org.apache.jasper.compiler.SmapStratum Maven / Gradle / Ivy
/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright (c) 1997-2010 Oracle and/or its affiliates. All rights reserved.
*
* The contents of this file are subject to the terms of either the GNU
* General Public License Version 2 only ("GPL") or the Common Development
* and Distribution License("CDDL") (collectively, the "License"). You
* may not use this file except in compliance with the License. You can
* obtain a copy of the License at
* https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
* or packager/legal/LICENSE.txt. See the License for the specific
* language governing permissions and limitations under the License.
*
* When distributing the software, include this License Header Notice in each
* file and include the License file at packager/legal/LICENSE.txt.
*
* GPL Classpath Exception:
* Oracle designates this particular file as subject to the "Classpath"
* exception as provided by Oracle in the GPL Version 2 section of the License
* file that accompanied this code.
*
* Modifications:
* If applicable, add the following below the License Header, with the fields
* enclosed by brackets [] replaced by your own identifying information:
* "Portions Copyright [year] [name of copyright owner]"
*
* Contributor(s):
* If you wish your version of this file to be governed by only the CDDL or
* only the GPL Version 2, indicate your decision by adding "[Contributor]
* elects to include this software in this distribution under the [CDDL or GPL
* Version 2] license." If you don't indicate a single choice of license, a
* recipient has the option to distribute your version of this file under
* either the CDDL, the GPL Version 2 or to extend the choice of license to
* its licensees as provided above. However, if you add GPL Version 2 code
* and therefore, elected the GPL Version 2 license, then the option applies
* only if the new code is made subject to such option by the copyright
* holder.
*
*
* This file incorporates work covered by the following copyright and
* permission notice:
*
* Copyright 2004 The Apache Software Foundation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.jasper.compiler;
import java.util.List;
import java.util.ArrayList;
/**
* Represents the line and file mappings associated with a JSR-045
* "stratum".
*
* @author Jayson Falkner
* @author Shawn Bayern
*/
public class SmapStratum {
//*********************************************************************
// Class for storing LineInfo data
/**
* Represents a single LineSection in an SMAP, associated with
* a particular stratum.
*/
public static class LineInfo {
private int inputStartLine = -1;
private int outputStartLine = -1;
private int lineFileID = 0;
private int inputLineCount = 1;
private int outputLineIncrement = 1;
private boolean lineFileIDSet = false;
/** Sets InputStartLine. */
public void setInputStartLine(int inputStartLine) {
if (inputStartLine < 0)
throw new IllegalArgumentException("" + inputStartLine);
this.inputStartLine = inputStartLine;
}
/** Sets OutputStartLine. */
public void setOutputStartLine(int outputStartLine) {
if (outputStartLine < 0)
throw new IllegalArgumentException("" + outputStartLine);
this.outputStartLine = outputStartLine;
}
/**
* Sets lineFileID. Should be called only when different from
* that of prior LineInfo object (in any given context) or 0
* if the current LineInfo has no (logical) predecessor.
* LineInfo will print this file number no matter what.
*/
public void setLineFileID(int lineFileID) {
if (lineFileID < 0)
throw new IllegalArgumentException("" + lineFileID);
this.lineFileID = lineFileID;
this.lineFileIDSet = true;
}
/** Sets InputLineCount. */
public void setInputLineCount(int inputLineCount) {
if (inputLineCount < 0)
throw new IllegalArgumentException("" + inputLineCount);
this.inputLineCount = inputLineCount;
}
/** Sets OutputLineIncrement. */
public void setOutputLineIncrement(int outputLineIncrement) {
if (outputLineIncrement < 0)
throw new IllegalArgumentException("" + outputLineIncrement);
this.outputLineIncrement = outputLineIncrement;
}
/**
* Retrieves the current LineInfo as a String, print all values
* only when appropriate (but LineInfoID if and only if it's been
* specified, as its necessity is sensitive to context).
*/
public String getString() {
if (inputStartLine == -1 || outputStartLine == -1)
throw new IllegalStateException();
StringBuilder out = new StringBuilder();
out.append(inputStartLine);
if (lineFileIDSet)
out.append("#" + lineFileID);
if (inputLineCount != 1)
out.append("," + inputLineCount);
out.append(":" + outputStartLine);
if (outputLineIncrement != 1)
out.append("," + outputLineIncrement);
out.append('\n');
return out.toString();
}
public String toString() {
return getString();
}
}
//*********************************************************************
// Private state
private String stratumName;
private List fileNameList;
private List filePathList;
private List lineData;
private int lastFileID;
//*********************************************************************
// Constructor
/**
* Constructs a new SmapStratum object for the given stratum name
* (e.g., JSP).
*
* @param stratumName the name of the stratum (e.g., JSP)
*/
public SmapStratum(String stratumName) {
this.stratumName = stratumName;
fileNameList = new ArrayList();
filePathList = new ArrayList();
lineData = new ArrayList();
lastFileID = 0;
}
//*********************************************************************
// Methods to add mapping information
/**
* Adds record of a new file, by filename.
*
* @param filename the filename to add, unqualified by path.
*/
public void addFile(String filename) {
addFile(filename, filename);
}
/**
* Adds record of a new file, by filename and path. The path
* may be relative to a source compilation path.
*
* @param filename the filename to add, unqualified by path
* @param filePath the path for the filename, potentially relative
* to a source compilation path
*/
public void addFile(String filename, String filePath) {
int pathIndex = filePathList.indexOf(filePath);
if (pathIndex == -1) {
fileNameList.add(filename);
filePathList.add(filePath);
}
}
/**
* Combines consecutive LineInfos wherever possible
*/
public void optimizeLineSection() {
/* Some debugging code
for (int i = 0; i < lineData.size(); i++) {
LineInfo li = lineData.get(i);
System.out.print(li.toString());
}
*/
//Incorporate each LineInfo into the previous LineInfo's
//outputLineIncrement, if possible
int i = 0;
while (i < lineData.size() - 1) {
LineInfo li = lineData.get(i);
LineInfo liNext = lineData.get(i + 1);
if (!liNext.lineFileIDSet
&& liNext.inputStartLine == li.inputStartLine
&& liNext.inputLineCount == 1
&& li.inputLineCount == 1
&& liNext.outputStartLine
== li.outputStartLine
+ li.inputLineCount * li.outputLineIncrement) {
li.setOutputLineIncrement(
liNext.outputStartLine
- li.outputStartLine
+ liNext.outputLineIncrement);
lineData.remove(i + 1);
} else {
i++;
}
}
//Incorporate each LineInfo into the previous LineInfo's
//inputLineCount, if possible
i = 0;
while (i < lineData.size() - 1) {
LineInfo li = lineData.get(i);
LineInfo liNext = lineData.get(i + 1);
if (!liNext.lineFileIDSet
&& liNext.inputStartLine == li.inputStartLine + li.inputLineCount
&& liNext.outputLineIncrement == li.outputLineIncrement
&& liNext.outputStartLine
== li.outputStartLine
+ li.inputLineCount * li.outputLineIncrement) {
li.setInputLineCount(li.inputLineCount + liNext.inputLineCount);
lineData.remove(i + 1);
} else {
i++;
}
}
}
/**
* Adds complete information about a simple line mapping. Specify
* all the fields in this method; the back-end machinery takes care
* of printing only those that are necessary in the final SMAP.
* (My view is that fields are optional primarily for spatial efficiency,
* not for programmer convenience. Could always add utility methods
* later.)
*
* @param inputStartLine starting line in the source file
* (SMAP InputStartLine)
* @param inputFileName the filepath (or name) from which the input comes
* (yields SMAP LineFileID) Use unqualified names
* carefully, and only when they uniquely identify a file.
* @param inputLineCount the number of lines in the input to map
* (SMAP LineFileCount)
* @param outputStartLine starting line in the output file
* (SMAP OutputStartLine)
* @param outputLineIncrement number of output lines to map to each
* input line (SMAP OutputLineIncrement). Given the
* fact that the name starts with "output", I continuously have
* the subconscious urge to call this field
* OutputLineExcrement.
*/
public void addLineData(
int inputStartLine,
String inputFileName,
int inputLineCount,
int outputStartLine,
int outputLineIncrement) {
// check the input - what are you doing here??
int fileIndex = filePathList.indexOf(inputFileName);
if (fileIndex == -1) // still
throw new IllegalArgumentException(
"inputFileName: " + inputFileName);
//Jasper incorrectly SMAPs certain Nodes, giving them an
//outputStartLine of 0. This can cause a fatal error in
//optimizeLineSection, making it impossible for Jasper to
//compile the JSP. Until we can fix the underlying
//SMAPping problem, we simply ignore the flawed SMAP entries.
if (outputStartLine == 0)
return;
// build the LineInfo
LineInfo li = new LineInfo();
li.setInputStartLine(inputStartLine);
li.setInputLineCount(inputLineCount);
li.setOutputStartLine(outputStartLine);
li.setOutputLineIncrement(outputLineIncrement);
if (fileIndex != lastFileID)
li.setLineFileID(fileIndex);
lastFileID = fileIndex;
// save it
lineData.add(li);
}
//*********************************************************************
// Methods to retrieve information
/**
* Returns the name of the stratum.
*/
public String getStratumName() {
return stratumName;
}
/**
* Returns the given stratum as a String: a StratumSection,
* followed by at least one FileSection and at least one LineSection.
*/
public String getString() {
// check state and initialize buffer
if (fileNameList.size() == 0 || lineData.size() == 0)
return null;
StringBuilder out = new StringBuilder();
// print StratumSection
out.append("*S " + stratumName + "\n");
// print FileSection
out.append("*F\n");
int bound = fileNameList.size();
for (int i = 0; i < bound; i++) {
if (filePathList.get(i) != null) {
out.append("+ " + i + " " + fileNameList.get(i) + "\n");
// Source paths must be relative, not absolute, so we
// remove the leading "/", if one exists.
String filePath = filePathList.get(i);
if (filePath.startsWith("/")) {
filePath = filePath.substring(1);
}
out.append(filePath + "\n");
} else {
out.append(i + " " + fileNameList.get(i) + "\n");
}
}
// print LineSection
out.append("*L\n");
bound = lineData.size();
for (int i = 0; i < bound; i++) {
LineInfo li = lineData.get(i);
out.append(li.getString());
}
return out.toString();
}
public String toString() {
return getString();
}
}
© 2015 - 2024 Weber Informatics LLC | Privacy Policy