org.jdiameter.api.ResultCode Maven / Gradle / Ivy
/*
* JBoss, Home of Professional Open Source
* Copyright 2006, Red Hat, Inc. and individual contributors
* by the @authors tag. See the copyright.txt in the distribution for a
* full listing of individual contributors.
*
* This is free software; you can redistribute it and/or modify it
* under the terms of the GNU Lesser General Public License as
* published by the Free Software Foundation; either version 2.1 of
* the License, or (at your option) any later version.
*
* This software is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this software; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA, or see the FSF site: http://www.fsf.org.
*/
package org.jdiameter.api;
/**
* This interface describe basic result codes
*
* @author [email protected]
* @author [email protected]
* @version 1.5.1 Final
*/
public interface ResultCode {
/**
* This informational error is returned by a Diameter server to
* inform the access device that the authentication mechanism being
* used requires multiple round trips, and a subsequent request needs
* to be issued in order for access to be granted.
*/
public static final int MULTI_ROUND_AUTH = 1001;
/**
* The Request was successfully completed.
*/
public static final int SUCCESS = 2001;
/**
* When returned, the request was successfully completed, but
* additional processing is required by the application in order to
* provide service to the user.
*/
public static final int LIMITED_SUCCESS = 2002;
/**
* The Request contained a Command-Code that the receiver did not
* recognize or support. This MUST be used when a Diameter node
* receives an experimental command that it does not understand.
*/
public static final int COMMAND_UNSUPPORTED = 3001;
/**
* This error is given when Diameter can not deliver the message to
* the destination, either because no host within the realm
* supporting the required application was available to process the
* request, or because Destination-Host AVP was given without the
* associated Destination-Realm AVP
*/
public static final int UNABLE_TO_DELIVER = 3002;
/**
* The intended realm of the request is not recognized.
*/
public static final int REALM_NOT_SERVED = 3003;
/**
* When returned, a Diameter node SHOULD attempt to send the message
* to an alternate peer. This error MUST only be used when a
* specific server is requested, and it cannot provide the requested
* service.
*/
public static final int TOO_BUSY = 3004;
/**
* An agent detected a loop while trying to get the message to the
* intended recipient. The message MAY be sent to an alternate peer,
* if one is available, but the peer reporting the error has
* identified a configuration problem.
*/
public static final int LOOP_DETECTED = 3005;
/**
* A redirect agent has determined that the request could not be
* satisfied locally and the initiator of the request should direct
* the request directly to the server, whose contact information has
* been added to the response. When set, the Redirect-Host AVP MUST
* be present.
*/
public static final int REDIRECT_INDICATION = 3006;
/**
* A request was sent for an application that is not supported.
*/
public static final int APPLICATION_UNSUPPORTED = 3007;
/**
* A request was received whose bits in the Diameter header were
* either set to an invalid combination, or to a value that is
* inconsistent with the command code's definition.
*/
public static final int INVALID_HDR_BITS = 3008;
/**
* A request was received that included an AVP whose flag bits are
* set to an unrecognized value, or that is inconsistent with the
* AVP's definition.
*/
public static final int INVALID_AVP_BITS = 3009;
/**
* A CER was received from an unknown peer.
*/
public static final int UNKNOWN_PEER = 3010;
/**
* The authentication process for the user failed, most likely due to
* an invalid password used by the user. Further attempts MUST only
* be tried after prompting the user for a new password.
*/
public static final int AUTHENTICATION_REJECTED = 4001;
/**
* A Diameter node received the accounting request but was unable to
* commit it to stable storage due to a temporary lack of space.
*/
public static final int OUT_OF_SPACE = 4002;
/**
* The peer has determined that it has lost the election process and
* has therefore disconnected the transport connection.
*/
public static final int ELECTION_LOST = 4003;
/**
* The peer received a message that contained an AVP that is not
* recognized or supported and was marked with the Mandatory bit. A
* Diameter message with this error MUST contain one or more Failed-
* AVP AVP containing the AVPs that caused the failure.
*/
public static final int AVP_UNSUPPORTED = 5001;
/**
* The request contained an unknown Session-Id.
*/
public static final int UNKNOWN_SESSION_ID = 5002;
/**
* A request was received for which the user could not be authorized.
* This error could occur if the service requested is not permitted
* to the user.
*/
public static final int AUTHORIZATION_REJECTED = 5003;
/**
* The request contained an AVP with an invalid value in its data
* portion. A Diameter message indicating this error MUST include
* the offending AVPs within a Failed-AVP AVP.
*/
public static final int INVALID_AVP_VALUE = 5004;
/**
* The request did not contain an AVP that is required by the Command
* Code definition. If this value is sent in the Result-Code AVP, a
* Failed-AVP AVP SHOULD be included in the message. The Failed-AVP
* AVP MUST contain an example of the missing AVP complete with the
* Vendor-Id if applicable. The value field of the missing AVP
* should be of correct minimum length and contain zeroes.
*/
public static final int MISSING_AVP = 5005;
/**
* A request was received that cannot be authorized because the user
* has already expended allowed resources. An example of this error
* condition is a user that is restricted to one dial-up PPP port,
* attempts to establish a second PPP connection.
*/
public static final int RESOURCES_EXCEEDED = 5006;
/**
* The Home Diameter server has detected AVPs in the request that
* contradicted each other, and is not willing to provide service to
* the user. One or more Failed-AVP AVPs MUST be present, containing
* the AVPs that contradicted each other.
*/
public static final int CONTRADICTING_AVPS = 5007;
/**
* A message was received with an AVP that MUST NOT be present. The
* Failed-AVP AVP MUST be included and contain a copy of the
* offending AVP.
*/
public static final int AVP_NOT_ALLOWED = 5008;
/**
* A message was received that included an AVP that appeared more
* often than permitted in the message definition. The Failed-AVP
* AVP MUST be included and contain a copy of the first instance of
* the offending AVP that exceeded the maximum number of occurrences
*/
public static final int AVP_OCCURS_TOO_MANY_TIMES = 5009;
/**
* This error is returned when a CER message is received, and there
* are no common applications supported between the peers.
*/
public static final int NO_COMMON_APPLICATION = 5010;
/**
* This error is returned when a request was received, whose version
* number is unsupported.
*/
public static final int UNSUPPORTED_VERSION = 5011;
/**
* This error is returned when a request is rejected for unspecified
* reasons.
*/
public static final int UNABLE_TO_COMPLY = 5012;
/**
* This error is returned when an unrecognized bit in the Diameter
* header is set to one (1).
*/
public static final int INVALID_BIT_IN_HEADER = 5013;
/**
* The request contained an AVP with an invalid length. A Diameter
* message indicating this error MUST include the offending AVPs
* within a Failed-AVP AVP.
*/
public static final int INVALID_AVP_LENGTH = 5014;
/**
* This error is returned when a request is received with an invalid
* message length.
*/
public static final int INVALID_MESSAGE_LENGTH = 5015;
/**
* The request contained an AVP with which is not allowed to have the
* given value in the AVP Flags field. A Diameter message indicating
* this error MUST include the offending AVPs within a Failed-AVP
* AVP.
*/
public static final int INVALID_AVP_BIT_COMBO = 5016;
/**
* This error is returned when a CER message is received, and there
* are no common security mechanisms supported between the peers. A
* Capabilities-Exchange-Answer (CEA) MUST be returned with the
* Result-Code AVP set to DIAMETER_NO_COMMON_SECURITY.
*/
public static final int NO_COMMON_SECURITY = 5017;
}
© 2015 - 2025 Weber Informatics LLC | Privacy Policy