javax.websocket.CloseReason Maven / Gradle / Ivy
/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright (c) 2012-2013 Oracle and/or its affiliates. All rights reserved.
*
* The contents of this file are subject to the terms of either the GNU
* General Public License Version 2 only ("GPL") or the Common Development
* and Distribution License("CDDL") (collectively, the "License"). You
* may not use this file except in compliance with the License. You can
* obtain a copy of the License at
* http://glassfish.java.net/public/CDDL+GPL_1_1.html
* or packager/legal/LICENSE.txt. See the License for the specific
* language governing permissions and limitations under the License.
*
* When distributing the software, include this License Header Notice in each
* file and include the License file at packager/legal/LICENSE.txt.
*
* GPL Classpath Exception:
* Oracle designates this particular file as subject to the "Classpath"
* exception as provided by Oracle in the GPL Version 2 section of the License
* file that accompanied this code.
*
* Modifications:
* If applicable, add the following below the License Header, with the fields
* enclosed by brackets [] replaced by your own identifying information:
* "Portions Copyright [year] [name of copyright owner]"
*
* Contributor(s):
* If you wish your version of this file to be governed by only the CDDL or
* only the GPL Version 2, indicate your decision by adding "[Contributor]
* elects to include this software in this distribution under the [CDDL or GPL
* Version 2] license." If you don't indicate a single choice of license, a
* recipient has the option to distribute your version of this file under
* either the CDDL, the GPL Version 2 or to extend the choice of license to
* its licensees as provided above. However, if you add GPL Version 2 code
* and therefore, elected the GPL Version 2 license, then the option applies
* only if the new code is made subject to such option by the copyright
* holder.
*/
package javax.websocket;
import java.io.UnsupportedEncodingException;
/**
* A class encapsulating the reason why a web socket has been closed, or why it is being asked to
* close. Note the acceptable uses of codes and reason phrase are defined in more detail by
* RFC 6455.
*
* @author dannycoward
*/
public class CloseReason {
private final CloseReason.CloseCode closeCode;
private final String reasonPhrase;
/**
* Creates a reason for closing a web socket connection with the given
* code and reason phrase.
*
* @param closeCode the close code, may not be {@code null}
* @param reasonPhrase the reason phrase, may be {@code null}.
*/
public CloseReason(CloseReason.CloseCode closeCode, String reasonPhrase) {
if (closeCode == null) {
throw new IllegalArgumentException("closeCode cannot be null");
}
try {
if (reasonPhrase != null && reasonPhrase.getBytes("UTF-8").length > 123) {
throw new IllegalArgumentException("Reason Phrase cannot exceed 123 UTF-8 encoded bytes: " + reasonPhrase);
}
} catch (UnsupportedEncodingException uee) {
throw new IllegalStateException(uee);
}
this.closeCode = closeCode;
this.reasonPhrase = "".equals(reasonPhrase) ? null : reasonPhrase;
}
/**
* The Close code associated with this CloseReason.
*
* @return the close code.
*/
public CloseReason.CloseCode getCloseCode() {
return this.closeCode;
}
/**
* The reason phrase associated with this CloseReason.
*
* @return the reason phrase. If there is no reason phrase, this returns
* the empty string
*/
public String getReasonPhrase() {
return (this.reasonPhrase == null) ? "" : this.reasonPhrase;
}
/**
* Converts the CloseReason to a debug-friendly string. The exact format
* is not defined by the specification and may change in future releases.
*
* @return A String representation of this CloseReason
*/
public String toString() {
return (this.reasonPhrase == null) ?
"CloseReason[" + this.closeCode.getCode() + "]" :
"CloseReason[" + this.closeCode.getCode() + "," + reasonPhrase + "]";
}
/**
* A marker interface for the close codes. This interface may be
* implemented by enumerations that contain web socket close codes, for
* example enumerations that contain all the in use close codes as of
* web socket 1.0, or an enumeration that contains close codes
* that are currently reserved for special use by the web socket
* specification.
*/
public interface CloseCode {
/**
* Returns the code number, for example the integer '1000' for normal closure.
*
* @return the code number
*/
int getCode();
}
/**
* An Enumeration of status codes for a web socket close that
* are defined in the specification.
*/
public enum CloseCodes implements CloseReason.CloseCode {
/**
* 1000 indicates a normal closure, meaning that the purpose for
* which the connection was established has been fulfilled.
*/
NORMAL_CLOSURE(1000),
/**
* 1001 indicates that an endpoint is "going away", such as a server
* going down or a browser having navigated away from a page.
*/
GOING_AWAY(1001),
/**
* 1002 indicates that an endpoint is terminating the connection due
* to a protocol error.
*/
PROTOCOL_ERROR(1002),
/**
* 1003 indicates that an endpoint is terminating the connection
* because it has received a type of data it cannot accept (e.g., an
* endpoint that understands only text data MAY send this if it
* receives a binary message).
*/
CANNOT_ACCEPT(1003),
/**
* Reserved. The specific meaning might be defined in the future.
*/
RESERVED(1004),
/**
* 1005 is a reserved value and MUST NOT be set as a status code in a
* Close control frame by an endpoint. It is designated for use in
* applications expecting a status code to indicate that no status
* code was actually present.
*/
NO_STATUS_CODE(1005),
/**
* 1006 is a reserved value and MUST NOT be set as a status code in a
* Close control frame by an endpoint. It is designated for use in
* applications expecting a status code to indicate that the
* connection was closed abnormally, e.g., without sending or
* receiving a Close control frame.
*/
CLOSED_ABNORMALLY(1006),
/**
* 1007 indicates that an endpoint is terminating the connection
* because it has received data within a message that was not
* consistent with the type of the message (e.g., non-UTF-8
* data within a text message).
*/
NOT_CONSISTENT(1007),
/**
* 1008 indicates that an endpoint is terminating the connection
* because it has received a message that violates its policy. This
* is a generic status code that can be returned when there is no
* other more suitable status code (e.g., 1003 or 1009) or if there
* is a need to hide specific details about the policy.
*/
VIOLATED_POLICY(1008),
/**
* 1009 indicates that an endpoint is terminating the connection
* because it has received a message that is too big for it to
* process.
*/
TOO_BIG(1009),
/**
* 1010 indicates that an endpoint (client) is terminating the
* connection because it has expected the server to negotiate one or
* more extension, but the server didn't return them in the response
* message of the WebSocket handshake. The list of extensions that
* are needed SHOULD appear in the /reason/ part of the Close frame.
* Note that this status code is not used by the server, because it
* can fail the WebSocket handshake instead.
*/
NO_EXTENSION(1010),
/**
* 1011 indicates that a server is terminating the connection because
* it encountered an unexpected condition that prevented it from
* fulfilling the request.
*/
UNEXPECTED_CONDITION(1011),
/**
* 1012 indicates that the service will be restarted.
*/
SERVICE_RESTART(1012),
/**
* 1013 indicates that the service is experiencing overload
*/
TRY_AGAIN_LATER(1013),
/**
* 1015 is a reserved value and MUST NOT be set as a status code in a
* Close control frame by an endpoint. It is designated for use in
* applications expecting a status code to indicate that the
* connection was closed due to a failure to perform a TLS handshake
* (e.g., the server certificate can't be verified).
*/
TLS_HANDSHAKE_FAILURE(1015);
/**
* Creates a CloseCode from the given int code number. This method throws
* an IllegalArgumentException if the int is not one of the
*
* @param code the integer code number
* @return a new CloseCode with the given code number
* @throws IllegalArgumentException if the code is not a valid close code
*/
public static CloseReason.CloseCode getCloseCode(final int code) {
if (code < 1000 || code > 4999) {
throw new IllegalArgumentException("Invalid code: " + code);
}
switch (code) {
case 1000:
return CloseReason.CloseCodes.NORMAL_CLOSURE;
case 1001:
return CloseReason.CloseCodes.GOING_AWAY;
case 1002:
return CloseReason.CloseCodes.PROTOCOL_ERROR;
case 1003:
return CloseReason.CloseCodes.CANNOT_ACCEPT;
case 1004:
return CloseReason.CloseCodes.RESERVED;
case 1005:
return CloseReason.CloseCodes.NO_STATUS_CODE;
case 1006:
return CloseReason.CloseCodes.CLOSED_ABNORMALLY;
case 1007:
return CloseReason.CloseCodes.NOT_CONSISTENT;
case 1008:
return CloseReason.CloseCodes.VIOLATED_POLICY;
case 1009:
return CloseReason.CloseCodes.TOO_BIG;
case 1010:
return CloseReason.CloseCodes.NO_EXTENSION;
case 1011:
return CloseReason.CloseCodes.UNEXPECTED_CONDITION;
case 1012:
return CloseReason.CloseCodes.SERVICE_RESTART;
case 1013:
return CloseReason.CloseCodes.TRY_AGAIN_LATER;
case 1015:
return CloseReason.CloseCodes.TLS_HANDSHAKE_FAILURE;
}
return new CloseReason.CloseCode() {
@Override
public int getCode() {
return code;
}
};
}
CloseCodes(int code) {
this.code = code;
}
/**
* Return the code number of this status code.
*
* @return the code.
*/
@Override
public int getCode() {
return code;
}
private int code;
}
}
© 2015 - 2024 Weber Informatics LLC | Privacy Policy