java.util.zip.Inflater Maven / Gradle / Ivy
Show all versions of android-all Show documentation
/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package java.util.zip;
import dalvik.system.CloseGuard;
import java.io.FileDescriptor;
import java.util.Arrays;
/**
* This class decompresses data that was compressed using the DEFLATE
* algorithm (see specification).
*
* It is usually more convenient to use {@link InflaterInputStream}.
*
*
To decompress an in-memory {@code byte[]} to another in-memory {@code byte[]} manually:
*
* byte[] compressedBytes = ...
* int decompressedByteCount = ... // From your format's metadata.
* Inflater inflater = new Inflater();
* inflater.setInput(compressedBytes, 0, compressedBytes.length);
* byte[] decompressedBytes = new byte[decompressedByteCount];
* if (inflater.inflate(decompressedBytes) != decompressedByteCount) {
* throw new AssertionError();
* }
* inflater.end();
*
* In situations where you don't have all the input in one array (or have so much
* input that you want to feed it to the inflater in chunks), it's possible to call
* {@link #setInput} repeatedly, but you're much better off using {@link InflaterInputStream}
* to handle all this for you.
*
*
If you don't know how big the decompressed data will be, you can call {@link #inflate}
* repeatedly on a temporary buffer, copying the bytes to a {@link java.io.ByteArrayOutputStream},
* but this is probably another sign you'd be better off using {@link InflaterInputStream}.
*/
public class Inflater {
private int inLength;
private int inRead; // Set by inflateImpl.
private boolean finished; // Set by inflateImpl.
private boolean needsDictionary; // Set by inflateImpl.
private long streamHandle = -1;
private final CloseGuard guard = CloseGuard.get();
/**
* This constructor creates an inflater that expects a header from the input
* stream. Use {@link #Inflater(boolean)} if the input comes without a ZLIB
* header.
*/
public Inflater() {
this(false);
}
/**
* This constructor allows to create an inflater that expects no header from
* the input stream.
*
* @param noHeader
* {@code true} indicates that no ZLIB header comes with the
* input.
*/
public Inflater(boolean noHeader) {
streamHandle = createStream(noHeader);
guard.open("end");
}
private native long createStream(boolean noHeader1);
/**
* Releases resources associated with this {@code Inflater}. Any unused
* input or output is discarded. This method should be called explicitly in
* order to free native resources as soon as possible. After {@code end()} is
* called, other methods will typically throw {@code IllegalStateException}.
*/
public synchronized void end() {
guard.close();
if (streamHandle != -1) {
endImpl(streamHandle);
inRead = 0;
inLength = 0;
streamHandle = -1;
}
}
private native void endImpl(long handle);
@Override protected void finalize() {
try {
if (guard != null) {
guard.warnIfOpen();
}
end();
} finally {
try {
super.finalize();
} catch (Throwable t) {
throw new AssertionError(t);
}
}
}
/**
* Indicates if the {@code Inflater} has inflated the entire deflated
* stream. If deflated bytes remain and {@link #needsInput} returns {@code
* true} this method will return {@code false}. This method should be
* called after all deflated input is supplied to the {@code Inflater}.
*
* @return {@code true} if all input has been inflated, {@code false}
* otherwise.
*/
public synchronized boolean finished() {
return finished;
}
/**
* Returns the {@link Adler32} checksum of the bytes inflated so far, or the
* checksum of the preset dictionary if {@link #needsDictionary} returns true.
*/
public synchronized int getAdler() {
checkOpen();
return getAdlerImpl(streamHandle);
}
private native int getAdlerImpl(long handle);
/**
* Returns the total number of bytes read by the {@code Inflater}. This
* method is the same as {@link #getTotalIn} except that it returns a
* {@code long} value instead of an integer.
*/
public synchronized long getBytesRead() {
checkOpen();
return getTotalInImpl(streamHandle);
}
/**
* Returns a the total number of bytes written by this {@code Inflater}. This
* method is the same as {@code getTotalOut} except it returns a
* {@code long} value instead of an integer.
*/
public synchronized long getBytesWritten() {
checkOpen();
return getTotalOutImpl(streamHandle);
}
/**
* Returns the number of bytes of current input remaining to be read by this
* inflater.
*/
public synchronized int getRemaining() {
return inLength - inRead;
}
/**
* Returns the offset of the next byte to read in the underlying buffer.
*
* For internal use only.
*/
synchronized int getCurrentOffset() {
return inRead;
}
/**
* Returns the total number of bytes of input read by this {@code Inflater}. This
* method is limited to 32 bits; use {@link #getBytesRead} instead.
*/
public synchronized int getTotalIn() {
checkOpen();
return (int) Math.min(getTotalInImpl(streamHandle), (long) Integer.MAX_VALUE);
}
private native long getTotalInImpl(long handle);
/**
* Returns the total number of bytes written to the output buffer by this {@code
* Inflater}. The method is limited to 32 bits; use {@link #getBytesWritten} instead.
*/
public synchronized int getTotalOut() {
checkOpen();
return (int) Math.min(getTotalOutImpl(streamHandle), (long) Integer.MAX_VALUE);
}
private native long getTotalOutImpl(long handle);
/**
* Inflates bytes from the current input and stores them in {@code buf}.
*
* @param buf
* the buffer where decompressed data bytes are written.
* @return the number of bytes inflated.
* @throws DataFormatException
* if the underlying stream is corrupted or was not compressed
* using a {@code Deflater}.
*/
public int inflate(byte[] buf) throws DataFormatException {
return inflate(buf, 0, buf.length);
}
/**
* Inflates up to {@code byteCount} bytes from the current input and stores them in
* {@code buf} starting at {@code offset}.
*
* @throws DataFormatException
* if the underlying stream is corrupted or was not compressed
* using a {@code Deflater}.
* @return the number of bytes inflated.
*/
public synchronized int inflate(byte[] buf, int offset, int byteCount) throws DataFormatException {
Arrays.checkOffsetAndCount(buf.length, offset, byteCount);
checkOpen();
if (needsInput()) {
return 0;
}
boolean neededDict = needsDictionary;
needsDictionary = false;
int result = inflateImpl(buf, offset, byteCount, streamHandle);
if (needsDictionary && neededDict) {
throw new DataFormatException("Needs dictionary");
}
return result;
}
private native int inflateImpl(byte[] buf, int offset, int byteCount, long handle);
/**
* Returns true if the input bytes were compressed with a preset
* dictionary. This method should be called if the first call to {@link #inflate} returns 0,
* to determine whether a dictionary is required. If so, {@link #setDictionary}
* should be called with the appropriate dictionary before calling {@code
* inflate} again. Use {@link #getAdler} to determine which dictionary is required.
*/
public synchronized boolean needsDictionary() {
return needsDictionary;
}
/**
* Returns true if {@link #setInput} must be called before inflation can continue.
*/
public synchronized boolean needsInput() {
return inRead == inLength;
}
/**
* Resets this {@code Inflater}. Should be called prior to inflating a new
* set of data.
*/
public synchronized void reset() {
checkOpen();
finished = false;
needsDictionary = false;
inLength = inRead = 0;
resetImpl(streamHandle);
}
private native void resetImpl(long handle);
/**
* Sets the preset dictionary to be used for inflation to {@code dictionary}.
* See {@link #needsDictionary} for details.
*/
public synchronized void setDictionary(byte[] dictionary) {
setDictionary(dictionary, 0, dictionary.length);
}
/**
* Sets the preset dictionary to be used for inflation to a subsequence of {@code dictionary}
* starting at {@code offset} and continuing for {@code byteCount} bytes. See {@link
* #needsDictionary} for details.
*/
public synchronized void setDictionary(byte[] dictionary, int offset, int byteCount) {
checkOpen();
Arrays.checkOffsetAndCount(dictionary.length, offset, byteCount);
setDictionaryImpl(dictionary, offset, byteCount, streamHandle);
}
private native void setDictionaryImpl(byte[] dictionary, int offset, int byteCount, long handle);
/**
* Sets the current input to to be decompressed. This method should only be
* called if {@link #needsInput} returns {@code true}.
*/
public synchronized void setInput(byte[] buf) {
setInput(buf, 0, buf.length);
}
/**
* Sets the current input to to be decompressed. This method should only be
* called if {@link #needsInput} returns {@code true}.
*/
public synchronized void setInput(byte[] buf, int offset, int byteCount) {
checkOpen();
Arrays.checkOffsetAndCount(buf.length, offset, byteCount);
inRead = 0;
inLength = byteCount;
setInputImpl(buf, offset, byteCount, streamHandle);
}
private native void setInputImpl(byte[] buf, int offset, int byteCount, long handle);
synchronized int setFileInput(FileDescriptor fd, long offset, int byteCount) {
checkOpen();
inRead = 0;
inLength = setFileInputImpl(fd, offset, byteCount, streamHandle);
return inLength;
}
private native int setFileInputImpl(FileDescriptor fd, long offset, int byteCount, long handle);
private void checkOpen() {
if (streamHandle == -1) {
throw new IllegalStateException("attempt to use Inflater after calling end");
}
}
}