google.protobuf.descriptor.proto Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of kotlin-util-klib Show documentation
Show all versions of kotlin-util-klib Show documentation
Common klib reader and writer
// Protocol Buffers - Google's data interchange format
// Copyright 2008 Google Inc. All rights reserved.
// http://code.google.com/p/protobuf/
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Author: [email protected] (Kenton Varda)
// Based on original Protocol Buffers design by
// Sanjay Ghemawat, Jeff Dean, and others.
//
// The messages in this file describe the definitions found in .proto files.
// A valid .proto file can be translated directly to a FileDescriptorProto
// without any other information (e.g. without reading its imports).
package google.protobuf;
option java_package = "com.google.protobuf";
option java_outer_classname = "DescriptorProtos";
// descriptor.proto must be optimized for speed because reflection-based
// algorithms don't work during bootstrapping.
option optimize_for = SPEED;
// The protocol compiler can output a FileDescriptorSet containing the .proto
// files it parses.
message FileDescriptorSet {
repeated FileDescriptorProto file = 1;
}
// Describes a complete .proto file.
message FileDescriptorProto {
optional string name = 1; // file name, relative to root of source tree
optional string package = 2; // e.g. "foo", "foo.bar", etc.
// Names of files imported by this file.
repeated string dependency = 3;
// Indexes of the public imported files in the dependency list above.
repeated int32 public_dependency = 10;
// Indexes of the weak imported files in the dependency list.
// For Google-internal migration only. Do not use.
repeated int32 weak_dependency = 11;
// All top-level definitions in this file.
repeated DescriptorProto message_type = 4;
repeated EnumDescriptorProto enum_type = 5;
repeated ServiceDescriptorProto service = 6;
repeated FieldDescriptorProto extension = 7;
optional FileOptions options = 8;
// This field contains optional information about the original source code.
// You may safely remove this entire field whithout harming runtime
// functionality of the descriptors -- the information is needed only by
// development tools.
optional SourceCodeInfo source_code_info = 9;
}
// Describes a message type.
message DescriptorProto {
optional string name = 1;
repeated FieldDescriptorProto field = 2;
repeated FieldDescriptorProto extension = 6;
repeated DescriptorProto nested_type = 3;
repeated EnumDescriptorProto enum_type = 4;
message ExtensionRange {
optional int32 start = 1;
optional int32 end = 2;
}
repeated ExtensionRange extension_range = 5;
optional MessageOptions options = 7;
}
// Describes a field within a message.
message FieldDescriptorProto {
enum Type {
// 0 is reserved for errors.
// Order is weird for historical reasons.
TYPE_DOUBLE = 1;
TYPE_FLOAT = 2;
// Not ZigZag encoded. Negative numbers take 10 bytes. Use TYPE_SINT64 if
// negative values are likely.
TYPE_INT64 = 3;
TYPE_UINT64 = 4;
// Not ZigZag encoded. Negative numbers take 10 bytes. Use TYPE_SINT32 if
// negative values are likely.
TYPE_INT32 = 5;
TYPE_FIXED64 = 6;
TYPE_FIXED32 = 7;
TYPE_BOOL = 8;
TYPE_STRING = 9;
TYPE_GROUP = 10; // Tag-delimited aggregate.
TYPE_MESSAGE = 11; // Length-delimited aggregate.
// New in version 2.
TYPE_BYTES = 12;
TYPE_UINT32 = 13;
TYPE_ENUM = 14;
TYPE_SFIXED32 = 15;
TYPE_SFIXED64 = 16;
TYPE_SINT32 = 17; // Uses ZigZag encoding.
TYPE_SINT64 = 18; // Uses ZigZag encoding.
};
enum Label {
// 0 is reserved for errors
LABEL_OPTIONAL = 1;
LABEL_REQUIRED = 2;
LABEL_REPEATED = 3;
// TODO(sanjay): Should we add LABEL_MAP?
};
optional string name = 1;
optional int32 number = 3;
optional Label label = 4;
// If type_name is set, this need not be set. If both this and type_name
// are set, this must be either TYPE_ENUM or TYPE_MESSAGE.
optional Type type = 5;
// For message and enum types, this is the name of the type. If the name
// starts with a '.', it is fully-qualified. Otherwise, C++-like scoping
// rules are used to find the type (i.e. first the nested types within this
// message are searched, then within the parent, on up to the root
// namespace).
optional string type_name = 6;
// For extensions, this is the name of the type being extended. It is
// resolved in the same manner as type_name.
optional string extendee = 2;
// For numeric types, contains the original text representation of the value.
// For booleans, "true" or "false".
// For strings, contains the default text contents (not escaped in any way).
// For bytes, contains the C escaped value. All bytes >= 128 are escaped.
// TODO(kenton): Base-64 encode?
optional string default_value = 7;
optional FieldOptions options = 8;
}
// Describes an enum type.
message EnumDescriptorProto {
optional string name = 1;
repeated EnumValueDescriptorProto value = 2;
optional EnumOptions options = 3;
}
// Describes a value within an enum.
message EnumValueDescriptorProto {
optional string name = 1;
optional int32 number = 2;
optional EnumValueOptions options = 3;
}
// Describes a service.
message ServiceDescriptorProto {
optional string name = 1;
repeated MethodDescriptorProto method = 2;
optional ServiceOptions options = 3;
}
// Describes a method of a service.
message MethodDescriptorProto {
optional string name = 1;
// Input and output type names. These are resolved in the same way as
// FieldDescriptorProto.type_name, but must refer to a message type.
optional string input_type = 2;
optional string output_type = 3;
optional MethodOptions options = 4;
}
// ===================================================================
// Options
// Each of the definitions above may have "options" attached. These are
// just annotations which may cause code to be generated slightly differently
// or may contain hints for code that manipulates protocol messages.
//
// Clients may define custom options as extensions of the *Options messages.
// These extensions may not yet be known at parsing time, so the parser cannot
// store the values in them. Instead it stores them in a field in the *Options
// message called uninterpreted_option. This field must have the same name
// across all *Options messages. We then use this field to populate the
// extensions when we build a descriptor, at which point all protos have been
// parsed and so all extensions are known.
//
// Extension numbers for custom options may be chosen as follows:
// * For options which will only be used within a single application or
// organization, or for experimental options, use field numbers 50000
// through 99999. It is up to you to ensure that you do not use the
// same number for multiple options.
// * For options which will be published and used publicly by multiple
// independent entities, e-mail [email protected]
// to reserve extension numbers. Simply provide your project name (e.g.
// Object-C plugin) and your porject website (if available) -- there's no need
// to explain how you intend to use them. Usually you only need one extension
// number. You can declare multiple options with only one extension number by
// putting them in a sub-message. See the Custom Options section of the docs
// for examples:
// http://code.google.com/apis/protocolbuffers/docs/proto.html#options
// If this turns out to be popular, a web service will be set up
// to automatically assign option numbers.
message FileOptions {
// Sets the Java package where classes generated from this .proto will be
// placed. By default, the proto package is used, but this is often
// inappropriate because proto packages do not normally start with backwards
// domain names.
optional string java_package = 1;
// If set, all the classes from the .proto file are wrapped in a single
// outer class with the given name. This applies to both Proto1
// (equivalent to the old "--one_java_file" option) and Proto2 (where
// a .proto always translates to a single class, but you may want to
// explicitly choose the class name).
optional string java_outer_classname = 8;
// If set true, then the Java code generator will generate a separate .java
// file for each top-level message, enum, and service defined in the .proto
// file. Thus, these types will *not* be nested inside the outer class
// named by java_outer_classname. However, the outer class will still be
// generated to contain the file's getDescriptor() method as well as any
// top-level extensions defined in the file.
optional bool java_multiple_files = 10 [default=false];
// If set true, then the Java code generator will generate equals() and
// hashCode() methods for all messages defined in the .proto file. This is
// purely a speed optimization, as the AbstractMessage base class includes
// reflection-based implementations of these methods.
optional bool java_generate_equals_and_hash = 20 [default=false];
// Generated classes can be optimized for speed or code size.
enum OptimizeMode {
SPEED = 1; // Generate complete code for parsing, serialization,
// etc.
CODE_SIZE = 2; // Use ReflectionOps to implement these methods.
LITE_RUNTIME = 3; // Generate code using MessageLite and the lite runtime.
}
optional OptimizeMode optimize_for = 9 [default=SPEED];
// Sets the Go package where structs generated from this .proto will be
// placed. There is no default.
optional string go_package = 11;
// Should generic services be generated in each language? "Generic" services
// are not specific to any particular RPC system. They are generated by the
// main code generators in each language (without additional plugins).
// Generic services were the only kind of service generation supported by
// early versions of proto2.
//
// Generic services are now considered deprecated in favor of using plugins
// that generate code specific to your particular RPC system. Therefore,
// these default to false. Old code which depends on generic services should
// explicitly set them to true.
optional bool cc_generic_services = 16 [default=false];
optional bool java_generic_services = 17 [default=false];
optional bool py_generic_services = 18 [default=false];
// The parser stores options it doesn't recognize here. See above.
repeated UninterpretedOption uninterpreted_option = 999;
// Clients can define custom options in extensions of this message. See above.
extensions 1000 to max;
}
message MessageOptions {
// Set true to use the old proto1 MessageSet wire format for extensions.
// This is provided for backwards-compatibility with the MessageSet wire
// format. You should not use this for any other reason: It's less
// efficient, has fewer features, and is more complicated.
//
// The message must be defined exactly as follows:
// message Foo {
// option message_set_wire_format = true;
// extensions 4 to max;
// }
// Note that the message cannot have any defined fields; MessageSets only
// have extensions.
//
// All extensions of your type must be singular messages; e.g. they cannot
// be int32s, enums, or repeated messages.
//
// Because this is an option, the above two restrictions are not enforced by
// the protocol compiler.
optional bool message_set_wire_format = 1 [default=false];
// Disables the generation of the standard "descriptor()" accessor, which can
// conflict with a field of the same name. This is meant to make migration
// from proto1 easier; new code should avoid fields named "descriptor".
optional bool no_standard_descriptor_accessor = 2 [default=false];
// The parser stores options it doesn't recognize here. See above.
repeated UninterpretedOption uninterpreted_option = 999;
// Clients can define custom options in extensions of this message. See above.
extensions 1000 to max;
}
message FieldOptions {
// The ctype option instructs the C++ code generator to use a different
// representation of the field than it normally would. See the specific
// options below. This option is not yet implemented in the open source
// release -- sorry, we'll try to include it in a future version!
optional CType ctype = 1 [default = STRING];
enum CType {
// Default mode.
STRING = 0;
CORD = 1;
STRING_PIECE = 2;
}
// The packed option can be enabled for repeated primitive fields to enable
// a more efficient representation on the wire. Rather than repeatedly
// writing the tag and type for each element, the entire array is encoded as
// a single length-delimited blob.
optional bool packed = 2;
// Should this field be parsed lazily? Lazy applies only to message-type
// fields. It means that when the outer message is initially parsed, the
// inner message's contents will not be parsed but instead stored in encoded
// form. The inner message will actually be parsed when it is first accessed.
//
// This is only a hint. Implementations are free to choose whether to use
// eager or lazy parsing regardless of the value of this option. However,
// setting this option true suggests that the protocol author believes that
// using lazy parsing on this field is worth the additional bookkeeping
// overhead typically needed to implement it.
//
// This option does not affect the public interface of any generated code;
// all method signatures remain the same. Furthermore, thread-safety of the
// interface is not affected by this option; const methods remain safe to
// call from multiple threads concurrently, while non-const methods continue
// to require exclusive access.
//
//
// Note that implementations may choose not to check required fields within
// a lazy sub-message. That is, calling IsInitialized() on the outher message
// may return true even if the inner message has missing required fields.
// This is necessary because otherwise the inner message would have to be
// parsed in order to perform the check, defeating the purpose of lazy
// parsing. An implementation which chooses not to check required fields
// must be consistent about it. That is, for any particular sub-message, the
// implementation must either *always* check its required fields, or *never*
// check its required fields, regardless of whether or not the message has
// been parsed.
optional bool lazy = 5 [default=false];
// Is this field deprecated?
// Depending on the target platform, this can emit Deprecated annotations
// for accessors, or it will be completely ignored; in the very least, this
// is a formalization for deprecating fields.
optional bool deprecated = 3 [default=false];
// EXPERIMENTAL. DO NOT USE.
// For "map" fields, the name of the field in the enclosed type that
// is the key for this map. For example, suppose we have:
// message Item {
// required string name = 1;
// required string value = 2;
// }
// message Config {
// repeated Item items = 1 [experimental_map_key="name"];
// }
// In this situation, the map key for Item will be set to "name".
// TODO: Fully-implement this, then remove the "experimental_" prefix.
optional string experimental_map_key = 9;
// For Google-internal migration only. Do not use.
optional bool weak = 10 [default=false];
// The parser stores options it doesn't recognize here. See above.
repeated UninterpretedOption uninterpreted_option = 999;
// Clients can define custom options in extensions of this message. See above.
extensions 1000 to max;
}
message EnumOptions {
// Set this option to false to disallow mapping different tag names to a same
// value.
optional bool allow_alias = 2 [default=true];
// The parser stores options it doesn't recognize here. See above.
repeated UninterpretedOption uninterpreted_option = 999;
// Clients can define custom options in extensions of this message. See above.
extensions 1000 to max;
}
message EnumValueOptions {
// The parser stores options it doesn't recognize here. See above.
repeated UninterpretedOption uninterpreted_option = 999;
// Clients can define custom options in extensions of this message. See above.
extensions 1000 to max;
}
message ServiceOptions {
// Note: Field numbers 1 through 32 are reserved for Google's internal RPC
// framework. We apologize for hoarding these numbers to ourselves, but
// we were already using them long before we decided to release Protocol
// Buffers.
// The parser stores options it doesn't recognize here. See above.
repeated UninterpretedOption uninterpreted_option = 999;
// Clients can define custom options in extensions of this message. See above.
extensions 1000 to max;
}
message MethodOptions {
// Note: Field numbers 1 through 32 are reserved for Google's internal RPC
// framework. We apologize for hoarding these numbers to ourselves, but
// we were already using them long before we decided to release Protocol
// Buffers.
// The parser stores options it doesn't recognize here. See above.
repeated UninterpretedOption uninterpreted_option = 999;
// Clients can define custom options in extensions of this message. See above.
extensions 1000 to max;
}
// A message representing a option the parser does not recognize. This only
// appears in options protos created by the compiler::Parser class.
// DescriptorPool resolves these when building Descriptor objects. Therefore,
// options protos in descriptor objects (e.g. returned by Descriptor::options(),
// or produced by Descriptor::CopyTo()) will never have UninterpretedOptions
// in them.
message UninterpretedOption {
// The name of the uninterpreted option. Each string represents a segment in
// a dot-separated name. is_extension is true iff a segment represents an
// extension (denoted with parentheses in options specs in .proto files).
// E.g.,{ ["foo", false], ["bar.baz", true], ["qux", false] } represents
// "foo.(bar.baz).qux".
message NamePart {
required string name_part = 1;
required bool is_extension = 2;
}
repeated NamePart name = 2;
// The value of the uninterpreted option, in whatever type the tokenizer
// identified it as during parsing. Exactly one of these should be set.
optional string identifier_value = 3;
optional uint64 positive_int_value = 4;
optional int64 negative_int_value = 5;
optional double double_value = 6;
optional bytes string_value = 7;
optional string aggregate_value = 8;
}
// ===================================================================
// Optional source code info
// Encapsulates information about the original source file from which a
// FileDescriptorProto was generated.
message SourceCodeInfo {
// A Location identifies a piece of source code in a .proto file which
// corresponds to a particular definition. This information is intended
// to be useful to IDEs, code indexers, documentation generators, and similar
// tools.
//
// For example, say we have a file like:
// message Foo {
// optional string foo = 1;
// }
// Let's look at just the field definition:
// optional string foo = 1;
// ^ ^^ ^^ ^ ^^^
// a bc de f ghi
// We have the following locations:
// span path represents
// [a,i) [ 4, 0, 2, 0 ] The whole field definition.
// [a,b) [ 4, 0, 2, 0, 4 ] The label (optional).
// [c,d) [ 4, 0, 2, 0, 5 ] The type (string).
// [e,f) [ 4, 0, 2, 0, 1 ] The name (foo).
// [g,h) [ 4, 0, 2, 0, 3 ] The number (1).
//
// Notes:
// - A location may refer to a repeated field itself (i.e. not to any
// particular index within it). This is used whenever a set of elements are
// logically enclosed in a single code segment. For example, an entire
// extend block (possibly containing multiple extension definitions) will
// have an outer location whose path refers to the "extensions" repeated
// field without an index.
// - Multiple locations may have the same path. This happens when a single
// logical declaration is spread out across multiple places. The most
// obvious example is the "extend" block again -- there may be multiple
// extend blocks in the same scope, each of which will have the same path.
// - A location's span is not always a subset of its parent's span. For
// example, the "extendee" of an extension declaration appears at the
// beginning of the "extend" block and is shared by all extensions within
// the block.
// - Just because a location's span is a subset of some other location's span
// does not mean that it is a descendent. For example, a "group" defines
// both a type and a field in a single declaration. Thus, the locations
// corresponding to the type and field and their components will overlap.
// - Code which tries to interpret locations should probably be designed to
// ignore those that it doesn't understand, as more types of locations could
// be recorded in the future.
repeated Location location = 1;
message Location {
// Identifies which part of the FileDescriptorProto was defined at this
// location.
//
// Each element is a field number or an index. They form a path from
// the root FileDescriptorProto to the place where the definition. For
// example, this path:
// [ 4, 3, 2, 7, 1 ]
// refers to:
// file.message_type(3) // 4, 3
// .field(7) // 2, 7
// .name() // 1
// This is because FileDescriptorProto.message_type has field number 4:
// repeated DescriptorProto message_type = 4;
// and DescriptorProto.field has field number 2:
// repeated FieldDescriptorProto field = 2;
// and FieldDescriptorProto.name has field number 1:
// optional string name = 1;
//
// Thus, the above path gives the location of a field name. If we removed
// the last element:
// [ 4, 3, 2, 7 ]
// this path refers to the whole field declaration (from the beginning
// of the label to the terminating semicolon).
repeated int32 path = 1 [packed=true];
// Always has exactly three or four elements: start line, start column,
// end line (optional, otherwise assumed same as start line), end column.
// These are packed into a single field for efficiency. Note that line
// and column numbers are zero-based -- typically you will want to add
// 1 to each before displaying to a user.
repeated int32 span = 2 [packed=true];
// If this SourceCodeInfo represents a complete declaration, these are any
// comments appearing before and after the declaration which appear to be
// attached to the declaration.
//
// A series of line comments appearing on consecutive lines, with no other
// tokens appearing on those lines, will be treated as a single comment.
//
// Only the comment content is provided; comment markers (e.g. //) are
// stripped out. For block comments, leading whitespace and an asterisk
// will be stripped from the beginning of each line other than the first.
// Newlines are included in the output.
//
// Examples:
//
// optional int32 foo = 1; // Comment attached to foo.
// // Comment attached to bar.
// optional int32 bar = 2;
//
// optional string baz = 3;
// // Comment attached to baz.
// // Another line attached to baz.
//
// // Comment attached to qux.
// //
// // Another line attached to qux.
// optional double qux = 4;
//
// optional string corge = 5;
// /* Block comment attached
// * to corge. Leading asterisks
// * will be removed. */
// /* Block comment attached to
// * grault. */
// optional int32 grault = 6;
optional string leading_comments = 3;
optional string trailing_comments = 4;
}
}