package.options.variwide.d.ts Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of highcharts Show documentation
Show all versions of highcharts Show documentation
JavaScript charting framework
The newest version!
/*!*
*
* Copyright (c) Highsoft AS. All rights reserved.
*
*!*/
import * as Highcharts from "../highcharts";
declare module "../highcharts" {
/**
* (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the initial
* animation when a series is displayed for the `dataLabels`. The animation
* can also be set as a configuration object. Please note that this option
* only applies to the initial animation.
*
* For other animations, see chart.animation and the animation parameter
* under the API methods. The following properties are supported:
*
* - `defer`: The animation delay time in milliseconds.
*/
interface PlotVariwideDataLabelsAnimationOptions {
/**
* (Highcharts, Highstock, Highmaps, Gantt) The animation delay time in
* milliseconds. Set to `0` to render the data labels immediately. As
* `undefined` inherits defer time from the series.animation.defer.
*/
defer?: number;
}
/**
* (Highcharts, Highstock) Options for the series data sorting.
*/
interface PlotVariwideDataSortingOptions {
/**
* (Highcharts, Highstock) Enable or disable data sorting for the
* series. Use xAxis.reversed to change the sorting order.
*/
enabled?: boolean;
/**
* (Highcharts, Highstock) Whether to allow matching points by name in
* an update. If this option is disabled, points will be matched by
* order.
*/
matchByName?: boolean;
/**
* (Highcharts, Highstock) Determines what data value should be used to
* sort by.
*/
sortKey?: string;
}
/**
* (Highcharts) Options for the _Series on point_ feature. Only `pie` and
* `sunburst` series are supported at this moment.
*/
interface PlotVariwideOnPointOptions {
/**
* (Highcharts) Options for the connector in the _Series on point_
* feature.
*
* In styled mode, the connector can be styled with the
* `.highcharts-connector-seriesonpoint` class name.
*/
connectorOptions?: (Highcharts.PlotVariwideOnPointConnectorOptions|Highcharts.SVGAttributes);
/**
* (Highcharts) The `id` of the point that we connect the series to.
* Only points with a given `plotX` and `plotY` values and map points
* are valid.
*/
id?: string;
/**
* (Highcharts) Options allowing to set a position and an offset of the
* series in the _Series on point_ feature.
*/
position?: (object|Highcharts.PlotVariwideOnPointPositionOptions);
}
/**
* (Highcharts) A variwide chart (related to marimekko chart) is a column
* chart with a variable width expressing a third dimension.
*
* Configuration options for the series are given in three levels:
*
* 1. Options for all series in a chart are defined in the
* plotOptions.series object.
*
* 2. Options for all `variwide` series are defined in plotOptions.variwide.
*
* 3. Options for one single series are given in the series instance array.
* (see online documentation for example)
*
* **TypeScript:**
*
* - the type option must always be set.
*
* - when accessing an array of series, the combined set of all series types
* is represented by Highcharts.SeriesOptionsType . Narrowing down to the
* specific type can be done by checking the `type` property. (see online
* documentation for example)
*/
interface PlotVariwideOptions {
/**
* (Highcharts) Accessibility options for a series.
*/
accessibility?: Highcharts.SeriesAccessibilityOptionsObject;
/**
* (Highcharts) Allow this series' points to be selected by clicking on
* the graphic (columns, point markers, pie slices, map areas etc).
*
* The selected points can be handled by point select and unselect
* events, or collectively by the getSelectedPoints function.
*
* And alternative way of selecting points is through dragging.
*/
allowPointSelect?: boolean;
/**
* (Highcharts) Enable or disable the initial animation when a series is
* displayed. The animation can also be set as a configuration object.
* Please note that this option only applies to the initial animation of
* the series itself. For other animations, see chart.animation and the
* animation parameter under the API methods. The following properties
* are supported:
*
* - `defer`: The animation delay time in milliseconds.
*
* - `duration`: The duration of the animation in milliseconds.
* (Defaults to `1000`)
*
* - `easing`: Can be a string reference to an easing function set on
* the `Math` object or a function. See the _Custom easing function_
* demo below. (Defaults to `easeInOutSine`)
*
* Due to poor performance, animation is disabled in old IE browsers for
* several chart types.
*/
animation?: (boolean|Highcharts.AnimationOptionsObject);
/**
* (Highcharts) For some series, there is a limit that shuts down
* animation by default when the total number of points in the chart is
* too high. For example, for a column chart and its derivatives,
* animation does not run if there is more than 250 points totally. To
* disable this cap, set `animationLimit` to `Infinity`. This option
* works if animation is fired on individual points, not on a group of
* points like e.g. during the initial animation.
*/
animationLimit?: number;
/**
* (Highcharts, Highstock, Gantt) The color of the border surrounding
* each column or bar.
*
* In styled mode, the border stroke can be set with the
* `.highcharts-point` rule.
*/
borderColor?: (Highcharts.ColorString|Highcharts.GradientColorObject|Highcharts.PatternObject);
/**
* (Highcharts, Highstock, Gantt) The corner radius of the border
* surrounding each column or bar. A number signifies pixels. A
* percentage string, like for example `50%`, signifies a relative size.
* For columns this is relative to the column width, for pies it is
* relative to the radius and the inner radius.
*/
borderRadius?: (number|string|Highcharts.BorderRadiusOptionsObject);
/**
* (Highcharts, Highstock, Gantt) The width of the border surrounding
* each column or bar. Defaults to `1` when there is room for a border,
* but to `0` when the columns are so dense that a border would cover
* the next column.
*
* In styled mode, the stroke width can be set with the
* `.highcharts-point` rule.
*/
borderWidth?: number;
/**
* (Highcharts, Highstock, Gantt) When `true`, the columns will center
* in the category, ignoring null or missing points. When `false`, space
* will be reserved for null or missing points.
*/
centerInCategory?: boolean;
/**
* (Highcharts) An additional class name to apply to the series'
* graphical elements. This option does not replace default class names
* of the graphical element. Changes to the series' color will also be
* reflected in a chart's legend and tooltip.
*/
className?: string;
/**
* (Highcharts) Disable this option to allow series rendering in the
* whole plotting area.
*
* **Note:** Clipping should be always enabled when chart.zoomType is
* set
*/
clip?: boolean;
/**
* (Highcharts) The main color of the series. In line type series it
* applies to the line and the point markers unless otherwise specified.
* In bar type series it applies to the bars unless a color is specified
* per point. The default value is pulled from the `options.colors`
* array.
*
* In styled mode, the color can be defined by the colorIndex option.
* Also, the series color can be set with the `.highcharts-series`,
* `.highcharts-color-{n}`, `.highcharts-{type}-series` or
* `.highcharts-series-{n}` class, or individual classes given by the
* `className` option.
*/
color?: (Highcharts.ColorString|Highcharts.GradientColorObject|Highcharts.PatternObject);
/**
* (Highcharts, Highstock, Highmaps) When using dual or multiple color
* axes, this number defines which colorAxis the particular series is
* connected to. It refers to either the axis id or the index of the
* axis in the colorAxis array, with 0 being the first. Set this option
* to false to prevent a series from connecting to the default color
* axis.
*
* Since v7.2.0 the option can also be an axis id or an axis index
* instead of a boolean flag.
*/
colorAxis?: (boolean|number|string);
/**
* (Highcharts, Highstock, Gantt) When using automatic point colors
* pulled from the global colors or series-specific
* plotOptions.column.colors collections, this option determines whether
* the chart should receive one color per series or one color per point.
*
* In styled mode, the `colors` or `series.colors` arrays are not
* supported, and instead this option gives the points individual color
* class names on the form `highcharts-color-{n}`.
*/
colorByPoint?: boolean;
/**
* (Highcharts) Styled mode only. A specific color index to use for the
* series, so its graphic representations are given the class name
* `highcharts-color-{n}`.
*
* Since v11, CSS variables on the form `--highcharts-color-{n}` make
* changing the color scheme very convenient.
*/
colorIndex?: number;
/**
* (Highcharts, Highstock, Highmaps) Determines what data value should
* be used to calculate point color if `colorAxis` is used. Requires to
* set `min` and `max` if some custom point property is used or if
* approximation for data grouping is set to `'sum'`.
*/
colorKey?: string;
/**
* (Highcharts, Highstock, Gantt) A series specific or series type
* specific color set to apply instead of the global colors when
* colorByPoint is true.
*/
colors?: Array<(Highcharts.ColorString|Highcharts.GradientColorObject|Highcharts.PatternObject)>;
/**
* (Highcharts, Highstock, Gantt) When the series contains less points
* than the crop threshold, all points are drawn, event if the points
* fall outside the visible plot area at the current zoom. The advantage
* of drawing all points (including markers and columns), is that
* animation is performed on updates. On the other hand, when the series
* contains more points than the crop threshold, the series data is
* cropped to only contain points that fall within the plot area. The
* advantage of cropping away invisible points is to increase
* performance on large series.
*/
cropThreshold?: number;
/**
* (Highcharts) You can set the cursor to "pointer" if you have click
* events attached to the series, to signal to the user that the points
* and lines can be clicked.
*
* In styled mode, the series cursor can be set with the same classes as
* listed under series.color.
*/
cursor?: (string|Highcharts.CursorValue);
/**
* (Highcharts) A reserved subspace to store options and values for
* customized functionality. Here you can add additional data for your
* own event callbacks and formatter callbacks.
*/
custom?: Highcharts.Dictionary;
/**
* (Highcharts) Name of the dash style to use for the graph, or for some
* series types the outline of each shape.
*
* In styled mode, the stroke dash-array can be set with the same
* classes as listed under series.color.
*/
dashStyle?: Highcharts.DashStyleValue;
/**
* (Highcharts, Highstock, Highmaps, Gantt) Options for the series data
* labels, appearing next to each data point.
*
* Since v6.2.0, multiple data labels can be applied to each single
* point by defining them as an array of configs.
*
* In styled mode, the data labels can be styled with the
* `.highcharts-data-label-box` and `.highcharts-data-label` class names
* (see example).
*/
dataLabels?: (Highcharts.PlotVariwideDataLabelsOptions|Array);
/**
* (Highcharts, Highstock) Options for the series data sorting.
*/
dataSorting?: (Highcharts.DataSortingOptionsObject|Highcharts.PlotVariwideDataSortingOptions);
/**
* (Highcharts) A description of the series to add to the screen reader
* information about the series.
*/
description?: string;
/**
* (Highcharts) The draggable-points module allows points to be moved
* around or modified in the chart. In addition to the options mentioned
* under the `dragDrop` API structure, the module fires three events,
* point.dragStart, point.drag and point.drop.
*/
dragDrop?: Highcharts.SeriesDragDropOptionsObject;
/**
* (Highcharts) Enable or disable the mouse tracking for a specific
* series. This includes point tooltips and click events on graphs and
* points. For large datasets it improves performance.
*/
enableMouseTracking?: boolean;
/**
* (Highcharts) General event handlers for the series items. These event
* hooks can also be attached to the series at run time using the
* `Highcharts.addEvent` function.
*/
events?: Highcharts.SeriesEventsOptionsObject;
/**
* (Highcharts) Determines whether the series should look for the
* nearest point in both dimensions or just the x-dimension when
* hovering the series. Defaults to `'xy'` for scatter series and `'x'`
* for most other series. If the data has duplicate x-values, it is
* recommended to set this to `'xy'` to allow hovering over all points.
*
* Applies only to series types using nearest neighbor search (not
* direct hover) for tooltip.
*/
findNearestPointBy?: Highcharts.OptionsFindNearestPointByValue;
/**
* (Highcharts, Highstock, Gantt) Whether to use the Y extremes of the
* total chart width or only the zoomed area when zooming in on parts of
* the X axis. By default, the Y axis adjusts to the min and max of the
* visible data. Cartesian series only.
*/
getExtremesFromAll?: boolean;
/**
* (Highcharts, Highstock, Gantt) Whether to group non-stacked columns
* or to let them render independent of each other. Non-grouped columns
* will be laid out individually and overlap each other.
*/
grouping?: boolean;
/**
* (Highcharts, Highstock, Gantt) In a variwide chart, the group padding
* is 0 in order to express the horizontal stacking of items.
*/
groupPadding?: number;
/**
* (Highcharts) Highlight only the hovered point and fade the remaining
* points.
*
* Scatter-type series require enabling the 'inactive' marker state and
* adjusting opacity. Note that this approach could affect performance
* with large datasets.
*/
inactiveOtherPoints?: boolean;
/**
* (Highcharts) When set to `false` will prevent the series data from
* being included in any form of data export.
*
* Since version 6.0.0 until 7.1.0 the option was existing undocumented
* as `includeInCSVExport`.
*/
includeInDataExport?: boolean;
/**
* (Highcharts) An array specifying which option maps to which key in
* the data point array. This makes it convenient to work with
* unstructured data arrays from different sources.
*/
keys?: Array;
/**
* (Highcharts, Highstock, Gantt) Series labels are placed as close to
* the series as possible in a natural way, seeking to avoid other
* series. The goal of this feature is to make the chart more easily
* readable, like if a human designer placed the labels in the optimal
* position.
*
* The series labels currently work with series types having a `graph`
* or an `area`.
*/
label?: Highcharts.SeriesLabelOptionsObject;
/**
* (Highcharts) What type of legend symbol to render for this series.
* Can be one of `areaMarker`, `lineMarker` or `rectangle`.
*/
legendSymbol?: Highcharts.OptionsLegendSymbolValue;
/**
* (Highcharts, Highstock, Gantt) The id of another series to link to.
* Additionally, the value can be ":previous" to link to the previous
* series. When two series are linked, only the first one appears in the
* legend. Toggling the visibility of this also toggles the linked
* series.
*
* If master series uses data sorting and linked series does not have
* its own sorting definition, the linked series will be sorted in the
* same order as the master one.
*/
linkedTo?: string;
/**
* (Highcharts, Highstock, Gantt) The maximum allowed pixel width for a
* column, translated to the height of a bar in a bar chart. This
* prevents the columns from becoming too wide when there is a small
* number of points in the chart.
*/
maxPointWidth?: number;
/**
* (Highcharts, Highstock, Gantt) The minimal height for a column or
* width for a bar. By default, 0 values are not shown. To visualize a 0
* (or close to zero) point, set the minimal point length to a pixel
* value like 3\. In stacked column charts, minPointLength might not be
* respected for tightly packed values.
*/
minPointLength?: number;
/**
* (Highcharts) The color for the parts of the graph or points that are
* below the threshold. Note that `zones` takes precedence over the
* negative color. Using `negativeColor` is equivalent to applying a
* zone with value of 0.
*/
negativeColor?: (Highcharts.ColorString|Highcharts.GradientColorObject|Highcharts.PatternObject);
/**
* (Highcharts) Options for the _Series on point_ feature. Only `pie`
* and `sunburst` series are supported at this moment.
*/
onPoint?: (object|Highcharts.PlotVariwideOnPointOptions);
/**
* (Highcharts) Opacity of a series parts: line, fill (e.g. area) and
* dataLabels.
*/
opacity?: number;
/**
* (Highcharts) Properties for each single point.
*/
point?: Highcharts.PlotSeriesPointOptions;
/**
* (Highcharts) Same as accessibility.point.descriptionFormat, but for
* an individual series. Overrides the chart wide configuration.
*/
pointDescriptionFormat?: Function;
/**
* (Highcharts) Same as accessibility.series.descriptionFormatter, but
* for an individual series. Overrides the chart wide configuration.
*/
pointDescriptionFormatter?: Function;
/**
* (Highcharts, Highstock, Gantt) If no x values are given for the
* points in a series, `pointInterval` defines the interval of the x
* values. For example, if a series contains one value every decade
* starting from year 0, set `pointInterval` to `10`. In true `datetime`
* axes, the `pointInterval` is set in milliseconds.
*
* It can be also be combined with `pointIntervalUnit` to draw irregular
* time intervals.
*
* If combined with `relativeXValue`, an x value can be set on each
* point, and the `pointInterval` is added x times to the `pointStart`
* setting.
*
* Please note that this options applies to the _series data_, not the
* interval of the axis ticks, which is independent.
*/
pointInterval?: number;
/**
* (Highcharts, Highstock, Gantt) On datetime series, this allows for
* setting the pointInterval to irregular time units, `day`, `month` and
* `year`. A day is usually the same as 24 hours, but
* `pointIntervalUnit` also takes the DST crossover into consideration
* when dealing with local time. Combine this option with
* `pointInterval` to draw weeks, quarters, 6 months, 10 years etc.
*
* Please note that this options applies to the _series data_, not the
* interval of the axis ticks, which is independent.
*/
pointIntervalUnit?: Highcharts.OptionsPointIntervalUnitValue;
/**
* (Highcharts, Highstock, Gantt) In a variwide chart, the point padding
* is 0 in order to express the horizontal stacking of items.
*/
pointPadding?: number;
/**
* (Highcharts, Highstock, Gantt) Possible values: `"on"`, `"between"`,
* `number`.
*
* In a column chart, when pointPlacement is `"on"`, the point will not
* create any padding of the X axis. In a polar column chart this means
* that the first column points directly north. If the pointPlacement is
* `"between"`, the columns will be laid out between ticks. This is
* useful for example for visualising an amount between two points in
* time or in a certain sector of a polar chart.
*
* Since Highcharts 3.0.2, the point placement can also be numeric,
* where 0 is on the axis value, -0.5 is between this value and the
* previous, and 0.5 is between this value and the next. Unlike the
* textual options, numeric point placement options won't affect axis
* padding.
*
* Note that pointPlacement needs a pointRange to work. For column
* series this is computed, but for line-type series it needs to be set.
*
* For the `xrange` series type and gantt charts, if the Y axis is a
* category axis, the `pointPlacement` applies to the Y axis rather than
* the (typically datetime) X axis.
*
* Defaults to `undefined` in cartesian charts, `"between"` in polar
* charts.
*/
pointPlacement?: (number|string);
/**
* (Highcharts, Highstock, Gantt) The X axis range that each point is
* valid for. This determines the width of the column. On a categorized
* axis, the range will be 1 by default (one category unit). On linear
* and datetime axes, the range will be computed as the distance between
* the two closest data points.
*
* The default `null` means it is computed automatically, but this
* option can be used to override the automatic value.
*
* This option is set by default to 1 if data sorting is enabled.
*/
pointRange?: (number|null);
/**
* (Highcharts, Highstock, Gantt) If no x values are given for the
* points in a series, pointStart defines on what value to start. For
* example, if a series contains one yearly value starting from 1945,
* set pointStart to 1945.
*
* If combined with `relativeXValue`, an x value can be set on each
* point. The x value from the point options is multiplied by
* `pointInterval` and added to `pointStart` to produce a modified x
* value.
*/
pointStart?: number;
/**
* (Highcharts, Highstock, Gantt) A pixel value specifying a fixed width
* for each column or bar point. When set to `undefined`, the width is
* calculated from the `pointPadding` and `groupPadding`. The width
* effects the dimension that is not based on the point value. For
* column series it is the horizontal length and for bar series it is
* the vertical length.
*/
pointWidth?: number;
/**
* (Highcharts, Highstock) When true, X values in the data set are
* relative to the current `pointStart`, `pointInterval` and
* `pointIntervalUnit` settings. This allows compression of the data for
* datasets with irregular X values.
*
* The real X values are computed on the formula `f(x) = ax + b`, where
* `a` is the `pointInterval` (optionally with a time unit given by
* `pointIntervalUnit`), and `b` is the `pointStart`.
*/
relativeXValue?: boolean;
/**
* (Highcharts) Whether to select the series initially. If
* `showCheckbox` is true, the checkbox next to the series name in the
* legend will be checked for a selected series.
*/
selected?: boolean;
/**
* (Highcharts) Whether to apply a drop shadow to the graph line. Since
* 2.3 the shadow can be an object configuration containing `color`,
* `offsetX`, `offsetY`, `opacity` and `width`.
*
* Note that in some cases, like stacked columns or other dense layouts,
* the series may cast shadows on each other. In that case, the
* `chart.seriesGroupShadow` allows applying a common drop shadow to the
* whole series group.
*/
shadow?: (boolean|Highcharts.ShadowOptionsObject);
/**
* (Highcharts) If true, a checkbox is displayed next to the legend item
* to allow selecting the series. The state of the checkbox is
* determined by the `selected` option.
*/
showCheckbox?: boolean;
/**
* (Highcharts) Whether to display this particular series or series type
* in the legend. Standalone series are shown in legend by default, and
* linked series are not. Since v7.2.0 it is possible to show series
* that use colorAxis by setting this option to `true`.
*/
showInLegend?: boolean;
/**
* (Highcharts) If set to `true`, the accessibility module will skip
* past the points in this series for keyboard navigation.
*/
skipKeyboardNavigation?: boolean;
/**
* (Highcharts, Highstock) When this is true, the series will not cause
* the Y axis to cross the zero plane (or threshold option) unless the
* data actually crosses the plane.
*
* For example, if `softThreshold` is `false`, a series of 0, 1, 2, 3
* will make the Y axis show negative values according to the
* `minPadding` option. If `softThreshold` is `true`, the Y axis starts
* at 0.
*/
softThreshold?: boolean;
/**
* (Highcharts) Sonification/audio chart options for a series.
*/
sonification?: Highcharts.SeriesSonificationOptions;
/**
* (Highcharts, Highstock) Whether to stack the values of each series on
* top of each other. Possible values are `undefined` to disable,
* `"normal"` to stack by value or `"percent"`.
*
* When stacking is enabled, data must be sorted in ascending X order.
*
* Some stacking options are related to specific series types. In the
* streamgraph series type, the stacking option is set to `"stream"`.
* The second one is `"overlap"`, which only applies to waterfall
* series.
*/
stacking?: Highcharts.OptionsStackingValue;
states?: Highcharts.SeriesStatesOptionsObject;
/**
* (Highcharts) Sticky tracking of mouse events. When true, the
* `mouseOut` event on a series isn't triggered until the mouse moves
* over another series, or out of the plot area. When false, the
* `mouseOut` event on a series is triggered when the mouse leaves the
* area around the series' graph or markers. This also implies the
* tooltip when not shared. When `stickyTracking` is false and
* `tooltip.shared` is false, the tooltip will be hidden when moving the
* mouse between series. Defaults to true for line and area type series,
* but to false for columns, pies etc.
*
* **Note:** The boost module will force this option because of
* technical limitations.
*/
stickyTracking?: boolean;
/**
* (Highcharts) The Y axis value to serve as the base for the columns,
* for distinguishing between values above and below a threshold. If
* `null`, the columns extend from the padding Y axis minimum.
*/
threshold?: (number|null);
/**
* (Highcharts) A configuration object for the tooltip rendering of each
* single series. Properties are inherited from tooltip, but only the
* following properties can be defined on a series level.
*/
tooltip?: Highcharts.SeriesTooltipOptionsObject;
/**
* (Highcharts, Highstock, Gantt) When a series contains a `data` array
* that is longer than this, the Series class looks for data
* configurations of plain numbers or arrays of numbers. The first and
* last valid points are checked. If found, the rest of the data is
* assumed to be the same. This saves expensive data checking and
* indexing in long series, and makes data-heavy charts render faster.
*
* Set it to `0` disable.
*
* Note:
*
* - In boost mode turbo threshold is forced. Only array of numbers or
* two dimensional arrays are allowed.
*
* - In version 11.4.3 and earlier, if object configurations were passed
* beyond the turbo threshold, a warning was logged in the console and
* the data series didn't render.
*/
turboThreshold?: number;
/**
* (Highcharts) Set the initial visibility of the series.
*/
visible?: boolean;
/**
* (Highcharts, Highstock) Defines the Axis on which the zones are
* applied.
*/
zoneAxis?: string;
/**
* (Highcharts, Highstock) An array defining zones within a series.
* Zones can be applied to the X axis, Y axis or Z axis for bubbles,
* according to the `zoneAxis` option. The zone definitions have to be
* in ascending order regarding to the value.
*
* In styled mode, the color zones are styled with the
* `.highcharts-zone-{n}` class, or custom classed from the `className`
* option (view live demo).
*/
zones?: Array;
}
/**
* (Highcharts) A `variwide` series. If the type option is not specified, it
* is inherited from chart.type.
*
* Configuration options for the series are given in three levels:
*
* 1. Options for all series in a chart are defined in the
* plotOptions.series object.
*
* 2. Options for all `variwide` series are defined in plotOptions.variwide.
*
* 3. Options for one single series are given in the series instance array.
* (see online documentation for example)
*
* **TypeScript:**
*
* - the type option must always be set.
*
* - when accessing an array of series, the combined set of all series types
* is represented by Highcharts.SeriesOptionsType . Narrowing down to the
* specific type can be done by checking the `type` property. (see online
* documentation for example)
*
* You have to extend the `SeriesVariwideOptions` via an interface to allow
* custom properties: ``` declare interface SeriesVariwideOptions {
* customProperty: string; }
*
*/
interface SeriesVariwideOptions extends Highcharts.PlotVariwideOptions, Highcharts.SeriesOptions {
/**
* (Highcharts) An array of data points for the series. For the
* `variwide` series type, points can be given in the following ways:
*
* 1. An array of arrays with 3 or 2 values. In this case, the values
* correspond to `x,y,z`. If the first value is a string, it is applied
* as the name of the point, and the `x` value is inferred. The `x`
* value can also be omitted, in which case the inner arrays should be
* of length 2. Then the `x` value is automatically calculated, either
* starting at 0 and incremented by 1, or from `pointStart` and
* `pointInterval` given in the series options. (see online
* documentation for example)
*
* 2. An array of objects with named values. The following snippet shows
* only a few settings, see the complete options set below. If the total
* number of data points exceeds the series' turboThreshold, this option
* is not available. (see online documentation for example)
*/
data?: Array<([(number|string), number]|[(number|string), number, number]|Highcharts.PointOptionsObject)>;
/**
* (Highcharts, Highstock, Highmaps, Gantt) This property is only in
* TypeScript non-optional and might be `undefined` in series objects
* from unknown sources.
*/
type: "variwide";
}
}