com.mongodb.internal.connection.ExtendedAsynchronousByteChannel Maven / Gradle / Ivy
Show all versions of mongo-java-driver Show documentation
/*
* Copyright 2008-present MongoDB, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* Original Work: MIT License, Copyright (c) [2015-2018] all contributors
* https://github.com/marianobarrios/tls-channel
*/
package com.mongodb.internal.connection;
import java.nio.ByteBuffer;
import java.nio.channels.AsynchronousByteChannel;
import java.nio.channels.CompletionHandler;
import java.nio.channels.ReadPendingException;
import java.nio.channels.ShutdownChannelGroupException;
import java.nio.channels.WritePendingException;
import java.util.concurrent.TimeUnit;
/**
* This interface extends {@link AsynchronousByteChannel} adding optional timeouts and scattering and gathering methods.
* These additions are analogous to the ones made by {@link java.nio.channels.AsynchronousSocketChannel}.
*/
public interface ExtendedAsynchronousByteChannel extends AsynchronousByteChannel {
/**
* Reads a sequence of bytes from this channel into the given buffer.
*
* This method initiates an asynchronous read operation to read a
* sequence of bytes from this channel into the given buffer. The {@code
* handler} parameter is a completion handler that is invoked when the read
* operation completes (or fails). The result passed to the completion
* handler is the number of bytes read or {@code -1} if no bytes could be
* read because the channel has reached end-of-stream.
*
*
If a timeout is specified and the timeout elapses before the operation
* completes then the operation completes with the exception {@link
* java.nio.channels.InterruptedByTimeoutException}. Where a timeout occurs, and the
* implementation cannot guarantee that bytes have not been read, or will not
* be read from the channel into the given buffer, then further attempts to
* read from the channel will cause an unspecific runtime exception to be
* thrown.
*
*
Otherwise this method works in the same manner as the {@link
* AsynchronousByteChannel#read(ByteBuffer, Object, CompletionHandler)}
* method.
*
* @param dst The buffer into which bytes are to be transferred
* @param timeout The maximum time for the I/O operation to complete
* @param unit The time unit of the {@code timeout} argument
* @param attach The object to attach to the I/O operation; can be {@code null}
* @param handler The handler for consuming the result
* @throws IllegalArgumentException If the buffer is read-only
* @throws ReadPendingException If a read operation is already in progress on this channel
* @throws ShutdownChannelGroupException If the channel group has terminated
*/
void read(
ByteBuffer dst,
long timeout, TimeUnit unit,
A attach, CompletionHandler handler);
/**
* Reads a sequence of bytes from this channel into a subsequence of the
* given buffers. This operation, sometimes called a scattering read,
* is often useful when implementing network protocols that group data into
* segments consisting of one or more fixed-length headers followed by a
* variable-length body. The {@code handler} parameter is a completion
* handler that is invoked when the read operation completes (or fails). The
* result passed to the completion handler is the number of bytes read or
* {@code -1} if no bytes could be read because the channel has reached
* end-of-stream.
*
* This method initiates a read of up to r bytes from this channel,
* where r is the total number of bytes remaining in the specified
* subsequence of the given buffer array, that is,
*
*
* dsts[offset].remaining()
* + dsts[offset+1].remaining()
* + ... + dsts[offset+length-1].remaining()
*
* at the moment that the read is attempted.
*
*
Suppose that a byte sequence of length n is read, where
* 0 < n <= r.
* Up to the first dsts[offset].remaining() bytes of this sequence
* are transferred into buffer dsts[offset], up to the next
* dsts[offset+1].remaining() bytes are transferred into buffer
* dsts[offset+1], and so forth, until the entire byte sequence
* is transferred into the given buffers. As many bytes as possible are
* transferred into each buffer, hence the final position of each updated
* buffer, except the last updated buffer, is guaranteed to be equal to
* that buffer's limit. The underlying operating system may impose a limit
* on the number of buffers that may be used in an I/O operation. Where the
* number of buffers (with bytes remaining), exceeds this limit, then the
* I/O operation is performed with the maximum number of buffers allowed by
* the operating system.
*
*
If a timeout is specified and the timeout elapses before the operation
* completes then it completes with the exception {@link
* java.nio.channels.InterruptedByTimeoutException}. Where a timeout occurs, and the
* implementation cannot guarantee that bytes have not been read, or will not
* be read from the channel into the given buffers, then further attempts to
* read from the channel will cause an unspecific runtime exception to be
* thrown.
*
* @param dsts The buffers into which bytes are to be transferred
* @param offset The offset within the buffer array of the first buffer into which
* bytes are to be transferred; must be non-negative and no larger than
* {@code dsts.length}
* @param length The maximum number of buffers to be accessed; must be non-negative
* and no larger than {@code dsts.length - offset}
* @param timeout The maximum time for the I/O operation to complete
* @param unit The time unit of the {@code timeout} argument
* @param attach The object to attach to the I/O operation; can be {@code null}
* @param handler The handler for consuming the result
* @throws IndexOutOfBoundsException If the pre-conditions for the {@code offset} and {@code length}
* parameter aren't met
* @throws IllegalArgumentException If the buffer is read-only
* @throws ReadPendingException If a read operation is already in progress on this channel
* @throws ShutdownChannelGroupException If the channel group has terminated
*/
void read(
ByteBuffer[] dsts, int offset, int length,
long timeout, TimeUnit unit,
A attach, CompletionHandler handler);
/**
* Writes a sequence of bytes to this channel from the given buffer.
*
* This method initiates an asynchronous write operation to write a
* sequence of bytes to this channel from the given buffer. The {@code
* handler} parameter is a completion handler that is invoked when the write
* operation completes (or fails). The result passed to the completion
* handler is the number of bytes written.
*
*
If a timeout is specified and the timeout elapses before the operation
* completes then it completes with the exception {@link
* java.nio.channels.InterruptedByTimeoutException}. Where a timeout occurs, and the
* implementation cannot guarantee that bytes have not been written, or will
* not be written to the channel from the given buffer, then further attempts
* to write to the channel will cause an unspecific runtime exception to be
* thrown.
*
*
Otherwise this method works in the same manner as the {@link
* AsynchronousByteChannel#write(ByteBuffer, Object, CompletionHandler)}
* method.
*
* @param src The buffer from which bytes are to be retrieved
* @param timeout The maximum time for the I/O operation to complete
* @param unit The time unit of the {@code timeout} argument
* @param attach The object to attach to the I/O operation; can be {@code null}
* @param handler The handler for consuming the result
* @throws WritePendingException If a write operation is already in progress on this channel
* @throws ShutdownChannelGroupException If the channel group has terminated
*/
void write(
ByteBuffer src,
long timeout, TimeUnit unit,
A attach, CompletionHandler handler);
/**
* Writes a sequence of bytes to this channel from a subsequence of the given
* buffers. This operation, sometimes called a gathering write, is
* often useful when implementing network protocols that group data into
* segments consisting of one or more fixed-length headers followed by a
* variable-length body. The {@code handler} parameter is a completion
* handler that is invoked when the write operation completes (or fails).
* The result passed to the completion handler is the number of bytes written.
*
* This method initiates a write of up to r bytes to this channel,
* where r is the total number of bytes remaining in the specified
* subsequence of the given buffer array, that is,
*
*
* srcs[offset].remaining()
* + srcs[offset+1].remaining()
* + ... + srcs[offset+length-1].remaining()
*
* at the moment that the write is attempted.
*
*
Suppose that a byte sequence of length n is written, where
* 0 < n <= r.
* Up to the first srcs[offset].remaining() bytes of this sequence
* are written from buffer srcs[offset], up to the next
* srcs[offset+1].remaining() bytes are written from buffer
* srcs[offset+1], and so forth, until the entire byte sequence is
* written. As many bytes as possible are written from each buffer, hence
* the final position of each updated buffer, except the last updated
* buffer, is guaranteed to be equal to that buffer's limit. The underlying
* operating system may impose a limit on the number of buffers that may be
* used in an I/O operation. Where the number of buffers (with bytes
* remaining), exceeds this limit, then the I/O operation is performed with
* the maximum number of buffers allowed by the operating system.
*
*
If a timeout is specified and the timeout elapses before the operation
* completes then it completes with the exception {@link
* java.nio.channels.InterruptedByTimeoutException}. Where a timeout occurs, and the
* implementation cannot guarantee that bytes have not been written, or will
* not be written to the channel from the given buffers, then further attempts
* to write to the channel will cause an unspecific runtime exception to be
* thrown.
*
* @param srcs The buffers from which bytes are to be retrieved
* @param offset The offset within the buffer array of the first buffer from which
* bytes are to be retrieved; must be non-negative and no larger
* than {@code srcs.length}
* @param length The maximum number of buffers to be accessed; must be non-negative
* and no larger than {@code srcs.length - offset}
* @param timeout The maximum time for the I/O operation to complete
* @param unit The time unit of the {@code timeout} argument
* @param attach The object to attach to the I/O operation; can be {@code null}
* @param handler The handler for consuming the result
* @throws IndexOutOfBoundsException If the pre-conditions for the {@code offset} and {@code length}
* parameter aren't met
* @throws WritePendingException If a write operation is already in progress on this channel
* @throws ShutdownChannelGroupException If the channel group has terminated
*/
void write(
ByteBuffer[] srcs, int offset, int length,
long timeout, TimeUnit unit,
A attach, CompletionHandler handler);
}