mq5.0-source.src.buildant.paths.xml Maven / Gradle / Ivy
<?xml version="1.0" encoding="UTF-8"?>
<!--
DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
Copyright (c) 2010-2012 Oracle and/or its affiliates. All rights reserved.
The contents of this file are subject to the terms of either the GNU
General Public License Version 2 only ("GPL") or the Common Development
and Distribution License("CDDL") (collectively, the "License"). You
may not use this file except in compliance with the License. You can
obtain a copy of the License at
https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
or packager/legal/LICENSE.txt. See the License for the specific
language governing permissions and limitations under the License.
When distributing the software, include this License Header Notice in each
file and include the License file at packager/legal/LICENSE.txt.
GPL Classpath Exception:
Oracle designates this particular file as subject to the "Classpath"
exception as provided by Oracle in the GPL Version 2 section of the License
file that accompanied this code.
Modifications:
If applicable, add the following below the License Header, with the fields
enclosed by brackets [] replaced by your own identifying information:
"Portions Copyright [year] [name of copyright owner]"
Contributor(s):
If you wish your version of this file to be governed by only the CDDL or
only the GPL Version 2, indicate your decision by adding "[Contributor]
elects to include this software in this distribution under the [CDDL or GPL
Version 2] license." If you don't indicate a single choice of license, a
recipient has the option to distribute your version of this file under
either the CDDL, the GPL Version 2 or to extend the choice of license to
its licensees as provided above. However, if you add GPL Version 2 code
and therefore, elected the GPL Version 2 license, then the option applies
only if the new code is made subject to such option by the copyright
holder.
-->
<project name="paths" >
<!-- ==================== jmqExternal =========================== -->
<!-- XXX - I'd really like to look set this by retrieving a
composite property e.g. jmqexternal=${jmqexternal.${arch}
but I cant get it to work -->
<condition property="jmqexternal" value="${jmqexternal.solaris}">
<and>
<equals arg1="${arch}" arg2="solaris"/>
<isset property="jmqexternal.solaris"/>
</and>
</condition>
<condition property="jmqexternal" value="${jmqexternal.linux}">
<and>
<equals arg1="${arch}" arg2="linux"/>
<isset property="jmqexternal.linux"/>
</and>
</condition>
<condition property="jmqexternal" value="${jmqexternal.win32}">
<and>
<equals arg1="${arch}" arg2="win32"/>
<isset property="jmqexternal.win32"/>
</and>
</condition>
<condition property="jmqexternal" value="-unset-">
<not>
<isset property="jmqexternal"/>
</not>
</condition>
<!-- ==================== sbc =========================== -->
<!-- XXX - I'd really like to look set this by retrieving a
composite property e.g. sbc=${sbc.${arch}}
but I cant get it to work -->
<condition property="sbc" value="${sbc.solaris}">
<and>
<equals arg1="${arch}" arg2="solaris"/>
<isset property="sbc.solaris"/>
</and>
</condition>
<condition property="sbc" value="${sbc.linux}">
<and>
<equals arg1="${arch}" arg2="linux"/>
<isset property="sbc.linux"/>
</and>
</condition>
<condition property="sbc" value="${sbc.win32}">
<and>
<equals arg1="${arch}" arg2="win32"/>
<isset property="sbc.win32"/>
</and>
</condition>
<condition property="sbc" value="-unset-">
<not>
<isset property="sbc"/>
</not>
</condition>
<!-- ==================== locations =========================== -->
<!-- useJMQExternal determines if jmq external is used -->
<!-- fallbacks -->
<property name="useJMQExternal" value="true"/>
<property name="jmqexternal" value="-unset fallback-"/>
<!-- packager.artifacts -->
<condition property="packager.artifacts"
value="${ws.top.dir}/main/packager-opensource/target/artifacts/jars">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<!-- javaee home -->
<condition property="javaeehome"
value="${ws.top.dir}/extlib">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="javaeehome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- servlet home -->
<condition property="servlethome"
value="${buildcfg.dir}/tools/ri/servlet2.5/lib">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="servlethome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- grizzly home -->
<condition property="grizzlyhome"
value="${ws.top.dir}/extlib">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="grizzlyhome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- nucleus home -->
<condition property="nucleushome"
value="${ws.top.dir}/extlib">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="nucleushome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- bdb je home -->
<condition property="bdbhome"
value="${ws.top.dir}/extlib">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="bdbhome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- coherence home -->
<condition property="coherencehome"
value="${ws.top.dir}/extlib">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="coherencehome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- jta home -->
<condition property="jtahome"
value="${ws.top.dir}/extlib">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="jtahome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- javahelphome home -->
<condition property="javahelphome"
value="${ws.top.dir}/extlib">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="javahelphome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- jaf home -->
<condition property="jafhome"
value="${sbc}/jaf/1.0.3/b34/share/lib">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="jafhome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- javamail home -->
<condition property="javamailhome"
value="${sbc}/javamail/1.3.2/b34/share/lib">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="javamailhome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- audit home -->
<condition property="audithome"
value="${jmqexternal}/audit/lib">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="audithome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- connector home -->
<condition property="connectorhome"
value="${buildcfg.dir}/tools/ri/j2ee-connector">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="connectorhome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- j2ee mgt home -->
<condition property="j2eemgthome"
value="${jmqexternal}/j2ee-management">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="j2eemgthome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- jaxm home -->
<condition property="jaxmhome"
value="${jmqexternal}/jaxm">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="jaxmhome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- jaxp home -->
<condition property="jaxphome"
value="${jmqexternal}/aspkgs-mq36/jaxp">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="jaxphome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- soap home -->
<condition property="soaphome"
value="${sbc}/jwsdp/2.0_b28/saaj/lib">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="soaphome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- jndi home -->
<condition property="jndihome"
value="${jmqexternal}/jndi">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="jndihome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- jndifs home -->
<condition property="jndifshome"
value="${jmqexternal}/jndifs">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="jndifshome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- dom4j home -->
<condition property="dom4jhome"
value="${jmqexternal}/dom4j">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="dom4jhome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- jemmyhome home -->
<condition property="jemmyhome"
value="${jmqexternal}/qa_extjars/jemmy">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="jemmyhome"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
<!-- jmxhome home -->
<condition property="jmxhome"
value="${jmqexternal}/jdmk/lib">
<and>
<istrue value="${useJMQExternal}"/>
</and>
</condition>
<condition property="jmx_jar"
value="${localJarLocation}">
<and>
<isfalse value="${useJMQExternal}"/>
</and>
</condition>
</project>