android.graphics.ImageFormat Maven / Gradle / Ivy
Show all versions of android-all Show documentation
/*
* Copyright (C) 2010 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package android.graphics;
public class ImageFormat {
/*
* these constants are chosen to be binary compatible with their previous
* location in PixelFormat.java
*/
public static final int UNKNOWN = 0;
/**
* RGB format used for pictures encoded as RGB_565. See
* {@link android.hardware.Camera.Parameters#setPictureFormat(int)}.
*/
public static final int RGB_565 = 4;
/**
* Android YUV format.
*
* This format is exposed to software decoders and applications.
*
* YV12 is a 4:2:0 YCrCb planar format comprised of a WxH Y plane followed
* by (W/2) x (H/2) Cr and Cb planes.
*
* This format assumes
*
* - an even width
* - an even height
* - a horizontal stride multiple of 16 pixels
* - a vertical stride equal to the height
*
*
*
* y_size = stride * height
* c_stride = ALIGN(stride/2, 16)
* c_size = c_stride * height/2
* size = y_size + c_size * 2
* cr_offset = y_size
* cb_offset = y_size + c_size
*
* For the {@link android.hardware.camera2} API, the {@link #YUV_420_888} format is
* recommended for YUV output instead.
*
* For the older camera API, this format is guaranteed to be supported for
* {@link android.hardware.Camera} preview images since API level 12; for earlier API versions,
* check {@link android.hardware.Camera.Parameters#getSupportedPreviewFormats()}.
*
*
Note that for camera preview callback use (see
* {@link android.hardware.Camera#setPreviewCallback}), the
* stride value is the smallest possible; that is, it is equal
* to:
*
*
stride = ALIGN(width, 16)
*
* @see android.hardware.Camera.Parameters#setPreviewCallback
* @see android.hardware.Camera.Parameters#setPreviewFormat
* @see android.hardware.Camera.Parameters#getSupportedPreviewFormats
*
*/
public static final int YV12 = 0x32315659;
/**
* Android Y8 format.
*
* Y8 is a YUV planar format comprised of a WxH Y plane only, with each pixel
* being represented by 8 bits. It is equivalent to just the Y plane from {@link #YV12}
* format.
*
* This format assumes
*
* - an even width
* - an even height
* - a horizontal stride multiple of 16 pixels
*
*
*
* y_size = stride * height
*
* For example, the {@link android.media.Image} object can provide data
* in this format from a {@link android.hardware.camera2.CameraDevice}
* through a {@link android.media.ImageReader} object if this format is
* supported by {@link android.hardware.camera2.CameraDevice}.
*
* @see android.media.Image
* @see android.media.ImageReader
* @see android.hardware.camera2.CameraDevice
*
* @hide
*/
public static final int Y8 = 0x20203859;
/**
* Android Y16 format.
*
* Y16 is a YUV planar format comprised of a WxH Y plane, with each pixel
* being represented by 16 bits. It is just like {@link #Y8}, but has 16
* bits per pixel (little endian).
*
* This format assumes
*
* - an even width
* - an even height
* - a horizontal stride multiple of 16 pixels
*
*
*
* y_size = stride * height
*
* For example, the {@link android.media.Image} object can provide data
* in this format from a {@link android.hardware.camera2.CameraDevice}
* through a {@link android.media.ImageReader} object if this format is
* supported by {@link android.hardware.camera2.CameraDevice}.
*
* @see android.media.Image
* @see android.media.ImageReader
* @see android.hardware.camera2.CameraDevice
*
* @hide
*/
public static final int Y16 = 0x20363159;
/**
* YCbCr format, used for video.
*
* For the {@link android.hardware.camera2} API, the {@link #YUV_420_888} format is
* recommended for YUV output instead.
*
* Whether this format is supported by the old camera API can be determined by
* {@link android.hardware.Camera.Parameters#getSupportedPreviewFormats()}.
*
*/
public static final int NV16 = 0x10;
/**
* YCrCb format used for images, which uses the NV21 encoding format.
*
* This is the default format
* for {@link android.hardware.Camera} preview images, when not otherwise set with
* {@link android.hardware.Camera.Parameters#setPreviewFormat(int)}.
*
* For the {@link android.hardware.camera2} API, the {@link #YUV_420_888} format is
* recommended for YUV output instead.
*/
public static final int NV21 = 0x11;
/**
* YCbCr format used for images, which uses YUYV (YUY2) encoding format.
*
* For the {@link android.hardware.camera2} API, the {@link #YUV_420_888} format is
* recommended for YUV output instead.
*
* This is an alternative format for {@link android.hardware.Camera} preview images. Whether
* this format is supported by the camera hardware can be determined by
* {@link android.hardware.Camera.Parameters#getSupportedPreviewFormats()}.
*/
public static final int YUY2 = 0x14;
/**
* Compressed JPEG format.
*
* This format is always supported as an output format for the
* {@link android.hardware.camera2} API, and as a picture format for the older
* {@link android.hardware.Camera} API
*/
public static final int JPEG = 0x100;
/**
* Multi-plane Android YUV 420 format
*
* This format is a generic YCbCr format, capable of describing any 4:2:0
* chroma-subsampled planar or semiplanar buffer (but not fully interleaved),
* with 8 bits per color sample.
*
* Images in this format are always represented by three separate buffers
* of data, one for each color plane. Additional information always
* accompanies the buffers, describing the row stride and the pixel stride
* for each plane.
*
* The order of planes in the array returned by
* {@link android.media.Image#getPlanes() Image#getPlanes()} is guaranteed such that
* plane #0 is always Y, plane #1 is always U (Cb), and plane #2 is always V (Cr).
*
* The Y-plane is guaranteed not to be interleaved with the U/V planes
* (in particular, pixel stride is always 1 in
* {@link android.media.Image.Plane#getPixelStride() yPlane.getPixelStride()}).
*
* The U/V planes are guaranteed to have the same row stride and pixel stride
* (in particular,
* {@link android.media.Image.Plane#getRowStride() uPlane.getRowStride()}
* == {@link android.media.Image.Plane#getRowStride() vPlane.getRowStride()} and
* {@link android.media.Image.Plane#getPixelStride() uPlane.getPixelStride()}
* == {@link android.media.Image.Plane#getPixelStride() vPlane.getPixelStride()};
* ).
*
* For example, the {@link android.media.Image} object can provide data
* in this format from a {@link android.hardware.camera2.CameraDevice}
* through a {@link android.media.ImageReader} object.
*
* @see android.media.Image
* @see android.media.ImageReader
* @see android.hardware.camera2.CameraDevice
*/
public static final int YUV_420_888 = 0x23;
/**
* Multi-plane Android YUV 422 format
*
* This format is a generic YCbCr format, capable of describing any 4:2:2
* chroma-subsampled (planar, semiplanar or interleaved) format,
* with 8 bits per color sample.
*
* Images in this format are always represented by three separate buffers
* of data, one for each color plane. Additional information always
* accompanies the buffers, describing the row stride and the pixel stride
* for each plane.
*
* The order of planes in the array returned by
* {@link android.media.Image#getPlanes() Image#getPlanes()} is guaranteed such that
* plane #0 is always Y, plane #1 is always U (Cb), and plane #2 is always V (Cr).
*
* In contrast to the {@link #YUV_420_888} format, the Y-plane may have a pixel
* stride greater than 1 in
* {@link android.media.Image.Plane#getPixelStride() yPlane.getPixelStride()}.
*
* The U/V planes are guaranteed to have the same row stride and pixel stride
* (in particular,
* {@link android.media.Image.Plane#getRowStride() uPlane.getRowStride()}
* == {@link android.media.Image.Plane#getRowStride() vPlane.getRowStride()} and
* {@link android.media.Image.Plane#getPixelStride() uPlane.getPixelStride()}
* == {@link android.media.Image.Plane#getPixelStride() vPlane.getPixelStride()};
* ).
*
* For example, the {@link android.media.Image} object can provide data
* in this format from a {@link android.media.MediaCodec}
* through {@link android.media.MediaCodec#getOutputImage} object.
*
* @see android.media.Image
* @see android.media.MediaCodec
*/
public static final int YUV_422_888 = 0x27;
/**
* Multi-plane Android YUV 444 format
*
* This format is a generic YCbCr format, capable of describing any 4:4:4
* (planar, semiplanar or interleaved) format,
* with 8 bits per color sample.
*
* Images in this format are always represented by three separate buffers
* of data, one for each color plane. Additional information always
* accompanies the buffers, describing the row stride and the pixel stride
* for each plane.
*
* The order of planes in the array returned by
* {@link android.media.Image#getPlanes() Image#getPlanes()} is guaranteed such that
* plane #0 is always Y, plane #1 is always U (Cb), and plane #2 is always V (Cr).
*
* In contrast to the {@link #YUV_420_888} format, the Y-plane may have a pixel
* stride greater than 1 in
* {@link android.media.Image.Plane#getPixelStride() yPlane.getPixelStride()}.
*
* The U/V planes are guaranteed to have the same row stride and pixel stride
* (in particular,
* {@link android.media.Image.Plane#getRowStride() uPlane.getRowStride()}
* == {@link android.media.Image.Plane#getRowStride() vPlane.getRowStride()} and
* {@link android.media.Image.Plane#getPixelStride() uPlane.getPixelStride()}
* == {@link android.media.Image.Plane#getPixelStride() vPlane.getPixelStride()};
* ).
*
* For example, the {@link android.media.Image} object can provide data
* in this format from a {@link android.media.MediaCodec}
* through {@link android.media.MediaCodec#getOutputImage} object.
*
* @see android.media.Image
* @see android.media.MediaCodec
*/
public static final int YUV_444_888 = 0x28;
/**
* Multi-plane Android RGB format
*
* This format is a generic RGB format, capable of describing most RGB formats,
* with 8 bits per color sample.
*
* Images in this format are always represented by three separate buffers
* of data, one for each color plane. Additional information always
* accompanies the buffers, describing the row stride and the pixel stride
* for each plane.
*
* The order of planes in the array returned by
* {@link android.media.Image#getPlanes() Image#getPlanes()} is guaranteed such that
* plane #0 is always R (red), plane #1 is always G (green), and plane #2 is always B
* (blue).
*
* All three planes are guaranteed to have the same row strides and pixel strides.
*
* For example, the {@link android.media.Image} object can provide data
* in this format from a {@link android.media.MediaCodec}
* through {@link android.media.MediaCodec#getOutputImage} object.
*
* @see android.media.Image
* @see android.media.MediaCodec
*/
public static final int FLEX_RGB_888 = 0x29;
/**
* Multi-plane Android RGBA format
*
* This format is a generic RGBA format, capable of describing most RGBA formats,
* with 8 bits per color sample.
*
* Images in this format are always represented by four separate buffers
* of data, one for each color plane. Additional information always
* accompanies the buffers, describing the row stride and the pixel stride
* for each plane.
*
* The order of planes in the array returned by
* {@link android.media.Image#getPlanes() Image#getPlanes()} is guaranteed such that
* plane #0 is always R (red), plane #1 is always G (green), plane #2 is always B (blue),
* and plane #3 is always A (alpha). This format may represent pre-multiplied or
* non-premultiplied alpha.
*
* All four planes are guaranteed to have the same row strides and pixel strides.
*
* For example, the {@link android.media.Image} object can provide data
* in this format from a {@link android.media.MediaCodec}
* through {@link android.media.MediaCodec#getOutputImage} object.
*
* @see android.media.Image
* @see android.media.MediaCodec
*/
public static final int FLEX_RGBA_8888 = 0x2A;
/**
* General raw camera sensor image format, usually representing a
* single-channel Bayer-mosaic image. Each pixel color sample is stored with
* 16 bits of precision.
*
* The layout of the color mosaic, the maximum and minimum encoding
* values of the raw pixel data, the color space of the image, and all other
* needed information to interpret a raw sensor image must be queried from
* the {@link android.hardware.camera2.CameraDevice} which produced the
* image.
*/
public static final int RAW_SENSOR = 0x20;
/**
* Private raw camera sensor image format, a single channel image with
* implementation depedent pixel layout.
*
* RAW_PRIVATE is a format for unprocessed raw image buffers coming from an
* image sensor. The actual structure of buffers of this format is
* implementation-dependent.
*
*/
public static final int RAW_PRIVATE = 0x24;
/**
*
* Android 10-bit raw format
*
*
* This is a single-plane, 10-bit per pixel, densely packed (in each row),
* unprocessed format, usually representing raw Bayer-pattern images coming
* from an image sensor.
*
*
* In an image buffer with this format, starting from the first pixel of
* each row, each 4 consecutive pixels are packed into 5 bytes (40 bits).
* Each one of the first 4 bytes contains the top 8 bits of each pixel, The
* fifth byte contains the 2 least significant bits of the 4 pixels, the
* exact layout data for each 4 consecutive pixels is illustrated below
* ({@code Pi[j]} stands for the jth bit of the ith pixel):
*
*
*
*
*
* bit 7
* bit 6
* bit 5
* bit 4
* bit 3
* bit 2
* bit 1
* bit 0
*
*
*
* Byte 0:
* P0[9]
* P0[8]
* P0[7]
* P0[6]
* P0[5]
* P0[4]
* P0[3]
* P0[2]
*
*
* Byte 1:
* P1[9]
* P1[8]
* P1[7]
* P1[6]
* P1[5]
* P1[4]
* P1[3]
* P1[2]
*
*
* Byte 2:
* P2[9]
* P2[8]
* P2[7]
* P2[6]
* P2[5]
* P2[4]
* P2[3]
* P2[2]
*
*
* Byte 3:
* P3[9]
* P3[8]
* P3[7]
* P3[6]
* P3[5]
* P3[4]
* P3[3]
* P3[2]
*
*
* Byte 4:
* P3[1]
* P3[0]
* P2[1]
* P2[0]
* P1[1]
* P1[0]
* P0[1]
* P0[0]
*
*
*
*
* This format assumes
*
* - a width multiple of 4 pixels
* - an even height
*
*
*
* size = row stride * height
where the row stride is in bytes,
* not pixels.
*
*
* Since this is a densely packed format, the pixel stride is always 0. The
* application must use the pixel data layout defined in above table to
* access each row data. When row stride is equal to {@code width * (10 / 8)}, there
* will be no padding bytes at the end of each row, the entire image data is
* densely packed. When stride is larger than {@code width * (10 / 8)}, padding
* bytes will be present at the end of each row.
*
*
* For example, the {@link android.media.Image} object can provide data in
* this format from a {@link android.hardware.camera2.CameraDevice} (if
* supported) through a {@link android.media.ImageReader} object. The
* {@link android.media.Image#getPlanes() Image#getPlanes()} will return a
* single plane containing the pixel data. The pixel stride is always 0 in
* {@link android.media.Image.Plane#getPixelStride()}, and the
* {@link android.media.Image.Plane#getRowStride()} describes the vertical
* neighboring pixel distance (in bytes) between adjacent rows.
*
*
* @see android.media.Image
* @see android.media.ImageReader
* @see android.hardware.camera2.CameraDevice
*/
public static final int RAW10 = 0x25;
/**
*
* Android 12-bit raw format
*
*
* This is a single-plane, 12-bit per pixel, densely packed (in each row),
* unprocessed format, usually representing raw Bayer-pattern images coming
* from an image sensor.
*
*
* In an image buffer with this format, starting from the first pixel of each
* row, each two consecutive pixels are packed into 3 bytes (24 bits). The first
* and second byte contains the top 8 bits of first and second pixel. The third
* byte contains the 4 least significant bits of the two pixels, the exact layout
* data for each two consecutive pixels is illustrated below (Pi[j] stands for
* the jth bit of the ith pixel):
*
*
*
*
*
* bit 7
* bit 6
* bit 5
* bit 4
* bit 3
* bit 2
* bit 1
* bit 0
*
*
*
* Byte 0:
* P0[11]
* P0[10]
* P0[ 9]
* P0[ 8]
* P0[ 7]
* P0[ 6]
* P0[ 5]
* P0[ 4]
*
*
* Byte 1:
* P1[11]
* P1[10]
* P1[ 9]
* P1[ 8]
* P1[ 7]
* P1[ 6]
* P1[ 5]
* P1[ 4]
*
*
* Byte 2:
* P1[ 3]
* P1[ 2]
* P1[ 1]
* P1[ 0]
* P0[ 3]
* P0[ 2]
* P0[ 1]
* P0[ 0]
*
*
*
*
* This format assumes
*
* - a width multiple of 4 pixels
* - an even height
*
*
*
* size = row stride * height
where the row stride is in bytes,
* not pixels.
*
*
* Since this is a densely packed format, the pixel stride is always 0. The
* application must use the pixel data layout defined in above table to
* access each row data. When row stride is equal to {@code width * (12 / 8)}, there
* will be no padding bytes at the end of each row, the entire image data is
* densely packed. When stride is larger than {@code width * (12 / 8)}, padding
* bytes will be present at the end of each row.
*
*
* For example, the {@link android.media.Image} object can provide data in
* this format from a {@link android.hardware.camera2.CameraDevice} (if
* supported) through a {@link android.media.ImageReader} object. The
* {@link android.media.Image#getPlanes() Image#getPlanes()} will return a
* single plane containing the pixel data. The pixel stride is always 0 in
* {@link android.media.Image.Plane#getPixelStride()}, and the
* {@link android.media.Image.Plane#getRowStride()} describes the vertical
* neighboring pixel distance (in bytes) between adjacent rows.
*
*
* @see android.media.Image
* @see android.media.ImageReader
* @see android.hardware.camera2.CameraDevice
*/
public static final int RAW12 = 0x26;
/**
* Android dense depth image format.
*
* Each pixel is 16 bits, representing a depth ranging measurement from a depth camera or
* similar sensor. The 16-bit sample consists of a confidence value and the actual ranging
* measurement.
*
* The confidence value is an estimate of correctness for this sample. It is encoded in the
* 3 most significant bits of the sample, with a value of 0 representing 100% confidence, a
* value of 1 representing 0% confidence, a value of 2 representing 1/7, a value of 3
* representing 2/7, and so on.
*
* As an example, the following sample extracts the range and confidence from the first pixel
* of a DEPTH16-format {@link android.media.Image}, and converts the confidence to a
* floating-point value between 0 and 1.f inclusive, with 1.f representing maximum confidence:
*
*
* ShortBuffer shortDepthBuffer = img.getPlanes()[0].getBuffer().asShortBuffer();
* short depthSample = shortDepthBuffer.get()
* short depthRange = (short) (depthSample & 0x1FFF);
* short depthConfidence = (short) ((depthSample >> 13) & 0x7);
* float depthPercentage = depthConfidence == 0 ? 1.f : (depthConfidence - 1) / 7.f;
*
*
*
* This format assumes
*
* - an even width
* - an even height
* - a horizontal stride multiple of 16 pixels
*
*
*
* y_size = stride * height
*
* When produced by a camera, the units for the range are millimeters.
*/
public static final int DEPTH16 = 0x44363159;
/**
* Android sparse depth point cloud format.
*
* A variable-length list of 3D points plus a confidence value, with each point represented
* by four floats; first the X, Y, Z position coordinates, and then the confidence value.
*
* The number of points is {@code (size of the buffer in bytes) / 16}.
*
*
The coordinate system and units of the position values depend on the source of the point
* cloud data. The confidence value is between 0.f and 1.f, inclusive, with 0 representing 0%
* confidence and 1.f representing 100% confidence in the measured position values.
*
* As an example, the following code extracts the first depth point in a DEPTH_POINT_CLOUD
* format {@link android.media.Image}:
*
* FloatBuffer floatDepthBuffer = img.getPlanes()[0].getBuffer().asFloatBuffer();
* float x = floatDepthBuffer.get();
* float y = floatDepthBuffer.get();
* float z = floatDepthBuffer.get();
* float confidence = floatDepthBuffer.get();
*
*
*/
public static final int DEPTH_POINT_CLOUD = 0x101;
/**
* Android private opaque image format.
*
* The choices of the actual format and pixel data layout are entirely up to
* the device-specific and framework internal implementations, and may vary
* depending on use cases even for the same device. The buffers of this
* format can be produced by components like
* {@link android.media.ImageWriter ImageWriter} , and interpreted correctly
* by consumers like {@link android.hardware.camera2.CameraDevice
* CameraDevice} based on the device/framework private information. However,
* these buffers are not directly accessible to the application.
*
*
* When an {@link android.media.Image Image} of this format is obtained from
* an {@link android.media.ImageReader ImageReader} or
* {@link android.media.ImageWriter ImageWriter}, the
* {@link android.media.Image#getPlanes() getPlanes()} method will return an
* empty {@link android.media.Image.Plane Plane} array.
*
*
* If a buffer of this format is to be used as an OpenGL ES texture, the
* framework will assume that sampling the texture will always return an
* alpha value of 1.0 (i.e. the buffer contains only opaque pixel values).
*
*/
public static final int PRIVATE = 0x22;
/**
* Use this function to retrieve the number of bits per pixel of an
* ImageFormat.
*
* @param format
* @return the number of bits per pixel of the given format or -1 if the
* format doesn't exist or is not supported.
*/
public static int getBitsPerPixel(int format) {
switch (format) {
case RGB_565:
return 16;
case NV16:
return 16;
case YUY2:
return 16;
case YV12:
return 12;
case Y8:
return 8;
case Y16:
case DEPTH16:
return 16;
case NV21:
return 12;
case YUV_420_888:
return 12;
case YUV_422_888:
return 16;
case YUV_444_888:
return 24;
case FLEX_RGB_888:
return 24;
case FLEX_RGBA_8888:
return 32;
case RAW_SENSOR:
return 16;
case RAW10:
return 10;
case RAW12:
return 12;
}
return -1;
}
/**
* Determine whether or not this is a public-visible {@code format}.
*
* In particular, {@code @hide} formats will return {@code false}.
*
* Any other formats (including UNKNOWN) will return {@code false}.
*
* @param format an integer format
* @return a boolean
*
* @hide
*/
public static boolean isPublicFormat(int format) {
switch (format) {
case RGB_565:
case NV16:
case YUY2:
case YV12:
case JPEG:
case NV21:
case YUV_420_888:
case YUV_422_888:
case YUV_444_888:
case FLEX_RGB_888:
case FLEX_RGBA_8888:
case RAW_SENSOR:
case RAW_PRIVATE:
case RAW10:
case RAW12:
case DEPTH16:
case DEPTH_POINT_CLOUD:
case PRIVATE:
return true;
}
return false;
}
}