javafx.print.PageLayout Maven / Gradle / Ivy
/*
* Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation. Oracle designates this
* particular file as subject to the "Classpath" exception as provided
* by Oracle in the LICENSE file that accompanied this code.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*/
package javafx.print;
import static javafx.print.PageOrientation.*;
/**
*
* A PageLayout encapsulates the information needed to
* lay out content. The reported width and height can be
* considered equivalent to the clip enforced by a Window.
* Applications that obtain a PageLayout instance will
* need to inspect the width and height to perform layout and pagination.
* Other information such as orientation and the Paper being used
* and margins outside of this area are not needed for page rendering.
*
* Printers usually have hardware margins where they cannot print.
* A PageLayout instance obtained from a PrinterJob in the context
* of a specific printer will be correctly set up to print over
* the whole of that area. If an application adjusts the printable
* area outside of this bounds, rendering to those areas will be
* clipped by the device.
*
* Within those hardware margins, the application may define any
* printable area it needs. The resulting printable area will
* define the effective dimensions
* of the page available to the application at printing time.
*
* Applying a PageLayout configured based on one printer,
* to a job on a different printer may not work correctly,
* as the second printer may not support the same margins, and may not
* even support the same Paper. In such a case, the PageLayout must
* be validated against the new printer.
*
* A PageLayout is immutable.
*
* @since JavaFX 8.0
*/
public final class PageLayout {
private PageOrientation orient;
private Paper paper;
private double lMargin, rMargin, tMargin, bMargin;
/**
* Create a PageLayout using the specified Paper size and orientation.
* Default margins are 0.75 inch which is 56 points.
* If the paper dimension is smaller than this,
* the margins will be reduced.
* @param paper the paper to use
* @param orient orientation of the layout
* @throws IllegalArgumentException if paper or orient is null.
*/
PageLayout(Paper paper, PageOrientation orient) {
this(paper, orient, 56, 56, 56, 56);
}
/**
* Note that the margins are to be specified as applying after
* the rotation due to the orientation. Thus the left margin
* always defines the x origin of the printable area,
* and the top margin always defines its y origin.
* @param paper the paper to use
* @param orient orientation of the layout
* @param leftMargin the left margin in points.
* @param rightMargin the left margin in points.
* @param topMargin the top margin in points.
* @param bottomMargin the bottom margin in points.
* @throws IllegalArgumentException if the margins exceed the
* corresponding paper dimension, or are negative, or if
* paper or orient is null.
*/
PageLayout(Paper paper, PageOrientation orient,
double leftMargin, double rightMargin,
double topMargin, double bottomMargin) {
if (paper == null || orient == null ||
leftMargin < 0 || rightMargin < 0 ||
topMargin < 0 || bottomMargin < 0) {
throw new IllegalArgumentException("Illegal parameters");
}
if (orient == PORTRAIT || orient == REVERSE_PORTRAIT) {
if (leftMargin+rightMargin > paper.getWidth() ||
topMargin+bottomMargin > paper.getHeight()) {
throw new IllegalArgumentException("Bad margins");
}
} else if (leftMargin+rightMargin > paper.getHeight() ||
topMargin+bottomMargin > paper.getWidth()) {
throw new IllegalArgumentException("Bad margins");
}
this.paper = paper;
this.orient = orient;
this.lMargin = leftMargin;
this.rMargin = rightMargin;
this.tMargin = topMargin;
this.bMargin = bottomMargin;
}
public PageOrientation getPageOrientation() {
return orient;
}
/**
* The paper used.
* @return the Paper used for this PageLayout.
*/
public Paper getPaper() {
return paper;
}
/**
* Returns the width dimension of the printable area of the page,
* in 1/72 of an inch points, taking into account the orientation.
*
* The printable area is width or height reduced by the
* requested margins on each side. If the requested margins
* are smaller than the the hardware margins, rendering may
* be clipped by the device.
*
* Since the returned value accounts for orientation, this means if
* if the orientation is LANDSCAPE or REVERSE_LANDSCAPE, then
* the left and right margins are subtracted from the height of
* the underlying paper, since it is rotated 90 degrees.
* @return printable width in points.
*/
public double getPrintableWidth() {
double pw = 0;
if (orient == PORTRAIT || orient == REVERSE_PORTRAIT) {
pw = paper.getWidth();
} else {
pw = paper.getHeight();
}
pw -= (lMargin+rMargin);
if (pw < 0) {
pw = 0;
}
return pw;
}
/**
* Returns the height dimension of the printable area of the page,
* in 1/72 of an inch, taking into account the orientation.
*
* The printable area is width or height reduced by the
* requested margins on each side. If the requested margins
* are smaller than the the hardware margins, rendering may
* be clipped by the device.
*
* Since the returned value accounts for orientation, this means if
* if the orientation is LANDSCAPE or REVERSE_LANDSCAPE, then
* the top and bottom margins are subtracted from the height of
* the underlying paper, since it is rotated 90 degrees.
* @return printable height in points.
*/
public double getPrintableHeight() {
double ph = 0;
if (orient == PORTRAIT || orient == REVERSE_PORTRAIT) {
ph = paper.getHeight();
} else {
ph = paper.getWidth();
}
ph -= (tMargin+bMargin);
if (ph < 0) {
ph = 0;
}
return ph;
}
/**
* Returns the left margin of the page layout in points.
* This value is in the orientation of the PageLayout.
* @return left margin in points.
*/
public double getLeftMargin() {
return lMargin;
}
/**
* Returns the right margin of the page layout in points.
* This value is in the orientation of the PageLayout.
* @return right margin in points.
*/
public double getRightMargin() {
return rMargin;
}
/**
* Returns the top margin of the page layout in points.
* This value is in the orientation of the PageLayout.
* @return top margin in points.
*/
public double getTopMargin() {
return tMargin;
}
/**
* Returns the bottom margin of the page layout in points.
* This value is in the orientation of the PageLayout.
* @return bottom margin in points.
*/
public double getBottomMargin() {
return bMargin;
}
@Override public boolean equals(Object o) {
if (o instanceof PageLayout) {
PageLayout other = (PageLayout)o;
return
paper.equals(other.paper) &&
orient.equals(other.orient) &&
tMargin == other.tMargin &&
bMargin == other.bMargin &&
rMargin == other.rMargin &&
lMargin == other.lMargin;
} else {
return false;
}
}
@Override public int hashCode() {
return paper.hashCode() + orient.hashCode()+
(int)(tMargin+bMargin+lMargin+rMargin);
}
@Override public String toString() {
return
"Paper="+paper+
" Orient="+orient+
" leftMargin="+lMargin+
" rightMargin="+rMargin+
" topMargin="+tMargin+
" bottomMargin="+bMargin;
}
}