mq5.0-source.src.share.install.installer Maven / Gradle / Ivy
#!/bin/ksh
#
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
#
# Copyright (c) 2000-2010 Oracle and/or its affiliates. All rights reserved.
#
# The contents of this file are subject to the terms of either the GNU
# General Public License Version 2 only ("GPL") or the Common Development
# and Distribution License("CDDL") (collectively, the "License"). You
# may not use this file except in compliance with the License. You can
# obtain a copy of the License at
# https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
# or packager/legal/LICENSE.txt. See the License for the specific
# language governing permissions and limitations under the License.
#
# When distributing the software, include this License Header Notice in each
# file and include the License file at packager/legal/LICENSE.txt.
#
# GPL Classpath Exception:
# Oracle designates this particular file as subject to the "Classpath"
# exception as provided by Oracle in the GPL Version 2 section of the License
# file that accompanied this code.
#
# Modifications:
# If applicable, add the following below the License Header, with the fields
# enclosed by brackets [] replaced by your own identifying information:
# "Portions Copyright [year] [name of copyright owner]"
#
# Contributor(s):
# If you wish your version of this file to be governed by only the CDDL or
# only the GPL Version 2, indicate your decision by adding "[Contributor]
# elects to include this software in this distribution under the [CDDL or GPL
# Version 2] license." If you don't indicate a single choice of license, a
# recipient has the option to distribute your version of this file under
# either the CDDL, the GPL Version 2 or to extend the choice of license to
# its licensees as provided above. However, if you add GPL Version 2 code
# and therefore, elected the GPL Version 2 license, then the option applies
# only if the new code is made subject to such option by the copyright
# holder.
#
PRODUCTNAME="mq"
ORIG_ARGS=$@
# binaries needed on both Solaris, Linux, etc.
BASENAME=/bin/basename
CAT=/bin/cat
#CD=/bin/cd
CHMOD=/bin/chmod
CP=/bin/cp
CUT=/bin/cut
DIRNAME=/usr/bin/dirname
CPIO=/bin/cpio
FIND=/usr/bin/find
ECHO=/bin/echo
EGREP=/bin/egrep
ID=/usr/bin/id
MKDIR=/bin/mkdir
_PWD=/bin/pwd
RM=/bin/rm
SED=/bin/sed
SU=/bin/su
TOUCH=/bin/touch
UNAME=/bin/uname
XAUTH=/openwin/bin/xauth,/usr/X11R6/bin/xauth
NAME=`${BASENAME} $0`
MYDIR=`${DIRNAME} $0`
MYDIR=`cd ${MYDIR}; ${_PWD}`
ENGINE_DIR=${MYDIR}/opt/sun/install
META_DATA_DIR=
INIT_CONFIG_DIR=
# global settings
JAVAHOME="" # java home path
JAVA_OPTIONS="" # java options
INSTALLPROPS="" # install specific properties
# user options
DRYRUN=
SILENT=
ANSWERFILE=
ALTROOT=
DEBUGLEVEL="INFO"
MEDIALOC=
#LOGDIR=/tmp
INSTALL_PROPS=install.properties
#point the java home to local media image location
BUNDLED_JAVA_JRE_LOC=${MYDIR}
#-------------------------------------------------------------------------------
# usage only: define what parameters are available here
# input(s): exitCode
#-------------------------------------------------------------------------------
usage() {
${CAT} <
Specify an answer file to be used by installer in non interactive mode.
-h
Show usage help
-s
Silent mode. No output will be displayed. Typically used with an answer file
specified with -a
-n
Dry run mode. Does not install anything. Your install responses are saved to
and can be used with -a to replicate this install.
-r
Register product. Does not install anything. Runs the installer's product
registration screens.
Exit status
0 Success
>0 An error occurred
Usage examples:
Generate answer file
installer -n file1
Using an answer file in silent mode
installer -a file1 -s
EOF
exit $1
}
#-------------------------------------------------------------------------------
# perform actual operation for the script: install/uninstall
# input(s): none
# output(s): instCode
#-------------------------------------------------------------------------------
perform() {
REG_CP="${MYDIR}/install-lib/classes"
REG_CP="${REG_CP}:${MYDIR}/install-lib/registration/commons-codec-1.3.jar"
REG_CP="${REG_CP}:${MYDIR}/install-lib/registration/registration-api.jar"
REG_CP="${REG_CP}:${MYDIR}/install-lib/registration/registration-impl.jar"
REG_CP="${REG_CP}:${MYDIR}/install-lib/registration/sysnet-all.jar"
ENGINE_OPS="-p Default-Product-ID=${PRODUCTNAME}"
ENGINE_OPS="${ENGINE_OPS} -p Init-Config-Locations=${PRODUCTNAME}:${INIT_CONFIG_DIR}"
ENGINE_OPS="${ENGINE_OPS} -p UI-Options=internalBrowserOnly"
ENGINE_OPS="${ENGINE_OPS} -p Merge-Config-Data=false"
ENGINE_OPS="${ENGINE_OPS} -m file://${META_DATA_DIR}/"
ENGINE_OPS="${ENGINE_OPS} -i file://${MYDIR}/Product"
ENGINE_OPS="${ENGINE_OPS} -a ${MYDIR}/${INSTALL_PROPS}"
ENGINE_OPS="${ENGINE_OPS} -C ${REG_CP}"
ENGINE_OPS="${ENGINE_OPS} -p Exclude-JVMs=${MYDIR}"
JAVA_OPTIONS="-Dmq.install.servicetag.registry.relpath=${ST_REG_RELPATH}"
if [ -n "${DRYRUN}" ] ; then
ENGINE_OPS="${ENGINE_OPS} -n ${DRYRUN}"
fi
if [ -n "${SILENT}" ] ; then
ENGINE_OPS="${ENGINE_OPS} -p Display-Mode=SILENT"
fi
if [ -n "${ANSWERFILE}" ] ; then
ENGINE_OPS="${ENGINE_OPS} -a ${ANSWERFILE}"
fi
if [ -n "${ALTROOT}" ] ; then
ENGINE_OPS="${ENGINE_OPS} -R ${ALTROOT}"
fi
if [ -n "${LOGLEVEL}" ] ; then
ENGINE_OPS="${ENGINE_OPS} -l ${LOGLEVEL}"
fi
if [ -n "${LOGDIR}" ] ; then
ENGINE_OPS="${ENGINE_OPS} -p Logs-Location=${LOGDIR}"
fi
if [ -n "${JAVA_HOME}" ] ; then
ENGINE_OPS="${ENGINE_OPS} -j ${JAVA_HOME}"
fi
if [ -n "${INSTALLPROPS}" ] ; then
ENGINE_OPS="${ENGINE_OPS} ${INSTALLPROPS}"
fi
${ENGINE_DIR}/bin/engine-wrapper -J "${JAVA_OPTIONS}" ${ENGINE_OPS}
instCode=$?
}
#-------------------------------------------------------------------------------
# retrieve bundled JVM from Media based on os and platfo${RM}
# input(s): none
# output(s): JAVAMEDIAPATH
#-------------------------------------------------------------------------------
getBundledJvm() {
JAVAMEDIAPATH=""
case `${UNAME} -s` in
"SunOS")
case `${UNAME} -p` in
"sparc")
JAVAMEDIAPATH="usr/jdk/latest"
;;
"i386")
JAVAMEDIAPATH="usr/jdk/latest"
;;
*)
${ECHO} "Unknown platform, exiting"
exit 1
;;
esac
;;
"Linux")
JAVAMEDIAPATH="usr/java/jre1.5.0_15"
;;
"HP-UX")
JAVAMEDIAPATH="HP-UX"
;;
"AIX")
JAVAMEDIAPATH="AIX"
;;
*)
"Do not recognize `uname -p` platform, no JVM available"
exit 1
;;
esac
}
useBundledJvm() {
getBundledJvm
JAVA_HOME=${BUNDLED_JAVA_JRE_LOC}/${JAVAMEDIAPATH}
if [ ! -d ${JAVA_HOME} ] ; then
if [ ! -n "${SILENT}" ] ; then
${ECHO} "${JAVA_HOME} must be the root directory of a valid JVM installation"
${ECHO} "Please provide JAVA_HOME as argument with -h option and proceed."
fi
exit 1
fi
}
#-------------------------------------------------------------------------------
# ****************************** MAIN THREAD ***********************************
#-------------------------------------------------------------------------------
OPTSTRING="hl:n:rsvta:j:J:p:"
# check arguments
while getopts "${OPTSTRING}" opt ; do
case "${opt}" in
a) ANSWERFILE=${OPTARG}
if [ ! -r ${ANSWERFILE} ] ; then
${ECHO} "Error: Answer file ${ANSWERFILE} does not exist or is not readable."
exit 1
fi
;;
r) INSTALL_PROPS=install_regonly.properties
;;
l) LOGDIR=${OPTARG}
if [ ! -d ${LOGDIR} -o ! -w ${LOGDIR} ] ; then
${ECHO} "${LOGDIR} is not a directory or is not writable"
exit 1
fi
;;
s) SILENT=true
;;
v) LOGLEVEL=FINEST
;;
t) INSTALLPROPS="${INSTALLPROPS} -p Display-Mode=CUI"
;;
n) DRYRUN=${OPTARG}
;;
j) _CMDLINEJAVA_HOME=${OPTARG}
if [ ! -d ${_CMDLINEJAVA_HOME} -o ! -r ${_CMDLINEJAVA_HOME} ] ; then
${ECHO} "${_CMDLINEJAVA_HOME} must be the root directory of a valid JVM installation"
exit 1
fi
;;
J) JAVA_OPTIONS=${OPTARG}
;;
p) INSTALLPROPS="${INSTALLPROPS} -p ${OPTARG}"
;;
?|h) usage
;;
esac
done
#
# Solaris or linux case only.
# Check if user is root before continuing on.
#
install_mq=1
if [ "`uname -s`" = SunOS ] ; then
if [ `/usr/xpg4/bin/id -u` != 0 ]; then
echo "$0: You must be \"root\" to install Message Queue."
echo "Exiting."
exit 1
fi
if [ -x /bin/zonename ]; then
if [ "`/bin/zonename`" != "global" ] ; then
if [ ! -n "${SILENT}" ] ; then
echo "$0: You are attempting to install Message Queue into a"
echo " non-global zone. Installation of Message Queue is only"
echo " supported into whole root non-global zones (or global zones)."
echo " Please make sure that you are installing Message Queue"
echo " into a whole root non-global zone before continuing."
echo " Do you wish to continue? [y/n]: \c"
read ans
else
ans=y
fi;
echo " "
if [ "$ans" = "y" -o "$ans" = "Y" -o "$ans" = "yes" -o "$ans" = "Yes" -o "$ans" = "YES" ]; then
install_mq=1
break;
else
echo "Message Queue was not installed on your system."
install_mq=0
exit 1
fi;
fi
fi
ENGINE_DIR=${MYDIR}/opt/install
META_DATA_DIR=${MYDIR}/var/opt/install/contents/${PRODUCTNAME}
INIT_CONFIG_DIR=/usr/share/lib/imq/install
ST_REG_RELPATH=etc/imq/registry/servicetag.xml
else
if [ `/usr/bin/id -u` != 0 ]; then
echo "$0: You must be \"root\" to install Message Queue."
echo "Exiting."
exit 1
fi
ENGINE_DIR=${MYDIR}/opt/sun/install
META_DATA_DIR=${MYDIR}/var/opt/sun/install/contents/${PRODUCTNAME}
INIT_CONFIG_DIR=/opt/sun/mq/private/share/lib/install
ST_REG_RELPATH=etc/opt/sun/mq/registry/servicetag.xml
fi
trap 'exit' 1 2 13 15
# always use bundled JVM
# overwrite check if user specify javahome to use
if [ "$_CMDLINEJAVA_HOME" = "" ]; then
useBundledJvm
else
JAVA_HOME=${_CMDLINEJAVA_HOME}
${ECHO} "Using the user defined JAVA_HOME : ${JAVA_HOME}"
fi
perform
exit $instCode