org.scalatest.fixture.FlatSpec.scala Maven / Gradle / Ivy
Show all versions of scalatest_2.9.3 Show documentation
/*
* Copyright 2001-2009 Artima, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.scalatest.fixture
import org.scalatest._
import FixtureNodeFamily._
import verb.{ResultOfTaggedAsInvocation, ResultOfStringPassedToVerb, BehaveWord, ShouldVerb, MustVerb, CanVerb}
import scala.collection.immutable.ListSet
import org.scalatest.exceptions.StackDepthExceptionHelper.getStackDepth
import java.util.concurrent.atomic.AtomicReference
import java.util.ConcurrentModificationException
import org.scalatest.events._
import org.scalatest.Suite.anErrorThatShouldCauseAnAbort
import org.scalatest.Suite.autoTagClassAnnotations
/**
* A sister trait to org.scalatest.FlatSpec that can pass a fixture object into its tests.
*
*
* Recommended Usage:
* Use trait fixture.FlatSpec in situations for which FlatSpec
* would be a good choice, when all or most tests need the same fixture objects
* that must be cleaned up afterwords. Note: fixture.FlatSpec is intended for use in special situations, with trait FlatSpec used for general needs. For
* more insight into where fixture.FlatSpec fits in the big picture, see the withFixture(OneArgTest) subsection of the Shared fixtures section in the documentation for trait FlatSpec.
*
*
*
* Trait fixture.FlatSpec behaves similarly to trait org.scalatest.FlatSpec, except that tests may have a
* fixture parameter. The type of the
* fixture parameter is defined by the abstract FixtureParam type, which is declared as a member of this trait.
* This trait also declares an abstract withFixture method. This withFixture method
* takes a OneArgTest, which is a nested trait defined as a member of this trait.
* OneArgTest has an apply method that takes a FixtureParam.
* This apply method is responsible for running a test.
* This trait's runTest method delegates the actual running of each test to withFixture(OneArgTest), passing
* in the test code to run via the OneArgTest argument. The withFixture(OneArgTest) method (abstract in this trait) is responsible
* for creating the fixture argument and passing it to the test function.
*
*
*
* Subclasses of this trait must, therefore, do three things differently from a plain old org.scalatest.FlatSpec:
*
*
*
* - define the type of the fixture parameter by specifying type
FixtureParam
* - define the
withFixture(OneArgTest) method
* - write tests that take a fixture parameter
* - (You can also define tests that don't take a fixture parameter.)
*
*
*
* If the fixture you want to pass into your tests consists of multiple objects, you will need to combine
* them into one object to use this trait. One good approach to passing multiple fixture objects is
* to encapsulate them in a case class. Here's an example:
*
*
*
* case class F(file: File, writer: FileWriter)
* type FixtureParam = F
*
*
*
* To enable the stacking of traits that define withFixture(NoArgTest), it is a good idea to let
* withFixture(NoArgTest) invoke the test function instead of invoking the test
* function directly. To do so, you'll need to convert the OneArgTest to a NoArgTest. You can do that by passing
* the fixture object to the toNoArgTest method of OneArgTest. In other words, instead of
* writing “test(theFixture)”, you'd delegate responsibility for
* invoking the test function to the withFixture(NoArgTest) method of the same instance by writing:
*
*
*
* withFixture(test.toNoArgTest(theFixture))
*
*
*
* Here's a complete example:
*
*
*
* package org.scalatest.examples.flatspec.oneargtest
*
* import org.scalatest.fixture
* import java.io._
*
* class ExampleSpec extends fixture.FlatSpec {
*
* case class F(file: File, writer: FileWriter)
* type FixtureParam = F
*
* def withFixture(test: OneArgTest) {
*
* // create the fixture
* val file = File.createTempFile("hello", "world")
* val writer = new FileWriter(file)
* val theFixture = F(file, writer)
*
* try {
* writer.write("ScalaTest is ") // set up the fixture
* withFixture(test.toNoArgTest(theFixture)) // "loan" the fixture to the test
* }
* finally writer.close() // clean up the fixture
* }
*
* "Testing" should "be easy" in { f =>
* f.writer.write("easy!")
* f.writer.flush()
* assert(f.file.length === 18)
* }
*
* it should "be fun" in { f =>
* f.writer.write("fun!")
* f.writer.flush()
* assert(f.file.length === 17)
* }
* }
*
*
*
* If a test fails, the OneArgTest function will complete abruptly with an exception describing the failure.
* To ensure clean up happens even if a test fails, you should invoke the test function from inside a try block and do the cleanup in a
* finally clause, as shown in the previous example.
*
*
* Sharing fixtures across classes
*
*
* If multiple test classes need the same fixture, you can define the FixtureParam and withFixture(OneArgTest) implementations
* in a trait, then mix that trait into the test classes that need it. For example, if your application requires a database and your integration tests
* use that database, you will likely have many test classes that need a database fixture. You can create a "database fixture" trait that creates a
* database with a unique name, passes the connector into the test, then removes the database once the test completes. This is shown in the following example:
*
*
*
* package org.scalatest.examples.fixture.flatspec.sharing
*
* import java.util.concurrent.ConcurrentHashMap
* import org.scalatest.fixture
* import DbServer._
* import java.util.UUID.randomUUID
*
* object DbServer { // Simulating a database server
* type Db = StringBuffer
* private val databases = new ConcurrentHashMap[String, Db]
* def createDb(name: String): Db = {
* val db = new StringBuffer
* databases.put(name, db)
* db
* }
* def removeDb(name: String) {
* databases.remove(name)
* }
* }
*
* trait DbFixture { this: fixture.Suite =>
*
* type FixtureParam = Db
*
* // Allow clients to populate the database after
* // it is created
* def populateDb(db: Db) {}
*
* def withFixture(test: OneArgTest) {
* val dbName = randomUUID.toString
* val db = createDb(dbName) // create the fixture
* try {
* populateDb(db) // setup the fixture
* withFixture(test.toNoArgTest(db)) // "loan" the fixture to the test
* }
* finally removeDb(dbName) // clean up the fixture
* }
* }
*
* class ExampleSpec extends fixture.FlatSpec with DbFixture {
*
* override def populateDb(db: Db) { // setup the fixture
* db.append("ScalaTest is ")
* }
*
* "Testing" should "be easy" in { db =>
* db.append("easy!")
* assert(db.toString === "ScalaTest is easy!")
* }
*
* it should "be fun" in { db =>
* db.append("fun!")
* assert(db.toString === "ScalaTest is fun!")
* }
*
* // This test doesn't need a Db
* "Test code" should "be clear" in { () =>
* val buf = new StringBuffer
* buf.append("ScalaTest code is ")
* buf.append("clear!")
* assert(buf.toString === "ScalaTest code is clear!")
* }
* }
*
*
*
* Often when you create fixtures in a trait like DbFixture, you'll still need to enable individual test classes
* to "setup" a newly created fixture before it gets passed into the tests. A good way to accomplish this is to pass the newly
* created fixture into a setup method, like populateDb in the previous example, before passing it to the test
* function. Classes that need to perform such setup can override the method, as does ExampleSpec.
*
*
*
* If a test doesn't need the fixture, you can indicate that by providing a no-arg instead of a one-arg function, as is done in the
* third test in the previous example, “Test code should be clear”. In other words, instead of starting your function literal
* with something like “db =>”, you'd start it with “() =>”. For such tests, runTest
* will not invoke withFixture(OneArgTest). It will instead directly invoke withFixture(NoArgTest).
*
*
*
* Both examples shown above demonstrate the technique of giving each test its own "fixture sandbox" to play in. When your fixtures
* involve external side-effects, like creating files or databases, it is a good idea to give each file or database a unique name as is
* done in these examples. This keeps tests completely isolated, allowing you to run them in parallel if desired. You could mix
* ParallelTestExecution into either of these ExampleSpec classes, and the tests would run in parallel just fine.
*
*
* @author Bill Venners
*/
@Finders(Array("org.scalatest.finders.FlatSpecFinder"))
trait FlatSpec extends Suite with ShouldVerb with MustVerb with CanVerb { thisSuite =>
private final val engine = new FixtureEngine[FixtureParam]("concurrentFixtureFlatSpecMod", "FixtureFlatSpec")
import engine._
private[scalatest] val sourceFileName = "FlatSpec.scala"
/**
* Returns an Informer that during test execution will forward strings (and other objects) passed to its
* apply method to the current reporter. If invoked in a constructor, it
* will register the passed string for forwarding later during test execution. If invoked while this
* fixture.FlatSpec is being executed, such as from inside a test function, it will forward the information to
* the current reporter immediately. If invoked at any other time, it will
* throw an exception. This method can be called safely by any thread.
*/
implicit protected def info: Informer = atomicInformer.get
/**
* Register a test with the given spec text, optional tags, and test function value that takes no arguments.
* An invocation of this method is called an “example.”
*
* This method will register the test for later execution via an invocation of one of the execute
* methods. The name of the test will be a concatenation of the text of all surrounding describers,
* from outside in, and the passed spec text, with one space placed between each item. (See the documenation
* for testNames for an example.) The resulting test name must not have been registered previously on
* this FlatSpec instance.
*
* @param specText the specification text, which will be combined with the descText of any surrounding describers
* to form the test name
* @param testTags the optional list of tags for this test
* @param methodName caller's method name
* @param testFun the test function
* @throws DuplicateTestNameException if a test with the same name has been registered previously
* @throws TestRegistrationClosedException if invoked after run has been invoked on this suite
* @throws NullPointerException if specText or any passed test tag is null
*/
private def registerTestToRun(specText: String, testTags: List[Tag], methodName: String, testFun: FixtureParam => Any) {
// TODO: This is what was being used before but it is wrong
registerTest(specText, testFun, "itCannotAppearInsideAnotherIt", sourceFileName, methodName, 4, -3, None, None, None, testTags: _*)
}
/**
* Class that supports the registration of a “subject” being specified and tested via the
* instance referenced from fixture.FlatSpec's behavior field.
*
*
* This field enables syntax such as the following subject registration:
*
*
*
* behavior of "A Stack"
* ^
*
*
*
* For more information and examples of the use of the behavior field, see the main documentation
* for trait fixture.FlatSpec.
*
*/
protected final class BehaviorWord {
/**
* Supports the registration of a “subject” being specified and tested via the
* instance referenced from fixture.FlatSpec's behavior field.
*
*
* This method enables syntax such as the following subject registration:
*
*
*
* behavior of "A Stack"
* ^
*
*
*
* For more information and examples of the use of this method, see the main documentation
* for trait FlatSpec.
*
*/
def of(description: String) {
registerFlatBranch(description, "describeCannotAppearInsideAnIt", sourceFileName, "of", 3, 0)
}
}
/**
* Supports the registration of a “subject” being specified and tested.
*
*
* This field enables syntax such as the following subject registration:
*
*
*
* behavior of "A Stack"
* ^
*
*
*
* For more information and examples of the use of the behavior field, see the main documentation
* for trait FlatSpec.
*
*/
protected val behavior = new BehaviorWord
// TODO: Do a walk through. Are all these being used. I guess I'll find out when
// I document them.
/**
* Class that supports the registration of tagged tests via the ItWord instance
* referenced from fixture.FlatSpec's it field.
*
*
* This class enables syntax such as the following tagged test registration:
*
*
*
* it should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
* ^
*
*
*
* It also enables syntax such as the following registration of an ignored, tagged test:
*
*
*
* it should "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { ... }
* ^
*
*
*
* In addition, it enables syntax such as the following registration of a pending, tagged test:
*
*
*
* it should "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
* ^
*
*
*
* For more information and examples of the use of the it field to register tagged tests, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
protected final class ItVerbStringTaggedAs(verb: String, name: String, tags: List[Tag]) {
/**
* Supports the registration of tagged, no-arg tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it must "pop values in last-in-first-out order" taggedAs(SlowTest) in { () => ... }
* ^
*
*
*
* For examples of tagged test registration, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
def in(testFun: () => Any) {
registerTestToRun(verb.trim + " " + name.trim, tags, "in", new NoArgTestWrapper(testFun))
}
/**
* Supports the registration of tagged, one-arg tests (tests that take a FixtureParam object as a parameter) in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it must "pop values in last-in-first-out order" taggedAs(SlowTest) in { fixture => ... }
* ^
*
*
*
* For examples of tagged test registration, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
def in(testFun: FixtureParam => Any) {
registerTestToRun(verb.trim + " " + name.trim, tags, "in", testFun)
}
/**
* Supports the registration of pending, tagged tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it must "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
* ^
*
*
*
* For examples of pending test registration, see the Pending tests section in the main documentation
* for trait FlatSpec. And for examples of tagged test registration, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
def is(testFun: => PendingNothing) {
registerTestToRun(verb.trim + " " + name.trim, tags, "is", unusedFixtureParam => testFun)
}
/**
* Supports the registration of ignored, tagged, no-arg tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it must "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { () => ... }
* ^
*
*
*
* For examples of ignored test registration, see the Ignored tests section in the main documentation
* for trait FlatSpec. And for examples of tagged test registration, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
def ignore(testFun: () => Any) {
registerTestToIgnore(verb.trim + " " + name.trim, tags, "ignore", new NoArgTestWrapper(testFun))
}
/**
* Supports the registration of ignored, tagged, one-arg tests (tests that take a FixtureParam object
* as a parameter) in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it must "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { fixture => ... }
* ^
*
*
*
* For examples of ignored test registration, see the Ignored tests section in the main documentation
* for trait FlatSpec. And for examples of tagged test registration, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
def ignore(testFun: FixtureParam => Any) {
registerTestToIgnore(verb.trim + " " + name.trim, tags, "ignore", testFun)
}
}
/**
* Class that supports test registration via the instance referenced from fixture.FlatSpec's it field.
*
*
* This class enables syntax such as the following test registration:
*
*
*
* it should "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* It also enables syntax such as the following registration of an ignored test:
*
*
*
* it should "pop values in last-in-first-out order" ignore { ... }
* ^
*
*
*
* In addition, it enables syntax such as the following registration of a pending test:
*
*
*
* it should "pop values in last-in-first-out order" is (pending)
* ^
*
*
*
* And finally, it also enables syntax such as the following tagged test registration:
*
*
*
* it should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
* ^
*
*
*
* For more information and examples of the use of the it field, see the main documentation
* for trait FlatSpec.
*
*/
protected final class ItVerbString(verb: String, name: String) {
/**
* Supports the registration of no-arg tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it must "pop values in last-in-first-out order" in { () => ... }
* ^
*
*
*
* For examples of no-arg test registration, see the main documentation
* for trait FlatSpec.
*
*/
def in(testFun: () => Any) {
registerTestToRun(verb.trim + " " + name.trim, List(), "in", new NoArgTestWrapper(testFun))
}
/**
* Supports the registration of one-arg tests (tests that take a FixtureParam object as a parameter) in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it must "pop values in last-in-first-out order" in { fixture => ... }
* ^
*
*
*
* For examples of one-arg test registration, see the main documentation
* for trait fixture.FlatSpec.
*
*/
def in(testFun: FixtureParam => Any) {
registerTestToRun(verb.trim + " " + name.trim, List(), "in", testFun)
}
/**
* Supports the registration of pending tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it must "pop values in last-in-first-out order" is (pending)
* ^
*
*
*
* For examples of pending test registration, see the Pending tests section in the main documentation
* for trait FlatSpec.
*
*/
def is(testFun: => PendingNothing) {
registerTestToRun(verb.trim + " " + name.trim, List(), "is", unusedFixtureParam => testFun)
}
/**
* Supports the registration of ignored no-arg tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it must "pop values in last-in-first-out order" ignore { () => ... }
* ^
*
*
*
* For examples of ignored test registration, see the Ignored tests section in the main documentation
* for trait FlatSpec.
*
*/
def ignore(testFun: () => Any) {
registerTestToIgnore(verb.trim + " " + name.trim, List(), "ignore", new NoArgTestWrapper(testFun))
}
/**
* Supports the registration of ignored one-arg tests (tests that take a FixtureParam object as a parameter) in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it must "pop values in last-in-first-out order" ignore { fixture => ... }
* ^
*
*
*
* For examples of ignored test registration, see the Ignored tests section in the main documentation
* for trait FlatSpec.
*
*/
def ignore(testFun: FixtureParam => Any) {
registerTestToIgnore(verb.trim + " " + name.trim, List(), "ignore", testFun)
}
/**
* Supports the registration of tagged tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it must "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
* ^
*
*
*
* For examples of tagged test registration, see the Tagging tests section in the main documentation
* for trait FlatSpec.
*
*/
def taggedAs(firstTestTag: Tag, otherTestTags: Tag*) = {
val tagList = firstTestTag :: otherTestTags.toList
new ItVerbStringTaggedAs(verb, name, tagList)
}
}
/**
* Class that supports test (and shared test) registration via the instance referenced from fixture.FlatSpec's it field.
*
*
* This class enables syntax such as the following test registration:
*
*
*
* it should "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* It also enables syntax such as the following shared test registration:
*
*
*
* it should behave like nonEmptyStack(lastItemPushed)
* ^
*
*
*
* For more information and examples of the use of the it field, see the main documentation
* for trait FlatSpec.
*
*/
protected final class ItWord {
/**
* Supports the registration of tests with should in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it should "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* For examples of test registration, see the main documentation
* for trait FlatSpec.
*
*/
def should(string: String) = new ItVerbString("should", string)
/**
* Supports the registration of tests with must in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it must "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* For examples of test registration, see the main documentation
* for trait FlatSpec.
*
*/
def must(string: String) = new ItVerbString("must", string)
/**
* Supports the registration of tests with can in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it can "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* For examples of test registration, see the main documentation
* for trait FlatSpec.
*
*/
def can(string: String) = new ItVerbString("can", string)
/**
* Supports the registration of shared tests with should in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it should behave like nonFullStack(stackWithOneItem)
* ^
*
*
*
* For examples of shared tests, see the Shared tests section
* in the main documentation for trait FlatSpec.
*
*/
def should(behaveWord: BehaveWord) = behaveWord
/**
* Supports the registration of shared tests with must in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it must behave like nonFullStack(stackWithOneItem)
* ^
*
*
*
* For examples of shared tests, see the Shared tests section
* in the main documentation for trait FlatSpec.
*
*/
def must(behaveWord: BehaveWord) = behaveWord
/**
* Supports the registration of shared tests with can in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* it can behave like nonFullStack(stackWithOneItem)
* ^
*
*
*
* For examples of shared tests, see the Shared tests section
* in the main documentation for trait FlatSpec.
*
*/
def can(behaveWord: BehaveWord) = behaveWord
}
/**
* Supports test (and shared test) registration in fixture.FlatSpecs.
*
*
* This field enables syntax such as the following test registration:
*
*
*
* it should "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* It also enables syntax such as the following shared test registration:
*
*
*
* it should behave like nonEmptyStack(lastItemPushed)
* ^
*
*
*
* For more information and examples of the use of the it field, see the main documentation
* for trait FlatSpec.
*
*/
protected val it = new ItWord
/**
* Class that supports the registration of tagged tests via the TheyWord instance
* referenced from fixture.FlatSpec's they field.
*
*
* This class enables syntax such as the following tagged test registration:
*
*
*
* they should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
* ^
*
*
*
* It also enables syntax such as the following registration of an ignored, tagged test:
*
*
*
* they should "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { ... }
* ^
*
*
*
* In addition, it enables syntax such as the following registration of a pending, tagged test:
*
*
*
* they should "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
* ^
*
*
*
* For more information and examples of the use of the it field to register tagged tests, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
protected final class TheyVerbStringTaggedAs(verb: String, name: String, tags: List[Tag]) {
/**
* Supports the registration of tagged, no-arg tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they must "pop values in last-in-first-out order" taggedAs(SlowTest) in { () => ... }
* ^
*
*
*
* For examples of tagged test registration, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
def in(testFun: () => Any) {
registerTestToRun(verb.trim + " " + name.trim, tags, "in", new NoArgTestWrapper(testFun))
}
/**
* Supports the registration of tagged, one-arg tests (tests that take a FixtureParam object as a parameter) in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they must "pop values in last-in-first-out order" taggedAs(SlowTest) in { fixture => ... }
* ^
*
*
*
* For examples of tagged test registration, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
def in(testFun: FixtureParam => Any) {
registerTestToRun(verb.trim + " " + name.trim, tags, "in", testFun)
}
/**
* Supports the registration of pending, tagged tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they must "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
* ^
*
*
*
* For examples of pending test registration, see the Pending tests section in the main documentation
* for trait FlatSpec. And for examples of tagged test registration, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
def is(testFun: => PendingNothing) {
registerTestToRun(verb.trim + " " + name.trim, tags, "is", unusedFixtureParam => testFun)
}
/**
* Supports the registration of ignored, tagged, no-arg tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they must "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { () => ... }
* ^
*
*
*
* For examples of ignored test registration, see the Ignored tests section in the main documentation
* for trait FlatSpec. And for examples of tagged test registration, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
def ignore(testFun: () => Any) {
registerTestToIgnore(verb.trim + " " + name.trim, tags, "ignore", new NoArgTestWrapper(testFun))
}
/**
* Supports the registration of ignored, tagged, one-arg tests (tests that take a FixtureParam object
* as a parameter) in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they must "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { fixture => ... }
* ^
*
*
*
* For examples of ignored test registration, see the Ignored tests section in the main documentation
* for trait FlatSpec. And for examples of tagged test registration, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
def ignore(testFun: FixtureParam => Any) {
registerTestToIgnore(verb.trim + " " + name.trim, tags, "ignore", testFun)
}
}
/**
* Class that supports test registration via the instance referenced from fixture.FlatSpec's it field.
*
*
* This class enables syntax such as the following test registration:
*
*
*
* they should "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* It also enables syntax such as the following registration of an ignored test:
*
*
*
* they should "pop values in last-in-first-out order" ignore { ... }
* ^
*
*
*
* In addition, it enables syntax such as the following registration of a pending test:
*
*
*
* they should "pop values in last-in-first-out order" is (pending)
* ^
*
*
*
* And finally, it also enables syntax such as the following tagged test registration:
*
*
*
* they should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
* ^
*
*
*
* For more information and examples of the use of the it field, see the main documentation
* for trait FlatSpec.
*
*/
protected final class TheyVerbString(verb: String, name: String) {
/**
* Supports the registration of no-arg tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they must "pop values in last-in-first-out order" in { () => ... }
* ^
*
*
*
* For examples of no-arg test registration, see the main documentation
* for trait FlatSpec.
*
*/
def in(testFun: () => Any) {
registerTestToRun(verb.trim + " " + name.trim, List(), "in", new NoArgTestWrapper(testFun))
}
/**
* Supports the registration of one-arg tests (tests that take a FixtureParam object as a parameter) in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they must "pop values in last-in-first-out order" in { fixture => ... }
* ^
*
*
*
* For examples of one-arg test registration, see the main documentation
* for trait fixture.FlatSpec.
*
*/
def in(testFun: FixtureParam => Any) {
registerTestToRun(verb.trim + " " + name.trim, List(), "in", testFun)
}
/**
* Supports the registration of pending tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they must "pop values in last-in-first-out order" is (pending)
* ^
*
*
*
* For examples of pending test registration, see the Pending tests section in the main documentation
* for trait FlatSpec.
*
*/
def is(testFun: => PendingNothing) {
registerTestToRun(verb.trim + " " + name.trim, List(), "is", unusedFixtureParam => testFun)
}
/**
* Supports the registration of ignored no-arg tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they must "pop values in last-in-first-out order" ignore { () => ... }
* ^
*
*
*
* For examples of ignored test registration, see the Ignored tests section in the main documentation
* for trait FlatSpec.
*
*/
def ignore(testFun: () => Any) {
registerTestToIgnore(verb.trim + " " + name.trim, List(), "ignore", new NoArgTestWrapper(testFun))
}
/**
* Supports the registration of ignored one-arg tests (tests that take a FixtureParam object as a parameter) in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they must "pop values in last-in-first-out order" ignore { fixture => ... }
* ^
*
*
*
* For examples of ignored test registration, see the Ignored tests section in the main documentation
* for trait FlatSpec.
*
*/
def ignore(testFun: FixtureParam => Any) {
registerTestToIgnore(verb.trim + " " + name.trim, List(), "ignore", testFun)
}
/**
* Supports the registration of tagged tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they must "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
* ^
*
*
*
* For examples of tagged test registration, see the Tagging tests section in the main documentation
* for trait FlatSpec.
*
*/
def taggedAs(firstTestTag: Tag, otherTestTags: Tag*) = {
val tagList = firstTestTag :: otherTestTags.toList
new ItVerbStringTaggedAs(verb, name, tagList)
}
}
/**
* Class that supports test (and shared test) registration via the instance referenced from fixture.FlatSpec's it field.
*
*
* This class enables syntax such as the following test registration:
*
*
*
* they should "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* It also enables syntax such as the following shared test registration:
*
*
*
* they should behave like nonEmptyStack(lastItemPushed)
* ^
*
*
*
* For more information and examples of the use of the it field, see the main documentation
* for trait FlatSpec.
*
*/
protected final class TheyWord {
/**
* Supports the registration of tests with should in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they should "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* For examples of test registration, see the main documentation
* for trait FlatSpec.
*
*/
def should(string: String) = new ItVerbString("should", string)
/**
* Supports the registration of tests with must in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they must "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* For examples of test registration, see the main documentation
* for trait FlatSpec.
*
*/
def must(string: String) = new ItVerbString("must", string)
/**
* Supports the registration of tests with can in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they can "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* For examples of test registration, see the main documentation
* for trait FlatSpec.
*
*/
def can(string: String) = new ItVerbString("can", string)
/**
* Supports the registration of shared tests with should in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they should behave like nonFullStack(stackWithOneItem)
* ^
*
*
*
* For examples of shared tests, see the Shared tests section
* in the main documentation for trait FlatSpec.
*
*/
def should(behaveWord: BehaveWord) = behaveWord
/**
* Supports the registration of shared tests with must in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they must behave like nonFullStack(stackWithOneItem)
* ^
*
*
*
* For examples of shared tests, see the Shared tests section
* in the main documentation for trait FlatSpec.
*
*/
def must(behaveWord: BehaveWord) = behaveWord
/**
* Supports the registration of shared tests with can in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* they can behave like nonFullStack(stackWithOneItem)
* ^
*
*
*
* For examples of shared tests, see the Shared tests section
* in the main documentation for trait FlatSpec.
*
*/
def can(behaveWord: BehaveWord) = behaveWord
}
/**
* Supports test (and shared test) registration in fixture.FlatSpecs.
*
*
* This field enables syntax such as the following test registration:
*
*
*
* they should "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* It also enables syntax such as the following shared test registration:
*
*
*
* they should behave like nonEmptyStack(lastItemPushed)
* ^
*
*
*
* For more information and examples of the use of the it field, see the main documentation
* for trait FlatSpec.
*
*/
protected val they = new TheyWord
/**
* Class that supports registration of ignored, tagged tests via the IgnoreWord instance referenced
* from fixture.FlatSpec's ignore field.
*
*
* This class enables syntax such as the following registration of an ignored, tagged test:
*
*
*
* ignore should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
* ^
*
*
*
* In addition, it enables syntax such as the following registration of an ignored, tagged, pending test:
*
*
*
* ignore should "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
* ^
*
*
*
* Note: the is method is provided for completeness and design symmetry, given there's no way
* to prevent changing is to ignore and marking a pending test as ignored that way.
* Although it isn't clear why someone would want to mark a pending test as ignored, it can be done.
*
*
*
* For more information and examples of the use of the ignore field, see
* the Ignored tests section
* in the main documentation for trait FlatSpec. For examples of tagged test registration, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
protected final class IgnoreVerbStringTaggedAs(verb: String, name: String, tags: List[Tag]) {
/**
* Supports the registration of ignored, tagged, no-arg tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* ignore must "pop values in last-in-first-out order" taggedAs(SlowTest) in { () => ... }
* ^
*
*
*
* For examples of the registration of ignored tests, see the Ignored tests section
* in the main documentation for trait FlatSpec. For examples of tagged test registration, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
def in(testFun: () => Any) {
registerTestToIgnore(verb.trim + " " + name.trim, tags, "in", new NoArgTestWrapper(testFun))
}
/**
* Supports the registration of ignored, tagged, one-arg tests (tests that take a FixtureParam object as a parameter)
* in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* ignore must "pop values in last-in-first-out order" taggedAs(SlowTest) in { fixture => ... }
* ^
*
*
*
* For examples of the registration of ignored tests, see the Ignored tests section
* in the main documentation for trait FlatSpec. For examples of tagged test registration, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
def in(testFun: FixtureParam => Any) {
registerTestToIgnore(verb.trim + " " + name.trim, tags, "in", testFun)
}
/**
* Supports the registration of ignored, tagged, pending tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* ignore must "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
* ^
*
*
*
* Note: this is method is provided for completeness and design symmetry, given there's no way
* to prevent changing is to ignore and marking a pending test as ignored that way.
* Although it isn't clear why someone would want to mark a pending test as ignored, it can be done.
*
*
*
* For examples of pending test registration, see the Pending tests section in the main documentation
* for trait FlatSpec. For examples of the registration of ignored tests,
* see the Ignored tests section
* in the main documentation for trait FlatSpec. For examples of tagged test registration, see
* the Tagging tests section in the main documentation for trait FlatSpec.
*
*/
def is(testFun: => PendingNothing) {
registerTestToIgnore(verb.trim + " " + name.trim, tags, "is", unusedFixtureParam => testFun)
}
}
/**
* Class that supports registration of ignored tests via the IgnoreWord instance referenced
* from fixture.FlatSpec's ignore field.
*
*
* This class enables syntax such as the following registration of an ignored test:
*
*
*
* ignore should "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* In addition, it enables syntax such as the following registration of an ignored, pending test:
*
*
*
* ignore should "pop values in last-in-first-out order" is (pending)
* ^
*
*
* Note: the is method is provided for completeness and design symmetry, given there's no way
* to prevent changing is to ignore and marking a pending test as ignored that way.
* Although it isn't clear why someone would want to mark a pending test as ignored, it can be done.
*
*
*
* And finally, it also enables syntax such as the following ignored, tagged test registration:
*
*
*
* ignore should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
* ^
*
*
*
*
* For more information and examples of the use of the ignore field, see the Ignored tests section
* in the main documentation for trait FlatSpec.
*
*/
protected final class IgnoreVerbString(verb: String, name: String) {
/**
* Supports the registration of ignored, no-arg tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* ignore must "pop values in last-in-first-out order" in { () => ... }
* ^
*
*
*
* For examples of the registration of ignored tests, see the Ignored tests section
* in the main documentation for trait FlatSpec.
*
*/
def in(testFun: () => Any) {
registerTestToIgnore(verb.trim + " " + name.trim, List(), "in", new NoArgTestWrapper(testFun))
}
/**
* Supports the registration of ignored, one-arg tests (tests that take a FixtureParam object
* as a parameter) in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* ignore must "pop values in last-in-first-out order" in { fixture => ... }
* ^
*
*
*
* For examples of the registration of ignored tests, see the Ignored tests section
* in the main documentation for trait FlatSpec.
*
*/
def in(testFun: FixtureParam => Any) {
registerTestToIgnore(verb.trim + " " + name.trim, List(), "in", testFun)
}
/**
* Supports the registration of ignored, pending tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* ignore must "pop values in last-in-first-out order" is (pending)
* ^
*
*
*
* Note: this is method is provided for completeness and design symmetry, given there's no way
* to prevent changing is to ignore and marking a pending test as ignored that way.
* Although it isn't clear why someone would want to mark a pending test as ignored, it can be done.
*
*
*
* For examples of pending test registration, see the Pending tests section in the main documentation
* for trait FlatSpec. For examples of the registration of ignored tests,
* see the Ignored tests section
* in the main documentation for trait FlatSpec.
*
*/
def is(testFun: => PendingNothing) {
registerTestToIgnore(verb.trim + " " + name.trim, List(), "is", unusedFixtureParam => testFun)
}
/**
* Supports the registration of ignored, tagged tests in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* ignore must "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
* ^
*
*
*
* For examples of tagged test registration, see the Tagging tests section in the main documentation
* for trait FlatSpec. For examples of the registration of ignored tests,
* see the Ignored tests section
* in the main documentation for trait FlatSpec.
*
*/
def taggedAs(firstTestTag: Tag, otherTestTags: Tag*) = {
val tagList = firstTestTag :: otherTestTags.toList
new IgnoreVerbStringTaggedAs(verb, name, tagList)
}
}
/**
* Class that supports registration of ignored tests via the instance referenced from fixture.FlatSpec's ignore field.
*
*
* This class enables syntax such as the following registration of an ignored test:
*
*
*
* ignore should "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* For more information and examples of the use of the ignore field, see Ignored tests section
* in the main documentation for this trait.
*
*/
protected final class IgnoreWord {
/**
* Supports the registration of ignored tests with should in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* ignore should "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* For more information and examples of the use of the ignore field, see Ignored tests section
* in the main documentation for trait FlatSpec.
*
*/
def should(string: String) = new IgnoreVerbString("should", string)
/**
* Supports the registration of ignored tests with must in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* ignore must "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* For more information and examples of the use of the ignore field, see Ignored tests section
* in the main documentation for trait FlatSpec.
*
*/
def must(string: String) = new IgnoreVerbString("must", string)
/**
* Supports the registration of ignored tests with can in a fixture.FlatSpec.
*
*
* This method supports syntax such as the following:
*
*
*
* ignore can "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* For more information and examples of the use of the ignore field, see Ignored tests section
* in the main documentation for trait FlatSpec.
*
*/
def can(string: String) = new IgnoreVerbString("can", string)
}
/**
* Supports registration of ignored tests in fixture.FlatSpecs.
*
*
* This field enables syntax such as the following registration of an ignored test:
*
*
*
* ignore should "pop values in last-in-first-out order" in { ... }
* ^
*
*
*
* For more information and examples of the use of the ignore field, see the
* Ignored tests section in the main documentation for trait FlatSpec.
*
*/
protected val ignore = new IgnoreWord
/**
* Class that supports test registration in shorthand form.
*
*
* For example, this class enables syntax such as the following test registration
* in shorthand form:
*
*
*
* "A Stack (when empty)" should "be empty" in { ... }
* ^
*
*
*
* This class also enables syntax such as the following ignored test registration
* in shorthand form:
*
*
*
* "A Stack (when empty)" should "be empty" ignore { ... }
* ^
*
*
*
* This class is used via an implicit conversion (named convertToInAndIgnoreMethods)
* from ResultOfStringPassedToVerb. The ResultOfStringPassedToVerb class
* does not declare any methods named in, because the
* type passed to in differs in a FlatSpec and a org.scalatest.fixture.FlatSpec.
* A org.scalatest.fixture.FlatSpec needs two in methods, one that takes a no-arg
* test function and another that takes a one-arg test function (a test that takes a
* FixtureParam as its parameter). By constrast, a FlatSpec needs
* only one in method that takes a by-name parameter. As a result,
* FlatSpec and org.scalatest.fixture.FlatSpec each provide an implicit conversion
* from ResultOfStringPassedToVerb to a type that provides the appropriate
* in methods.
*
*
* @author Bill Venners
*/
protected final class InAndIgnoreMethods(resultOfStringPassedToVerb: ResultOfStringPassedToVerb) {
import resultOfStringPassedToVerb.verb
import resultOfStringPassedToVerb.rest
/**
* Supports the registration of no-arg tests in shorthand form.
*
*
* This method supports syntax such as the following:
*
*
*
* "A Stack" must "pop values in last-in-first-out order" in { () => ... }
* ^
*
*
*
* For examples of test registration, see the main documentation
* for trait fixture.FlatSpec.
*
*/
def in(testFun: () => Any) {
registerTestToRun(verb.trim + " " + rest.trim, List(), "in", new NoArgTestWrapper(testFun))
}
/**
* Supports the registration of ignored, no-arg tests in shorthand form.
*
*
* This method supports syntax such as the following:
*
*
*
* "A Stack" must "pop values in last-in-first-out order" ignore { () => ... }
* ^
*
*
*
* For examples of ignored test registration, see the Ignored tests section
* in the main documentation for trait FlatSpec.
*
*/
def ignore(testFun: () => Any) {
registerTestToIgnore(verb.trim + " " + rest.trim, List(), "ignore", new NoArgTestWrapper(testFun))
}
/**
* Supports the registration of one-arg tests (tests that take a FixtureParam parameter) in shorthand form.
*
*
* This method supports syntax such as the following:
*
*
*
* "A Stack" must "pop values in last-in-first-out order" in { fixture => ... }
* ^
*
*
*
* For examples of test registration, see the main documentation
* for trait fixture.FlatSpec.
*
*/
def in(testFun: FixtureParam => Any) {
registerTestToRun(verb.trim + " " + rest.trim, List(), "in", testFun)
}
/**
* Supports the registration of ignored, one-arg tests (tests that take a FixtureParam parameter) in shorthand form.
*
*
* This method supports syntax such as the following:
*
*
*
* "A Stack" must "pop values in last-in-first-out order" ignore { fixture => ... }
* ^
*
*
*
* For examples of ignored test registration, see the Ignored tests section
* in the main documentation for trait FlatSpec.
*
*/
def ignore(testFun: FixtureParam => Any) {
registerTestToIgnore(verb.trim + " " + rest.trim, List(), "ignore", testFun)
}
}
/**
* Implicitly converts an object of type ResultOfStringPassedToVerb to an
* InAndIgnoreMethods, to enable in and ignore
* methods to be invokable on that object.
*/
protected implicit def convertToInAndIgnoreMethods(resultOfStringPassedToVerb: ResultOfStringPassedToVerb) =
new InAndIgnoreMethods(resultOfStringPassedToVerb)
/**
* Class that supports tagged test registration in shorthand form.
*
*
* For example, this class enables syntax such as the following tagged test registration
* in shorthand form:
*
*
*
* "A Stack (when empty)" should "be empty" taggedAs() in { ... }
* ^
*
*
*
* This class also enables syntax such as the following tagged, ignored test registration
* in shorthand form:
*
*
*
* "A Stack (when empty)" should "be empty" taggedAs(SlowTest) ignore { ... }
* ^
*
*
*
* This class is used via an implicit conversion (named convertToInAndIgnoreMethodsAfterTaggedAs)
* from ResultOfTaggedAsInvocation. The ResultOfTaggedAsInvocation class
* does not declare any methods named in, because the
* type passed to in differs in a FlatSpec and a fixture.FlatSpec.
* A fixture.FlatSpec needs two in methods, one that takes a no-arg
* test function and another that takes a one-arg test function (a test that takes a
* FixtureParam as its parameter). By constrast, a FlatSpec needs
* only one in method that takes a by-name parameter. As a result,
* FlatSpec and fixture.FlatSpec each provide an implicit conversion
* from ResultOfTaggedAsInvocation to a type that provides the appropriate
* in methods.
*
*
* @author Bill Venners
*/
protected final class InAndIgnoreMethodsAfterTaggedAs(resultOfTaggedAsInvocation: ResultOfTaggedAsInvocation) {
import resultOfTaggedAsInvocation.verb
import resultOfTaggedAsInvocation.rest
import resultOfTaggedAsInvocation.{tags => tagsList}
/**
* Supports the registration of tagged, no-arg tests in shorthand form.
*
*
* This method supports syntax such as the following:
*
*
*
* "A Stack" must "pop values in last-in-first-out order" taggedAs(SlowTest) in { () => ... }
* ^
*
*
*
* For examples of tagged test registration, see the Tagging tests section
* in the main documentation for trait FlatSpec.
*
*/
def in(testFun: () => Any) {
registerTestToRun(verb.trim + " " + rest.trim, tagsList, "in", new NoArgTestWrapper(testFun))
}
/**
* Supports the registration of tagged, ignored, no-arg tests in shorthand form.
*
*
* This method supports syntax such as the following:
*
*
*
* "A Stack" must "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { () => ... }
* ^
*
*
*
* For examples of ignored test registration, see the Ignored tests section
* in the main documentation for trait FlatSpec.
* For examples of tagged test registration, see the Tagging tests section
* in the main documentation for trait FlatSpec.
*
*/
def ignore(testFun: () => Any) {
registerTestToIgnore(verb.trim + " " + rest.trim, tagsList, "ignore", new NoArgTestWrapper(testFun))
}
/**
* Supports the registration of tagged, one-arg tests (tests that take a FixtureParam parameter) in shorthand form.
*
*
* This method supports syntax such as the following:
*
*
*
* "A Stack" must "pop values in last-in-first-out order" taggedAs(SlowTest) in { fixture => ... }
* ^
*
*
*
* For examples of tagged test registration, see the Tagging tests section
* in the main documentation for trait FlatSpec.
*
*/
def in(testFun: FixtureParam => Any) {
registerTestToRun(verb.trim + " " + rest.trim, tagsList, "in", testFun)
}
/**
* Supports the registration of tagged, ignored, one-arg tests (tests that take a FixtureParam parameter) in shorthand form.
*
*
* This method supports syntax such as the following:
*
*
*
* "A Stack" must "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { fixture => ... }
* ^
*
*
*
* For examples of ignored test registration, see the Ignored tests section
* in the main documentation for trait FlatSpec.
* For examples of tagged test registration, see the Tagging tests section
* in the main documentation for trait FlatSpec.
*
*/
def ignore(testFun: FixtureParam => Any) {
registerTestToIgnore(verb.trim + " " + rest.trim, tagsList, "ignore", testFun)
}
}
/**
* Implicitly converts an object of type ResultOfTaggedAsInvocation to an
* InAndIgnoreMethodsAfterTaggedAs, to enable in and ignore
* methods to be invokable on that object.
*/
protected implicit def convertToInAndIgnoreMethodsAfterTaggedAs(resultOfTaggedAsInvocation: ResultOfTaggedAsInvocation) =
new InAndIgnoreMethodsAfterTaggedAs(resultOfTaggedAsInvocation)
/**
* Supports the shorthand form of test registration.
*
*
* For example, this method enables syntax such as the following:
*
*
*
* "A Stack (when empty)" should "be empty" in { ... }
* ^
*
*
*
* This function is passed as an implicit parameter to a should method
* provided in ShouldVerb, a must method
* provided in MustVerb, and a can method
* provided in CanVerb. When invoked, this function registers the
* subject description (the first parameter to the function) and returns a ResultOfStringPassedToVerb
* initialized with the verb and rest parameters (the second and third parameters to
* the function, respectively).
*
*/
protected implicit val shorthandTestRegistrationFunction: (String, String, String) => ResultOfStringPassedToVerb = {
(subject, verb, rest) => {
registerFlatBranch(subject, "describeCannotAppearInsideAnIt", sourceFileName, "apply", 5, 0)
new ResultOfStringPassedToVerb(verb, rest) {
def is(testFun: => PendingNothing) {
registerTestToRun(verb.trim + " " + rest.trim, List(), "is", unusedFixtureParam => testFun)
}
def taggedAs(firstTestTag: Tag, otherTestTags: Tag*) = {
val tagList = firstTestTag :: otherTestTags.toList
new ResultOfTaggedAsInvocation(verb, rest, tagList) {
// "A Stack" must "test this" taggedAs(mytags.SlowAsMolasses) is (pending)
// ^
def is(testFun: => PendingNothing) {
registerTestToRun(verb.trim + " " + rest.trim, tags, "is", new NoArgTestWrapper(testFun _))
}
}
}
}
}
}
// TODO: Get rid of unusedfixture, and use NoArgTestFunction instead
/**
* Supports the shorthand form of shared test registration.
*
*
* For example, this method enables syntax such as the following:
*
*
*
* "A Stack (with one item)" should behave like nonEmptyStack(stackWithOneItem, lastValuePushed)
* ^
*
*
*
* This function is passed as an implicit parameter to a should method
* provided in ShouldVerb, a must method
* provided in MustVerb, and a can method
* provided in CanVerb. When invoked, this function registers the
* subject description (the parameter to the function) and returns a BehaveWord.
*
*/
protected implicit val shorthandSharedTestRegistrationFunction: (String) => BehaveWord = {
(left) => {
registerFlatBranch(left, "describeCannotAppearInsideAnIt", sourceFileName, "apply", 5, 0)
new BehaveWord
}
}
/**
* Register a test to ignore, which has the given spec text, optional tags, and test function value that takes no arguments.
* This method will register the test for later ignoring via an invocation of one of the execute
* methods. This method exists to make it easy to ignore an existing test by changing the call to it
* to ignore without deleting or commenting out the actual test code. The test will not be executed, but a
* report will be sent that indicates the test was ignored. The name of the test will be a concatenation of the text of all surrounding describers,
* from outside in, and the passed spec text, with one space placed between each item. (See the documenation
* for testNames for an example.) The resulting test name must not have been registered previously on
* this FlatSpec instance.
*
* @param specText the specification text, which will be combined with the descText of any surrounding describers
* to form the test name
* @param testTags the optional list of tags for this test
* @param methodName caller's method name
* @param testFun the test function
* @throws DuplicateTestNameException if a test with the same name has been registered previously
* @throws TestRegistrationClosedException if invoked after run has been invoked on this suite
* @throws NullPointerException if specText or any passed test tag is null
*/
private def registerTestToIgnore(specText: String, testTags: List[Tag], methodName: String, testFun: FixtureParam => Any) {
registerIgnoredTest(specText, testFun, "ignoreCannotAppearInsideAnIt", sourceFileName, methodName, 4, -3, None, testTags: _*)
}
/**
* A Map whose keys are String tag names to which tests in this FlatSpec belong, and values
* the Set of test names that belong to each tag. If this fixture.FlatSpec contains no tags, this method returns an empty Map.
*
*
* This trait's implementation returns tags that were passed as strings contained in Tag objects passed to
* methods test and ignore.
*
*
*
* In addition, this trait's implementation will also auto-tag tests with class level annotations.
* For example, if you annotate @Ignore at the class level, all test methods in the class will be auto-annotated with @Ignore.
*
*/
override def tags: Map[String, Set[String]] = autoTagClassAnnotations(atomic.get.tagsMap, this)
/**
* Run a test. This trait's implementation runs the test registered with the name specified by
* testName. Each test's name is a concatenation of the text of all describers surrounding a test,
* from outside in, and the test's spec text, with one space placed between each item. (See the documenation
* for testNames for an example.)
*
* @param testName the name of one test to execute.
* @param reporter the Reporter to which results will be reported
* @param stopper the Stopper that will be consulted to determine whether to stop execution early.
* @param configMap a Map of properties that can be used by this FlatSpec's executing tests.
* @throws NullPointerException if any of testName, reporter, stopper, or configMap
* is null.
*/
protected override def runTest(testName: String, args: Args): Status = {
def invokeWithFixture(theTest: TestLeaf) {
theTest.testFun match {
case wrapper: NoArgTestWrapper[_] =>
withFixture(new FixturelessTestFunAndConfigMap(testName, wrapper.test, args.configMap))
case fun => withFixture(new TestFunAndConfigMap(testName, fun, args.configMap))
}
}
runTestImpl(thisSuite, testName, args, true, invokeWithFixture)
}
/**
*
* Run zero to many of this FlatSpec's tests.
*
*
*
* This method takes a testName parameter that optionally specifies a test to invoke.
* If testName is Some, this trait's implementation of this method
* invokes runTest on this object, passing in:
*
*
*
* testName - the String value of the testName Option passed
* to this methodreporter - the Reporter passed to this method, or one that wraps and delegates to itstopper - the Stopper passed to this method, or one that wraps and delegates to itconfigMap - the configMap passed to this method, or one that wraps and delegates to it
*
*
* This method takes a Set of tag names that should be included (tagsToInclude), and a Set
* that should be excluded (tagsToExclude), when deciding which of this Suite's tests to execute.
* If tagsToInclude is empty, all tests will be executed
* except those those belonging to tags listed in the tagsToExclude Set. If tagsToInclude is non-empty, only tests
* belonging to tags mentioned in tagsToInclude, and not mentioned in tagsToExclude
* will be executed. However, if testName is Some, tagsToInclude and tagsToExclude are essentially ignored.
* Only if testName is None will tagsToInclude and tagsToExclude be consulted to
* determine which of the tests named in the testNames Set should be run. For more information on trait tags, see the main documentation for this trait.
*
*
*
* If testName is None, this trait's implementation of this method
* invokes testNames on this Suite to get a Set of names of tests to potentially execute.
* (A testNames value of None essentially acts as a wildcard that means all tests in
* this Suite that are selected by tagsToInclude and tagsToExclude should be executed.)
* For each test in the testName Set, in the order
* they appear in the iterator obtained by invoking the elements method on the Set, this trait's implementation
* of this method checks whether the test should be run based on the tagsToInclude and tagsToExclude Sets.
* If so, this implementation invokes runTest, passing in:
*
*
*
* testName - the String name of the test to run (which will be one of the names in the testNames Set)reporter - the Reporter passed to this method, or one that wraps and delegates to itstopper - the Stopper passed to this method, or one that wraps and delegates to itconfigMap - the configMap passed to this method, or one that wraps and delegates to it
*
* @param testName an optional name of one test to execute. If None, all relevant tests should be executed.
* I.e., None acts like a wildcard that means execute all relevant tests in this FlatSpec.
* @param args the Args for this run
*
* @throws NullPointerException if any of testName, reporter, stopper, tagsToInclude,
* tagsToExclude, or configMap is null.
*/
protected override def runTests(testName: Option[String], args: Args): Status = {
runTestsImpl(thisSuite, testName, args, info, true, runTest)
}
/**
* An immutable Set of test names. If this fixture.FlatSpec contains no tests, this method returns an
* empty Set.
*
*
* This trait's implementation of this method will return a set that contains the names of all registered tests. The set's
* iterator will return those names in the order in which the tests were registered. Each test's name is composed
* of the concatenation of the text of each surrounding describer, in order from outside in, and the text of the
* example itself, with all components separated by a space.
*
*/
override def testNames: Set[String] = {
// I'm returning a ListSet here so that they tests will be run in registration order
ListSet(atomic.get.testNamesList.toArray: _*)
}
override def run(testName: Option[String], args: Args): Status = {
runImpl(thisSuite, testName, args, super.run)
}
/**
* Supports shared test registration in fixture.FlatSpecs.
*
*
* This field supports syntax such as the following:
*
*
*
* it should behave like nonFullStack(stackWithOneItem)
* ^
*
*
*
* For more information and examples of the use of behave, see the Shared tests section
* in the main documentation for trait FlatSpec.
*
*/
protected val behave = new BehaveWord
/**
* Suite style name.
*/
final override val styleName: String = "org.scalatest.fixture.FlatSpec"
override def testDataFor(testName: String, theConfigMap: Map[String, Any] = Map.empty): TestData = createTestDataFor(testName, theConfigMap, this)
}