org.bson.ByteBuf Maven / Gradle / Ivy
Show all versions of mongo-java-driver Show documentation
/*
* Copyright 2008-present MongoDB, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.bson;
import java.nio.ByteBuffer;
import java.nio.ByteOrder;
/**
* An interface wrapper around a {@code java.nio.ByteBuffer} which additionally is {@code Closeable}, so that pooled byte buffers know
* how.
*
* This interface is not frozen yet, and methods may be added in a minor release, so beware implementing this yourself.
*
* @since 3.0
*/
public interface ByteBuf {
/**
* Returns this buffer's capacity.
*
* @return The capacity of this buffer
*/
int capacity();
/**
* Absolute put method (optional operation).
*
* Writes the given byte into this buffer at the given index.
*
* @param index The index at which the byte will be written
* @param b The byte value to be written
* @return This buffer
* @throws IndexOutOfBoundsException If {@code index} is negative or not smaller than the buffer's limit
* @throws java.nio.ReadOnlyBufferException If this buffer is read-only
*/
ByteBuf put(int index, byte b);
/**
* Returns the number of elements between the current position and the limit.
*
* @return The number of elements remaining in this buffer
*/
int remaining();
/**
* Relative bulk put method (optional operation).
*
* This method transfers bytes into this buffer from the given source array. If there are more bytes to be copied from the array
* than remain in this buffer, that is, if {@code length > remaining()}, then no bytes are transferred and a {@link
* java.nio.BufferOverflowException} is thrown.
*
* Otherwise, this method copies {@code length} bytes from the given array into this buffer, starting at the given offset in the
* array and at the current position of this buffer. The position of this buffer is then incremented by {@code length}.
*
* In other words, an invocation of this method of the form {@code dst.put(src, off, len)} has exactly the same effect as the
* loop
* {@code
* for (int i = off; i < off + len; i++) {
* dst.put(a[i]);
* }}
*
*
* except that it first checks that there is sufficient space in this buffer and it is potentially much more efficient.
*
* @param src The array from which bytes are to be read
* @param offset The offset within the array of the first byte to be read; must be non-negative and no larger than {@code array.length}
* @param length The number of bytes to be read from the given array; must be non-negative and no larger than {@code array.length -
* offset}
* @return This buffer
* @throws java.nio.BufferOverflowException If there is insufficient space in this buffer
* @throws IndexOutOfBoundsException If the preconditions on the {@code offset} and {@code length} parameters do not hold
* @throws java.nio.ReadOnlyBufferException If this buffer is read-only
*/
ByteBuf put(byte[] src, int offset, int length);
/**
* States whether there are any elements between the current position and the limit.
*
* @return {@code true} if, and only if, there is at least one element remaining in this buffer
*/
boolean hasRemaining();
/**
* Relative put method (optional operation).
*
* Writes the given byte into this buffer at the current position, and then increments the position.
*
* @param b The byte to be written
* @return This buffer
* @throws java.nio.BufferOverflowException If this buffer's current position is not smaller than its limit
* @throws java.nio.ReadOnlyBufferException If this buffer is read-only
*/
ByteBuf put(byte b);
/**
* Flips this buffer. The limit is set to the current position and then the position is set to zero. If the mark is defined then it
* is discarded.
*
* After a sequence of channel-read or put operations, invoke this method to prepare for a sequence of channel-write or
* relative get operations. For example:
*
* buf.put(magic); // Prepend header
* in.read(buf); // Read data into rest of buffer
* buf.flip(); // Flip buffer
* out.write(buf); // Write header + data to channel
*
* This method is often used in conjunction with the {@link java.nio.ByteBuffer#compact compact} method when transferring data from
* one place to another.
*
* @return This buffer
*/
ByteBuf flip();
/**
* Returns the byte array that backs this buffer (optional operation).
*
* Modifications to this buffer's content will cause the returned array's content to be modified, and vice versa.
*
* @return The array that backs this buffer
* @throws java.nio.ReadOnlyBufferException If this buffer is backed by an array but is read-only
* @throws UnsupportedOperationException If this buffer is not backed by an accessible array
*/
byte[] array();
/**
* Returns this buffer's limit.
*
* @return The limit of this buffer
*/
int limit();
/**
* Sets this buffer's position. If the mark is defined and larger than the new position then it is discarded.
*
* @param newPosition The new position value; must be non-negative and no larger than the current limit
* @return This buffer
* @throws IllegalArgumentException If the preconditions on {@code newPosition} do not hold
*/
ByteBuf position(int newPosition);
/**
* Clears this buffer. The position is set to zero, the limit is set to the capacity, and the mark is discarded.
*
* Invoke this method before using a sequence of channel-read or put operations to fill this buffer. For example:
*
*
* buf.clear(); // Prepare buffer for reading
* in.read(buf); // Read data
*
* This method does not actually erase the data in the buffer, but it is named as if it did because it will most often be used in
* situations in which that might as well be the case.
*
* @return This buffer
*/
ByteBuf clear();
/**
* Modifies this buffer's byte order.
*
* @param byteOrder The new byte order, either {@link ByteOrder#BIG_ENDIAN BIG_ENDIAN} or {@link ByteOrder#LITTLE_ENDIAN LITTLE_ENDIAN}
* @return This buffer
*/
ByteBuf order(ByteOrder byteOrder);
/**
* Relative get method. Reads the byte at this buffer's current position, and then increments the position.
*
* @return The byte at the buffer's current position
* @throws java.nio.BufferUnderflowException If the buffer's current position is not smaller than its limit
*/
byte get();
/**
* Absolute get method. Reads the byte at the given index.
*
* @param index The index from which the byte will be read
* @return The byte at the given index
* @throws IndexOutOfBoundsException If {@code index} is negative or not smaller than the buffer's limit
*/
byte get(int index);
/**
* Relative bulk {@code get} method.
*
* This method transfers bytes from this buffer into the given destination array. An invocation of this method of the form {@code
* src.get(a)} behaves in exactly the same way as the invocation:
*
*
* src.get(a, 0, a.length)
*
*
* @param bytes the destination byte array
* @return This buffer
* @throws java.nio.BufferUnderflowException If there are fewer than {@code length} bytes remaining in this buffer
*/
ByteBuf get(byte[] bytes);
/**
* Absolute bulk {@code get} method.
*
* This method transfers bytes from this buffer into the given destination array. An invocation of this method of the form {@code
* src.get(a)} behaves in exactly the same way as the invocation:
*
*
* src.get(index, a, 0, a.length)
*
*
* @param index The index from which the bytes will be read
* @param bytes the destination byte array
* @return This buffer
* @throws java.nio.BufferUnderflowException If there are fewer than {@code length} bytes remaining in this buffer
*/
ByteBuf get(int index, byte[] bytes);
/**
* Relative bulk get method.
*
* This method transfers bytes from this buffer into the given
* destination array. If there are fewer bytes remaining in the
* buffer than are required to satisfy the request, that is, if
* length > remaining()
, then no
* bytes are transferred and a {@link java.nio.BufferUnderflowException} is
* thrown.
*
*
Otherwise, this method copies {@code length} bytes from this
* buffer into the given array, starting at the current position of this
* buffer and at the given offset in the array. The position of this
* buffer is then incremented by {@code length}.
*
*
In other words, an invocation of this method of the form
* src.get(dst, off, len)
* has exactly the same effect as the loop
*
*
* {@code
* for (int i = off; i < off + len; i++)
* dst[i] = src.get();
* }
*
*
* except that it first checks that there are sufficient bytes in
* this buffer and it is potentially much more efficient.
*
* @param bytes
* The array into which bytes are to be written
*
* @param offset
* The offset within the array of the first byte to be
* written; must be non-negative and no larger than
* {@code dst.length}
*
* @param length
* The maximum number of bytes to be written to the given
* array; must be non-negative and no larger than
* {@code dst.length - offset}
*
* @return This buffer
*
* @throws java.nio.BufferUnderflowException
* If there are fewer than {@code length} bytes
* remaining in this buffer
*
* @throws IndexOutOfBoundsException
* If the preconditions on the {@code offset} and {@code length}
* parameters do not hold
*/
ByteBuf get(byte[] bytes, int offset, int length);
/**
* Absolute bulk get method.
*
* This method transfers bytes from this buffer into the given destination array. If there are fewer bytes remaining in the buffer
* than are required to satisfy the request, that is, if {@code length > remaining}, then no bytes are
* transferred and a {@link java.nio.BufferUnderflowException} is thrown.
*
* Otherwise, this method copies {@code length} bytes from this buffer into the given array, starting at the given index buffer
* and at the given offset in the array.
*
* In other words, an invocation of this method of the form {@code src.get(dst, off, len)} has exactly the same
* effect as the loop
*
* {@code
* for (int i = off; i < off + len; i++)
* dst[i] = src.get(i);
* }
*
*
* except that it first checks that there are sufficient bytes in this buffer and it is potentially much more efficient.
*
* @param index The index from which the bytes will be read
* @param bytes The array into which bytes are to be written
* @param offset The offset within the array of the first byte to be written; must be non-negative and no larger than
* {@code dst.length}
* @param length The maximum number of bytes to be written to the given array; must be non-negative and no larger than
* {@code dst.length - offset}
* @return This buffer
* @throws java.nio.BufferUnderflowException If there are fewer than {@code length} bytes remaining in this buffer
* @throws IndexOutOfBoundsException If the preconditions on the {@code offset} and {@code length} parameters do not hold
*/
ByteBuf get(int index, byte[] bytes, int offset, int length);
/**
* Relative get method for reading a long value.
Reads the next eight bytes at this buffer's current position,
* composing them into a long value according to the current byte order, and then increments the position by eight.
*
* @return The long value at the buffer's current position
* @throws java.nio.BufferUnderflowException If there are fewer than eight bytes remaining in this buffer
*/
long getLong();
/**
* Absolute get method for reading a long value.
*
* Reads eight bytes at the given index, composing them into a long value according to the current byte order.
*
* @param index The index from which the bytes will be read
*
* @return The long value at the given index
*
* @throws IndexOutOfBoundsException If {@code index} is negative or not smaller than the buffer's limit, minus seven
*/
long getLong(int index);
/**
* Relative get method for reading a double value.
*
* Reads the next eight bytes at this buffer's current position, composing them into a double value according to the current byte
* order, and then increments the position by eight.
*
* @return The double value at the buffer's current position
* @throws java.nio.BufferUnderflowException If there are fewer than eight bytes remaining in this buffer
*/
double getDouble();
/**
* Absolute get method for reading a double value.
*
* Reads eight bytes at the given index, composing them into a double value
* according to the current byte order.
*
* @param index The index from which the bytes will be read
* @return The double value at the given index
* @throws IndexOutOfBoundsException If {@code index} is negative or not smaller than the buffer's limit, minus seven
*/
double getDouble(int index);
/**
* Relative get method for reading an int value.
*
* Reads the next four bytes at this buffer's current position, composing them into an int value according to the current byte order,
* and then increments the position by four.
*
* @return The int value at the buffer's current position
* @throws java.nio.BufferUnderflowException If there are fewer than four bytes remaining in this buffer
*/
int getInt();
/**
* Absolute get method for reading an int value. Reads four bytes at the given index, composing them into a int value
* according to the current byte order.
*
* @param index The index from which the bytes will be read
* @return The int value at the given index
* @throws IndexOutOfBoundsException If {@code index} is negative or not smaller than the buffer's limit, minus three
*/
int getInt(int index);
/**
* Returns this buffer's position.
*
* @return The position of this buffer
*/
int position();
/**
* Sets this buffer's limit. If the position is larger than the new limit then it is set to the new limit. If the mark is defined and
* larger than the new limit then it is discarded.
*
* @param newLimit The new limit value; must be non-negative and no larger than this buffer's capacity
* @return This buffer
* @throws IllegalArgumentException If the preconditions on {@code newLimit} do not hold
*/
ByteBuf limit(int newLimit);
/**
* Creates a new, read-only byte buffer that shares this buffer's content.
*
* The content of the new buffer will be that of this buffer. Changes to this buffer's content will be visible in the new buffer;
* the new buffer itself, however, will be read-only and will not allow the shared content to be modified. The two buffers' position,
* limit, and mark values will be independent.
*
* The new buffer's capacity, limit, position, and mark values will be identical to those of this buffer.
*
* @return The new, read-only byte buffer
*/
ByteBuf asReadOnly();
/**
* Creates a new byte buffer that shares this buffer's content.
*
* The content of the new buffer will be that of this buffer. Changes to this buffer's content will be visible in the new buffer,
* and vice versa; the two buffers' position, limit, and mark values will be independent.
*
* The new buffer's capacity, limit, position, and mark values will be identical to those of this buffer. The new buffer will be
* direct if, and only if, this buffer is direct, and it will be read-only if, and only if, this buffer is read-only.
*
* @return The new byte buffer
*/
ByteBuf duplicate();
/**
* Gets the underlying NIO {@code ByteBuffer}. Changes made directly to the returned buffer will be reflected in this instance, and
* vice versa, so be careful. This method should really only be used so that the underlying buffer can be passed directly to a socket
* channel.
*
* @return the underlying ByteBuffer
*/
ByteBuffer asNIO();
/**
* Gets the current reference count, which starts at 0.
*
* @return the current count, which must be greater than or equal to 0
*/
int getReferenceCount();
/**
* Retain an additional reference to this object. All retained references must be released, or there will be a leak.
*
* @return this
*/
ByteBuf retain();
/**
* Release a reference to this object.
* @throws java.lang.IllegalStateException if the reference count is already 0
*/
void release();
}