javax.xml.bind.attachment.AttachmentMarshaller Maven / Gradle / Ivy
Show all versions of webservices-api Show documentation
/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright (c) 2005-2011 Oracle and/or its affiliates. All rights reserved.
*
* The contents of this file are subject to the terms of either the GNU
* General Public License Version 2 only ("GPL") or the Common Development
* and Distribution License("CDDL") (collectively, the "License"). You
* may not use this file except in compliance with the License. You can
* obtain a copy of the License at
* https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
* or packager/legal/LICENSE.txt. See the License for the specific
* language governing permissions and limitations under the License.
*
* When distributing the software, include this License Header Notice in each
* file and include the License file at packager/legal/LICENSE.txt.
*
* GPL Classpath Exception:
* Oracle designates this particular file as subject to the "Classpath"
* exception as provided by Oracle in the GPL Version 2 section of the License
* file that accompanied this code.
*
* Modifications:
* If applicable, add the following below the License Header, with the fields
* enclosed by brackets [] replaced by your own identifying information:
* "Portions Copyright [year] [name of copyright owner]"
*
* Contributor(s):
* If you wish your version of this file to be governed by only the CDDL or
* only the GPL Version 2, indicate your decision by adding "[Contributor]
* elects to include this software in this distribution under the [CDDL or GPL
* Version 2] license." If you don't indicate a single choice of license, a
* recipient has the option to distribute your version of this file under
* either the CDDL, the GPL Version 2 or to extend the choice of license to
* its licensees as provided above. However, if you add GPL Version 2 code
* and therefore, elected the GPL Version 2 license, then the option applies
* only if the new code is made subject to such option by the copyright
* holder.
*/
package javax.xml.bind.attachment;
import javax.activation.DataHandler;
import javax.xml.bind.Marshaller;
/**
* Enable JAXB marshalling to optimize storage of binary data.
*
* This API enables an efficient cooperative creation of optimized
* binary data formats between a JAXB marshalling process and a MIME-based package
* processor. A JAXB implementation marshals the root body of a MIME-based package,
* delegating the creation of referenceable MIME parts to
* the MIME-based package processor that implements this abstraction.
*
* XOP processing is enabled when {@link #isXOPPackage()} is true.
* See {@link #addMtomAttachment(DataHandler, String, String)} for details.
*
*
* WS-I Attachment Profile 1.0 is supported by
* {@link #addSwaRefAttachment(DataHandler)} being called by the
* marshaller for each JAXB property related to
* {http://ws-i.org/profiles/basic/1.1/xsd}swaRef.
*
*
* @author Marc Hadley
* @author Kohsuke Kawaguchi
* @author Joseph Fialli
* @since JAXB 2.0
*
* @see Marshaller#setAttachmentMarshaller(AttachmentMarshaller)
*
* @see XML-binary Optimized Packaging
* @see WS-I Attachments Profile Version 1.0.
*/
public abstract class AttachmentMarshaller {
/**
* Consider MIME content data for optimized binary storage as an attachment.
*
*
* This method is called by JAXB marshal process when {@link #isXOPPackage()} is
* true, for each element whose datatype is "base64Binary", as described in
* Step 3 in
* Creating XOP Packages.
*
*
* The method implementor determines whether data shall be attached separately
* or inlined as base64Binary data. If the implementation chooses to optimize the storage
* of the binary data as a MIME part, it is responsible for attaching data to the
* MIME-based package, and then assigning an unique content-id, cid, that identifies
* the MIME part within the MIME message. This method returns the cid,
* which enables the JAXB marshaller to marshal a XOP element that refers to that cid in place
* of marshalling the binary data. When the method returns null, the JAXB marshaller
* inlines data as base64binary data.
*
*
* The caller of this method is required to meet the following constraint.
* If the element infoset item containing data has the attribute
* xmime:contentType or if the JAXB property/field representing
* datais annotated with a known MIME type,
* data.getContentType() should be set to that MIME type.
*
*
* The elementNamespace and elementLocalName
* parameters provide the
* context that contains the binary data. This information could
* be used by the MIME-based package processor to determine if the
* binary data should be inlined or optimized as an attachment.
*
* @param data
* represents the data to be attached. Must be non-null.
* @param elementNamespace
* the namespace URI of the element that encloses the base64Binary data.
* Can be empty but never null.
* @param elementLocalName
* The local name of the element. Always a non-null valid string.
*
* @return
* a valid content-id URI (see RFC 2387) that identifies the attachment containing data.
* Otherwise, null if the attachment was not added and should instead be inlined in the message.
*
* @see XML-binary Optimized Packaging
* @see Describing Media Content of Binary Data in XML
*/
public abstract String addMtomAttachment(DataHandler data, String elementNamespace, String elementLocalName);
/**
*
Consider binary data for optimized binary storage as an attachment.
*
*
Since content type is not known, the attachment's MIME content type must be set to "application/octet-stream".
*
*
* The elementNamespace and elementLocalName
* parameters provide the
* context that contains the binary data. This information could
* be used by the MIME-based package processor to determine if the
* binary data should be inlined or optimized as an attachment.
*
* @param data
* represents the data to be attached. Must be non-null. The actual data region is
* specified by (data,offset,length) tuple.
*
* @param offset
* The offset within the array of the first byte to be read;
* must be non-negative and no larger than array.length
*
* @param length
* The number of bytes to be read from the given array;
* must be non-negative and no larger than array.length
*
* @param mimeType
* If the data has an associated MIME type known to JAXB, that is passed
* as this parameter. If none is known, "application/octet-stream".
* This parameter may never be null.
*
* @param elementNamespace
* the namespace URI of the element that encloses the base64Binary data.
* Can be empty but never null.
*
* @param elementLocalName
* The local name of the element. Always a non-null valid string.
*
* @return content-id URI, cid, to the attachment containing
* data or null if data should be inlined.
*
* @see #addMtomAttachment(DataHandler, String, String)
*/
public abstract String addMtomAttachment(byte[] data, int offset, int length, String mimeType, String elementNamespace, String elementLocalName);
/**
*
Read-only property that returns true if JAXB marshaller should enable XOP creation.
*
* This value must not change during the marshalling process. When this
* value is true, the addMtomAttachment(...) method
* is invoked when the appropriate binary datatypes are encountered by
* the marshal process.
*
* Marshaller.marshal() must throw IllegalStateException if this value is true
* and the XML content to be marshalled violates Step 1 in
* Creating XOP Pacakges
* http://www.w3.org/TR/2005/REC-xop10-20050125/#creating_xop_packages.
* "Ensure the Original XML Infoset contains no element information item with a
* [namespace name] of "http://www.w3.org/2004/08/xop/include" and a [local name] of Include"
*
*
When this method returns true and during the marshal process
* at least one call to addMtomAttachment(...) returns
* a content-id, the MIME-based package processor must label the
* root part with the application/xop+xml media type as described in
* Step 5 of
* Creating XOP Pacakges.
*
* @return true when MIME context is a XOP Package.
*/
public boolean isXOPPackage() { return false; }
/**
*
Add MIME data as an attachment and return attachment's content-id, cid.
*
*
* This method is called by JAXB marshal process for each element/attribute typed as
* {http://ws-i.org/profiles/basic/1.1/xsd}swaRef. The MIME-based package processor
* implementing this method is responsible for attaching the specified data to a
* MIME attachment, and generating a content-id, cid, that uniquely identifies the attachment
* within the MIME-based package.
*
*
Caller inserts the returned content-id, cid, into the XML content being marshalled.
*
* @param data
* represents the data to be attached. Must be non-null.
* @return
* must be a valid URI used as cid. Must satisfy Conformance Requirement R2928 from
* WS-I Attachments Profile Version 1.0.
*/
public abstract String addSwaRefAttachment(DataHandler data);
}