jogamp.opengl.glu.tessellator.Render Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of jogl-all Show documentation
Show all versions of jogl-all Show documentation
Java™ Binding for the OpenGL® API
/*
* Portions Copyright (C) 2003-2006 Sun Microsystems, Inc.
* All rights reserved.
*/
/*
** License Applicability. Except to the extent portions of this file are
** made subject to an alternative license as permitted in the SGI Free
** Software License B, Version 2.0 (the "License"), the contents of this
** file are subject only to the provisions of the License. You may not use
** this file except in compliance with the License. You may obtain a copy
** of the License at Silicon Graphics, Inc., attn: Legal Services, 1600
** Amphitheatre Parkway, Mountain View, CA 94043-1351, or at:
**
** http://oss.sgi.com/projects/FreeB
**
** Note that, as provided in the License, the Software is distributed on an
** "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS
** DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND
** CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
** PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
**
** NOTE: The Original Code (as defined below) has been licensed to Sun
** Microsystems, Inc. ("Sun") under the SGI Free Software License B
** (Version 1.1), shown above ("SGI License"). Pursuant to Section
** 3.2(3) of the SGI License, Sun is distributing the Covered Code to
** you under an alternative license ("Alternative License"). This
** Alternative License includes all of the provisions of the SGI License
** except that Section 2.2 and 11 are omitted. Any differences between
** the Alternative License and the SGI License are offered solely by Sun
** and not by SGI.
**
** Original Code. The Original Code is: OpenGL Sample Implementation,
** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics,
** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc.
** Copyright in any portions created by third parties is as indicated
** elsewhere herein. All Rights Reserved.
**
** Additional Notice Provisions: The application programming interfaces
** established by SGI in conjunction with the Original Code are The
** OpenGL(R) Graphics System: A Specification (Version 1.2.1), released
** April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version
** 1.3), released November 4, 1998; and OpenGL(R) Graphics with the X
** Window System(R) (Version 1.3), released October 19, 1998. This software
** was created using the OpenGL(R) version 1.2.1 Sample Implementation
** published by SGI, but has not been independently verified as being
** compliant with the OpenGL(R) version 1.2.1 Specification.
**
** Author: Eric Veach, July 1994
** Java Port: Pepijn Van Eeckhoudt, July 2003
** Java Port: Nathan Parker Burg, August 2003
*/
package jogamp.opengl.glu.tessellator;
import javax.media.opengl.*;
import javax.media.opengl.glu.*;
class Render {
private static final boolean USE_OPTIMIZED_CODE_PATH = false;
private Render() {
}
private static final RenderFan renderFan = new RenderFan();
private static final RenderStrip renderStrip = new RenderStrip();
private static final RenderTriangle renderTriangle = new RenderTriangle();
/* This structure remembers the information we need about a primitive
* to be able to render it later, once we have determined which
* primitive is able to use the most triangles.
*/
private static class FaceCount {
public FaceCount() {
}
public FaceCount(long size, jogamp.opengl.glu.tessellator.GLUhalfEdge eStart, renderCallBack render) {
this.size = size;
this.eStart = eStart;
this.render = render;
}
long size; /* number of triangles used */
jogamp.opengl.glu.tessellator.GLUhalfEdge eStart; /* edge where this primitive starts */
renderCallBack render;
};
private static interface renderCallBack {
void render(GLUtessellatorImpl tess, jogamp.opengl.glu.tessellator.GLUhalfEdge e, long size);
}
/************************ Strips and Fans decomposition ******************/
/* __gl_renderMesh( tess, mesh ) takes a mesh and breaks it into triangle
* fans, strips, and separate triangles. A substantial effort is made
* to use as few rendering primitives as possible (ie. to make the fans
* and strips as large as possible).
*
* The rendering output is provided as callbacks (see the api).
*/
public static void __gl_renderMesh(GLUtessellatorImpl tess, jogamp.opengl.glu.tessellator.GLUmesh mesh) {
jogamp.opengl.glu.tessellator.GLUface f;
/* Make a list of separate triangles so we can render them all at once */
tess.lonelyTriList = null;
for (f = mesh.fHead.next; f != mesh.fHead; f = f.next) {
f.marked = false;
}
for (f = mesh.fHead.next; f != mesh.fHead; f = f.next) {
/* We examine all faces in an arbitrary order. Whenever we find
* an unprocessed face F, we output a group of faces including F
* whose size is maximum.
*/
if (f.inside && !f.marked) {
RenderMaximumFaceGroup(tess, f);
assert (f.marked);
}
}
if (tess.lonelyTriList != null) {
RenderLonelyTriangles(tess, tess.lonelyTriList);
tess.lonelyTriList = null;
}
}
static void RenderMaximumFaceGroup(GLUtessellatorImpl tess, jogamp.opengl.glu.tessellator.GLUface fOrig) {
/* We want to find the largest triangle fan or strip of unmarked faces
* which includes the given face fOrig. There are 3 possible fans
* passing through fOrig (one centered at each vertex), and 3 possible
* strips (one for each CCW permutation of the vertices). Our strategy
* is to try all of these, and take the primitive which uses the most
* triangles (a greedy approach).
*/
jogamp.opengl.glu.tessellator.GLUhalfEdge e = fOrig.anEdge;
FaceCount max = new FaceCount();
FaceCount newFace = new FaceCount();
max.size = 1;
max.eStart = e;
max.render = renderTriangle;
if (!tess.flagBoundary) {
newFace = MaximumFan(e);
if (newFace.size > max.size) {
max = newFace;
}
newFace = MaximumFan(e.Lnext);
if (newFace.size > max.size) {
max = newFace;
}
newFace = MaximumFan(e.Onext.Sym);
if (newFace.size > max.size) {
max = newFace;
}
newFace = MaximumStrip(e);
if (newFace.size > max.size) {
max = newFace;
}
newFace = MaximumStrip(e.Lnext);
if (newFace.size > max.size) {
max = newFace;
}
newFace = MaximumStrip(e.Onext.Sym);
if (newFace.size > max.size) {
max = newFace;
}
}
max.render.render(tess, max.eStart, max.size);
}
/* Macros which keep track of faces we have marked temporarily, and allow
* us to backtrack when necessary. With triangle fans, this is not
* really necessary, since the only awkward case is a loop of triangles
* around a single origin vertex. However with strips the situation is
* more complicated, and we need a general tracking method like the
* one here.
*/
private static boolean Marked(jogamp.opengl.glu.tessellator.GLUface f) {
return !f.inside || f.marked;
}
private static GLUface AddToTrail(jogamp.opengl.glu.tessellator.GLUface f, jogamp.opengl.glu.tessellator.GLUface t) {
f.trail = t;
f.marked = true;
return f;
}
private static void FreeTrail(jogamp.opengl.glu.tessellator.GLUface t) {
if (true) {
while (t != null) {
t.marked = false;
t = t.trail;
}
} else {
/* absorb trailing semicolon */
}
}
static FaceCount MaximumFan(jogamp.opengl.glu.tessellator.GLUhalfEdge eOrig) {
/* eOrig.Lface is the face we want to render. We want to find the size
* of a maximal fan around eOrig.Org. To do this we just walk around
* the origin vertex as far as possible in both directions.
*/
FaceCount newFace = new FaceCount(0, null, renderFan);
jogamp.opengl.glu.tessellator.GLUface trail = null;
jogamp.opengl.glu.tessellator.GLUhalfEdge e;
for (e = eOrig; !Marked(e.Lface); e = e.Onext) {
trail = AddToTrail(e.Lface, trail);
++newFace.size;
}
for (e = eOrig; !Marked(e.Sym.Lface); e = e.Sym.Lnext) {
trail = AddToTrail(e.Sym.Lface, trail);
++newFace.size;
}
newFace.eStart = e;
/*LINTED*/
FreeTrail(trail);
return newFace;
}
private static boolean IsEven(long n) {
return (n & 0x1L) == 0;
}
static FaceCount MaximumStrip(jogamp.opengl.glu.tessellator.GLUhalfEdge eOrig) {
/* Here we are looking for a maximal strip that contains the vertices
* eOrig.Org, eOrig.Dst, eOrig.Lnext.Dst (in that order or the
* reverse, such that all triangles are oriented CCW).
*
* Again we walk forward and backward as far as possible. However for
* strips there is a twist: to get CCW orientations, there must be
* an *even* number of triangles in the strip on one side of eOrig.
* We walk the strip starting on a side with an even number of triangles;
* if both side have an odd number, we are forced to shorten one side.
*/
FaceCount newFace = new FaceCount(0, null, renderStrip);
long headSize = 0, tailSize = 0;
jogamp.opengl.glu.tessellator.GLUface trail = null;
jogamp.opengl.glu.tessellator.GLUhalfEdge e, eTail, eHead;
for (e = eOrig; !Marked(e.Lface); ++tailSize, e = e.Onext) {
trail = AddToTrail(e.Lface, trail);
++tailSize;
e = e.Lnext.Sym;
if (Marked(e.Lface)) break;
trail = AddToTrail(e.Lface, trail);
}
eTail = e;
for (e = eOrig; !Marked(e.Sym.Lface); ++headSize, e = e.Sym.Onext.Sym) {
trail = AddToTrail(e.Sym.Lface, trail);
++headSize;
e = e.Sym.Lnext;
if (Marked(e.Sym.Lface)) break;
trail = AddToTrail(e.Sym.Lface, trail);
}
eHead = e;
newFace.size = tailSize + headSize;
if (IsEven(tailSize)) {
newFace.eStart = eTail.Sym;
} else if (IsEven(headSize)) {
newFace.eStart = eHead;
} else {
/* Both sides have odd length, we must shorten one of them. In fact,
* we must start from eHead to guarantee inclusion of eOrig.Lface.
*/
--newFace.size;
newFace.eStart = eHead.Onext;
}
/*LINTED*/
FreeTrail(trail);
return newFace;
}
private static class RenderTriangle implements renderCallBack {
public void render(GLUtessellatorImpl tess, jogamp.opengl.glu.tessellator.GLUhalfEdge e, long size) {
/* Just add the triangle to a triangle list, so we can render all
* the separate triangles at once.
*/
assert (size == 1);
tess.lonelyTriList = AddToTrail(e.Lface, tess.lonelyTriList);
}
}
static void RenderLonelyTriangles(GLUtessellatorImpl tess, jogamp.opengl.glu.tessellator.GLUface f) {
/* Now we render all the separate triangles which could not be
* grouped into a triangle fan or strip.
*/
jogamp.opengl.glu.tessellator.GLUhalfEdge e;
int newState;
int edgeState = -1; /* force edge state output for first vertex */
tess.callBeginOrBeginData(GL.GL_TRIANGLES);
for (; f != null; f = f.trail) {
/* Loop once for each edge (there will always be 3 edges) */
e = f.anEdge;
do {
if (tess.flagBoundary) {
/* Set the "edge state" to true just before we output the
* first vertex of each edge on the polygon boundary.
*/
newState = (!e.Sym.Lface.inside) ? 1 : 0;
if (edgeState != newState) {
edgeState = newState;
tess.callEdgeFlagOrEdgeFlagData( edgeState != 0);
}
}
tess.callVertexOrVertexData( e.Org.data);
e = e.Lnext;
} while (e != f.anEdge);
}
tess.callEndOrEndData();
}
private static class RenderFan implements renderCallBack {
public void render(GLUtessellatorImpl tess, jogamp.opengl.glu.tessellator.GLUhalfEdge e, long size) {
/* Render as many CCW triangles as possible in a fan starting from
* edge "e". The fan *should* contain exactly "size" triangles
* (otherwise we've goofed up somewhere).
*/
tess.callBeginOrBeginData( GL.GL_TRIANGLE_FAN);
tess.callVertexOrVertexData( e.Org.data);
tess.callVertexOrVertexData( e.Sym.Org.data);
while (!Marked(e.Lface)) {
e.Lface.marked = true;
--size;
e = e.Onext;
tess.callVertexOrVertexData( e.Sym.Org.data);
}
assert (size == 0);
tess.callEndOrEndData();
}
}
private static class RenderStrip implements renderCallBack {
public void render(GLUtessellatorImpl tess, jogamp.opengl.glu.tessellator.GLUhalfEdge e, long size) {
/* Render as many CCW triangles as possible in a strip starting from
* edge "e". The strip *should* contain exactly "size" triangles
* (otherwise we've goofed up somewhere).
*/
tess.callBeginOrBeginData( GL.GL_TRIANGLE_STRIP);
tess.callVertexOrVertexData( e.Org.data);
tess.callVertexOrVertexData( e.Sym.Org.data);
while (!Marked(e.Lface)) {
e.Lface.marked = true;
--size;
e = e.Lnext.Sym;
tess.callVertexOrVertexData( e.Org.data);
if (Marked(e.Lface)) break;
e.Lface.marked = true;
--size;
e = e.Onext;
tess.callVertexOrVertexData( e.Sym.Org.data);
}
assert (size == 0);
tess.callEndOrEndData();
}
}
/************************ Boundary contour decomposition ******************/
/* __gl_renderBoundary( tess, mesh ) takes a mesh, and outputs one
* contour for each face marked "inside". The rendering output is
* provided as callbacks (see the api).
*/
public static void __gl_renderBoundary(GLUtessellatorImpl tess, jogamp.opengl.glu.tessellator.GLUmesh mesh) {
jogamp.opengl.glu.tessellator.GLUface f;
jogamp.opengl.glu.tessellator.GLUhalfEdge e;
for (f = mesh.fHead.next; f != mesh.fHead; f = f.next) {
if (f.inside) {
tess.callBeginOrBeginData( GL.GL_LINE_LOOP);
e = f.anEdge;
do {
tess.callVertexOrVertexData( e.Org.data);
e = e.Lnext;
} while (e != f.anEdge);
tess.callEndOrEndData();
}
}
}
/************************ Quick-and-dirty decomposition ******************/
private static final int SIGN_INCONSISTENT = 2;
static int ComputeNormal(GLUtessellatorImpl tess, double[] norm, boolean check)
/*
* If check==false, we compute the polygon normal and place it in norm[].
* If check==true, we check that each triangle in the fan from v0 has a
* consistent orientation with respect to norm[]. If triangles are
* consistently oriented CCW, return 1; if CW, return -1; if all triangles
* are degenerate return 0; otherwise (no consistent orientation) return
* SIGN_INCONSISTENT.
*/ {
jogamp.opengl.glu.tessellator.CachedVertex[] v = tess.cache;
// CachedVertex vn = v0 + tess.cacheCount;
int vn = tess.cacheCount;
// CachedVertex vc;
int vc;
double dot, xc, yc, zc, xp, yp, zp;
double[] n = new double[3];
int sign = 0;
/* Find the polygon normal. It is important to get a reasonable
* normal even when the polygon is self-intersecting (eg. a bowtie).
* Otherwise, the computed normal could be very tiny, but perpendicular
* to the true plane of the polygon due to numerical noise. Then all
* the triangles would appear to be degenerate and we would incorrectly
* decompose the polygon as a fan (or simply not render it at all).
*
* We use a sum-of-triangles normal algorithm rather than the more
* efficient sum-of-trapezoids method (used in CheckOrientation()
* in normal.c). This lets us explicitly reverse the signed area
* of some triangles to get a reasonable normal in the self-intersecting
* case.
*/
if (!check) {
norm[0] = norm[1] = norm[2] = 0.0;
}
vc = 1;
xc = v[vc].coords[0] - v[0].coords[0];
yc = v[vc].coords[1] - v[0].coords[1];
zc = v[vc].coords[2] - v[0].coords[2];
while (++vc < vn) {
xp = xc;
yp = yc;
zp = zc;
xc = v[vc].coords[0] - v[0].coords[0];
yc = v[vc].coords[1] - v[0].coords[1];
zc = v[vc].coords[2] - v[0].coords[2];
/* Compute (vp - v0) cross (vc - v0) */
n[0] = yp * zc - zp * yc;
n[1] = zp * xc - xp * zc;
n[2] = xp * yc - yp * xc;
dot = n[0] * norm[0] + n[1] * norm[1] + n[2] * norm[2];
if (!check) {
/* Reverse the contribution of back-facing triangles to get
* a reasonable normal for self-intersecting polygons (see above)
*/
if (dot >= 0) {
norm[0] += n[0];
norm[1] += n[1];
norm[2] += n[2];
} else {
norm[0] -= n[0];
norm[1] -= n[1];
norm[2] -= n[2];
}
} else if (dot != 0) {
/* Check the new orientation for consistency with previous triangles */
if (dot > 0) {
if (sign < 0) return SIGN_INCONSISTENT;
sign = 1;
} else {
if (sign > 0) return SIGN_INCONSISTENT;
sign = -1;
}
}
}
return sign;
}
/* __gl_renderCache( tess ) takes a single contour and tries to render it
* as a triangle fan. This handles convex polygons, as well as some
* non-convex polygons if we get lucky.
*
* Returns true if the polygon was successfully rendered. The rendering
* output is provided as callbacks (see the api).
*/
public static boolean __gl_renderCache(GLUtessellatorImpl tess) {
jogamp.opengl.glu.tessellator.CachedVertex[] v = tess.cache;
// CachedVertex vn = v0 + tess.cacheCount;
int vn = tess.cacheCount;
// CachedVertex vc;
int vc;
double[] norm = new double[3];
int sign;
if (tess.cacheCount < 3) {
/* Degenerate contour -- no output */
return true;
}
norm[0] = tess.normal[0];
norm[1] = tess.normal[1];
norm[2] = tess.normal[2];
if (norm[0] == 0 && norm[1] == 0 && norm[2] == 0) {
ComputeNormal( tess, norm, false);
}
sign = ComputeNormal( tess, norm, true);
if (sign == SIGN_INCONSISTENT) {
/* Fan triangles did not have a consistent orientation */
return false;
}
if (sign == 0) {
/* All triangles were degenerate */
return true;
}
if ( !USE_OPTIMIZED_CODE_PATH ) {
return false;
} else {
/* Make sure we do the right thing for each winding rule */
switch (tess.windingRule) {
case GLU.GLU_TESS_WINDING_ODD:
case GLU.GLU_TESS_WINDING_NONZERO:
break;
case GLU.GLU_TESS_WINDING_POSITIVE:
if (sign < 0) return true;
break;
case GLU.GLU_TESS_WINDING_NEGATIVE:
if (sign > 0) return true;
break;
case GLU.GLU_TESS_WINDING_ABS_GEQ_TWO:
return true;
}
tess.callBeginOrBeginData( tess.boundaryOnly ? GL.GL_LINE_LOOP
: (tess.cacheCount > 3) ? GL.GL_TRIANGLE_FAN
: GL.GL_TRIANGLES);
tess.callVertexOrVertexData( v[0].data);
if (sign > 0) {
for (vc = 1; vc < vn; ++vc) {
tess.callVertexOrVertexData( v[vc].data);
}
} else {
for (vc = vn - 1; vc > 0; --vc) {
tess.callVertexOrVertexData( v[vc].data);
}
}
tess.callEndOrEndData();
return true;
}
}
}