com.sun.xml.wss.logging.LogStrings.properties Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of webservices-rt Show documentation
Show all versions of webservices-rt Show documentation
This module contains the Metro runtime code.
#
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
#
# Copyright (c) 2010-2017 Oracle and/or its affiliates. All rights reserved.
#
# The contents of this file are subject to the terms of either the GNU
# General Public License Version 2 only ("GPL") or the Common Development
# and Distribution License("CDDL") (collectively, the "License"). You
# may not use this file except in compliance with the License. You can
# obtain a copy of the License at
# https://oss.oracle.com/licenses/CDDL+GPL-1.1
# or LICENSE.txt. See the License for the specific
# language governing permissions and limitations under the License.
#
# When distributing the software, include this License Header Notice in each
# file and include the License file at LICENSE.txt.
#
# GPL Classpath Exception:
# Oracle designates this particular file as subject to the "Classpath"
# exception as provided by Oracle in the GPL Version 2 section of the License
# file that accompanied this code.
#
# Modifications:
# If applicable, add the following below the License Header, with the fields
# enclosed by brackets [] replaced by your own identifying information:
# "Portions Copyright [year] [name of copyright owner]"
#
# Contributor(s):
# If you wish your version of this file to be governed by only the CDDL or
# only the GPL Version 2, indicate your decision by adding "[Contributor]
# elects to include this software in this distribution under the [CDDL or GPL
# Version 2] license." If you don't indicate a single choice of license, a
# recipient has the option to distribute your version of this file under
# either the CDDL, the GPL Version 2 or to extend the choice of license to
# its licensees as provided above. However, if you add GPL Version 2 code
# and therefore, elected the GPL Version 2 license, then the option applies
# only if the new code is made subject to such option by the copyright
# holder.
#
#Logging Error codes
#config from 100 to 120
WSS0100.createFor.creating.impl=WSS0100: Method Processor.createFor creating instance of {0}
#Filter Messages from 121 to 299
#WSS0121.no.jce.provider=WSS0121: Unable to locate a JCE provider for {0}
WSS0126.unsupported.privatekey.type=WSS0126: Unsupported PrivateKey type
WSS0126.diag.cause.1=Unsupported algorithm type. Only RSA supported.
WSS0126.diag.check.1=Check that the signature algorithm is RSA
WSS0127.unableto.sign.message=WSS0127: Unable to sign message
WSS0128.unableto.encrypt.message=WSS0128: Unable to encrypt element
WSS0129.no.dssignature.in.security.headerblock=WSS0129: Could not retrieve the ds:Signature element from the wsse:Security header block, got Exception [ {0} ]
WSS0129.diag.cause.1=Malformed message ds:Signature element missing from the wsse:Security header block
WSS0129.diag.check.1=Check proper signature was generated while signing
WSS0131.dskeyinfo.doesnot.contain.refto.sectoken=WSS0131: Message ds:KeyInfo does not contain a reference to a security token
WSS0133.exception.while.verifying.signature=WSS0133: Exception [ {0} ] while verifying signature
WSS0134.unableto.initialize.xml.cipher=WSS0134: Unable to initialize XML Cipher
WSS0134.diag.cause.1=Unable to Initialize XMLCipher with the given Key
WSS0134.diag.check.1=Check that the XMLCipher was initialized properly
WSS0135.unableto.encrypt.symmetric.key=WSS0135: Exception [ {0} ] while trying to encrypt symmetric key
WSS0137.unableto.decrypt.message=WSS0137: Exception [ {0} ] while trying to decrypt message
WSS0137.diag.cause.1=An appropriate JCE provider is not configured in the JRE
WSS0137.diag.check.1=Look at root exception for more clues
WSS0138.unableto.find.wsse.keyidentifier=WSS0138: Unable to find wsse:KeyIdentifier
WSS0139.unableto.find.matching.privatekey=WSS0139: Exception [ {0} ] while trying to find matching PrivateKey
WSS0140.encryptedkey.doesnot.contain.chiperdata=WSS0140: Message xenc:EncryptedKey does not contain xenc:CipherData/xenc:CipherValue
WSS0141.unableto.decrypt.symmetric.key=WSS0141: Exception [ {0} ] while trying to decrypt symmetric key
WSS0144.unableto.decode.base64.data=WSS0144: Exception [ {0} ] while trying to decode Base64 encoded data
WSS0144.diag.cause.1=Base64Decoding exception is the root cause
WSS0144.diag.check.1=Check that the data is valid base64 encoded
WSS0147.unableto.use.stylesheet=WSS0147: Exception [ {0} ] while trying to use stylesheet
WSS0147.diag.cause.1=TransformationConfiguration exception while trying to use stylesheet to pretty print
WSS0147.diag.check.1=Make sure style sheet is valid
WSS0148.unableto.process.soapmessage=WSS0148: Exception [ {0} ] while processing SOAPMessage
WSS0148.diag.cause.1=Exception while trying to pretty print using transform
WSS0148.diag.check.1=Make sure the original SOAP Message and style sheet are both correct
WSS0156.exception.in.cert.validate=WSS0156: Exception [ {0} ] while validating certificate
WSS0156.diag.cause.1=Error in certificate used for validation
WSS0156.diag.check.1=Check that the token contains a valid Certificate
WSS0161.unableto.find.matching.privatekey=WSS0161: Unable to find matching PrivateKey
WSS0165.unable.to.encrypt=WSS0165: XPath does not correspond to a DOM Element
WSS0165.diag.cause.1=XPath does not correspond to a DOM element
WSS0165.diag.check.1=Check that the node represented by the XPath is a valid DOM element
WSS0166.no.binary.security.token.in.header=WSS0166: Could not retrieve a Binary Security Token needed for Verifying the Signature from the wsse:Security header, got Exception [ {0} ]
WSS0167.signature.verification.failed=WSS0167: Signature Verification Failed
WSS0167.diag.cause.1=Invalid signature; verification failed
WSS0167.diag.check.1=Make sure the signature was not tampered with in transit
WSS0168.failedto.generate.random.symmetrickey=WSS0168: Exception [ {0} ] when trying to generate random symmetric key
WSS0168.diag.cause.1=Unable to generate a random symmetric key
WSS0168.diag.check.1=Verify that the KeyGenerator has been properly initialized
WSS0169.token.not.set.parameter.list=WSS0169: Token to be exported was not set in the Parameter List
WSS0169.diag.cause.1=Value of FilterParameterConstants.BINARY_SEC_TOKEN is not set
WSS0169.diag.check.1=Check that direct reference strategy is set before exporting the certificate
WSS0181.subject.not.authorized=WSS0181: Subject [ {0} ] is not an authorized subject
WSS0181.diag.cause.1=Subject not authorized; validation failed
WSS0181.diag.check.1=Check that the user is authorized
WSS0182.referencelist.parameter.null=WSS0182: The xenc:Referencelist parameter required by DecryptReferenceList filter is null.
WSS0182.diag.cause.1=FilterParameterConstants.REFERENCE_LIST parameter has a null value
WSS0182.diag.check.1=The reference list that needs to be decrypted usually set by ImportEncryptedKeyFilter
WSS0183.couldnot.locate.symmetrickey=WSS0183: The symmetric key required for decryption was not found.
WSS0183.diag.cause.1=Could not locate a valid symmetric key needed for decryption.
WSS0183.diag.check.1=Value of symmetric key seems to be null. Check its value.
WSS0184.securitydomain.null=WSS0184: Security Domain not set of Message
WSS0184.diag.cause.1=Could not retrieve security domain from the Securable SOAP message
WSS0184.diag.check.1=Make sure the SecurityEnvironment factory has set the right security environment.
WSS0185.filterparameter.not.set=WSS0185: filter parameter [ {0} ] was not set
WSS0185.diag.cause.1=Could not find the certificate associated with the direct reference strategy
WSS0185.diag.check.1=Check that the URI is valid and subjectkeyidentifier parameter is set in configuration
WSS0186.certificate.not.found=WSS0186: No key identifier was set (implicitly or explicitly) and no certificate could be found on the calling thread.
WSS0187.prefix.null=WSS0187: Prefix cannot be null
WSS0187.diag.cause.1=Cannot instantiate/initialize filter with null prefix
WSS0188.prefix.null=WSS0188: Namespace cannot be null
WSS0188.diag.cause.1=Cannot instantiate/initialize filter with null namespace
WSS0189.unsupported.data.decryption.algorithm=WSS0189: Unsupported data decryption algorithm
WSS0189.diag.cause.1=Data decryption algorithm has to be either Triple-DES, AES128-CBC, AES256-CBC
WSS0189.diag.check.1=Check that the encryption algorithm used is either 3DES, AES128_CBC, AES256_CBC
WSS0190.encryption.requirements.not.met=WSS0190: The number of elements encrypted is less than required/allowed
WSS0190.diag.cause.1=The number of elements encrypted is less than required/allowed
WSS0190.diag.check.1=Check that the data references for encryption (in message) match the requirements
WSS0191.symmetrickey.not.set=WSS0191: SymmetricKey for encryption not set
WSS0191.diag.cause.1=A SymmetricKey was not generated earlier that is set on the calling thread
WSS0191.diag.cause.2=KeyName specified could not locate a key in the security environment
WSS0191.diag.check.1=Check that ExportEncryptedKeyFilter is called before
WSS0191.diag.check.2=Check that a valid KeyStore URL is used to instantiate the SecurityEnvironment and it contains a matching SecretKey
WSS0192.encryption.targets.not.specified=WSS0192: Targets for encryption not specified
WSS0192.diag.cause.1=At least one target needs to be specified for encryption
WSS0192.diag.check.1=Check that a non-null target list is used to instantiate the filter
WSS0193.invalid.target=WSS0193: Target does not correspond to a valid message part
WSS0193.diag.cause.1=Target specified does not correspond to a valid message part
WSS0193.diag.check.1=Check that a valid XPath/QName/wsuId are specified
WSS0194.illegal.target=WSS0194: Cannot encrypt: {0}
WSS0194.diag.cause.1=SOAP-ENV:Header cannot fully be encrypted
WSS0194.diag.cause.2=SOAP-ENV:Body cannot fully be encrypted
WSS0194.diag.check.1=Check that a valid XPath/QName/wsuId are specified complying to the spec.
WSS0195.referencelist.not.set=WSS0195: ReferenceListBlock not set on the calling thread
WSS0195.diag.cause.1=ReferenceListBlock not set on the calling thread
# Usage not found. TODO Remove
#WSS0195.diag.check.1=Check that ExportEncryptedKeyFilter is called before
# Usage not found. TODO Remove
#WSS0195.diag.check.2=Check that ExportReferenceListFilter is called before
WSS0196.securityenvironment.not.set=WSS0196: SecurityEnvironment not set on SecurableSoapMessage
WSS0196.diag.cause.1=An instance of SecurityEnvironment class for the operating environment was not set on SecurableSoapMessage
WSS0196.diag.check.1=Check that SetSecurityEnvironmentFilter processed the message before
WSS0197.keyinfostrategy.null=WSS0197: KeyInfoStrategy must be non-null
WSS0197.diag.cause.1=Cannot instantiate filter with null KeyInfoStrategy
WSS0198.unsupported.signature.algorithm=WSS0198: Unsupported Signature Algorithm: {0}
WSS0198.diag.cause.1=Only RSA_SHA1 Signature algorithm is supported
WSS0198.diag.check.1=Check that RSA_SHA1 signature algorithm is specified
WSS0199.null.creation.time=WSS0199: Timestamp creation time cannot be null
WSS0199.diag.cause.1=Timestamp creation time cannot be null
WSS0199.diag.check.1=Check that non-null creation time is used to instantiate the filter
WSS0200.ineffective.callback.handler=WSS0200: Ineffective XWSSCallbackHandler
WSS0200.diag.cause.1=CallbackHandler to obtain Username/Password at runtime was ineffective
# {0} - most likely an exception message
WSS0201.ineffective.callback.handler=WSS0201: Ineffective XWSSCallbackHandler due to: {0}
WSS0201.diag.cause.1=CallbackHandler to obtain Username at runtime was ineffective
WSS0202.missing.security.header=WSS0202: No wsse:Security element in the message
WSS0202.diag.cause.1=No wsse:Security in the message
WSS0203.policy.violation.exception=WSS0203: Unexpected {0} element in the header
WSS0203.diag.cause.1=Header block corresponding to the desired requirement not found
WSS0203.diag.check.1=Check that the message meets the security requirements
WSS0204.illegal.header.block=WSS0204: Unexpected {0} element in the header
WSS0204.diag.cause.1=Illegal security header block found in the security header
WSS0204.diag.check.1=Check that the message is SOAP Security specification compliant
WSS0205.policy.violation.exception=WSS0205: Requirement for wsu:Timestamp not met
WSS0205.diag.cause.1=Requirement for wsu:Timestamp has not been met
WSS0205.diag.check.1=Check that the message meets the security requirements
WSS0206.policy.violation.exception=WSS0206: Security in the incoming message does not conform to the SecurityPolicy configured at the Recipient.
WSS0206.diag.cause.1=The incoming message does not contain the required security.
WSS0206.diag.check.1=Check that the security in the incoming message matches the security policy configured at the Recipient
WSS0207.unsupported.operation.exception=WSS0207: Operation not supported on calling object
WSS0207.diag.cause.1=Operation not supported on calling object
WSS0208.policy.violation.exception=WSS0208: Extra security than required found
WSS0208.diag.cause.1=Extra security than required by the receiver side policy found in the message
WSS0208.diag.check.1=Check that the message strictly meets the security requirements
WSS0209.unexpected.header.block=WSS0209: Expected {0}, found {1} in security header
WSS0209.diag.cause.1=The message filter is in-correctly configured to process an inbound msg
WSS0209.diag.check.1=Check that the filters are correctly configured to process inbound msgs
WSS0210.unsupported.key.encryption.algorithm=WSS0210: Unsupported Key Encryption Algorithm: {0}
WSS0210.diag.cause.1=Only RSAv1.5 Key Encryption Algorithm is supported
WSS0210.diag.check.1=Check that the Key Encryption Algorithm used in the inbound msg is RSAv1.5
WSS0211.error.decrypting.key=WSS0211: Error decrypting encryption key
WSS0211.diag.cause.1=Only TripleDES Keys are supported
WSS0212.policy.violation.exception=WSS0212: Receiver requirement for digested password not met
WSS0212.diag.cause.1=Receiver requirement for digested password in UsernameToken not met
WSS0212.diag.check.1=Check that the message meets the security requirements
WSS0213.policy.violation.exception=WSS0213: Receiver requirement for use nonce not met
WSS0213.diag.cause.1=Receiver requirement for nonce in UsernameToken not met
WSS0213.diag.check.1=Check that the message meets the security requirements
WSS0214.failed.sender.authentication=WSS0214: UsernameToken Authentication Failed
WSS0214.diag.cause.1=Invalid Username/Password pair in token
WSS0215.failed.propertycallback=WSS0215: Handler failed to handle PropertyCallback, got Exception
WSS0215.diag.cause.1=handle() call for a PropertyCallback on the handler threw exception
WSS0215.diag.check.1=Check the handler implementation
WSS0216.callbackhandler.handle.exception=WSS0216: An Error occurred using CallbackHandler for : {0}
WSS0216.diag.cause.1=handle() call on the handler threw exception
WSS0216.diag.check.1=Check the handler implementation
WSS0217.callbackhandler.handle.exception.log=WSS0217: An Error occurred using CallbackHandler handle() Method.
WSS0217.diag.cause.1=handle() call on the handler threw exception
WSS0217.diag.check.1=Check the handler implementation
WSS0218.cannot.locate.default.cert=WSS0218: Unable to locate a default certificate using CallbackHandler. If you are using WSIT, make sure appropriate KeyStore/TrustStore assertions are present in wsit-client.xml/wsit-*.xml.
WSS0218.diag.cause.1=handle() call on the handler failed to set the Callback
WSS0218.diag.check.1=Check the handler implementation for SignatureKeyCallback.DefaultPrivKeyCertRequest
WSS0219.cannot.locate.default.privkey=WSS0219: Unable to locate a default private key using CallbackHandler
WSS0219.diag.cause.1=handle() call on the handler failed to set the Callback
WSS0219.diag.check.1=Check the handler implementation for SignatureKeyCallback.DefaultPrivKeyCertRequest
WSS0220.cannot.locate.symmetrickey.for.decrypt=WSS0220: Unable to locate symmetric key for decryption using CallbackHandler
WSS0220.diag.cause.1=handle() call on the handler failed to set the Callback
WSS0220.diag.check.1=Check the handler implementation for DecryptionKeyCallback.AliasSymmetricKeyRequest
# {0} - "Signature"/"Key Encryption"/client name/alias name e.g.: Unable to locate matching certificate for xws-security-server using CallbackHandler.
WSS0221.cannot.locate.cert=WSS0221: Unable to locate matching certificate for {0} using CallbackHandler.
WSS0221.diag.cause.1=handle() call on the handler failed to set the Callback
WSS0221.diag.check.1=Check the handler implementation for SignatureKeyCallback and/or EncryptionKeyCallback, check keystores and truststores
# {0} - "Signature"/"Key Encryption"/client name/alias name e.g.: Unable to locate matching certificate for xws-security-server using CallbackHandler.
WSS0222.cannot.locate.privkey=WSS0222: Unable to locate matching private key for {0} using CallbackHandler.
WSS0222.diag.cause.1=handle() call on the handler failed to set the Callback
WSS0222.diag.check.1=Check keystore path and ensure that the right keys are present
WSS0223.failed.certificate.validation=WSS0223: Certificate validation failed
WSS0224.unsupported.AssociatedSubject=WSS0224: This environment does not have an associated Subject
WSS0225.failed.PasswordValidationCallback=WSS0225: Exception occured in Password Validation Callback
WSS0226.failed.Validating.DefaultCreationTime=WSS0226: An Error occurred while parsing default creation time into Date format.
WSS0227.invalid.older.CreationTime=WSS0227: The creation time is older than (currenttime-timestamp-freshness-limit-max-clock-skew)
WSS0228.invalid.ahead.CreationTime=WSS0227: The creation time is ahead of current time
WSS0229.failed.Validating.TimeStamp=WSS0229: Exception occured in validating Timestamp
WSS0230.unsupported.Validating.SAMLIssuer=WSS0230: SAML Issuer Validation not yet supported.
WSS0231.unsupported.Validating.SAMLUser=WSS0231: SAML User Validation not yet supported.
WSS0232.expired.Message=WSS0232: Message Expired
WSS0233.invalid.expire.before.creation=WSS0233: Expiration time is before Creation Time
WSS0234.failed.Validate.SAMLAssertion=WSS0234: An Error occurred while Validating SAML Assertion in Policy.
WSS0235.failed.locate.SAMLAssertion=WSS0235: failed to locate SAML Assertion
WSS0236.null.SAMLAssertion=WSS0236: SAML Assertion is not set into Policy by CallbackHandler.
WSS0237.failed.DynamicPolicyCallback=WSS0237: An Error occurred while populating SAML Policy in Dynamic Policy Callback
WSS0238.failed.Resolve.SAMLAssertion=WSS0238: Failed to resolve SAML Assertion
WSS0239.failed.process.SecurityTokenReference=WSS0239: Failed to process Security Token Reference
WSS0240.invalid.EncryptedKeySHA1.reference=WSS0240: EncryptedKeySHA1 reference not correct
WSS0241.unableto.set.EKSHA1.OnContext=WSS0241: Failed to set EKSHA1 value on Context properties
# SCT = Security Context Token.
WSS0242.unableto.locate.SCT=WSS0242: Failed to locate SCT with given ID
WSS0243.invalid.valueType.NonSCTToken=WSS0243: Incorrect ValueType specified for a Non SCT Token
WSS0244.invalid.level.DKT=WSS0244: A derived Key Token should be a top level key binding
WSS0245.failed.resolve.SecurityToken=WSS0245: Exception occured while trying to resolve security token
WSS0246.unableto.locate.SecureConversationSession=WSS0246: Could not locate SecureConversation session for Id
WSS0247.failed.resolve.DerivedKeyToken=WSS0247: Failed to resolve Derived Key Token
WSS0248.null.STR=WSS0248: Invalid DerivedKey Token encountered, no STR found
WSS0249.unsupported.TokenType.DKT=WSS0249: Unsupported TokenType under DerivedKey Token
WSS0250.failed.process.STR=WSS0250: Failed to process Security token reference
WSS0251.invalid.SecurityPolicyInstance=WSS0251: SecurityPolicy instance should be of type WSSPolicy OR MessagePolicy OR DynamicSecurityPolicy
WSS0252.failedto.getChildElement=WSS0252: Failed to get child element
WSS0253.invalid.Message=WSS0253: Message does not conform to configured policy: No Security Header found in message
WSS0254.failedto.process.primaryORsecondary.policy=WSS0254: Failed to process Primary or Secondary Policy
WSS0255.invalid.configuredPolicy.Timestamp=WSS0255: Timestamp not found in configured policy but occurs in message
WSS0256.failed.configure.ASC=WSS0256: Exception occured while trying to configure Application Security Configuration
WSS0257.failedto.append.SecurityPolicy.MessagePolicy=WSS0257: Failed to append security policy in message policy
WSS0258.invalid.requirements=WSS0258: More Receiver requirements specified than present in the message
WSS0259.invalid.SEC.username=WSS0259: More than one wsse:UsernameToken element present in security header
WSS0260.invalid.DSP=WSS0260: Invalid dynamic security policy returned by callback handler
WSS0261.invalid.Message.policyset=WSS0261: Message does not conform to configured policy: policy set not present in receiver requirements
WSS0262.invalid.Message.policytype=WSS0262: Message does not conform to configured policy: policy type not present in receiver requirements
WSS0263.invalid.Message.policy=WSS0263: Message does not conform to configured policy
WSS0264.failedto.first.primary.policy=WSS0265: Failed to get First Primary Policy
WSS0265.error.primary.policy=WSS0265: Primary Policy Violation occured
WSS0266.failedto.process.secondary.policy=WSS0266: Failed to process Secondary Policy
WSS0267.invalid.configuredPolicy.Username=WSS0267: Policy Verification error: UsernameToken not found in configured policy but occurs in message
WSS0268.error.policy.verification=WSS0268: Policy verification error: Missing Signature Element
WSS0269.error.Encryptionpolicy.verification=WSS0269: Encryption Policy verification error: Missing encryption element
WSS0270.failedto.get.SecurityPolicy.MessagePolicy=WSS0270: Failed to get security policy from message policy
WSS0271.failedto.resolve.policy=WSS0271: Policy has to resolve to MessagePolicy
WSS0272.failedto.derefer.targets=WSS0272: Failed to Dereference targets
WSS0273.failedto.process.policy=WSS0273: Failed to process message policy
WSS0274.invalid.SEC.Timestamp=WSS0274: More than one wsu:Timestamp element present in security header
WSS0275.invalid.policy.NoUsername.SecHeader=WSS0275: Message does not conform to configured policy: UsernameToken element not found in security header
WSS0276.invalid.policy.NoTimestamp.SecHeader=WSS0276: Message does not conform to configured policy: Timestamp element not found in security header
WSS0277.invalid.AddtionalSEC.Message.policy=WSS0277: Message does not conform to configured policy Additional security than required found
WSS0278.failedto.get.localName=WSS0278: Exception occured in getting localName of SOAPElement
WSS0279.failed.check.secSecurity=WSS0279: failed to check For Extra Secondary Security
WSS0280.failed.create.UsernameToken=WSS0280: Exception occured while trying to create username token
WSS0281.unsupported.operation=WSS0281: Unsupported operation getTokenValue() on UsernameToken
WSS0282.unsupported.KeyIdentifier.Reference.DKT=WSS0282: Unsupported KeyIdentifierReference under DerivedKey
WSS0283.unsupported.ReferenceType.DKT=WSS0283: Unsupported ReferenceType under DerivedKey
WSS0284.WSS.SOAP.Fault.Exception=WSS0284: SOAP Fault Exception Occured
WSS0285.error.NoElement=WSS0285: No elements exist with Id/WsuId
WSS0286.invalid.NoofElements=WSS0286: More than one element exists with Id/WsuId
WSS0287.error.extracting.attachmentpart=WSS0287: Exception occured while trying to extract attachment part
WSS0288.failed.getMessageParts.Qname=WSS0288: failed to get Message Parts of using QName targettype
WSS0289.failed.getMessageParts.XPath=WSS0289: failed to get Message Parts of using XPath targettype
WSS0290.failed.getMessageParts.URI=WSS0290: failed to get Message Parts of using URI targettype
WSS0291.unsupported.operation.getAttachment=WSS0291: Unsupported Operation get Attachment
WSS0292.unsupported.operation.removeAttachment=WSS0292: Unsupported Operation remove Attachment
WSS0293.failed.RSAKeyValue=WSS0293: Exception occured while trying to get RSA Key Value
WSS0294.failed.X509Data=WSS0294: Exception occured while trying to add X509 Certificate into X509 Data
WSS0295.password.val.not.config.username.val=WSS0295: Error: No PasswordValidator Configured for UsernameToken Validation.
WSS0296.null.chain.cert=WSS0296: Error: Empty certificate chain returned by PrivateKeyCallback.
WSS0298.X509.expired=WSS0298: X509Certificate Expired.
WSS0299.X509.notValid=WSS0299: X509Certificate's Validity Failed.
#WSS Messages from 300 to 399
WSS0300.no.jce.provider=WSS0300: Unable to locate a JCE provider for {0}
WSS0301.unableto.decode.data=WSS0301: Unable to decode data from token
WSS0301.diag.cause.1=Data malformed. Base 64 decoding error
WSS0301.diag.check.1=Check data is base64 encoded
WSS0302.unableto.create.x509cert=WSS0302: Unable to create X509Certificate from data in token
WSS0302.diag.cause.1=Certificate parsing problem
WSS0302.diag.check.1=Data stream used to create the x509 certificate maybe corrupted
WSS0303.unableto.get.encoded.x509cert=WSS0303: Unable to get encoded representation of X509Certificate
WSS0303.diag.cause.1=Certificate encoding exception
WSS0303.diag.check.1=Check that the x509 data is valid. Could not extract raw bytes from it.
WSS0304.message.doesnot.contain.header=WSS0304: Message does not contain a Header
WSS0305.message.doesnot.contain.secheaderblock=WSS0305: Message does not contain wsse:Security header block
WSS0306.invalid.passwd.type=WSS0306: Invalid password type. Must be one of {0} or {1}
WSS0306.diag.cause.1=Invalid password type
WSS0306.diag.check.1=Password type must match that specified by the WSS specification
WSS0307.nonce.enctype.invalid=WSS0307: Nonce encoding type invalid
WSS0307.diag.cause.1=Nonce encoding namespace check failed
WSS0307.diag.check.1=Nonce encoding type namespace seems invalid
WSS0308.couldnot.decode.hex.nonce=WSS0308: Exception [ {0} ] while decoding hex nonce
WSS0309.couldnot.decode.base64.nonce=WSS0309: Exception [ {0} ] while decoding base64 nonce
WSS0310.no.such.algorithm=WSS0310: {0}, No such algorithm found
WSS0310.diag.cause.1=NoSuchAlgorithmException: Invalid algorithm
WSS0310.diag.check.1=Check that the algorithm passed to SecureRandom is valid
WSS0311.passwd.digest.couldnot.be.created=WSS0311: Exception [ {0} ] while creating Password Digest.
WSS0311.diag.cause.1=Password digest could not be created
WSS0311.diag.check.1=Check that the algorithm passed to MessageDigest is valid
WSS0312.exception.in.certpath.validate=WSS0312: Exception [ {0} ] while validating certPath
WSS0313.cert.is.null=WSS0313: Certificate is null
WSS0314.cert.not.trusted.remote.cert=WSS0314: Certificate is not a trusted remote certificate
WSS0315.not.a.cert.entry=WSS0315: KeyStore entry with alias={0} is not a certificate entry
WSS0316.enctype.invalid=WSS0316: Encoding type invalid
WSS0316.diag.cause.1=BinarySecurity Token's Encoding type is invalid
WSS0316.diag.check.1=Check that encoding value for BinarySecurityToken is valid as per spec.
# {0} - most likely an exception message
WSS0317.cannot.find.x509cert.because=WSS0317: Cannot find X509Certificate because of {0}
WSS0317.diag.cause.1=Could not find X.509 certificate
WSS0317.diag.check.1=Ensure certificate path is not empty and certificate type is correct
WSS0318.exception.while.creating.keyinfoblock=WSS0318: Exception while constructing KeyInfo Header block
WSS0318.diag.cause.1=Error while parsing and creating the KeyInfo instance
WSS0318.diag.check.1=Check values passed to KeyInfo constructor
WSS0319.exception.adding.keyname=WSS0319: Exception while adding keyname to KeyInfo Header block
WSS0319.diag.cause.1=Could not add keyname to KeyInfo Header block
WSS0319.diag.check.1=Check KeyInfo and KeyName have been instantiated without exceptions
WSS0320.exception.getting.keyname=WSS0320: Exception while getting keyname from KeyInfo Header block
WSS0320.diag.cause.1=Could not get KeyName from KeyInfo
WSS0320.diag.check.1=Make sure the KeyName exists in the KeyInfo
WSS0321.exception.converting.keyinfo.tosoapelem=WSS0321: Exception converting KeyInfo Header block to SOAPElement
WSS0321.diag.cause.1=Could not retrieve element from KeyInfo or could not import the node
WSS0321.diag.check.1=Check the element to be converted to SOAPElement
WSS0322.exception.creating.signatureblock=WSS0322: Exception while creating Signature Header block
WSS0322.diag.cause.1=Exception while parsing and creating the Signature element
WSS0322.diag.check.1=Check that a fully initialized XML Signature was passed
WSS0323.exception.while.signing=WSS0323: Exception while signing
WSS0323.diag.cause.1=Exception while trying to sign
WSS0323.diag.check.1=Check the key used to sign
WSS0324.exception.in.getting.signaturevalue=WSS0324: Exception in getting SignatureValue
WSS0324.diag.cause.1=Could not retrieve Signature value bytes
WSS0324.diag.check.1=Check getSignatureValue failure cause from underlying XML DSIG implementation
WSS0325.exception.adding.reference.to.signedinfo=WSS0325: Exception while adding a Reference to SignedInfo
WSS0325.diag.cause.1=Exception while adding a Reference with URI, transforms and Digest algorithm URI to SignedInfo
WSS0325.diag.check.1=Check values passed to constructor of XMLSignature.addDocument passed to XML DSig implementation are correct
WSS0326.exception.verifying.signature=WSS0326: Exception while verifying signature
WSS0326.diag.cause.1=Could not validate signature based on the public key of the certificate passed
WSS0326.diag.check.1=Check that the message signed using corresponding private key, and has not been tampered with
WSS0327.exception.converting.signature.tosoapelement=WSS0327: Exception while converting signature block to SOAPElement
WSS0327.diag.cause.1=Could not retrieve element from Signature or could not import the node
WSS0327.diag.check.1=Check the element to be converted to SOAPElement
WSS0328.error.parsing.creationtime=WSS0328: Error while parsing creation time
WSS0328.diag.cause.1=Error parsing date.
WSS0328.diag.check.1=Check date format is in UTC. Check it is "yyyy-MM-dd'T'HH:mm:ss'Z'" or "yyyy-MM-dd'T'HH:mm:ss'.'sss'Z'"
WSS0329.usernametoken.expected=WSS0329: Expected UsernameToken Element, but found [ {0} ]
WSS0329.diag.cause.1=Expecting UsernameToken Element
WSS0329.diag.check.1=Check that the next element is UsernameToken
WSS0330.usernametoken.firstchild.mustbe.username=WSS0330: The first child of a UsernameToken Element, should be a Username
WSS0330.diag.cause.1=Username not first child of UsernameToken
WSS0330.diag.check.1=Make sure first child of wsse:UsernameToken is Username in wsse namespace
WSS0331.invalid.usernametoken=WSS0331: Element passed was not a SOAPElement or is not a proper UsernameToken
WSS0331.diag.cause.1=Element may not be a proper UsernameToken
WSS0331.diag.check.1=Check that the UsernameToken matches the token schema
WSS0332.usernametoken.null.username=WSS0332: Username token does not contain the username
WSS0332.diag.cause.1=Username was null
WSS0332.diag.check.1=Check UsernameToken contains a valid Username
WSS0333.javax.net.ssl.keyStore.notset=WSS0333: property javax.net.ssl.keyStore, required for initializing the Security Environment not set
WSS0333.diag.cause.1=Keystore URL is null
WSS0333.diag.check.1=Check that the property javax.net.ssl.keyStore is set properly
WSS0334.unsupported.keyidentifier=WSS0334:unsupported KeyIdentifier Reference Type encountered
WSS0334.diag.cause.1=KeyIdentifier holds invalid ValueType
WSS0334.diag.check.1=Check KeyIdentifier ValueType's value
WSS0335.unsupported.referencetype=WSS0335:unsupported Reference Type encountered
WSS0335.diag.cause.1=KeyReference Type not supported
WSS0335.diag.check.1=KeyReference type should be one of KeyIdentifier, Reference, X509Data
WSS0336.cannot.locate.publickey.for.signature.verification=WSS0336:Couldn't locate the public key for signature verification
WSS0336.diag.cause.1=Can't locate public key
WSS0336.diag.check.1=Check public key retrieved should not be null
WSS0337.unsupported.directref.mechanism=WSS0337: Unsupported DirectReference mechanism {0}
WSS0337.diag.cause.1=Could not resolve URI
WSS0337.diag.check.1=Check DirectReference's ValueType, it is not supported
WSS0338.unsupported.reference.mechanism=WSS0338: Unsupported Reference mechanism
WSS0338.diag.cause.1=Key Reference Mechanism not supported
WSS0338.diag.check.1=Check reference is one of X509IssuerSerial, DirectReference, KeyIdentifier
WSS0339.unsupported.keyinfo=WSS0339: Unsupported keyinfo block encountered
WSS0339.diag.cause.1=Support for processing information in the given ds:KeyInfo is not present
WSS0339.diag.check.1=Check ds:KeyInfo matches schema
WSS0340.created.ahead.of.current=WSS0340: The creation time is ahead of the current time.
WSS0340.diag.cause.1= Creation time cannot be ahead of current UTC time
WSS0340.diag.check.1=Check system time and ensure it is correct
WSS0341.created.older.than.timestamp.freshness=WSS0341: The creation time is older than currenttime - timestamp-freshness-limit - max-clock-skew
WSS0341.diag.cause.1= Creation time is very old
WSS0341.diag.check.1=Check system time and ensure it is correct
WSS0342.valtype.invalid=WSS0342: ValueType type invalid
WSS0342.diag.cause.1=BinarySecurity Token's Value type is invalid
WSS0342.diag.check.1=Check that valueType for BinarySecurity token is valid as per spec.
WSS0343.error.creating.bst=WSS0343: Error creating BinarySecurityToken
# BST = Binary Security Token. {0} - most likely an exception message
WSS0343.diag.cause.1=Error in creating the BST due to {0}
WSS0343.diag.check.1=Check that all required values are set on the Binary Security Token, including TextNode value.
# wss messages
WSS0344.error.decoding.bst=WSS0344: BinarySecurityToken is not Base64 Encoded
WSS0344.diag.cause.1=The binary data in the Security Token cannot be decoded, expected Base64 encoding
WSS0344.diag.check.1=Check to see that the encoding format of the Binary Security Token is Base64Binary
WSS0345.error.creating.edhb=WSS0345: Error creating EncryptedData Header Block due to {0}
WSS0345.diag.cause.1=Error creating SOAPElement for EncryptedDataHeaderBlock
WSS0345.diag.check.1=If SOAPElement is used to create EncryptedData HeaderBlock, check to see that it is valid as per spec.
# {0} - element name
WSS0346.error.creating.edhb=WSS0346: Expected xenc:EncryptedData SOAPElement, found {0}
WSS0346.diag.cause.1=Invalid SOAPElement passed to EncryptedDataHeaderBlock constructor
WSS0346.diag.check.1=Check that the SOAPElement passed to EncryptedDataHeaderBlock is valid as per spec.
WSS0347.missing.cipher.data=WSS0347: CipherData in EncryptedType is not present
WSS0347.diag.cause.1=SOAPElement used to initialize EncryptedType may not have CipherData element
WSS0347.diag.cause.2=CipherData may not have been set on the EncryptedType
WSS0347.diag.check.1=Check to see SOAPElement used to initialize EncryptedType has CipherData
WSS0347.diag.check.2=Check to see setCipherData() is called on the EncryptedType
# {0} - exception message
WSS0348.error.creating.ekhb=WSS0348: Error creating EncryptedKeyHeaderBlock due to {0}
WSS0348.diag.cause.1=Error creating SOAPElement for EncryptedKeyHeaderBlock
WSS0348.diag.check.1=If SOAPElement is used to create EncryptedKeyHeaderBlock, check to see that it is valid as per spec.
# {0} - element name
WSS0349.error.creating.ekhb=WSS0349: Expected xenc:EncryptedKey SOAPElement, found {0}
WSS0349.diag.cause.1=Invalid SOAPElement passed to EncryptedKeyHeaderBlock()
WSS0349.diag.check.1=Check that the SOAPElement passed to EncryptedKeyHeaderBlock() is valid as per spec.
# {0} - exception message
WSS0350.error.setting.ciphervalue=WSS0350: Error setting CipherValue in EncryptedKey due to {0}
WSS0350.diag.cause.1=Error creating/updating CipherData SOAPElement (in EncryptedKeyHeaderBlock)
WSS0350.diag.check.1=Refer your SAAJ API Documentation
# {0} - exception message
WSS0351.error.setting.encryption.method=WSS0351: Error setting Encryption method on EncryptedType due to {0}
WSS0351.diag.cause.1=Error creating EncryptionMethod SOAPElement
WSS0351.diag.check.1=Refer your SAAJ API Documentation
# {0} - exception message
WSS0352.error.getting.cipherValues=WSS0352: Error getting CipherValues on CipherData due to {0}
WSS0352.diag.cause.1=Error creating javax.xml.soap.Name for CipherValue
WSS0352.diag.check.1=Refer your SAAJ API Documentation
WSS0353.missing.cipherValue=WSS0353: CipherValue is not present in CipherData
WSS0353.diag.cause.1=No CipherValue element(s) are present in CipherData
WSS0353.diag.check.1=Check to see if setCipherValue() is called on EncryptedType
WSS0354.error.initializing.encryptedType=WSS0354: Error initializing EncryptedType due to {0}
WSS0354.diag.cause.1=An error may have occured creating javax.xml.soap.Name for EncryptionMethod
WSS0354.diag.cause.2=An error may have occured creating javax.xml.soap.Name for KeyInfo
WSS0354.diag.cause.3=An error may have occured creating javax.xml.soap.Name for CipherData
WSS0354.diag.cause.4=An error may have occured creating javax.xml.soap.Name for EncryptionProperties
WSS0354.diag.check.1=Refer your SAAJ API Documentation
# {0} - "DSA"/"RSA"/"" (no typo here, do not add space after this placeholder), {1} - exception message
WSS0355.error.creating.keyvalue=WSS0355: Error creating {0}KeyValue due to {1}
WSS0355.diag.cause.1=Error creating org.apache.xml.security.keys.content.keyvalues.DSAKeyValue
WSS0355.diag.cause.2=Error creating org.apache.xml.security.keys.content.keyvalues.RSAKeyValue
WSS0355.diag.cause.3=Error creating org.apache.xml.security.keys.content.KeyValue
WSS0355.diag.check.1=Check that a non-null SOAPElement is passed to addXXXKeyValue()
WSS0356.error.creating.x509data=WSS0356: Error creating X509Data due to {0}
WSS0356.diag.cause.1=Error creating org.apache.xml.security.keys.content.X509Data
WSS0356.diag.check.1=Check that a non-null SOAPElement is passed to addX509Data()
WSS0357.error.getting.keyvalue=WSS0357: Cannot get KeyValue for index [{0}] due to {1}
WSS0357.diag.cause.1=Error getting KeyValue from KeyInfo for the given index
WSS0357.diag.check.1=Check that the ds:KeyInfo element has ds:KeyValue elements
WSS0357.diag.check.2=Check that the index (beginning with 0) used to refer the ds:KeyValue element is valid
WSS0358.error.getting.x509data=WSS0358: Cannot get X509Data for index [{0}] due to {1}
WSS0358.diag.cause.1=Error getting X509Data from KeyInfo for the given index
WSS0358.diag.check.1=Check that the ds:KeyInfo element has ds:X509Data elements
WSS0358.diag.check.2=Check that the index (beginning with 0) used to refer the ds:X509Data element is valid
WSS0359.error.adding.x509data=WSS0359: Error adding X509Data due to {0}
WSS0359.diag.cause.1=Error adding org.apache.xml.security.keys.content.X509Data to KeyInfo
WSS0359.diag.check.1=Check that a valid org.apache.xml.security.keys.content.X509Data (as per specs.) is passed to addX509Data()
WSS0360.error.creating.rlhb=WSS0360: Cannot create ReferenceListHeaderBlock due to {0}
WSS0360.diag.cause.1=An error may have occured creating javax.xml.soap.Name for ReferenceList
WSS0360.diag.check.1=Refer your SAAJ API Documentation
WSS0361.error.creating.rlhb=WSS0361: Error creating ReferenceListHeaderBlock due to {0}
WSS0361.diag.cause.1=An error may have occured creating org.w3c.dom.Element for ReferenceList
WSS0361.diag.cause.2=The org.w3c.dom.Document object passed ReferenceListHeaderBlock() may be null
WSS0361.diag.check.1=Check that the Namespace specified does not contain any illegal characters as per XML 1.0 specification
WSS0361.diag.check.2=Check that the QName specified is not malformed (Ref J2SE Documentation for more)
WSS0361.diag.check.3=Check that a non-Null Document is passed to the ReferenceListHeaderBlock()
WSS0362.error.creating.rlhb=WSS0362: Expected xenc:ReferenceList SOAPElement, found {0}
WSS0362.diag.cause.1=Invalid SOAPElement passed to ReferenceListHeaderBlock()
WSS0362.diag.check.1=Check that the SOAPElement passed to ReferenceListHeaderBlock() is valid as per spec.
WSS0363.error.adding.datareference=WSS0363: Cannot add xenc:DataReference element to xenc:ReferenceList due to {0}
WSS0363.diag.cause.1=Error creating javax.xml.soap.SOAPElement for xenc:DataReference
WSS0363.diag.cause.2=Error adding xenc:DataReference (SOAPElement) as child element of xenc:DataReference (SOAPElement)
WSS0363.diag.cause.3=Error setting URI attribute on javax.xml.soap.SOAPElement for xenc:DataReference
WSS0363.diag.check.1=Refer your SAAJ API Documentation
WSS0364.error.apache.xpathAPI=WSS0364: Cannot find xenc:EncryptedData elements due to {0}
WSS0364.diag.cause.1=An Internal XPathAPI transformation error occurred
WSS0365.error.creating.namespaceNode=WSS0365: Error creating namespace node due to {0}
WSS0365.diag.cause.1=Error creating javax.xml.soap.SOAPElement for namespace node
WSS0365.diag.check.1=Refer your SAAJ API Documentation
WSS0366.multiple.encrypteddata.found=WSS0366: More than one xenc:EncryptedData found
WSS0366.diag.cause.1=More than one xenc:EncryptedData has the same Id attribute value
WSS0367.no.encrypteddata.found=WSS0367: No xenc:EncryptedData found
WSS0367.diag.cause.1=A valid xenc:EncryptedData element has not been referenced from the xenc:ReferenceList
# {0} - most likely an exception message
WSS0368.soap.exception=WSS0368: Error getting SOAPEnvelope from SOAPPart due to {0}
WSS0368.diag.cause.1=Error getting SOAPEnvelope from SOAPPart
WSS0368.diag.check.1=Refer your SAAJ API Documentation
WSS0369.soap.exception=WSS0369: Error getting SOAPHeader from SOAPEnvelope due to {0}
WSS0369.diag.cause.1=Error getting SOAPHeader from SOAPEnvelope
WSS0369.diag.cause.2=Error creating SOAPHeader
WSS0369.diag.check.1=Refer your SAAJ API Documentation
WSS0370.error.deleting.secheader=WSS0370: Error deleting SecurityHeader due to exception.
WSS0370.error.processing.secheader=WSS0370: Error processing SecurityHeader
WSS0371.error.generate.fault=WSS0371: Error occurred in generating fault message due to {0}
WSS0371.diag.cause.1=Error in getting the SOAPBody from the SOAPMessage
WSS0371.diag.cause.2=Error in creating javax.xml.soap.Name for setting the fault on SOAPBody
WSS0371.diag.cause.3=Error in adding fault to SOAPBody
WSS0371.diag.check.1=Refer your SAAJ API Documentation
WSS0372.error.apache.xpathAPI=WSS0372: Cannot find elements with Id attribute due to {0}
WSS0372.diag.cause.1=An Internal XPathAPI transformation error occurred
WSS0373.error.apache.xpathAPI=WSS0373: Cannot find elements with wsu:Id attribute due to {0}
WSS0373.diag.cause.1=An Internal XPathAPI transformation error occurred
WSS0374.error.apache.xpathAPI=WSS0374: Cannot find element with wsu:Id attribute value {0} due to {1}
WSS0374.diag.cause.1=An Internal XPathAPI transformation error occurred
WSS0375.error.apache.xpathAPI=WSS0375: Cannot find element with Id attribute value {0} due to {1}
WSS0375.diag.cause.1=An Internal XPathAPI transformation error occurred
WSS0376.error.inserting.header=WSS0376: Cannot insert header block due to {0}
WSS0376.diag.cause.1=Error importing the SOAPElement representing the header block to the document corresponding to the SOAPMessage to which the header is being added
WSS0376.diag.check.1=Check that the SecurityHeaderBlock can be transformed to a valid SOAPElement
WSS0376.diag.check.2=Refer J2SE Documentation for more
WSS0377.error.creating.str=WSS0377: Cannot create SecurityTokenReference due to {0}
WSS0377.diag.cause.1=Error creating javax.xml.soap.SOAPElement for SecurityTokenReference
WSS0377.diag.check.1=Refer your SAAJ API Documentation
WSS0378.error.creating.str=WSS0378: Cannot create SecurityTokenReference due to {0}
WSS0378.diag.cause.1=Error creating javax.xml.soap.SOAPElement for SecurityTokenReference
WSS0378.diag.check.1=Check that the org.w3c.dom.Document object passed to SecurityTokenReference() is non-null
WSS0378.diag.check.2=Refer your SAAJ API Documentation
WSS0379.error.creating.str=WSS0379: Expected wsse:SecurityTokenReference SOAPElement, found {0}
WSS0379.diag.cause.1=SOAPElement passed to SecurityTokenReference() is not a valid SecurityTokenReference element as per spec.
WSS0379.diag.check.1=Check that a valid SOAPElement as per spec. is passed to SecurityTokenReference()
WSS0380.error.setting.reference=WSS0380: Cannot set ds:Reference on SecurityTokenReference
WSS0380.diag.cause.1=The ds:Reference would already have been set using the constructors
WSS0380.diag.check.1=Check that a SOAPElement with ds:Reference (child element) is not used to instantiate SecurityTokenReference
WSS0381.error.setting.reference=WSS0381: Cannot set ds:Reference on SecurityTokenReference
WSS0381.diag.cause.1=Error in setting the passed ReferenceElement on SecurityTokenReference
WSS0381.diag.check.1=Refer your SAAJ API Documentation
WSS0382.error.appending.object=WSS0382: Cannot append ds:Object due to {0}
WSS0382.diag.cause.1=Error appending ds:Object element to ds:Signature
WSS0382.diag.check.1=Check that a valid ds:Object SOAPElement (as per spec.) is passed to appendObject()
WSS0382.diag.check.2=Check that a non-null SOAPElement is passed to appendObject()
WSS0383.document.not.set=WSS0383: Owner document of ds:Signature SOAPElement is not set
WSS0383.diag.cause.1=Owner document of ds:Signature SOAPElement is null
WSS0383.diag.check.1=Check that the Document used to instantiate SignatureHeaderBlock() is not null
WSS0384.error.creating.timestamp=WSS0384: Cannot create Timestamp due to {0}
WSS0384.diag.cause.1=Error creating javax.xml.soap.Name for Timestamp
WSS0384.diag.check.1=Refer your SAAJ API Documentation
WSS0385.error.creating.timestamp=WSS0385: Expected wsu:Timestamp SOAPElement, found {0}
WSS0385.diag.cause.1=The SOAPElement used to instantiate Timestamp() is not valid (as per spec.)
WSS0385.diag.check.1=Check that the Localname and NamespaceURI of the SOAPElement used to create Timestamp() are correct as per spec.
WSS0386.error.creating.timestamp=WSS0386: Cannot create SOAPElement representation of Timestamp due to {0}
WSS0386.diag.cause.1=Error creating javax.xml.soap.SOAPElement for Timestamp
WSS0386.diag.cause.2=Error adding child SOAPElements to the Timestamp element
WSS0386.diag.check.1=Refer your SAAJ API Documentation
WSS0387.error.creating.usernametoken=WSS0387: Username is not set
WSS0387.diag.cause.1=Username is not set
WSS0387.diag.check.1=Check that a Username has been passed through the configuration file or through the callback handler
WSS0388.error.creating.usernametoken=WSS0388: Error creating SOAPElement representation of UsernameToken due to {0}
WSS0388.diag.cause.1=Error creating javax.xml.soap.SOAPElement for UsernameToken
WSS0388.diag.cause.2=Error adding child SOAPElements to the UsernameToken element
WSS0388.diag.check.1=Refer your SAAJ API Documentation
WSS0389.unrecognized.nonce.encoding=WSS0389: Expected Base64 EncodingType, found {0}
WSS0389.diag.cause.1=Base64 nonce encoding type has not been specified
WSS0389.diag.check.1=Check that the nonce encoding type used to create UsernameToken is Base64
WSS0390.unsupported.charset.exception=WSS0390: Charset UTF-8 is Unsupported
WSS0390.diag.cause.1=UTF-8 Charset is unsupported for byte-encoding (a string)
WSS0390.diag.check.1=Refer your J2SE Documentation
WSS0391.error.creating.X509SecurityToken=WSS0391: Expected wsse:BinarySecurityToken, found {0}
WSS0391.diag.cause.1=Invalid Localname and NamespaceURI of the SOAPElement used for creating the token
WSS0391.diag.check.1=Check that the Localname and NamespaceURI of the SOAPElement used to create X509SecurityToken are valid (as per spec.)
WSS0392.invalid.X509cert.version=WSS0392: Version [3] X509Certificate is expected, version found: [{0}]
WSS0392.diag.cause.1=A version [3] X509Certificate is expected
WSS0393.current.ahead.of.expires=WSS0393: The current time is ahead of the expiration time in Timestamp
WSS0393.diag.cause.1= The expiration time in Timestamp cannot be before current UTC time
WSS0393.diag.check.1=Check system time and ensure it is correct
WSS0394.error.parsing.expirationtime=WSS0394: An Error occurred while parsing expiration/creation time into Date format.
WSS0394.diag.cause.1=Error parsing date.
# Format should not be changed. Letters can be translated but the user should known that java.text.SimpleDateFormat is responsible for formatting (meaning of symbols can be found at http://docs.oracle.com/javase/tutorial/i18n/format/simpleDateFormat.html).
WSS0394.diag.check.1=Check date format is in UTC. Check it is "yyyy-MM-dd'T'HH:mm:ss'Z'" or "yyyy-MM-dd'T'HH:mm:ss'.'sss'Z'"
WSS0395.creating.cipherData=WSS0395: Error creating CipherData
WSS0395.diag.cause.1=Error while creating a CipherData element
WSS0395.diag.check.1=Refer SAAJ APIs
WSS0396.notchild.securityHeader=WSS0396: Element {0} not child SecurityHeader
WSS0396.diag.cause.1=Element should be a child of Security Header
WSS0396.diag.check.1=Parent of the child should be SecurityHeader
WSS0397.soap.factory.exception=WSS0397: Error getting SOAPFactory instance
WSS0398.soap.body.exception=WSS0398: Error getting SOAPBody
WSS0399.soap.envelope.exception=WSS0399: Error getting SOAPEnvelope
#add log msgs for XMLUtil
#SAML related log messages
WSS0400.saml.null.input=WSS0400: Null Input
WSS0401.saml.incorrect.input=WSS0401: Incorrect Input
WSS0402.saml.missing.element.value=WSS0402: Value of this Element is missing
WSS0403.saml.invalid.action=WSS0403: The action is invalid in its specified namespace
WSS0404.saml.invalid.version=WSS0404: Invalid SAML version Encountered.
WSS0405.saml.list.add.error=WSS0405: Failed to add an object to the list
WSS0406.saml.invalid.element=WSS0406: Input has invalid element
WSS0407.saml.missing.attribute=WSS0407: Missing attribute
WSS0408.saml.element.overflow=WSS0408: Attempted to add more elements than allowed
WSS0409.saml.missing.statement=WSS0409: Assertion has no statements
WSS0410.saml.element.underflow=WSS0410: Attempted to add less element(s) than required
WSS0411.saml.missing.element=WSS0411: Missing element
WSS0412.saml.condition.not.supported=WSS0412: The specified condition is not supported
WSS0413.saml.invalid.date.format=WSS0413: Invalid date format
WSS0414.saml.missing.attribute.value=WSS0414: Missing attribute value
WSS0415.saml.empty.element=WSS0415: Element has no content
WSS0416.saml.signature.invalid=WSS0416: The signature in the SAML Assertion is invalid
WSS0417.saml.timestamp.invalid=WSS0417: Condition (notBefore, notOnOrAfter) validation failed for SAML assertion
WSS0418.saml.import.exception=WSS0418: Exception while importing SAML Token
WSS0419.saml.signature.verify.failed=WSS0419: Exception during Signature verification in SAML Assertion
WSS0420.saml.cannot.find.subjectconfirmation.keyinfo=WSS0420: Unable to locate KeyInfo inside SubjectConfirmation element of SAML Assertion
WSS0421.saml.cannot.subjectconfirmation.keyinfo.not.unique=WSS0421: KeyInfo not unique inside SAML SubjectConfirmation
WSS0422.saml.issuer.validation.failed=WSS0422: Issuer validation failed for SAML Assertion
WSS0423.saml.subject.nameid.validation.failed=WSS0423: Subject NameIdentifier validation failed for SAML Assertion
WSS0424.null.OwnerDocument.element=WSS0424: Element does not have an owner document
WSS0425.unableto.resolve.xpath=WSS0425: Unable to resolve XPath
WSS0426.failed.DSAKeyValue=WSS0426: Exception occurred while trying to get DSA Key Value
WSS0427.unableto.decode.base64=WSS0427: Unable to decode Base64 encoded data
WSS0428.saml.not.found=WSS0428: no SAML Assertion found in the message
WSS0429.saml.authInstant.or.session.parse.failed=WSS0429: error during parsing the authnInstantDate or sessionNotOnOrAfter
WSS0430.saml.getNotBeforeDate.or.getNotOnOrAfterDate.parse.failed=WSS0430: error during parsing the getNotBefore or getNotOnOrAfter
# configuration framework messages from 500
# Adding diagnostics for SEVERE messages only
WSS0500.class.not.messagefilter=WSS0500: Class {0} does not implement MessageFilter
WSS0500.diag.cause.1=Classname not a recognized classname for a MessageFilter
WSS0500.diag.check.1=Check that the class implements MessageFilter
WSS0501.property.not.defined=WSS0501: Property {0} not defined. Returning null
WSS0502.bad.reader.state.1=WSS0502: Bad reader state. Expected {0} but got {1}
WSS0502.diag.cause.1=Element encountered does not match element expected
WSS0502.diag.check.1=Check that the xml file follows schema for defining configuration
WSS0503.bad.reader.state.2=WSS0503: Bad reader state. Expected {0} or {1} or {2} but got {3}
WSS0503.diag.cause.1=Element encountered does not match valid element expected
WSS0503.diag.check.1=Check that the xml file follows schema for defining configuration
WSS0504.class.not.found=WSS0504: Class {0} was not found on the class path
WSS0505.using.default.target.values=WSS0505: Target not specified. Using default values.
WSS0506.target.not.specified.verify=WSS0506: Target not specified in verify.
WSS0507.target.not.specified.decrypt=WSS0507: Target not specified in decrypt.
WSS0508.unableto.set.defaults=WSS0508: Cannot specify default settings after custom settings are added
WSS0508.diag.cause.1=Default settings cannot be specified after custom settings are specified
WSS0508.diag.check.1=Check that no sender operations or receiver requirements are specified in a config. file
WSS0508.diag.check.2=Check that no sender or receiver settings are programmatically added
WSS0509.defaults.already.set=WSS0509: Cannot specify custom settings after default settings are added
WSS0509.diag.cause.1=Custom settings cannot be specified after default settings are specified
WSS0509.diag.check.1=Check that no default settings are programmatically added
WSS0510.cannot.use.keyname=WSS0510: Public Key information to verify a signature should be conveyed in the message
WSS0510.diag.cause.1=Named keys cannot be used for conveying public key information
WSS0511.illegal.boolean.value=WSS0511: Boolean value strings can be either "true"|"false", found: {0}
WSS0511.diag.cause.1=Impermissible boolean value string - valid strings are "true" and "false"
WSS0511.diag.check.1=Check that the boolean value strings are either "true" or "false"
# {0} - attribute name, {1} - element name (e.g.: xwss:X509Token, xwss:Target)
WSS0512.illegal.attribute.name=WSS0512: Unexpected attribute: {0} on {1}
WSS0512.diag.cause.1=Impermissible attribute on a Security Configuration element
WSS0512.diag.check.1=Check that the configuration file is consistent with the security configuration schema
WSS0513.illegal.configuration.element=WSS0513: Unexpected element: {0} in xwss:SecurityConfiguration
WSS0513.diag.cause.1=Impermissible element on xwss:SecurityConfiguration
WSS0513.diag.check.1=Check that the configuration file is consistent with the security configuration schema
WSS0514.illegal.nested.element=WSS0514: Unexpected child element: {0} in {1}
WSS0514.diag.cause.1=Impermissible child element in a Security Configuration element
WSS0514.diag.check.1=Check that the configuration file is consistent with the security configuration schema
WSS0515.illegal.keyreference=WSS0515: Impermissible value for key reference string: {0}
WSS0515.diag.cause.1=Impermissible value for key reference string
WSS0515.diag.check.1=Check that the configuration file is consistent with the security configuration schema
# {0} - e.g. http://java.sun.com/xml/ns/xwss/config#Timestamp, {1} - element name
WSS0516.duplicate.configuration.element=WSS0516: Duplicate element: {0} in {1}
WSS0516.diag.cause.1=Impermissible duplicate element on a Security Configuration Element
WSS0516.diag.check.1=Check that the configuration file is consistent with the security configuration schema
# Usage not found. TODO Remove
#WSS0517.duplicate.configuration.element=WSS0517: Multiple configuration elements not allowed on: {0}
WSS0517.diag.cause.1=Impermissible duplicate element on a Security Configuration Element
WSS0517.diag.check.1=Check that the configuration file is consistent with the security configuration schema
WSS0518.illegal.contentOnly.use=WSS0518: ContentOnly flag may only be present on Target elements that are child elements of Encrypt or requireEncryption
WSS0519.illegal.attribute.value=WSS0519: Illegal/Missing attribute value for: {0}
WSS0519.diag.cause.1=Non-permissable/missing attribute value
WSS0519.diag.check.1=Check that the configuration file is consistent with the security configuration schema
WSS0520.illegal.configuration.state=WSS0520: Illegal configuration state of element
WSS0520.diag.cause.1=xwss:SymmetricKey is not permitted along with xwss:X509Token
WSS0520.diag.check.1=Check that the configuration file is consistent with the security configuration schema
# helpers/ messages from 600
# Adding diagnostics for SEVERE messages only
WSS0600.illegal.token.reference=WSS0600: Key cannot be located for the TokenReference (ds:KeyInfo)
WSS0600.diag.cause.1=A Key cannot be located in SecurityEnvironment for the Token Reference
WSS0600.diag.check.1=Check that the certificate referred to is valid and present in the Keystores
WSS0601.unsupported.keyinfoWSS0601.illegal.key.value=WSS0601: Key cannot be located for the KeyValue (ds:KeyInfo) due to {0}
WSS0601.diag.cause.1=A Key cannot be located in SecurityEnvironment for the KeyValue
WSS0601.diag.check.1=Check that the certificate referred to is valid and present in the Keystores
WSS0602.illegal.x509.data=WSS0602: Key cannot be located for the X509Data (ds:KeyInfo) due to {0}
WSS0602.diag.cause.1=A Key cannot be located in SecurityEnvironment for the X509Data
WSS0602.diag.check.1=Check that the certificate referred to is valid and present in the Keystores
WSS0603.xpathapi.transformer.exception=WSS0603: XPathAPI TransformerException due to {0} in finding element with matching wsu:Id/Id/SAMLAssertionID
WSS0603.diag.cause.1=XPathAPI TransformerException in finding element with matching wsu:Id/Id/SAMLAssertionID
WSS0603.diag.check.1=Refer your XPathAPI documentation
WSS0604.cannot.find.element=WSS0604: Cannot find element with matching wsu:Id/Id/SAMLAssertionID
WSS0604.diag.cause.1=An element with the given wsu:Id/Id/SAMLAssertionID cannot be located
WSS0605.str.transform.exception=WSS0605: Error applying STR-Transform due to {0}
WSS0605.diag.cause.1=Error applying STR-Transform
WSS0606.str.transform.exception=WSS0606: Input Node Set to STR-Transform is empty
WSS0606.diag.cause.1=Input Node Set to STR-Transform is empty
WSS0606.diag.check.1=Check that the Referenced Node (to be STR-Transformed) in ds:SignedInfo is valid
WSS0607.str.transform.exception=WSS0607: DOMException in updating SOAPElement representing X509Token
WSS0607.diag.cause.1=DOMException in removing "EncodingType" attribute on SOAPElement representing X509Token
WSS0608.illegal.reference.mechanism=WSS0608: Illegal Reference Mechanism in SecurityTokenReference
WSS0608.diag.cause.1=The Reference Mechanism in the SecurityTokenReference is not supported
WSS0608.diag.check.1=Check that the Reference Mechanism is either Direct/KeyIdentifier/X509IssuerSerial
# impl/ messages from 650
# Adding diagnostics for SEVERE messages only
WSS0650.userpwd.file.notfound=WSS0650: Username/Password data file not found
WSS0650.diag.cause.1=Username/Password data file not found
WSS0650.diag.check.1=Check that the system property com.sun.xml.wss.usersFile is set
WSS0651.parser.config.error=WSS0651: Failed to create JAXP DocumentBuilder instance
WSS0651.diag.cause.1=Failed to create JAXP DocumentBuilder instance
WSS0652.error.parsing.file=WSS0652: Error parsing {0} file
WSS0652.diag.cause.1=Error parsing xws-security-users file
WSS0653.error.reading.file=WSS0653: Error reading {0} file
WSS0653.diag.cause.1=Error reading xws-security-users file
WSS0654.soap.exception=WSS0654: Error creating javax.xml.soap.Name for wsu:Id due to {0}
WSS0654.diag.cause.1=Error creating javax.xml.soap.Name for wsu:Id
WSS0654.diag.check.1=Refer your SAAJ API Documentation
WSS0655.error.creating.headerblock=WSS0655: Error creating an instance of header block for element {0}
SS0655.diag.cause.1=The Class object does not correspond to a header block identified by the SOAPElement
WSS0655.diag.check.1=Check that the Class object corresponds to the header block identified by the SOAPElement
WSS0656.keystore.file.notfound=WSS0656: Keystore file not found
WSS0656.diag.cause.1=The Keystore URL is not specified/invalid in server.xml
WSS0656.diag.cause.2=A Keystore file does not exist in $user.home
WSS0656.diag.check.1=Check that the keystoreFile attribute is specified on SSL Coyote HTTP/1.1 Connector element in server.xml and is valid
WSS0656.diag.check.2=Check that a keystore file exists in $user.home
WSS0657.config.file.notfound=WSS0657: tomcat-users.xml cannot be found
WSS0657.diag.cause.1=tomcat-users.xml cannot be found
# keyinfo/ messages from 700
# Adding diagnostics for SEVERE messages only
WSS0700.security.environment.notset=WSS0700: An instance of SecurityEnvironment is not set on SecurableSoapMessage
WSS0700.diag.cause.1=An instance of SecurityEnvironment is not set on SecurableSoapMessage
WSS0700.diag.check.1=Check that setSecurityEnvironment() is called on the SecurableSoapMessage
WSS0700.diag.check.2=Check that SetSecurityEnvironmentFilter is applied on SecurableSoapMessage
WSS0701.cannot.locate.certificate=WSS0701: Cannot locate an X509v3 Certificate to obtain the KeyIdentifier value for alias: {0}
WSS0701.diag.cause.1=No X509v3 Certificate can be located for the alias in Keystore
WSS0701.diag.cause.2=If no alias has been specified for signing, no default certificate is available
WSS0701.diag.check.1=Check that a default certificate is available and/or a valid alias is used
WSS0702.no.subject.keyidentifier=WSS0702: The X509v3 Certificate (for alias: [{0}]) does not contain an Subject Key Identifier
WSS0702.diag.cause.1=The X509v3 Certificate for the given alias does not contain a subject key identifier
WSS0702.diag.check.1=Check that a valid X509v3 Certificate is present in Keystores
WSS0703.unsupported.operation=WSS0703: Unsupported Operation - insertKey(SecurityTokenReference, SecurableSoapMessage) - on KeyNameStrategy
WSS0703.diag.cause.1=insertKey(SecurityTokenReference, SecurableSoapMessage) is not supported on KeyNameStrategy
WSS0704.null.session.key=WSS0704: Session KeyName has not been set on the SecurityEnvironment instance
WSS0704.diag.cause.1=Agreement name: SESSION-KEY-VALUE, has not been set on the SecurityEnvironment instance
WSS0704.diag.check.1=Check that the agreement name: SESSION-KEY-VALUE, is set on SecurityEnvironment using setAgreementProperty()
WSS0705.unsupported.operation=WSS0705: Unsupported Operation - setCertificate(X509Certificate) - on KeyNameStrategy
WSS0705.diag.cause.1=setCertificate(X509Certificate) is not supported on KeyNameStrategy
# {0} - key type e.g.: No Matching Certificate for : SunPKCS11-NSS RSA public key, 1024 bits (id 373, session object) modulus: 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 public exponent: 65537 found in KeyStore or TrustStore
WSS0706.no.matching.cert=WSS0706: Error: No Matching Certificate for : {0} found in KeyStore or TrustStore.
WSS0707.null.truststore=WSS0707: Error: No entry in TrustStore populated by TrustStoreCallback.
WSS0708.no.digest.algorithm=WSS0708: Digest algorithm SHA-1 not found
WSS0709.error.getting.rawContent=WSS0709: Error while getting certificate's raw content
# {0} - key type e.g.: No Matching Certificate for : SunPKCS11-NSS RSA public key, 1024 bits (id 373, session object) modulus: 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 public exponent: 65537 found in KeyStore
WSS0710.no.matching.cert.keystore=WSS0710: Error: No Matching Certificate for : {0} found in KeyStore.
WSS0711.error.match.cert.for.decoded.string=WSS0711: Error: An Error occurred while matching certification for Decoded String.
WSS0712.error.adjust.skew.freshness.time=WSS0712: An Error occurred while adjusting Current time with Skewed & Freshness time .
WSS0713.error.in.certstore.lookup=WSS0713: An Exception occurred while looking up Certstore
WSS0714.error.getting.userClass=WSS0714: Could not find User Class {0}
WSS0715.exception.creating.newinstance=WSS0715: Exception occurred while creating new instance
WSS0716.failed.validateSAMLAssertion=WSS0716: Failed to validate SAML Assertion
WSS0717.no.SAMLCallbackHandler=WSS0717: A Required SAML CallbackHandler was not specified in configuration : Cannot Populate SAML Assertion
WSS0718.exception.invoking.samlHandler=WSS0718: An exception occurred when invoking the user supplied SAML CallbackHandler
WSS0719.error.getting.longValue=WSS0719: Error getting long value
# reference/ messages from 750
# Adding diagnostics for SEVERE messages only
WSS0750.soap.exception=WSS0750: Error creating javax.xml.soap.SOAPElement for {0} due to {1}
WSS0750.diag.cause.1=Error creating javax.xml.soap.SOAPElement
WSS0750.diag.check.1=Refer your SAAJ API Documentation
WSS0751.invalid.data.reference=WSS0751: Invalid SOAPElement ({0}) passed to DirectReference()
WSS0751.diag.cause.1=The localname of the SOAPElement passed is not "Reference"
WSS0751.diag.cause.2=The namespace URI of the SOAPElement passed does not conform to WSS specification
WSS0751.diag.check.1=Check that a SOAPElement conformant to spec. is passed
WSS0752.invalid.embedded.reference=WSS0751: Invalid SOAPElement ({0}) passed to EmbeddedReference()
WSS0752.diag.cause.1=The localname of the SOAPElement passed is not "Embedded"
WSS0752.diag.cause.2=The namespace URI of the SOAPElement passed does not conform to WSS Spec.
WSS0752.diag.check.1=Check that a SOAPElement conformant to spec. is passed
WSS0753.missing.embedded.token=WSS0753: Missing embedded token in wsse:Embedded element
WSS0753.diag.cause.1=An embedded token in wsse:Embedded element is missing
WSS0753.diag.check.1=Check that the token element is conformant to WSS specification
WSS0754.token.already.set=WSS0754: Token on EmbeddedReference has already been set
WSS0754.diag.cause.1=Token on EmbeddedReference has already been set
WSS0754.diag.cause.2=A SOAPElement representation of EmbeddedReference containing the Token is used to create the EmbeddedReference instance
WSS0755.soap.exception=WSS0755: Error embedding token in TokenReference due to {0}
WSS0755.diag.cause.1=Error embedding token in TokenReference
WSS0756.invalid.key.identifier=WSS0756: Invalid SOAPElement ({0}) passed to KeyIdentifier()
WSS0756.diag.cause.1=Error creating SOAPElement for wsse:KeyIdentifier
WSS0756.diag.check.1=Check your SAAJ API Documentation
WSS0757.error.setting.reference=WSS0757: Error adding KeyIdentifier Value to wsse:KeyIdentifier
WSS0757.diag.cause.1=Error adding KeyIdentifier value to wsse:KeyIdentifer
WSS0757.diag.check.1=Check your SAAJ API Documentation
WSS0758.soap.exception=WSS0758: Error creating javax.xml.soap.Name for {0} due to {1}
WSS0758.diag.cause.1=Error creating javax.xml.soap.Name
WSS0758.diag.check.1=Refer your SAAJ API Documentation
WSS0759.error.creating.issuerserial=WSS0759: Error creating X509IssuerSerial instance
WSS0759.diag.cause.1=An X509IssuerSerial instance cannot be created
WSS0759.diag.check.1=Check that the SOAPElement passed to the constructor is conformant to spec. (and has X509IssuerSerial child elements)
WSS0760.warning.optionaltarget.enforce.ignored=WSS0760: Warning enforce attribute value 'true' on Optional Target ignored.
WSS0761.context.not.instanceof.servletendpointcontext=WSS0761: Context supplied is not an instanceof ServletEndpointContext or com.sun.xml.wss.ProcessingContext
WSS0761.diag.cause.1=require context argument to be either a ServletEndpointContext or a com.sun.xml.wss.ProcessingContext
WSS0761.diag.check.1=Check the context argument passed to getRequesterSubject
WSS0762.unsupported.encodingtype=WSS0762: Unsupported EncodingType {0} On KeyIdentifier
WSS0762.diag.cause.1=The encodingType on KeyIdentifier is not supported
WSS0762.diag.check.1=Check the value of the encodingType property on KeyIdentifier
WSS0763.exception.issuername=WSS0763: Exception {0} while getting Issuer Name
WSS0763.diag.cause.1=Exception while getting Issuer Name
WSS0763.diag.check.1=Check IssuerName is correctly present in the SOAP Message
#################
#Policy related logs from 0801-0900
WSS0801.illegal.securitypolicy=Illegal SecurityPolicy Type
WSS0801.diag.cause.1=SecurityPolicy Type is illegal
WSS0801.diag.check.1=Check that policy is one of WSSPolicy or MessagePolicy or ApplicationSecurityConfiguration
WSS0802.securitypolicy.notsatisfied=SecurityPolicy {0} is not satisfied
WSS0802.diag.cause.1=SecurityPolicy not met
WSS0802.diag.check.1=Ensure that all policy requirements are valid and met
WSS0803.soapmessage.notset=javax.xml.soap.SOAPMessage parameter not set in the ProcessingContext
WSS0803.diag.cause.1=SOAPMessage is null
WSS0803.diag.check.1=Ensure that SOAPMessage is set appropriately in the ProcessingContext
WSS0804.callback.handler.notset=SecurityEnvironment/javax.security.auth.callback.CallbackHandler implementation not set in the ProcessingContext
WSS0804.diag.cause.1=Callback handler is null
WSS0804.diag.check.1=Ensure that the Callback handler is set appropriately in the ProcessingContext
#warning
WSS0805.policy.null=Policy is null
WSS0806.static.context.null=Static context is null
WSS0807.no.body.element=No body element is found
WSS0807.diag.cause.1=SOAPBody element is not found in the message
WSS0807.diag.check.1=Look at underlying exception for clues
WSS0808.no.body.element.operation=No body element identifying an operation is found
WSS0808.diag.cause.1=SOAPBody element identifying operation not found
WSS0808.diag.check.1=SOAPBody should contain child with operation
WSS0809.fault.WSSSOAP=WSS0809: WSS SOAP Fault Occurred
WSS0810.method.invocation.failed=WSS0810: Method Invocation Failed
WSS0811.exception.instantiating.aliasselector=WSS0811: Exception occurred while instantiating User supplied AliasSelector
WSS0812.exception.instantiating.certselector=WSS0812: Exception occurred while instantiating User supplied CertSelector
WSS0813.failedto.getcertificate=WSS0813: IO Exception occurred: failed to get certificate from truststore
# {0} - target in policy (e.g.: "MessageID"/"BinarySecurityToken ") , {1} - "Signature"/"Encryption" (policy type) e.g.: Policy verification error:Missing target BinarySecurityToken for Signature
WSS0814.policy.verification.error.missing.target=WSS0814: policy verification error, missing target {0} for {1}
WSS0815.Nonce.repeated.error=WSS: Nonce Repeated : Nonce Cache already contains the nonce value {0}
WSS0816.base64.decoding.error=WSS0816: Base64 decoding exception
WSS0817.keystore.login.module.login.error=WSS0817: error occurred while keystoreloginmodule login
WSS0818.error.putting.certificate.epridentity=WSS0818: error during putting the server certificate in EPR Identity
WSS0819.error.getting.certificate.epridentity=WSS0819: error occurred while trying to get certificate from Identity extension
WSS0820.error.validate.certificate.epridentity=WSS0820: exception during validating the server certificate obtained from PER Identity
WSS0821.certificate.not.found.for.alias=WSS0821: certificate not found corresponding to the alias {0}
WSS0822.error.validating.server.certificate=WSS0822: Could not validate the server certificate, not using it
WSS0823.alias.notfound.for.aliasSelector=WSS0823: alias retrieved using the aliasSelector is null
WSS0824.using.server.certificate.from.eprIdentity=WSS0824: The certificate found in the server wsdl or by server cert property is valid, so using it
WSS0825.error.validate.nonce=WSS0825: Error during validating Nonce from Backing Store
WSS0826.error.initialize.backingstore=WSS0826: Error during initialization of Backing store
WSS0827.error.removing.expired.entries=WSS0827: Error during removing expired entries from Backing store
###########
# Adding BSP related requirement failures
BSP3227.Single.Timestamp=BSP3227: A SECURITY_HEADER must not contain more than one TIMESTAMP.
BSP3203.Onecreated.Timestamp=BSP3203: A TIMESTAMP must have exactly one wsu:Created element child.
BSP3224.Oneexpires.Timestamp=BSP3203: A TIMESTAMP must have exactly one wsu:Expires element child.
BSP3222.element_not_allowed_under_timestmp = BSP3222: {0} is not allowed under TIMESTAMP.
BSP3221.CreatedBeforeExpires.Timestamp=BSP3221: wsu:Expires must appear after wsu:Created in the Timestamp
BSP3225.createdValueType.Timestamp=BSP3225: A wsu:Created element within a TIMESTAMP must not include a ValueType attribute.
BSP3226.expiresValueType.Timestamp=BSP3226: A wsu:Expires element within a TIMESTAMP must not include a ValueType attribute.
BSP4201.PasswordType.Username=BSP4201: A wsse:UsernameToken/wsse:Password element in a SECURITY_HEADER must specify a Type attribute.
BSP3029.EncodingType.NotPresent=BSP3029: Any wsse:BinarySecurityToken in a SECURE_ENVELOPE must have an EncodingType attribute.
BSP3030.EncodingType.Invalid=BSP3030: EncodingType attribute value in wsse:BinarySecurityToken is invalid.
BSP3031.ValueType.NotPresent=BSP3031: Any wsse:BinarySecurityToken element in a SECURE_ENVELOPE must have a ValueType attribute.
BSP3104.envelopedSignature.discoraged = BSP3104: Enveloped Signature is discouraged by BSP 1.1
BSP5602.encryptedkey.recipient = BSP5602 : EncryptedKey with ID {0} must not contain Recipient attribute.
BSP5603.encryptedkey.encryptionmehod = BSP5603: EncryptedKey element with ID {0} must contain an EncryptionMethod child element.
BSP5622.encryptedkey.mimetype = BSP 5622 : EncryptedKey element with ID {0} must not contain an MimeType attribute.
BSP5623.encryptedkey.encoding = BSP 5623 : EncryptedKey element with ID {0} must not contain an encoding attribute.
BSP5601.encrypteddata.encryptionmethod = BSP 5601 : EncryptedData element ID {0} must contain EncryptionMethod child element.
BSP5624.encrypteddata.idattribute = BSP 5624 : EncryptedData element must have ID attribute.
BSP5629.encrypteddata.keyinfo = BSP 5629 : EncryptedData must contain KeyInfo child element as it is not being referenced from EncryptedKey element.
BSP5426.encryptedkeyinfo = BSP 5426 : KeyInfo element under EncryptedKey or EncryptedData with ID {0} must contain SecurityTokenReference child element.
BSP5608.encrypteddata.refuri = BSP 5608 : DataReference element under EncryptedData must contain a URI attribute containing a shorthand XPointer.
BSP3006.encryptedkey.refuri = BSP 3006 : DataReference element under EncryptedKey must contain a URI attribute containing a shorthand XPointer.
BSP5620.encrypteddata.uri = BSP 5620 : Data encryption algorithm must be one of "http://www.w3.org/2001/04/xmlenc#tripledes-cbc","http://www.w3.org/2001/04/xmlenc#aes128-cbc" or "http://www.w3.org/2001/04/xmlenc#aes256-cbc".
BSP5626.keyencryptionalgo = BSP 5626 : Key encryption algorithm must be "http://www.w3.org/2001/04/xmlenc#rsa-1_5" or "http://www.w3.org/2001/04/xmlenc#rsa-oaep-mgf1p" or "http://www.w3.org/2001/04/xmlenc#kw-tripledes" or "http://www.w3.org/2001/04/xmlenc#kw-aes128" or "http://www.w3.org/2001/04/xmlenc#kw-aes256".
BSP3057.str.not.ref.str = BSP 3057 : Reference element under SecurityTokenReference must not reference another SecurityTokenReference element.
BSP3064.str.not.ref.str.embedded = BSP 3064 : Reference element under wsse:SecurityTokenReference must not reference wsse:Embedded element which is a child element of another wsse:SecurityTokenReference element.
BSP3059.str.value.type = BSP 3059 : Reference element under wsse:SecurityTokenReference must have a ValueType attribute.
BSP3058.str.value.type.notempty = BSP 3058 : ValueType attribute for Reference element under wsse:SecurityTokenReference must have a value specified.
BSP3062.str.uriattribute = BSP 3062 : Reference element under wsse:SecurityTokenReference must have a URI attribute.
BSP3027.str.key.name = BSP 3027 : wsse:SecurityTokenReference must not contain KeyName as ds:KeyName.
BSP3028.str.keyidentifier = BSP 3028 : ValueType attribute for wsse:SecurityTokenReference element must not be empty.
BSP3071.str.encodingType = BSP 3071 : EncodingType attribute for wsse:SecurityTokenReference element must have a value "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary".
BSP5204.str.internal.str.reference = BSP 5204 : wsse:SecurityTokenReference to an internal security token having an ID attribute must contain a URI attribute with a shorthand XPointer value.
BSP5416.signature_transform = BSP 5416 : A Signature must contain a Transform child element.
BSP5423.signature_transform_algorithm = BSP 5423 : A Signature transform algorithm must have a value of "http://www.w3.org/2001/10/xml-exc-c14n#" or "http://www.w3.org/2002/06/xmldsig-filter2" or "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#STR-Transform" or "http://www.w3.org/2000/09/xmldsig#enveloped-signature" or "http://docs.oasis-open.org/wss/oasis-wss-SwAProfile-1.1#Attachment-Content-Signature-Transform" or "http://docs.oasis-open.org/wss/oasis-wss-SwAProfile-1.1#Attachment-Complete-Signature-Transform".
BSP5420.digest.method = BSP 5420 : A Digest algorithm should have value "http://www.w3.org/2000/09/xmldsig#sha1".
BSP5421.signature.method = BSP5421 : Signature Method should have value of "http://www.w3.org/2000/09/xmldsig#hmac-sha1" or "http://www.w3.org/2000/09/xmldsig#rsa-sha1".
#copied from impl-opt domain logger
WSS1601.ssl.not.enabled = WSS1601: Security Requirements not met - Transport binding configured in policy but incoming message was not SSL enabled
#KerberosLogin
WSS1650.kerberos.key.warning = The Service Principal in KerberosConfig {0} does not match the GSSContext TargetName {1}