• Home
• org.scalatest
• scalatest_2.8.1
• 1.8
• source code
• FlatSpec.scala

×

Project download

Many resources are needed to download a project. Please understand that we have to compensate our server costs. Thank you in advance.
Project price only 1 $

You can buy this project and download/modify it how often you want.

org.scalatest.FlatSpec.scala Maven / Gradle / Ivy

/*
 * Copyright 2001-2009 Artima, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
package org.scalatest

import verb.{ResultOfTaggedAsInvocation, ResultOfStringPassedToVerb, BehaveWord, ShouldVerb, MustVerb, CanVerb}
import NodeFamily._
import scala.collection.immutable.ListSet
import org.scalatest.exceptions.StackDepthExceptionHelper.getStackDepth
import java.util.concurrent.atomic.AtomicReference
import java.util.ConcurrentModificationException
import org.scalatest.events._
import Suite.anErrorThatShouldCauseAnAbort

/**
 * Trait that facilitates a “behavior-driven” style of development (BDD), in which tests
 * are combined with text that specifies the behavior the tests verify.
 * (In BDD, the word example is usually used instead of test. The word test will not appear
 * in your code if you use FlatSpec, so if you prefer the word example you can use it. However, in this documentation
 * the word test will be used, for clarity and to be consistent with the rest of ScalaTest.)
 * Trait FlatSpec is so named because
 * your specification text and tests line up flat against the left-side indentation level, with no nesting needed.
 * 

 *
 * 

 * FlatSpec's no-nesting approach contrasts with traits FunSpec and WordSpec, which use nesting
 * to reduce duplication of specification text. Although nesting does have the advantage of reducing text duplication,
 * figuring out the full specification text for one test can require back-tracking out of several levels of nesting, mentally prepending
 * each fragment of text encountered. Thus the tradeoff with the nesting approach of FunSpec and WordSpec is that
 * they have less duplicated text at the cost of being a bit challenging to read. Trait FlatSpec offers the opposite
 * tradeoff. In a FlatSpec text is duplicated more, but figuring out the full specification text for a particular test is
 * easier. Here's an example FlatSpec:
 * 
 *
 * 
 * import org.scalatest.FlatSpec
 * import scala.collection.mutable.Stack
 *
 * class StackSpec extends FlatSpec {
 *
 *   behavior of "A Stack"
 *
 *   it should "pop values in last-in-first-out order" in {
 *     val stack = new Stack[Int]
 *     stack.push(1)
 *     stack.push(2)
 *     assert(stack.pop() === 2)
 *     assert(stack.pop() === 1)
 *   }
 *
 *   it should "throw NoSuchElementException if an empty stack is popped" in {
 *     val emptyStack = new Stack[String]
 *     intercept[NoSuchElementException] {
 *       emptyStack.pop()
 *     }
 *   }
 * }
 * 
 *
 * 

 * Note: you can you must or can as well as should in a FlatSpec. For example, instead of
 * it should "pop..., you could write it must "pop... or it can "pop....
 * 
 *
 * 

 * Instead of using a behavior of clause, you can alternatively use a shorthand syntax in which you replace
 * the first it with the subject string, like this:
 * 
 *
 * 
 * import org.scalatest.FlatSpec
 * import scala.collection.mutable.Stack
 *
 * class StackSpec extends FlatSpec {
 *
 *   "A Stack" should "pop values in last-in-first-out order" in {
 *     val stack = new Stack[Int]
 *     stack.push(1)
 *     stack.push(2)
 *     assert(stack.pop() === 2)
 *     assert(stack.pop() === 1)
 *   }
 *
 *   it should "throw NoSuchElementException if an empty stack is popped" in {
 *     val emptyStack = new Stack[String]
 *     intercept[NoSuchElementException] {
 *       emptyStack.pop()
 *     }
 *   }
 * }
 * 
 *
 * 

 * Running either of the two previous three versions of StackSpec in the Scala interpreter would yield:
 * 
 * 
 * 
 * A Stack
 * - should pop values in last-in-first-out order
 * - should throw NoSuchElementException if an empty stack is popped
 * 
 *
 * 

 * In a FlatSpec you write a one (or more) sentence specification for each bit of behavior you wish to
 * specify and test. Each specification sentence has a
 * "subject," which is sometimes called the system under test (or SUT). The 
 * subject is the entity being specified and tested and also serves as the subject of the sentences you write for each test.
 * Often you will want to write multiple tests for the same subject. In a FlatSpec, you name the subject once,
 * with a behavior of clause or its shorthand, then write tests for that subject with it should/mustcan "do something" phrases.
 * Each it refers to the most recently declared subject. For example, the four tests shown in this snippet are all testing
 * a stack that contains one item:
 * 
 * 
 * 
 * behavior of "A Stack (with one item)"
 *
 * it should "be non-empty" in {}
 *
 * it should "return the top item on peek" in {}
 *
 * it should "not remove the top item on peek" in {}
 *
 * it should "remove the top item on pop" in {}
 * 
 * 
 * 

 * The same is true if the tests are written using the shorthand notation:
 * 
 *
 * 
 * "A Stack (with one item)" should "be non-empty" in {}
 *
 * it should "return the top item on peek" in {}
 *
 * it should "not remove the top item on peek" in {}
 *
 * it should "remove the top item on pop" in {}
 * 
 * 
 * 

 * In a FlatSpec, therefore, to figure out what "it" means, you just scan vertically until you find the most
 * recent use of behavior of or the shorthand notation.
 * 
 *
 * 

 * A FlatSpec's lifecycle has two phases: the registration phase and the
 * ready phase. It starts in registration phase and enters ready phase the first time
 * run is called on it. It then remains in ready phase for the remainder of its lifetime.
 * 
 *
 * 

 * Tests can only be registered while the FlatSpec is
 * in its registration phase. Any attempt to register a test after the FlatSpec has
 * entered its ready phase, i.e., after run has been invoked on the FlatSpec,
 * will be met with a thrown TestRegistrationClosedException. The recommended style
 * of using FlatSpec is to register tests during object construction as is done in all
 * the examples shown here. If you keep to the recommended style, you should never see a
 * TestRegistrationClosedException.
 * 
 *
 * 

 * See also: Getting started with FlatSpec.
 * 
 *
 * 
Ignored tests
 *
 * To support the common use case of “temporarily” disabling a test, with the
 * good intention of resurrecting the test at a later time, FlatSpec provides a method
 * ignore that can be used instead of it to register a test. For example, to temporarily
 * disable the test with the name "A Stack should throw NoSuchElementException if an empty stack is popped", just
 * change “it” into “ignore,” like this:
 * 

 *
 * 
 * import org.scalatest.FlatSpec
 * import scala.collection.mutable.Stack
 *
 * class StackSpec extends FlatSpec {
 *
 *   "A Stack" should "pop values in last-in-first-out order" in {
 *       val stack = new Stack[Int]
 *       stack.push(1)
 *       stack.push(2)
 *       assert(stack.pop() === 2)
 *       assert(stack.pop() === 1)
 *     }
 *
 *   ignore should "throw NoSuchElementException if an empty stack is popped" in {
 *     val emptyStack = new Stack[String]
 *     intercept[NoSuchElementException] {
 *       emptyStack.pop()
 *     }
 *   }
 * }
 * 
 *
 * 

 * If you run this version of StackSpec with:
 * 
 *
 * 
 * scala> (new StackSpec).execute()
 * 
 *
 * 

 * It will run only the first test and report that the second test was ignored:
 * 
 *
 * 
 * A Stack
 * - should pop values in last-in-first-out order
 * - should throw NoSuchElementException if an empty stack is popped !!! IGNORED !!!
 * 
 *
 * 

 * When using shorthand notation, you won't have an it to change into ignore for
 * the first test of each new subject. To ignore such tests, you must instead change in to ignore.
 * For example, to temporarily disable the test with the name "A Stack should pop values in last-in-first-out order",
 * change “in” into “ignore” like this:
 * 
 *
 * 
 * import org.scalatest.FlatSpec
 * import scala.collection.mutable.Stack
 *
 * class StackSpec extends FlatSpec {
 *
 *   "A Stack" should "pop values in last-in-first-out order" ignore {
 *       val stack = new Stack[Int]
 *       stack.push(1)
 *       stack.push(2)
 *       assert(stack.pop() === 2)
 *       assert(stack.pop() === 1)
 *     }
 *
 *   it should "throw NoSuchElementException if an empty stack is popped" in {
 *     val emptyStack = new Stack[String]
 *     intercept[NoSuchElementException] {
 *       emptyStack.pop()
 *     }
 *   }
 * }
 * 
 *
 * 

 * If you run this version of StackSpec with:
 * 
 *
 * 
 * scala> (new StackSpec).execute()
 * 
 *
 * 

 * It will run only the second test and report that the first test was ignored:
 * 
 *
 * 
 * A Stack
 * - should pop values in last-in-first-out order !!! IGNORED !!!
 * - should throw NoSuchElementException if an empty stack is popped
 * 
 *
 * 
Informers
 *
 * 

 * One of the parameters to the run method is a Reporter, which
 * will collect and report information about the running suite of tests.
 * Information about suites and tests that were run, whether tests succeeded or failed, 
 * and tests that were ignored will be passed to the Reporter as the suite runs.
 * Most often the reporting done by default by FlatSpec's methods will be sufficient, but
 * occasionally you may wish to provide custom information to the Reporter from a test.
 * For this purpose, an Informer that will forward information to the current Reporter
 * is provided via the info parameterless method.
 * You can pass the extra information to the Informer via its apply method.
 * The Informer will then pass the information to the Reporter via an InfoProvided event.
 * Here's an example:
 * 
 *
 * 
 * import org.scalatest.FlatSpec
 *
 * class ArithmeticSpec extends FlatSpec {
 *
 *  "The Scala language" must "add correctly" in {
 *     val sum = 2 + 3
 *     assert(sum === 5)
 *     info("addition seems to work")
 *   }
 *
 *   it must "subtract correctly" in {
 *     val diff = 7 - 2
 *     assert(diff === 5)
 *   }
 * }
 * 
 *
 * 

 * If you run this FlatSpec from the interpreter, you will see the following message
 * included in the printed report:
 * 
 *
 * 
 * scala> (new ArithmeticSpec).execute()
 * The Scala language 
 * - must add correctly
 *   + addition seems to work 
 * - must subtract correctly
 * 
 *
 * 

 * One use case for the Informer is to pass more information about a specification to the reporter. For example,
 * the GivenWhenThen trait provides methods that use the implicit info provided by FlatSpec
 * to pass such information to the reporter. Here's an example:
 * 
 *
 * 
 * import org.scalatest.FlatSpec
 * import org.scalatest.GivenWhenThen
 * 
 * class ArithmeticSpec extends FlatSpec with GivenWhenThen {
 * 
 *  "The Scala language" must "add correctly" in { 
 * 
 *     given("two integers")
 *     val x = 2
 *     val y = 3
 * 
 *     when("they are added")
 *     val sum = x + y
 * 
 *     then("the result is the sum of the two numbers")
 *     assert(sum === 5)
 *   }
 * 
 *   it must "subtract correctly" in {
 * 
 *     given("two integers")
 *     val x = 7
 *     val y = 2
 * 
 *     when("one is subtracted from the other")
 *     val diff = x - y
 * 
 *     then("the result is the difference of the two numbers")
 *     assert(diff === 5)
 *   }
 * }
 * 
 *
 * 
 * scala> (new ArithmeticSpec).execute()
 * The Scala language 
 * - must add correctly
 *   + Given two integers 
 *   + When they are added 
 *   + Then the result is the sum of the two numbers 
 * - must subtract correctly
 *   + Given two integers 
 *   + When one is subtracted from the other 
 *   + Then the result is the difference of the two numbers 
 * 
 *
 * 
Pending tests
 *
 * 

 * A pending test is one that has been given a name but is not yet implemented. The purpose of
 * pending tests is to facilitate a style of testing in which documentation of behavior is sketched
 * out before tests are written to verify that behavior (and often, before the behavior of
 * the system being tested is itself implemented). Such sketches form a kind of specification of
 * what tests and functionality to implement later.
 * 
 *
 * 

 * To support this style of testing, a test can be given a name that specifies one
 * bit of behavior required by the system being tested. The test can also include some code that
 * sends more information about the behavior to the reporter when the tests run. At the end of the test,
 * it can call method pending, which will cause it to complete abruptly with TestPendingException.
 * 
 *
 * 

 * Because tests in ScalaTest can be designated as pending with TestPendingException, both the test name and any information
 * sent to the reporter when running the test can appear in the report of a test run. (In other words,
 * the code of a pending test is executed just like any other test.) However, because the test completes abruptly
 * with TestPendingException, the test will be reported as pending, to indicate
 * the actual test, and possibly the functionality it is intended to test, has not yet been implemented.
 * You can mark tests as pending in FlatSpec like this:
 * 
 *
 * 
 * import org.scalatest.FlatSpec
 *
 * class ArithmeticSpec extends FlatSpec {
 *
 *   // Sharing fixture objects via instance variables
 *   val shared = 5
 *
 *  "The Scala language" must "add correctly" in {
 *     val sum = 2 + 3
 *     assert(sum === shared)
 *   }
 *
 *   it must "subtract correctly" is (pending)
 * }
 * 
 *
 * 

 * If you run this version of ArithmeticSpec with:
 * 
 *
 * 
 * scala> (new ArithmeticSpec).execute()
 * 
 *
 * 

 * It will run both tests but report that The Scala language must subtract correctly is pending. You'll see:
 * 
 *
 * 
 * The Scala language
 * - must add correctly
 * - must subtract correctly (pending)
 * 
 * 
 * 

 * One difference between an ignored test and a pending one is that an ignored test is intended to be used during a
 * significant refactorings of the code under test, when tests break and you don't want to spend the time to fix
 * all of them immediately. You can mark some of those broken tests as ignored temporarily, so that you can focus the red
 * bar on just failing tests you actually want to fix immediately. Later you can go back and fix the ignored tests.
 * In other words, by ignoring some failing tests temporarily, you can more easily notice failed tests that you actually
 * want to fix. By contrast, a pending test is intended to be used before a test and/or the code under test is written.
 * Pending indicates you've decided to write a test for a bit of behavior, but either you haven't written the test yet, or
 * have only written part of it, or perhaps you've written the test but don't want to implement the behavior it tests
 * until after you've implemented a different bit of behavior you realized you need first. Thus ignored tests are designed
 * to facilitate refactoring of existing code whereas pending tests are designed to facilitate the creation of new code.
 * 
 *
 * 

 * One other difference between ignored and pending tests is that ignored tests are implemented as a test tag that is
 * excluded by default. Thus an ignored test is never executed. By contrast, a pending test is implemented as a
 * test that throws TestPendingException (which is what calling the pending method does). Thus
 * the body of pending tests are executed up until they throw TestPendingException. The reason for this difference
 * is that it enables your unfinished test to send InfoProvided messages to the reporter before it completes
 * abruptly with TestPendingException, as shown in the previous example on Informers
 * that used the GivenWhenThen trait. For example, the following snippet in a FlatSpec:
 * 
 *
 * 
 *  "The Scala language" must "add correctly" in { 
 *     given("two integers")
 *     when("they are added")
 *     then("the result is the sum of the two numbers")
 *     pending
 *   }
 *   // ...
 * 
 *
 * 

 * Would yield the following output when run in the interpreter:
 * 
 *
 * 
 * The Scala language
 * - must add correctly (pending)
 *   + Given two integers 
 *   + When they are added 
 *   + Then the result is the sum of the two numbers 
 * 
 *
 * 
Tagging tests
 *
 * A FlatSpec's tests may be classified into groups by tagging them with string names.
 * As with any suite, when executing a FlatSpec, groups of tests can
 * optionally be included and/or excluded. To tag a FlatSpec's tests,
 * you pass objects that extend abstract class org.scalatest.Tag to taggedAs method
 * invoked on the string that describes the test you want to tag. Class Tag takes one parameter,
 * a string name.  If you have
 * created Java annotation interfaces for use as group names in direct subclasses of org.scalatest.Suite,
 * then you will probably want to use group names on your FlatSpecs that match. To do so, simply 
 * pass the fully qualified names of the Java interfaces to the Tag constructor. For example, if you've
 * defined Java annotation interfaces with fully qualified names, com.mycompany.tags.SlowTest and com.mycompany.tags.DbTest, then you could
 * create matching groups for FlatSpecs like this:
 * 

 *
 * 
 * import org.scalatest.Tag
 *
 * object SlowTest extends Tag("com.mycompany.tags.SlowTest")
 * object DbTest extends Tag("com.mycompany.tags.DbTest")
 * 
 *
 * 

 * Given these definitions, you could place FlatSpec tests into groups like this:
 * 
 *
 * 
 * import org.scalatest.FlatSpec
 *
 * class ExampleSpec extends FlatSpec {
 *
 *   "The Scala language" must "add correctly" taggedAs(SlowTest) in {
 *       val sum = 1 + 1
 *       assert(sum === 2)
 *     }
 *
 *   it must "subtract correctly" taggedAs(SlowTest, DbTest) in {
 *     val diff = 4 - 1
 *     assert(diff === 3)
 *   }
 * }
 * 
 *
 * 

 * This code marks both tests with the com.mycompany.tags.SlowTest tag, 
 * and test "The Scala language should subtract correctly" with the com.mycompany.tags.DbTest tag.
 * 
 *
 * 

 * The run method takes a Filter, whose constructor takes an optional
 * Set[String] called tagsToInclude and a Set[String] called
 * tagsToExclude. If tagsToInclude is None, all tests will be run
 * except those those belonging to tags listed in the
 * tagsToExclude Set. If tagsToInclude is defined, only tests
 * belonging to tags mentioned in the tagsToInclude set, and not mentioned in tagsToExclude,
 * will be run.
 * 
 *
 * 
Shared fixtures
 *
 * 

 * A test fixture is objects or other artifacts (such as files, sockets, database
 * connections, etc.) used by tests to do their work.
 * If a fixture is used by only one test method, then the definitions of the fixture objects can
 * be local to the method, such as the objects assigned to sum and diff in the
 * previous ExampleSpec examples. If multiple methods need to share an immutable fixture, one approach
 * is to assign them to instance variables.
 * 
 *
 * 

 * In some cases, however, shared mutable fixture objects may be changed by test methods such that
 * they need to be recreated or reinitialized before each test. Shared resources such
 * as files or database connections may also need to 
 * be created and initialized before, and cleaned up after, each test. JUnit 3 offered methods setUp and
 * tearDown for this purpose. In ScalaTest, you can use the BeforeAndAfterEach trait,
 * which will be described later, to implement an approach similar to JUnit's setUp
 * and tearDown, however, this approach usually involves reassigning vars or mutating objects
 * between tests. Before going that route, you may wish to consider some more functional approaches that
 * avoid side effects.
 * 
 *
 * 
Calling create-fixture methods
 *
 * 

 * One approach is to write one or more create-fixture methods
 * that return a new instance of a needed fixture object (or an holder object containing multiple needed fixture objects) each time it
 * is called. You can then call a create-fixture method at the beginning of each
 * test method that needs the fixture, storing the returned object or objects in local variables. Here's an example:
 * 
 *
 * 
 * import org.scalatest.FlatSpec
 * import collection.mutable.ListBuffer
 *
 * class ExampleSpec extends FlatSpec {
 * 
 *   def fixture =
 *     new {
 *       val builder = new StringBuilder("ScalaTest is ")
 *       val buffer = new ListBuffer[String]
 *     }
 * 
 *   "Testing" should "be easy" in {
 *     val f = fixture
 *     f.builder.append("easy!")
 *     assert(f.builder.toString === "ScalaTest is easy!")
 *     assert(f.buffer.isEmpty)
 *     f.buffer += "sweet"
 *   }
 * 
 *   it should "be fun" in {
 *     val f = fixture
 *     f.builder.append("fun!")
 *     assert(f.builder.toString === "ScalaTest is fun!")
 *     assert(f.buffer.isEmpty)
 *   }
 * }
 * 
 *
 * 

 * The “f.” in front of each use of a fixture object provides a visual indication of which objects 
 * are part of the fixture, but if you prefer, you can import the the members with “import f._” and use the names directly.
 * 
 *
 * 
Instantiating fixture traits
 *
 * 

 * A related technique is to place
 * the fixture objects in a fixture trait and run your test code in the context of a new anonymous class instance that mixes in
 * the fixture trait, like this:
 * 
 *
 * 
 * import org.scalatest.FlatSpec
 * import collection.mutable.ListBuffer
 * 
 * class ExampleSpec extends FlatSpec {
 * 
 *   trait Fixture {
 *     val builder = new StringBuilder("ScalaTest is ")
 *     val buffer = new ListBuffer[String]
 *   }
 * 
 *   "Testing" should "be easy" in {
 *     new Fixture {
 *       builder.append("easy!")
 *       assert(builder.toString === "ScalaTest is easy!")
 *       assert(buffer.isEmpty)
 *       buffer += "sweet"
 *     }
 *   }
 * 
 *   it should "be fun" in {
 *     new Fixture {
 *       builder.append("fun!")
 *       assert(builder.toString === "ScalaTest is fun!")
 *       assert(buffer.isEmpty)
 *     }
 *   }
 * }
 * 
 *
 * 
Mixing in OneInstancePerTest
 *
 * 

 * If every test method requires the same set of
 * mutable fixture objects, one other approach you can take is make them simply vals and mix in trait
 * OneInstancePerTest.  If you mix in OneInstancePerTest, each test
 * will be run in its own instance of the Suite, similar to the way JUnit tests are executed. Here's an example:
 * 
 *
 * 
 * import org.scalatest.FlatSpec
 * import org.scalatest.OneInstancePerTest
 * import collection.mutable.ListBuffer
 * 
 * class ExampleSpec extends FlatSpec with OneInstancePerTest {
 * 
 *   val builder = new StringBuilder("ScalaTest is ")
 *   val buffer = new ListBuffer[String]
 * 
 *   "Testing" should "be easy" in {
 *     builder.append("easy!")
 *     assert(builder.toString === "ScalaTest is easy!")
 *     assert(buffer.isEmpty)
 *     buffer += "sweet"
 *   }
 * 
 *   it should "be fun" in {
 *     builder.append("fun!")
 *     assert(builder.toString === "ScalaTest is fun!")
 *     assert(buffer.isEmpty)
 *   }
 * }
 * 
 *
 * 

 * Although the create-fixture, fixture-trait, and OneInstancePerTest approaches take care of setting up a fixture before each
 * test, they don't address the problem of cleaning up a fixture after the test completes. In this situation, you'll need to either
 * use side effects or the loan pattern.
 * 
 *
 * 
Mixing in BeforeAndAfter
 *
 * 

 * One way to use side effects is to mix in the BeforeAndAfter trait.
 * With this trait you can denote a bit of code to run before each test with before and/or after each test
 * each test with after, like this:
 * 
 * 
 * 
 * import org.scalatest.FlatSpec
 * import org.scalatest.BeforeAndAfter
 * import collection.mutable.ListBuffer
 * 
 * class ExampleSpec extends FlatSpec with BeforeAndAfter {
 * 
 *   val builder = new StringBuilder
 *   val buffer = new ListBuffer[String]
 * 
 *   before {
 *     builder.append("ScalaTest is ")
 *   }
 * 
 *   after {
 *     builder.clear()
 *     buffer.clear()
 *   }
 * 
 *   "Testing" should "be easy" in {
 *     builder.append("easy!")
 *     assert(builder.toString === "ScalaTest is easy!")
 *     assert(buffer.isEmpty)
 *     buffer += "sweet"
 *   }
 * 
 *   it should "be fun" in {
 *     builder.append("fun!")
 *     assert(builder.toString === "ScalaTest is fun!")
 *     assert(buffer.isEmpty)
 *   }
 * }
 * 
 * 
 * 
Overriding withFixture(NoArgTest)
 *
 * 

 * An alternate way to take care of setup and cleanup via side effects
 * is to override withFixture. Trait Suite's implementation of
 * runTest, which is inherited by this trait, passes a no-arg test function to withFixture. It is withFixture's
 * responsibility to invoke that test function.  Suite's implementation of withFixture simply
 * invokes the function, like this:
 * 
 *
 * 
 * // Default implementation
 * protected def withFixture(test: NoArgTest) {
 *   test()
 * }
 * 
 *
 * 

 * You can, therefore, override withFixture to perform setup before, and cleanup after, invoking the test function. If
 * you have cleanup to perform, you should invoke the test function
 * inside a try block and perform the cleanup in a finally clause.
 * Here's an example:
 * 
 *
 * 
 * import org.scalatest.FlatSpec
 * import collection.mutable.ListBuffer
 *
 * class ExampleSpec extends FlatSpec {
 *
 *   val builder = new StringBuilder
 *   val buffer = new ListBuffer[String]
 *
 *   override def withFixture(test: NoArgTest) {
 *     builder.append("ScalaTest is ") // perform setup
 *     try {
 *       test() // invoke the test function
 *     }
 *     finally {
 *       builder.clear() // perform cleanup
 *       buffer.clear()
 *     }
 *   }
 *
 *   "Testing" should "be easy" in {
 *     builder.append("easy!")
 *     assert(builder.toString === "ScalaTest is easy!")
 *     assert(buffer.isEmpty)
 *     buffer += "sweet"
 *   }
 *
 *   it should "be fun" in {
 *     builder.append("fun!")
 *     assert(builder.toString === "ScalaTest is fun!")
 *     assert(buffer.isEmpty)
 *     buffer += "clear"
 *   }
 * }
 * 
 *
 * 

 * Note that the NoArgTest passed to withFixture, in addition to
 * an apply method that executes the test, also includes the test name as well as the config
 * map passed to runTest. Thus you can also use the test name and configuration objects in withFixture.
 * 
 *
 * 

 * The reason you should perform cleanup in a finally clause is that withFixture is called by
 * runTest, which expects an exception to be thrown to indicate a failed test. Thus when you invoke
 * the test function inside withFixture, it may complete abruptly with an exception. The finally
 * clause will ensure the fixture cleanup happens as that exception propagates back up the call stack to runTest.
 * 
 *
 * 
Overriding withFixture(OneArgTest)
 *
 * 

 * To use the loan pattern, you can extend fixture.FlatSpec (from the org.scalatest.fixture package) instead of
 * FlatSpec. Each test in a fixture.FlatSpec takes a fixture as a parameter, allowing you to pass the fixture into
 * the test. You must indicate the type of the fixture parameter by specifying FixtureParam, and implement a
 * withFixture method that takes a OneArgTest. This withFixture method is responsible for
 * invoking the one-arg test function, so you can perform fixture set up before, and clean up after, invoking and passing
 * the fixture into the test function. Here's an example:
 * 
 *
 * 
 * import org.scalatest.fixture
 * import java.io.FileWriter
 * import java.io.File
 * 
 * class ExampleSpec extends fixture.FlatSpec {
 * 
 *   final val tmpFile = "temp.txt"
 * 
 *   type FixtureParam = FileWriter
 * 
 *   def withFixture(test: OneArgTest) {
 * 
 *     val writer = new FileWriter(tmpFile) // set up the fixture
 *     try {
 *       test(writer) // "loan" the fixture to the test
 *     }
 *     finally {
 *       writer.close() // clean up the fixture
 *     }
 *   }
 * 
 *   "Testing" should "be easy" in { writer =>
 *     writer.write("Hello, test!")
 *     writer.flush()
 *     assert(new File(tmpFile).length === 12)
 *   }
 * 
 *   it should "be fun" in { writer =>
 *     writer.write("Hi, test!")
 *     writer.flush()
 *     assert(new File(tmpFile).length === 9)
 *   }
 * }
 * 
 *
 * 

 * For more information, see the documentation for fixture.FlatSpec.
 * 
 *
 * 
Providing different fixtures to different tests
 * 
 * 

 * If different tests in the same FlatSpec require different fixtures, you can combine the previous techniques and
 * provide each test with just the fixture or fixtures it needs. Here's an example in which a StringBuilder and a
 * ListBuffer are provided via fixture traits, and file writer (that requires cleanup) is provided via the loan pattern:
 * 
 *
 * 
 * import java.io.FileWriter
 * import java.io.File
 * import collection.mutable.ListBuffer
 * import org.scalatest.FlatSpec
 * 
 * class ExampleSpec extends FlatSpec {
 * 
 *   final val tmpFile = "temp.txt"
 * 
 *   trait Builder {
 *     val builder = new StringBuilder("ScalaTest is ")
 *   }
 * 
 *   trait Buffer {
 *     val buffer = ListBuffer("ScalaTest", "is")
 *   }
 * 
 *   def withWriter(testCode: FileWriter => Any) {
 *     val writer = new FileWriter(tmpFile) // set up the fixture
 *     try {
 *       testCode(writer) // "loan" the fixture to the test
 *     }
 *     finally {
 *       writer.close() // clean up the fixture
 *     }
 *   }
 * 
 *   "Testing" should "be productive" in { // This test needs the StringBuilder fixture
 *     new Builder {
 *       builder.append("productive!")
 *       assert(builder.toString === "ScalaTest is productive!")
 *     }
 *   }
 * 
 *   it should "be readable" in { // This test needs the ListBuffer[String] fixture
 *     new Buffer {
 *       buffer += ("readable!")
 *       assert(buffer === List("ScalaTest", "is", "readable!"))
 *     }
 *   }
 * 
 *   it should "be user-friendly" in { // This test needs the FileWriter fixture
 *     withWriter { writer =>
 *       writer.write("Hello, user!")
 *       writer.flush()
 *       assert(new File(tmpFile).length === 12)
 *     }
 *   }
 * 
 *   "Test code" should "be clear and concise" in { // This test needs the StringBuilder and ListBuffer
 *     new Builder with Buffer {
 *       builder.append("clear!")
 *       buffer += ("concise!")
 *       assert(builder.toString === "ScalaTest is clear!")
 *       assert(buffer === List("ScalaTest", "is", "concise!"))
 *     }
 *   }
 * 
 *   it should "be composable" in { // This test needs all three fixtures
 *     new Builder with Buffer {
 *       builder.append("clear!")
 *       buffer += ("concise!")
 *       assert(builder.toString === "ScalaTest is clear!")
 *       assert(buffer === List("ScalaTest", "is", "concise!"))
 *       withWriter { writer =>
 *         writer.write(builder.toString)
 *         writer.flush()
 *         assert(new File(tmpFile).length === 19)
 *       }
 *     }
 *   }
 * }
 * 
 *
 * 

 * In the previous example, ScalaTest should be productive uses only the StringBuilder fixture, so it just instantiates
 * a new Builder, whereas it should be readable uses only the ListBuffer fixture, so it just intantiates
 * a new Buffer. it should be user-friendly needs just the FileWriter fixture, so it invokes
 * withWriter, which prepares and passes a FileWriter to the test (and takes care of closing it afterwords).
 * 
 *
 * 

 * Two tests need multiple fixtures: Test code should be clear and concise needs both the StringBuilder and the
 * ListBuffer, so it instantiates a class that mixes in both fixture traits with new Builder with Buffer.
 * it should be composable needs all three fixtures, so in addition to new Builder with Buffer it also invokes
 * withWriter, wrapping just the of the test code that needs the fixture.
 * 
 *
 * 

 * Note that in this case, the loan pattern is being implemented via the withWriter method that takes a function, not
 * by overriding fixture.FlatSpec's withFixture(OneArgTest) method. fixture.FlatSpec makes the most sense
 * if all (or at least most) tests need the same fixture, whereas in this Suite only two tests need the
 * FileWriter.
 * 
 *
 * 

 * In the previous example, the withWriter method passed an object into
 * the tests. Passing fixture objects into tests is generally a good idea when possible, but sometimes a side affect is unavoidable.
 * For example, if you need to initialize a database running on a server across a network, your with-fixture 
 * method will likely have nothing to pass. In such cases, simply create a with-fixture method that takes a by-name parameter and
 * performs setup and cleanup via side effects, like this:
 * 
 *
 * 
 * def withDataInDatabase(test: => Any) {
 *   // initialize the database across the network
 *   try {
 *     test // "loan" the initialized database to the test
 *   }
 *   finally {
 *     // clean up the database
 *   }
 * }
 * 
 * 
 * 

 * You can then use it like:
 * 
 * 
 * 
 * "A user" should "be able to log onto the system" in {
 *   withDataInDatabase {
 *     // test user logging in scenario
 *   }
 * }
 * 
 * 
 * 
Composing stackable fixture traits
 *
 * 

 * In larger projects, teams often end up with several different fixtures that test classes need in different combinations,
 * and possibly initialized (and cleaned up) in different orders. A good way to accomplish this in ScalaTest is to factor the individual
 * fixtures into traits that can be composed using the stackable trait pattern. This can be done, for example, by placing
 * withFixture methods in several traits, each of which call super.withFixture. Here's an example in
 * which the StringBuilder and ListBuffer[String] fixtures used in the previous examples have been
 * factored out into two stackable fixture traits named Builder and Buffer:
 * 
 *
 * 
 * import org.scalatest.FlatSpec
 * import org.scalatest.AbstractSuite
 * import collection.mutable.ListBuffer
 * 
 * trait Builder extends AbstractSuite { this: Suite =>
 *
 *   val builder = new StringBuilder
 *
 *   abstract override def withFixture(test: NoArgTest) {
 *     builder.append("ScalaTest is ")
 *     try {
 *       super.withFixture(test) // To be stackable, must call super.withFixture
 *     }
 *     finally {
 *       builder.clear()
 *     }
 *   }
 * }
 *
 * trait Buffer extends AbstractSuite { this: Suite =>
 *
 *   val buffer = new ListBuffer[String]
 *
 *   abstract override def withFixture(test: NoArgTest) {
 *     try {
 *       super.withFixture(test) // To be stackable, must call super.withFixture
 *     }
 *     finally {
 *       buffer.clear()
 *     }
 *   }
 * }
 * 
 * class ExampleSpec extends FlatSpec with Builder with Buffer {
 * 
 *   "Testing" should "be easy" in {
 *     builder.append("easy!")
 *     assert(builder.toString === "ScalaTest is easy!")
 *     assert(buffer.isEmpty)
 *     buffer += "sweet"
 *   }
 * 
 *   it should "be fun" in {
 *     builder.append("fun!")
 *     assert(builder.toString === "ScalaTest is fun!")
 *     assert(buffer.isEmpty)
 *     buffer += "clear"
 *   }
 * }
 * 
 *
 * 

 * By mixing in both the Builder and Buffer traits, ExampleSpec gets both fixtures, which will be
 * initialized before each test and cleaned up after. The order the traits are mixed together determines the order of execution.
 * In this case, Builder is "super" to Buffer. If you wanted Buffer to be "super"
 * to Builder, you need only switch the order you mix them together, like this: 
 * 
 *
 * 
 * class Example2Spec extends FlatSpec with Buffer with Builder
 * 
 *
 * 

 * And if you only need one fixture you mix in only that trait:
 * 
 *
 * 
 * class Example3Spec extends FlatSpec with Builder
 * 
 *
 * 

 * Another way to create stackable fixture traits is by extending the BeforeAndAfterEach
 * and/or BeforeAndAfterAll traits.
 * BeforeAndAfterEach has a beforeEach method that will be run before each test (like JUnit's setUp),
 * and an afterEach method that will be run after (like JUnit's tearDown).
 * Similarly, BeforeAndAfterAll has a beforeAll method that will be run before all tests,
 * and an afterAll method that will be run after all tests. Here's what the previously shown example would look like if it
 * were rewritten to use the BeforeAndAfterEach methods instead of withFixture:
 * 
 *
 * 
 * import org.scalatest.FlatSpec
 * import org.scalatest.BeforeAndAfterEach
 * import collection.mutable.ListBuffer
 * 
 * trait Builder extends BeforeAndAfterEach { this: Suite =>
 * 
 *   val builder = new StringBuilder
 * 
 *   override def beforeEach() {
 *     builder.append("ScalaTest is ")
 *     super.beforeEach() // To be stackable, must call super.beforeEach
 *   }
 * 
 *   override def afterEach() {
 *     try {
 *       super.afterEach() // To be stackable, must call super.afterEach
 *     }
 *     finally {
 *       builder.clear()
 *     }
 *   }
 * }
 * 
 * trait Buffer extends BeforeAndAfterEach { this: Suite =>
 * 
 *   val buffer = new ListBuffer[String]
 * 
 *   override def afterEach() {
 *     try {
 *       super.afterEach() // To be stackable, must call super.afterEach
 *     }
 *     finally {
 *       buffer.clear()
 *     }
 *   }
 * }
 * 
 * class ExampleSpec extends FlatSpec with Builder with Buffer {
 * 
 *   "Testing" should "be easy" in {
 *     builder.append("easy!")
 *     assert(builder.toString === "ScalaTest is easy!")
 *     assert(buffer.isEmpty)
 *     buffer += "sweet"
 *   }
 * 
 *   it should "be fun" in {
 *     builder.append("fun!")
 *     assert(builder.toString === "ScalaTest is fun!")
 *     assert(buffer.isEmpty)
 *     buffer += "clear"
 *   }
 * }
 * 
 *
 * 

 * To get the same ordering as withFixture, place your super.beforeEach call at the end of each
 * beforeEach method, and the super.afterEach call at the beginning of each afterEach
 * method, as shown in the previous example. It is a good idea to invoke super.afterEach in a try
 * block and perform cleanup in a finally clause, as shown in the previous example, because this ensures the
 * cleanup code is performed even if super.afterAll throws an exception.
 * 
 *
 * 

 * One difference to bear in mind between the before-and-after traits and the withFixture methods, is that if
 * a withFixture method completes abruptly with an exception, it is considered a failed test. By contrast, if any of the
 * methods on the before-and-after traits (i.e., before  and after of BeforeAndAfter,
 * beforeEach and afterEach of BeforeAndAfterEach,
 * and beforeAll and afterAll of BeforeAndAfterAll) complete abruptly, it is considered a
 * failed suite, which will result in a SuiteAborted event.
 * 
 * 
 * 
Shared tests
 *
 * 

 * Sometimes you may want to run the same test code on different fixture objects. In other words, you may want to write tests that are "shared"
 * by different fixture objects.  To accomplish this in a FlatSpec, you first place shared tests in behavior functions.
 * These behavior functions will be invoked during the construction phase of any FlatSpec that uses them, so that the tests they
 * contain will be registered as tests in that FlatSpec.  For example, given this stack class:
 * 
 *
 * 
 * import scala.collection.mutable.ListBuffer
 * 
 * class Stack[T] {
 *
 *   val MAX = 10
 *   private val buf = new ListBuffer[T]
 *
 *   def push(o: T) {
 *     if (!full)
 *       buf.prepend(o)
 *     else
 *       throw new IllegalStateException("can't push onto a full stack")
 *   }
 *
 *   def pop(): T = {
 *     if (!empty)
 *       buf.remove(0)
 *     else
 *       throw new IllegalStateException("can't pop an empty stack")
 *   }
 *
 *   def peek: T = {
 *     if (!empty)
 *       buf(0)
 *     else
 *       throw new IllegalStateException("can't pop an empty stack")
 *   }
 *
 *   def full: Boolean = buf.size == MAX
 *   def empty: Boolean = buf.size == 0
 *   def size = buf.size
 *
 *   override def toString = buf.mkString("Stack(", ", ", ")")
 * }
 * 
 *
 * 

 * You may want to test the Stack class in different states: empty, full, with one item, with one item less than capacity,
 * etc. You may find you have several tests that make sense any time the stack is non-empty. Thus you'd ideally want to run
 * those same tests for three stack fixture objects: a full stack, a stack with a one item, and a stack with one item less than
 * capacity. With shared tests, you can factor these tests out into a behavior function, into which you pass the
 * stack fixture to use when running the tests. So in your FlatSpec for stack, you'd invoke the
 * behavior function three times, passing in each of the three stack fixtures so that the shared tests are run for all three fixtures. You
 * can define a behavior function that encapsulates these shared tests inside the FlatSpec that uses them. If they are shared
 * between different FlatSpecs, however, you could also define them in a separate trait that is mixed into each FlatSpec
 * that uses them.
 * 
 *
 * 

 * For example, here the nonEmptyStack behavior function (in this case, a behavior method) is
 * defined in a trait along with another method containing shared tests for non-full stacks:
 * 
 * 
 * 
 * trait StackBehaviors { this: FlatSpec =>
 * 
 *   def nonEmptyStack(newStack: => Stack[Int], lastItemAdded: Int) {
 *
 *     it should "be non-empty" in {
 *       assert(!newStack.empty)
 *     }
 *
 *     it should "return the top item on peek" in {
 *       assert(newStack.peek === lastItemAdded)
 *     }
 *
 *     it should "not remove the top item on peek" in {
 *       val stack = newStack
 *       val size = stack.size
 *       assert(stack.peek === lastItemAdded)
 *       assert(stack.size === size)
 *     }
 *
 *     it should "remove the top item on pop" in {
 *       val stack = newStack
 *       val size = stack.size
 *       assert(stack.pop === lastItemAdded)
 *       assert(stack.size === size - 1)
 *     }
 *   }
 *
 *   def nonFullStack(newStack: => Stack[Int]) {
 *
 *     it should "not be full" in {
 *       assert(!newStack.full)
 *     }
 *
 *     it should "add to the top on push" in {
 *       val stack = newStack
 *       val size = stack.size
 *       stack.push(7)
 *       assert(stack.size === size + 1)
 *       assert(stack.peek === 7)
 *     }
 *   }
 * }
 * 
 *
 *
 * 

 * Given these behavior functions, you could invoke them directly, but FlatSpec offers a DSL for the purpose,
 * which looks like this:
 * 
 *
 * 
 * it should behave like nonEmptyStack(stackWithOneItem, lastValuePushed)
 * it should behave like nonFullStack(stackWithOneItem)
 * 
 *
 * 

 * If you prefer to use an imperative style to change fixtures, for example by mixing in BeforeAndAfterEach and
 * reassigning a stack var in beforeEach, you could write your behavior functions
 * in the context of that var, which means you wouldn't need to pass in the stack fixture because it would be
 * in scope already inside the behavior function. In that case, your code would look like this:
 * 
 *
 * 
 * it should behave like nonEmptyStack // assuming lastValuePushed is also in scope inside nonEmptyStack
 * it should behave like nonFullStack
 * 
 *
 * 

 * The recommended style, however, is the functional, pass-all-the-needed-values-in style. Here's an example:
 * 
 *
 * 
 * class SharedTestExampleSpec extends FlatSpec with StackBehaviors {
 * 
 *   // Stack fixture creation methods
 *   def emptyStack = new Stack[Int]
 * 
 *   def fullStack = {
 *     val stack = new Stack[Int]
 *     for (i <- 0 until stack.MAX)
 *       stack.push(i)
 *     stack
 *   }
 * 
 *   def stackWithOneItem = {
 *     val stack = new Stack[Int]
 *     stack.push(9)
 *     stack
 *   }
 * 
 *   def stackWithOneItemLessThanCapacity = {
 *     val stack = new Stack[Int]
 *     for (i <- 1 to 9)
 *       stack.push(i)
 *     stack
 *   }
 * 
 *   val lastValuePushed = 9
 * 
 *   "A Stack (when empty)" should "be empty" in {
 *     assert(emptyStack.empty)
 *   }
 * 
 *   it should "complain on peek" in {
 *     intercept[IllegalStateException] {
 *       emptyStack.peek
 *     }
 *   }
 *
 *   it should "complain on pop" in {
 *     intercept[IllegalStateException] {
 *       emptyStack.pop
 *     }
 *   }
 * 
 *   "A Stack (with one item)" should behave like nonEmptyStack(stackWithOneItem, lastValuePushed)
 *
 *   it should behave like nonFullStack(stackWithOneItem)
 *     
 *   "A Stack (with one item less than capacity)" should behave like nonEmptyStack(stackWithOneItemLessThanCapacity, lastValuePushed)
 *
 *   it should behave like nonFullStack(stackWithOneItemLessThanCapacity)
 * 
 *   "A Stack (full)" should "be full" in {
 *     assert(fullStack.full)
 *   }
 * 
 *   it should behave like nonEmptyStack(fullStack, lastValuePushed)
 * 
 *   it should "complain on a push" in {
 *     intercept[IllegalStateException] {
 *       fullStack.push(10)
 *     }
 *   }
 * }
 * 
 *
 * 

 * If you load these classes into the Scala interpreter (with scalatest's JAR file on the class path), and execute it,
 * you'll see:
 * 
 *
 * 
 * scala> (new SharedTestExampleSpec).execute()
 * A Stack (when empty)
 * - should be empty
 * - should complain on peek
 * - should complain on pop
 * A Stack (with one item) 
 * - should be non-empty
 * - should return the top item on peek
 * - should not remove the top item on peek
 * - should remove the top item on pop
 * - should not be full
 * - should add to the top on push
 * A Stack (with one item less than capacity) 
 * - should be non-empty
 * - should return the top item on peek
 * - should not remove the top item on peek
 * - should remove the top item on pop
 * - should not be full
 * - should add to the top on push
 * A Stack (full) 
 * - should be full
 * - should be non-empty
 * - should return the top item on peek
 * - should not remove the top item on peek
 * - should remove the top item on pop
 * - should complain on a push
 * 
 * 
 * 

 * One thing to keep in mind when using shared tests is that in ScalaTest, each test in a suite must have a unique name.
 * If you register the same tests repeatedly in the same suite, one problem you may encounter is an exception at runtime
 * complaining that multiple tests are being registered with the same test name. A good way to solve this problem in a WordSpec is to make sure
 * each invocation of a behavior function is in the context of a different set of when, verb (should,
 * must, or can), and that clauses,
 * which will prepend a string to each test name.
 * For example, the following code in a WordSpec would register a test with the name "A Stack (when empty) should be empty":
 * 
 *
 * 
 *   behavior of "A Stack (when empty)"
 *       
 *   it should "be empty" in {
 *     assert(emptyStack.empty)
 *   }
 *   // ...
 * 
 *
 * 

 * Or, using the shorthand notation:
 * 
 *
 * 
 *   "A Stack" when {
 *     "empty" should {
 *       "be empty" in {
 *         assert(emptyStack.empty)
 *       }
 *     }
 *   }
 *   // ...
 * 
 *
 * 

 * If the "should be empty" test was factored out into a behavior function, it could be called repeatedly so long
 * as each invocation of the behavior function is in the context of a different combination
 * of when, verb, and that clauses.
 * 
 *
 * @author Bill Venners
 */
trait FlatSpec extends Suite with ShouldVerb with MustVerb with CanVerb { thisSuite =>

  private final val engine = new Engine("concurrentSpecMod", "Spec")
  import engine._

  /**
   * Returns an Informer that during test execution will forward strings (and other objects) passed to its
   * apply method to the current reporter. If invoked in a constructor, it
   * will register the passed string for forwarding later during test execution. If invoked while this
   * FlatSpec is being executed, such as from inside a test function, it will forward the information to
   * the current reporter immediately. If invoked at any other time, it will
   * throw an exception. This method can be called safely by any thread.
   */
  implicit protected def info: Informer = atomicInformer.get

  /**
   * Register a test with the given spec text, optional tags, and test function value that takes no arguments.
   * An invocation of this method is called an “example.”
   *
   * This method will register the test for later execution via an invocation of one of the execute
   * methods. The name of the test will be a concatenation of the text of all surrounding describers,
   * from outside in, and the passed spec text, with one space placed between each item. (See the documenation
   * for testNames for an example.) The resulting test name must not have been registered previously on
   * this FlatSpec instance.
   *
   * @param specText the specification text, which will be combined with the descText of any surrounding describers
   * to form the test name
   * @param testTags the optional list of tags for this test
   * @param methodName method name of the caller
   * @param testFun the test function
   * @throws DuplicateTestNameException if a test with the same name has been registered previously
   * @throws TestRegistrationClosedException if invoked after run has been invoked on this suite
   * @throws NullPointerException if specText or any passed test tag is null
   */
  private def registerTestToRun(specText: String, testTags: List[Tag], methodName: String, testFun: () => Unit) {

    // TODO: This is what was being used before but it is wrong
    registerTest(specText, testFun, "itCannotAppearInsideAnotherIt", "FlatSpec.scala", methodName, 1, None, None, testTags: _*)
  }

  /**
   * Class that supports the registration of a “subject” being specified and tested via the
   * instance referenced from FlatSpec's behavior field.
   *
   * 

   * This field enables syntax such as the following subject registration:
   * 
   *
   * 
   * behavior of "A Stack"
   * ^
   * 
   *
   * 

   * For more information and examples of the use of the behavior field, see the main documentation
   * for trait FlatSpec.
   * 
   */
  protected final class BehaviorWord {

    /**
     * Supports the registration of a “subject” being specified and tested via the
     * instance referenced from FlatSpec's behavior field.
     *
     * 

     * This method enables syntax such as the following subject registration:
     * 
     *
     * 
     * behavior of "A Stack"
     *          ^
     * 
     *
     * 

     * For more information and examples of the use of this method, see the main documentation
     * for trait FlatSpec.
     * 
     */
    def of(description: String) {

      // TODO: This is what was here, but it needs fixing.
      registerFlatBranch(description, "describeCannotAppearInsideAnIt", "FlatSpec.scala", "of", 1)
    }
  }

  /**
   * Supports the registration of a “subject” being specified and tested.
   *
   * 

   * This field enables syntax such as the following subject registration:
   * 
   *
   * 
   * behavior of "A Stack"
   * ^
   * 
   *
   * 

   * For more information and examples of the use of the behavior field, see the main documentation 
   * for this trait.
   * 
   */
  protected val behavior = new BehaviorWord

  /**
   * Class that supports the registration of tagged tests via the ItWord instance
   * referenced from FlatSpec's it field.
   *
   * 

   * This class enables syntax such as the following tagged test registration:
   * 
   *
   * 
   * it should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
   *                                                                      ^
   * 
   *
   * 

   * It also enables syntax such as the following registration of an ignored, tagged test:
   * 
   *
   * 
   * it should "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { ... }
   *                                                                      ^
   * 
   *
   * 

   * In addition, it enables syntax such as the following registration of a pending, tagged test:
   * 
   *
   * 
   * it should "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
   *                                                                      ^
   * 
   *
   * 

   * For more information and examples of the use of the it field to register tagged tests, see
   * the Tagging tests section in the main documentation for trait FlatSpec.
   * For examples of tagged test registration, see
   * the Tagging tests section in the main documentation for trait FlatSpec.
   * 
   */
  protected final class ItVerbStringTaggedAs(verb: String, name: String, tags: List[Tag]) {

    /**
     * Supports the registration of tagged tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * it must "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
     *                                                                    ^
     * 
     *
     * 

     * For examples of tagged test registration, see
     * the Tagging tests section in the main documentation for trait FlatSpec.
     * 
     */
    def in(testFun: => Unit) {
      registerTestToRun(verb + " " + name, tags, "in", testFun _)
    }

    /**
     * Supports the registration of pending, tagged tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * it must "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
     *                                                                    ^
     * 
     *
     * 

     * For examples of pending test registration, see the Pending tests section in the main documentation
     * for trait FlatSpec.  And for examples of tagged test registration, see
     * the Tagging tests section in the main documentation for trait FlatSpec.
     * 
     */
    def is(testFun: => PendingNothing) {
      registerTestToRun(verb + " " + name, tags, "is", testFun _)
    }

    /**
     * Supports the registration of ignored, tagged tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * it must "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { ... }
     *                                                                    ^
     * 
     *
     * 

     * For examples of ignored test registration, see the Ignored tests section in the main documentation
     * for trait FlatSpec.  And for examples of tagged test registration, see
     * the Tagging tests section in the main documentation for trait FlatSpec.
     * 
     */
    def ignore(testFun: => Unit) {
      registerTestToIgnore(verb + " " + name, tags, "ignore", testFun _)
    }
  }

  /**
   * Class that supports test registration via the ItWord instance referenced from FlatSpec's it field.
   *
   * 

   * This class enables syntax such as the following test registration:
   * 
   *
   * 
   * it should "pop values in last-in-first-out order" in { ... }
   *                                                   ^
   * 
   *
   * 

   * It also enables syntax such as the following registration of an ignored test:
   * 
   *
   * 
   * it should "pop values in last-in-first-out order" ignore { ... }
   *                                                   ^
   * 
   *
   * 

   * In addition, it enables syntax such as the following registration of a pending test:
   * 
   *
   * 
   * it should "pop values in last-in-first-out order" is (pending)
   *                                                   ^
   * 
   *
   * 

   * And finally, it also enables syntax such as the following tagged test registration:
   * 
   *
   * 
   * it should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
   *                                                   ^
   * 
   *
   * 

   * For more information and examples of the use of the it field, see the main documentation
   * for trait FlatSpec.
   * 
   */
  protected final class ItVerbString(verb: String, name: String) {

    /**
     * Supports the registration of tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * it must "pop values in last-in-first-out order" in { ... }
     *                                                 ^
     * 
     *
     * 

     * For examples of test registration, see the main documentation
     * for trait FlatSpec.
     * 
     */
    def in(testFun: => Unit) {
      registerTestToRun(verb + " " + name, List(), "in", testFun _)
    }

    /**
     * Supports the registration of pending tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * it must "pop values in last-in-first-out order" is (pending)
     *                                                 ^
     * 
     *
     * 

     * For examples of pending test registration, see the Pending tests section in the main documentation
     * for trait FlatSpec.
     * 
     */
    def is(testFun: => PendingNothing) {
      registerTestToRun(verb + " " + name, List(), "is", testFun _)
    }

    /**
     * Supports the registration of ignored tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * it must "pop values in last-in-first-out order" ignore { ... }
     *                                                 ^
     * 
     *
     * 

     * For examples of ignored test registration, see the Ignored tests section in the main documentation
     * for trait FlatSpec.
     * 
     */
    def ignore(testFun: => Unit) {
      registerTestToIgnore(verb + " " + name, List(), "ignore", testFun _)
    }

    /**
     * Supports the registration of tagged tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * it must "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
     *                                                 ^
     * 
     *
     * 

     * For examples of tagged test registration, see the Tagging tests section in the main documentation
     * for trait FlatSpec.
     * 
     */
    def taggedAs(firstTestTag: Tag, otherTestTags: Tag*) = {
      val tagList = firstTestTag :: otherTestTags.toList
      new ItVerbStringTaggedAs(verb, name, tagList)
    }
  }

  /**
   * Class that supports test (and shared test) registration via the instance referenced from FlatSpec's it field.
   *
   * 

   * This class enables syntax such as the following test registration:
   * 
   *
   * 
   * it should "pop values in last-in-first-out order" in { ... }
   * ^
   * 
   *
   * 

   * It also enables syntax such as the following shared test registration:
   * 
   *
   * 
   * it should behave like nonEmptyStack(lastItemPushed)
   * ^
   * 
   *
   * 

   * For more information and examples of the use of the it field, see the main documentation 
   * for this trait.
   * 
   */
  protected final class ItWord {

    /**
     * Supports the registration of tests with should in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * it should "pop values in last-in-first-out order" in { ... }
     *    ^
     * 
     *
     * 

     * For examples of test registration, see the main documentation
     * for trait FlatSpec.
     * 
     */
    def should(string: String) = new ItVerbString("should", string)

    /**
     * Supports the registration of tests with must in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * it must "pop values in last-in-first-out order" in { ... }
     *    ^
     * 
     *
     * 

     * For examples of test registration, see the main documentation
     * for trait FlatSpec.
     * 
     */
    def must(string: String) = new ItVerbString("must", string)

    /**
     * Supports the registration of tests with can in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * it can "pop values in last-in-first-out order" in { ... }
     *    ^
     * 
     *
     * 

     * For examples of test registration, see the main documentation
     * for trait FlatSpec.
     * 
     */
    def can(string: String) = new ItVerbString("can", string)

    /**
     * Supports the registration of shared tests with should in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * it should behave like nonFullStack(stackWithOneItem)
     *    ^
     * 
     *
     * 

     * For examples of shared tests, see the Shared tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def should(behaveWord: BehaveWord) = behaveWord

    /**
     * Supports the registration of shared tests with must in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * it must behave like nonFullStack(stackWithOneItem)
     *    ^
     * 
     *
     * 

     * For examples of shared tests, see the Shared tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def must(behaveWord: BehaveWord) = behaveWord

    /**
     * Supports the registration of shared tests with can in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * it can behave like nonFullStack(stackWithOneItem)
     *    ^
     * 
     *
     * 

     * For examples of shared tests, see the Shared tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def can(behaveWord: BehaveWord) = behaveWord
  }

  /**
   * Supports test (and shared test) registration in FlatSpecs.
   *
   * 

   * This field enables syntax such as the following test registration:
   * 
   *
   * 
   * it should "pop values in last-in-first-out order" in { ... }
   * ^
   * 
   *
   * 

   * It also enables syntax such as the following shared test registration:
   * 
   *
   * 
   * it should behave like nonEmptyStack(lastItemPushed)
   * ^
   * 
   *
   * 

   * For more information and examples of the use of the it field, see the main documentation 
   * for this trait.
   * 
   */
  protected val it = new ItWord

  /**
   * Class that supports registration of ignored, tagged tests via the IgnoreWord instance referenced
   * from FlatSpec's ignore field.
   *
   * 

   * This class enables syntax such as the following registration of an ignored, tagged test:
   * 
   *
   * 
   * ignore should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
   *                                                                          ^
   * 
   *
   * 

   * In addition, it enables syntax such as the following registration of an ignored, tagged, pending test:
   * 
   *
   * 
   * ignore should "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
   *                                                                          ^
   * 
   *
   * 

   * Note: the is method is provided for completeness and design symmetry, given there's no way
   * to prevent changing is to ignore and marking a pending test as ignored that way.
   * Although it isn't clear why someone would want to mark a pending test as ignored, it can be done.
   * 
   *
   * 

   * For more information and examples of the use of the ignore field, see the Ignored tests section
   * in the main documentation for trait FlatSpec. For examples of tagged test registration, see
   * the Tagging tests section in the main documentation for trait FlatSpec.
   * 
   */
  protected final class IgnoreVerbStringTaggedAs(verb: String, name: String, tags: List[Tag]) {

    /**
     * Supports the registration of ignored, tagged tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * ignore must "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
     *                                                                        ^
     * 
     *
     * 

     * For examples of the registration of ignored tests, see the Ignored tests section
     * in the main documentation for trait FlatSpec. For examples of tagged test registration, see
     * the Tagging tests section in the main documentation for trait FlatSpec.
     * 
     */
    def in(testFun: => Unit) {
      registerTestToIgnore(verb + " " + name, tags, "in", testFun _)
    }

    /**
     * Supports the registration of ignored, tagged, pending tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * ignore must "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
     *                                                                        ^
     * 
     *
     * 

     * Note: this is method is provided for completeness and design symmetry, given there's no way
     * to prevent changing is to ignore and marking a pending test as ignored that way.
     * Although it isn't clear why someone would want to mark a pending test as ignored, it can be done.
     * 
     *
     * 

     * For examples of pending test registration, see the Pending tests section in the main documentation
     * for trait FlatSpec.  For examples of the registration of ignored tests,
     * see the Ignored tests section
     * in the main documentation for trait FlatSpec. For examples of tagged test registration, see
     * the Tagging tests section in the main documentation for trait FlatSpec.
     * 
     */
    def is(testFun: => PendingNothing) {
      registerTestToIgnore(verb + " " + name, tags, "is", testFun _)
    }
    // Note: no def ignore here, so you can't put two ignores in the same line
  }

  /**
   * Class that supports registration of ignored tests via the IgnoreWord instance referenced
   * from FlatSpec's ignore field.
   *
   * 

   * This class enables syntax such as the following registration of an ignored test:
   * 
   *
   * 
   * ignore should "pop values in last-in-first-out order" in { ... }
   *                                                       ^
   * 
   *
   * 

   * In addition, it enables syntax such as the following registration of an ignored, pending test:
   * 
   *
   * 
   * ignore should "pop values in last-in-first-out order" is (pending)
   *                                                       ^
   * 
   *
   * 

   * Note: the is method is provided for completeness and design symmetry, given there's no way
   * to prevent changing is to ignore and marking a pending test as ignored that way.
   * Although it isn't clear why someone would want to mark a pending test as ignored, it can be done.
   * 
   *
   * 

   * And finally, it also enables syntax such as the following ignored, tagged test registration:
   * 
   *
   * 
   * ignore should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
   *                                                       ^
   * 
   *
   * 

   * For more information and examples of the use of the ignore field, see the Ignored tests section
   * in the main documentation for trait FlatSpec.
   * 
   */
  protected final class IgnoreVerbString(verb: String, name: String) {

    /**
     * Supports the registration of ignored tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * ignore must "pop values in last-in-first-out order" in { ... }
     *                                                     ^
     * 
     *
     * 

     * For examples of the registration of ignored tests, see the Ignored tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def in(testFun: => Unit) {
      registerTestToIgnore(verb + " " + name, List(), "in", testFun _)
    }

    /**
     * Supports the registration of ignored, pending tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * ignore must "pop values in last-in-first-out order" is (pending)
     *                                                     ^
     * 
     *
     * 

     * Note: this is method is provided for completeness and design symmetry, given there's no way
     * to prevent changing is to ignore and marking a pending test as ignored that way.
     * Although it isn't clear why someone would want to mark a pending test as ignored, it can be done.
     * 
     *
     * 

     * For examples of pending test registration, see the Pending tests section in the main documentation
     * for trait FlatSpec.  For examples of the registration of ignored tests,
     * see the Ignored tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def is(testFun: => PendingNothing) {
      registerTestToIgnore(verb + " " + name, List(), "is", testFun _)
    }

    /**
     * Supports the registration of ignored, tagged tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * ignore must "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
     *                                                     ^
     * 
     *
     * 

     * For examples of tagged test registration, see the Tagging tests section in the main documentation
     * for trait FlatSpec.  For examples of the registration of ignored tests,
     * see the Ignored tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def taggedAs(firstTestTag: Tag, otherTestTags: Tag*) = {
      val tagList = firstTestTag :: otherTestTags.toList
      new IgnoreVerbStringTaggedAs(verb, name, tagList)
    }
  }

  /**
   * Class that supports registration of ignored tests via the ItWord instance
   * referenced from FlatSpec's ignore field.
   *
   * 

   * This class enables syntax such as the following registration of an ignored test:
   * 
   *
   * 
   * ignore should "pop values in last-in-first-out order" in { ... }
   * ^
   * 
   *
   * 

   * For more information and examples of the use of the ignore field, see Ignored tests section
   * in the main documentation for this trait.
   * 
   */
  protected final class IgnoreWord {

    /**
     * Supports the registration of ignored tests with should in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * ignore should "pop values in last-in-first-out order" in { ... }
     *        ^
     * 
     *
     * 

     * For more information and examples of the use of the ignore field, see Ignored tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def should(string: String) = new IgnoreVerbString("should", string)

    /**
     * Supports the registration of ignored tests with must in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * ignore must "pop values in last-in-first-out order" in { ... }
     *        ^
     * 
     *
     * 

     * For more information and examples of the use of the ignore field, see Ignored tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def must(string: String) = new IgnoreVerbString("must", string)

    /**
     * Supports the registration of ignored tests with can in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * ignore can "pop values in last-in-first-out order" in { ... }
     *        ^
     * 
     *
     * 

     * For more information and examples of the use of the ignore field, see Ignored tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def can(string: String) = new IgnoreVerbString("can", string)
  }

  /**
   * Supports registration of ignored tests in FlatSpecs.
   *
   * 

   * This field enables syntax such as the following registration of an ignored test:
   * 
   *
   * 
   * ignore should "pop values in last-in-first-out order" in { ... }
   * ^
   * 
   *
   * 

   * For more information and examples of the use of the ignore field, see the Ignored tests section
   * in the main documentation for this trait.
   * 
   */
  protected val ignore = new IgnoreWord
  
  /**
   * Class that supports the registration of tagged tests via the TheyWord instance
   * referenced from FlatSpec's they field.
   *
   * 

   * This class enables syntax such as the following tagged test registration:
   * 
   *
   * 
   * they should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
   *                                                                        ^
   * 
   *
   * 

   * It also enables syntax such as the following registration of an ignored, tagged test:
   * 
   *
   * 
   * they should "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { ... }
   *                                                                        ^
   * 
   *
   * 

   * In addition, it enables syntax such as the following registration of a pending, tagged test:
   * 
   *
   * 
   * they should "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
   *                                                                        ^
   * 
   *
   * 

   * For more information and examples of the use of the they field to register tagged tests, see
   * the Tagging tests section in the main documentation for trait FlatSpec.
   * For examples of tagged test registration, see
   * the Tagging tests section in the main documentation for trait FlatSpec.
   * 
   */
  protected final class TheyVerbStringTaggedAs(verb: String, name: String, tags: List[Tag]) {

    /**
     * Supports the registration of tagged tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * they must "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
     *                                                                      ^
     * 
     *
     * 

     * For examples of tagged test registration, see
     * the Tagging tests section in the main documentation for trait FlatSpec.
     * 
     */
    def in(testFun: => Unit) {
      registerTestToRun(verb + " " + name, tags, "in", testFun _)
    }

    /**
     * Supports the registration of pending, tagged tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * they must "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
     *                                                                      ^
     * 
     *
     * 

     * For examples of pending test registration, see the Pending tests section in the main documentation
     * for trait FlatSpec.  And for examples of tagged test registration, see
     * the Tagging tests section in the main documentation for trait FlatSpec.
     * 
     */
    def is(testFun: => PendingNothing) {
      registerTestToRun(verb + " " + name, tags, "is", testFun _)
    }

    /**
     * Supports the registration of ignored, tagged tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * they must "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { ... }
     *                                                                      ^
     * 
     *
     * 

     * For examples of ignored test registration, see the Ignored tests section in the main documentation
     * for trait FlatSpec.  And for examples of tagged test registration, see
     * the Tagging tests section in the main documentation for trait FlatSpec.
     * 
     */
    def ignore(testFun: => Unit) {
      registerTestToIgnore(verb + " " + name, tags, "ignore", testFun _)
    }
  }

  /**
   * Class that supports test registration via the TheyWord instance referenced from FlatSpec's they field.
   *
   * 

   * This class enables syntax such as the following test registration:
   * 
   *
   * 
   * they should "pop values in last-in-first-out order" in { ... }
   *                                                     ^
   * 
   *
   * 

   * It also enables syntax such as the following registration of an ignored test:
   * 
   *
   * 
   * they should "pop values in last-in-first-out order" ignore { ... }
   *                                                     ^
   * 
   *
   * 

   * In addition, it enables syntax such as the following registration of a pending test:
   * 
   *
   * 
   * they should "pop values in last-in-first-out order" is (pending)
   *                                                     ^
   * 
   *
   * 

   * And finally, it also enables syntax such as the following tagged test registration:
   * 
   *
   * 
   * they should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
   *                                                     ^
   * 
   *
   * 

   * For more information and examples of the use of the it field, see the main documentation
   * for trait FlatSpec.
   * 
   */
  protected final class TheyVerbString(verb: String, name: String) {

    /**
     * Supports the registration of tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * they must "pop values in last-in-first-out order" in { ... }
     *                                                   ^
     * 
     *
     * 

     * For examples of test registration, see the main documentation
     * for trait FlatSpec.
     * 
     */
    def in(testFun: => Unit) {
      registerTestToRun(verb + " " + name, List(), "in", testFun _)
    }

    /**
     * Supports the registration of pending tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * they must "pop values in last-in-first-out order" is (pending)
     *                                                   ^
     * 
     *
     * 

     * For examples of pending test registration, see the Pending tests section in the main documentation
     * for trait FlatSpec.
     * 
     */
    def is(testFun: => PendingNothing) {
      registerTestToRun(verb + " " + name, List(), "is", testFun _)
    }

    /**
     * Supports the registration of ignored tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * they must "pop values in last-in-first-out order" ignore { ... }
     *                                                   ^
     * 
     *
     * 

     * For examples of ignored test registration, see the Ignored tests section in the main documentation
     * for trait FlatSpec.
     * 
     */
    def ignore(testFun: => Unit) {
      registerTestToIgnore(verb + " " + name, List(), "ignore", testFun _)
    }

    /**
     * Supports the registration of tagged tests in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * they must "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
     *                                                   ^
     * 
     *
     * 

     * For examples of tagged test registration, see the Tagging tests section in the main documentation
     * for trait FlatSpec.
     * 
     */
    def taggedAs(firstTestTag: Tag, otherTestTags: Tag*) = {
      val tagList = firstTestTag :: otherTestTags.toList
      new ItVerbStringTaggedAs(verb, name, tagList)
    }
  }

  /**
   * Class that supports test (and shared test) registration via the instance referenced from FlatSpec's it field.
   *
   * 

   * This class enables syntax such as the following test registration:
   * 
   *
   * 
   * they should "pop values in last-in-first-out order" in { ... }
   * ^
   * 
   *
   * 

   * It also enables syntax such as the following shared test registration:
   * 
   *
   * 
   * they should behave like nonEmptyStack(lastItemPushed)
   * ^
   * 
   *
   * 

   * For more information and examples of the use of the it field, see the main documentation 
   * for this trait.
   * 
   */
  protected final class TheyWord {

    /**
     * Supports the registration of tests with should in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * they should "pop values in last-in-first-out order" in { ... }
     *      ^
     * 
     *
     * 

     * For examples of test registration, see the main documentation
     * for trait FlatSpec.
     * 
     */
    def should(string: String) = new ItVerbString("should", string)

    /**
     * Supports the registration of tests with must in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * they must "pop values in last-in-first-out order" in { ... }
     *      ^
     * 
     *
     * 

     * For examples of test registration, see the main documentation
     * for trait FlatSpec.
     * 
     */
    def must(string: String) = new ItVerbString("must", string)

    /**
     * Supports the registration of tests with can in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * they can "pop values in last-in-first-out order" in { ... }
     *      ^
     * 
     *
     * 

     * For examples of test registration, see the main documentation
     * for trait FlatSpec.
     * 
     */
    def can(string: String) = new ItVerbString("can", string)

    /**
     * Supports the registration of shared tests with should in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * they should behave like nonFullStack(stackWithOneItem)
     *      ^
     * 
     *
     * 

     * For examples of shared tests, see the Shared tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def should(behaveWord: BehaveWord) = behaveWord

    /**
     * Supports the registration of shared tests with must in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * they must behave like nonFullStack(stackWithOneItem)
     *      ^
     * 
     *
     * 

     * For examples of shared tests, see the Shared tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def must(behaveWord: BehaveWord) = behaveWord

    /**
     * Supports the registration of shared tests with can in a FlatSpec.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * they can behave like nonFullStack(stackWithOneItem)
     *      ^
     * 
     *
     * 

     * For examples of shared tests, see the Shared tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def can(behaveWord: BehaveWord) = behaveWord
  }

  /**
   * Supports test (and shared test) registration in FlatSpecs.
   *
   * 

   * This field enables syntax such as the following test registration:
   * 
   *
   * 
   * they should "pop values in last-in-first-out order" in { ... }
   * ^
   * 
   *
   * 

   * It also enables syntax such as the following shared test registration:
   * 
   *
   * 
   * they should behave like nonEmptyStack(lastItemPushed)
   * ^
   * 
   *
   * 

   * For more information and examples of the use of the it field, see the main documentation 
   * for this trait.
   * 
   */
  protected val they = new TheyWord

  /**
   * Class that supports test registration in shorthand form.
   *
   * 

   * For example, this class enables syntax such as the following test registration
   * in shorthand form:
   * 
   *
   * 
   * "A Stack (when empty)" should "be empty" in { ... }
   *                                          ^
   * 
   *
   * 

   * This class also enables syntax such as the following ignored test registration
   * in shorthand form:
   * 
   *
   * 
   * "A Stack (when empty)" should "be empty" ignore { ... }
   *                                          ^
   * 
   *
   * 

   * This class is used via an implicit conversion (named convertToInAndIgnoreMethods)
   * from ResultOfStringPassedToVerb. The ResultOfStringPassedToVerb class
   * does not declare any methods named in, because the
   * type passed to in differs in a FlatSpec and a fixture.FlatSpec.
   * A fixture.FlatSpec needs two in methods, one that takes a no-arg
   * test function and another that takes a one-arg test function (a test that takes a
   * Fixture as its parameter). By constrast, a FlatSpec needs
   * only one in method that takes a by-name parameter. As a result,
   * FlatSpec and fixture.FlatSpec each provide an implicit conversion
   * from ResultOfStringPassedToVerb to a type that provides the appropriate
   * in methods.
   * 
   *
   * @author Bill Venners
   */
  protected final class InAndIgnoreMethods(resultOfStringPassedToVerb: ResultOfStringPassedToVerb) {

    import resultOfStringPassedToVerb.verb
    import resultOfStringPassedToVerb.rest

    /**
     * Supports the registration of tests in shorthand form.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * "A Stack" must "pop values in last-in-first-out order" in { ... }
     *                                                        ^
     * 
     *
     * 

     * For examples of test registration, see the main documentation
     * for trait FlatSpec.
     * 
     */
    def in(testFun: => Unit) {
      registerTestToRun(verb + " " + rest, List(), "in", testFun _)
    }
    
    /**
     * Supports the registration of ignored tests in shorthand form.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * "A Stack" must "pop values in last-in-first-out order" ignore { ... }
     *                                                        ^
     * 
     *
     * 

     * For examples of ignored test registration, see the Ignored tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def ignore(testFun: => Unit) {
      registerTestToIgnore(verb + " " + rest, List(), "ignore", testFun _)
    }
  }

  /**
   * Implicitly converts an object of type ResultOfStringPassedToVerb to an
   * InAndIgnoreMethods, to enable in and ignore
   * methods to be invokable on that object.
   */
  protected implicit def convertToInAndIgnoreMethods(resultOfStringPassedToVerb: ResultOfStringPassedToVerb) =
    new InAndIgnoreMethods(resultOfStringPassedToVerb)
  
  /**
   * Class that supports tagged test registration in shorthand form.
   *
   * 

   * For example, this class enables syntax such as the following tagged test registration
   * in shorthand form:
   * 
   *
   * 
   * "A Stack (when empty)" should "be empty" taggedAs() in { ... }
   *                                                     ^
   * 
   *
   * 

   * This class also enables syntax such as the following tagged, ignored test registration
   * in shorthand form:
   * 
   *
   * 
   * "A Stack (when empty)" should "be empty" taggedAs(SlowTest) ignore { ... }
   *                                                             ^
   * 
   *
   * 

   * This class is used via an implicit conversion (named convertToInAndIgnoreMethodsAfterTaggedAs)
   * from ResultOfTaggedAsInvocation. The ResultOfTaggedAsInvocation class
   * does not declare any methods named in, because the
   * type passed to in differs in a FlatSpec and a fixture.FlatSpec.
   * A fixture.FlatSpec needs two in methods, one that takes a no-arg
   * test function and another that takes a one-arg test function (a test that takes a
   * Fixture as its parameter). By constrast, a FlatSpec needs
   * only one in method that takes a by-name parameter. As a result,
   * FlatSpec and fixture.FlatSpec each provide an implicit conversion
   * from ResultOfTaggedAsInvocation to a type that provides the appropriate
   * in methods.
   * 
   *
   * @author Bill Venners
   */
  protected final class InAndIgnoreMethodsAfterTaggedAs(resultOfTaggedAsInvocation: ResultOfTaggedAsInvocation) {

    import resultOfTaggedAsInvocation.verb
    import resultOfTaggedAsInvocation.rest
    import resultOfTaggedAsInvocation.{tags => tagsList}

    /**
     * Supports the registration of tagged tests in shorthand form.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * "A Stack" must "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
     *                                                                           ^
     * 
     *
     * 

     * For examples of tagged test registration, see the Tagging tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def in(testFun: => Unit) {
      registerTestToRun(verb + " " + rest, tagsList, "in", testFun _)
    }

    /**
     * Supports the registration of tagged, ignored tests in shorthand form.
     *
     * 

     * This method supports syntax such as the following:
     * 
     *
     * 
     * "A Stack" must "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { ... }
     *                                                                           ^
     * 
     *
     * 

     * For examples of ignored test registration, see the Ignored tests section
     * in the main documentation for trait FlatSpec.
     * For examples of tagged test registration, see the Tagging tests section
     * in the main documentation for trait FlatSpec.
     * 
     */
    def ignore(testFun: => Unit) {
      registerTestToIgnore(verb + " " + rest, tagsList, "ignore", testFun _)
    }
  }

  /**
   * Implicitly converts an object of type ResultOfTaggedAsInvocation to an
   * InAndIgnoreMethodsAfterTaggedAs, to enable in and ignore
   * methods to be invokable on that object.
   */
  protected implicit def convertToInAndIgnoreMethodsAfterTaggedAs(resultOfTaggedAsInvocation: ResultOfTaggedAsInvocation) =
    new InAndIgnoreMethodsAfterTaggedAs(resultOfTaggedAsInvocation)

  /**
   * Supports the shorthand form of test registration.
   *
   * 

   * For example, this method enables syntax such as the following:
   * 
   *
   * 
   * "A Stack (when empty)" should "be empty" in { ... }
   *                        ^
   * 
   *
   * 

   * This function is passed as an implicit parameter to a should method
   * provided in ShouldVerb, a must method
   * provided in MustVerb, and a can method
   * provided in CanVerb. When invoked, this function registers the
   * subject description (the first parameter to the function) and returns a ResultOfStringPassedToVerb
   * initialized with the verb and rest parameters (the second and third parameters to
   * the function, respectively).
   * 
   */
  protected implicit val shorthandTestRegistrationFunction: (String, String, String) => ResultOfStringPassedToVerb = {
    (subject, verb, rest) => {
      behavior.of(subject)
      new ResultOfStringPassedToVerb(verb, rest) {

        def is(testFun: => PendingNothing) {
          registerTestToRun(verb + " " + rest, List(), "is", testFun _)
        }
        // Note, won't have an is method that takes fixture => PendingNothing one, because don't want
        // to say is (fixture => pending), rather just say is (pending)
        def taggedAs(firstTestTag: Tag, otherTestTags: Tag*) = {
          val tagList = firstTestTag :: otherTestTags.toList
          new ResultOfTaggedAsInvocation(verb, rest, tagList) {
            // "A Stack" should "bla bla" taggedAs(SlowTest) is (pending)
            //                                               ^
            def is(testFun: => PendingNothing) {
              registerTestToRun(verb + " " + rest, tags, "is", testFun _)
            }
          }
        }
      }
    }
  }

  /**
   * Supports the shorthand form of shared test registration.
   *
   * 

   * For example, this method enables syntax such as the following in:
   * 
   *
   * 
   * "A Stack (with one item)" should behave like nonEmptyStack(stackWithOneItem, lastValuePushed)
   *                           ^
   * 
   *
   * 

   * This function is passed as an implicit parameter to a should method
   * provided in ShouldVerb, a must method
   * provided in MustVerb, and a can method
   * provided in CanVerb. When invoked, this function registers the
   * subject description (the  parameter to the function) and returns a BehaveWord.
   * 
   */
  protected implicit val shorthandSharedTestRegistrationFunction: (String) => BehaveWord = {
    (left) => {
      behavior.of(left)
      new BehaveWord
    }
  }

  /**
   * Register a test to ignore, which has the given spec text, optional tags, and test function value that takes no arguments.
   * This method will register the test for later ignoring via an invocation of one of the execute
   * methods. This method exists to make it easy to ignore an existing test by changing the call to it
   * to ignore without deleting or commenting out the actual test code. The test will not be executed, but a
   * report will be sent that indicates the test was ignored. The name of the test will be a concatenation of the text of all surrounding describers,
   * from outside in, and the passed spec text, with one space placed between each item. (See the documenation
   * for testNames for an example.) The resulting test name must not have been registered previously on
   * this FlatSpec instance.
   *
   * @param specText the specification text, which will be combined with the descText of any surrounding describers
   * to form the test name
   * @param testTags the optional list of tags for this test
   * @param methodName caller's method name
   * @param testFun the test function
   * @throws DuplicateTestNameException if a test with the same name has been registered previously
   * @throws TestRegistrationClosedException if invoked after run has been invoked on this suite
   * @throws NullPointerException if specText or any passed test tag is null
   */
  private def registerTestToIgnore(specText: String, testTags: List[Tag], methodName: String, testFun: () => Unit) {

    // TODO: This is how these were, but it needs attention. Mentions "it".
    registerIgnoredTest(specText, testFun, "ignoreCannotAppearInsideAnIt", "FlatSpec.scala", methodName, 1, testTags: _*)
  }

  /**
   * A Map whose keys are String tag names to which tests in this FlatSpec belong, and values
   * the Set of test names that belong to each tag. If this FlatSpec contains no tags, this method returns an empty Map.
   *
   * 

   * This trait's implementation returns tags that were passed as strings contained in Tag objects passed to 
   * methods test and ignore. 
   * 
   */
  override def tags: Map[String, Set[String]] = atomic.get.tagsMap

  /**
   * Run a test. This trait's implementation runs the test registered with the name specified by
   * testName. Each test's name is a concatenation of the text of all describers surrounding a test,
   * from outside in, and the test's  spec text, with one space placed between each item. (See the documenation
   * for testNames for an example.)
   *
   * @param testName the name of one test to execute.
   * @param reporter the Reporter to which results will be reported
   * @param stopper the Stopper that will be consulted to determine whether to stop execution early.
   * @param configMap a Map of properties that can be used by this FlatSpec's executing tests.
   * @throws NullPointerException if any of testName, reporter, stopper, or configMap
   *     is null.
   */
  protected override def runTest(testName: String, reporter: Reporter, stopper: Stopper, configMap: Map[String, Any], tracker: Tracker) {

    def invokeWithFixture(theTest: TestLeaf) {
      val theConfigMap = configMap
      withFixture(
        new NoArgTest {
          def name = testName
          def apply() { theTest.testFun() }
          def configMap = theConfigMap
        }
      )
    }

    runTestImpl(thisSuite, testName, reporter, stopper, configMap, tracker, true, invokeWithFixture)
  }

  /**
   * Run zero to many of this FlatSpec's tests.
   *
   * 

   * This method takes a testName parameter that optionally specifies a test to invoke.
   * If testName is Some, this trait's implementation of this method
   * invokes runTest on this object, passing in:
   * 
   *
   * 

   * 
testName - the String value of the testName Option passed
   *   to this method
   * 
reporter - the Reporter passed to this method, or one that wraps and delegates to it
   * 
stopper - the Stopper passed to this method, or one that wraps and delegates to it
   * 
configMap - the configMap passed to this method, or one that wraps and delegates to it
   * 
   *
   * 

   * This method takes a Set of tag names that should be included (tagsToInclude), and a Set
   * that should be excluded (tagsToExclude), when deciding which of this Suite's tests to execute.
   * If tagsToInclude is empty, all tests will be executed
   * except those those belonging to tags listed in the tagsToExclude Set. If tagsToInclude is non-empty, only tests
   * belonging to tags mentioned in tagsToInclude, and not mentioned in tagsToExclude
   * will be executed. However, if testName is Some, tagsToInclude and tagsToExclude are essentially ignored.
   * Only if testName is None will tagsToInclude and tagsToExclude be consulted to
   * determine which of the tests named in the testNames Set should be run. For more information on trait tags, see the main documentation for this trait.
   * 
   *
   * 

   * If testName is None, this trait's implementation of this method
   * invokes testNames on this Suite to get a Set of names of tests to potentially execute.
   * (A testNames value of None essentially acts as a wildcard that means all tests in
   * this Suite that are selected by tagsToInclude and tagsToExclude should be executed.)
   * For each test in the testName Set, in the order
   * they appear in the iterator obtained by invoking the elements method on the Set, this trait's implementation
   * of this method checks whether the test should be run based on the tagsToInclude and tagsToExclude Sets.
   * If so, this implementation invokes runTest, passing in:
   * 
   *
   * 

   * 
testName - the String name of the test to run (which will be one of the names in the testNames Set)
   * 
reporter - the Reporter passed to this method, or one that wraps and delegates to it
   * 
stopper - the Stopper passed to this method, or one that wraps and delegates to it
   * 
configMap - the configMap passed to this method, or one that wraps and delegates to it
   * 
   *
   * @param testName an optional name of one test to execute. If None, all relevant tests should be executed.
   *                 I.e., None acts like a wildcard that means execute all relevant tests in this FlatSpec.
   * @param reporter the Reporter to which results will be reported
   * @param stopper the Stopper that will be consulted to determine whether to stop execution early.
   * @param tagsToInclude a Set of String tag names to include in the execution of this FlatSpec
   * @param tagsToExclude a Set of String tag names to exclude in the execution of this FlatSpec
   * @param configMap a Map of key-value pairs that can be used by this FlatSpec's executing tests.
   * @throws NullPointerException if any of testName, reporter, stopper, tagsToInclude,
   *     tagsToExclude, or configMap is null.
   */
  protected override def runTests(testName: Option[String], reporter: Reporter, stopper: Stopper, filter: Filter,
      configMap: Map[String, Any], distributor: Option[Distributor], tracker: Tracker) {
    
    runTestsImpl(thisSuite, testName, reporter, stopper, filter, configMap, distributor, tracker, info, true, runTest)
  }

  /**
   * An immutable Set of test names. If this FlatSpec contains no tests, this method returns an
   * empty Set.
   *
   * 

   * This trait's implementation of this method will return a set that contains the names of all registered tests. The set's
   * iterator will return those names in the order in which the tests were registered. Each test's name is composed
   * of the concatenation of the text of each surrounding describer, in order from outside in, and the text of the
   * example itself, with all components separated by a space. For example, consider this FlatSpec:
   * 
   *
   * 
   * import org.scalatest.FlatSpec
   *
   * class StackSpec extends FlatSpec {
   *
   *   "A Stack (when not empty)" must "allow me to pop" in {}
   *   it must "not be empty" in {}
   *
   *   "A Stack (when not full)" must "allow me to push" in {}
   *   it must "not be full" in {}
   * }
   * 
   *
   * 

   * Invoking testNames on this FlatSpec will yield a set that contains the following
   * two test name strings:
   * 
   *
   * 
   * "A Stack (when not empty) must allow me to pop"
   * "A Stack (when not empty) must not be empty"
   * "A Stack (when not full) must allow me to push"
   * "A Stack (when not full) must not be full"
   * 
   */
  override def testNames: Set[String] = {
    // I'm returning a ListSet here so that they tests will be run in registration order
    ListSet(atomic.get.testNamesList.toArray: _*)
  }

  override def run(testName: Option[String], reporter: Reporter, stopper: Stopper, filter: Filter,
      configMap: Map[String, Any], distributor: Option[Distributor], tracker: Tracker) {

    runImpl(thisSuite, testName, reporter, stopper, filter, configMap, distributor, tracker, super.run)
  }

  /**
   * Supports shared test registration in FlatSpecs.
   *
   * 

   * This field supports syntax such as the following:
   * 
   *
   * 
   * it should behave like nonFullStack(stackWithOneItem)
   *           ^
   * 
   *
   * 

   * For more information and examples of the use of behave, see the Shared tests section
   * in the main documentation for this trait.
   * 
   */
  protected val behave = new BehaveWord
  
  /**
   * Suite style name.
   */
  final override val styleName: String = "org.scalatest.FlatSpec"
}