All Downloads are FREE. Search and download functionalities are using the official Maven repository.

javax.websocket.CloseReason Maven / Gradle / Ivy

There is a newer version: 2.2.0
Show newest version
/*
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
 *
 * Copyright (c) 2012-2013 Oracle and/or its affiliates. All rights reserved.
 *
 * The contents of this file are subject to the terms of either the GNU
 * General Public License Version 2 only ("GPL") or the Common Development
 * and Distribution License("CDDL") (collectively, the "License").  You
 * may not use this file except in compliance with the License.  You can
 * obtain a copy of the License at
 * http://glassfish.java.net/public/CDDL+GPL_1_1.html
 * or packager/legal/LICENSE.txt.  See the License for the specific
 * language governing permissions and limitations under the License.
 *
 * When distributing the software, include this License Header Notice in each
 * file and include the License file at packager/legal/LICENSE.txt.
 *
 * GPL Classpath Exception:
 * Oracle designates this particular file as subject to the "Classpath"
 * exception as provided by Oracle in the GPL Version 2 section of the License
 * file that accompanied this code.
 *
 * Modifications:
 * If applicable, add the following below the License Header, with the fields
 * enclosed by brackets [] replaced by your own identifying information:
 * "Portions Copyright [year] [name of copyright owner]"
 *
 * Contributor(s):
 * If you wish your version of this file to be governed by only the CDDL or
 * only the GPL Version 2, indicate your decision by adding "[Contributor]
 * elects to include this software in this distribution under the [CDDL or GPL
 * Version 2] license."  If you don't indicate a single choice of license, a
 * recipient has the option to distribute your version of this file under
 * either the CDDL, the GPL Version 2 or to extend the choice of license to
 * its licensees as provided above.  However, if you add GPL Version 2 code
 * and therefore, elected the GPL Version 2 license, then the option applies
 * only if the new code is made subject to such option by the copyright
 * holder.
 */
package javax.websocket;

import java.io.UnsupportedEncodingException;

/**
 * A class encapsulating the reason why a web socket has been closed, or why it is being asked to
 * close. Note the acceptable uses of codes and reason phrase are defined in more detail by 
 * RFC 6455.
 *
 * @author dannycoward
 */
public class CloseReason {

    private final CloseReason.CloseCode closeCode;
    private final String reasonPhrase;

    /**
     * Creates a reason for closing a web socket connection with the given
     * code and reason phrase.
     *
     * @param closeCode    the close code, may not be {@code null}
     * @param reasonPhrase the reason phrase, may be {@code null}. 
     */
    public CloseReason(CloseReason.CloseCode closeCode, String reasonPhrase) {
        if (closeCode == null) {
            throw new IllegalArgumentException("closeCode cannot be null");
        } 
        
        try {
            if (reasonPhrase != null && reasonPhrase.getBytes("UTF-8").length > 123) {
                throw new IllegalArgumentException("Reason Phrase cannot exceed 123 UTF-8 encoded bytes: " + reasonPhrase);
            }
        } catch (UnsupportedEncodingException uee) {
            throw new IllegalStateException(uee);
        }
        this.closeCode = closeCode;
        this.reasonPhrase = "".equals(reasonPhrase) ? null : reasonPhrase;
    }

    /**
     * The Close code associated with this CloseReason.
     *
     * @return the close code.
     */
    public CloseReason.CloseCode getCloseCode() {
        return this.closeCode;
    }

    /**
     * The reason phrase associated with this CloseReason.
     *
     * @return the reason phrase. If there is no reason phrase, this returns
     * the empty string
     */
    public String getReasonPhrase() {
        return (this.reasonPhrase == null) ? "" : this.reasonPhrase;
    }

    /**
     * Converts the CloseReason to a debug-friendly string. The exact format
     * is not defined by the specification and may change in future releases.
     *
     * @return A String representation of this CloseReason
     */
    public String toString() {
        return (this.reasonPhrase == null) ?
             "CloseReason[" + this.closeCode.getCode() + "]" :
             "CloseReason[" + this.closeCode.getCode() + "," + reasonPhrase + "]";
    }


    /**
     * A marker interface for the close codes. This interface may be
     * implemented by enumerations that contain web socket close codes, for
     * example enumerations that contain all the in use close codes as of
     * web socket 1.0, or an enumeration that contains close codes
     * that are currently reserved for special use by the web socket
     * specification.
     */
    public interface CloseCode {
        /**
         * Returns the code number, for example the integer '1000' for normal closure.
         *
         * @return the code number
         */
        int getCode();
    }

    /**
     * An Enumeration of status codes for a web socket close that
     * are defined in the specification.
     */
    public enum CloseCodes implements CloseReason.CloseCode {


        /**
         * 1000 indicates a normal closure, meaning that the purpose for
         * which the connection was established has been fulfilled.
         */
        NORMAL_CLOSURE(1000),
        /**
         * 1001 indicates that an endpoint is "going away", such as a server
         * going down or a browser having navigated away from a page.
         */
        GOING_AWAY(1001),
        /**
         * 1002 indicates that an endpoint is terminating the connection due
         * to a protocol error.
         */
        PROTOCOL_ERROR(1002),
        /**
         * 1003 indicates that an endpoint is terminating the connection
         * because it has received a type of data it cannot accept (e.g., an
         * endpoint that understands only text data MAY send this if it
         * receives a binary message).
         */
        CANNOT_ACCEPT(1003),
        /**
         * Reserved.  The specific meaning might be defined in the future.
         */
        RESERVED(1004),
        /**
         * 1005 is a reserved value and MUST NOT be set as a status code in a
         * Close control frame by an endpoint.  It is designated for use in
         * applications expecting a status code to indicate that no status
         * code was actually present.
         */
        NO_STATUS_CODE(1005),
        /**
         * 1006 is a reserved value and MUST NOT be set as a status code in a
         * Close control frame by an endpoint.  It is designated for use in
         * applications expecting a status code to indicate that the
         * connection was closed abnormally, e.g., without sending or
         * receiving a Close control frame.
         */
        CLOSED_ABNORMALLY(1006),
        /**
         * 1007 indicates that an endpoint is terminating the connection
         * because it has received data within a message that was not
         * consistent with the type of the message (e.g., non-UTF-8
         * data within a text message).
         */
        NOT_CONSISTENT(1007),
        /**
         * 1008 indicates that an endpoint is terminating the connection
         * because it has received a message that violates its policy.  This
         * is a generic status code that can be returned when there is no
         * other more suitable status code (e.g., 1003 or 1009) or if there
         * is a need to hide specific details about the policy.
         */
        VIOLATED_POLICY(1008),
        /**
         * 1009 indicates that an endpoint is terminating the connection
         * because it has received a message that is too big for it to
         * process.
         */
        TOO_BIG(1009),
        /**
         * 1010 indicates that an endpoint (client) is terminating the
         * connection because it has expected the server to negotiate one or
         * more extension, but the server didn't return them in the response
         * message of the WebSocket handshake.  The list of extensions that
         * are needed SHOULD appear in the /reason/ part of the Close frame.
         * Note that this status code is not used by the server, because it
         * can fail the WebSocket handshake instead.
         */
        NO_EXTENSION(1010),
        /**
         * 1011 indicates that a server is terminating the connection because
         * it encountered an unexpected condition that prevented it from
         * fulfilling the request.
         */
        UNEXPECTED_CONDITION(1011),
        /**
         * 1012 indicates that the service will be restarted.
         */
        SERVICE_RESTART(1012),
        /**
         * 1013 indicates that the service is experiencing overload
         */
        TRY_AGAIN_LATER(1013),
        /**
         * 1015 is a reserved value and MUST NOT be set as a status code in a
         * Close control frame by an endpoint.  It is designated for use in
         * applications expecting a status code to indicate that the
         * connection was closed due to a failure to perform a TLS handshake
         * (e.g., the server certificate can't be verified).
         */
        TLS_HANDSHAKE_FAILURE(1015);

        /**
         * Creates a CloseCode from the given int code number. This method throws
         * an IllegalArgumentException if the int is not one of the
         *
         * @param code the integer code number
         * @return a new CloseCode with the given code number
         * @throws IllegalArgumentException if the code is not a valid close code
         */
        public static CloseReason.CloseCode getCloseCode(final int code) {
            if (code < 1000 || code > 4999) {
                throw new IllegalArgumentException("Invalid code: " + code);
            }
            switch (code) {
                case 1000:
                    return CloseReason.CloseCodes.NORMAL_CLOSURE;
                case 1001:
                    return CloseReason.CloseCodes.GOING_AWAY;
                case 1002:
                    return CloseReason.CloseCodes.PROTOCOL_ERROR;
                case 1003:
                    return CloseReason.CloseCodes.CANNOT_ACCEPT;
                case 1004:
                    return CloseReason.CloseCodes.RESERVED;
                case 1005:
                    return CloseReason.CloseCodes.NO_STATUS_CODE;
                case 1006:
                    return CloseReason.CloseCodes.CLOSED_ABNORMALLY;
                case 1007:
                    return CloseReason.CloseCodes.NOT_CONSISTENT;
                case 1008:
                    return CloseReason.CloseCodes.VIOLATED_POLICY;
                case 1009:
                    return CloseReason.CloseCodes.TOO_BIG;
                case 1010:
                    return CloseReason.CloseCodes.NO_EXTENSION;
                case 1011:
                    return CloseReason.CloseCodes.UNEXPECTED_CONDITION;
                case 1012:
                    return CloseReason.CloseCodes.SERVICE_RESTART;
                case 1013:
                    return CloseReason.CloseCodes.TRY_AGAIN_LATER;
                case 1015:
                    return CloseReason.CloseCodes.TLS_HANDSHAKE_FAILURE;
            }
            return new CloseReason.CloseCode() {
                @Override
                public int getCode() {
                    return code;
                }
            };

        }

        CloseCodes(int code) {
            this.code = code;
        }

        /**
         * Return the code number of this status code.
         *
         * @return the code.
         */
        @Override
        public int getCode() {
            return code;
        }

        private int code;
    }
}





© 2015 - 2024 Weber Informatics LLC | Privacy Policy