org.scalatest.concurrent.Conductors.scala Maven / Gradle / Ivy
/*
* Copyright 2001-2013 Artima, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.scalatest.concurrent
import org.scalatest._
import PatienceConfiguration._
import PimpedThreadGroup._
import org.scalactic.source
import _root_.java.util.concurrent.atomic.AtomicReference
import _root_.java.util.concurrent.{CopyOnWriteArrayList, ArrayBlockingQueue}
import org.scalatest.exceptions.NotAllowedException
import time.{Seconds, Millis, Span}
/**
* Trait whose Conductor member facilitates the testing of classes, traits, and libraries designed
* to be used by multiple threads concurrently.
*
*
* A Conductor conducts a multi-threaded scenario by maintaining
* a clock of "beats." Beats are numbered starting with 0. You can ask a
* Conductor to run threads that interact with the class, trait,
* or library (the subject)
* you want to test. A thread can call the Conductor's
* waitForBeat method, which will cause the thread to block
* until that beat has been reached. The Conductor will advance
* the beat only when all threads participating in the test are blocked. By
* tying the timing of thread activities to specific beats, you can write
* tests for concurrent systems that have deterministic interleavings of
* threads.
*
*
*
* A Conductor object has a three-phase lifecycle. It begins its life
* in the setup phase. During this phase, you can start threads by
* invoking the thread method on the Conductor.
* When conduct is invoked on a Conductor, it enters
* the conducting phase. During this phase it conducts the one multi-threaded
* scenario it was designed to conduct. After all participating threads have exited, either by
* returning normally or throwing an exception, the conduct method
* will complete, either by returning normally or throwing an exception. As soon as
* the conduct method completes, the Conductor
* enters its defunct phase. Once the Conductor has conducted
* a multi-threaded scenario, it is defunct and can't be reused. To run the same test again,
* you'll need to create a new instance of Conductor.
*
*
*
* Here's an example of the use of Conductor to test the ArrayBlockingQueue
* class from java.util.concurrent:
*
*
*
* import org.scalatest.fixture.FunSuite
* import org.scalatest.matchers.Matchers
* import java.util.concurrent.ArrayBlockingQueue
* import org.scalatest.concurrent.Conductors
*
* class ArrayBlockingQueueSuite extends FunSuite with Matchers with Conductors {
*
* test("calling put on a full queue blocks the producer thread") {
*
* val conductor = new Conductor
* import conductor._
*
* val buf = new ArrayBlockingQueue[Int](1)
*
* thread("producer") {
* buf put 42
* buf put 17
* beat should be (1)
* }
*
* thread("consumer") {
* waitForBeat(1)
* buf.take should be (42)
* buf.take should be (17)
* }
*
* whenFinished {
* buf should be ('empty)
* }
* }
* }
*
*
*
* When the test shown is run, it will create one thread named producer and another named
* consumer. The producer thread will eventually execute the code passed as a by-name
* parameter to thread("producer"):
*
*
*
* buf put 42
* buf put 17
* beat should be (1)
*
*
* Similarly, the consumer thread will eventually execute the code passed as a by-name parameter
* to thread("consumer"):
*
*
*
* waitForBeat(1)
* buf.take should be (42)
* buf.take should be (17)
*
*
*
* The thread creates the threads and starts them, but they will not immediately
* execute the by-name parameter passed to them. They will first block, waiting for the Conductor
* to give them a green light to proceed.
*
*
*
* The next call in the test is whenFinished. This method will first call conduct on
* the Conductor, which will wait until all threads that were created (in this case, producer and consumer) are
* at the "starting line", i.e., they have all started and are blocked, waiting on the green light.
* The conduct method will then give these threads the green light and they will
* all start executing their blocks concurrently.
*
*
*
* When the threads are given the green light, the beat is 0. The first thing the producer thread does is put 42 in
* into the queue. As the queue is empty at this point, this succeeds. The producer thread next attempts to put a 17
* into the queue, but because the queue has size 1, this can't succeed until the consumer thread has read the 42
* from the queue. This hasn't happened yet, so producer blocks. Meanwhile, the consumer thread's first act is to
* call waitForBeat(1). Because the beat starts out at 0, this call will block the consumer thread.
* As a result, once the producer thread has executed buf put 17 and the consumer thread has executed
* waitForBeat(1), both threads will be blocked.
*
*
*
* The Conductor maintains a clock that wakes up periodically and checks to see if all threads
* participating in the multi-threaded scenario (in this case, producer and consumer) are blocked. If so, it
* increments the beat. Thus sometime later the beat will be incremented, from 0 to 1. Because consumer was
* waiting for beat 1, it will wake up (i.e., the waitForBeat(1) call will return) and
* execute the next line of code in its block, buf.take should be (42). This will succeed, because
* the producer thread had previously (during beat 0) put 42 into the queue. This act will also make
* producer runnable again, because it was blocked on the second put, which was waiting for another
* thread to read that 42.
*
*
*
* Now both threads are unblocked and able to execute their next statement. The order is
* non-deterministic, and can even be simultaneous if running on multiple cores. If the consumer thread
* happens to execute buf.take should be (17) first, it will block (buf.take will not return), because the queue is
* at that point empty. At some point later, the producer thread will execute buf put 17, which will
* unblock the consumer thread. Again both threads will be runnable and the order non-deterministic and
* possibly simulataneous. The producer thread may charge ahead and run its next statement, beat should be (1).
* This will succeed because the beat is indeed 1 at this point. As this is the last statement in the producer's block,
* the producer thread will exit normally (it won't throw an exception). At some point later the consumer thread will
* be allowed to complete its last statement, the buf.take call will return 17. The consumer thread will
* execute 17 should be (17). This will succeed and as this was the last statement in its block, the consumer will return
* normally.
*
*
*
* If either the producer or consumer thread had completed abruptbly with an exception, the conduct method
* (which was called by whenFinished) would have completed abruptly with an exception to indicate the test
* failed. However, since both threads returned normally, conduct will return. Because conduct doesn't
* throw an exception, whenFinished will execute the block of code passed as a by-name parameter to it: buf should be ('empty).
* This will succeed, because the queue is indeed empty at this point. The whenFinished method will then return, and
* because the whenFinished call was the last statement in the test and it didn't throw an exception, the test completes successfully.
*
*
*
* This test tests ArrayBlockingQueue, to make sure it works as expected. If there were a bug in ArrayBlockingQueue
* such as a put called on a full queue didn't block, but instead overwrote the previous value, this test would detect
* it. However, if there were a bug in ArrayBlockingQueue such that a call to take called on an empty queue
* never blocked and always returned 0, this test might not detect it. The reason is that whether the consumer thread will ever call
* take on an empty queue during this test is non-deterministic. It depends on how the threads get scheduled during beat 1.
* What is deterministic in this test, because the consumer thread blocks during beat 0, is that the producer thread will definitely
* attempt to write to a full queue. To make sure the other scenario is tested, you'd need a different test:
*
*
*
* test("calling take on an empty queue blocks the consumer thread") {
*
* val conductor = new Conductor
* import conductor._
*
* val buf = new ArrayBlockingQueue[Int](1)
*
* thread("producer") {
* waitForBeat(1)
* buf put 42
* buf put 17
* }
*
* thread("consumer") {
* buf.take should be (42)
* buf.take should be (17)
* beat should be (1)
* }
*
* whenFinished {
* buf should be ('empty)
* }
* }
*
*
*
* In this test, the producer thread will block, waiting for beat 1. The consumer thread will invoke buf.take
* as its first act. This will block, because the queue is empty. Because both threads are blocked, the Conductor
* will at some point later increment the beat to 1. This will awaken the producer thread. It will return from its
* waitForBeat(1) call and execute buf put 42. This will unblock the consumer thread, which will
* take the 42, and so on.
*
*
*
* The problem that Conductor is designed to address is the difficulty, caused by the non-deterministic nature
* of thread scheduling, of testing classes, traits, and libraries that are intended to be used by multiple threads.
* If you just create a test in which one thread reads from an ArrayBlockingQueue and
* another writes to it, you can't be sure that you have tested all possible interleavings of threads, no matter
* how many times you run the test. The purpose of Conductor
* is to enable you to write tests with deterministic interleavings of threads. If you write one test for each possible
* interleaving of threads, then you can be sure you have all the scenarios tested. The two tests shown here, for example,
* ensure that both the scenario in which a producer thread tries to write to a full queue and the scenario in which a
* consumer thread tries to take from an empty queue are tested.
*
*
*
* Class Conductor was inspired by the
* MultithreadedTC project,
* created by Bill Pugh and Nat Ayewah of the University of Maryland.
*
*
*
* Although useful, bear in mind that a Conductor's results are not guaranteed to be
* accurate 100% of the time. The reason is that it uses java.lang.Thread's getState method to
* decide when to advance the beat. This use goes against the advice given in the Javadoc documentation for
* getState, which says, "This method is designed for use in monitoring of the system state, not for
* synchronization." In short, sometimes the return value of getState occasionally may be inacurrate,
* which in turn means that sometimes a Conductor could decide to advance the beat too early. In practice,
* Conductor has proven to be very helpful when developing thread safe classes. It is also useful in
* for regression tests, but you may have to tolerate occasional false negatives.
*
*
* @author Josh Cough
* @author Bill Venners
*/
trait Conductors extends PatienceConfiguration {
/**
* Class that facilitates the testing of classes, traits, and libraries designed
* to be used by multiple threads concurrently.
*
*
* A Conductor conducts a multi-threaded scenario by maintaining
* a clock of "beats." Beats are numbered starting with 0. You can ask a
* Conductor to run threads that interact with the class, trait,
* or library (the subject)
* you want to test. A thread can call the Conductor's
* waitForBeat method, which will cause the thread to block
* until that beat has been reached. The Conductor will advance
* the beat only when all threads participating in the test are blocked. By
* tying the timing of thread activities to specific beats, you can write
* tests for concurrent systems that have deterministic interleavings of
* threads.
*
*
*
* A Conductor object has a three-phase lifecycle. It begins its life
* in the setup phase. During this phase, you can start threads by
* invoking the thread method on the Conductor.
* When conduct is invoked on a Conductor, it enters
* the conducting phase. During this phase it conducts the one multi-threaded
* scenario it was designed to conduct. After all participating threads have exited, either by
* returning normally or throwing an exception, the conduct method
* will complete, either by returning normally or throwing an exception. As soon as
* the conduct method completes, the Conductor
* enters its defunct phase. Once the Conductor has conducted
* a multi-threaded scenario, it is defunct and can't be reused. To run the same test again,
* you'll need to create a new instance of Conductor.
*
*
*
* Here's an example of the use of Conductor to test the ArrayBlockingQueue
* class from java.util.concurrent:
*
*
*
* import org.scalatest.fixture.FunSuite
* import org.scalatest.matchers.Matchers
* import java.util.concurrent.ArrayBlockingQueue
* import org.scalatest.concurrent.Conductors
*
* class ArrayBlockingQueueSuite extends FunSuite with Matchers with Conductors {
*
* test("calling put on a full queue blocks the producer thread") {
*
* val conductor = new Conductor
* import conductor._
*
* val buf = new ArrayBlockingQueue[Int](1)
*
* thread("producer") {
* buf put 42
* buf put 17
* beat should be (1)
* }
*
* thread("consumer") {
* waitForBeat(1)
* buf.take should be (42)
* buf.take should be (17)
* }
*
* whenFinished {
* buf should be ('empty)
* }
* }
* }
*
*
*
* When the test shown is run, it will create one thread named producer and another named
* consumer. The producer thread will eventually execute the code passed as a by-name
* parameter to thread("producer"):
*
*
*
* buf put 42
* buf put 17
* beat should be (1)
*
*
* Similarly, the consumer thread will eventually execute the code passed as a by-name parameter
* to thread("consumer"):
*
*
*
* waitForBeat(1)
* buf.take should be (42)
* buf.take should be (17)
*
*
*
* The thread calls create the threads and starts them, but they will not immediately
* execute the by-name parameter passed to them. They will first block, waiting for the Conductor
* to give them a green light to proceed.
*
*
*
* The next call in the test is whenFinished. This method will first call conduct on
* the Conductor, which will wait until all threads that were created (in this case, producer and consumer) are
* at the "starting line", i.e., they have all started and are blocked, waiting on the green light.
* The conduct method will then give these threads the green light and they will
* all start executing their blocks concurrently.
*
*
*
* When the threads are given the green light, the beat is 0. The first thing the producer thread does is put 42 in
* into the queue. As the queue is empty at this point, this succeeds. The producer thread next attempts to put a 17
* into the queue, but because the queue has size 1, this can't succeed until the consumer thread has read the 42
* from the queue. This hasn't happened yet, so producer blocks. Meanwhile, the consumer thread's first act is to
* call waitForBeat(1). Because the beat starts out at 0, this call will block the consumer thread.
* As a result, once the producer thread has executed buf put 17 and the consumer thread has executed
* waitForBeat(1), both threads will be blocked.
*
*
*
* The Conductor maintains a clock that wakes up periodically and checks to see if all threads
* participating in the multi-threaded scenario (in this case, producer and consumer) are blocked. If so, it
* increments the beat. Thus sometime later the beat will be incremented, from 0 to 1. Because consumer was
* waiting for beat 1, it will wake up (i.e., the waitForBeat(1) call will return) and
* execute the next line of code in its block, buf.take should be (42). This will succeed, because
* the producer thread had previously (during beat 0) put 42 into the queue. This act will also make
* producer runnable again, because it was blocked on the second put, which was waiting for another
* thread to read that 42.
*
*
*
* Now both threads are unblocked and able to execute their next statement. The order is
* non-deterministic, and can even be simultaneous if running on multiple cores. If the consumer thread
* happens to execute buf.take should be (17) first, it will block (buf.take will not return), because the queue is
* at that point empty. At some point later, the producer thread will execute buf put 17, which will
* unblock the consumer thread. Again both threads will be runnable and the order non-deterministic and
* possibly simulataneous. The producer thread may charge ahead and run its next statement, beat should be (1).
* This will succeed because the beat is indeed 1 at this point. As this is the last statement in the producer's block,
* the producer thread will exit normally (it won't throw an exception). At some point later the consumer thread will
* be allowed to complete its last statement, the buf.take call will return 17. The consumer thread will
* execute 17 should be (17). This will succeed and as this was the last statement in its block, the consumer will return
* normally.
*
*
*
* If either the producer or consumer thread had completed abruptbly with an exception, the conduct method
* (which was called by whenFinished) would have completed abruptly with an exception to indicate the test
* failed. However, since both threads returned normally, conduct will return. Because conduct doesn't
* throw an exception, whenFinished will execute the block of code passed as a by-name parameter to it: buf should be ('empty).
* This will succeed, because the queue is indeed empty at this point. The whenFinished method will then return, and
* because the whenFinished call was the last statement in the test and it didn't throw an exception, the test completes successfully.
*
*
*
* This test tests ArrayBlockingQueue, to make sure it works as expected. If there were a bug in ArrayBlockingQueue
* such as a put called on a full queue didn't block, but instead overwrote the previous value, this test would detect
* it. However, if there were a bug in ArrayBlockingQueue such that a call to take called on an empty queue
* never blocked and always returned 0, this test might not detect it. The reason is that whether the consumer thread will ever call
* take on an empty queue during this test is non-deterministic. It depends on how the threads get scheduled during beat 1.
* What is deterministic in this test, because the consumer thread blocks during beat 0, is that the producer thread will definitely
* attempt to write to a full queue. To make sure the other scenario is tested, you'd need a different test:
*
*
*
* test("calling take on an empty queue blocks the consumer thread") {
*
* val conductor = new Conductor
* import conductor._
*
* val buf = new ArrayBlockingQueue[Int](1)
*
* thread("producer") {
* waitForBeat(1)
* buf put 42
* buf put 17
* }
*
* thread("consumer") {
* buf.take should be (42)
* buf.take should be (17)
* beat should be (1)
* }
*
* whenFinished {
* buf should be ('empty)
* }
* }
*
*
*
* In this test, the producer thread will block, waiting for beat 1. The consumer thread will invoke buf.take
* as its first act. This will block, because the queue is empty. Because both threads are blocked, the Conductor
* will at some point later increment the beat to 1. This will awaken the producer thread. It will return from its
* waitForBeat(1) call and execute buf put 42. This will unblock the consumer thread, which will
* take the 42, and so on.
*
*
*
* The problem that Conductor is designed to address is the difficulty, caused by the non-deterministic nature
* of thread scheduling, of testing classes, traits, and libraries that are intended to be used by multiple threads.
* If you just create a test in which one thread reads from an ArrayBlockingQueue and
* another writes to it, you can't be sure that you have tested all possible interleavings of threads, no matter
* how many times you run the test. The purpose of Conductor
* is to enable you to write tests with deterministic interleavings of threads. If you write one test for each possible
* interleaving of threads, then you can be sure you have all the scenarios tested. The two tests shown here, for example,
* ensure that both the scenario in which a producer thread tries to write to a full queue and the scenario in which a
* consumer thread tries to take from an empty queue are tested.
*
*
*
* Class Conductor was inspired by the
* MultithreadedTC project,
* created by Bill Pugh and Nat Ayewah of the University of Maryland.
*
*
*
* Although useful, bear in mind that a Conductor's results are not guaranteed to be
* accurate 100% of the time. The reason is that it uses java.lang.Thread's getState method to
* decide when to advance the beat. This use goes against the advice given in the Javadoc documentation for
* getState, which says, "This method is designed for use in monitoring of the system state, not for
* synchronization." In short, sometimes the return value of getState occasionally may be inacurrate,
* which in turn means that sometimes a Conductor could decide to advance the beat too early. In practice,
* Conductor has proven to be very helpful when developing thread safe classes. It is also useful in
* for regression tests, but you may have to tolerate occasional false negatives.
*
*
* @author Josh Cough
* @author Bill Venners
*/
final class Conductor {
/**
* The metronome used to coordinate between threads.
* This clock is advanced by the clock thread.
* The clock will not advance if it is frozen.
*/
private final val clock = new Clock
/////////////////////// thread management start //////////////////////////////
// place all threads in a new thread group
private final val threadGroup = new ThreadGroup("Orchestra")
// all the threads in this test
// This need not be volatile, because it is initialized with one object and
// that stays forever. Because it is final, it
private final val threads = new CopyOnWriteArrayList[Thread]()
// Used to keep track of what names have been created so far, so that
// it can be enforced that the names are unique.
private final val threadNames = new CopyOnWriteArrayList[String]()
// the main test thread
private final val mainThread = Thread.currentThread
/**
* Creates a new thread that will execute the specified function.
*
*
* The name of the thread will be of the form Conductor-Thread-N, where N is some integer.
*
*
*
* This method may be safely called by any thread.
*
*
* @param fun the function to be executed by the newly created thread
* @return the newly created thread
*/
def thread(fun: => Any): Thread = threadNamed("Conductor-Thread-" + threads.size) { fun }
/**
* Creates a new thread with the specified name that will execute the specified function.
*
*
* This method may be safely called by any thread.
*
*
* @param name the name of the newly created thread
* @param fun the function to be executed by the newly created thread
* @return the newly created thread
*/
def threadNamed(name: String)(fun: => Any)(implicit pos: source.Position): Thread = {
currentState.get match {
case TestFinished =>
throw new NotAllowedException(Resources.threadCalledAfterConductingHasCompleted, pos)
case _ =>
if (threadNames contains name)
throw new NotAllowedException(Resources.cantRegisterThreadsWithSameName(name), pos)
val t = TestThread(name, () => fun)
threads add t
threadNames add name
t.start()
t
}
}
// The reason that the thread is started immediately, is so that nested threads
// will start immediately, without requiring the user to explicitly start() them.
// Also, so that the thread method can return a Thread object.
/*
* A test thread runs the given function.
* It only does so after it is given permission to do so by the main thread.
* The main thread grants permission after it receives notication that
* all test threads are ready to go.
*/
private case class TestThread(name: String, f: () => Unit) extends Thread(threadGroup, name) {
// Indicate a TestThread has been created that has not yet started running
testThreadsStartingCounter.increment()
override def run(): Unit = {
try {
// Indicate to the TestThreadsStartingCounter that one more thread is ready to go
testThreadsStartingCounter.decrement()
// wait for the main thread to say its ok to go.
greenLightForTestThreads.await()
// go
f()
} catch {
case t: Throwable =>
if (firstExceptionThrown.isEmpty) {
// The mainThread is likely joined to some test thread, so it needs to be awakened. If it
// is joined to this thread, it will wake up shortly because this thread is about to die
// by returning. If it is joined to a different thread, then it needs to be interrupted,
// but this thread can't interrupt it, because then there's a race condition if it is
// actually joined to this thread, between join returning because this thread returns
// or join throwing an InterruptedException. So here just offer the throwable to
// the firstExceptionThrown queue and return. Only the first will be accepted by the queue.
// ThreadDeath exceptions that arise from being stopped will not go in because the queue
// is already full. The clock thread checks the firestExceptionThrown queue each cycle, and
// if it finds it is non-empty, it stops any live thread.
firstExceptionThrown offer t
}
}
}
}
/**
* A BlockingQueue containing the first exception that occured
* in test threads, or that was thrown by the clock thread.
*/
private val firstExceptionThrown = new ArrayBlockingQueue[Throwable](1)
// Won't write one that takes clockPeriod and timeout for 1.0. For now people
// can just call conduct(a, b) directly followed by the code they want to run
// afterwards. See if anyone asks for a whenFinished(a, b) {}
/**
* Invokes conduct and after conduct method returns,
* if conduct returns normally (i.e., without throwing
* an exception), invokes the passed function.
*
*
* If conduct completes abruptly with an exception, this method
* will complete abruptly with the same exception and not execute the passed
* function.
*
*
*
* This method must be called by the thread that instantiated this Conductor,
* and that same thread will invoke conduct and, if it returns noramlly, execute
* the passed function.
*
*
*
* Because whenFinished invokes conduct, it can only be invoked
* once on a Conductor instance. As a result, if you need to pass a block of
* code to whenFinished it should be the last statement of your test. If you
* don't have a block of code that needs to be run once all the threads have finished
* successfully, then you can simply invoke conduct and never invoke
* whenFinished.
*
*
* @param fun the function to execute after conduct call returns
* @throws NotAllowedException if the calling thread is not the thread that
* instantiated this Conductor, or if conduct has already
* been invoked on this conductor.
*/
def whenFinished(fun: => Assertion)(implicit pos: source.Position): Assertion = {
if (Thread.currentThread != mainThread)
throw new NotAllowedException(Resources.whenFinishedCanOnlyBeCalledByMainThread, pos)
if (conductingHasBegun)
throw new NotAllowedException(Resources.cannotInvokeWhenFinishedAfterConduct, pos)
conduct()
fun
}
/**
* Blocks the current thread until the thread beat reaches the
* specified value, at which point the current thread will be unblocked.
*
* @param beat the tick value to wait for
* @throws NotAllowedException if the a beat less than or equal to zero is passed
*/
def waitForBeat(beat: Int)(implicit pos: source.Position): Succeeded.type = {
if (beat == 0)
throw new NotAllowedException(Resources.cannotWaitForBeatZero, pos)
if (beat < 0)
throw new NotAllowedException(Resources.cannotWaitForNegativeBeat, pos)
clock waitForBeat beat
}
/**
* The current value of the thread clock.
*
* @return the current beat value
*/
def beat: Int = clock.currentBeat
/**
* Executes the passed function with the Conductor frozen so that it
* won't advance the clock.
*
*
* While the Conductor is frozen, the beat will not advance. Once the
* passed function has completed executing, the Conductor will be unfrozen
* so that the beat will advance when all threads are blocked, as normal.
*
*
* @param fun the function to execute while the Conductor is frozen.
*/
def withConductorFrozen[T](fun: => T): T = { clock.withClockFrozen(fun) }
/**
* Indicates whether the conductor has been frozen.
*
*
* Note: The only way a thread
* can freeze the conductor is by calling withConductorFrozen.
*
*/
def isConductorFrozen: Boolean = clock.isFrozen
private val testThreadsStartingCounter = new TestThreadsStartingCounter
/**
* Keeps the test threads from executing their bodies until the main thread
* allows them to.
*/
private val greenLightForTestThreads = new CountDownLatch(1)
/**
* Conducts a multi-threaded test using the configured maximum allowed time between beats
* (the timeout) and the configured time to sleep between checks (the interval).
*
* @param config the PatienceConfig object containing the timeout and
* interval parameters used to configure the multi-threaded test
*/
def conduct()(implicit config: PatienceConfig, pos: source.Position): Assertion = {
conductImpl(config.timeout, config.interval, pos)
}
/**
* Conducts a multi-threaded test using the configured maximum allowed time between beats
* (the timeout) and the configured time to sleep between checks (the interval).
*
*
* The maximum amount of time allowed between successive beats is configured by the value contained in the passed
* timeout parameter.
* The interval to sleep between successive checks for progress is configured by the value contained in the passed
* interval parameter.
*
*
* @param timeout the Timeout configuration parameter
* @param interval the Interval configuration parameter
*/
def conduct(timeout: Timeout, interval: Interval)(implicit pos: source.Position): Assertion = {
conductImpl(timeout.value, interval. value, pos)
}
/**
* Conducts a multi-threaded test using the configured maximum allowed time between beats
* (the timeout) and the configured time to sleep between checks (the interval).
*
*
* The maximum amount of time allowed between successive beats is configured by the value contained in the passed
* timeout parameter.
* The interval to sleep between successive checks for progress is configured by by the interval field of
* the PatienceConfig passed implicitly as the last parameter.
*
*
* @param timeout the Timeout configuration parameter
* @param config the PatienceConfig object containing the (unused) timeout and
* (used) interval parameters
*/
def conduct(timeout: Timeout)(implicit config: PatienceConfig, pos: source.Position): Assertion = {
conductImpl(timeout.value, config.interval, pos)
}
/**
* Conducts a multi-threaded test using the configured maximum allowed time between beats
* (the timeout) and the configured time to sleep between checks (the interval).
*
*
* The maximum amount of time allowed between successive beats is configured by the timeout field of
* the PatienceConfig passed implicitly as the last parameter.
* The interval to sleep between successive checks for progress is configured by the value contained in the passed
* interval parameter.
*
*
* @param interval the Interval configuration parameter
* @param config the PatienceConfig object containing the (used) timeout and
* (unused) interval parameters
*/
def conduct(interval: Interval)(implicit config: PatienceConfig, pos: source.Position): Assertion = {
conductImpl(config.timeout, interval.value, pos)
}
private val currentState: AtomicReference[ConductorState] = new AtomicReference(Setup)
/**
* Indicates whether either of the two overloaded conduct methods
* have been invoked.
*
*
* This method returns true if either conduct method has been invoked. The
* conduct method may have returned or not. (In other words, a true
* result from this method does not mean the conduct method has returned,
* just that it was already been invoked and,therefore, the multi-threaded scenario it
* conducts has definitely begun.)
*
*/
def conductingHasBegun: Boolean = currentState.get.testWasStarted
private def conductImpl(timeout: Span, clockInterval: Span, pos: source.Position): Assertion = {
// if the test was started already, explode
// otherwise, change state to TestStarted
if (conductingHasBegun)
throw new NotAllowedException(Resources.cannotCallConductTwice, pos)
else
currentState set TestStarted
// wait until all threads are definitely ready to go
if (threads.size > 0)
testThreadsStartingCounter.waitUntilAllTestThreadsHaveStarted()
// release the latch, allowing all threads to start
// wait for all the test threads to start before starting the clock
greenLightForTestThreads.countDown()
// start the clock thread
val clockThread = ClockThread(timeout, clockInterval)
clockThread.start()
// wait until all threads have ended
waitForThreads
// change state to test finished
currentState set TestFinished
if (!firstExceptionThrown.isEmpty)
throw firstExceptionThrown.peek
else Succeeded
}
/**
* Wait for all of the test case threads to complete, or for one
* of the threads to throw an exception, or for the clock thread to
* interrupt this (main) thread of execution. When the clock thread
* or other threads fail, the error is placed in the shared error array
* and thrown by this method.
*
* @param threads List of all the test case threads and the clock thread
*/
// Explain how we understand it works: if the thread that's been joined already dies with an exception
// that will go into errors, and this thread that called join will return. If the thread that's been joined returns and doesn't
// die, that means all went well, and join will return and it can loop to the next one.
// There should be no race condition between the last thread being waited on by join, it dies, join
// returns, and after that the error gets into the errors. Because if you look in run() in the
// thread inside createTestThread, the signaling error happens in a catch Throwable block before the thread
// returns.
private def waitForThreads: Succeeded.type = {
var interrupted = false
while(!interrupted && threadGroup.areAnyThreadsAlive) {
threadGroup.getThreads.foreach { t =>
if (!interrupted && t.isAlive && firstExceptionThrown.isEmpty)
try {
t.join()
}
catch {
// main thread will be interrupted if a timeout occurs, deadlock is suspected,
// or a test thread completes abruptly with an exception. Just loop here, because
// firstExceptionThrown should be non-empty after InterruptedException is caught, and
// if not, then I don't know how it got interrupted, but just keep looping.
case e: InterruptedException =>
interrupted = true
}
}
}
Succeeded
}
/**
* A Clock manages the current beat in a Conductor.
* Several duties stem from that responsibility.
*
* The clock will:
*
*
* - Block a thread until the tick has reached a particular time.
* - Report the current time
* - Run operations with the clock frozen.
*
*/
private class Clock {
import java.util.concurrent.locks.ReentrantReadWriteLock
import PimpedReadWriteLock._
// clock starts at time 0
private var currentTime = 0
// methods in Clock that access or modify the private instance vars of this
// Clock are synchronized on the object referenced from lock
private val lock = new AnyRef
/**
* Read locks are acquired when clock is frozen and must be
* released before the clock can advance in a advance(). (In a
* ReentrantReadWriteLock, multiple threads can hold the read lock (and these
* threads might read the value of currentTime (the currentBeat method), or just execute a
* function with the clock frozen (the withClockFrozen method). The write lock
* of a ReentrantReadWriteLock is exclusive, so only one can hold it, and it
* can't be held if there are a thread or threads holding the read lock. This
* is why the clock can't advance during a withClockFrozen, because the read
* lock is grabbed before the function is executed in withClockFrozen, thus
* advance will not be able to acquire the write lock to update currentTime
* until after withClockFrozen has released the read lock (and there are no other
* threads holding a read lock or the write lock).
*/
private val rwLock = new ReentrantReadWriteLock
private var highestBeatBeingWaitedOn = 0
/**
* Advance the current beat. In order to do so, the clock will wait
* until it has become unfrozen.
*
* All threads waiting for the clock to advance (they would have been put in the lock
* object's wait set by invoking the waitForBeat method) will be notified after the advance.
*
* Only the clock thread should be calling this.
*
* If the clock has been frozen by a thread, then that thread will own the readLock. Write
* lock can only be acquired when there are no readers, so ticks won't progress while someone
* has the clock frozen. Other methods also grab the read lock, like time (which gets
* the current beat.)
*/
def advance(): Succeeded.type = {
lock.synchronized {
rwLock.write {
currentTime += 1
}
lock.notifyAll()
}
Succeeded
}
/**
* The current beat.
*/
def currentBeat: Int =
lock.synchronized {
rwLock read currentTime
}
/**
* When wait for beat is called, the current thread will block until
* the given beat is reached by the clock.
*/
def waitForBeat(beat: Int): Succeeded.type = {
lock.synchronized {
if (beat > highestBeatBeingWaitedOn)
highestBeatBeingWaitedOn = beat
while (currentBeat < beat) {
try {
lock.wait()
} catch { // TODO: this is probably fine, but check JCIP about InterEx again
case e: InterruptedException => throw new AssertionError(e)
} // Actually I"m not sure. Maybe should reset the interupted status
}
}
Succeeded
}
// The reason there's no race condition between calling currentBeat in the while and calling
// lock.wait() later (between that) and some other thread incrementing the beat and doing
// a notify that this thread would miss (which it would want to know about if that's the
// new time that it's waiting for) is because both this and the currentBeat method are synchronized
// on the lock.
/**
* Returns true if any thread is waiting for a beat in the future (greater than the current beat)
*/
def isAnyThreadWaitingForABeat: Boolean = {
lock.synchronized { highestBeatBeingWaitedOn > currentTime }
}
/**
* When the clock is frozen, it will not advance even when all threads
* are blocked. Use this to block the current thread with a time limit,
* but prevent the clock from advancing due to a waitForBeat(Int) in
* another thread.
*/
def withClockFrozen[T](fun: => T): T = rwLock read fun
/**
* Check if the clock has been frozen by any threads.
*/
def isFrozen: Boolean = rwLock.getReadLockCount > 0
}
/**
* The clock thread is the manager of the multi-threaded scenario.
* Periodically checks all the test threads and regulates them.
* If all the threads are blocked and at least one is waiting for a beat,
* the clock advances to the next beat and all waiting threads are notified.
* If none of the threads are waiting for a tick or in timed waiting,
* a deadlock is detected. The clock thread times out if a thread is in runnable
* or all are blocked and one is in timed waiting for longer than the runLimit.
*
* Algorithm in detail:
*
* While there are threads alive
*
* If there are threads RUNNING
*
* If they have been running too long
*
* stop the test with a timeout error
*
* else if there are threads waiting for a beat
*
* advance the clock
*
* else if there are threads in TIMED_WAITING
*
* increment the deadlock counter
*
* if the deadlock counter has reached a threshold
*
* stop the test due to potential deadlock
*
* sleep for one clockInterval
*
*
* @param mainThread The main test thread. This thread will be waiting
* for all the test threads to finish. It will be interrupted if the
* ClockThread detects a deadlock or timeout.
*
* @param clockInterval The period between checks for the clock
*
* @param timeout The max time limit allowed between successive ticks of the clock
*/
private case class ClockThread(timeout: Span, clockInterval: Span) extends Thread("Conductor-Clock") {
// When a test thread throws an exception, the main thread will stop all the other threads,
// but won't stop the clock thread. This is because the clock thread will simply return after
// all the other threads have died. Thus the clock thread could last beyond the end of the
// application, if the clock period was set high. Thus by making the clock thread a daemon
// thread, it won't keep the application up just because it is still asleep and hasn't noticed
// yet that all the test threads are gone.
this setDaemon true
// bv made lastProgress and deadlockCount volatile because ClockThread is instantiated by
// a different thread that invokes run, so the thread that invokes run may not see the initial
// values correctly unless it is volatile (unless safely published). So just in case.
// used in detecting timeouts
@volatile private var lastProgress = System.nanoTime
// used in detecting deadlocks
@volatile private var deadlockCount = 0
private val MaxDeadlockDetectionsBeforeDeadlock = 50
/**
* Runs the steps described in the main documentation for class ClockThread.
*/
override def run(): Unit = {
// While there are threads that are not NEW or TERMINATED. (A thread is
// NEW after it has been instantiated, but run() hasn't been called yet.)
// So this means there are threads that are RUNNABLE, BLOCKED, WAITING, or
// TIMED_WAITING. (BLOCKED is waiting for a lock. WAITING is in the wait set.)
while (threadGroup.areAnyThreadsAlive) {
if (!firstExceptionThrown.isEmpty) {
// If any exception has been thrown, stop or interrupt any live test thread.
threadGroup.getThreads.foreach { t =>
if (t.isAlive) {
try{
t.stop()
}
catch {
case _: UnsupportedOperationException => t.interrupt()
}
}
}
}
// If any threads are in the RUNNABLE state, just check to see if there's been
// no progress for more than the timeout amount of time. If RUNNABLE threads
// exist, but the timeout limit has not been reached, then just go
// back to sleep.
else if (threadGroup.areAnyThreadsRunning) {
if (runningTooLong) stopDueToTimeout()
}
// No RUNNABLE threads, so if any threads are waiting for a beat, advance
// the beat.
else if (clock.isAnyThreadWaitingForABeat) {
clock.advance()
deadlockCount = 0
lastProgress = System.nanoTime
}
else if (!threadGroup.areAnyThreadsInTimedWaiting) {
// At this point, no threads are RUNNABLE, None
// are waiting for a beat, and none are in TimedWaiting.
// If this persists for MaxDeadlockDetectionsBeforeDeadlock,
// go ahead and abort.
detectDeadlock()
}
Thread.sleep(clockInterval.millisPart, clockInterval.nanosPart)
}
}
/**
* Threads have been running too long (timeout) if
* The number of seconds since the last progress are more
* than the allowed maximum run time.
*/
private def runningTooLong: Boolean = System.nanoTime - lastProgress > timeout.totalNanos
/**
* Stop the test due to a timeout.
*/
private def stopDueToTimeout(): Unit = {
val errorMessage = Resources.testTimedOut(timeout.prettyString)
// The mainThread is likely joined to some test thread, so wake it up. It will look and
// notice that the firstExceptionThrown is no longer empty, and will stop all live test threads,
// then rethrow the first exception thrown.
firstExceptionThrown offer new RuntimeException(errorMessage)
mainThread.interrupt()
}
/**
* Determine if there is a deadlock and if so, stop the test.
*/
private def detectDeadlock(): Unit = {
// Should never get to >= before ==, but just playing it safe
if (deadlockCount >= MaxDeadlockDetectionsBeforeDeadlock) {
val errorMessage = Resources.suspectedDeadlock(MaxDeadlockDetectionsBeforeDeadlock.toString, (clockInterval.scaledBy(MaxDeadlockDetectionsBeforeDeadlock)).prettyString)
firstExceptionThrown offer new RuntimeException(errorMessage)
// The mainThread is likely joined to some test thread, so wake it up. It will look and
// notice that the firstExceptionThrown is no longer empty, and will stop all live test threads,
// then rethrow the rirst exception thrown.
mainThread.interrupt()
}
else deadlockCount += 1
}
}
/**
* Base class for the possible states of the Conductor.
*/
private sealed abstract class ConductorState(val testWasStarted: Boolean, val testIsFinished: Boolean) extends Product with Serializable
/**
* The initial state of the Conductor.
* Any calls the thread{ ... } will result in started Threads that quickly block waiting for the
* main thread to give it the green light.
* Any call to conduct will start the test.
*/
private case object Setup extends ConductorState(false, false)
/**
* The state of the Conductor while its running.
* Any calls the thread{ ... } will result in running Threads.
* Any further call to conduct will result in an exception.
*/
private case object TestStarted extends ConductorState(true, false)
/**
* The state of the Conductor after all threads have finished,
* and the whenFinished method has completed.
* Any calls the thread{ ... } will result in an exception
* Any call to conduct will result in an exception.
*/
private case object TestFinished extends ConductorState(true, true)
}
}