org.scalactic.Or.scala Maven / Gradle / Ivy

Go to download
Show more of this group Show more artifacts with this name
Show all versions of scalatest-app_3 Show documentation
scalatest-app
The newest version!
/*
 * Copyright 2001-2013 Artima, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
package org.scalactic

import scala.util.Try
import scala.util.Success
import scala.util.Failure
import scala.util.control.NonFatal
import scala.collection.GenTraversableOnce
import scala.collection.generic.CanBuildFrom
import scala.collection.mutable.Builder

/**
 * Represents a value that is one of two possible types, with one type being “good” and
 * the other “bad.”
 *
 * 
 * An Or will either be a “good” value wrapped in an instance of
 * Good or a “bad” value wrapped in an instance
 * of Bad.
 * 
 *
 * The motivation for Or
 *
 * 
 * Or differs from Scala's Either type in that
 * Either treats both its Left and Right alternatives in an identical manner, whereas
 * Or treats its two alternatives differently: it favors
 * Good over Bad.
 * Because of this, it is more convenient to work with Ors
 * when you prefer one alternative over the other; for example, if one alternative represents a valid result
 * and another represents an error.
 * 
 *
 * 
 * To illustrate, imagine you want to create instances this Person class from user input strings:
 * 
 *
 *  * case class Person(name: String, age: Int)
 * 
 *
 * 
 * You might write a method that parses the name from user input string and returns an
 * Option[String]: None if the string is empty or blank, else the
 * trimmed string wrapped in a Some:
 * 
 * 
 *  * def parseName(input: String): Option[String] = {
 *   val trimmed = input.trim
 *   if (!trimmed.isEmpty) Some(trimmed) else None
 * }
 * 
 *
 * 
 * You might also write a method that parses the age from user input string and returns an
 * Option[Int]: None if either the string is not a valid integer or
 * it is a negative integer, else the string converted to an integer wrapped in a Some:
 * 
 * 
 *  * def parseAge(input: String): Option[Int] = {
 *   try { 
 *     val age = input.trim.toInt
 *     if (age >= 0) Some(age) else None
 *   }
 *   catch {
 *     case _: NumberFormatException => None
 *   }
 * }
 * 
 *
 * 
 * With these building blocks you could write a method that parses name and age input
 * strings and returns either a Person, wrapped in a Some, or
 * None if either the name or age, or both, was invalid:
 * 
 *
 *  * def parsePerson(inputName: String, inputAge: String): Option[Person] =
 *   for {
 *     name <- parseName(inputName)
 *     age <- parseAge(inputAge)
 *   } yield Person(name, age)
 * 
 *
 * 
 * Here are some examples of invoking parsePerson:
 * 
 *
 *  * parsePerson("Bridget Jones", "29")
 * // Result: Some(Person(Bridget Jones,29))
 *
 * parsePerson("Bridget Jones", "")
 * // Result: None
 *
 * parsePerson("Bridget Jones", "-29")
 * // Result: None
 *
 * parsePerson("", "")
 * // Result: None
 * 
 *
 * 
 * Now imagine you want to give an error message back if the user's input is invalid.
 * You might rewrite the parsing methods to return an Either instead. In this
 * case, the desired result is a valid name or age, which by convention should be placed
 * on the right of the Either. The left will be a String error
 * message. Here's the new parseName function, which returns an Either[String, String]:
 * 
 *
 *  * def parseName(input: String): Either[String, String] = {
 *   val trimmed = input.trim
 *   if (!trimmed.isEmpty) Right(trimmed) else Left(s""""${input}" is not a valid name""")
 * }
 * 
 *
 * 
 * And here's the new parseAge function, which returns an Either[String, Int]:
 * 
 *
 *  * def parseAge(input: String): Either[String, Int] = {
 *   try {
 *     val age = input.trim.toInt
 *     if (age >= 0) Right(age) else Left(s""""${age}" is not a valid age""")
 *   }
 *   catch {
 *     case _: NumberFormatException => Left(s""""${input}" is not a valid integer""")
 *   }
 * }
 * 
 *
 * 
 * The new parsePerson method will return an Either[String, Person]:
 * 
 *
 *  * def parsePerson(inputName: String, inputAge: String): Either[String, Person] =
 *   for {
 *     name <- parseName(inputName).right
 *     age <- parseAge(inputAge).right
 *   } yield Person(name, age)
 * 
 * 
 * 
 * Note that Either requires you to add .right
 * at the end of each generator in the for expression. Although the convention is to place the
 * valid result on the right, you must explicitly (and repetitively) indicate that you've done so by transforming
 * the Either to a RightProjection by invoking .right at each step. 
 * Given this implementation, the parsePerson method will now short-circuit at the first sign
 * of trouble (as it did when we used an Option), but you now get the first error message returned
 * in a Left. Here are some examples:
 * 
 *
 *  * parsePerson("Bridget Jones", "29")
 * // Result: Right(Person(Bridget Jones,29))
 *
 * parsePerson("Bridget Jones", "")
 * // Result: Left("" is not a valid integer)
 *
 * parsePerson("Bridget Jones", "-29")
 * // Result: Left("-29" is not a valid age)
 *
 * parsePerson("", "")
 * // Result: Left("" is not a valid name)
 * 
 *
 * An Either with “attitude”
 *
 * 
 * Because Or declares one alternative to be “good” and the other “bad,”
 * it is more convenient than Either in this kind of situation. One difference to note with
 * Or is that the Good alternative is on the left, Bad on the right.
 * The reason is that Or is designed to be written using infix notation, and placing the
 * “happy path” first is more readable. For example, instead of writing:
 * 
 *
 *  * Or[Int, ErrorMessage]
 * 
 *
 * 
 * You can write:
 * 
 *
 *  * Int Or ErrorMessage
 * 
 *
 * 
 * Here's how the parseName method might be written using an Or, where
 * ErrorMessage is a type alias for String declared in the org.scalactic
 * package object:
 * 
 *
 *  * import org.scalactic._
 *
 * def parseName(input: String): String Or ErrorMessage = {
 *   val trimmed = input.trim
 *   if (!trimmed.isEmpty) Good(trimmed) else Bad(s""""${input}" is not a valid name""")
 * }
 * 
 *
 * 
 * You can think of the String Or ErrorMessage result
 * type like this:
 * 
 *
 * 
 * The parseName method will return a name String or, if the input string
 * is not a valid name, an ErrorMessage.
 * 
 *
 * 
 * Here's how the parseAge method might be written:
 * 
 *
 *  * def parseAge(input: String): Int Or ErrorMessage = {
 *   try {
 *     val age = input.trim.toInt
 *     if (age >= 0) Good(age) else Bad(s""""${age}" is not a valid age""")
 *   }
 *   catch {
 *     case _: NumberFormatException => Bad(s""""${input}" is not a valid integer""")
 *   }
 * }
 * 
 *
 * 
 * Given these implementations, here's how you'd write the parsePerson method:
 * 
 *
 *  * def parsePerson(inputName: String, inputAge: String): Person Or ErrorMessage =
 *   for {
 *     name <- parseName(inputName)
 *     age <- parseAge(inputAge)
 *   } yield Person(name, age)
 * 
 *
 * 
 * Because of Or's attitude, you need not write .good at the end of
 * each generator. Or will keep going so long as each step produces a Good,
 * short circuiting at the first sign of a Bad. Here are a few invocations of this
 * parsePerson method:
 * 
 *
 *  * parsePerson("Bridget Jones", "29")
 * // Result: Good(Person(Bridget Jones,29))
 *
 * parsePerson("Bridget Jones", "")
 * // Result: Bad("" is not a valid integer)
 *
 * parsePerson("Bridget Jones", "-29")
 * // Result: Bad("-29" is not a valid age)
 *
 * parsePerson("", "")
 * // Result: Bad("" is not a valid name)
 * 
 *
 * 
 * Accumulating errors with Or
 *
 * 
 * Another difference between Or and Either is that Or enables
 * you to accumulate errors if the Bad type is an Every.
 * An Every is similar to a Seq in that it contains ordered elements, but
 * different from Seq in that it cannot be empty. An Every is
 * either a One,
 * which contains one and only one element, or a Many, which contains two or
 * more elements.
 * 
 *
 * 
 * Note: an Or whose Bad type is an Every, or one of its subtypes,
 * is called an “accumulating Or.”
 * 
 *
 * 
 * To rewrite the previous example so that errors can be accumulated, you need first to return an Every
 * as the Bad type. Here's how you'd change the parseName method:
 * 
 *
 *  * def parseName(input: String): String Or One[ErrorMessage] = {
 *   val trimmed = input.trim
 *   if (!trimmed.isEmpty) Good(trimmed) else Bad(One(s""""${input}" is not a valid name"""))
 * }
 * 
 *
 * 
 * Because parseName will either return a valid name String wrapped in a 
 * Good, or one error message, wrapped in a Bad, you would write the
 * Bad type as One[ErrorMessage]. The same is true for parseAge:
 * 
 *
 *  * def parseAge(input: String): Int Or One[ErrorMessage] = {
 *   try {
 *     val age = input.trim.toInt
 *     if (age >= 0) Good(age) else Bad(One(s""""${age}" is not a valid age"""))
 *   }
 *   catch {
 *     case _: NumberFormatException => Bad(One(s""""${input}" is not a valid integer"""))
 *   }
 * }
 * 
 *
 * 
 * Because a for expression short-circuits on the first Bad encountered, you'll
 * need to use a different approach to write the parsePerson method. In this example, the
 * withGood method from trait Accumulation
 * will do the trick:
 * 
 *
 *  * import Accumulation._
 * 
 * def parsePerson(inputName: String, inputAge: String): Person Or Every[ErrorMessage] = {
 *   val name = parseName(inputName)
 *   val age = parseAge(inputAge)
 *   withGood(name, age) { Person(_, _) }
 * }
 * 
 *
 * 
 * Trait Accumulation offers overloaded withGood methods that take 1 to
 * 22 accumulating Ors, plus a function taking the same number of corresponding
 * Good values.  In this example, if both name and age are
 * Goods, the withGood method will pass the good name String
 * and age Int to the Person(_, _) function, and return the resulting Person
 * object wrapped in a Good. If either name and age, or both,
 * are Bad, withGood will return the accumulated errors in a Bad.
 * 
 *
 * 
 * The result of parsePerson, if Bad, will therefore contain either one or two
 * error messages, i.e., the result will either be a One or a Many.
 * As a result, the result type of parsePerson must be Person Or
 * Every[ErrorMessage]. Regardless of whether a Bad result contains one
 * or two error messages, it will contain every error message. Here's some invocations of
 * this accumulating version of parsePerson:
 * 
 *
 *  * parsePerson("Bridget Jones", "29")
 * // Result: Good(Person(Bridget Jones,29))
 *
 * parsePerson("Bridget Jones", "")
 * // Result: Bad(One("" is not a valid integer))
 *
 * parsePerson("Bridget Jones", "-29")
 * // Result: Bad(One("-29" is not a valid age))
 *
 * parsePerson("", "")
 * // Result: Bad(Many("" is not a valid name, "" is not a valid integer))
 * 
 *
 * 
 * Note that in the last example, the Bad contains an error message for both name and age.
 * 
 *
 * Other ways to accumulate errors

 * 
 * The Accumlation trait also enables other ways of accumulating errors.
 * 
 *
 * 
 * Using combined
 *
 * 
 * If you have a collection of
 * accumulating Ors, for example, you can combine them into one Or using combined, like this:
 * 
 *
 *  * List(parseAge("29"), parseAge("30"), parseAge("31")).combined
 * // Result: Good(List(29, 30, 31))
 *
 * List(parseAge("29"), parseAge("-30"), parseAge("31")).combined
 * // Result: Bad(One("-30" is not a valid age))
 *
 * List(parseAge("29"), parseAge("-30"), parseAge("-31")).combined
 * // Result: Bad(Many("-30" is not a valid age, "-31" is not a valid age))
 * 
 *
 * 
 * Using validatedBy
 *
 * 
 * Or if you have a collection of values and a function that transforms that type of value into an accumulating
 * Ors, you can validate the values using the function using validatedBy, like this:
 * 
 *
 *  * List("29", "30", "31").validatedBy(parseAge)
 * // Result: Good(List(29, 30, 31))
 *
 * List("29", "-30", "31").validatedBy(parseAge)
 * // Result: Bad(One("-30" is not a valid age))
 *
 * List("29", "-30", "-31").validatedBy(parseAge)
 * // Result: Bad(Many("-30" is not a valid age, "-31" is not a valid age))
 * 
 *
 * 
 * Using zip
 *
 * 
 * You can also zip two accumulating Ors together. If both are Good, you'll get a 
 * Good tuple containin both original Good values. Otherwise, you'll get a Bad
 * containing every error message. Here are some examples:
 * 
 *
 *  * parseName("Dude") zip parseAge("21")
 * // Result: Good((Dude,21))
 *
 * parseName("Dude") zip parseAge("-21")
 * // Result: Bad(One("-21" is not a valid age))
 *
 * parseName("") zip parseAge("-21")
 * // Result: Bad(Many("" is not a valid name, "-21" is not a valid age))
 * 
 *
 * 
 * Using when
 *
 * 
 * In addition, given an accumlating Or, you can pass one or more validation functions to when on the Or
 * to submit that Or to further scrutiny. A validation function accepts a Good type and returns a Validation[E],
 * where E is the type in the Every in the Bad type. For an Int Or One[ErrorMessage], for example
 * the validation function type would be Int => Validation[ErrorMessage]. Here are a few examples:
 * 
 *
 *  * def isRound(i: Int): Validation[ErrorMessage] =
 *   if (i % 10 == 0) Pass else Fail(i + " was not a round number")
 *
 * def isDivBy3(i: Int): Validation[ErrorMessage] =
 *   if (i % 3 == 0) Pass else Fail(i + " was not divisible by 3")
 * 
 * 
 * 
 * If the Or on which you call when is already Bad, you get the same (Bad) Or back, because
 * no Good value exists to pass to the valiation functions:
 * 
 * 
 *  * parseAge("-30").when(isRound, isDivBy3)
 * // Result: Bad(One("-30" is not a valid age))
 * 
 *
 * 
 * If the Or on which you call when is Good, and also passes all the validation functions (i.e., the
 * all return None), you again get the same Or back, but this time, a Good one:
 * 
 * 
 *  * parseAge("30").when(isRound, isDivBy3)
 * // Result: Good(30)
 * 
 *
 * 
 * If one or more of the validation functions fails, however, you'll get a Bad back contining every error. Here are some examples:
 * 
 * 
 *  * parseAge("33").when(isRound, isDivBy3)
 * // Result: Bad(One(33 was not a round number))
 *
 * parseAge("20").when(isRound, isDivBy3)
 * // Result: Bad(One(20 was not divisible by 3))
 *
 * parseAge("31").when(isRound, isDivBy3)
 * // Result: Bad(Many(31 was not a round number, 31 was not divisible by 3))
 * 
 *
 * 
 * Note that you can use when to accumulate errors in a for expression involving an accumulating Or, like this:
 * 
 *
 *  * for (age <- parseAge("-30") when (isRound, isDivBy3)) yield age
 * // Result: Bad(One("-30" is not a valid age))
 *
 * for (age <- parseAge("30") when (isRound, isDivBy3)) yield age
 * // Result: Good(30)
 *
 * for (age <- parseAge("33") when (isRound, isDivBy3)) yield age
 * // Result: Bad(One(33 was not a round number))
 *
 * for (age <- parseAge("20") when (isRound, isDivBy3)) yield age
 * // Result: Bad(One(20 was not divisible by 3))
 *
 * for (age <- parseAge("31") when (isRound, isDivBy3)) yield age
 * // Result: Bad(Many(31 was not a round number, 31 was not divisible by 3))
 * 
 *
 * Much ado about Nothing
 *
 * 
 * Because Or has two types, but each of its two subtypes only takes a value of one or the other type, the Scala compiler will
 * infer Nothing for the unspecified type:
 * 
 *
 *  * scala> Good(3)
 * res0: org.scalactic.Good[Int,Nothing] = Good(3)
 *
 * scala> Bad("oops")
 * res1: org.scalactic.Bad[Nothing,String] = Bad(oops)
 * 
 *
 * 
 * Often Nothing will work fine, as it will be widened as soon as the compiler encounters a more specific type.
 * Sometimes, however, you may need to specify it. In such situations you can use this syntax:
 * 
 *
 *  * scala> Good(3).orBad[String]
 * res2: org.scalactic.Good[Int,String] = Good(3)
 *
 * scala> Good[Int].orBad("oops")
 * res3: org.scalactic.Bad[Int,String] = Bad(oops)
 * 
 *
 * 
 * If you want to specify both types, because you don't like the inferred type, you can do so like this:
 * 
 *
 *  * scala> Good[AnyVal, String](3)
 * res4: org.scalactic.Good[AnyVal,String] = Good(3)
 *
 * scala> Bad[Int, ErrorMessage]("oops")
 * res5: org.scalactic.Bad[Int,org.scalactic.ErrorMessage] = Bad(oops)
 * 
 *
 * 
 * But you may find the code is clearer if you instead use a type ascription, like this:
 * 
 *
 *  * scala> Good(3): AnyVal Or String
 * res6: org.scalactic.Or[AnyVal,String] = Good(3)
 *
 * scala> Bad("oops"): Int Or ErrorMessage
 * res7: org.scalactic.Or[Int,org.scalactic.ErrorMessage] = Bad(oops)
 * 
 *
 * 
 * Note: The Or hierarchy was inspired in part by the disjoint union (\/) and Validation types of
 * scalaz, the ProcessResult type of
 * Typesafe Activator, and the Result type of
 * ScalaKittens.
 * 
 */
infix  
sealed abstract class Or[+G,+B] extends Product with Serializable {

  /**
   * Indicates whether this Or is a Good
   *
   * @return true if this Or is a Good, false if it is a Bad.
   */
  val isGood: Boolean = false

  /**
   * Indicates whether this Or is a Bad
   *
   * @return true if this Or is a Bad, false if it is a Good.
   */
  val isBad: Boolean = false

  /**
   * Returns the Or's value if it is a Good or throws NoSuchElementException if it is a Bad.
   *
   * @return the contained value if this is a Good
   * @throws NoSuchElementException if this is a Bad
   */
  def get: G

  /**
   * Maps the given function to this Or's value if it is a Good or returns this if it is a Bad.
   *
   * @param f the function to apply
   * @return if this is a Good, the result of applying the given function to the contained value wrapped in a Good,
   *         else this Bad is returned
   */
  def map[H](f: G => H): H Or B

  /**
   * Maps the given function to this Or's value if it is a Bad or returns this if it is a Good.
   *
   * @param f the function to apply
   * @return if this is a Bad, the result of applying the given function to the contained value wrapped in a Bad,
   *         else this Good is returned
   */
  def badMap[C](f: B => C): G Or C

  /**
   * Maps the given function to this Or's value if it is a Bad, transforming it into a Good, or returns
   * this if it is already a Good.
   *
   * @param f the function to apply
   * @return if this is a Bad, the result of applying the given function to the contained value wrapped in a Good,
   *         else this Good is returned
   */
  def recover[H >: G](f: B => H): H Or B

  /**
   * Maps the given function to this Or's value if it is a Bad, returning the result, or returns
   * this if it is already a Good.
   *
   * @param f the function to apply
   * @return if this is a Bad, the result of applying the given function to the contained value,
   *         else this Good is returned
   */
  def recoverWith[H >: G, C](f: B => H Or C): H Or C

  /**
   * Applies the given function f to the contained value if this Or is a Good; does nothing if this Or
   * is a Bad.
   *
   * @param f the function to apply
   */
  def foreach(f: G => Unit): Unit

  /**
   * Returns the given function applied to the value contained in this Or if it is a Good,
   * or returns this if it is a Bad.
   *
   * @param f the function to apply
   * @return if this is a Good, the result of applying the given function to the contained value wrapped in a Good,
   *         else this Bad is returned
   */
  def flatMap[H, C >: B](f: G => H Or C): H Or C

  /**
   * Returns this Or if either 1) it is a Bad or 2) it is a Good and applying the validation function f to this
   * Good's value returns Pass; otherwise, 
   * returns a new Bad containing the error value contained in the Fail resulting from applying the validation
   * function f to this Good's value.
   *
   * 
   * For examples of filter used in for expressions, see the main documentation for trait
   * Validation.
   * 
   *
   * @param f the validation function to apply
   * @return a Good if this Or is a Good that passes the validation function, else a Bad.
   */
  def filter[C >: B](f: G => Validation[C]): G Or C

  // TODO: What should we do about withFilter. Good question for the hackathon.
  /**
   * Currently just forwards to filter, and therefore, returns the same result.
   */
  def withFilter[C >: B](f: G => Validation[C]): G Or C = filter(f)

  /**
   * Returns true if this Or is a Good and the predicate p returns true when applied to this Good's value.
   *
   * 
   * Note: The exists method will return the same result as forall if this Or is a Good, but the opposite
   * result if this Or is a Bad.
   * 
   *
   * @param p the predicate to apply to the Good value, if this is a Good
   * @return the result of applying the passed predicate p to the Good value, if this is a Good, else false
   */
  def exists(p: G => Boolean): Boolean

  /**
   * Returns true if either this Or is a Bad or if the predicate p returns true when applied
   * to this Good's value.
   *
   * 
   * Note: The forall method will return the same result as exists if this Or is a Good, but the opposite
   * result if this Or is a Bad.
   * 
   *
   * @param p the predicate to apply to the Good value, if this is a Good
   * @return the result of applying the passed predicate p to the Good value, if this is a Good, else true
   */
  def forall(f: G => Boolean): Boolean

  /**
   * Returns, if this Or is Good, this Good's value; otherwise returns the result of evaluating default. 
   *
   * @param default the default expression to evaluate if this Or is a Bad
   * @return the contained value, if this Or is a Good, else the result of evaluating the given default
   */
  def getOrElse[H >: G](default: => H): H

  /**
   * Returns this Or if it is a Good, otherwise returns the result of evaluating the passed alternative.
   *
   * @param alternative the alternative by-name to evaluate if this Or is a Bad
   * @return this Or, if it is a Good, else the result of evaluating alternative
   */
  def orElse[H >: G, C >: B](alternative: => H Or C): H Or C

  /**
   * Returns a Some containing the Good value, if this Or is a Good, else None.
   *
   * @return the contained “good” value wrapped in a Some, if this Or is a Good; None
   *     if this Or is a Bad.
   */
  def toOption: Option[G]

  /**
   * Returns an immutable IndexedSeq containing the Good value, if this Or is a Good, else an empty
   * immutable IndexedSeq.
   *
   * @return the contained “good” value in a lone-element Seq if this Or is a Good; an empty Seq if
   *     this Or is a Bad.
   */
  def toSeq: scala.collection.immutable.IndexedSeq[G]

  /**
   * Returns an Either: a Right containing the Good value, if this is a Good; a Left
   * containing the Bad value, if this is a Bad.
   *
   * 
   * Note that values effectively “switch sides” when convering an Or to an Either. If the type of the
   * Or on which you invoke toEither is Or[Int, ErrorMessage] for example, the result will be an
   * Either[ErrorMessage, Int]. The reason is that the convention for Either is that Left is used for “bad”
   * values and Right is used for “good” ones.
   * 
   *
   * @return this Good value, wrapped in a Right, or this Bad value, wrapped in a Left.
   */
  def toEither: Either[B, G]

  /**
   * Converts this Or to an Or with the same Good type and a Bad type consisting of
   * One parameterized by this Or's Bad type.
   *
   * 
   * For example, invoking the accumulating method on an Int Or ErrorMessage would convert it to an
   * Int Or One[ErrorMessage]. This result type, because the Bad type is an Every, can be used
   * with the mechanisms provided in trait Accumulation to accumulate errors.
   * 

   *
   * 

   * Note that if this Or is already an accumulating Or, the behavior of this accumulating method does not change.
   * For example, if you invoke accumulating on an Int Or One[ErrorMessage] you will be rewarded with an
   * Int Or One[One[ErrorMessage]].
   * 
   *
   * @return this Good, if this Or is a Good; or this Bad value wrapped in a One if
   *     this Or is a Bad.
   */
  def accumulating: G Or One[B]

  /**
   * Returns a Try: a Success containing the
   * Good value, if this is a Good; a Failure
   * containing the Bad value, if this is a Bad.
   *
   * 
   * Note: This method can only be called if the Bad type of this Or is a subclass
   * of Throwable (or Throwable itself).
   * 
   *
   * 
   * Note that values effectively “switch sides” when converting an Or to an Either. If the type of the
   * Or on which you invoke toEither is Or[Int, ErrorMessage] for example, the result will be an
   * Either[ErrorMessage, Int]. The reason is that the convention for Either is that Left is used for “bad”
   * values and Right is used for “good” ones.
   * 
   *
   * @return this Good value, wrapped in a Right, or this Bad value, wrapped in a Left.
   */
  def toTry(implicit ev: B <:< Throwable): Try[G]

  /**
   * Returns an Or with the Good and Bad types swapped: Bad becomes Good and Good
   * becomes Bad.
   *
   * 
   * Here's an example:
   * 
   *
   *    * scala> val lyrics = Bad("Hey Jude, don't make it bad. Take a sad song and make it better.")
   * lyrics: org.scalactic.Bad[Nothing,String] =
   *     Bad(Hey Jude, don't make it bad. Take a sad song and make it better.)
   *
   * scala> lyrics.swap
   * res12: org.scalactic.Or[String,Nothing] =
   *     Good(Hey Jude, don't make it bad. Take a sad song and make it better.)
   * 
   *
   * 
   * Now that song will be rolling around in your head all afternoon. But at least it is a good song (thanks to swap).
   * 
   *
   * @return if this Or is a Good, its Good value wrapped in a Bad; if this Or is
   *     a Bad, its Bad value wrapped in a Good.
   */
  def swap: B Or G

  /**
   * Transforms this Or by applying the function gf to this Or's Good value if it is a Good,
   * or by applying bf to this Or's Bad value if it is a Bad.
   *
   * @param gf the function to apply to this Or's Good value, if it is a Good
   * @param bf the function to apply to this Or's Bad value, if it is a Bad
   * @return the result of applying the appropriate one of the two passed functions, gf or bf, to this Or's value
   */
  def transform[H, C](gf: G => H Or C, bf: B => H Or C): H Or C

  /**
   * Folds this Or into a value of type V by applying the given gf function if this is
   * a Good else the given bf function if this is a Bad.
   *
   * @param gf the function to apply to this Or's Good value, if it is a Good
   * @param bf the function to apply to this Or's Bad value, if it is a Bad
   * @return the result of applying the appropriate one of the two passed functions, gf or bf, to this Or's value
   */
  def fold[V](gf: G => V, bf: B => V): V

   /**
    * The asOr method has been deprecated and will be removed in a future version of Scalactic.
    * Please remove invocations of asOr in expressions of type Good(value).orBad[Type] and
    * Good[Type].orBad(value) (which now return a type already widened to Or), otherwise please
    * use a type annotation to widen the type, such as: (Good(3): Int Or ErrorMessage).
    */
  @deprecated("The asOr is no longer needed because Good(value).orBad[Type] and Good[Type].orBad(value) now return Or. You can delete invocations of asOr in those cases, otherwise, please use a type annotation to widen the type, like (Good(3): Int Or ErrorMessage).")
  def asOr: G Or B = this
}

/**
 * The companion object for Or providing factory methods for creating Ors from Eithers and Trys.
 */
object Or {

  /**
   * Trait providing a concise type lambda syntax for Or types partially applied on their "bad" type.
   *
   * 
   * This trait is used to curry the type parameters of Or, which takes two type parameters,
   * into a type (this trait) which takes one parameter, and another (its type member) which
   * takes the other. For example, type Or[GOOD, BAD] (which can be written in infix form
   * as GOOD Or BAD) can be expressed in curried form as Or.B[BAD]#G[GOOD].
   * Leaving off the final GOOD type parameter yields a "type lambda," such as Or.B[ErrorMessage]#G.
   * 
   *
   * 
   * For example, consider this method that takes two type parameters, a type constructor named Context and a 
   * type named A:
   * 
   *
   *    * scala> def example[Context[_], A](ca: Context[A]) = ca
   * example: [Context[_], A](ca: Context[A])Context[A]
   * 
   *
   * 
   * Because List takes a single type parameter, it fits the shape of Context,
   * it can be simply passed to example--i.e., the compiler will infer Context as List:
   * 
   *
   *    * scala> example(List(1, 2, 3))
   * res0: List[Int] = List(1, 2, 3)
   * 
   *
   * 
   * But because Or takes two type parameters, G for the "good" type and B for the "bad" type, it
   * cannot simply be passed, because the compiler doesn't know which of G or B you'd want to abstract over:
   * 
   *
   *    * scala> val or: Int Or ErrorMessage = Good(3)
   * or: org.scalactic.Or[Int,org.scalactic.ErrorMessage] = Good(3)
   *
   * scala> example(or)
   * <console>:16: error: no type parameters for method example: (ca: Context[A])Context[A] exist so that it can be applied to arguments (org.scalactic.Or[Int,org.scalactic.ErrorMessage])
   *  --- because ---
   * argument expression's type is not compatible with formal parameter type;
   *  found   : org.scalactic.Or[Int,org.scalactic.ErrorMessage]
   *     (which expands to)  org.scalactic.Or[Int,String]
   *  required: ?Context[?A]
   *        example(or)
   *        ^
   * <console>:16: error: type mismatch;
   *  found   : org.scalactic.Or[Int,org.scalactic.ErrorMessage]
   *     (which expands to)  org.scalactic.Or[Int,String]
   *  required: Context[A]
   *        example(or)
   *                ^
   * 
   *
   * 
   * You must therefore tell the compiler which one you want with a "type lambda." Here's an example:
   * 
   *
   *    * scala> example[({type L[G] = G Or ErrorMessage})#L, Int](or)
   * res1: org.scalactic.Or[Int,org.scalactic.ErrorMessage] = Good(3)
   * 
   *
   * 
   * The alternate type lambda syntax provided by this trait is more concise and hopefully easier to remember and read:
   * 
   *
   *    * scala> example[Or.B[ErrorMessage]#G, Int](or)
   * res2: org.scalactic.Or[Int,org.scalactic.ErrorMessage] = Good(3)
   * 
   * 
   * 
   * You can read Or.B[ErrorMessage]#G as: an Or with its "bad" type, B,
   * fixed to ErrorMessage and its "good" type, G, left unspecified.
   * 
   */
  private[scalactic] trait B[BAD] {

    /**
     * Type member that provides a curried alias to  G Or B.
     *
     * 
     * See the main documentation for trait B for more detail.
     * 
     */
    type G[GOOD] = GOOD Or BAD
  }

  /**
   * Trait providing a concise type lambda syntax for Or types partially applied on their "good" type.
   *
   * 
   * This trait is used to curry the type parameters of Or, which takes two type parameters,
   * into a type (this trait) which takes one parameter, and another (its type member) which
   * takes the other. For example, type Or[GOOD, BAD] (which can be written in infix form
   * as GOOD Or BAD) can be expressed in curried form as Or.G[GOOD]#B[BAD].
   * Leaving off the final B type parameter yields a "type lambda," such as Or.G[Int]#B.
   * 
   *
   * 
   * For example, consider this method that takes two type parameters, a type constructor named Context and a 
   * type named A:
   * 
   *
   *    * scala> def example[Context[_], A](ca: Context[A]) = ca
   * example: [Context[_], A](ca: Context[A])Context[A]
   * 
   *
   * 
   * Because List takes a single type parameter, it fits the shape of Context,
   * it can be simply passed to example--i.e., the compiler will infer Context as List:
   * 
   *
   *    * scala> example(List(1, 2, 3))
   * res0: List[Int] = List(1, 2, 3)
   * 
   *
   * 
   * But because Or takes two type parameters, G for the "good" type and B for the "bad" type, it
   * cannot simply be passed, because the compiler doesn't know which of G or B you'd want to abstract over:
   * 
   *
   *    * scala> val or: Int Or ErrorMessage = Good(3)
   * or: org.scalactic.Or[Int,org.scalactic.ErrorMessage] = Good(3)
   *
   * scala> example(or)
   * <console>:16: error: no type parameters for method example: (ca: Context[A])Context[A] exist so that it can be applied to arguments (org.scalactic.Or[Int,org.scalactic.ErrorMessage])
   *  --- because ---
   * argument expression's type is not compatible with formal parameter type;
   *  found   : org.scalactic.Or[Int,org.scalactic.ErrorMessage]
   *     (which expands to)  org.scalactic.Or[Int,String]
   *  required: ?Context[?A]
   *        example(or)
   *        ^
   * <console>:16: error: type mismatch;
   *  found   : org.scalactic.Or[Int,org.scalactic.ErrorMessage]
   *     (which expands to)  org.scalactic.Or[Int,String]
   *  required: Context[A]
   *        example(or)
   *                ^
   * 
   *
   * 
   * You must therefore tell the compiler which one you want with a "type lambda." Here's an example:
   * 
   *
   *    * scala> example[({type L[B] = Int Or B})#L, ErrorMessage](or)
   * res1: org.scalactic.Or[Int,org.scalactic.ErrorMessage] = Good(3)
   * 
   *
   * 
   * The alternate type lambda syntax provided by this trait is more concise and hopefully easier to remember and read:
   * 
   *
   *    * scala> example[Or.G[Int]#B, ErrorMessage](or)
   * res15: org.scalactic.Or[Int,org.scalactic.ErrorMessage] = Good(3)
   * 
   * 
   * 
   * You can read Or.G[Int]#B as: an Or with its "good" type, G,
   * fixed to Int and its "bad" type, B, left unspecified.
   * 
   */
  private[scalactic] trait G[GOOD] {

    /**
     * Type member that provides a curried alias to  G Or B.
     *
     * 
     * See the main documentation for trait G for more detail.
     * 
     */
    type B[BAD] = GOOD Or BAD
  }

  /**
   * Constructs a new Or from the given Try.
   *
   * @param theTry the Try to convert to an Or
   * @return a new Or whose Good type is the Try's Success type and whose
   *    Bad type is Throwable.
   */
  def from[G](theTry: Try[G]): G Or Throwable =
    theTry match {
      case Success(g) => Good(g)
      case Failure(e) => Bad(e)
    }

  /**
   * Constructs a new Or from the given Either.
   *
   * 
   * Note that values effectively “switch sides” when converting an Either to an Or. If the type of the
   * Either which you pass to Or.from is Either[ErrorMessage, Int] for example, the result will be an
   * Or[Int, ErrorMessage]. The reason is that the convention for Either is that Left is used for “bad”
   * values and Right is used for “good” ones. If you with to keep the types on the same side, invoke swap on the
   * Either before passing it to from. 
   * 
   *
   * @param either the Either to convert to an Or
   * @return a new Or whose Good type is the Either's Right type and whose
   *    Bad type is Either's Left type.
   */
  def from[B, G](either: Either[B, G]): G Or B =
    either match {
      case Right(g) => Good(g)
      case Left(b) => Bad(b)
    }

  /**
   * Constructs a new Or from the given Option.
   *
   * @param option the Option to convert to an Or
   * @param orElse the Bad value to use if the Option passed as option is None.
   * @return a new Or whose Good type is the Option's type and whose
   *    Bad type is the type of the passed orElse parameter.
   */
  def from[G, B](option: Option[G], orElse: => B): G Or B =
    option match {
      case Some(g) => Good(g)
      case None => Bad(orElse)
    }
}

/**
 * Contains a “good” value.
 *
 * 
 * You can decide what “good” means, but it is expected Good will be commonly used
 * to hold valid results for processes that may fail with an error instead of producing a valid result.
 * 
 *
 * @param g the “good” value
 */
final case class Good[+G](g: G) extends Or[G,Nothing] {
  override val isGood: Boolean = true

  /*
   * Returns this Good with the type widened to Or.
   *
   * 
   * This widening method can useful when the compiler infers the more specific Good type and
   * you need the more general Or type. Here's an example that uses foldLeft on
   * a List[Int] to calculate a sum, so long as only odd numbers exist in a passed List:
   * 
   *
   *    * scala> import org.scalactic._
   * import org.scalactic._
   *
   * scala> def oddSum(xs: List[Int]): Int Or ErrorMessage =
   *      |   xs.foldLeft(Good(0).orBad[ErrorMessage]) { (acc, x) =>
   *      |     acc match {
   *      |       case Bad(_) => acc
   *      |       case Good(_) if (x % 2 == 0) => Bad(x + " is not odd")
   *      |       case Good(sum) => Good(sum + x)
   *      |     }
   *      |   }
   * <console>:13: error: constructor cannot be instantiated to expected type;
   *  found   : org.scalactic.Bad[G,B]
   *  required: org.scalactic.Good[Int,org.scalactic.ErrorMessage]
   *              case Bad(_) => acc
   *                   ^
   * <console>:14: error: type mismatch;
   *  found   : org.scalactic.Bad[Nothing,String]
   *  required: org.scalactic.Good[Int,org.scalactic.ErrorMessage]
   *              case Good(_) if (x % 2 == 0) => Bad(x + " is not odd")
   *                                                 ^
   * 
   *
   * 
   * Because the compiler infers the type of the first parameter to foldLeft to be Good[Int, ErrorMessage],
   * it expects the same type to appear as the result type of function passed as the second, curried parameter. What you really want is
   * that both types be Int Or ErrorMessage, but the compiler thinks you want them to be the more specific
   * Good[Int, ErrorMessage]. You can use the asOr method to indicate you want the type to be Or
   * with minimal boilerplate:
   * 
   *
   *    * scala> def oddSum(xs: List[Int]): Int Or ErrorMessage =
   *      |   xs.foldLeft(Good(0).orBad[ErrorMessage].asOr) { (acc, x) =>
   *      |     acc match {
   *      |       case Bad(_) => acc
   *      |       case Good(_) if (x % 2 == 0) => Bad(x + " is not odd")
   *      |       case Good(sum) => Good(sum + x)
   *      |     }
   *      |   }
   * oddSum: (xs: List[Int])org.scalactic.Or[Int,org.scalactic.ErrorMessage]
   * 
   *
   * 
   * Now you can use the method to sum a List of odd numbers:
   * 
   *
   *    * scala> oddSum(List(1, 2, 3))
   * res2: org.scalactic.Or[Int,org.scalactic.ErrorMessage] = Bad(2 is not odd)
   *
   * scala> oddSum(List(1, 3, 5))
   * res3: org.scalactic.Or[Int,org.scalactic.ErrorMessage] = Good(9)
   * 
   */
   /**
    * The asOr method has been deprecated and will be removed in a future version of Scalactic.
    * Please remove invocations of asOr in expressions of type Good(value).orBad[Type] and
    * Good[Type].orBad(value) (which now return a type already widened to Or), otherwise please
    * use a type annotation to widen the type, such as: (Good(3): Int Or ErrorMessage).
    */
  @deprecated("The asOr is no longer needed because Good(value).orBad[Type] and Good[Type].orBad(value) now return Or. You can delete invocations of asOr in those cases, otherwise, please use a type annotation to widen the type, like (Good(3): Int Or ErrorMessage).")
  override def asOr: G Or Nothing = this

  /**
   * Narrows the Bad type of this Good to the given type.
   *
   * 
   * Because Or has two types, but the Good factory method only takes a value of the “good” type, the Scala compiler will
   * infer Nothing for the Bad type:
   * 
   *
   *    * scala> Good(3)
   * res0: org.scalactic.Good[Int,Nothing] = Good(3)
   * 
   *
   * 
   * Often Nothing will work fine, as it will be widened as soon as the compiler encounters a more specific Bad type.
   * Sometimes, however, you may need to specify it. In such situations you can use this orBad method, like this:
   * 
   *
   *    * scala> Good(3).orBad[String]
   * res1: org.scalactic.Good[Int,String] = Good(3)
   * 
   */
  def orBad[C]: G Or C = this
  def get: G = g
  def map[H](f: G => H): H Or Nothing = Good(f(g))
  def badMap[C](f: Nothing => C): G Or C = this
  def recover[H >: G](f: Nothing => H): H Or Nothing = this
  def recoverWith[H >: G, C](f: Nothing => H Or C): H Or C = this
  def foreach(f: G => Unit): Unit = f(g)
  def flatMap[H, C >: Nothing](f: G => H Or C): H Or C = f(g)
  def filter[C >: Nothing](f: G => Validation[C]): G Or C =
    f(g) match {
      case Fail(error) => Bad(error)
      case Pass => this
    }
  def exists(p: G => Boolean): Boolean = p(g)
  def forall(p: G => Boolean): Boolean = p(g)
  def getOrElse[H >: G](default: => H): G = g
  def orElse[H >: G, C >: Nothing](alternative: => H Or C): G Or Nothing = this
  def toOption: Some[G] = Some(g)
  def toSeq: scala.collection.immutable.IndexedSeq[G] = Vector(g)
  def toEither: Either[Nothing, G] = Right(g)
  def accumulating: G Or One[Nothing] = Good(g)
  def toTry(implicit ev: Nothing <:< Throwable): Success[G] = Success(g)
  def swap: Nothing Or G = Bad(g)
  def transform[H, C](gf: G => H Or C, bf: Nothing => H Or C): H Or C = gf(g)
  def fold[V](gf: G => V, bf: Nothing => V): V = gf(g)
}

/**
 * Companion object for Good that offers, in addition to the standard factory method
 * for Good that takes single “good” type, an parameterless apply 
 * used to narrow the Good type when creating a Bad.
 */
object Good {

  /**
   * Supports the syntax that enables Bad instances to be created with a specific
   * Good type.
   */
  class GoodType[G] {

    /**
     * Factory method for Bad instances whose Good type is specified
     * by the type parameter of this GoodType.
     *
     * 
     * This method enables this syntax:
     * 
     *
     *      * Good[Int].orBad("oops")
     *           ^
     * 
     *
     * @param b the “bad” value
     * @return a new Bad instance containing the passed b value
     */
    def orBad[B](b: B): G Or B = Bad[B](b)

    override def toString: String = "GoodType"
  }

  /**
   * Captures a Good type to enable a Bad to be constructed with a specific
   * Good type.
   *
   * 
   * Because Or has two types, but the Bad factory method only takes a value of the “bad” type, the Scala compiler will
   * infer Nothing for the Good type:
   * 
   *
   *    * scala> Bad("oops")
   * res1: org.scalactic.Bad[Nothing,String] = Bad(oops)
   * 
   *
   * 
   * Often Nothing will work fine, as it will be widened as soon as the compiler encounters a more specific Good type.
   * Sometimes, however, you may need to specify it. In such situations you can use this factory method, like this:
   * 
   *
   *    * scala> Good[Int].orBad("oops")
   * res3: org.scalactic.Bad[Int,String] = Bad(oops)
   * 
   */
  def apply[G]: GoodType[G] = new GoodType[G]
}

/**
 * Contains a “bad” value.
 *
 * 
 * You can decide what “bad” means, but it is expected Bad will be commonly used
 * to hold descriptions of an error (or several, accumulated errors). Some examples of possible error descriptions
 * are String error messages, Int error codes, Throwable exceptions,
 * or instances of a case class hierarchy designed to describe errors.
 * 
 *
 * @param b the “bad” value
 */
final case class Bad[+B](b: B) extends Or[Nothing,B] {
  override val isBad: Boolean = true

  /*
   * Returns this Bad with the type widened to Or.
   *
   * 
   * This widening method can useful when the compiler infers the more specific Bad type and
   * you need the more general Or type. Here's an example that uses foldLeft on
   * a List[Int] to find the first even number in the List:
   * 
   *
   *    * scala> import org.scalactic._
   * import org.scalactic._
   *
   * scala> def findFirstEven(xs: List[Int]): Int Or ErrorMessage =
   *      |   xs.foldLeft(Good[Int].orBad("No even nums")) { (acc, x) =>
   *      |     acc orElse (if (x % 2 == 0) Good(x) else acc)
   *      |   }
   * <console>:13: error: type mismatch;
   *  found   : org.scalactic.Or[Int,String]
   *  required: org.scalactic.Bad[Int,String]
   *            acc orElse (if (x % 2 == 0) Good(x) else acc)
   *                ^
   * 
   *
   * 
   * Because the compiler infers the type of the first parameter to foldLeft to be Bad[Int, String],
   * it expects the same type to appear as the result type of function passed as the second, curried parameter. What you really want is
   * that both types be Int Or String, but the compiler thinks you want them to be the more specific
   * Bad[Int, String]. You can use the asOr method to indicate you want the type to be Or
   * with minimal boilerplate:
   * 
   *
   *    * scala> def findFirstEven(xs: List[Int]): Int Or ErrorMessage =
   *      |   xs.foldLeft(Good[Int].orBad("No even nums").asOr) { (acc, x) =>
   *      |     acc orElse (if (x % 2 == 0) Good(x) else acc)
   *      |   }
   * findFirstEven: (xs: List[Int])org.scalactic.Or[Int,String]
   * 
   *
   * 
   * Now you can use the method to find the first even number in a List:
   * 
   *
   *    * scala> findFirstEven(List(1, 2, 3))
   * res4: org.scalactic.Or[Int,ErrorMessage] = Good(2)
   *
   * scala> findFirstEven(List(1, 3, 5))
   * res5: org.scalactic.Or[Int,ErrorMessage] = Bad(No even nums)
   * 
   */
   /**
    * The asOr method has been deprecated and will be removed in a future version of Scalactic.
    * Please remove invocations of asOr in expressions of type Good(value).orBad[Type] and
    * Good[Type].orBad(value) (which now return a type already widened to Or), otherwise please
    * use a type annotation to widen the type, such as: (Good(3): Int Or ErrorMessage).
    */
  @deprecated("The asOr is no longer needed because Good(value).orBad[Type] and Good[Type].orBad(value) now return Or. You can delete invocations of asOr in those cases, otherwise, please use a type annotation to widen the type, like (Good(3): Int Or ErrorMessage).")
  override def asOr: Nothing Or B = this
  def get: Nothing = throw new NoSuchElementException("Bad(" + b + ").get")
  def map[H](f: Nothing => H): H Or B = this
  def badMap[C](f: B => C): Nothing Or C = Bad(f(b))
  def recover[H >: Nothing](f: B => H): H Or B = Good(f(b))
  def recoverWith[H >: Nothing, C](f: B => H Or C): H Or C = f(b)
  def foreach(f: Nothing => Unit): Unit = ()
  def flatMap[H, C >: B](f: Nothing => H Or C): H Or C = this
  def filter[C >: B](f: Nothing => Validation[C]): Nothing Or C = this
  def exists(p: Nothing => Boolean): Boolean = false
  def forall(p: Nothing => Boolean): Boolean = true
  def getOrElse[H >: Nothing](default: => H): H = default
  def orElse[H >: Nothing, C >: B](alternative: => H Or C): H Or C = alternative
  def toOption: None.type = None
  def toSeq: scala.collection.immutable.IndexedSeq[Nothing] = Vector.empty
  def toEither: Either[B, Nothing] = Left(b)
  def accumulating: Nothing Or One[B] = Bad(One(b))
  def toTry(implicit ev: B <:< Throwable): Failure[Nothing] = Failure(b)
  def swap: B Or Nothing = Good(b)
  def transform[H, C](gf: Nothing => H Or C, bf: B => H Or C): H Or C = bf(b)
  def fold[V](gf: Nothing => V, bf: B => V): V = bf(b)
}
org.scalactic.Or.scala Maven / Gradle / Ivy

The motivation for `Or`

An `Either` with “attitude”

Accumulating errors with `Or`

Other ways to accumulate errors

Using `combined`

Using `validatedBy`

Using `zip`

Using `when`

Much ado about `Nothing`
