06\u63A5\u53D7\u9ED8\u8BA4\u53E3\u4EE4 "{1}"]>
#EN NewPasswordConfirmationPrompt=Enter {0} password again>
NewPasswordConfirmationPrompt=\u8BF7\u518D\u6B21\u8F93\u5165{0}\u53E3\u4EE4>
#EN NewPasswordDescriptionPrompt=Enter {0}>
NewPasswordDescriptionPrompt=\u8BF7\u8F93\u5165{0}>
#EN NewPasswordDescriptionDefaultEmptyPrompt=Enter {0} [Enter to accept default of no password]>
NewPasswordDescriptionDefaultEmptyPrompt=\u8BF7\u8F93\u5165{0}[\u6309 Enter \u952E\u5C06\u63A5\u53D7\u9ED8\u8BA4\u503C (\u65E0\u53E3\u4EE4)]>
#EN NewPasswordDescriptionDefaultPrompt=Enter {0} [Enter to accept default password "{1}"]>
NewPasswordDescriptionDefaultPrompt=\u8BF7\u8F93\u5165{0}[\u6309 Enter \u952E\u5C06\u63A5\u53D7\u9ED8\u8BA4\u53E3\u4EE4 "{1}"]>
#EN NewPasswordDescriptionConfirmationPrompt=Enter {0} again>
NewPasswordDescriptionConfirmationPrompt=\u8BF7\u518D\u6B21\u8F93\u5165{0}>
#EN MasterPasswordConfirmationPrompt=Enter the master password again>
MasterPasswordConfirmationPrompt=\u8BF7\u518D\u6B21\u8F93\u5165\u4E3B\u53E3\u4EE4>
#EN MasterPasswordConfirmationWithDefaultPrompt=Enter master password again [Enter to accept default]>
MasterPasswordConfirmationWithDefaultPrompt=\u8BF7\u518D\u6B21\u8F93\u5165\u4E3B\u53E3\u4EE4 [\u6309 Enter \u952E\u5C06\u63A5\u53D7\u9ED8\u8BA4\u503C]>
#EN MasterPasswordWithDefaultPrompt=Enter master password [Enter to accept default]>
MasterPasswordWithDefaultPrompt=\u8BF7\u8F93\u5165\u4E3B\u53E3\u4EE4 [\u6309 Enter \u952E\u5C06\u63A5\u53D7\u9ED8\u8BA4\u503C]>
#EN PortNotSpecified=Port for {0} is not specified. Using {1}
PortNotSpecified=\u672A\u6307\u5B9A{0}\u7684\u7AEF\u53E3\u3002\u4F7F\u7528{1}
#EN PortInUseError=Port for {0} ({1}) is in use. Try a different port number.
PortInUseError={0}\u7684\u7AEF\u53E3 ({1}) \u6B63\u5728\u4F7F\u7528\u4E2D\u3002\u8BF7\u5C1D\u8BD5\u5176\u4ED6\u7AEF\u53E3\u53F7\u3002
#EN PortInUseWarning=Warning: Port {0} is in use. Ignoring since the checkports option is set to false.
PortInUseWarning=\u8B66\u544A: \u7AEF\u53E3 {0} \u5DF2\u5360\u7528\u3002\u7531\u4E8E checkports \u9009\u9879\u8BBE\u7F6E\u4E3A\u201C\u5047\u201D, \u56E0\u6B64\u5FFD\u7565\u3002
#EN NoPermissionForPortError=You do not have permission to use port {0} for {1}. Try a different port number or login to a more privileged account.
NoPermissionForPortError=\u60A8\u65E0\u6743\u5C06\u7AEF\u53E3 {0} \u7528\u4E8E{1}\u3002\u8BF7\u5C1D\u8BD5\u5176\u4ED6\u7AEF\u53E3\u53F7\u6216\u767B\u5F55\u5230\u5177\u6709\u66F4\u9AD8\u6743\u9650\u7684\u5E10\u6237\u3002
#EN NoPermissionForPortMsg=You do not have permission to use port {0} for {1}. Try a different port number or login to a more privileged account.
NoPermissionForPortMsg=\u60A8\u65E0\u6743\u5C06\u7AEF\u53E3 {0} \u7528\u4E8E{1}\u3002\u8BF7\u5C1D\u8BD5\u5176\u4ED6\u7AEF\u53E3\u53F7\u6216\u767B\u5F55\u5230\u5177\u6709\u66F4\u9AD8\u6743\u9650\u7684\u5E10\u6237\u3002
#EN NoPermissionForPortWarning=Warning: You do not have permission to use port {0} for {1}. Ignoring since the checkports option is set to false.
NoPermissionForPortWarning=\u8B66\u544A: \u60A8\u65E0\u6743\u5C06\u7AEF\u53E3 {0} \u7528\u4E8E{1}\u3002\u7531\u4E8E checkports \u9009\u9879\u8BBE\u7F6E\u4E3A\u201C\u5047\u201D, \u56E0\u6B64\u5FFD\u7565\u3002
#EN UnknownPortMsg=Unknown error when trying port {0}. Try a different port number.
UnknownPortMsg=\u5C1D\u8BD5\u7AEF\u53E3 {0} \u65F6\u53D1\u751F\u672A\u77E5\u9519\u8BEF\u3002\u8BF7\u5C1D\u8BD5\u5176\u4ED6\u7AEF\u53E3\u53F7\u3002
#EN DefaultPortInUse=Default port {1} for {0} is in use. Using {2}
DefaultPortInUse={0}\u7684\u9ED8\u8BA4\u7AEF\u53E3 {1} \u5DF2\u5360\u7528\u3002\u4F7F\u7528{2}
#EN UsingDefaultPort=Using default port {1} for {0}.
UsingDefaultPort=\u4F7F\u7528{0}\u7684\u9ED8\u8BA4\u7AEF\u53E3 {1}\u3002
#EN UsingPort=Using port {1} for {0}.
UsingPort=\u4F7F\u7528{0}\u7684\u7AEF\u53E3 {1}\u3002
#EN PortPrivilege=On Unix platform, port numbers below 1024 may require special privileges.
PortPrivilege=\u5728 Unix \u5E73\u53F0\u4E0A, \u4F4E\u4E8E 1024 \u7684\u7AEF\u53E3\u53F7\u53EF\u80FD\u9700\u8981\u7279\u6B8A\u6743\u9650\u3002
#EN RequireEitherOrOption=Option {0} or {1} must be specified.
RequireEitherOrOption=\u5FC5\u987B\u6307\u5B9A\u9009\u9879{0}\u6216{1}\u3002
#EN UsingProfile=Domain being created with profile:{0}, as specified {1}.
UsingProfile=\u6B63\u5728\u4F5C\u4E3A\u6307\u5B9A{1}\u4F7F\u7528\u914D\u7F6E\u6587\u4EF6{0}\u521B\u5EFA\u57DF\u3002
#EN LoginInfoStored=Login information relevant to admin user name [{0}] for host [{1}] and admin port [{2}] stored at [{3}] successfully.\nMake sure that this file remains protected. Information stored in this file will be used by asadmin commands to manage associated domain.
LoginInfoStored=\u5DF2\u7ECF\u5C06\u4E0E\u4E3B\u673A [{1}] \u548C\u7BA1\u7406\u7AEF\u53E3 [{2}] \u7684\u7BA1\u7406\u5458\u7528\u6237\u540D [{0}] \u76F8\u5173\u7684\u767B\u5F55\u4FE1\u606F\u6210\u529F\u5730\u5B58\u50A8\u5728 [{3}] \u4E2D\u3002\n\u8BF7\u786E\u4FDD\u6B64\u6587\u4EF6\u4ECD\u4F1A\u53D7\u5230\u4FDD\u62A4\u3002asadmin \u547D\u4EE4\u5C06\u4F7F\u7528\u5B58\u50A8\u5728\u6B64\u6587\u4EF6\u4E2D\u7684\u4FE1\u606F\u6765\u7BA1\u7406\u5173\u8054\u57DF\u3002
#EN LoginInfoStoredCreateDomain=Login information relevant to admin user name [{0}] for this domain [{1}] stored at [{2}] successfully.\nMake sure that this file remains protected. Information stored in this file will be used by asadmin commands to manage this domain.
LoginInfoStoredCreateDomain=\u5DF2\u7ECF\u5C06\u4E0E\u6B64\u57DF [{1}] \u7684\u7BA1\u7406\u5458\u7528\u6237\u540D [{0}] \u76F8\u5173\u7684\u767B\u5F55\u4FE1\u606F\u6210\u529F\u5730\u5B58\u50A8\u5728 [{2}] \u4E2D\u3002\n\u8BF7\u786E\u4FDD\u6B64\u6587\u4EF6\u4ECD\u4F1A\u53D7\u5230\u4FDD\u62A4\u3002asadmin \u547D\u4EE4\u5C06\u4F7F\u7528\u5B58\u50A8\u5728\u6B64\u6587\u4EF6\u4E2D\u7684\u4FE1\u606F\u6765\u7BA1\u7406\u6B64\u57DF\u3002
#EN LoginInfoNotStored=Login information is not saved for host name [{0}] and port [{1}]
LoginInfoNotStored=\u672A\u4FDD\u5B58\u4E3B\u673A\u540D [{0}] \u548C\u7AEF\u53E3 [{1}] \u7684\u767B\u5F55\u4FE1\u606F
#EN AuthenticatingMsg=Trying to authenticate for administration of server at host [{0}] and port [{1}] ...
AuthenticatingMsg=\u6B63\u5728\u5C1D\u8BD5\u9A8C\u8BC1\u4E3B\u673A [{0}] \u548C\u7AEF\u53E3 [{1}] \u5904\u7684\u670D\u52A1\u5668\u7BA1\u7406\u6743\u9650...
#EN LoginInfoNotStoredCreateDomain=Login information relevant to admin user name [{0}] for this domain [{1}] could not be stored.\nThis means that the file .asadminpass in home folder is tampered.\nFix the format for this file.
LoginInfoNotStoredCreateDomain=\u65E0\u6CD5\u5B58\u50A8\u4E0E\u8BE5\u57DF [{1}] \u7BA1\u7406\u7528\u6237\u540D [{0}] \u76F8\u5173\u7684\u767B\u5F55\u4FE1\u606F\u3002\n\u8FD9\u8868\u793A\u4E3B\u6587\u4EF6\u5939\u4E2D\u7684\u6587\u4EF6 .asadminpass \u5DF2\u66F4\u6539\u3002\n\u4FEE\u590D\u6B64\u6587\u4EF6\u7684\u683C\u5F0F\u3002
#EN OverwriteLoginMsgCreateDomain=Admin login information for host [{0}] and port [{1}] is being overwritten with credentials provided. This is because the --savelogin option was used during create-domain command.
OverwriteLoginMsgCreateDomain=\u6B63\u5728\u4F7F\u7528\u63D0\u4F9B\u7684\u8EAB\u4EFD\u8BC1\u660E\u8986\u5199\u4E3B\u673A [{0}] \u548C\u7AEF\u53E3 [{1}] \u7684\u7BA1\u7406\u5458\u767B\u5F55\u4FE1\u606F\u3002\u8FD9\u662F\u56E0\u4E3A\u5728\u8FD0\u884C create-domain \u547D\u4EE4\u671F\u95F4\u4F7F\u7528\u4E86 --savelogin \u9009\u9879\u3002
#EN LoginInfoCouldNotBeRead=Login information could not be read for host name [{0}] and port [{1}]
LoginInfoCouldNotBeRead=\u65E0\u6CD5\u8BFB\u53D6\u4E3B\u673A\u540D [{0}] \u548C\u7AEF\u53E3 [{1}] \u7684\u767B\u5F55\u4FE1\u606F
#EN ConnectException=Remote server does not listen for requests on [{0}:{1}].\nPlease make sure the server is running.
ConnectException=\u8FDC\u7A0B\u670D\u52A1\u5668\u672A\u76D1\u542C [{0}:{1}] \u4E0A\u7684\u8BF7\u6C42\u3002\n\u8BF7\u786E\u4FDD\u670D\u52A1\u5668\u6B63\u5728\u8FD0\u884C\u3002
#EN InvalidCredentials=Authorization has been refused for credentials [user: {0}] given in this request.\n(Usually, this means invalid user name and/or password)
InvalidCredentials=\u9488\u5BF9\u6B64\u8BF7\u6C42\u4E2D\u63D0\u4F9B\u7684\u8EAB\u4EFD\u8BC1\u660E [\u7528\u6237: {0}] \u7684\u6388\u6743\u5DF2\u88AB\u62D2\u7EDD\u3002\n(\u901A\u5E38, \u8FD9\u610F\u5473\u7740\u7528\u6237\u540D\u548C/\u6216\u53E3\u4EE4\u65E0\u6548)
#Error Messages
#EN PasswordLimit=CLI128 Value for {0} must have 8 or more characters.
PasswordLimit=CLI128 {0}\u7684\u503C\u5FC5\u987B\u6709 8 \u4E2A\u6216\u66F4\u591A\u4E2A\u5B57\u7B26\u3002
#EN InvalidCharInDomain=CLI129 Invalid character in domain name, {0}
InvalidCharInDomain=CLI129 \u57DF\u540D{0}\u4E2D\u7684\u5B57\u7B26\u65E0\u6548
#EN CouldNotCreateDomain=CLI130 Could not create domain, {0}
CouldNotCreateDomain=CLI130 \u65E0\u6CD5\u521B\u5EFA\u57DF{0}
#EN InvalidPortNumber=CLI136 Port {0} should be a numeric value.
InvalidPortNumber=CLI136 \u7AEF\u53E3 {0} \u5E94\u4E3A\u6570\u5B57\u503C\u3002
#EN InvalidDomainPath=CLI138 Invalid domain path, {0}
InvalidDomainPath=CLI138 \u57DF\u8DEF\u5F84 {0} \u65E0\u6548
#EN CouldNotDeleteDomain=CLI139 Could not delete domain, {0}.
CouldNotDeleteDomain=CLI139 \u65E0\u6CD5\u5220\u9664\u57DF{0}\u3002
#EN NoDomainsToList=CLI141 No Domains to list.
NoDomainsToList=CLI141 \u6CA1\u6709\u53EF\u4EE5\u5217\u51FA\u7684\u57DF\u3002
#EN NoDomains=CLI142 No domains in {0}.
NoDomains=CLI142 {0}\u4E2D\u6CA1\u6709\u57DF\u3002
#EN FileDoesNotExist=CLI146 {0} does not exist in the file system or read permission denied.
FileDoesNotExist=CLI146 \u6587\u4EF6\u7CFB\u7EDF\u4E2D\u4E0D\u5B58\u5728{0}\u6216\u8BFB\u53D6\u6743\u9650\u88AB\u62D2\u7EDD\u3002
#EN DomainXMLDoesNotExist=CLI155 {0} does not exist.
DomainXMLDoesNotExist=CLI155 {0}\u4E0D\u5B58\u5728\u3002
#EN InvalidPortRange=CLI160 Invalid Port {0}, should be between 1 and 65535.
InvalidPortRange=CLI160 \u7AEF\u53E3 {0} \u65E0\u6548, \u5E94\u5728 1 \u548C 65535 \u4E4B\u95F4\u3002
#EN OptionsDoNotMatch=CLI173 Values entered for {0} do not match.
OptionsDoNotMatch=CLI173 \u4E3A{0}\u8F93\u5165\u7684\u503C\u4E0D\u5339\u914D\u3002
#EN InvalidPortBaseRange=CLI211 Invalid Port {0} for {1}, should be between 1 and 65535. Choose a portbase value such that the resulting port number does not exceed 65535.
InvalidPortBaseRange=CLI211 {1}\u7684\u7AEF\u53E3 {0} \u65E0\u6548, \u5E94\u5728 1 \u548C 65535 \u4E4B\u95F4\u3002\u9009\u62E9 portbase \u503C, \u4ECE\u800C\u4F7F\u751F\u6210\u7684\u7AEF\u53E3\u53F7\u4E0D\u8D85\u8FC7 65535\u3002
#EN MutuallyExclusiveOption=CLI169 Options {0} and {1} are mutually exclusive. You must specify one or the other but not both.
MutuallyExclusiveOption=CLI169 \u9009\u9879{0}\u548C\u9009\u9879{1}\u76F8\u4E92\u6392\u65A5\u3002\u5FC5\u987B\u6307\u5B9A\u5176\u4E2D\u4E4B\u4E00, \u800C\u4E0D\u80FD\u540C\u65F6\u6307\u5B9A\u4E24\u8005\u3002
#EN UnsupportedLegacyCommand=CLI194 Previously supported command: {0} is not supported for this release.
UnsupportedLegacyCommand=CLI194 \u6B64\u53D1\u884C\u7248\u4E0D\u652F\u6301\u4EE5\u524D\u652F\u6301\u7684\u547D\u4EE4{0}\u3002
#EN NoScope=CLI195 Implementation for the command {0} exists in the system,\nbut it has no @Scoped annotation
NoScope=CLI195 \u547D\u4EE4{0}\u7684\u5B9E\u73B0\u5728\u7CFB\u7EDF\u4E2D\u5B58\u5728, \n\u4F46\u5B83\u6CA1\u6709 @Scoped \u6CE8\u91CA
#EN HasParams=CLI196 Implementation for the command {0} exists in the system,\nbut it's a singleton that also has parameters
HasParams=CLI196 \u547D\u4EE4{0}\u7684\u5B9E\u73B0\u5728\u7CFB\u7EDF\u4E2D\u5B58\u5728, \n\u4F46\u5B83\u662F\u4E00\u4E2A\u4E5F\u5177\u6709\u53C2\u6570\u7684\u5355\u4F8B
#EN NullNewPassword=CLI197: New password must not be null when secure-admin is enabled.
NullNewPassword=CLI197: \u542F\u7528 secure-admin \u65F6\u65B0\u53E3\u4EE4\u4E0D\u80FD\u662F\u7A7A\u503C\u3002
#EN NotFileRealmCannotChangeLocally=CLI198: The admin realm is not a file based realm.The admin password cannot be changed locally.
NotFileRealmCannotChangeLocally=CLI198: \u7BA1\u7406\u5458\u9886\u57DF\u4E0D\u662F\u57FA\u4E8E\u6587\u4EF6\u7684\u9886\u57DF\u3002\u4E0D\u80FD\u5728\u672C\u5730\u66F4\u6539\u7BA1\u7406\u5458\u53E3\u4EE4\u3002
#EN CannotExecuteLocally=CLI199: This command cannot be executed locally.
CannotExecuteLocally=CLI199: \u4E0D\u80FD\u5728\u672C\u5730\u6267\u884C\u6B64\u547D\u4EE4\u3002
## LocalDomainsCommand class
#EN Domain.badDomainsDir=CLI300 The specified domaindir is not a directory: {0}
Domain.badDomainsDir=CLI300 \u6307\u5B9A\u7684 domaindir \u4E0D\u662F\u76EE\u5F55: {0}
#EN Domain.badDomainDir=CLI301 There is no such domain directory: {0}
Domain.badDomainDir=CLI301 \u6CA1\u6709\u8FD9\u6837\u7684\u57DF\u76EE\u5F55: {0}
#EN Domain.noDomainXml=CLI304 Cannot find domain.xml. It should be here: {0}
Domain.noDomainXml=CLI304 \u627E\u4E0D\u5230 domain.xml\u3002\u5B83\u5E94\u4F4D\u4E8E\u6B64\u5904: {0}
## stop-domain command
#EN StopDomain.dasNotRunning=CLI306 Warning - The server located at {0} is not running.
StopDomain.dasNotRunning=CLI306 \u8B66\u544A - \u4F4D\u4E8E{0}\u5904\u7684\u670D\u52A1\u5668\u672A\u8FD0\u884C\u3002
#EN StopDomain.dasNotRunningRemotely=CLI307 Warning - remote server is not running, unable to force it to stop.\n\
#EN Try running stop-domain on the remote server.
StopDomain.dasNotRunningRemotely=CLI307 \u8B66\u544A - \u8FDC\u7A0B\u670D\u52A1\u5668\u672A\u8FD0\u884C, \u65E0\u6CD5\u5F3A\u5236\u5176\u505C\u6B62\u3002\n\u5C1D\u8BD5\u5728\u8FDC\u7A0B\u670D\u52A1\u5668\u4E0A\u8FD0\u884C stop-domain\u3002
#EN StopDomain.WaitDASDeath=Waiting for the domain to stop
StopDomain.WaitDASDeath=\u6B63\u5728\u7B49\u5F85\u57DF\u505C\u6B62
#EN StopDomain.DASNotDead=Timed out ({0} seconds) waiting for the domain to stop.
StopDomain.DASNotDead=\u7B49\u5F85\u57DF\u505C\u6B62\u65F6\u8D85\u65F6 ({0} \u79D2)\u3002
#EN StopDomain.noDomainNameAllowed=No domain name allowed with --host option.
StopDomain.noDomainNameAllowed=--host \u9009\u9879\u4E0D\u5141\u8BB8\u4F7F\u7528\u57DF\u540D\u3002
#EN StopDomain.nopidprev=Can not find the process ID of the server. It is supposed to be here: {0}. Unable to kill the process.
StopDomain.nopidprev=\u627E\u4E0D\u5230\u670D\u52A1\u5668\u7684\u8FDB\u7A0B ID\u3002\u5B83\u5E94\u8BE5\u4F4D\u4E8E: {0}\u3002\u65E0\u6CD5\u7EC8\u6B62\u8FDB\u7A0B\u3002
#EN StopDomain.pidprevreaderror=Error trying to read the Process ID from {0}: {1}
StopDomain.pidprevreaderror=\u5C1D\u8BD5\u4ECE{0}\u8BFB\u53D6\u8FDB\u7A0B ID \u65F6\u51FA\u9519: {1}
#EN StopDomain.killerror=Error attempting to kill the server with Process ID {0} with native platform tools. Error message was: {1}
StopDomain.killerror=\u5C1D\u8BD5\u4F7F\u7528\u672C\u673A\u5E73\u53F0\u5DE5\u5177\u7EC8\u6B62\u8FDB\u7A0B ID \u4E3A {0} \u7684\u670D\u52A1\u5668\u65F6\u51FA\u9519\u3002\u9519\u8BEF\u6D88\u606F\u4E3A: {1}
#EN StopDomain.killerror2=Error attempting to kill the server with native platform tools. \n\
#EN Command Line: {0}\n\
#EN Platform Error Message: {1}\n\
#EN Return Value: {2}
StopDomain.killerror2=\u5C1D\u8BD5\u4F7F\u7528\u672C\u673A\u5E73\u53F0\u5DE5\u5177\u7EC8\u6B62\u670D\u52A1\u5668\u65F6\u51FA\u9519\u3002\n\u547D\u4EE4\u884C: {0}\n\u5E73\u53F0\u9519\u8BEF\u6D88\u606F: {1}\n\u8FD4\u56DE\u503C: {2}
#EN StopDomain.killsuccess=Successfully killed the server process. Message from the OS: {0}
StopDomain.killsuccess=\u5DF2\u6210\u529F\u7EC8\u6B62\u670D\u52A1\u5668\u8FDB\u7A0B\u3002\u6765\u81EA\u64CD\u4F5C\u7CFB\u7EDF\u7684\u6D88\u606F: {0}
#EN StopDomain.killsuccess2=Successfully killed the server process forcibly.
StopDomain.killsuccess2=\u5DF2\u6210\u529F\u5F3A\u5236\u7EC8\u6B62\u670D\u52A1\u5668\u8FDB\u7A0B\u3002
#EN StopDomain.killedNormally=The server died normally with no need to use force.
StopDomain.killedNormally=\u8BE5\u670D\u52A1\u5668\u5DF2\u6B63\u5E38\u505C\u6B62, \u65E0\u9700\u4F7F\u7528\u5F3A\u5236\u9009\u9879\u3002
## start-database, stop-database command
#EN DatabaseNotInstalled=The database is not installed. Please download and install the database from the Update Center.
DatabaseNotInstalled=\u672A\u5B89\u88C5\u6570\u636E\u5E93\u3002\u8BF7\u4ECE\u66F4\u65B0\u4E2D\u5FC3\u4E0B\u8F7D\u6570\u636E\u5E93\u5E76\u5B89\u88C5\u3002
#EN DatabaseStartMsg=Starting database in the background.
DatabaseStartMsg=\u6B63\u5728\u540E\u53F0\u542F\u52A8\u6570\u636E\u5E93\u3002
#EN LogRedirectedTo=Log redirected to {0}.
LogRedirectedTo=\u5DF2\u5C06\u65E5\u5FD7\u91CD\u5B9A\u5411\u81F3{0}\u3002
#EN StartDatabaseStatus=Database already started on host {0}, port {1}.
StartDatabaseStatus=\u5DF2\u5728\u4E3B\u673A{0}\u548C\u7AEF\u53E3 {1} \u4E0A\u542F\u52A8\u6570\u636E\u5E93\u3002
#EN StopDatabaseStatus=Unable to stop database on host {0}, port {1}.
StopDatabaseStatus=\u65E0\u6CD5\u5728\u4E3B\u673A{0}\u548C\u7AEF\u53E3 {1} \u4E0A\u505C\u6B62\u6570\u636E\u5E93\u3002
#EN UnableToStartDatabase=Unable to start database. Please check log in {0}.
UnableToStartDatabase=\u65E0\u6CD5\u542F\u52A8\u6570\u636E\u5E93\u3002\u8BF7\u67E5\u770B{0}\u4E2D\u7684\u65E5\u5FD7\u3002
#EN UnableToAccessDatabaseLog=Unable to access derby.log in {0}.
UnableToAccessDatabaseLog=\u65E0\u6CD5\u8BBF\u95EE{0}\u4E2D\u7684 derby.log\u3002
#EN UnableToConnectToDatabase=Unable to connect to database.
UnableToConnectToDatabase=\u65E0\u6CD5\u8FDE\u63A5\u5230\u6570\u636E\u5E93\u3002
#EN database.info.msg=Database started in Network Server mode on host {0} and port {1}.
database.info.msg=\u6570\u636E\u5E93\u4EE5\u7F51\u7EDC\u670D\u52A1\u5668\u6A21\u5F0F\u5728\u4E3B\u673A{0}\u548C\u7AEF\u53E3 {1} \u4E0A\u542F\u52A8\u3002
#EN database.driver.name.msg=Clients can connect to the database using: [{0}].
database.driver.name.msg=\u5BA2\u6237\u673A\u53EF\u4EE5\u4F7F\u7528 [{0}] \u8FDE\u63A5\u5230\u6570\u636E\u5E93\u3002
#EN database.driver.version.msg=Database Driver Version: [{0}]
database.driver.version.msg=\u6570\u636E\u5E93\u9A71\u52A8\u7A0B\u5E8F\u7248\u672C: [{0}]
#EN jdbc.version.msg=JDBC Specification Version: [{0}]
jdbc.version.msg=JDBC \u89C4\u8303\u7248\u672C: [{0}]
#EN CouldNotGetSysInfo=Unable to retrieve database system information.
CouldNotGetSysInfo=\u65E0\u6CD5\u68C0\u7D22\u6570\u636E\u5E93\u7CFB\u7EDF\u4FE1\u606F\u3002
###
#EN noPorts=Error in domain.xml -- no administration ports found.
noPorts=domain.xml \u51FA\u9519 - \u672A\u627E\u5230\u7BA1\u7406\u7AEF\u53E3\u3002
#EN WaitServer=Waiting for {0} to start
WaitServer=\u6B63\u5728\u7B49\u5F85{0}\u542F\u52A8
#EN serverDied=Error starting {0}.\nThe server exited prematurely with exit code {1}.
serverDied=\u542F\u52A8{0}\u65F6\u51FA\u9519\u3002\n\u670D\u52A1\u5668\u63D0\u524D\u9000\u51FA, \u9000\u51FA\u4EE3\u7801\u4E3A {1}\u3002
#EN serverDiedOutput=Error starting {0}.\nThe server exited prematurely with exit code {1}.\nBefore it died, it produced the following output:\n\n{2}
serverDiedOutput=\u542F\u52A8{0}\u65F6\u51FA\u9519\u3002\n\u670D\u52A1\u5668\u63D0\u524D\u9000\u51FA, \u9000\u51FA\u4EE3\u7801\u4E3A {1}\u3002\n\u5728\u7EC8\u6B62\u4E4B\u524D, \u670D\u52A1\u5668\u751F\u6210\u4E86\u4EE5\u4E0B\u8F93\u51FA: \n\n{2}
#EN remoteError=Error on remote server: {0}
remoteError=\u8FDC\u7A0B\u670D\u52A1\u5668\u51FA\u9519: {0}
#EN unknownFormat=Unknown server response.
unknownFormat=\u672A\u77E5\u7684\u670D\u52A1\u5668\u54CD\u5E94\u3002
#EN cause=Cause: {0}
cause=\u539F\u56E0\u4E3A: {0}
#EN listCommands.notBoth=You can't specify both --localonly and --remoteonly as true at the same time.
listCommands.notBoth=\u60A8\u4E0D\u80FD\u540C\u65F6\u5C06 --localonly \u548C --remoteonly \u6307\u5B9A\u4E3A\u201C\u771F\u201D\u3002
#EN listCommands.localCommandHeader=********** Local Commands **********
listCommands.localCommandHeader=********** \u672C\u5730\u547D\u4EE4 **********
#EN listCommands.localCommandNoMatch=No local commands match.
listCommands.localCommandNoMatch=\u6CA1\u6709\u5339\u914D\u7684\u672C\u5730\u547D\u4EE4\u3002
#EN listCommands.remoteCommandHeader=********** Remote Commands **********
listCommands.remoteCommandHeader=********** \u8FDC\u7A0B\u547D\u4EE4 **********
#EN listCommands.remoteCommandNoMatch=No remote commands match.
listCommands.remoteCommandNoMatch=\u6CA1\u6709\u5339\u914D\u7684\u8FDC\u7A0B\u547D\u4EE4\u3002
#EN remote.noargs=Invalid call to RemoteCommand with no arguments.
remote.noargs=\u4E0D\u5E26\u53C2\u6570\u7684 RemoteCommand \u8C03\u7528\u65E0\u6548\u3002
#EN introduction.noremote=\nCan't connect to server to get the remote commands list. \nStart the server with 'asadmin start-domain' and run 'asadmin' again to see the remote commands that are available.
introduction.noremote=\n\u65E0\u6CD5\u8FDE\u63A5\u5230\u670D\u52A1\u5668\u83B7\u53D6\u8FDC\u7A0B\u547D\u4EE4\u5217\u8868\u3002\n\u4F7F\u7528 'asadmin start-domain' \u542F\u52A8\u670D\u52A1\u5668, \u7136\u540E\u518D\u6B21\u8FD0\u884C 'asadmin' \u6765\u67E5\u770B\u53EF\u7528\u7684\u8FDC\u7A0B\u547D\u4EE4\u3002
#start-domain and start-instance
#EN ServerRunning=There is a process already using the admin port {0} -- it probably is another instance of a GlassFish server.
ServerRunning=\u6709\u4E00\u4E2A\u8FDB\u7A0B\u5DF2\u5360\u7528\u7BA1\u7406\u7AEF\u53E3 {0} - \u53EF\u80FD\u662F GlassFish Server \u7684\u53E6\u4E00\u4E2A\u5B9E\u4F8B\u3002
#EN ServerStart.SuccessMessage=Successfully started the {0}: {1}\n{0} Location: {2}\nLog File: {3}\nAdmin Port: {4}
ServerStart.SuccessMessage=\u6210\u529F\u542F\u52A8\u4E86{0}: {1}\n{0}\u4F4D\u7F6E: {2}\n\u65E5\u5FD7\u6587\u4EF6: {3}\n\u7BA1\u7406\u7AEF\u53E3: {4}
#EN ServerStart.DebuggerMessage=Debugging is enabled. The debugging port is: {0}
ServerStart.DebuggerMessage=\u8C03\u8BD5\u5DF2\u542F\u7528\u3002\u8C03\u8BD5\u7AEF\u53E3\u4E3A: {0}
#EN ServerStart.DebuggerSuspendedMessage=Debugging is enabled and the server is suspended. \
#EN Please attach to the debugging port at: {0}
ServerStart.DebuggerSuspendedMessage=\u8C03\u8BD5\u5DF2\u542F\u7528, \u5E76\u4E14\u670D\u52A1\u5668\u5DF2\u6302\u8D77\u3002\u8BF7\u9644\u52A0\u5230\u4EE5\u4E0B\u8C03\u8BD5\u7AEF\u53E3: {0}
#EN DomainLocation=Started domain: {0}\nDomain location: {1}\nLog file: {2}
DomainLocation=\u5DF2\u542F\u52A8\u7684\u57DF: {0}\n\u57DF\u4F4D\u7F6E: {1}\n\u65E5\u5FD7\u6587\u4EF6: {2}
#EN DomainAdminPort=Admin port for the domain: {0}
DomainAdminPort=\u57DF\u7684\u7BA1\u7406\u7AEF\u53E3: {0}
#EN DomainDebugPort=Debug port for the domain: {0}
DomainDebugPort=\u57DF\u7684\u8C03\u8BD5\u7AEF\u53E3: {0}
#EN mp.prompt=Enter master password ({0}) attempt(s) remain)>
mp.prompt=\u8BF7\u8F93\u5165\u4E3B\u53E3\u4EE4 (\u8FD8\u80FD\u5C1D\u8BD5 {0} \u6B21)>
#EN no.console=The Master Password is required to start the domain. No console, no prompting possible. You should either create the domain \
#EN with --savemasterpassword=true or provide a password file with the --passwordfile option.
no.console=\u9700\u8981\u4E3B\u53E3\u4EE4\u4EE5\u542F\u52A8\u57DF\u3002\u65E0\u63A7\u5236\u53F0, \u65E0\u6CD5\u63D0\u793A\u3002\u5E94\u4F7F\u7528 --savemasterpassword=true \u521B\u5EFA\u57DF\u6216\u4F7F\u7528 --passwordfile \u9009\u9879\u63D0\u4F9B\u53E3\u4EE4\u6587\u4EF6\u3002
#EN retry.mp=Sorry, incorrect master password, retry
retry.mp=\u5BF9\u4E0D\u8D77, \u4E3B\u53E3\u4EE4\u4E0D\u6B63\u786E, \u8BF7\u91CD\u8BD5
#EN mp.giveup=Number of attempts ({0}) exhausted, giving up
mp.giveup=\u5DF2\u8FBE\u5230\u5C1D\u8BD5\u6B21\u6570 ({0}), \u8BF7\u653E\u5F03
#EN new.adminpw=an admin password for user "{0}"
new.adminpw=\u7528\u6237 "{0}" \u7684\u7BA1\u7406\u5458\u53E3\u4EE4
#EN new.adminpw.prompt=This domain requires an administrative password to be set before\n\
#EN the domain can be started. Please specify an administrative password.
new.adminpw.prompt=\u6B64\u57DF\u8981\u6C42\u5728\u542F\u52A8\u4E4B\u524D\u8BBE\u7F6E\n\u7BA1\u7406\u53E3\u4EE4\u3002\u8BF7\u6307\u5B9A\u7BA1\u7406\u53E3\u4EE4\u3002
#EN upgradeNeeded=Domain needs to be upgraded before it can be started.\nAttempting upgrade now...
upgradeNeeded=\u57DF\u5728\u53EF\u542F\u52A8\u4E4B\u524D\u9700\u8981\u5347\u7EA7\u3002\n\u6B63\u5728\u5C1D\u8BD5\u5347\u7EA7...
#EN manualUpgradeNeeded=The configuration data for this domain must be upgraded to run with this\nversion of the software. To upgrade the data, run:\n\tasadmin start-domain --upgrade\nThen start the domain normally.
manualUpgradeNeeded=\u8981\u5728\u6B64\u8F6F\u4EF6\u7248\u672C\u4E0B\u8FD0\u884C\u8BE5\u57DF, \u5FC5\u987B\u5148\u5BF9\u5176\u4E2D\u7684\u914D\u7F6E\u6570\u636E\u8FDB\u884C\u5347\u7EA7\u3002\n\u8981\u5347\u7EA7\u6570\u636E, \u8BF7\u8FD0\u884C:\n\tasadmin start-domain --upgrade\n\u57DF\u968F\u5373\u6B63\u5E38\u542F\u52A8\u3002
#EN upgradeSuccessful=Upgrade was successful, starting domain...
upgradeSuccessful=\u5347\u7EA7\u6210\u529F, \u6B63\u5728\u542F\u52A8\u57DF...
#EN upgradeFailed=Error upgrading domain: {0}.\nThe server exited prematurely with exit code {1}.
upgradeFailed=\u5347\u7EA7\u57DF\u65F6\u51FA\u9519: {0}\u3002\n\u670D\u52A1\u5668\u63D0\u524D\u9000\u51FA, \u9000\u51FA\u4EE3\u7801\u4E3A {1}\u3002
#EN upgradeFailedOutput=Error upgrading domain: {0}.\nThe server exited prematurely with exit code {1}.\nBefore it died, it produced the following output:\n\n{2}
upgradeFailedOutput=\u5347\u7EA7\u57DF\u65F6\u51FA\u9519: {0}\u3002\n\u670D\u52A1\u5668\u63D0\u524D\u9000\u51FA, \u9000\u51FA\u4EE3\u7801\u4E3A {1}\u3002\n\u5728\u7EC8\u6B62\u4E4B\u524D, \u670D\u52A1\u5668\u751F\u6210\u4E86\u4EE5\u4E0B\u8F93\u51FA: \n\n{2}
#EN Usage=Usage: {0}
Usage=\u7528\u6CD5: {0}
#EN Usage.asadmin=asadmin [asadmin-utility-options]
Usage.asadmin=asadmin [asadmin-utility-options]
#EN Usage.default=(default:{0})
Usage.default=(\u9ED8\u8BA4: {0})
#EN Asadmin.usage=Usage: asadmin [-H|--host ]\n\t[-p|--port ] [-u|--user ]\n\t[-W|--passwordfile ]\n\t[-t|--terse[=]]\n\t[-s|--secure[=]]\n\t[-e|--echo[=]]\n\t[-I|--interactive[=]]\n\t[-?|--help[=]] [subcommand [options] [operands]]
Asadmin.usage=\u7528\u6CD5: asadmin [-H|--host ]\n\t[-p|--port ] [-u|--user ]\n\t[-W|--passwordfile ]\n\t[-t|--terse[=]]\n\t[-s|--secure[=]]\n\t[-e|--echo[=]]\n\t[-I|--interactive[=]]\n\t[-?|--help[=]] [subcommand [options] [operands]]
#EN OptionDeprecated=Option {0} deprecated.
OptionDeprecated=\u9009\u9879{0}\u5DF2\u8FC7\u65F6\u3002
#EN OptionDeprecatedUseNew=Option {0} deprecated, use --{1} instead.
OptionDeprecatedUseNew=\u9009\u9879{0}\u5DF2\u8FC7\u65F6, \u8BF7\u4F7F\u7528 --{1}\u3002
#EN UnableToReadEnv=Unable to read system environment. No system environment will be used.
UnableToReadEnv=\u65E0\u6CD5\u8BFB\u53D6\u7CFB\u7EDF\u73AF\u5883\u3002\u5C06\u4E0D\u4F7F\u7528\u7CFB\u7EDF\u73AF\u5883\u3002
#EN ClosestMatchedCommands=Closest matching command(s):
ClosestMatchedCommands=\u6700\u63A5\u8FD1\u7684\u5339\u914D\u547D\u4EE4:
#EN ClosestMatchedLocalAndRemoteCommands=Closest matching local and remote command(s):
ClosestMatchedLocalAndRemoteCommands=\u6700\u63A5\u8FD1\u7684\u5339\u914D\u672C\u5730\u548C\u8FDC\u7A0B\u547D\u4EE4:
#EN ClosestMatchedLocalCommands=Unable to get remote commands. \nClosest matching local command(s):
ClosestMatchedLocalCommands=\u65E0\u6CD5\u83B7\u53D6\u8FDC\u7A0B\u547D\u4EE4\u3002\n\u6700\u63A5\u8FD1\u7684\u5339\u914D\u672C\u5730\u547D\u4EE4:
#Error Messages
#EN InvalidCommand=CLI001 Invalid Command: {0}. Check the entry of command name. This command may be provided by a package that is not installed.
InvalidCommand=CLI001 \u65E0\u6548\u547D\u4EE4: {0}\u3002\u68C0\u67E5\u547D\u4EE4\u540D\u79F0\u7684\u8F93\u5165\u3002\u6B64\u547D\u4EE4\u53EF\u80FD\u7531\u5C1A\u672A\u5B89\u88C5\u7684\u7A0B\u5E8F\u5305\u63D0\u4F9B\u3002
#EN UnableToCreateCommand=CLI002 Unable to create command object, {0}
UnableToCreateCommand=CLI002 \u65E0\u6CD5\u521B\u5EFA\u547D\u4EE4\u5BF9\u8C61{0}
#EN NoDescriptorsDefined=CLI003 No descriptors defined.
NoDescriptorsDefined=CLI003 \u672A\u5B9A\u4E49\u63CF\u8FF0\u7B26\u3002
#EN CouldNotLoadDescriptor=CLI004 Could not load the descriptor URLs.
CouldNotLoadDescriptor=CLI004 \u65E0\u6CD5\u52A0\u8F7D\u63CF\u8FF0\u7B26 URL\u3002
#EN CouldNotWriteCommandToFile=CLI005 Could not write the command, {0} to a file.
CouldNotWriteCommandToFile=CLI005 \u65E0\u6CD5\u5C06\u547D\u4EE4{0}\u5199\u5165\u6587\u4EF6\u3002
#EN CouldNotWriteComponentToFile=CLI006 Could not write the component, {0} to a file.
CouldNotWriteComponentToFile=CLI006 \u65E0\u6CD5\u5C06\u7EC4\u4EF6{0}\u5199\u5165\u6587\u4EF6\u3002
#EN InvalidFilePath=CLI007 Invalid file path, {0}.
InvalidFilePath=CLI007 \u6587\u4EF6\u8DEF\u5F84 {0} \u65E0\u6548\u3002
#EN CouldNoSetSerializeDirectory=CLI008 Could not set the serialize directory.
CouldNoSetSerializeDirectory=CLI008 \u65E0\u6CD5\u8BBE\u7F6E\u5E8F\u5217\u5316\u76EE\u5F55\u3002
#EN CouldNotFindLocalStringsProperties=CLI009 Could not find LocalStrings.properties file.
CouldNotFindLocalStringsProperties=CLI009 \u65E0\u6CD5\u627E\u5230 LocalStrings.properties \u6587\u4EF6\u3002
#EN OptionValueNotSpecified=CLI010 Value not specified for {0}
OptionValueNotSpecified=CLI010 \u6CA1\u6709\u4E3A{0}\u6307\u5B9A\u503C
#EN NoSuchOption=CLI011 Invalid option, {0}
NoSuchOption=CLI011 \u9009\u9879{0}\u65E0\u6548
#EN CouldNotValidateCommand=CLI012 Could not validate command.
CouldNotValidateCommand=CLI012 \u65E0\u6CD5\u9A8C\u8BC1\u547D\u4EE4\u3002
#EN InvalidOption=CLI013 Option {0} does not apply to {1}.
InvalidOption=CLI013 \u9009\u9879{0}\u4E0D\u9002\u7528\u4E8E{1}\u3002
#EN OptionIsRequired=CLI014 {0} is a required option. In case of password information, use passwordfile option.
OptionIsRequired=CLI014 {0}\u4E3A\u5FC5\u9700\u9009\u9879\u3002\u5BF9\u4E8E\u53E3\u4EE4\u4FE1\u606F, \u8BF7\u4F7F\u7528 passwordfile \u9009\u9879\u3002
#EN OptionIsBoolean=CLI015 Invalid value for {0}. Option accepts true or false.
OptionIsBoolean=CLI015 {0}\u7684\u503C\u65E0\u6548\u3002\u9009\u9879\u63A5\u53D7\u201C\u771F\u201D\u6216\u201C\u5047\u201D\u3002
#EN ZeroOrOneOperand=CLI016 Invalid number of operands. Number of operands should be 0 or 1.
ZeroOrOneOperand=CLI016 \u64CD\u4F5C\u6570\u7684\u6570\u76EE\u65E0\u6548\u3002\u64CD\u4F5C\u6570\u7684\u6570\u76EE\u5E94\u4E3A 0 \u6216 1\u3002
#EN GreaterThanOneOperand=CLI017 Invalid number of operands. Number of operands should be greater than 1.
GreaterThanOneOperand=CLI017 \u64CD\u4F5C\u6570\u7684\u6570\u76EE\u65E0\u6548\u3002\u64CD\u4F5C\u6570\u7684\u6570\u76EE\u5E94\u5927\u4E8E 1\u3002
#EN GreaterOrEqualToOperand=CLI018 Invalid number of operands. Number of operands should be greater than or equal to {0}.
GreaterOrEqualToOperand=CLI018 \u64CD\u4F5C\u6570\u7684\u6570\u76EE\u65E0\u6548\u3002\u64CD\u4F5C\u6570\u7684\u6570\u76EE\u5E94\u5927\u4E8E\u7B49\u4E8E{0}\u3002
#EN EqualToOperand=CLI019 Invalid number of operands. Number of operands should be equal to {0}.
EqualToOperand=CLI019 \u64CD\u4F5C\u6570\u7684\u6570\u76EE\u65E0\u6548\u3002\u64CD\u4F5C\u6570\u7684\u6570\u76EE\u5E94\u7B49\u4E8E{0}\u3002
#EN OperandIsRequired=CLI020 Operand is required.
OperandIsRequired=CLI020 \u64CD\u4F5C\u6570\u662F\u5FC5\u9700\u7684\u3002
#EN BetweenNumberOperand=CLI021 Number of operand should be between {0} and {1}.
BetweenNumberOperand=CLI021 \u64CD\u4F5C\u6570\u7684\u6570\u76EE\u5E94\u5728 {0} \u548C {1} \u4E4B\u95F4\u3002
#EN InvalidSytanxForNumberOfOperands=CLI022 Invalid syntax for numberofoperands,{0}.
InvalidSytanxForNumberOfOperands=CLI022 \u64CD\u4F5C\u6570\u6570\u76EE{0}\u7684\u8BED\u6CD5\u65E0\u6548\u3002
#EN CommandNotSpecified=CLI023 Command not specified.
CommandNotSpecified=CLI023 \u672A\u6307\u5B9A\u547D\u4EE4\u3002
#EN CouldNotReadInputStream=CLI024 Could not read input stream.
CouldNotReadInputStream=CLI024 \u65E0\u6CD5\u8BFB\u53D6\u8F93\u5165\u6D41\u3002
#EN RequireEscapeChar=CLI025 An escape character is required in your input.
RequireEscapeChar=CLI025 \u8F6C\u4E49\u7B26\u5728\u8F93\u5165\u4E2D\u662F\u5FC5\u9700\u7684\u3002
#EN DuplicateOptionDeclaration=CLI026 Multiple declaration of option "{0}" in the descriptor file.
DuplicateOptionDeclaration=CLI026 \u63CF\u8FF0\u7B26\u6587\u4EF6\u4E2D\u591A\u6B21\u58F0\u660E\u9009\u9879 "{0}"\u3002
#EN RequiredOptionNotDefined=CLI028 RequiredOption "{0}" is not defined in descriptor file.
RequiredOptionNotDefined=CLI028 \u63CF\u8FF0\u7B26\u6587\u4EF6\u4E2D\u672A\u5B9A\u4E49 RequiredOption "{0}"\u3002
#EN DeprecatedOptionNotDefined=CLI028 DeprecatedOption "{0}" is not defined in descriptor file.
DeprecatedOptionNotDefined=CLI028 \u63CF\u8FF0\u7B26\u6587\u4EF6\u4E2D\u672A\u5B9A\u4E49 DeprecatedOption "{0}"\u3002
#EN OptionAlreadyDefined=CLI029 Option name "{0}" is already defined in command, "{1}".
OptionAlreadyDefined=CLI029 \u547D\u4EE4 "{1}" \u4E2D\u5DF2\u5B9A\u4E49\u9009\u9879\u540D\u79F0 "{0}"\u3002
#EN ShortOptionAlreadyDefined=CLI030 Short Option "{0}" for options "{1}" and "{2}" is already defined in command, "{3}".
ShortOptionAlreadyDefined=CLI030 \u547D\u4EE4 "{3}" \u4E2D\u5DF2\u5B9A\u4E49\u7528\u4E8E\u9009\u9879 "{1}" \u548C "{2}" \u7684\u77ED\u9009\u9879 "{0}"\u3002
#EN ObsoleteOption=CLI031 Warning: Option "{0}" is obsolete and will be ignored.
ObsoleteOption=CLI031 \u8B66\u544A: \u9009\u9879 "{0}" \u5DF2\u4F5C\u5E9F, \u5C06\u88AB\u5FFD\u7565\u3002
#EN PasswordsNotAllowedOnCommandLine=CLI193 Password option "{0}" is not allowed on the command line. Please use --passwordfile option or asadmin login command.
PasswordsNotAllowedOnCommandLine=CLI193 \u4E0D\u5141\u8BB8\u5728\u547D\u4EE4\u884C\u4E2D\u4F7F\u7528\u53E3\u4EE4\u9009\u9879 "{0}"\u3002\u8BF7\u4F7F\u7528 --passwordfile \u9009\u9879\u6216 asadmin login \u547D\u4EE4\u3002
#EN commands.monitor.press_to_quit=Press 'q' or 'Q' to quit.
commands.monitor.press_to_quit=\u6309 'q' \u6216 'Q' \u952E\u9000\u51FA\u3002
#EN InvalidRemoteCommand=No such local command, {0}. To run remote commands, start the application server (e.g. ''asadmin start-domain'').
InvalidRemoteCommand=\u65E0\u6B64\u7C7B\u672C\u5730\u547D\u4EE4{0}\u3002\u8981\u8FD0\u884C\u8FDC\u7A0B\u547D\u4EE4, \u8BF7\u542F\u52A8\u5E94\u7528\u7A0B\u5E8F\u670D\u52A1\u5668 (\u4F8B\u5982 ''asadmin start-domain'')\u3002
#EN NoAdminPort=Cannot find admin port in domain.xml file
NoAdminPort=\u5728 domain.xml \u6587\u4EF6\u4E2D\u627E\u4E0D\u5230\u7BA1\u7406\u7AEF\u53E3
#EN NoAdminPortEx=Cannot find admin port in domain.xml file, caused by:\n {0}
NoAdminPortEx=\u5728 domain.xml \u6587\u4EF6\u4E2D\u627E\u4E0D\u5230\u7BA1\u7406\u7AEF\u53E3, \u539F\u56E0:\n {0}
## monitor command
#EN monitorCommand.errorRemote=Error encountered when making remote call: {0}
monitorCommand.errorRemote=\u6267\u884C\u8FDC\u7A0B\u8C03\u7528\u65F6\u51FA\u9519: {0}
#EN monitor.jvm.title=JVM Monitoring
monitor.jvm.title=JVM \u76D1\u89C6
#EN monitor.jvm.uptime.title=UpTime(ms)
monitor.jvm.uptime.title=\u6B63\u5E38\u8FD0\u884C\u65F6\u95F4 (\u6BEB\u79D2)
#EN monitor.jvm.memory.title=Heap and NonHeap Memory(bytes)
monitor.jvm.memory.title=\u5806\u5185\u5B58\u548C\u975E\u5806\u5185\u5B58 (\u5B57\u8282)
#EN monitor.jvm.current=current
monitor.jvm.current=\u5F53\u524D
#EN monitor.jvm.min=min
monitor.jvm.min=\u6700\u5C0F
#EN monitor.jvm.max=max
monitor.jvm.max=\u6700\u5927
#EN monitor.jvm.low=low
monitor.jvm.low=\u4F4E
#EN monitor.jvm.high=high
monitor.jvm.high=\u9AD8
#EN monitor.jvm.count=count
monitor.jvm.count=\u8BA1\u6570
#EN commands.monitor.webmodule_virtual_server_detail=*******************************************************************************\n* ajlc = Number of active JSP pages *\n* asc = Number of currently active sessions *\n* aslc = Number of active servlets that are loaded *\n* ast = Total number of sessions ever activated *\n* mjlc = Maximum number of JSP pages that are loaded *\n* mslc = Maximum number of servlets that are loaded *\n* rst = Total number of rejected sessions *\n* st = Total number of sessions created *\n* tjlc = Total number of JSP pages that are loaded *\n* tslc = Total number of servlets that are loaded *\n*******************************************************************************
commands.monitor.webmodule_virtual_server_detail=*******************************************************************************\n* ajlc = \u6D3B\u52A8 JSP \u9875\u6570\u76EE *\n* asc = \u5F53\u524D\u6D3B\u52A8\u4F1A\u8BDD\u6570\u76EE *\n* aslc = \u52A0\u8F7D\u7684\u6D3B\u52A8 servlet \u6570\u76EE *\n* ast = \u6FC0\u6D3B\u8FC7\u7684\u4F1A\u8BDD\u7684\u603B\u6570 *\n* mjlc = \u52A0\u8F7D\u7684 JSP \u9875\u7684\u6700\u5927\u6570\u76EE *\n* mslc = \u52A0\u8F7D\u7684 servlet \u7684\u6700\u5927\u6570\u76EE *\n* rst = \u62D2\u7EDD\u7684\u4F1A\u8BDD\u603B\u6570 *\n* st = \u521B\u5EFA\u7684\u4F1A\u8BDD\u603B\u6570 *\n* tjlc = \u52A0\u8F7D\u7684 JSP \u9875\u603B\u6570 *\n* tslc = \u52A0\u8F7D\u7684 servlet \u603B\u6570 *\n*******************************************************************************
#EN commands.monitor.servlet_detail=*******************************************************************************\n* aslc = Number of active servlets that are loaded *\n* mslc = Maximum number of servlets that are loaded *\n* tslc = Total number of servlets that are loaded *\n*******************************************************************************
commands.monitor.servlet_detail=*******************************************************************************\n* aslc = \u52A0\u8F7D\u7684\u6D3B\u52A8 servlet \u6570\u76EE *\n* mslc = \u52A0\u8F7D\u7684 servlet \u7684\u6700\u5927\u6570\u76EE *\n* tslc = \u52A0\u8F7D\u7684 servlet \u603B\u6570 *\n*******************************************************************************
#EN commands.monitor.httplistener_detail=*******************************************************************************\n* ec = Cumulative value of the error count. An error represents a response *\n* code greater than or equal to 400. *\n* mt = Longest response time for a request - not a cumulative value, but the *\n* largest response time from among the response times. *\n* pt = Cumulative value of the times taken to process each request. The *\n* processing time is the average of request processing times over the *\n* request count. *\n* rc = Cumulative number of the requests processed so far. *\n*******************************************************************************
commands.monitor.httplistener_detail=*******************************************************************************\n* ec = \u9519\u8BEF\u8BA1\u6570\u7D2F\u79EF\u503C\u3002\u9519\u8BEF\u8868\u793A\u54CD\u5E94\u4EE3\u7801\u5927\u4E8E\u7B49\u4E8E *\n* 400\u3002 *\n* mt = \u67D0\u4E2A\u8BF7\u6C42\u7684\u6700\u957F\u54CD\u5E94\u65F6\u95F4 - \u4E0D\u662F\u7D2F\u79EF\u503C, \u800C\u662F *\n* \u591A\u4E2A\u54CD\u5E94\u65F6\u95F4\u4E2D\u6700\u957F\u7684\u54CD\u5E94\u65F6\u95F4\u3002*\n* pt = \u5904\u7406\u6BCF\u4E2A\u8BF7\u6C42\u6240\u82B1\u8D39\u7684\u65F6\u95F4\u7684\u7D2F\u79EF\u503C\u3002\u5904\u7406\u65F6\u95F4 *\n* \u662F\u6240\u6709\u8BF7\u6C42\u5904\u7406\u65F6\u95F4\u9664\u4EE5\u8BF7\u6C42\u8BA1\u6570\u7684 *\n* \u5E73\u5747\u503C\u3002 *\n* rc = \u5230\u73B0\u5728\u4E3A\u6B62\u5904\u7406\u7684\u8BF7\u6C42\u7684\u7D2F\u79EF\u6570\u3002*\n*******************************************************************************
#EN remote.version.failed.non-debug=Version string could not be obtained from Server [{0}:{1}] for some reason.\n(Turn debugging on e.g. by setting AS_DEBUG=true in your environment, to see the details).
remote.version.failed.non-debug=\u7531\u4E8E\u67D0\u79CD\u539F\u56E0, \u65E0\u6CD5\u4ECE\u670D\u52A1\u5668 [{0}:{1}] \u83B7\u53D6\u7248\u672C\u5B57\u7B26\u4E32\u3002\n(\u8BF7\u542F\u7528\u8C03\u8BD5, \u4F8B\u5982\u5728\u73AF\u5883\u4E2D\u8BBE\u7F6E AS_DEBUG=true, \u4EE5\u67E5\u770B\u8BE6\u7EC6\u4FE1\u606F\u3002)
#EN remote.version.failed.debug=Version string could not be obtained from Server [{0}:{1}] for following reason.
remote.version.failed.debug=\u7531\u4E8E\u4EE5\u4E0B\u539F\u56E0, \u65E0\u6CD5\u4ECE\u670D\u52A1\u5668 [{0}:{1}] \u83B7\u53D6\u7248\u672C\u5B57\u7B26\u4E32\u3002
#EN version.local=Using locally retrieved version string from version class.\nVersion = {0}
version.local=\u4F7F\u7528\u4ECE version \u7C7B\u901A\u8FC7\u672C\u5730\u68C0\u7D22\u5F97\u5230\u7684\u7248\u672C\u5B57\u7B26\u4E32\u3002\n\u7248\u672C = {0}
# do not translate Java Runtime Environment
#EN version.local.java=asadmin Java Runtime Environment version: {0}
version.local.java=asadmin Java Runtime Environment \u7248\u672C: {0}
#EN version.remote=Version = {0}
version.remote=\u7248\u672C = {0}
#EN version.optionerror1=Specify terse or verbose but not both.
version.optionerror1=\u6307\u5B9A terse \u6216 verbose, \u4F46\u4E0D\u80FD\u540C\u65F6\u6307\u5B9A\u4E24\u8005\u3002
#EN awt.error=Unable to process auto quit because of awt exception {0}
awt.error=\u65E0\u6CD5\u8FDB\u884C\u81EA\u52A8\u9000\u51FA, \u56E0\u4E3A\u51FA\u73B0\u4E86 awt \u5F02\u5E38\u9519\u8BEF{0}
## restart-domain
#EN restart=Restarting Domain...
restart=\u6B63\u5728\u91CD\u65B0\u542F\u52A8\u57DF...
#EN restart.dasNotRunning=Server is not running, will attempt to start it...
restart.dasNotRunning=\u670D\u52A1\u5668\u672A\u8FD0\u884C, \u5C06\u5C1D\u8BD5\u542F\u52A8\u670D\u52A1\u5668...
#EN restart.dasNotRunningNoRestart=Remote server is not running, can not restart it
restart.dasNotRunningNoRestart=\u8FDC\u7A0B\u670D\u52A1\u5668\u672A\u8FD0\u884C, \u65E0\u6CD5\u91CD\u65B0\u542F\u52A8\u5B83
#EN restartDomain.noGFStart=Timed out waiting for the server to restart
restartDomain.noGFStart=\u7B49\u5F85\u670D\u52A1\u5668\u91CD\u65B0\u542F\u52A8\u65F6\u8D85\u65F6
#EN restartDomain.success=Successfully restarted the domain
restartDomain.success=\u5DF2\u6210\u529F\u91CD\u65B0\u542F\u52A8\u57DF
#EN restartChangeDebug=Restarting Domain and explicitly setting debug to {0}...
restartChangeDebug=\u6B63\u5728\u91CD\u65B0\u542F\u52A8\u57DF\u5E76\u5C06\u8C03\u8BD5\u663E\u5F0F\u8BBE\u7F6E\u4E3A{0}...
#EN restartDomain.notRestartable=The domain reports that it is not restartable. \n\
#EN This usually means that the password file that was originally used to start the server \
#EN has been deleted or is not readable now.\n\
#EN Please stop and then restart the server - or fix the password file.
restartDomain.notRestartable=\u8BE5\u57DF\u62A5\u544A\u5B83\u4E0D\u53EF\u91CD\u65B0\u542F\u52A8\u3002\n\u8FD9\u901A\u5E38\u8868\u793A\u6700\u521D\u7528\u4E8E\u542F\u52A8\u8BE5\u670D\u52A1\u5668\u7684\u53E3\u4EE4\u6587\u4EF6\u5DF2\u5220\u9664\u6216\u8005\u73B0\u5728\u4E0D\u53EF\u8BFB\u3002\n\u8BF7\u505C\u6B62\u5E76\u91CD\u65B0\u542F\u52A8\u8BE5\u670D\u52A1\u5668\u6216\u4FEE\u590D\u8BE5\u53E3\u4EE4\u6587\u4EF6\u3002
## change-admin-password
#EN AdminUserDefaultPrompt=Enter admin user name [default: {0}]>
AdminUserDefaultPrompt=\u8F93\u5165\u7BA1\u7406\u5458\u7528\u6237\u540D [\u9ED8\u8BA4\u4E3A: {0}]>
#EN AdminUserRequired=Must specify an admin user (e.g., using the --user option).
AdminUserRequired=\u5FC5\u987B\u6307\u5B9A\u7BA1\u7406\u5458\u7528\u6237 (\u4F8B\u5982, \u4F7F\u7528 --user \u9009\u9879)\u3002
#EN LocalRemoteCommand.errorRemote=Error encountered while making remote call: {0}
LocalRemoteCommand.errorRemote=\u6267\u884C\u8FDC\u7A0B\u8C03\u7528\u65F6\u51FA\u9519: {0}
#EN unknownOption=Command {0} does not have an option {1}
unknownOption=\u547D\u4EE4{0}\u6CA1\u6709\u9009\u9879{1}
#EN notEnoughOperands=Command {0} requires an operand of type {1}
notEnoughOperands=\u547D\u4EE4{0}\u9700\u8981{1}\u7C7B\u578B\u7684\u64CD\u4F5C\u6570
#EN noOperandsAllowed=Command {0} does not accept any operands
noOperandsAllowed=\u547D\u4EE4{0}\u4E0D\u63A5\u53D7\u4EFB\u4F55\u64CD\u4F5C\u6570
#EN tooManyOperands1=Command {0} only accepts one operand
tooManyOperands1=\u547D\u4EE4{0}\u53EA\u63A5\u53D7\u4E00\u4E2A\u64CD\u4F5C\u6570
#EN tooManyOperands=Command {0} only accepts {1} operands
tooManyOperands=\u547D\u4EE4{0}\u53EA\u63A5\u53D7 {1} \u4E2A\u64CD\u4F5C\u6570
#EN missingPassword=Command {0} requires a password named {1}
missingPassword=\u547D\u4EE4{0}\u9700\u8981\u540D\u4E3A{1}\u7684\u53E3\u4EE4
#EN missingPasswordAdvice=Command {0} requires a password named {1}\nAdd a line of the following form to a password file:\n{1}=yourpassword\nSpecify that password file to asadmin with the --passwordfile opton.
missingPasswordAdvice=\u547D\u4EE4{0}\u9700\u8981\u4E00\u4E2A\u540D\u4E3A{1}\u7684\u53E3\u4EE4\n\u8BF7\u6309\u4EE5\u4E0B\u683C\u5F0F\u5728\u53E3\u4EE4\u6587\u4EF6\u4E2D\u6DFB\u52A0\u4E00\u884C:\n{1}=yourpassword\n\u5728 asadmin \u4E2D\u4F7F\u7528 --passwordfile \u9009\u9879\u6307\u5B9A\u8BE5\u53E3\u4EE4\u6587\u4EF6\u3002
#EN missingOption=Option {0} is required but was not specified
missingOption=\u9700\u8981\u9009\u9879{0}, \u4F46\u672A\u6307\u5B9A
#EN missingOptions=Command {0} is missing required options
missingOptions=\u547D\u4EE4{0}\u7F3A\u5C11\u5FC5\u9700\u7684\u9009\u9879
#EN ManpagePrompt=--MORE--
ManpagePrompt=--MORE--
#EN ManpageQuit=q
ManpageQuit=q
#EN ManpageMissing=Cannot find man page for command: {0}
ManpageMissing=\u65E0\u6CD5\u627E\u5230\u547D\u4EE4{0}\u7684\u624B\u518C\u9875
#EN multimodeIntro=Use "exit" to exit and "help" for online help.
multimodeIntro=\u4F7F\u7528 "exit" \u4EE5\u9000\u51FA, \u4F7F\u7528 "help" \u4EE5\u83B7\u5F97\u8054\u673A\u5E2E\u52A9\u3002
#EN badEnvVarSet=CLI148 Could not set environment variable: {0}\nVariable names must start with "AS_ADMIN_".
badEnvVarSet=CLI148 \u65E0\u6CD5\u8BBE\u7F6E\u73AF\u5883\u53D8\u91CF: {0}\n\u53D8\u91CF\u540D\u79F0\u5FC5\u987B\u4EE5 "AS_ADMIN_" \u5F00\u5934\u3002
#EN badEnvVarUnset=CLI163 Could not unset environment variable: {0}\nVariable names must start with "AS_ADMIN_".
badEnvVarUnset=CLI163 \u65E0\u6CD5\u53D6\u6D88\u8BBE\u7F6E\u73AF\u5883\u53D8\u91CF: {0}\n\u53D8\u91CF\u540D\u79F0\u5FC5\u987B\u4EE5 "AS_ADMIN_" \u5F00\u5934\u3002
#EN cantRemoveEnvVar=CLI149 Environment variable is not set: {0}
cantRemoveEnvVar=CLI149 \u73AF\u5883\u53D8\u91CF\u672A\u8BBE\u7F6E: {0}
#EN operandPrompt=Enter the value for the {0} operand>
operandPrompt=\u8BF7\u8F93\u5165{0}\u64CD\u4F5C\u6570\u7684\u503C>
#EN optionPrompt=Enter the value for the {0} option>
optionPrompt=\u8BF7\u8F93\u5165{0}\u9009\u9879\u7684\u503C>
#EN OldJdk=GlassFish requires Java SE version 6. Your JDK is version {0}
OldJdk=GlassFish \u9700\u8981 Java SE \u7B2C 6 \u7248\u3002\u60A8\u7684 JDK \u7248\u672C\u4E3A{0}
#EN DeprecatedSyntax=Deprecated syntax, instead use:
DeprecatedSyntax=\u8BED\u6CD5\u5DF2\u8FC7\u65F6, \u8BF7\u6539\u7528:
## Parser
#EN parser.noValueAllowed=Option may not have value: {0}
parser.noValueAllowed=\u9009\u9879\u4E0D\u80FD\u6709\u4EE5\u4E0B\u503C: {0}
#EN parser.illegalNo="--no" illegal with non-boolean option: {0}
parser.illegalNo="--no" \u4E0D\u80FD\u4E0E\u975E\u5E03\u5C14\u503C\u9009\u9879{0}\u4E00\u8D77\u4F7F\u7528
#EN parser.invalidOption=Invalid option: {0}
parser.invalidOption=\u9009\u9879\u65E0\u6548: {0}
#EN parser.nonbooleanNotAllowed=Non-boolean option: {0}, not allowed in argument: {1}
parser.nonbooleanNotAllowed=\u975E\u5E03\u5C14\u503C\u9009\u9879: {0}, \u4E0D\u5141\u8BB8\u7528\u4E8E\u53C2\u6570: {1}
#EN parser.missingValue=Missing value for option: {0}
parser.missingValue=\u9009\u9879{0}\u7F3A\u5C11\u503C
#EN parser.invalidFileEx=Invalid file for option: --{0}: {1}
parser.invalidFileEx=\u9009\u9879 --{0}: {1}\u7684\u6587\u4EF6\u65E0\u6548
#EN parser.invalidFile=Invalid file for option: {0}, File: {1}
parser.invalidFile=\u9009\u9879{0}\u7684\u6587\u4EF6\u65E0\u6548, \u6587\u4EF6: {1}
#EN parser.invalidBoolean=Invalid boolean value for option: {0}, Value: {1}
parser.invalidBoolean=\u9009\u9879{0}\u7684\u5E03\u5C14\u503C\u65E0\u6548, \u503C: {1}
#EN parser.passwordNotAllowed=Password not allowed on command line: {0}
parser.passwordNotAllowed=\u4E0D\u5141\u8BB8\u5728\u547D\u4EE4\u884C\u4E0A\u4F7F\u7528\u53E3\u4EE4: {0}
#EN parser.noRepeats=Repeats not allowed for option: {0}
parser.noRepeats=\u4E0D\u5141\u8BB8\u91CD\u590D\u4F7F\u7528\u9009\u9879: {0}
## ArgumentTokenizer
#EN stopwatch=Total Time to Launch: {0} msec
stopwatch=\u542F\u52A8\u603B\u65F6\u95F4: {0} \u6BEB\u79D2
#EN token.unbalancedQuotes=Unbalanced quotes
token.unbalancedQuotes=\u5F15\u53F7\u4E0D\u6210\u5BF9
#EN token.escapeAtEOL=Escape at end of line
token.escapeAtEOL=\u884C\u5C3E\u9000\u51FA
#EN token.noMoreTokens=No more tokens
token.noMoreTokens=\u6CA1\u6709\u66F4\u591A\u7684\u6807\u8BB0
#EN deathwait_timeout=Waited {0} milliseconds for the server to die. It did not die. Can not restart. Please kill it manually.
deathwait_timeout=\u7B49\u5F85\u670D\u52A1\u5668\u7EC8\u6B62\u7684\u65F6\u95F4\u5DF2\u6709 {0} \u6BEB\u79D2\u3002\u670D\u52A1\u5668\u672A\u7EC8\u6B62\u3002\u65E0\u6CD5\u91CD\u65B0\u542F\u52A8\u3002\u8BF7\u624B\u52A8\u7EC8\u6B62\u670D\u52A1\u5668\u3002
#EN runscript.badport=Bad httpport argument({0}). It must be an integer between 1 and 65535 inclusive.
runscript.badport=\u9519\u8BEF\u7684 httpport \u53C2\u6570 ({0})\u3002\u5FC5\u987B\u662F 1 \u548C 65535 (\u542B) \u4E4B\u95F4\u7684\u6574\u6570\u3002
#EN runscript.noscriptname=The java script filename is required.
runscript.noscriptname=\u9700\u8981 java \u811A\u672C\u6587\u4EF6\u540D\u3002
#EN runscript.badscriptname=The java script filename({0}) does not exist.
runscript.badscriptname=java \u811A\u672C\u6587\u4EF6\u540D ({0}) \u4E0D\u5B58\u5728\u3002
#EN internal_error=Internal Error: {0}
internal_error=\u5185\u90E8\u9519\u8BEF: {0}
#EN DAS=Domain Administration Server
DAS=\u57DF\u7BA1\u7406\u670D\u52A1\u5668
#EN INSTANCE=Instance Server
INSTANCE=\u5B9E\u4F8B\u670D\u52A1\u5668
#EN serverNoStart=No response from the {0} ({1}) after {2} seconds.\n\
#EN The command is either taking too long to complete or the server has failed.\n\
#EN Please see the server log files for command status. \n\
#EN Please start with the --verbose option in order to see early messages.
serverNoStart={0} ({1}) \u5728 {2} \u79D2\u540E\u672A\u4F5C\u51FA\u54CD\u5E94\u3002\n\u547D\u4EE4\u8017\u65F6\u592A\u957F\u4EE5\u81F4\u65E0\u6CD5\u5B8C\u6210, \u6216\u670D\u52A1\u5668\u5DF2\u5931\u8D25\u3002\n\u8BF7\u67E5\u770B\u670D\u52A1\u5668\u65E5\u5FD7\u6587\u4EF6\u4E86\u89E3\u547D\u4EE4\u72B6\u6001\u3002\n\u8BF7\u5728\u5F00\u59CB\u65F6\u4F7F\u7528 --verbose \u9009\u9879, \u4EE5\u4FBF\u67E5\u770B\u65E9\u671F\u7684\u6D88\u606F\u3002
#EN dry_run_msg=Dump of JVM Invocation line that would be used to launch:
dry_run_msg=\u5C06\u7528\u4E8E\u542F\u52A8\u7684 JVM \u8C03\u7528\u884C\u7684\u8F6C\u50A8:
© 2015 - 2025 Weber Informatics LLC | Privacy Policy