io.netty.handler.codec.http.websocketx.WebSocketCloseStatus Maven / Gradle / Ivy
/*
* Copyright 2019 The Netty Project
*
* The Netty Project licenses this file to you under the Apache License,
* version 2.0 (the "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*/
package io.netty.handler.codec.http.websocketx;
import static io.netty.util.internal.ObjectUtil.checkNotNull;
/**
* WebSocket status codes specified in RFC-6455.
*
*
* RFC-6455 The WebSocket Protocol, December 2011:
* https://tools.ietf.org/html/rfc6455#section-7.4.1
*
* WebSocket Protocol Registries, April 2019:
* https://www.iana.org/assignments/websocket/websocket.xhtml
*
* 7.4.1. Defined Status Codes
*
* Endpoints MAY use the following pre-defined status codes when sending
* a Close frame.
*
* 1000
*
* 1000 indicates a normal closure, meaning that the purpose for
* which the connection was established has been fulfilled.
*
* 1001
*
* 1001 indicates that an endpoint is "going away", such as a server
* going down or a browser having navigated away from a page.
*
* 1002
*
* 1002 indicates that an endpoint is terminating the connection due
* to a protocol error.
*
* 1003
*
* 1003 indicates that an endpoint is terminating the connection
* because it has received a type of data it cannot accept (e.g., an
* endpoint that understands only text data MAY send this if it
* receives a binary message).
*
* 1004
*
* Reserved. The specific meaning might be defined in the future.
*
* 1005
*
* 1005 is a reserved value and MUST NOT be set as a status code in a
* Close control frame by an endpoint. It is designated for use in
* applications expecting a status code to indicate that no status
* code was actually present.
*
* 1006
*
* 1006 is a reserved value and MUST NOT be set as a status code in a
* Close control frame by an endpoint. It is designated for use in
* applications expecting a status code to indicate that the
* connection was closed abnormally, e.g., without sending or
* receiving a Close control frame.
*
* 1007
*
* 1007 indicates that an endpoint is terminating the connection
* because it has received data within a message that was not
* consistent with the type of the message (e.g., non-UTF-8 [RFC3629]
* data within a text message).
*
* 1008
*
* 1008 indicates that an endpoint is terminating the connection
* because it has received a message that violates its policy. This
* is a generic status code that can be returned when there is no
* other more suitable status code (e.g., 1003 or 1009) or if there
* is a need to hide specific details about the policy.
*
* 1009
*
* 1009 indicates that an endpoint is terminating the connection
* because it has received a message that is too big for it to
* process.
*
* 1010
*
* 1010 indicates that an endpoint (client) is terminating the
* connection because it has expected the server to negotiate one or
* more extension, but the server didn't return them in the response
* message of the WebSocket handshake. The list of extensions that
* are needed SHOULD appear in the /reason/ part of the Close frame.
* Note that this status code is not used by the server, because it
* can fail the WebSocket handshake instead.
*
* 1011
*
* 1011 indicates that a server is terminating the connection because
* it encountered an unexpected condition that prevented it from
* fulfilling the request.
*
* 1012 (IANA Registry, Non RFC-6455)
*
* 1012 indicates that the service is restarted. a client may reconnect,
* and if it choses to do, should reconnect using a randomized delay
* of 5 - 30 seconds.
*
* 1013 (IANA Registry, Non RFC-6455)
*
* 1013 indicates that the service is experiencing overload. a client
* should only connect to a different IP (when there are multiple for the
* target) or reconnect to the same IP upon user action.
*
* 1014 (IANA Registry, Non RFC-6455)
*
* The server was acting as a gateway or proxy and received an invalid
* response from the upstream server. This is similar to 502 HTTP Status Code.
*
* 1015
*
* 1015 is a reserved value and MUST NOT be set as a status code in a
* Close control frame by an endpoint. It is designated for use in
* applications expecting a status code to indicate that the
* connection was closed due to a failure to perform a TLS handshake
* (e.g., the server certificate can't be verified).
*
*
* 7.4.2. Reserved Status Code Ranges
*
* 0-999
*
* Status codes in the range 0-999 are not used.
*
* 1000-2999
*
* Status codes in the range 1000-2999 are reserved for definition by
* this protocol, its future revisions, and extensions specified in a
* permanent and readily available public specification.
*
* 3000-3999
*
* Status codes in the range 3000-3999 are reserved for use by
* libraries, frameworks, and applications. These status codes are
* registered directly with IANA. The interpretation of these codes
* is undefined by this protocol.
*
* 4000-4999
*
* Status codes in the range 4000-4999 are reserved for private use
* and thus can't be registered. Such codes can be used by prior
* agreements between WebSocket applications. The interpretation of
* these codes is undefined by this protocol.
*
*
* While {@link WebSocketCloseStatus} is enum-like structure, its instances should NOT be compared by reference.
* Instead, either {@link #equals(Object)} should be used or direct comparison of {@link #code()} value.
*/
public final class WebSocketCloseStatus implements Comparable {
public static final WebSocketCloseStatus NORMAL_CLOSURE =
new WebSocketCloseStatus(1000, "Bye");
public static final WebSocketCloseStatus ENDPOINT_UNAVAILABLE =
new WebSocketCloseStatus(1001, "Endpoint unavailable");
public static final WebSocketCloseStatus PROTOCOL_ERROR =
new WebSocketCloseStatus(1002, "Protocol error");
public static final WebSocketCloseStatus INVALID_MESSAGE_TYPE =
new WebSocketCloseStatus(1003, "Invalid message type");
public static final WebSocketCloseStatus INVALID_PAYLOAD_DATA =
new WebSocketCloseStatus(1007, "Invalid payload data");
public static final WebSocketCloseStatus POLICY_VIOLATION =
new WebSocketCloseStatus(1008, "Policy violation");
public static final WebSocketCloseStatus MESSAGE_TOO_BIG =
new WebSocketCloseStatus(1009, "Message too big");
public static final WebSocketCloseStatus MANDATORY_EXTENSION =
new WebSocketCloseStatus(1010, "Mandatory extension");
public static final WebSocketCloseStatus INTERNAL_SERVER_ERROR =
new WebSocketCloseStatus(1011, "Internal server error");
public static final WebSocketCloseStatus SERVICE_RESTART =
new WebSocketCloseStatus(1012, "Service Restart");
public static final WebSocketCloseStatus TRY_AGAIN_LATER =
new WebSocketCloseStatus(1013, "Try Again Later");
public static final WebSocketCloseStatus BAD_GATEWAY =
new WebSocketCloseStatus(1014, "Bad Gateway");
// 1004, 1005, 1006, 1015 are reserved and should never be used by user
//public static final WebSocketCloseStatus SPECIFIC_MEANING = register(1004, "...");
//public static final WebSocketCloseStatus EMPTY = register(1005, "Empty");
//public static final WebSocketCloseStatus ABNORMAL_CLOSURE = register(1006, "Abnormal closure");
//public static final WebSocketCloseStatus TLS_HANDSHAKE_FAILED(1015, "TLS handshake failed");
private final int statusCode;
private final String reasonText;
private String text;
public WebSocketCloseStatus(int statusCode, String reasonText) {
if (!isValidStatusCode(statusCode)) {
throw new IllegalArgumentException(
"WebSocket close status code does NOT comply with RFC-6455: " + statusCode);
}
this.statusCode = statusCode;
this.reasonText = checkNotNull(reasonText, "reasonText");
}
public int code() {
return statusCode;
}
public String reasonText() {
return reasonText;
}
/**
* Order of {@link WebSocketCloseStatus} only depends on {@link #code()}.
*/
@Override
public int compareTo(WebSocketCloseStatus o) {
return code() - o.code();
}
/**
* Equality of {@link WebSocketCloseStatus} only depends on {@link #code()}.
*/
@Override
public boolean equals(Object o) {
if (this == o) {
return true;
}
if (null == o || getClass() != o.getClass()) {
return false;
}
WebSocketCloseStatus that = (WebSocketCloseStatus) o;
return statusCode == that.statusCode;
}
@Override
public int hashCode() {
return statusCode;
}
@Override
public String toString() {
String text = this.text;
if (text == null) {
// E.g.: "1000 Bye", "1009 Message too big"
this.text = text = code() + " " + reasonText();
}
return text;
}
public static boolean isValidStatusCode(int code) {
return code < 0 ||
1000 <= code && code <= 1003 ||
1007 <= code && code <= 1014 ||
3000 <= code;
}
public static WebSocketCloseStatus valueOf(int code) {
switch (code) {
case 1000:
return NORMAL_CLOSURE;
case 1001:
return ENDPOINT_UNAVAILABLE;
case 1002:
return PROTOCOL_ERROR;
case 1003:
return INVALID_MESSAGE_TYPE;
case 1007:
return INVALID_PAYLOAD_DATA;
case 1008:
return POLICY_VIOLATION;
case 1009:
return MESSAGE_TOO_BIG;
case 1010:
return MANDATORY_EXTENSION;
case 1011:
return INTERNAL_SERVER_ERROR;
case 1012:
return SERVICE_RESTART;
case 1013:
return TRY_AGAIN_LATER;
case 1014:
return BAD_GATEWAY;
default:
return new WebSocketCloseStatus(code, "Close status #" + code);
}
}
}