org.jivesoftware.smackx.commands.AdHocCommand Maven / Gradle / Ivy
/**
*
* Copyright 2005-2007 Jive Software.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.jivesoftware.smackx.commands;
import java.util.List;
import org.jivesoftware.smack.SmackException.NoResponseException;
import org.jivesoftware.smack.SmackException.NotConnectedException;
import org.jivesoftware.smack.XMPPException.XMPPErrorException;
import org.jivesoftware.smack.packet.StanzaError;
import org.jivesoftware.smackx.commands.packet.AdHocCommandData;
import org.jivesoftware.smackx.xdata.Form;
import org.jxmpp.jid.Jid;
/**
* An ad-hoc command is responsible for executing the provided service and
* storing the result of the execution. Each new request will create a new
* instance of the command, allowing information related to executions to be
* stored in it. For example suppose that a command that retrieves the list of
* users on a server is implemented. When the command is executed it gets that
* list and the result is stored as a form in the command instance, i.e. the
* getForm method retrieves a form with all the users.
*
* Each command has a node that should be unique within a given JID.
*
*
* Commands may have zero or more stages. Each stage is usually used for
* gathering information required for the command execution. Users are able to
* move forward or backward across the different stages. Commands may not be
* cancelled while they are being executed. However, users may request the
* "cancel" action when submitting a stage response indicating that the command
* execution should be aborted. Thus, releasing any collected information.
* Commands that require user interaction (i.e. have more than one stage) will
* have to provide the data forms the user must complete in each stage and the
* allowed actions the user might perform during each stage (e.g. go to the
* previous stage or go to the next stage).
*
* All the actions may throw an XMPPException if there is a problem executing
* them. The XMPPError of that exception may have some specific
* information about the problem. The possible extensions are:
*
* - malformed-action. Extension of a bad-request error.
* - bad-action. Extension of a bad-request error.
* - bad-locale. Extension of a bad-request error.
* - bad-payload. Extension of a bad-request error.
* - bad-sessionid. Extension of a bad-request error.
* - session-expired. Extension of a not-allowed error.
*
*
* See the SpecificErrorCondition class for detailed description
* of each one.
*
* Use the getSpecificErrorConditionFrom to obtain the specific
* information from an XMPPError.
*
* @author Gabriel Guardincerri
*
*/
public abstract class AdHocCommand {
// TODO: Analyze the redesign of command by having an ExecutionResponse as a
// TODO: result to the execution of every action. That result should have all the
// TODO: information related to the execution, e.g. the form to fill. Maybe this
// TODO: design is more intuitive and simpler than the current one that has all in
// TODO: one class.
private AdHocCommandData data;
public AdHocCommand() {
super();
data = new AdHocCommandData();
}
/**
* Returns the specific condition of the error or null if the
* error doesn't have any.
*
* @param error the error the get the specific condition from.
* @return the specific condition of this error, or null if it doesn't have
* any.
*/
public static SpecificErrorCondition getSpecificErrorCondition(StanzaError error) {
// This method is implemented to provide an easy way of getting a packet
// extension of the XMPPError.
for (SpecificErrorCondition condition : SpecificErrorCondition.values()) {
if (error.getExtension(condition.toString(),
AdHocCommandData.SpecificError.namespace) != null) {
return condition;
}
}
return null;
}
/**
* Set the the human readable name of the command, usually used for
* displaying in a UI.
*
* @param name the name.
*/
public void setName(String name) {
data.setName(name);
}
/**
* Returns the human readable name of the command.
*
* @return the human readable name of the command
*/
public String getName() {
return data.getName();
}
/**
* Sets the unique identifier of the command. This value must be unique for
* the OwnerJID.
*
* @param node the unique identifier of the command.
*/
public void setNode(String node) {
data.setNode(node);
}
/**
* Returns the unique identifier of the command. It is unique for the
* OwnerJID.
*
* @return the unique identifier of the command.
*/
public String getNode() {
return data.getNode();
}
/**
* Returns the full JID of the owner of this command. This JID is the "to" of a
* execution request.
*
* @return the owner JID.
*/
public abstract Jid getOwnerJID();
/**
* Returns the notes that the command has at the current stage.
*
* @return a list of notes.
*/
public List getNotes() {
return data.getNotes();
}
/**
* Adds a note to the current stage. This should be used when setting a
* response to the execution of an action. All the notes added here are
* returned by the {@link #getNotes} method during the current stage.
* Once the stage changes all the notes are discarded.
*
* @param note the note.
*/
protected void addNote(AdHocCommandNote note) {
data.addNote(note);
}
public String getRaw() {
return data.getChildElementXML().toString();
}
/**
* Returns the form of the current stage. Usually it is the form that must
* be answered to execute the next action. If that is the case it should be
* used by the requester to fill all the information that the executor needs
* to continue to the next stage. It can also be the result of the
* execution.
*
* @return the form of the current stage to fill out or the result of the
* execution.
*/
public Form getForm() {
if (data.getForm() == null) {
return null;
}
else {
return new Form(data.getForm());
}
}
/**
* Sets the form of the current stage. This should be used when setting a
* response. It could be a form to fill out the information needed to go to
* the next stage or the result of an execution.
*
* @param form the form of the current stage to fill out or the result of the
* execution.
*/
protected void setForm(Form form) {
data.setForm(form.getDataFormToSend());
}
/**
* Executes the command. This is invoked only on the first stage of the
* command. It is invoked on every command. If there is a problem executing
* the command it throws an XMPPException.
*
* @throws NoResponseException
* @throws XMPPErrorException if there is an error executing the command.
* @throws NotConnectedException
* @throws InterruptedException
*/
public abstract void execute() throws NoResponseException, XMPPErrorException, NotConnectedException, InterruptedException;
/**
* Executes the next action of the command with the information provided in
* the response. This form must be the answer form of the
* previous stage. This method will be only invoked for commands that have one
* or more stages. If there is a problem executing the command it throws an
* XMPPException.
*
* @param response the form answer of the previous stage.
* @throws NoResponseException
* @throws XMPPErrorException if there is a problem executing the command.
* @throws NotConnectedException
* @throws InterruptedException
*/
public abstract void next(Form response) throws NoResponseException, XMPPErrorException, NotConnectedException, InterruptedException;
/**
* Completes the command execution with the information provided in the
* response. This form must be the answer form of the
* previous stage. This method will be only invoked for commands that have one
* or more stages. If there is a problem executing the command it throws an
* XMPPException.
*
* @param response the form answer of the previous stage.
*
* @throws NoResponseException
* @throws XMPPErrorException if there is a problem executing the command.
* @throws NotConnectedException
* @throws InterruptedException
*/
public abstract void complete(Form response) throws NoResponseException, XMPPErrorException, NotConnectedException, InterruptedException;
/**
* Goes to the previous stage. The requester is asking to re-send the
* information of the previous stage. The command must change it state to
* the previous one. If there is a problem executing the command it throws
* an XMPPException.
*
* @throws NoResponseException
* @throws XMPPErrorException if there is a problem executing the command.
* @throws NotConnectedException
* @throws InterruptedException
*/
public abstract void prev() throws NoResponseException, XMPPErrorException, NotConnectedException, InterruptedException;
/**
* Cancels the execution of the command. This can be invoked on any stage of
* the execution. If there is a problem executing the command it throws an
* XMPPException.
*
* @throws NoResponseException
* @throws XMPPErrorException if there is a problem executing the command.
* @throws NotConnectedException
* @throws InterruptedException
*/
public abstract void cancel() throws NoResponseException, XMPPErrorException, NotConnectedException, InterruptedException;
/**
* Returns a collection with the allowed actions based on the current stage.
* Possible actions are: {@link Action#prev prev}, {@link Action#next next} and
* {@link Action#complete complete}. This method will be only invoked for commands that
* have one or more stages.
*
* @return a collection with the allowed actions based on the current stage
* as defined in the SessionData.
*/
protected List getActions() {
return data.getActions();
}
/**
* Add an action to the current stage available actions. This should be used
* when creating a response.
*
* @param action the action.
*/
protected void addActionAvailable(Action action) {
data.addAction(action);
}
/**
* Returns the action available for the current stage which is
* considered the equivalent to "execute". When the requester sends his
* reply, if no action was defined in the command then the action will be
* assumed "execute" thus assuming the action returned by this method. This
* method will never be invoked for commands that have no stages.
*
* @return the action available for the current stage which is considered
* the equivalent to "execute".
*/
protected Action getExecuteAction() {
return data.getExecuteAction();
}
/**
* Sets which of the actions available for the current stage is
* considered the equivalent to "execute". This should be used when setting
* a response. When the requester sends his reply, if no action was defined
* in the command then the action will be assumed "execute" thus assuming
* the action returned by this method.
*
* @param action the action.
*/
protected void setExecuteAction(Action action) {
data.setExecuteAction(action);
}
/**
* Returns the status of the current stage.
*
* @return the current status.
*/
public Status getStatus() {
return data.getStatus();
}
/**
* Check if this command has been completed successfully.
*
* @return true if this command is completed.
* @since 4.2
*/
public boolean isCompleted() {
return getStatus() == Status.completed;
}
/**
* Sets the data of the current stage. This should not used.
*
* @param data the data.
*/
void setData(AdHocCommandData data) {
this.data = data;
}
/**
* Gets the data of the current stage. This should not used.
*
* @return the data.
*/
AdHocCommandData getData() {
return data;
}
/**
* Returns true if the action is available in the current stage.
* The {@link Action#cancel cancel} action is always allowed. To define the
* available actions use the addActionAvailable method.
*
* @param action
* The action to check if it is available.
* @return True if the action is available for the current stage.
*/
protected boolean isValidAction(Action action) {
return getActions().contains(action) || Action.cancel.equals(action);
}
/**
* The status of the stage in the adhoc command.
*/
public enum Status {
/**
* The command is being executed.
*/
executing,
/**
* The command has completed. The command session has ended.
*/
completed,
/**
* The command has been canceled. The command session has ended.
*/
canceled
}
public enum Action {
/**
* The command should be executed or continue to be executed. This is
* the default value.
*/
execute,
/**
* The command should be canceled.
*/
cancel,
/**
* The command should be digress to the previous stage of execution.
*/
prev,
/**
* The command should progress to the next stage of execution.
*/
next,
/**
* The command should be completed (if possible).
*/
complete,
/**
* The action is unknown. This is used when a received message has an
* unknown action. It must not be used to send an execution request.
*/
unknown
}
public enum SpecificErrorCondition {
/**
* The responding JID cannot accept the specified action.
*/
badAction("bad-action"),
/**
* The responding JID does not understand the specified action.
*/
malformedAction("malformed-action"),
/**
* The responding JID cannot accept the specified language/locale.
*/
badLocale("bad-locale"),
/**
* The responding JID cannot accept the specified payload (e.g. the data
* form did not provide one or more required fields).
*/
badPayload("bad-payload"),
/**
* The responding JID cannot accept the specified sessionid.
*/
badSessionid("bad-sessionid"),
/**
* The requesting JID specified a sessionid that is no longer active
* (either because it was completed, canceled, or timed out).
*/
sessionExpired("session-expired");
private final String value;
SpecificErrorCondition(String value) {
this.value = value;
}
@Override
public String toString() {
return value;
}
}
}