org.scalatest.freespec.PathAnyFreeSpec.scala Maven / Gradle / Ivy
/*
* Copyright 2001-2019 Artima, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.scalatest.freespec
import org.scalatest._
/**
* A sister class to org.scalatest.freespec.PathAnyFreeSpec that isolates tests by running each test in its own
* instance of the test class, and for each test, only executing the path leading to that test.
*
*
* Class PathAnyFreeSpec behaves similarly to class org.scalatest.freespec.AnyFreeSpec, except that tests
* are isolated based on their path. The purpose of PathAnyFreeSpec is to facilitate writing
* specification-style tests for mutable objects in a clear, boilerpate-free way. To test mutable objects, you need to
* mutate them. Using a path class, you can make a statement in text, then implement that statement in code (including
* mutating state), and nest and combine these test/code pairs in any way you wish. Each test will only see
* the side effects of code that is in blocks that enclose the test. Here's an example:
*
*
*
* import org.scalatest.freespec
* import org.scalatest.matchers.should.Matchers
* import scala.collection.mutable.ListBuffer
*
* class ExampleSpec extends freespec.PathAnyFreeSpec with Matchers {
*
* "A ListBuffer" - {
*
* val buf = ListBuffer.empty[Int] // This implements "A ListBuffer"
*
* "should be empty when created" in {
*
* // This test sees:
* // val buf = ListBuffer.empty[Int]
* // So buf is: ListBuffer()
*
* buf should be ('empty)
* }
*
* "when 1 is appended" - {
*
* buf += 1 // This implements "when 1 is appended", etc...
*
* "should contain 1" in {
*
* // This test sees:
* // val buf = ListBuffer.empty[Int]
* // buf += 1
* // So buf is: ListBuffer(1)
*
* buf.remove(0) should equal (1)
* buf should be ('empty)
* }
*
* "when 2 is appended" - {
*
* buf += 2
*
* "should contain 1 and 2" in {
*
* // This test sees:
* // val buf = ListBuffer.empty[Int]
* // buf += 1
* // buf += 2
* // So buf is: ListBuffer(1, 2)
*
* buf.remove(0) should equal (1)
* buf.remove(0) should equal (2)
* buf should be ('empty)
* }
*
* "when 2 is removed" - {
*
* buf -= 2
*
* "should contain only 1 again" in {
*
* // This test sees:
* // val buf = ListBuffer.empty[Int]
* // buf += 1
* // buf += 2
* // buf -= 2
* // So buf is: ListBuffer(1)
*
* buf.remove(0) should equal (1)
* buf should be ('empty)
* }
* }
*
* "when 3 is appended" - {
*
* buf += 3
*
* "should contain 1, 2, and 3" in {
*
* // This test sees:
* // val buf = ListBuffer.empty[Int]
* // buf += 1
* // buf += 2
* // buf += 3
* // So buf is: ListBuffer(1, 2, 3)
*
* buf.remove(0) should equal (1)
* buf.remove(0) should equal (2)
* buf.remove(0) should equal (3)
* buf should be ('empty)
* }
* }
* }
*
* "when 88 is appended" - {
*
* buf += 88
*
* "should contain 1 and 88" in {
*
* // This test sees:
* // val buf = ListBuffer.empty[Int]
* // buf += 1
* // buf += 88
* // So buf is: ListBuffer(1, 88)
*
* buf.remove(0) should equal (1)
* buf.remove(0) should equal (88)
* buf should be ('empty)
* }
* }
* }
*
* "should have size 0 when created" in {
*
* // This test sees:
* // val buf = ListBuffer.empty[Int]
* // So buf is: ListBuffer()
*
* buf should have size 0
* }
* }
* }
*
*
*
* Note that the above class is organized by writing a bit of specification text that opens a new block followed
* by, at the top of the new block, some code that "implements" or "performs" what is described in the text. This is repeated as
* the mutable object (here, a ListBuffer), is prepared for the enclosed tests. For example:
*
*
*
* "A ListBuffer" - {
* val buf = ListBuffer.empty[Int]
*
*
*
* Or:
*
*
*
* "when 2 is appended" - {
* buf += 2
*
*
*
* Note also that although each test mutates the ListBuffer, none of the other tests observe those
* side effects:
*
*
*
* "should contain 1" in {
*
* buf.remove(0) should equal (1)
* // ...
* }
*
* "when 2 is appended" - {
*
* buf += 2
*
* "should contain 1 and 2" in {
*
* // This test does not see the buf.remove(0) from the previous test,
* // so the first element in the ListBuffer is again 1
* buf.remove(0) should equal (1)
* buf.remove(0) should equal (2)
*
*
*
* This kind of isolation of tests from each other is a consequence of running each test in its own instance of the test
* class, and can also be achieved by simply mixing OneInstancePerTest into a regular
* org.scalatest.freespec.PathAnyFreeSpec. However, PathAnyFreeSpec takes isolation one step further: a test
* in a PathAnyFreeSpec does not observe side effects performed outside tests in earlier blocks that do not
* enclose it. Here's an example:
*
*
*
* "when 2 is removed" - {
*
* buf -= 2
*
* // ...
* }
*
* "when 3 is appended" - {
*
* buf += 3
*
* "should contain 1, 2, and 3" in {
*
* // This test does not see the buf -= 2 from the earlier "when 2 is removed" block,
* // because that block does not enclose this test, so the second element in the
* // ListBuffer is still 2
* buf.remove(0) should equal (1)
* buf.remove(0) should equal (2)
* buf.remove(0) should equal (3)
*
*
*
* Running the full ExampleSpec, shown above, in the Scala interpeter would give you:
*
*
*
* scala> import org.scalatest._
* import org.scalatest._
*
* scala> run(new ExampleSpec)
* ExampleSpec:
* A ListBuffer
* - should be empty when created
* when 1 is appended
* - should contain 1
* when 2 is appended
* - should contain 1 and 2
* when 2 is removed
* - should contain only 1 again
* when 3 is appended
* - should contain 1, 2, and 3
* when 88 is appended
* - should contain 1 and 88
* - should have size 0 when created
*
*
*
* Note: class PathAnyFreeSpec's approach to isolation was inspired in part by the
* specsy framework, written by Esko Luontola.
*
*
* Shared fixtures
*
*
* A test fixture is objects or other artifacts (such as files, sockets, database
* connections, etc.) used by tests to do their work.
* If a fixture is used by only one test, then the definitions of the fixture objects can
* be local to the method. If multiple tests need to share an immutable fixture, you can simply
* assign them to instance variables. If multiple tests need to share mutable fixture objects or vars,
* there's one and only one way to do it in a PathAnyFreeSpec: place the mutable objects lexically before
* the test. Any mutations needed by the test must be placed lexically before and/or after the test.
* As used here, "Lexically before" means that the code needs to be executed during construction of that test's
* instance of the test class to reach the test (or put another way, the
* code is along the "path to the test.") "Lexically after" means that the code needs to be executed to exit the
* constructor after the test has been executed.
*
*
*
* The reason lexical placement is the one and only one way to share fixtures in a PathAnyFreeSpec is because
* all of its lifecycle methods are overridden and declared final. Thus you can't mix in BeforeAndAfter or
* BeforeAndAfterEach, because both override runTest, which is final in
* a PathAnyFreeSpec. You also can't override withFixture, because PathAnyFreeSpec
* extends Suite not TestSuite,
* where withFixture is defined. In short:
*
*
*
*
*
*
* In a path.FreeSpec, if you need some code to execute before a test, place that code lexically before
* the test. If you need some code to execute after a test, place that code lexically after the test.
*
*
*
*
*
*
* The reason the life cycle methods are final, by the way, is to prevent users from attempting to combine
* a PathAnyFreeSpec's approach to isolation with other ways ScalaTest provides to share fixtures or
* execute tests, because doing so could make the resulting test code hard to reason about. A
* PathAnyFreeSpec's execution model is a bit magical, but because it executes in one and only one
* way, users should be able to reason about the code.
* To help you visualize how a PathAnyFreeSpec is executed, consider the following variant of
* ExampleSpec that includes print statements:
*
*
*
* import org.scalatest.freespec
* import org.scalatest.matchers.Matchers
* import scala.collection.mutable.ListBuffer
*
* class ExampleSpec extends PathAnyFreeSpec with Matchers {
*
* println("Start of: ExampleSpec")
* "A ListBuffer" - {
*
* println("Start of: A ListBuffer")
* val buf = ListBuffer.empty[Int]
*
* "should be empty when created" in {
*
* println("In test: should be empty when created; buf is: " + buf)
* buf should be ('empty)
* }
*
* "when 1 is appended" - {
*
* println("Start of: when 1 is appended")
* buf += 1
*
* "should contain 1" in {
*
* println("In test: should contain 1; buf is: " + buf)
* buf.remove(0) should equal (1)
* buf should be ('empty)
* }
*
* "when 2 is appended" - {
*
* println("Start of: when 2 is appended")
* buf += 2
*
* "should contain 1 and 2" in {
*
* println("In test: should contain 1 and 2; buf is: " + buf)
* buf.remove(0) should equal (1)
* buf.remove(0) should equal (2)
* buf should be ('empty)
* }
*
* "when 2 is removed" - {
*
* println("Start of: when 2 is removed")
* buf -= 2
*
* "should contain only 1 again" in {
*
* println("In test: should contain only 1 again; buf is: " + buf)
* buf.remove(0) should equal (1)
* buf should be ('empty)
* }
*
* println("End of: when 2 is removed")
* }
*
* "when 3 is appended" - {
*
* println("Start of: when 3 is appended")
* buf += 3
*
* "should contain 1, 2, and 3" in {
*
* println("In test: should contain 1, 2, and 3; buf is: " + buf)
* buf.remove(0) should equal (1)
* buf.remove(0) should equal (2)
* buf.remove(0) should equal (3)
* buf should be ('empty)
* }
* println("End of: when 3 is appended")
* }
*
* println("End of: when 2 is appended")
* }
*
* "when 88 is appended" - {
*
* println("Start of: when 88 is appended")
* buf += 88
*
* "should contain 1 and 88" in {
*
* println("In test: should contain 1 and 88; buf is: " + buf)
* buf.remove(0) should equal (1)
* buf.remove(0) should equal (88)
* buf should be ('empty)
* }
*
* println("End of: when 88 is appended")
* }
*
* println("End of: when 1 is appended")
* }
*
* "should have size 0 when created" in {
*
* println("In test: should have size 0 when created; buf is: " + buf)
* buf should have size 0
* }
*
* println("End of: A ListBuffer")
* }
* println("End of: ExampleSpec")
* println()
* }
*
*
*
* Running the above version of ExampleSpec in the Scala interpreter will give you output similar to:
*
*
*
* scala> import org.scalatest._
* import org.scalatest._
*
* scala> run(new ExampleSpec)
* ExampleSpec:
* Start of: ExampleSpec
* Start of: A ListBuffer
* In test: should be empty when created; buf is: ListBuffer()
* End of: A ListBuffer
* End of: ExampleSpec
*
* Start of: ExampleSpec
* Start of: A ListBuffer
* Start of: when 1 is appended
* In test: should contain 1; buf is: ListBuffer(1)
* ExampleSpec:
* End of: when 1 is appended
* End of: A ListBuffer
* End of: ExampleSpec
*
* Start of: ExampleSpec
* Start of: A ListBuffer
* Start of: when 1 is appended
* Start of: when 2 is appended
* In test: should contain 1 and 2; buf is: ListBuffer(1, 2)
* End of: when 2 is appended
* End of: when 1 is appended
* End of: A ListBuffer
* End of: ExampleSpec
*
* Start of: ExampleSpec
* Start of: A ListBuffer
* Start of: when 1 is appended
* Start of: when 2 is appended
* Start of: when 2 is removed
* In test: should contain only 1 again; buf is: ListBuffer(1)
* End of: when 2 is removed
* End of: when 2 is appended
* End of: when 1 is appended
* End of: A ListBuffer
* End of: ExampleSpec
*
* Start of: ExampleSpec
* Start of: A ListBuffer
* Start of: when 1 is appended
* Start of: when 2 is appended
* Start of: when 3 is appended
* In test: should contain 1, 2, and 3; buf is: ListBuffer(1, 2, 3)
* End of: when 3 is appended
* End of: when 2 is appended
* End of: when 1 is appended
* End of: A ListBuffer
* End of: ExampleSpec
*
* Start of: ExampleSpec
* Start of: A ListBuffer
* Start of: when 1 is appended
* Start of: when 88 is appended
* In test: should contain 1 and 88; buf is: ListBuffer(1, 88)
* End of: when 88 is appended
* End of: when 1 is appended
* End of: A ListBuffer
* End of: ExampleSpec
*
* Start of: ExampleSpec
* Start of: A ListBuffer
* In test: should have size 0 when created; buf is: ListBuffer()
* End of: A ListBuffer
* End of: ExampleSpec
*
* A ListBuffer
* - should be empty when created
* when 1 is appended
* - should contain 1
* when 2 is appended
* - should contain 1 and 2
* when 2 is removed
* - should contain only 1 again
* when 3 is appended
* - should contain 1, 2, and 3
* when 88 is appended
* - should contain 1 and 88
* - should have size 0 when created
*
*
*
* Note that each test is executed in order of appearance in the PathAnyFreeSpec, and that only
* those println statements residing in blocks that enclose the test being run are executed. Any
* println statements in blocks that do not form the "path" to a test are not executed in the
* instance of the class that executes that test.
*
*
*
* How it executes
*
*
* To provide its special brand of test isolation, PathAnyFreeSpec executes quite differently from its
* sister class in org.scalatest.freespec. An org.scalatest.freespec.PathAnyFreeSpec
* registers tests during construction and executes them when run is invoked. An
* org.scalatest.path.FreeSpec, by contrast, runs each test in its own instance while that
* instance is being constructed. During construction, it registers not the tests to run, but the results of
* running those tests. When run is invoked on a PathAnyFreeSpec, it reports the registered
* results and does not run the tests again. If run is invoked a second or third time, in fact,
* a PathAnyFreeSpec will each time report the same results registered during construction. If you want
* to run the tests of a PathAnyFreeSpec anew, you'll need to create a new instance and invoke
* run on that.
*
*
*
* A PathAnyFreeSpec will create one instance for each "leaf" node it contains. The main kind of leaf node is
* a test, such as:
*
*
*
* // One instance will be created for each test
* "should be empty when created" in {
* buf should be ('empty)
* }
*
*
*
* However, an empty scope (a scope that contains no tests or nested scopes) is also a leaf node:
*
*
*
* // One instance will be created for each empty scope
* "when 99 is added" - {
* // A scope is "empty" and therefore a leaf node if it has no
* // tests or nested scopes, though it may have other code (which
* // will be executed in the instance created for that leaf node)
* buf += 99
* }
*
*
*
* The tests will be executed sequentially, in the order of appearance. The first test (or empty scope,
* if that is first) will be executed when a class that mixes in path.FreeSpec is
* instantiated. Only the first test will be executed during this initial instance, and of course, only
* the path to that test. Then, the first time the client uses the initial instance (by invoking one of run,
* expectedTestsCount, tags, or testNames on the instance), the initial instance will,
* before doing anything else, ensure that any remaining tests are executed, each in its own instance.
*
*
*
* To ensure that the correct path is taken in each instance, and to register its test results, the initial
* PathAnyFreeSpec instance must communicate with the other instances it creates for running any subsequent
* leaf nodes. It does so by setting a thread-local variable prior to creating each instance (a technique
* suggested by Esko Luontola). Each instance
* of PathAnyFreeSpec checks the thread-local variable. If the thread-local is not set, it knows it
* is an initial instance and therefore executes every block it encounters until it discovers, and executes the
* first test (or empty scope, if that's the first leaf node). It then discovers, but does not execute the next
* leaf node, or discovers there are no other leaf nodes remaining to execute. It communicates the path to the next
* leaf node, if any, and the result of running the test it did execute, if any, back to the initial instance. The
* initial instance repeats this process until all leaf nodes have been executed and all test results registered.
*
*
*
* Ignored tests
*
*
* You mark a test as ignored in an org.scalatest.freespec.PathAnyFreeSpec in the same manner as in
* an org.scalatest.freespec.AnyFreeSpec. Please see the Ignored tests section
* in its documentation for more information.
*
*
*
* Note that a separate instance will be created for an ignored test,
* and the path to the ignored test will be executed in that instance, but the test function itself will not
* be executed. Instead, a TestIgnored event will be fired.
*
*
*
* Informers
*
*
* You output information using Informers in an org.scalatest.freespec.PathAnyFreeSpec in the same manner
* as in an org.scalatest.freespec.AnyFreeSpec. Please see the Informers
* section in its documentation for more information.
*
*
*
* Pending tests
*
*
* You mark a test as pending in an org.scalatest.freespec.PathAnyFreeSpec in the same manner as in
* an org.scalatest.freespec.AnyFreeSpec. Please see the Pending tests
* section in its documentation for more information.
*
*
*
* Note that a separate instance will be created for a pending test,
* and the path to the ignored test will be executed in that instance, as well as the test function (up until it
* completes abruptly with a TestPendingException).
*
*
*
* Tagging tests
*
*
* You can place tests into groups by tagging them in an org.scalatest.freespec.PathAnyFreeSpec in the same manner
* as in an org.scalatest.freespec.AnyFreeSpec. Please see the Tagging tests
* section in its documentation for more information.
*
*
*
* Note that one difference between this class and its sister class
* org.scalatest.freespec.AnyFreeSpec is that because tests are executed at construction time, rather than each
* time run is invoked, an org.scalatest.freespec.PathAnyFreeSpec will always execute all non-ignored tests. When
* run is invoked on a PathAnyFreeSpec, if some tests are excluded based on tags, the registered
* results of running those tests will not be reported. (But those tests will have already run and the results
* registered.) By contrast, because an org.scalatest.freespec.PathAnyFreeSpec only executes tests after run
* has been called, and at that time the tags to include and exclude are known, only tests selected by the tags
* will be executed.
*
*
*
* In short, in an org.scalatest.freespec.AnyFreeSpec, tests not selected by the tags to include
* and exclude specified for the run (via the Filter passed to run) will not be executed.
* In an org.scalatest.freespec.PathAnyFreeSpec, by contrast, all non-ignored tests will be executed, each
* during the construction of its own instance, and tests not selected by the tags to include and exclude specified
* for a run will not be reported. (One upshot of this is that if you have tests that you want to tag as being slow so
* you can sometimes exclude them during a run, you probably don't want to put them in a PathAnyFreeSpec. Because
* in a PathFreespec the slow tests will be run regardless, with only their registered results not being reported
* if you exclude slow tests during a run.)
*
*
* Shared tests
*
* You can factor out shared tests in an org.scalatest.freespec.PathAnyFreeSpec in the same manner as in
* an org.scalatest.freespec.AnyFreeSpec. Please see the Shared tests
* section in its documentation for more information.
*
*
* Nested suites
*
*
* Nested suites are not allowed in a PathAnyFreeSpec. Because
* a PathAnyFreeSpec executes tests eagerly at construction time, registering the results of those test runs
* and reporting them later when run is invoked, the order of nested suites versus test runs would be
* different in a org.scalatest.freespec.PathAnyFreeSpec than in an org.scalatest.freespec.AnyFreeSpec. In
* org.scalatest.freespec.AnyFreeSpec's implementation of run, nested suites are executed then tests
* are executed. A org.scalatest.freespec.PathAnyFreeSpec with nested suites would execute these in the opposite
* order: first tests then nested suites. To help make PathAnyFreeSpec code easier to
* reason about by giving readers of one less difference to think about, nested suites are not allowed. If you want
* to add nested suites to a PathAnyFreeSpec, you can instead wrap them all in a
* Suites object. They will
* be executed in the order of appearance (unless a Distributor is passed, in which case
* they will execute in parallel).
*
*
* Durations
*
* Many ScalaTest events include a duration that indicates how long the event being reported took to execute. For
* example, a TestSucceeded event provides a duration indicating how long it took for that test
* to execute. A SuiteCompleted event provides a duration indicating how long it took for that entire
* suite of tests to execute.
*
*
*
* In the test completion events fired by a PathAnyFreeSpec (TestSucceeded,
* TestFailed, or TestPending), the durations reported refer
* to the time it took for the tests to run. This time is registered with the test results and reported along
* with the test results each time run is invoked.
* By contrast, the suite completion events fired for a path.FreeSpec represent the amount of time
* it took to report the registered results. (These events are not fired by path.FreeSpec, but instead
* by the entity that invokes run on the path.FreeSpec.) As a result, the total time
* for running the tests of a PathAnyFreeSpec, calculated by summing the durations of all the individual
* test completion events, may be greater than the duration reported for executing the entire suite.
*
*
* @author Bill Venners
* @author Chua Chee Seng
*/
@Finders(Array("org.scalatest.finders.FreeSpecFinder"))
// SKIP-SCALATESTJS,NATIVE-START
open class PathAnyFreeSpec extends org.scalatest.freespec.PathAnyFreeSpecLike {
// SKIP-SCALATESTJS,NATIVE-END
//SCALATESTJS,NATIVE-ONLY abstract class PathAnyFreeSpec extends org.scalatest.freespec.PathAnyFreeSpecLike {
/**
* Returns a user friendly string for this suite, composed of the
* simple name of the class (possibly simplified further by removing dollar signs if added by the Scala interpeter) and, if this suite
* contains nested suites, the result of invoking toString on each
* of the nested suites, separated by commas and surrounded by parentheses.
*
* @return a user-friendly string for this suite
*/
override def toString: String = Suite.suiteToString(None, this)
}