src.android.media.JetPlayer Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of android-all Show documentation
Show all versions of android-all Show documentation
A library jar that provides APIs for Applications written for the Google Android Platform.
/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package android.media;
import java.io.FileDescriptor;
import java.lang.ref.WeakReference;
import java.lang.CloneNotSupportedException;
import android.annotation.UnsupportedAppUsage;
import android.content.res.AssetFileDescriptor;
import android.os.Looper;
import android.os.Handler;
import android.os.Message;
import android.util.AndroidRuntimeException;
import android.util.Log;
/**
* JetPlayer provides access to JET content playback and control.
*
* Please refer to the JET Creator User Manual for a presentation of the JET interactive
* music concept and how to use the JetCreator tool to create content to be player by JetPlayer.
*
*
Use of the JetPlayer class is based around the playback of a number of JET segments
* sequentially added to a playback FIFO queue. The rendering of the MIDI content stored in each
* segment can be dynamically affected by two mechanisms:
*
* - tracks in a segment can be muted or unmuted at any moment, individually or through
* a mask (to change the mute state of multiple tracks at once)
* - parts of tracks in a segment can be played at predefined points in the segment, in order
* to maintain synchronization with the other tracks in the segment. This is achieved through
* the notion of "clips", which can be triggered at any time, but that will play only at the
* right time, as authored in the corresponding JET file.
*
* As a result of the rendering and playback of the JET segments, the user of the JetPlayer instance
* can receive notifications from the JET engine relative to:
*
* - the playback state,
* - the number of segments left to play in the queue,
* - application controller events (CC80-83) to mark points in the MIDI segments.
*
* Use {@link #getJetPlayer()} to construct a JetPlayer instance. JetPlayer is a singleton class.
*
*
*
* Developer Guides
* For more information about how to use JetPlayer, read the
* JetPlayer developer guide.
*/
public class JetPlayer
{
//--------------------------------------------
// Constants
//------------------------
/**
* The maximum number of simultaneous tracks. Use {@link #getMaxTracks()} to
* access this value.
*/
private static int MAXTRACKS = 32;
// to keep in sync with the JetPlayer class constants
// defined in frameworks/base/include/media/JetPlayer.h
private static final int JET_EVENT = 1;
private static final int JET_USERID_UPDATE = 2;
private static final int JET_NUMQUEUEDSEGMENT_UPDATE = 3;
private static final int JET_PAUSE_UPDATE = 4;
// to keep in sync with external/sonivox/arm-wt-22k/lib_src/jet_data.h
// Encoding of event information on 32 bits
private static final int JET_EVENT_VAL_MASK = 0x0000007f; // mask for value
private static final int JET_EVENT_CTRL_MASK = 0x00003f80; // mask for controller
private static final int JET_EVENT_CHAN_MASK = 0x0003c000; // mask for channel
private static final int JET_EVENT_TRACK_MASK = 0x00fc0000; // mask for track number
private static final int JET_EVENT_SEG_MASK = 0xff000000; // mask for segment ID
private static final int JET_EVENT_CTRL_SHIFT = 7; // shift to get controller number to bit 0
private static final int JET_EVENT_CHAN_SHIFT = 14; // shift to get MIDI channel to bit 0
private static final int JET_EVENT_TRACK_SHIFT = 18; // shift to get track ID to bit 0
private static final int JET_EVENT_SEG_SHIFT = 24; // shift to get segment ID to bit 0
// to keep in sync with values used in external/sonivox/arm-wt-22k/Android.mk
// Jet rendering audio parameters
private static final int JET_OUTPUT_RATE = 22050; // _SAMPLE_RATE_22050 in Android.mk
private static final int JET_OUTPUT_CHANNEL_CONFIG =
AudioFormat.CHANNEL_OUT_STEREO; // NUM_OUTPUT_CHANNELS=2 in Android.mk
//--------------------------------------------
// Member variables
//------------------------
/**
* Handler for jet events and status updates coming from the native code
*/
private NativeEventHandler mEventHandler = null;
/**
* Looper associated with the thread that creates the AudioTrack instance
*/
private Looper mInitializationLooper = null;
/**
* Lock to protect the event listener updates against event notifications
*/
private final Object mEventListenerLock = new Object();
private OnJetEventListener mJetEventListener = null;
private static JetPlayer singletonRef;
//--------------------------------
// Used exclusively by native code
//--------------------
/**
* Accessed by native methods: provides access to C++ JetPlayer object
*/
@SuppressWarnings("unused")
@UnsupportedAppUsage
private long mNativePlayerInJavaObj;
//--------------------------------------------
// Constructor, finalize
//------------------------
/**
* Factory method for the JetPlayer class.
* @return the singleton JetPlayer instance
*/
public static JetPlayer getJetPlayer() {
if (singletonRef == null) {
singletonRef = new JetPlayer();
}
return singletonRef;
}
/**
* Cloning a JetPlayer instance is not supported. Calling clone() will generate an exception.
*/
public Object clone() throws CloneNotSupportedException {
// JetPlayer is a singleton class,
// so you can't clone a JetPlayer instance
throw new CloneNotSupportedException();
}
private JetPlayer() {
// remember which looper is associated with the JetPlayer instanciation
if ((mInitializationLooper = Looper.myLooper()) == null) {
mInitializationLooper = Looper.getMainLooper();
}
int buffSizeInBytes = AudioTrack.getMinBufferSize(JET_OUTPUT_RATE,
JET_OUTPUT_CHANNEL_CONFIG, AudioFormat.ENCODING_PCM_16BIT);
if ((buffSizeInBytes != AudioTrack.ERROR)
&& (buffSizeInBytes != AudioTrack.ERROR_BAD_VALUE)) {
native_setup(new WeakReference(this),
JetPlayer.getMaxTracks(),
// bytes to frame conversion:
// 1200 == minimum buffer size in frames on generation 1 hardware
Math.max(1200, buffSizeInBytes /
(AudioFormat.getBytesPerSample(AudioFormat.ENCODING_PCM_16BIT) *
2 /*channels*/)));
}
}
protected void finalize() {
native_finalize();
}
/**
* Stops the current JET playback, and releases all associated native resources.
* The object can no longer be used and the reference should be set to null
* after a call to release().
*/
public void release() {
native_release();
singletonRef = null;
}
//--------------------------------------------
// Getters
//------------------------
/**
* Returns the maximum number of simultaneous MIDI tracks supported by JetPlayer
*/
public static int getMaxTracks() {
return JetPlayer.MAXTRACKS;
}
//--------------------------------------------
// Jet functionality
//------------------------
/**
* Loads a .jet file from a given path.
* @param path the path to the .jet file, for instance "/sdcard/mygame/music.jet".
* @return true if loading the .jet file was successful, false if loading failed.
*/
public boolean loadJetFile(String path) {
return native_loadJetFromFile(path);
}
/**
* Loads a .jet file from an asset file descriptor.
* @param afd the asset file descriptor.
* @return true if loading the .jet file was successful, false if loading failed.
*/
public boolean loadJetFile(AssetFileDescriptor afd) {
long len = afd.getLength();
if (len < 0) {
throw new AndroidRuntimeException("no length for fd");
}
return native_loadJetFromFileD(
afd.getFileDescriptor(), afd.getStartOffset(), len);
}
/**
* Closes the resource containing the JET content.
* @return true if successfully closed, false otherwise.
*/
public boolean closeJetFile() {
return native_closeJetFile();
}
/**
* Starts playing the JET segment queue.
* @return true if rendering and playback is successfully started, false otherwise.
*/
public boolean play() {
return native_playJet();
}
/**
* Pauses the playback of the JET segment queue.
* @return true if rendering and playback is successfully paused, false otherwise.
*/
public boolean pause() {
return native_pauseJet();
}
/**
* Queues the specified segment in the JET queue.
* @param segmentNum the identifier of the segment.
* @param libNum the index of the sound bank associated with the segment. Use -1 to indicate
* that no sound bank (DLS file) is associated with this segment, in which case JET will use
* the General MIDI library.
* @param repeatCount the number of times the segment will be repeated. 0 means the segment will
* only play once. -1 means the segment will repeat indefinitely.
* @param transpose the amount of pitch transposition. Set to 0 for normal playback.
* Range is -12 to +12.
* @param muteFlags a bitmask to specify which MIDI tracks will be muted during playback. Bit 0
* affects track 0, bit 1 affects track 1 etc.
* @param userID a value specified by the application that uniquely identifies the segment.
* this value is received in the
* {@link OnJetEventListener#onJetUserIdUpdate(JetPlayer, int, int)} event listener method.
* Normally, the application will keep a byte value that is incremented each time a new
* segment is queued up. This can be used to look up any special characteristics of that
* track including trigger clips and mute flags.
* @return true if the segment was successfully queued, false if the queue is full or if the
* parameters are invalid.
*/
public boolean queueJetSegment(int segmentNum, int libNum, int repeatCount,
int transpose, int muteFlags, byte userID) {
return native_queueJetSegment(segmentNum, libNum, repeatCount,
transpose, muteFlags, userID);
}
/**
* Queues the specified segment in the JET queue.
* @param segmentNum the identifier of the segment.
* @param libNum the index of the soundbank associated with the segment. Use -1 to indicate that
* no sound bank (DLS file) is associated with this segment, in which case JET will use
* the General MIDI library.
* @param repeatCount the number of times the segment will be repeated. 0 means the segment will
* only play once. -1 means the segment will repeat indefinitely.
* @param transpose the amount of pitch transposition. Set to 0 for normal playback.
* Range is -12 to +12.
* @param muteArray an array of booleans to specify which MIDI tracks will be muted during
* playback. The value at index 0 affects track 0, value at index 1 affects track 1 etc.
* The length of the array must be {@link #getMaxTracks()} for the call to succeed.
* @param userID a value specified by the application that uniquely identifies the segment.
* this value is received in the
* {@link OnJetEventListener#onJetUserIdUpdate(JetPlayer, int, int)} event listener method.
* Normally, the application will keep a byte value that is incremented each time a new
* segment is queued up. This can be used to look up any special characteristics of that
* track including trigger clips and mute flags.
* @return true if the segment was successfully queued, false if the queue is full or if the
* parameters are invalid.
*/
public boolean queueJetSegmentMuteArray(int segmentNum, int libNum, int repeatCount,
int transpose, boolean[] muteArray, byte userID) {
if (muteArray.length != JetPlayer.getMaxTracks()) {
return false;
}
return native_queueJetSegmentMuteArray(segmentNum, libNum, repeatCount,
transpose, muteArray, userID);
}
/**
* Modifies the mute flags.
* @param muteFlags a bitmask to specify which MIDI tracks are muted. Bit 0 affects track 0,
* bit 1 affects track 1 etc.
* @param sync if false, the new mute flags will be applied as soon as possible by the JET
* render and playback engine. If true, the mute flags will be updated at the start of the
* next segment. If the segment is repeated, the flags will take effect the next time
* segment is repeated.
* @return true if the mute flags were successfully updated, false otherwise.
*/
public boolean setMuteFlags(int muteFlags, boolean sync) {
return native_setMuteFlags(muteFlags, sync);
}
/**
* Modifies the mute flags for the current active segment.
* @param muteArray an array of booleans to specify which MIDI tracks are muted. The value at
* index 0 affects track 0, value at index 1 affects track 1 etc.
* The length of the array must be {@link #getMaxTracks()} for the call to succeed.
* @param sync if false, the new mute flags will be applied as soon as possible by the JET
* render and playback engine. If true, the mute flags will be updated at the start of the
* next segment. If the segment is repeated, the flags will take effect the next time
* segment is repeated.
* @return true if the mute flags were successfully updated, false otherwise.
*/
public boolean setMuteArray(boolean[] muteArray, boolean sync) {
if(muteArray.length != JetPlayer.getMaxTracks())
return false;
return native_setMuteArray(muteArray, sync);
}
/**
* Mutes or unmutes a single track.
* @param trackId the index of the track to mute.
* @param muteFlag set to true to mute, false to unmute.
* @param sync if false, the new mute flags will be applied as soon as possible by the JET
* render and playback engine. If true, the mute flag will be updated at the start of the
* next segment. If the segment is repeated, the flag will take effect the next time
* segment is repeated.
* @return true if the mute flag was successfully updated, false otherwise.
*/
public boolean setMuteFlag(int trackId, boolean muteFlag, boolean sync) {
return native_setMuteFlag(trackId, muteFlag, sync);
}
/**
* Schedules the playback of a clip.
* This will automatically update the mute flags in sync with the JET Clip Marker (controller
* 103). The parameter clipID must be in the range of 0-63. After the call to triggerClip, when
* JET next encounters a controller event 103 with bits 0-5 of the value equal to clipID and
* bit 6 set to 1, it will automatically unmute the track containing the controller event.
* When JET encounters the complementary controller event 103 with bits 0-5 of the value equal
* to clipID and bit 6 set to 0, it will mute the track again.
* @param clipId the identifier of the clip to trigger.
* @return true if the clip was successfully triggered, false otherwise.
*/
public boolean triggerClip(int clipId) {
return native_triggerClip(clipId);
}
/**
* Empties the segment queue, and clears all clips that are scheduled for playback.
* @return true if the queue was successfully cleared, false otherwise.
*/
public boolean clearQueue() {
return native_clearQueue();
}
//---------------------------------------------------------
// Internal class to handle events posted from native code
//------------------------
private class NativeEventHandler extends Handler
{
private JetPlayer mJet;
public NativeEventHandler(JetPlayer jet, Looper looper) {
super(looper);
mJet = jet;
}
@Override
public void handleMessage(Message msg) {
OnJetEventListener listener = null;
synchronized (mEventListenerLock) {
listener = mJet.mJetEventListener;
}
switch(msg.what) {
case JET_EVENT:
if (listener != null) {
// call the appropriate listener after decoding the event parameters
// encoded in msg.arg1
mJetEventListener.onJetEvent(
mJet,
(short)((msg.arg1 & JET_EVENT_SEG_MASK) >> JET_EVENT_SEG_SHIFT),
(byte) ((msg.arg1 & JET_EVENT_TRACK_MASK) >> JET_EVENT_TRACK_SHIFT),
// JETCreator channel numbers start at 1, but the index starts at 0
// in the .jet files
(byte)(((msg.arg1 & JET_EVENT_CHAN_MASK) >> JET_EVENT_CHAN_SHIFT) + 1),
(byte) ((msg.arg1 & JET_EVENT_CTRL_MASK) >> JET_EVENT_CTRL_SHIFT),
(byte) (msg.arg1 & JET_EVENT_VAL_MASK) );
}
return;
case JET_USERID_UPDATE:
if (listener != null) {
listener.onJetUserIdUpdate(mJet, msg.arg1, msg.arg2);
}
return;
case JET_NUMQUEUEDSEGMENT_UPDATE:
if (listener != null) {
listener.onJetNumQueuedSegmentUpdate(mJet, msg.arg1);
}
return;
case JET_PAUSE_UPDATE:
if (listener != null)
listener.onJetPauseUpdate(mJet, msg.arg1);
return;
default:
loge("Unknown message type " + msg.what);
return;
}
}
}
//--------------------------------------------
// Jet event listener
//------------------------
/**
* Sets the listener JetPlayer notifies when a JET event is generated by the rendering and
* playback engine.
* Notifications will be received in the same thread as the one in which the JetPlayer
* instance was created.
* @param listener
*/
public void setEventListener(OnJetEventListener listener) {
setEventListener(listener, null);
}
/**
* Sets the listener JetPlayer notifies when a JET event is generated by the rendering and
* playback engine.
* Use this method to receive JET events in the Handler associated with another
* thread than the one in which you created the JetPlayer instance.
* @param listener
* @param handler the Handler that will receive the event notification messages.
*/
public void setEventListener(OnJetEventListener listener, Handler handler) {
synchronized(mEventListenerLock) {
mJetEventListener = listener;
if (listener != null) {
if (handler != null) {
mEventHandler = new NativeEventHandler(this, handler.getLooper());
} else {
// no given handler, use the looper the AudioTrack was created in
mEventHandler = new NativeEventHandler(this, mInitializationLooper);
}
} else {
mEventHandler = null;
}
}
}
/**
* Handles the notification when the JET engine generates an event.
*/
public interface OnJetEventListener {
/**
* Callback for when the JET engine generates a new event.
*
* @param player the JET player the event is coming from
* @param segment 8 bit unsigned value
* @param track 6 bit unsigned value
* @param channel 4 bit unsigned value
* @param controller 7 bit unsigned value
* @param value 7 bit unsigned value
*/
void onJetEvent(JetPlayer player,
short segment, byte track, byte channel, byte controller, byte value);
/**
* Callback for when JET's currently playing segment's userID is updated.
*
* @param player the JET player the status update is coming from
* @param userId the ID of the currently playing segment
* @param repeatCount the repetition count for the segment (0 means it plays once)
*/
void onJetUserIdUpdate(JetPlayer player, int userId, int repeatCount);
/**
* Callback for when JET's number of queued segments is updated.
*
* @param player the JET player the status update is coming from
* @param nbSegments the number of segments in the JET queue
*/
void onJetNumQueuedSegmentUpdate(JetPlayer player, int nbSegments);
/**
* Callback for when JET pause state is updated.
*
* @param player the JET player the status update is coming from
* @param paused indicates whether JET is paused (1) or not (0)
*/
void onJetPauseUpdate(JetPlayer player, int paused);
}
//--------------------------------------------
// Native methods
//------------------------
private native final boolean native_setup(Object Jet_this,
int maxTracks, int trackBufferSize);
private native final void native_finalize();
private native final void native_release();
private native final boolean native_loadJetFromFile(String pathToJetFile);
private native final boolean native_loadJetFromFileD(FileDescriptor fd, long offset, long len);
private native final boolean native_closeJetFile();
private native final boolean native_playJet();
private native final boolean native_pauseJet();
private native final boolean native_queueJetSegment(int segmentNum, int libNum,
int repeatCount, int transpose, int muteFlags, byte userID);
private native final boolean native_queueJetSegmentMuteArray(int segmentNum, int libNum,
int repeatCount, int transpose, boolean[] muteArray, byte userID);
private native final boolean native_setMuteFlags(int muteFlags, boolean sync);
private native final boolean native_setMuteArray(boolean[]muteArray, boolean sync);
private native final boolean native_setMuteFlag(int trackId, boolean muteFlag, boolean sync);
private native final boolean native_triggerClip(int clipId);
private native final boolean native_clearQueue();
//---------------------------------------------------------
// Called exclusively by native code
//--------------------
@SuppressWarnings("unused")
@UnsupportedAppUsage
private static void postEventFromNative(Object jetplayer_ref,
int what, int arg1, int arg2) {
//logd("Event posted from the native side: event="+ what + " args="+ arg1+" "+arg2);
JetPlayer jet = (JetPlayer)((WeakReference)jetplayer_ref).get();
if ((jet != null) && (jet.mEventHandler != null)) {
Message m =
jet.mEventHandler.obtainMessage(what, arg1, arg2, null);
jet.mEventHandler.sendMessage(m);
}
}
//---------------------------------------------------------
// Utils
//--------------------
private final static String TAG = "JetPlayer-J";
private static void logd(String msg) {
Log.d(TAG, "[ android.media.JetPlayer ] " + msg);
}
private static void loge(String msg) {
Log.e(TAG, "[ android.media.JetPlayer ] " + msg);
}
}