javassist.bytecode.CodeIterator Maven / Gradle / Ivy
/*
* Javassist, a Java-bytecode translator toolkit.
* Copyright (C) 1999-2007 Shigeru Chiba. All Rights Reserved.
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. Alternatively, the contents of this file may be used under
* the terms of the GNU Lesser General Public License Version 2.1 or later.
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*/
package javassist.bytecode;
import java.util.ArrayList;
/**
* An iterator for editing a code attribute.
*
* If there are multiple CodeIterators referring to the
* same Code_attribute, then inserting a gap by one
* CodeIterator will break the other
* CodeIterator.
*
*
This iterator does not provide remove().
* If a piece of code in a Code_attribute is unnecessary,
* it should be overwritten with NOP.
*
* @see CodeAttribute#iterator()
*/
public class CodeIterator implements Opcode {
protected CodeAttribute codeAttr;
protected byte[] bytecode;
protected int endPos;
protected int currentPos;
protected int mark;
protected CodeIterator(CodeAttribute ca) {
codeAttr = ca;
bytecode = ca.getCode();
begin();
}
/**
* Moves to the first instruction.
*/
public void begin() {
currentPos = mark = 0;
endPos = getCodeLength();
}
/**
* Moves to the given index.
*
*
The index of the next instruction is set to the given index.
* The successive call to next()
* returns the index that has been given to move().
*
*
Note that the index is into the byte array returned by
* get().getCode().
*
* @see CodeAttribute#getCode()
*/
public void move(int index) {
currentPos = index;
}
/**
* Sets a mark to the bytecode at the given index.
* The mark can be used to track the position of that bytecode
* when code blocks are inserted.
* If a code block is inclusively inserted at the position of the
* bytecode, the mark is set to the inserted code block.
*
* @see #getMark()
* @since 3.11
*/
public void setMark(int index) {
mark = index;
}
/**
* Gets the index of the position of the mark set by
* setMark.
*
* @return the index of the position.
* @see #setMark(int)
* @since 3.11
*/
public int getMark() { return mark; }
/**
* Returns a Code attribute read with this iterator.
*/
public CodeAttribute get() {
return codeAttr;
}
/**
* Returns code_length of Code_attribute.
*/
public int getCodeLength() {
return bytecode.length;
}
/**
* Returns the unsigned 8bit value at the given index.
*/
public int byteAt(int index) { return bytecode[index] & 0xff; }
/**
* Writes an 8bit value at the given index.
*/
public void writeByte(int value, int index) {
bytecode[index] = (byte)value;
}
/**
* Returns the unsigned 16bit value at the given index.
*/
public int u16bitAt(int index) {
return ByteArray.readU16bit(bytecode, index);
}
/**
* Returns the signed 16bit value at the given index.
*/
public int s16bitAt(int index) {
return ByteArray.readS16bit(bytecode, index);
}
/**
* Writes a 16 bit integer at the index.
*/
public void write16bit(int value, int index) {
ByteArray.write16bit(value, bytecode, index);
}
/**
* Returns the signed 32bit value at the given index.
*/
public int s32bitAt(int index) {
return ByteArray.read32bit(bytecode, index);
}
/**
* Writes a 32bit integer at the index.
*/
public void write32bit(int value, int index) {
ByteArray.write32bit(value, bytecode, index);
}
/**
* Writes a byte array at the index.
*
* @param code may be a zero-length array.
*/
public void write(byte[] code, int index) {
int len = code.length;
for (int j = 0; j < len; ++j)
bytecode[index++] = code[j];
}
/**
* Returns true if there is more instructions.
*/
public boolean hasNext() { return currentPos < endPos; }
/**
* Returns the index of the next instruction
* (not the operand following the current opcode).
*
*
Note that the index is into the byte array returned by
* get().getCode().
*
* @see CodeAttribute#getCode()
* @see CodeIterator#byteAt(int)
*/
public int next() throws BadBytecode {
int pos = currentPos;
currentPos = nextOpcode(bytecode, pos);
return pos;
}
/**
* Obtains the value that the next call
* to next() will return.
*
*
This method is side-effects free.
* Successive calls to lookAhead() return the
* same value until next() is called.
*/
public int lookAhead() {
return currentPos;
}
/**
* Moves to the instruction for
* either super() or this().
*
*
This method skips all the instructions for computing arguments
* to super() or this(), which should be
* placed at the beginning of a constructor body.
*
*
This method returns the index of INVOKESPECIAL instruction
* executing super() or this().
* A successive call to next() returns the
* index of the next instruction following that INVOKESPECIAL.
*
*
This method works only for a constructor.
*
* @return the index of the INVOKESPECIAL instruction, or -1
* if a constructor invocation is not found.
*/
public int skipConstructor() throws BadBytecode {
return skipSuperConstructor0(-1);
}
/**
* Moves to the instruction for super().
*
*
This method skips all the instructions for computing arguments to
* super(), which should be
* placed at the beginning of a constructor body.
*
*
This method returns the index of INVOKESPECIAL instruction
* executing super().
* A successive call to next() returns the
* index of the next instruction following that INVOKESPECIAL.
*
*
This method works only for a constructor.
*
* @return the index of the INVOKESPECIAL instruction, or -1
* if a super constructor invocation is not found
* but this() is found.
*/
public int skipSuperConstructor() throws BadBytecode {
return skipSuperConstructor0(0);
}
/**
* Moves to the instruction for this().
*
*
This method skips all the instructions for computing arguments to
* this(), which should be
* placed at the beginning of a constructor body.
*
*
This method returns the index of INVOKESPECIAL instruction
* executing this().
* A successive call to next() returns the
* index of the next instruction following that INVOKESPECIAL.
*
*
This method works only for a constructor.
*
* @return the index of the INVOKESPECIAL instruction, or -1
* if a explicit constructor invocation is not found
* but super() is found.
*/
public int skipThisConstructor() throws BadBytecode {
return skipSuperConstructor0(1);
}
/* skipSuper 1: this(), 0: super(), -1: both.
*/
private int skipSuperConstructor0(int skipThis) throws BadBytecode {
begin();
ConstPool cp = codeAttr.getConstPool();
String thisClassName = codeAttr.getDeclaringClass();
int nested = 0;
while (hasNext()) {
int index = next();
int c = byteAt(index);
if (c == NEW)
++nested;
else if (c == INVOKESPECIAL) {
int mref = ByteArray.readU16bit(bytecode, index + 1);
if (cp.getMethodrefName(mref).equals(MethodInfo.nameInit))
if (--nested < 0) {
if (skipThis < 0)
return index;
String cname = cp.getMethodrefClassName(mref);
if (cname.equals(thisClassName) == (skipThis > 0))
return index;
else
break;
}
}
}
begin();
return -1;
}
/**
* Inserts the given bytecode sequence
* before the next instruction that would be returned by
* next() (not before the instruction returned
* by the last call to next()).
* Branch offsets and the exception table are also updated.
*
*
If the next instruction is at the beginning of a block statement,
* then the bytecode is inserted within that block.
*
*
An extra gap may be inserted at the end of the inserted
* bytecode sequence for adjusting alignment if the code attribute
* includes LOOKUPSWITCH or TABLESWITCH.
*
* @param code inserted bytecode sequence.
* @return the index indicating the first byte of the
* inserted byte sequence.
*/
public int insert(byte[] code)
throws BadBytecode
{
return insert0(currentPos, code, false);
}
/**
* Inserts the given bytecode sequence
* before the instruction at the given index pos.
* Branch offsets and the exception table are also updated.
*
*
If the instruction at the given index is at the beginning
* of a block statement,
* then the bytecode is inserted within that block.
*
*
An extra gap may be inserted at the end of the inserted
* bytecode sequence for adjusting alignment if the code attribute
* includes LOOKUPSWITCH or TABLESWITCH.
*
*
The index at which the byte sequence is actually inserted
* might be different from pos since some other bytes might be
* inserted at other positions (e.g. to change GOTO
* to GOTO_W).
*
* @param pos the index at which a byte sequence is inserted.
* @param code inserted bytecode sequence.
*/
public void insert(int pos, byte[] code) throws BadBytecode {
insert0(pos, code, false);
}
/**
* Inserts the given bytecode sequence
* before the instruction at the given index pos.
* Branch offsets and the exception table are also updated.
*
*
If the instruction at the given index is at the beginning
* of a block statement,
* then the bytecode is inserted within that block.
*
*
An extra gap may be inserted at the end of the inserted
* bytecode sequence for adjusting alignment if the code attribute
* includes LOOKUPSWITCH or TABLESWITCH.
*
* @param pos the index at which a byte sequence is inserted.
* @param code inserted bytecode sequence.
* @return the index indicating the first byte of the
* inserted byte sequence, which might be
* different from pos.
* @since 3.11
*/
public int insertAt(int pos, byte[] code) throws BadBytecode {
return insert0(pos, code, false);
}
/**
* Inserts the given bytecode sequence exclusively
* before the next instruction that would be returned by
* next() (not before the instruction returned
* by tha last call to next()).
* Branch offsets and the exception table are also updated.
*
*
If the next instruction is at the beginning of a block statement,
* then the bytecode is excluded from that block.
*
*
An extra gap may be inserted at the end of the inserted
* bytecode sequence for adjusting alignment if the code attribute
* includes LOOKUPSWITCH or TABLESWITCH.
*
* @param code inserted bytecode sequence.
* @return the index indicating the first byte of the
* inserted byte sequence.
*/
public int insertEx(byte[] code)
throws BadBytecode
{
return insert0(currentPos, code, true);
}
/**
* Inserts the given bytecode sequence exclusively
* before the instruction at the given index pos.
* Branch offsets and the exception table are also updated.
*
*
If the instruction at the given index is at the beginning
* of a block statement,
* then the bytecode is excluded from that block.
*
*
An extra gap may be inserted at the end of the inserted
* bytecode sequence for adjusting alignment if the code attribute
* includes LOOKUPSWITCH or TABLESWITCH.
*
*
The index at which the byte sequence is actually inserted
* might be different from pos since some other bytes might be
* inserted at other positions (e.g. to change GOTO
* to GOTO_W).
*
* @param pos the index at which a byte sequence is inserted.
* @param code inserted bytecode sequence.
*/
public void insertEx(int pos, byte[] code) throws BadBytecode {
insert0(pos, code, true);
}
/**
* Inserts the given bytecode sequence exclusively
* before the instruction at the given index pos.
* Branch offsets and the exception table are also updated.
*
*
If the instruction at the given index is at the beginning
* of a block statement,
* then the bytecode is excluded from that block.
*
*
An extra gap may be inserted at the end of the inserted
* bytecode sequence for adjusting alignment if the code attribute
* includes LOOKUPSWITCH or TABLESWITCH.
*
* @param pos the index at which a byte sequence is inserted.
* @param code inserted bytecode sequence.
* @return the index indicating the first byte of the
* inserted byte sequence, which might be
* different from pos.
* @since 3.11
*/
public int insertExAt(int pos, byte[] code) throws BadBytecode {
return insert0(pos, code, true);
}
/**
* @return the index indicating the first byte of the
* inserted byte sequence.
*/
private int insert0(int pos, byte[] code, boolean exclusive)
throws BadBytecode
{
int len = code.length;
if (len <= 0)
return pos;
// currentPos will change.
pos = insertGapAt(pos, len, exclusive).position;
int p = pos;
for (int j = 0; j < len; ++j)
bytecode[p++] = code[j];
return pos;
}
/**
* Inserts a gap
* before the next instruction that would be returned by
* next() (not before the instruction returned
* by the last call to next()).
* Branch offsets and the exception table are also updated.
* The inserted gap is filled with NOP. The gap length may be
* extended to a multiple of 4.
*
*
If the next instruction is at the beginning of a block statement,
* then the gap is inserted within that block.
*
* @param length gap length
* @return the index indicating the first byte of the inserted gap.
*/
public int insertGap(int length) throws BadBytecode {
return insertGapAt(currentPos, length, false).position;
}
/**
* Inserts a gap in front of the instruction at the given
* index pos.
* Branch offsets and the exception table are also updated.
* The inserted gap is filled with NOP. The gap length may be
* extended to a multiple of 4.
*
*
If the instruction at the given index is at the beginning
* of a block statement,
* then the gap is inserted within that block.
*
* @param pos the index at which a gap is inserted.
* @param length gap length.
* @return the length of the inserted gap.
* It might be bigger than length.
*/
public int insertGap(int pos, int length) throws BadBytecode {
return insertGapAt(pos, length, false).length;
}
/**
* Inserts an exclusive gap
* before the next instruction that would be returned by
* next() (not before the instruction returned
* by the last call to next()).
* Branch offsets and the exception table are also updated.
* The inserted gap is filled with NOP. The gap length may be
* extended to a multiple of 4.
*
*
If the next instruction is at the beginning of a block statement,
* then the gap is excluded from that block.
*
* @param length gap length
* @return the index indicating the first byte of the inserted gap.
*/
public int insertExGap(int length) throws BadBytecode {
return insertGapAt(currentPos, length, true).position;
}
/**
* Inserts an exclusive gap in front of the instruction at the given
* index pos.
* Branch offsets and the exception table are also updated.
* The inserted gap is filled with NOP. The gap length may be
* extended to a multiple of 4.
*
*
If the instruction at the given index is at the beginning
* of a block statement,
* then the gap is excluded from that block.
*
* @param pos the index at which a gap is inserted.
* @param length gap length.
* @return the length of the inserted gap.
* It might be bigger than length.
*/
public int insertExGap(int pos, int length) throws BadBytecode {
return insertGapAt(pos, length, true).length;
}
/**
* An inserted gap.
*
* @since 3.11
*/
public static class Gap {
/**
* The position of the gap.
*/
public int position;
/**
* The length of the gap.
*/
public int length;
}
/**
* Inserts an inclusive or exclusive gap in front of the instruction
* at the given index pos.
* Branch offsets and the exception table in the method body
* are also updated. The inserted gap is filled with NOP.
* The gap length may be extended to a multiple of 4.
*
*
Suppose that the instruction at the given index is at the
* beginning of a block statement. If the gap is inclusive,
* then it is included within that block. If the gap is exclusive,
* then it is excluded from that block.
*
*
The index at which the gap is actually inserted
* might be different from pos since some other bytes might be
* inserted at other positions (e.g. to change GOTO
* to GOTO_W). The index is available from the Gap
* object returned by this method.
*
*
Suppose that the gap is inserted at the position of
* the next instruction that would be returned by
* next() (not the last instruction returned
* by the last call to next()). The next
* instruction returned by next() after the gap is
* inserted is still the same instruction. It is not NOP
* at the first byte of the inserted gap.
*
* @param pos the index at which a gap is inserted.
* @param length gap length.
* @param exclusive true if exclusive, otherwise false.
* @return the position and the length of the inserted gap.
* @since 3.11
*/
public Gap insertGapAt(int pos, int length, boolean exclusive)
throws BadBytecode
{
/**
* cursorPos indicates the next bytecode whichever exclusive is
* true or false.
*/
Gap gap = new Gap();
if (length <= 0) {
gap.position = pos;
gap.length = 0;
return gap;
}
byte[] c;
int length2;
if (bytecode.length + length > Short.MAX_VALUE) {
// currentPos might change after calling insertGapCore0w().
c = insertGapCore0w(bytecode, pos, length, exclusive,
get().getExceptionTable(), codeAttr, gap);
pos = gap.position;
length2 = length; // == gap.length
}
else {
int cur = currentPos;
c = insertGapCore0(bytecode, pos, length, exclusive,
get().getExceptionTable(), codeAttr);
// insertGapCore0() never changes pos.
length2 = c.length - bytecode.length;
gap.position = pos;
gap.length = length2;
if (cur >= pos)
currentPos = cur + length2;
if (mark > pos || (mark == pos && exclusive))
mark += length2;
}
codeAttr.setCode(c);
bytecode = c;
endPos = getCodeLength();
updateCursors(pos, length2);
return gap;
}
/**
* Is called when a gap is inserted. The default implementation is empty.
* A subclass can override this method so that cursors will be updated.
*
* @param pos the position where a gap is inserted.
* @param length the length of the gap.
*/
protected void updateCursors(int pos, int length) {
// empty
}
/**
* Copies and inserts the entries in the given exception table
* at the beginning of the exception table in the code attribute
* edited by this object.
*
* @param offset the value added to the code positions included
* in the entries.
*/
public void insert(ExceptionTable et, int offset) {
codeAttr.getExceptionTable().add(0, et, offset);
}
/**
* Appends the given bytecode sequence at the end.
*
* @param code the bytecode appended.
* @return the position of the first byte of the appended bytecode.
*/
public int append(byte[] code) {
int size = getCodeLength();
int len = code.length;
if (len <= 0)
return size;
appendGap(len);
byte[] dest = bytecode;
for (int i = 0; i < len; ++i)
dest[i + size] = code[i];
return size;
}
/**
* Appends a gap at the end of the bytecode sequence.
*
* @param gapLength gap length
*/
public void appendGap(int gapLength) {
byte[] code = bytecode;
int codeLength = code.length;
byte[] newcode = new byte[codeLength + gapLength];
int i;
for (i = 0; i < codeLength; ++i)
newcode[i] = code[i];
for (i = codeLength; i < codeLength + gapLength; ++i)
newcode[i] = NOP;
codeAttr.setCode(newcode);
bytecode = newcode;
endPos = getCodeLength();
}
/**
* Copies and appends the entries in the given exception table
* at the end of the exception table in the code attribute
* edited by this object.
*
* @param offset the value added to the code positions included
* in the entries.
*/
public void append(ExceptionTable et, int offset) {
ExceptionTable table = codeAttr.getExceptionTable();
table.add(table.size(), et, offset);
}
/* opcodeLegth is used for implementing nextOpcode().
*/
private static final int opcodeLength[] = {
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, 2, 3,
3, 2, 2, 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 3, 3, 3, 3, 3, 3, 3,
3, 3, 3, 3, 3, 3, 3, 3, 3, 2, 0, 0, 1, 1, 1, 1, 1, 1, 3, 3,
3, 3, 3, 3, 3, 5, 0, 3, 2, 3, 1, 1, 3, 3, 1, 1, 0, 4, 3, 3,
5, 5
};
// 0 .. UNUSED (186), LOOKUPSWITCH, TABLESWITCH, WIDE
/**
* Calculates the index of the next opcode.
*/
static int nextOpcode(byte[] code, int index)
throws BadBytecode
{
int opcode;
try {
opcode = code[index] & 0xff;
}
catch (IndexOutOfBoundsException e) {
throw new BadBytecode("invalid opcode address");
}
try {
int len = opcodeLength[opcode];
if (len > 0)
return index + len;
else if (opcode == WIDE)
if (code[index + 1] == (byte)IINC) // WIDE IINC
return index + 6;
else
return index + 4; // WIDE ...
else {
int index2 = (index & ~3) + 8;
if (opcode == LOOKUPSWITCH) {
int npairs = ByteArray.read32bit(code, index2);
return index2 + npairs * 8 + 4;
}
else if (opcode == TABLESWITCH) {
int low = ByteArray.read32bit(code, index2);
int high = ByteArray.read32bit(code, index2 + 4);
return index2 + (high - low + 1) * 4 + 8;
}
// else
// throw new BadBytecode(opcode);
}
}
catch (IndexOutOfBoundsException e) {
}
// opcode is UNUSED or an IndexOutOfBoundsException was thrown.
throw new BadBytecode(opcode);
}
// methods for implementing insertGap().
static class AlignmentException extends Exception {}
/**
* insertGapCore0() inserts a gap (some NOPs).
* It cannot handle a long code sequence more than 32K. All branch offsets must be
* signed 16bits.
*
* If "where" is the beginning of a block statement and exclusive is false,
* then the inserted gap is also included in the block statement.
* "where" must indicate the first byte of an opcode.
* The inserted gap is filled with NOP. gapLength may be extended to
* a multiple of 4.
*
* This method was also called from CodeAttribute.LdcEntry.doit().
*
* @param where It must indicate the first byte of an opcode.
*/
static byte[] insertGapCore0(byte[] code, int where, int gapLength,
boolean exclusive, ExceptionTable etable, CodeAttribute ca)
throws BadBytecode
{
if (gapLength <= 0)
return code;
try {
return insertGapCore1(code, where, gapLength, exclusive, etable, ca);
}
catch (AlignmentException e) {
try {
return insertGapCore1(code, where, (gapLength + 3) & ~3,
exclusive, etable, ca);
}
catch (AlignmentException e2) {
throw new RuntimeException("fatal error?");
}
}
}
private static byte[] insertGapCore1(byte[] code, int where, int gapLength,
boolean exclusive, ExceptionTable etable,
CodeAttribute ca)
throws BadBytecode, AlignmentException
{
int codeLength = code.length;
byte[] newcode = new byte[codeLength + gapLength];
insertGap2(code, where, gapLength, codeLength, newcode, exclusive);
etable.shiftPc(where, gapLength, exclusive);
LineNumberAttribute na
= (LineNumberAttribute)ca.getAttribute(LineNumberAttribute.tag);
if (na != null)
na.shiftPc(where, gapLength, exclusive);
LocalVariableAttribute va = (LocalVariableAttribute)ca.getAttribute(
LocalVariableAttribute.tag);
if (va != null)
va.shiftPc(where, gapLength, exclusive);
LocalVariableAttribute vta
= (LocalVariableAttribute)ca.getAttribute(
LocalVariableAttribute.typeTag);
if (vta != null)
vta.shiftPc(where, gapLength, exclusive);
StackMapTable smt = (StackMapTable)ca.getAttribute(StackMapTable.tag);
if (smt != null)
smt.shiftPc(where, gapLength, exclusive);
StackMap sm = (StackMap)ca.getAttribute(StackMap.tag);
if (sm != null)
sm.shiftPc(where, gapLength, exclusive);
return newcode;
}
private static void insertGap2(byte[] code, int where, int gapLength,
int endPos, byte[] newcode, boolean exclusive)
throws BadBytecode, AlignmentException
{
int nextPos;
int i = 0;
int j = 0;
for (; i < endPos; i = nextPos) {
if (i == where) {
int j2 = j + gapLength;
while (j < j2)
newcode[j++] = NOP;
}
nextPos = nextOpcode(code, i);
int inst = code[i] & 0xff;
// if, if_icmp, if_acmp, goto, jsr
if ((153 <= inst && inst <= 168)
|| inst == IFNULL || inst == IFNONNULL) {
/* 2bytes *signed* offset */
int offset = (code[i + 1] << 8) | (code[i + 2] & 0xff);
offset = newOffset(i, offset, where, gapLength, exclusive);
newcode[j] = code[i];
ByteArray.write16bit(offset, newcode, j + 1);
j += 3;
}
else if (inst == GOTO_W || inst == JSR_W) {
/* 4bytes offset */
int offset = ByteArray.read32bit(code, i + 1);
offset = newOffset(i, offset, where, gapLength, exclusive);
newcode[j++] = code[i];
ByteArray.write32bit(offset, newcode, j);
j += 4;
}
else if (inst == TABLESWITCH) {
if (i != j && (gapLength & 3) != 0)
throw new AlignmentException();
int i2 = (i & ~3) + 4; // 0-3 byte padding
// IBM JVM 1.4.2 cannot run the following code:
// int i0 = i;
// while (i0 < i2)
// newcode[j++] = code[i0++];
// So extracting this code into an external method.
// see JIRA JASSIST-74.
j = copyGapBytes(newcode, j, code, i, i2);
int defaultbyte = newOffset(i, ByteArray.read32bit(code, i2),
where, gapLength, exclusive);
ByteArray.write32bit(defaultbyte, newcode, j);
int lowbyte = ByteArray.read32bit(code, i2 + 4);
ByteArray.write32bit(lowbyte, newcode, j + 4);
int highbyte = ByteArray.read32bit(code, i2 + 8);
ByteArray.write32bit(highbyte, newcode, j + 8);
j += 12;
int i0 = i2 + 12;
i2 = i0 + (highbyte - lowbyte + 1) * 4;
while (i0 < i2) {
int offset = newOffset(i, ByteArray.read32bit(code, i0),
where, gapLength, exclusive);
ByteArray.write32bit(offset, newcode, j);
j += 4;
i0 += 4;
}
}
else if (inst == LOOKUPSWITCH) {
if (i != j && (gapLength & 3) != 0)
throw new AlignmentException();
int i2 = (i & ~3) + 4; // 0-3 byte padding
// IBM JVM 1.4.2 cannot run the following code:
// int i0 = i;
// while (i0 < i2)
// newcode[j++] = code[i0++];
// So extracting this code into an external method.
// see JIRA JASSIST-74.
j = copyGapBytes(newcode, j, code, i, i2);
int defaultbyte = newOffset(i, ByteArray.read32bit(code, i2),
where, gapLength, exclusive);
ByteArray.write32bit(defaultbyte, newcode, j);
int npairs = ByteArray.read32bit(code, i2 + 4);
ByteArray.write32bit(npairs, newcode, j + 4);
j += 8;
int i0 = i2 + 8;
i2 = i0 + npairs * 8;
while (i0 < i2) {
ByteArray.copy32bit(code, i0, newcode, j);
int offset = newOffset(i,
ByteArray.read32bit(code, i0 + 4),
where, gapLength, exclusive);
ByteArray.write32bit(offset, newcode, j + 4);
j += 8;
i0 += 8;
}
}
else
while (i < nextPos)
newcode[j++] = code[i++];
}
}
private static int copyGapBytes(byte[] newcode, int j, byte[] code, int i, int iEnd) {
switch (iEnd - i) {
case 4:
newcode[j++] = code[i++];
case 3:
newcode[j++] = code[i++];
case 2:
newcode[j++] = code[i++];
case 1:
newcode[j++] = code[i++];
default:
}
return j;
}
private static int newOffset(int i, int offset, int where,
int gapLength, boolean exclusive) {
int target = i + offset;
if (i < where) {
if (where < target || (exclusive && where == target))
offset += gapLength;
}
else if (i == where) {
// This code is different from the code in Branch#shiftOffset().
// see JASSIST-124.
if (target < where)
offset -= gapLength;
}
else
if (target < where || (!exclusive && where == target))
offset -= gapLength;
return offset;
}
static class Pointers {
int cursor;
int mark0, mark;
ExceptionTable etable;
LineNumberAttribute line;
LocalVariableAttribute vars, types;
StackMapTable stack;
StackMap stack2;
Pointers(int cur, int m, int m0, ExceptionTable et, CodeAttribute ca) {
cursor = cur;
mark = m;
mark0 = m0;
etable = et; // non null
line = (LineNumberAttribute)ca.getAttribute(LineNumberAttribute.tag);
vars = (LocalVariableAttribute)ca.getAttribute(LocalVariableAttribute.tag);
types = (LocalVariableAttribute)ca.getAttribute(LocalVariableAttribute.typeTag);
stack = (StackMapTable)ca.getAttribute(StackMapTable.tag);
stack2 = (StackMap)ca.getAttribute(StackMap.tag);
}
void shiftPc(int where, int gapLength, boolean exclusive) throws BadBytecode {
if (where < cursor || (where == cursor && exclusive))
cursor += gapLength;
if (where < mark || (where == mark && exclusive))
mark += gapLength;
if (where < mark0 || (where == mark0 && exclusive))
mark0 += gapLength;
etable.shiftPc(where, gapLength, exclusive);
if (line != null)
line.shiftPc(where, gapLength, exclusive);
if (vars != null)
vars.shiftPc(where, gapLength, exclusive);
if (types != null)
types.shiftPc(where, gapLength, exclusive);
if (stack != null)
stack.shiftPc(where, gapLength, exclusive);
if (stack2 != null)
stack2.shiftPc(where, gapLength, exclusive);
}
}
/*
* This method is called from CodeAttribute.LdcEntry.doit().
*/
static byte[] changeLdcToLdcW(byte[] code, ExceptionTable etable,
CodeAttribute ca, CodeAttribute.LdcEntry ldcs)
throws BadBytecode
{
ArrayList jumps = makeJumpList(code, code.length);
while (ldcs != null) {
addLdcW(ldcs, jumps);
ldcs = ldcs.next;
}
Pointers pointers = new Pointers(0, 0, 0, etable, ca);
byte[] r = insertGap2w(code, 0, 0, false, jumps, pointers);
return r;
}
private static void addLdcW(CodeAttribute.LdcEntry ldcs, ArrayList jumps) {
int where = ldcs.where;
LdcW ldcw = new LdcW(where, ldcs.index);
int s = jumps.size();
for (int i = 0; i < s; i++)
if (where < ((Branch)jumps.get(i)).orgPos) {
jumps.add(i, ldcw);
return;
}
jumps.add(ldcw);
}
/*
* insertGapCore0w() can handle a long code sequence more than 32K.
* It guarantees that the length of the inserted gap (NOPs) is equal to
* gapLength. No other NOPs except some NOPs following TABLESWITCH or
* LOOKUPSWITCH will not be inserted.
*
* Note: currentPos might be moved.
*
* @param where It must indicate the first byte of an opcode.
* @param newWhere It contains the updated index of the position where a gap
* is inserted and the length of the gap.
* It must not be null.
*/
private byte[] insertGapCore0w(byte[] code, int where, int gapLength, boolean exclusive,
ExceptionTable etable, CodeAttribute ca, Gap newWhere)
throws BadBytecode
{
if (gapLength <= 0)
return code;
ArrayList jumps = makeJumpList(code, code.length);
Pointers pointers = new Pointers(currentPos, mark, where, etable, ca);
byte[] r = insertGap2w(code, where, gapLength, exclusive, jumps, pointers);
currentPos = pointers.cursor;
mark = pointers.mark;
int where2 = pointers.mark0;
if (where2 == currentPos && !exclusive)
currentPos += gapLength;
if (exclusive)
where2 -= gapLength;
newWhere.position = where2;
newWhere.length = gapLength;
return r;
}
private static byte[] insertGap2w(byte[] code, int where, int gapLength,
boolean exclusive, ArrayList jumps, Pointers ptrs)
throws BadBytecode
{
int n = jumps.size();
if (gapLength > 0) {
ptrs.shiftPc(where, gapLength, exclusive);
for (int i = 0; i < n; i++)
((Branch)jumps.get(i)).shift(where, gapLength, exclusive);
}
boolean unstable = true;
do {
while (unstable) {
unstable = false;
for (int i = 0; i < n; i++) {
Branch b = (Branch)jumps.get(i);
if (b.expanded()) {
unstable = true;
int p = b.pos;
int delta = b.deltaSize();
ptrs.shiftPc(p, delta, false);
for (int j = 0; j < n; j++)
((Branch)jumps.get(j)).shift(p, delta, false);
}
}
}
for (int i = 0; i < n; i++) {
Branch b = (Branch)jumps.get(i);
int diff = b.gapChanged();
if (diff > 0) {
unstable = true;
int p = b.pos;
ptrs.shiftPc(p, diff, false);
for (int j = 0; j < n; j++)
((Branch)jumps.get(j)).shift(p, diff, false);
}
}
} while (unstable);
return makeExapndedCode(code, jumps, where, gapLength);
}
private static ArrayList makeJumpList(byte[] code, int endPos)
throws BadBytecode
{
ArrayList jumps = new ArrayList();
int nextPos;
for (int i = 0; i < endPos; i = nextPos) {
nextPos = nextOpcode(code, i);
int inst = code[i] & 0xff;
// if, if_icmp, if_acmp, goto, jsr
if ((153 <= inst && inst <= 168)
|| inst == IFNULL || inst == IFNONNULL) {
/* 2bytes *signed* offset */
int offset = (code[i + 1] << 8) | (code[i + 2] & 0xff);
Branch b;
if (inst == GOTO || inst == JSR)
b = new Jump16(i, offset);
else
b = new If16(i, offset);
jumps.add(b);
}
else if (inst == GOTO_W || inst == JSR_W) {
/* 4bytes offset */
int offset = ByteArray.read32bit(code, i + 1);
jumps.add(new Jump32(i, offset));
}
else if (inst == TABLESWITCH) {
int i2 = (i & ~3) + 4; // 0-3 byte padding
int defaultbyte = ByteArray.read32bit(code, i2);
int lowbyte = ByteArray.read32bit(code, i2 + 4);
int highbyte = ByteArray.read32bit(code, i2 + 8);
int i0 = i2 + 12;
int size = highbyte - lowbyte + 1;
int[] offsets = new int[size];
for (int j = 0; j < size; j++) {
offsets[j] = ByteArray.read32bit(code, i0);
i0 += 4;
}
jumps.add(new Table(i, defaultbyte, lowbyte, highbyte, offsets));
}
else if (inst == LOOKUPSWITCH) {
int i2 = (i & ~3) + 4; // 0-3 byte padding
int defaultbyte = ByteArray.read32bit(code, i2);
int npairs = ByteArray.read32bit(code, i2 + 4);
int i0 = i2 + 8;
int[] matches = new int[npairs];
int[] offsets = new int[npairs];
for (int j = 0; j < npairs; j++) {
matches[j] = ByteArray.read32bit(code, i0);
offsets[j] = ByteArray.read32bit(code, i0 + 4);
i0 += 8;
}
jumps.add(new Lookup(i, defaultbyte, matches, offsets));
}
}
return jumps;
}
private static byte[] makeExapndedCode(byte[] code, ArrayList jumps,
int where, int gapLength)
throws BadBytecode
{
int n = jumps.size();
int size = code.length + gapLength;
for (int i = 0; i < n; i++) {
Branch b = (Branch)jumps.get(i);
size += b.deltaSize();
}
byte[] newcode = new byte[size];
int src = 0, dest = 0, bindex = 0;
int len = code.length;
Branch b;
int bpos;
if (0 < n) {
b = (Branch)jumps.get(0);
bpos = b.orgPos;
}
else {
b = null;
bpos = len; // src will be never equal to bpos
}
while (src < len) {
if (src == where) {
int pos2 = dest + gapLength;
while (dest < pos2)
newcode[dest++] = NOP;
}
if (src != bpos)
newcode[dest++] = code[src++];
else {
int s = b.write(src, code, dest, newcode);
src += s;
dest += s + b.deltaSize();
if (++bindex < n) {
b = (Branch)jumps.get(bindex);
bpos = b.orgPos;
}
else {
b = null;
bpos = len;
}
}
}
return newcode;
}
static abstract class Branch {
int pos, orgPos;
Branch(int p) { pos = orgPos = p; }
void shift(int where, int gapLength, boolean exclusive) {
if (where < pos || (where == pos && exclusive))
pos += gapLength;
}
static int shiftOffset(int i, int offset, int where,
int gapLength, boolean exclusive) {
int target = i + offset;
if (i < where) {
if (where < target || (exclusive && where == target))
offset += gapLength;
}
else if (i == where) {
// This code is different from the code in CodeIterator#newOffset().
// see JASSIST-124.
if (target < where && exclusive)
offset -= gapLength;
else if (where < target && !exclusive)
offset += gapLength;
}
else
if (target < where || (!exclusive && where == target))
offset -= gapLength;
return offset;
}
boolean expanded() { return false; }
int gapChanged() { return 0; }
int deltaSize() { return 0; } // newSize - oldSize
// This returns the original instruction size.
abstract int write(int srcPos, byte[] code, int destPos, byte[] newcode);
}
/* used by changeLdcToLdcW() and CodeAttribute.LdcEntry.
*/
static class LdcW extends Branch {
int index;
boolean state;
LdcW(int p, int i) {
super(p);
index = i;
state = true;
}
boolean expanded() {
if (state) {
state = false;
return true;
}
else
return false;
}
int deltaSize() { return 1; }
int write(int srcPos, byte[] code, int destPos, byte[] newcode) {
newcode[destPos] = LDC_W;
ByteArray.write16bit(index, newcode, destPos + 1);
return 2;
}
}
static abstract class Branch16 extends Branch {
int offset;
int state;
static final int BIT16 = 0;
static final int EXPAND = 1;
static final int BIT32 = 2;
Branch16(int p, int off) {
super(p);
offset = off;
state = BIT16;
}
void shift(int where, int gapLength, boolean exclusive) {
offset = shiftOffset(pos, offset, where, gapLength, exclusive);
super.shift(where, gapLength, exclusive);
if (state == BIT16)
if (offset < Short.MIN_VALUE || Short.MAX_VALUE < offset)
state = EXPAND;
}
boolean expanded() {
if (state == EXPAND) {
state = BIT32;
return true;
}
else
return false;
}
abstract int deltaSize();
abstract void write32(int src, byte[] code, int dest, byte[] newcode);
int write(int src, byte[] code, int dest, byte[] newcode) {
if (state == BIT32)
write32(src, code, dest, newcode);
else {
newcode[dest] = code[src];
ByteArray.write16bit(offset, newcode, dest + 1);
}
return 3;
}
}
// GOTO or JSR
static class Jump16 extends Branch16 {
Jump16(int p, int off) {
super(p, off);
}
int deltaSize() {
return state == BIT32 ? 2 : 0;
}
void write32(int src, byte[] code, int dest, byte[] newcode) {
newcode[dest] = (byte)(((code[src] & 0xff) == GOTO) ? GOTO_W : JSR_W);
ByteArray.write32bit(offset, newcode, dest + 1);
}
}
// if, if_icmp, or if_acmp
static class If16 extends Branch16 {
If16(int p, int off) {
super(p, off);
}
int deltaSize() {
return state == BIT32 ? 5 : 0;
}
void write32(int src, byte[] code, int dest, byte[] newcode) {
newcode[dest] = (byte)opcode(code[src] & 0xff);
newcode[dest + 1] = 0;
newcode[dest + 2] = 8; // branch_offset = 8
newcode[dest + 3] = (byte)GOTO_W;
ByteArray.write32bit(offset - 3, newcode, dest + 4);
}
int opcode(int op) {
if (op == IFNULL)
return IFNONNULL;
else if (op == IFNONNULL)
return IFNULL;
else {
if (((op - IFEQ) & 1) == 0)
return op + 1;
else
return op - 1;
}
}
}
static class Jump32 extends Branch {
int offset;
Jump32(int p, int off) {
super(p);
offset = off;
}
void shift(int where, int gapLength, boolean exclusive) {
offset = shiftOffset(pos, offset, where, gapLength, exclusive);
super.shift(where, gapLength, exclusive);
}
int write(int src, byte[] code, int dest, byte[] newcode) {
newcode[dest] = code[src];
ByteArray.write32bit(offset, newcode, dest + 1);
return 5;
}
}
static abstract class Switcher extends Branch {
int gap, defaultByte;
int[] offsets;
Switcher(int pos, int defaultByte, int[] offsets) {
super(pos);
this.gap = 3 - (pos & 3);
this.defaultByte = defaultByte;
this.offsets = offsets;
}
void shift(int where, int gapLength, boolean exclusive) {
int p = pos;
defaultByte = shiftOffset(p, defaultByte, where, gapLength, exclusive);
int num = offsets.length;
for (int i = 0; i < num; i++)
offsets[i] = shiftOffset(p, offsets[i], where, gapLength, exclusive);
super.shift(where, gapLength, exclusive);
}
int gapChanged() {
int newGap = 3 - (pos & 3);
if (newGap > gap) {
int diff = newGap - gap;
gap = newGap;
return diff;
}
return 0;
}
int deltaSize() {
return gap - (3 - (orgPos & 3));
}
int write(int src, byte[] code, int dest, byte[] newcode) {
int padding = 3 - (pos & 3);
int nops = gap - padding;
int bytecodeSize = 5 + (3 - (orgPos & 3)) + tableSize();
adjustOffsets(bytecodeSize, nops);
newcode[dest++] = code[src];
while (padding-- > 0)
newcode[dest++] = 0;
ByteArray.write32bit(defaultByte, newcode, dest);
int size = write2(dest + 4, newcode);
dest += size + 4;
while (nops-- > 0)
newcode[dest++] = NOP;
return 5 + (3 - (orgPos & 3)) + size;
}
abstract int write2(int dest, byte[] newcode);
abstract int tableSize();
/* If the new bytecode size is shorter than the original, some NOPs
* are appended after this branch instruction (tableswitch or
* lookupswitch) to fill the gap.
* This method changes a branch offset to point to the first NOP
* if the offset originally points to the bytecode next to this
* branch instruction. Otherwise, the bytecode would contain
* dead code. It complicates the generation of StackMap and
* StackMapTable.
*/
void adjustOffsets(int size, int nops) {
if (defaultByte == size)
defaultByte -= nops;
for (int i = 0; i < offsets.length; i++)
if (offsets[i] == size)
offsets[i] -= nops;
}
}
static class Table extends Switcher {
int low, high;
Table(int pos, int defaultByte, int low, int high, int[] offsets) {
super(pos, defaultByte, offsets);
this.low = low;
this.high = high;
}
int write2(int dest, byte[] newcode) {
ByteArray.write32bit(low, newcode, dest);
ByteArray.write32bit(high, newcode, dest + 4);
int n = offsets.length;
dest += 8;
for (int i = 0; i < n; i++) {
ByteArray.write32bit(offsets[i], newcode, dest);
dest += 4;
}
return 8 + 4 * n;
}
int tableSize() { return 8 + 4 * offsets.length; }
}
static class Lookup extends Switcher {
int[] matches;
Lookup(int pos, int defaultByte, int[] matches, int[] offsets) {
super(pos, defaultByte, offsets);
this.matches = matches;
}
int write2(int dest, byte[] newcode) {
int n = matches.length;
ByteArray.write32bit(n, newcode, dest);
dest += 4;
for (int i = 0; i < n; i++) {
ByteArray.write32bit(matches[i], newcode, dest);
ByteArray.write32bit(offsets[i], newcode, dest + 4);
dest += 8;
}
return 4 + 8 * n;
}
int tableSize() { return 4 + 8 * matches.length; }
}
}