org.smallmind.spark.tanukisoft.maven.bin.sh.script.in Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of spark-tanukisoft-maven-plugin Show documentation
Show all versions of spark-tanukisoft-maven-plugin Show documentation
Tanukisoft Wrapper Maven Plugin
#! /bin/sh
#
# Copyright (c) 1999, 2016 Tanuki Software, Ltd.
# http://www.tanukisoftware.com
# All rights reserved.
#
# This software is the proprietary information of Tanuki Software.
# You shall use it only in accordance with the terms of the
# license agreement you entered into with Tanuki Software.
# http://wrapper.tanukisoftware.com/doc/english/licenseOverview.html
#
# Java Service Wrapper sh script. Suitable for starting and stopping
# wrapped Java applications on UNIX platforms.
#
#-----------------------------------------------------------------------------
# These settings can be modified to fit the needs of your application
# Optimized for use with version 3.5.30 of the Wrapper.
# IMPORTANT - Please always stop and uninstall an application before making
# any changes to this file. Failure to do so could remove the
# script's ability to control the application.
# Initialization block for the install_initd and remove_initd scripts used by
# SUSE linux, CentOS and RHEL distributions.
# Note: From CentOS 6, make sure the BEGIN INIT INFO section is before any line
# of code otherwise the service won't be displayed in the Service
# Configuration GUI.
### BEGIN INIT INFO
# Provides: @app.name@
# Required-Start: $local_fs $network $syslog
# Should-Start:
# Required-Stop:
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: @app.long.name@
# Description: @app.description@
### END INIT INFO
# Application
APP_NAME="@app.name@"
APP_LONG_NAME="@app.long.name@"
# If uncommented (and set to false), APP_NAME and APP_LONG_NAME will no longer
# be passed to the wrapper. See documentation for details.
#APP_NAME_PASS_TO_WRAPPER=false
# Wrapper
WRAPPER_CMD="./wrapper"
WRAPPER_CONF="../conf/wrapper.conf"
# Priority at which to run the wrapper. See "man nice" for valid priorities.
# nice is only used if a priority is specified.
PRIORITY=
# Location of the pid file.
PIDDIR="."
# PIDFILE_CHECK_PID tells the script to double check whether the pid in the pid
# file actually exists and belongs to this application. When not set, only
# check the pid, but not what it is. This is only needed when multiple
# applications need to share the same pid file.
PIDFILE_CHECK_PID=true
# FIXED_COMMAND tells the script to use a hard coded action rather than
# expecting the first parameter of the command line to be the command.
# By default the command will will be expected to be the first parameter.
#FIXED_COMMAND=console
# PASS_THROUGH tells the script to pass all arguments through to the JVM
# as is. If FIXED_COMMAND is specified then all arguments will be passed.
# If not set then all arguments starting with the second will be passed.
#PASS_THROUGH=true
# If uncommented, causes the Wrapper to be shutdown using an anchor file.
# When launched with the 'start' command, it will also ignore all INT and
# TERM signals.
#IGNORE_SIGNALS=true
# Wrapper will start the JVM asynchronously. Your application may have some
# initialization tasks and it may be desirable to wait a few seconds
# before returning. For example, to delay the invocation of following
# startup scripts. Setting WAIT_AFTER_STARTUP to a positive number will
# cause the start command to delay for the indicated period of time
# (in seconds).
#
WAIT_AFTER_STARTUP=0
# If set, wait for the wrapper to report that the daemon has started
WAIT_FOR_STARTED_STATUS=true
WAIT_FOR_STARTED_TIMEOUT=120
# If set, the status, start_msg and stop_msg commands will print out detailed
# state information on the Wrapper and Java processes.
#DETAIL_STATUS=true
# If set, the 'pause' and 'resume' commands will be enabled. These make it
# possible to pause the JVM or Java application without completely stopping
# the Wrapper. See the wrapper.pausable and wrapper.pausable.stop_jvm
# properties for more information.
#PAUSABLE=true
# If specified, the Wrapper will be run as the specified user.
# IMPORTANT - Make sure that the user has the required privileges to write
# the PID file and wrapper.log files. Failure to be able to write the log
# file will cause the Wrapper to exit without any way to write out an error
# message.
# NOTE - This will set the user which is used to run the Wrapper as well as
# the JVM and is not useful in situations where a privileged resource or
# port needs to be allocated prior to the user being changed.
#RUN_AS_USER=
# Set the full path to the 'su' command (substitute user).
# NOTE - In case 'su' is not in the PATH, you can set the absolute path here,
# for example:
# SU_BIN=/bin/su
# NOTE - For Red Hat, the script will use '/sbin/runuser' if it is present and
# ignore the value of SU_BIN.
SU_BIN=su
# Set option for 'su'.
# In case the user set in RUN_AS_USER has no bash set, the 'su' command will fail.
# The workaround for GNU/Linux system is to specify which bash to use with
# the '-s' option.
#SU_OPTS="-s /bin/bash"
# Set the full path to the 'id' command.
# For example:
# ID_BIN=/usr/bin/id
ID_BIN=id
# By default we show a detailed usage block. Uncomment to show brief usage.
#BRIEF_USAGE=true
# OS service management tool: flag for using Upstart when installing (rather than init.d rc.d).
USE_UPSTART=
# OS service management tool: flag for using systemd when installing.
USE_SYSTEMD=
# Flag for AIX to start/stop the Wrapper without using the System Resource
# Controller (SRC).This is useful when you want to start the Wrapper as a
# daemon without installation or when APP_NAME is longer than 14 chars.
SKIP_SRC=
# When installing on Mac OSX platforms, the following domain will be used to
# prefix the plist file name.
PLIST_DOMAIN=org.tanukisoftware.wrapper
# When installing on Mac OSX platforms, this parameter controls whether the daemon
# is to be kept continuously running or to let demand and conditions control the
# invocation.
MACOSX_KEEP_RUNNING="false"
# The following two lines are used by the chkconfig command. Change as is
# appropriate for your application. They should remain commented.
# chkconfig: 2345 20 80
# description: @app.long.name@
# Set run level to use when installing the application to start and stop on
# system startup and shutdown. It is important that the application always
# be uninstalled before making any changes to the run levels.
# It is also possible to specify different run levels based on the individual
# platform. When doing so this script will look for defined run levels in
# the following order:
# 1) "RUN_LEVEL_S_$DIST_OS" or "RUN_LEVEL_K_$DIST_OS", where "$DIST_OS" is
# the value of DIST_OS. "RUN_LEVEL_S_solaris=20" for example.
# 2) RUN_LEVEL_S or RUN_LEVEL_K, to specify specify start or stop run levels.
# 3) RUN_LEVEL, to specify a general run level.
RUN_LEVEL=20
# List of files to source prior to executing any commands. Use ';' as delimiter.
# For example:
# FILES_TO_SOURCE="/home/user/.bashrc;anotherfile;../file3"
FILES_TO_SOURCE=
# Do not modify anything beyond this point
#-----------------------------------------------------------------------------
# check if we are running under Cygwin terminal.
# Note: on some OS's (for example Solaris, MacOS), -o is not a valid parameter
# and it shows an error message. We redirect stderr to null so the error message
# doesn't show up.
CYGWIN=`uname -o 2>/dev/null`
if [ "$CYGWIN" = "Cygwin" ]
then
eval echo `gettext 'This script is not compatible with Cygwin. Please use the Wrapper batch files to control the Wrapper.'`
exit 1
fi
if [ -n "$FIXED_COMMAND" ]
then
COMMAND="$FIXED_COMMAND"
else
COMMAND="$1"
fi
# check if there is a parameter "sysd"
SYSD=
if [ $# -gt 1 ] ; then
if [ $2 = "sysd" ] ; then
SYSD=1
fi
fi
# default location for the service file
SYSTEMD_SERVICE_FILE="/etc/systemd/system/$APP_NAME.service"
# Required for HP-UX Startup
if [ `uname -s` = "HP-UX" -o `uname -s` = "HP-UX64" ] ; then
PATH=$PATH:/usr/bin
fi
# Get the fully qualified path to the script
case $0 in
/*)
SCRIPT="$0"
;;
*)
PWD=`pwd`
SCRIPT="$PWD/$0"
;;
esac
# Resolve the true real path without any sym links.
CHANGED=true
while [ "X$CHANGED" != "X" ]
do
# Change spaces to ":" so the tokens can be parsed.
SAFESCRIPT=`echo $SCRIPT | sed -e 's; ;:;g'`
# Get the real path to this script, resolving any symbolic links
TOKENS=`echo $SAFESCRIPT | sed -e 's;/; ;g'`
REALPATH=
for C in $TOKENS; do
# Change any ":" in the token back to a space.
C=`echo $C | sed -e 's;:; ;g'`
REALPATH="$REALPATH/$C"
# If REALPATH is a sym link, resolve it. Loop for nested links.
while [ -h "$REALPATH" ] ; do
LS="`ls -ld "$REALPATH"`"
LINK="`expr "$LS" : '.*-> \(.*\)$'`"
if expr "$LINK" : '/.*' > /dev/null; then
# LINK is absolute.
REALPATH="$LINK"
else
# LINK is relative.
REALPATH="`dirname "$REALPATH"`""/$LINK"
fi
done
done
if [ "$REALPATH" = "$SCRIPT" ]
then
CHANGED=""
else
SCRIPT="$REALPATH"
fi
done
# Get the location of the script.
REALDIR=`dirname "$REALPATH"`
# Normalize the path
REALDIR=`cd "${REALDIR}"; pwd`
# If the PIDDIR is relative, set its value relative to the full REALPATH to avoid problems if
# the working directory is later changed.
FIRST_CHAR=`echo $PIDDIR | cut -c1,1`
if [ "$FIRST_CHAR" != "/" ]
then
PIDDIR=$REALDIR/$PIDDIR
fi
# Same test for WRAPPER_CMD
FIRST_CHAR=`echo $WRAPPER_CMD | cut -c1,1`
if [ "$FIRST_CHAR" != "/" ]
then
WRAPPER_CMD=$REALDIR/$WRAPPER_CMD
fi
# Same test for WRAPPER_CONF
FIRST_CHAR=`echo $WRAPPER_CONF | cut -c1,1`
if [ "$FIRST_CHAR" != "/" ]
then
WRAPPER_CONF=$REALDIR/$WRAPPER_CONF
fi
# Process ID
ANCHORFILE="$PIDDIR/$APP_NAME.anchor"
COMMANDFILE="$PIDDIR/$APP_NAME.command"
STATUSFILE="$PIDDIR/$APP_NAME.status"
JAVASTATUSFILE="$PIDDIR/$APP_NAME.java.status"
PIDFILE="$PIDDIR/$APP_NAME.pid"
LOCKDIR="/var/lock/subsys"
LOCKFILE="$LOCKDIR/$APP_NAME"
pid=""
# Install status
installedStatus=0 # 0: not installed
# 1: installed (default)
# 2: installed with systemd
# 3: installed with upstart
# 4: installed with SRC (complete: both lssrc & lsitab returned a record)
# 5: installed with SRC (partial: lssrc xor lsitab returned a record)
installedWith=""
# Resolve the location of the 'ps' command
PS_BIN="/usr/ucb/ps"
if [ ! -x "$PS_BIN" ]
then
PS_BIN="/usr/bin/ps"
if [ ! -x "$PS_BIN" ]
then
PS_BIN="/bin/ps"
if [ ! -x "$PS_BIN" ]
then
eval echo `gettext 'Unable to locate "ps".'`
eval echo `gettext 'Please report this message along with the location of the command on your system.'`
exit 1
fi
fi
fi
TR_BIN="/usr/bin/tr"
if [ ! -x "$TR_BIN" ]
then
TR_BIN="/bin/tr"
if [ ! -x "$TR_BIN" ]
then
eval echo `gettext 'Unable to locate "tr".'`
eval echo `gettext 'Please report this message along with the location of the command on your system.'`
exit 1
fi
fi
# Resolve the os
DIST_OS=`uname -s | $TR_BIN "[A-Z]" "[a-z]" | $TR_BIN -d ' '`
case "$DIST_OS" in
'sunos')
DIST_OS="solaris"
;;
'hp-ux' | 'hp-ux64')
# HP-UX needs the XPG4 version of ps (for -o args)
DIST_OS="hpux"
UNIX95=""
export UNIX95
;;
'darwin')
DIST_OS="macosx"
;;
'unix_sv')
DIST_OS="unixware"
;;
'os/390')
DIST_OS="zos"
;;
esac
# Compare Versions $1<$2=0, $1==$2=1, $1>$2=2
compareVersions () {
if [ "$1" = "$2" ]
then
return 1
else
local i=1
while true
do
local v1=`echo "$1" | cut -d '.' -f $i`
local v2=`echo "$2" | cut -d '.' -f $i`
if [ "X$v1" = "X" ]
then
if [ "X$v2" = "X" ]
then
return 1
fi
v1="0"
elif [ "X$v2" = "X" ]
then
v2="0"
fi
if [ $v1 -lt $v2 ]
then
return 0
elif [ $v1 -gt $v2 ]
then
return 2
fi
i=`expr $i + 1`
done
fi
}
# Resolve the architecture
if [ "$DIST_OS" = "macosx" ]
then
OS_VER=`sw_vers | grep 'ProductVersion:' | grep -o '[0-9]*\.[0-9]*\.[0-9]*\|[0-9]*\.[0-9]*'`
DIST_ARCH="universal"
compareVersions "$OS_VER" "10.5.0"
if [[ $? < 1 ]]
then
DIST_BITS="32"
KEY_KEEP_ALIVE="OnDemand"
else
# Note: "OnDemand" has been deprecated and replaced from Mac OS X 10.5 by "KeepAlive"
KEY_KEEP_ALIVE="KeepAlive"
if [ "X`/usr/sbin/sysctl -n hw.cpu64bit_capable`" = "X1" ]
then
DIST_BITS="64"
else
DIST_BITS="32"
fi
fi
APP_PLIST_BASE=${PLIST_DOMAIN}.${APP_NAME}
APP_PLIST=${APP_PLIST_BASE}.plist
else
if [ "$DIST_OS" = "linux" ]
then
DIST_ARCH=
else
DIST_ARCH=`uname -p 2>/dev/null | $TR_BIN "[A-Z]" "[a-z]" | $TR_BIN -d ' '`
fi
if [ "X$DIST_ARCH" = "X" ]
then
DIST_ARCH="unknown"
fi
if [ "$DIST_ARCH" = "unknown" ]
then
DIST_ARCH=`uname -m 2>/dev/null | $TR_BIN "[A-Z]" "[a-z]" | $TR_BIN -d ' '`
fi
case "$DIST_ARCH" in
'athlon' | 'i386' | 'i486' | 'i586' | 'i686')
DIST_ARCH="x86"
if [ "${DIST_OS}" = "solaris" ] ; then
DIST_BITS=`isainfo -b`
else
DIST_BITS="32"
fi
;;
'amd64' | 'x86_64')
DIST_ARCH="x86"
DIST_BITS="64"
;;
'ia32')
DIST_ARCH="ia"
DIST_BITS="32"
;;
'ia64' | 'ia64n' | 'ia64w')
DIST_ARCH="ia"
DIST_BITS="64"
;;
'ip27')
DIST_ARCH="mips"
DIST_BITS="32"
;;
'ppc64le')
DIST_ARCH="ppcle"
DIST_BITS="64"
;;
'power' | 'powerpc' | 'power_pc' | 'ppc64')
if [ "${DIST_ARCH}" = "ppc64" ] ; then
DIST_BITS="64"
else
DIST_BITS="32"
fi
DIST_ARCH="ppcbe"
if [ "${DIST_OS}" = "aix" ] ; then
DIST_ARCH="ppc"
if [ `getconf KERNEL_BITMODE` -eq 64 ]; then
DIST_BITS="64"
else
DIST_BITS="32"
fi
fi
;;
'pa_risc' | 'pa-risc')
DIST_ARCH="parisc"
if [ `getconf KERNEL_BITS` -eq 64 ]; then
DIST_BITS="64"
else
DIST_BITS="32"
fi
;;
'sun4u' | 'sparcv9' | 'sparc')
DIST_ARCH="sparc"
DIST_BITS=`isainfo -b`
;;
'9000/800' | '9000/785')
DIST_ARCH="parisc"
if [ `getconf KERNEL_BITS` -eq 64 ]; then
DIST_BITS="64"
else
DIST_BITS="32"
fi
;;
'2064' | '2066' | '2084' | '2086' | '2094' | '2096' | '2097' | '2098' | '2817')
DIST_ARCH="390"
DIST_BITS="64"
;;
armv*)
if [ -z "`readelf -A /proc/self/exe | grep Tag_ABI_VFP_args`" ] ; then
DIST_ARCH="armel"
DIST_BITS="32"
else
DIST_ARCH="armhf"
DIST_BITS="32"
fi
;;
esac
fi
# OSX always places Java in the same location so we can reliably set JAVA_HOME
if [ "$DIST_OS" = "macosx" ]
then
if [ -z "$JAVA_HOME" ]; then
if [ -x /usr/libexec/java_home ]; then
JAVA_HOME=`/usr/libexec/java_home`; export JAVA_HOME
else
JAVA_HOME="/Library/Java/Home"; export JAVA_HOME
fi
fi
fi
# Test Echo
ECHOTEST=`echo -n "x"`
if [ "$ECHOTEST" = "x" ]
then
ECHOOPT="-n "
ECHOOPTC=""
else
ECHOOPT=""
ECHOOPTC="\c"
fi
gettext() {
"$WRAPPER_CMD" --translate "$1" "$WRAPPER_CONF" 2>/dev/null
if [ $? != 0 ] ; then
echo "$1"
fi
}
outputFile() {
if [ -f "$1" ]
then
eval echo `gettext ' $1 Found but not executable.'`;
else
echo " $1"
fi
}
# Decide on the wrapper binary to use.
# If the bits of the OS could be detected, we will try to look for the
# binary with the correct bits value. If it doesn't exist, fall back
# and look for the 32-bit binary. If that doesn't exist either then
# look for the default.
WRAPPER_TEST_CMD=""
if [ -f "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-$DIST_BITS" ]
then
WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-$DIST_BITS"
if [ ! -x "$WRAPPER_TEST_CMD" ]
then
chmod +x "$WRAPPER_TEST_CMD" 2>/dev/null
fi
if [ -x "$WRAPPER_TEST_CMD" ]
then
WRAPPER_CMD="$WRAPPER_TEST_CMD"
else
outputFile "$WRAPPER_TEST_CMD"
WRAPPER_TEST_CMD=""
fi
fi
if [ -f "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32" -a -z "$WRAPPER_TEST_CMD" ]
then
WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
if [ ! -x "$WRAPPER_TEST_CMD" ]
then
chmod +x "$WRAPPER_TEST_CMD" 2>/dev/null
fi
if [ -x "$WRAPPER_TEST_CMD" ]
then
WRAPPER_CMD="$WRAPPER_TEST_CMD"
else
outputFile "$WRAPPER_TEST_CMD"
WRAPPER_TEST_CMD=""
fi
fi
if [ -f "$WRAPPER_CMD" -a -z "$WRAPPER_TEST_CMD" ]
then
WRAPPER_TEST_CMD="$WRAPPER_CMD"
if [ ! -x "$WRAPPER_TEST_CMD" ]
then
chmod +x "$WRAPPER_TEST_CMD" 2>/dev/null
fi
if [ -x "$WRAPPER_TEST_CMD" ]
then
WRAPPER_CMD="$WRAPPER_TEST_CMD"
else
outputFile "$WRAPPER_TEST_CMD"
WRAPPER_TEST_CMD=""
fi
fi
if [ -z "$WRAPPER_TEST_CMD" ]
then
eval echo `gettext 'Unable to locate any of the following binaries:'`
outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-$DIST_BITS"
if [ ! "$DIST_BITS" = "32" ]
then
outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
fi
outputFile "$WRAPPER_CMD"
exit 1
fi
# Build the nice clause
if [ "X$PRIORITY" = "X" ]
then
CMDNICE=""
else
CMDNICE="nice -$PRIORITY"
fi
# Build the anchor file clause.
if [ "X$IGNORE_SIGNALS" = "X" ]
then
ANCHORPROP=
IGNOREPROP=
else
ANCHORPROP=wrapper.anchorfile=\"$ANCHORFILE\"
IGNOREPROP=wrapper.ignore_signals=TRUE
fi
# Build the status file clause.
if [ "X$DETAIL_STATUS$WAIT_FOR_STARTED_STATUS" = "X" ]
then
STATUSPROP=
else
STATUSPROP="wrapper.statusfile=\"$STATUSFILE\" wrapper.java.statusfile=\"$JAVASTATUSFILE\""
fi
# Build the command file clause.
if [ -n "$PAUSABLE" ]
then
COMMANDPROP="wrapper.commandfile=\"$COMMANDFILE\" wrapper.pausable=TRUE"
else
COMMANDPROP=
fi
if [ ! -n "$WAIT_FOR_STARTED_STATUS" ]
then
WAIT_FOR_STARTED_STATUS=true
fi
if [ $WAIT_FOR_STARTED_STATUS = true ] ; then
DETAIL_STATUS=true
fi
# Build the lock file clause. Only create a lock file if the lock directory exists on this platform.
LOCKPROP=
if [ -d $LOCKDIR ]
then
if [ -w $LOCKDIR ]
then
LOCKPROP=wrapper.lockfile=\"$LOCKFILE\"
fi
fi
# Build app name clause
if [ ! -n "$APP_NAME_PASS_TO_WRAPPER" ]
then
APP_NAME_PASS_TO_WRAPPER=true
fi
if [ $APP_NAME_PASS_TO_WRAPPER = false ]
then
APPNAMEPROP=
else
APPNAMEPROP="wrapper.name=\"$APP_NAME\" wrapper.displayname=\"$APP_LONG_NAME\""
fi
# Decide on run levels.
RUN_LEVEL_S_DIST_OS_TMP=`eval "echo \$\{RUN_LEVEL_S_${DIST_OS}\}"`
RUN_LEVEL_S_DIST_OS=`eval "echo ${RUN_LEVEL_S_DIST_OS_TMP}"`
if [ "X${RUN_LEVEL_S_DIST_OS}" != "X" ] ; then
APP_RUN_LEVEL_S=${RUN_LEVEL_S_DIST_OS}
elif [ "X$RUN_LEVEL_S" != "X" ] ; then
APP_RUN_LEVEL_S=$RUN_LEVEL_S
else
APP_RUN_LEVEL_S=$RUN_LEVEL
fi
APP_RUN_LEVEL_S_CHECK=`echo "$APP_RUN_LEVEL_S" | sed "s/[(0-9)*]/0/g"`
if [ "X${APP_RUN_LEVEL_S_CHECK}" != "X00" ] ; then
eval echo `gettext 'Run level \"${APP_RUN_LEVEL_S}\" must be numeric and have a length of two \(00-99\).'`
exit 1;
fi
RUN_LEVEL_K_DIST_OS_TMP=`eval "echo \$\{RUN_LEVEL_K_${DIST_OS}\}"`
RUN_LEVEL_K_DIST_OS=`eval "echo ${RUN_LEVEL_K_DIST_OS_TMP}"`
if [ "X${RUN_LEVEL_K_DIST_OS}" != "X" ] ; then
APP_RUN_LEVEL_K=${RUN_LEVEL_K_DIST_OS}
elif [ "X$RUN_LEVEL_K" != "X" ] ; then
APP_RUN_LEVEL_K=$RUN_LEVEL_K
else
APP_RUN_LEVEL_K=$RUN_LEVEL
fi
APP_RUN_LEVEL_K_CHECK=`echo "$APP_RUN_LEVEL_K" | sed "s/[(0-9)*]/0/g"`
if [ "X${APP_RUN_LEVEL_K_CHECK}" != "X00" ] ; then
eval echo `gettext 'Run level \"${APP_RUN_LEVEL_K}\" must be numeric and have a length of two \(00-99\).'`
exit 1;
fi
prepAdditionalParams() {
ADDITIONAL_PARA=""
if [ ! -n "$PASS_THROUGH" ]
then
PASS_THROUGH=false
fi
if [ $PASS_THROUGH = true ] ; then
ADDITIONAL_PARA="--"
while [ -n "$1" ] ; do
ADDITIONAL_PARA="$ADDITIONAL_PARA \"$1\""
shift
done
elif [ -n "$1" ] ; then
eval echo `gettext "WARNING: Extra arguments will be ignored. Please run \'$0 help\' for usage."`
fi
}
checkUser() {
# $1 touchLock flag
# $2.. [command] args
# Check the configured user. If necessary rerun this script as the desired user.
if [ "X$RUN_AS_USER" != "X" ]
then
# Resolve the location of the 'id' command
ID_BIN="/usr/xpg4/bin/id"
if [ ! -x "$ID_BIN" ]
then
ID_BIN="/usr/bin/id"
if [ ! -x "$ID_BIN" ]
then
eval echo `gettext 'Unable to locate "id".'`
eval echo `gettext 'Please report this message along with the location of the command on your system.'`
exit 1
fi
fi
if [ "`$ID_BIN -u -n`" = "$RUN_AS_USER" ]
then
# Already running as the configured user. Avoid password prompts by not calling su.
RUN_AS_USER=""
fi
fi
if [ "X$RUN_AS_USER" != "X" ]
then
if [ "`$ID_BIN -u -n "$RUN_AS_USER" 2>/dev/null`" != "$RUN_AS_USER" ]
then
eval echo `gettext 'User $RUN_AS_USER does not exist.'`
exit 1
fi
# If LOCKPROP and $RUN_AS_USER are defined then the new user will most likely not be
# able to create the lock file. The Wrapper will be able to update this file once it
# is created but will not be able to delete it on shutdown. If $1 is set then
# the lock file should be created for the current command
if [ "X$LOCKPROP" != "X" ]
then
if [ "X$1" != "X" ]
then
# Resolve the primary group
RUN_AS_GROUP=`groups $RUN_AS_USER | awk '{print $3}' | tail -1`
if [ "X$RUN_AS_GROUP" = "X" ]
then
RUN_AS_GROUP=$RUN_AS_USER
fi
touch $LOCKFILE
chown $RUN_AS_USER:$RUN_AS_GROUP $LOCKFILE
fi
fi
# Still want to change users, recurse. This means that the user will only be
# prompted for a password once. Variables shifted by 1
shift
# Wrap the parameters so they can be passed.
ADDITIONAL_PARA=""
while [ -n "$1" ] ; do
if [ "$1" = 'installstart' ] ; then
# At this point the service is already installed. When we will fork the process we only need to start the service.
ADDITIONAL_PARA="$ADDITIONAL_PARA \"start\""
else
ADDITIONAL_PARA="$ADDITIONAL_PARA \"$1\""
fi
shift
done
# Use "runuser" if this exists.
# runuser should be used on RedHat in preference to su.
if test -f "/sbin/runuser"
then
/sbin/runuser - $RUN_AS_USER -c "\"$REALPATH\" $ADDITIONAL_PARA"
else
$SU_BIN - $RUN_AS_USER -c "\"$REALPATH\" $ADDITIONAL_PARA" $SU_OPTS
fi
RUN_AS_USER_EXITCODE=$?
# we check if the previous command has failed
if [ $RUN_AS_USER_EXITCODE -ne 0 ]
then
if [ $RUN_AS_USER_EXITCODE -eq 1 ]
then
checkForkCommand
else
eval echo `gettext 'Error executing the requested command with user \"$RUN_AS_USER\" \(error code $RUN_AS_USER_EXITCODE\).'`
echo ""
fi
fi
# Now that we are the original user again, we may need to clean up the lock file.
if [ "X$LOCKPROP" != "X" ]
then
getpid
if [ "X$pid" = "X" ]
then
# Wrapper is not running so make sure the lock file is deleted.
if [ -f "$LOCKFILE" ]
then
rm "$LOCKFILE"
fi
fi
fi
exit $RUN_AS_USER_EXITCODE
fi
}
# Try to fork by executing a simple command.
# With this function, we want to make sure we are able to fork.
checkForkCommand() {
if test -f "/sbin/runuser"
then
/sbin/runuser - $RUN_AS_USER -c "ls \"$REALPATH\"" > /dev/null 2>&1 &
else
$SU_BIN - $RUN_AS_USER -c "ls \"$REALPATH\"" $SU_OPTS > /dev/null 2>&1 &
fi
CHECK_EXITCODE=$?
if [ $CHECK_EXITCODE -ne 0 ]
then
# clearly a problem with forking
eval echo `gettext 'Error: unable to create fork process.'`
eval echo `gettext 'Advice:'`
eval echo `gettext 'One possible cause of failure is when the user \(\"$RUN_AS_USER\"\) has no shell.'`
eval echo `gettext 'In this case, two solutions are available by editing the script file:'`
eval echo `gettext '1. Use \"SU_OPTS\" to set the shell for the user.'`
eval echo `gettext '2. Use a OS service management tool (only available on some platforms).'`
echo ""
fi
}
getpid() {
pid=""
if [ -f "$PIDFILE" ]
then
if [ -r "$PIDFILE" ]
then
pid=`cat "$PIDFILE"`
if [ "X$pid" != "X" ]
then
if [ "X$PIDFILE_CHECK_PID" != "X" ]
then
# It is possible that 'a' process with the pid exists but that it is not the
# correct process. This can happen in a number of cases, but the most
# common is during system startup after an unclean shutdown.
# The ps statement below looks for the specific wrapper command running as
# the pid. If it is not found then the pid file is considered to be stale.
case "$DIST_OS" in
'freebsd')
pidtest=`$PS_BIN -p $pid -o args | tail -1`
if [ "X$pidtest" = "XCOMMAND" ]
then
pidtest=""
fi
;;
'macosx')
pidtest=`$PS_BIN -ww -p $pid -o command | grep -F "$WRAPPER_CMD" | tail -1`
;;
'solaris')
if [ -f "/usr/bin/pargs" ]
then
pidtest=`pargs $pid | fgrep "$WRAPPER_CMD" | tail -1`
else
case "$PS_BIN" in
'/usr/ucb/ps')
pidtest=`$PS_BIN -auxww $pid | fgrep "$WRAPPER_CMD" | tail -1`
;;
'/usr/bin/ps')
TRUNCATED_CMD=`$PS_BIN -o comm -p $pid | tail -1`
COUNT=`echo $TRUNCATED_CMD | wc -m`
COUNT=`echo ${COUNT}`
COUNT=`expr $COUNT - 1`
TRUNCATED_CMD=`echo $WRAPPER_CMD | cut -c1-$COUNT`
pidtest=`$PS_BIN -o comm -p $pid | fgrep "$TRUNCATED_CMD" | tail -1`
;;
'/bin/ps')
TRUNCATED_CMD=`$PS_BIN -o comm -p $pid | tail -1`
COUNT=`echo $TRUNCATED_CMD | wc -m`
COUNT=`echo ${COUNT}`
COUNT=`expr $COUNT - 1`
TRUNCATED_CMD=`echo $WRAPPER_CMD | cut -c1-$COUNT`
pidtest=`$PS_BIN -o comm -p $pid | fgrep "$TRUNCATED_CMD" | tail -1`
;;
*)
echo "Unsupported ps command $PS_BIN"
exit 1
;;
esac
fi
;;
'hpux')
pidtest=`$PS_BIN -p $pid -x -o args | grep -F "$WRAPPER_CMD" | tail -1`
;;
'zos')
TRUNCATED_CMD=`$PS_BIN -p $pid -o args | tail -1`
COUNT=`echo $TRUNCATED_CMD | wc -m`
COUNT=`echo ${COUNT}`
COUNT=`expr $COUNT - 1`
TRUNCATED_CMD=`echo $WRAPPER_CMD | cut -c1-$COUNT`
pidtest=`$PS_BIN -p $pid -o args | grep -F "$TRUNCATED_CMD" | tail -1`
;;
*)
pidtest=`$PS_BIN -p $pid -o args | grep -F "$WRAPPER_CMD" | tail -1`
;;
esac
else
# Check to see whether the pid exists as a running process, but in this mode, don't check what that pid is.
case "$DIST_OS" in
'solaris')
case "$PS_BIN" in
'/usr/ucb/ps')
pidtest=`$PS_BIN $pid | grep "$pid" | awk '{print $1}' | tail -1`
;;
'/usr/bin/ps')
pidtest=`$PS_BIN -p $pid -o pid | grep "$pid" | tail -1`
;;
'/bin/ps')
pidtest=`$PS_BIN -p $pid -o pid | grep "$pid" | tail -1`
;;
*)
echo "Unsupported ps command $PS_BIN"
exit 1
;;
esac
;;
*)
pidtest=`$PS_BIN -p $pid -o pid | grep "$pid" | tail -1`
;;
esac
fi
if [ "X$pidtest" = "X" ]
then
# This is a stale pid file.
rm -f "$PIDFILE"
eval echo `gettext 'Removed stale pid file: $PIDFILE'`
pid=""
fi
fi
else
eval echo `gettext 'Cannot read $PIDFILE.'`
exit 1
fi
fi
}
getstatus() {
STATUS=
if [ -f "$STATUSFILE" ]
then
if [ -r "$STATUSFILE" ]
then
STATUS=`cat "$STATUSFILE"`
fi
fi
if [ "X$STATUS" = "X" ]
then
STATUS="Unknown"
fi
JAVASTATUS=
if [ -f "$JAVASTATUSFILE" ]
then
if [ -r "$JAVASTATUSFILE" ]
then
JAVASTATUS=`cat "$JAVASTATUSFILE"`
fi
fi
if [ "X$JAVASTATUS" = "X" ]
then
JAVASTATUS="Unknown"
fi
}
testpid() {
case "$DIST_OS" in
'solaris')
case "$PS_BIN" in
'/usr/ucb/ps')
pid=`$PS_BIN $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
;;
'/usr/bin/ps')
pid=`$PS_BIN -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
;;
'/bin/ps')
pid=`$PS_BIN -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
;;
*)
echo "Unsupported ps command $PS_BIN"
exit 1
;;
esac
;;
*)
pid=`$PS_BIN -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1` 2>/dev/null
;;
esac
if [ "X$pid" = "X" ]
then
pid=""
fi
}
launchdtrap() {
stopit
exit
}
waitforwrapperstop() {
getpid
while [ "X$pid" != "X" ] ; do
sleep 1
getpid
done
}
launchinternal() {
getpid
trap launchdtrap TERM
if [ "X$pid" = "X" ]
then
prepAdditionalParams "$@"
# The string passed to eval must handles spaces in paths correctly.
COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=\"$APP_NAME\" wrapper.pidfile=\"$PIDFILE\" wrapper.daemonize=TRUE $APPNAMEPROP $ANCHORPROP $IGNOREPROP $STATUSPROP $COMMANDPROP $LOCKPROP wrapper.script.version=3.5.30 $ADDITIONAL_PARA"
eval $COMMAND_LINE
else
eval echo `gettext '$APP_LONG_NAME is already running.'`
exit 1
fi
# launchd expects that this script stay up and running so we need to do our own monitoring of the Wrapper process.
if [ $WAIT_FOR_STARTED_STATUS = true ]
then
waitforwrapperstop
fi
}
console() {
eval echo `gettext 'Running $APP_LONG_NAME...'`
getpid
if [ "X$pid" = "X" ]
then
trap '' 3
prepAdditionalParams "$@"
# The string passed to eval must handles spaces in paths correctly.
COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=\"$APP_NAME\" wrapper.pidfile=\"$PIDFILE\" $APPNAMEPROP $ANCHORPROP $STATUSPROP $COMMANDPROP $LOCKPROP wrapper.script.version=3.5.30 $ADDITIONAL_PARA"
eval $COMMAND_LINE
else
eval echo `gettext '$APP_LONG_NAME is already running.'`
exit 1
fi
}
waitforjavastartup() {
getstatus
eval echo $ECHOOPT `gettext 'Waiting for $APP_LONG_NAME...$ECHOOPTC'`
# Wait until the timeout or we have something besides Unknown.
counter=15
while [ "$JAVASTATUS" = "Unknown" -a $counter -gt 0 -a -n "$JAVASTATUS" ] ; do
echo $ECHOOPT".$ECHOOPTC"
sleep 1
getstatus
counter=`expr $counter - 1`
done
if [ -n "$WAIT_FOR_STARTED_TIMEOUT" ] ; then
counter=$WAIT_FOR_STARTED_TIMEOUT
else
counter=120
fi
while [ "$JAVASTATUS" != "STARTED" -a "$JAVASTATUS" != "Unknown" -a $counter -gt 0 -a -n "$JAVASTATUS" ] ; do
echo $ECHOOPT".$ECHOOPTC"
sleep 1
getstatus
counter=`expr $counter - 1`
done
echo ""
}
startwait() {
if [ $WAIT_FOR_STARTED_STATUS = true ]
then
waitforjavastartup
fi
# Sleep for a few seconds to allow for intialization if required
# then test to make sure we're still running.
#
i=0
while [ $i -lt $WAIT_AFTER_STARTUP ]
do
sleep 1
echo $ECHOOPT".$ECHOOPTC"
i=`expr $i + 1`
done
if [ $WAIT_AFTER_STARTUP -gt 0 -o $WAIT_FOR_STARTED_STATUS = true ]
then
getpid
if [ "X$pid" = "X" ]
then
eval echo `gettext ' WARNING: $APP_LONG_NAME may have failed to start.'`
exit 1
else
eval echo `gettext ' running: PID:$pid'`
fi
else
echo ""
fi
}
mustBeRootOrExit() {
if [ `id | sed 's/^uid=//;s/(.*$//'` != "0" ] ; then
eval echo `gettext 'Must be root to perform this action.'`
exit 1
fi
}
macosxStart() {
# The daemon has been installed.
eval echo `gettext 'Starting $APP_LONG_NAME. Detected Mac OSX and installed launchd daemon.'`
mustBeRootOrExit
getpid
if [ "X$pid" != "X" ] ; then
eval echo `gettext '$APP_LONG_NAME is already running.'`
exit 1
fi
# If the daemon was just installed, it may not be loaded.
LOADED_PLIST=`launchctl list | grep ${APP_PLIST_BASE}`
if [ "X${LOADED_PLIST}" = "X" ] ; then
launchctl load /Library/LaunchDaemons/${APP_PLIST}
fi
# If launchd is set to run the daemon already at Load, we don't need to call start
getpid
if [ "X$pid" = "X" ] ; then
launchctl start ${APP_PLIST_BASE}
fi
startwait
}
macosxStop() {
# The daemon should be running.
eval echo `gettext 'Stopping $APP_LONG_NAME...'`
mustBeRootOrExit
getpid
if [ "X$pid" = "X" ] ; then
eval echo `gettext '$APP_LONG_NAME is not running.'`
exit 1
else
if [ "$MACOSX_KEEP_RUNNING" = "true" ] ; then
echo ""
eval echo `gettext 'Daemon is set to be kept continuously running and it will be automatically restarted.'`
eval echo `gettext 'To stop the daemon you need to uninstall it.'`
eval echo `gettext 'If you want to use the \"stop\" argument, you need to find MACOSX_KEEP_RUNNING'`
eval echo `gettext 'at the beginning of the script file and set it to \"false\".'`
echo ""
fi
launchctl stop ${APP_PLIST_BASE}
fi
}
macosxRestart() {
# The daemon should be running.
eval echo `gettext 'Restarting $APP_LONG_NAME...'`
mustBeRootOrExit
getpid
if [ "X$pid" = "X" ] ; then
eval echo `gettext '$APP_LONG_NAME is not running.'`
exit 1
else
if [ "$MACOSX_KEEP_RUNNING" = "true" ] ; then
# by stopping it, launchd will automatically restart it
launchctl stop ${APP_PLIST_BASE}
else
launchctl unload "/Library/LaunchDaemons/${APP_PLIST}"
sleep 1
launchctl load "/Library/LaunchDaemons/${APP_PLIST}"
fi
fi
startwait
}
upstartstart() {
# The daemon has been installed.
eval echo `gettext 'Starting $APP_LONG_NAME. Detected Linux and installed upstart.'`
mustBeRootOrExit
getpid
if [ "X$pid" != "X" ] ; then
eval echo `gettext '$APP_LONG_NAME is already running.'`
exit 1
fi
/sbin/start ${APP_NAME}
startwait
}
upstartStop() {
# The daemon has been installed.
eval echo `gettext 'Stopping $APP_LONG_NAME...'`
mustBeRootOrExit
getpid
if [ "X$pid" = "X" ] ; then
eval echo `gettext '$APP_LONG_NAME is not running.'`
exit 1
fi
/sbin/stop ${APP_NAME}
}
upstartRestart() {
# The daemon has been installed.
eval echo `gettext 'Restarting $APP_LONG_NAME...'`
mustBeRootOrExit
getpid
if [ "X$pid" = "X" ] ; then
eval echo `gettext '$APP_LONG_NAME is not running.'`
exit 1
fi
/sbin/restart ${APP_NAME}
startwait
}
systemdInstall() {
eval echo `gettext ' Installing the $APP_LONG_NAME daemon using systemd...'`
if [ -f "${REALDIR}/${APP_NAME}.service" ] ; then
eval echo `gettext ' a custom service file ${APP_NAME}.service found'`
cp "${REALDIR}/${APP_NAME}.service" "${SYSTEMD_SERVICE_FILE}"
else
eval echo `gettext ' creating default service file...'`
echo "[Unit]" > "${SYSTEMD_SERVICE_FILE}"
echo "Description=${APP_LONG_NAME}" >> "${SYSTEMD_SERVICE_FILE}"
echo "After=syslog.target" >> "${SYSTEMD_SERVICE_FILE}"
echo "" >> "${SYSTEMD_SERVICE_FILE}"
echo "[Service]" >> "${SYSTEMD_SERVICE_FILE}"
echo "Type=forking" >> "${SYSTEMD_SERVICE_FILE}"
echo "ExecStart=${REALPATH} start sysd" >> "${SYSTEMD_SERVICE_FILE}"
echo "ExecStop=${REALPATH} stop sysd" >> "${SYSTEMD_SERVICE_FILE}"
if [ "X${RUN_AS_USER}" != "X" ] ; then
echo "User=${RUN_AS_USER}" >> "${SYSTEMD_SERVICE_FILE}"
fi
echo "" >> "${SYSTEMD_SERVICE_FILE}"
echo "[Install]" >> "${SYSTEMD_SERVICE_FILE}"
echo "WantedBy=multi-user.target" >> "${SYSTEMD_SERVICE_FILE}"
fi
systemctl daemon-reload
systemctl enable "${APP_NAME}"
}
systemdStart() {
# check if the service file is present
if [ -f "${SYSTEMD_SERVICE_FILE}" ] ; then
eval echo `gettext 'Reading file ${SYSTEMD_SERVICE_FILE}'`
else
eval echo `gettext 'No service file detected. Did you install the service?'`
exit 1
fi
systemctl start $APP_NAME
if [ $? -ne 0 ] ; then
eval echo `gettext 'Failed to start service $APP_NAME'`
exit 1
fi
startwait
}
systemdStop() {
systemctl stop $APP_NAME
if [ $? -ne 0 ] ; then
eval echo `gettext 'Failed to stop service $APP_NAME'`
exit 1
fi
}
systemdRestart() {
systemctl restart $APP_NAME
if [ $? -ne 0 ] ; then
eval echo `gettext 'Failed to restart service $APP_NAME'`
exit 1
fi
startwait
}
systemdRemove() {
stopit "0"
eval echo `gettext ' Removing $APP_LONG_NAME daemon from systemd...'`
systemctl disable $APP_NAME
rm "/etc/systemd/system/${APP_NAME}.service"
systemctl daemon-reload
}
srcInstall() {
if [ "X$RUN_AS_USER" = "X" ] ; then
USERID="0"
else
USERID=`$ID_BIN -u "$RUN_AS_USER"`
if [ $? -ne 0 ] ; then
eval echo `gettext 'Failed to get user id for $RUN_AS_USER'`
exit 1
fi
fi
/usr/bin/mkssys -s "$APP_NAME" -p "$REALPATH" -a "launchdinternal" -u "$USERID" -f 9 -n 15 -S
/usr/sbin/mkitab "$APP_NAME":2:once:"/usr/bin/startsrc -s \"${APP_NAME}\" >/dev/console 2>&1"
if [ -n "$SKIP_SRC" ] ; then
eval echo `gettext 'Please do not set SKIP_SRC to be able to use SRC features.'`
fi
}
srcStart() {
startsrc -s "${APP_NAME}"
if [ $? -ne 0 ] ; then
eval echo `gettext 'Failed to start service $APP_NAME'`
exit 1
fi
startwait
}
srcStop() {
stopsrc -s "${APP_NAME}"
if [ $? -ne 0 ] ; then
eval echo `gettext 'Failed to stop service $APP_NAME'`
exit 1
fi
}
srcRestart() {
srcStop
srcStart
}
start() {
eval echo `gettext 'Starting $APP_LONG_NAME...'`
getpid
if [ "X$pid" = "X" ]
then
prepAdditionalParams "$@"
# The string passed to eval must handles spaces in paths correctly.
COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=\"$APP_NAME\" wrapper.pidfile=\"$PIDFILE\" wrapper.daemonize=TRUE $APPNAMEPROP $ANCHORPROP $IGNOREPROP $STATUSPROP $COMMANDPROP $LOCKPROP wrapper.script.version=3.5.30 $ADDITIONAL_PARA"
eval $COMMAND_LINE
else
eval echo `gettext '$APP_LONG_NAME is already running.'`
exit 1
fi
startwait
}
stopit() {
# $1 exit if down flag
eval echo `gettext 'Stopping $APP_LONG_NAME...'`
getpid
if [ "X$pid" = "X" ]
then
eval echo `gettext '$APP_LONG_NAME was not running.'`
if [ "X$1" = "X1" ]
then
exit 1
fi
else
if [ "X$IGNORE_SIGNALS" = "X" ]
then
# Running so try to stop it.
kill $pid
if [ $? -ne 0 ]
then
# An explanation for the failure should have been given
eval echo `gettext 'Unable to stop $APP_LONG_NAME.'`
exit 1
fi
else
rm -f "$ANCHORFILE"
if [ -f "$ANCHORFILE" ]
then
# An explanation for the failure should have been given
eval echo `gettext 'Unable to stop $APP_LONG_NAME.'`
exit 1
fi
fi
# We can not predict how long it will take for the wrapper to
# actually stop as it depends on settings in wrapper.conf.
# Loop until it does.
savepid=$pid
CNT=0
TOTCNT=0
while [ "X$pid" != "X" ]
do
# Show a waiting message every 5 seconds.
if [ "$CNT" -lt "5" ]
then
CNT=`expr $CNT + 1`
else
eval echo `gettext 'Waiting for $APP_LONG_NAME to exit...'`
CNT=0
fi
TOTCNT=`expr $TOTCNT + 1`
sleep 1
# Check if the process is still running.
testpid
if [ "X$pid" = "X" ]
then
# The process is gone, but it is possible that another instance restarted while we waited...
SAVE_PIDFILE_CHECK_PID=$PIDFILE_CHECK_PID
PIDFILE_CHECK_PID=""
getpid
PIDFILE_CHECK_PID=$SAVE_PIDFILE_CHECK_PID
if [ "X$pid" != "X" ]
then
# Another process is running.
if [ "$pid" = "$savepid" ]
then
# This should never happen, unless the PID was recycled?
eval echo `gettext 'Failed to stop $APP_LONG_NAME.'`
exit 1
else
eval echo `gettext 'The content of $PIDFILE has changed.'`
eval echo `gettext 'Another instance of the Wrapper might have started in the meantime.'`
# Exit now. Any further actions might compromise the running instance.
exit 1
fi
fi
fi
done
eval echo `gettext 'Stopped $APP_LONG_NAME.'`
fi
}
pause() {
eval echo `gettext 'Pausing $APP_LONG_NAME.'`
}
resume() {
eval echo `gettext 'Resuming $APP_LONG_NAME.'`
}
checkInstalled() {
if [ "$DIST_OS" = "solaris" ] ; then
if [ -f "/etc/init.d/$APP_NAME" -o -L "/etc/init.d/$APP_NAME" ] ; then
installedStatus=1
else
installedStatus=0
fi
elif [ "$DIST_OS" = "linux" ] ; then
if [ -f /etc/redhat-release -o -f /etc/redhat_version -o -f /etc/fedora-release ] ; then
if [ -f "/etc/init.d/$APP_NAME" -o -L "/etc/init.d/$APP_NAME" ] ; then
installedStatus=1
installedWith="init.d"
elif [ -n "$USE_SYSTEMD" -a -f "${SYSTEMD_SERVICE_FILE}" ] ; then
installedStatus=2
installedWith="systemd"
elif [ -f "/etc/init/${APP_NAME}.conf" ] ; then
installedStatus=3
installedWith="upstart"
else
installedStatus=0
fi
elif [ -f /etc/SuSE-release ] ; then
if [ -f "/etc/init.d/$APP_NAME" -o -L "/etc/init.d/$APP_NAME" ] ; then
installedStatus=1
installedWith="init.d"
elif [ -n "$USE_SYSTEMD" -a -f "${SYSTEMD_SERVICE_FILE}" ] ; then
installedStatus=2
installedWith="systemd"
else
installedStatus=0
fi
elif [ -f /etc/lsb-release -o -f /etc/debian_version -o -f /etc/debian_release ] ; then
if [ -f "/etc/init.d/$APP_NAME" -o -L "/etc/init.d/$APP_NAME" ] ; then
installedStatus=1
installedWith="init.d"
elif [ -n "$USE_SYSTEMD" -a -f "${SYSTEMD_SERVICE_FILE}" ] ; then
installedStatus=2
installedWith="systemd"
elif [ -f "/etc/init/${APP_NAME}.conf" ] ; then
installedStatus=3
installedWith="upstart"
else
installedStatus=0
fi
else
if [ -f "/etc/init.d/$APP_NAME" -o -L "/etc/init.d/$APP_NAME" ] ; then
installedStatus=1
else
installedStatus=0
fi
fi
elif [ "$DIST_OS" = "hpux" ] ; then
if [ -f "/sbin/init.d/$APP_NAME" -o -L "/sbin/init.d/$APP_NAME" ] ; then
installedStatus=1
else
installedStatus=0
fi
elif [ "$DIST_OS" = "aix" ] ; then
validateAppNameLength
if [ -f "/etc/rc.d/init.d/$APP_NAME" -o -L "/etc/rc.d/init.d/$APP_NAME" ] ; then
installedStatus=1
installedWith="rc.d"
elif [ -n "`/usr/sbin/lsitab $APP_NAME`" -a -n "`/usr/bin/lssrc -S -s $APP_NAME`" ] ; then
installedStatus=4
installedWith="SRC"
elif [ -n "`/usr/sbin/lsitab $APP_NAME`" -o -n "`/usr/bin/lssrc -S -s $APP_NAME`" ] ; then
installedStatus=5
installedWith="SRC"
else
installedStatus=0
fi
elif [ "$DIST_OS" = "freebsd" ] ; then
if [ -f "/etc/rc.d/$APP_NAME" -o -L "/etc/rc.d/$APP_NAME" ] ; then
installedStatus=1
else
installedStatus=0
fi
elif [ "$DIST_OS" = "macosx" ] ; then
if [ -f "/Library/LaunchDaemons/${APP_PLIST}" -o -L "/Library/LaunchDaemons/${APP_PLIST}" ] ; then
installedStatus=1
else
installedStatus=0
fi
elif [ "$DIST_OS" = "zos" ] ; then
if [ -f /etc/rc.bak ] ; then
installedStatus=1
else
installedStatus=0
fi
fi
}
status() {
checkInstalled
getpid
if [ "X$pid" = "X" ]
then
if [ $installedStatus -eq 0 ] ; then
eval echo `gettext '$APP_LONG_NAME \(not installed\) is not running.'`
elif [ "X$installedWith" = "X" ] ; then
eval echo `gettext '$APP_LONG_NAME \(installed\) is not running.'`
else
eval echo `gettext '$APP_LONG_NAME \(installed with $installedWith\) is not running.'`
fi
exit 1
else
if [ "X$DETAIL_STATUS" = "X" ]
then
if [ $installedStatus -eq 0 ] ; then
eval echo `gettext '$APP_LONG_NAME \(not installed\) is running: PID:$pid'`
elif [ "X$installedWith" = "X" ] ; then
eval echo `gettext '$APP_LONG_NAME \(installed\) is running: PID:$pid'`
else
eval echo `gettext '$APP_LONG_NAME \(installed with $installedWith\) is running: PID:$pid'`
fi
else
getstatus
if [ $installedStatus -eq 0 ] ; then
eval echo `gettext '$APP_LONG_NAME \(not installed\) is running: PID:$pid, Wrapper:$STATUS, Java:$JAVASTATUS'`
elif [ "X$installedWith" = "X" ] ; then
eval echo `gettext '$APP_LONG_NAME \(installed\) is running: PID:$pid, Wrapper:$STATUS, Java:$JAVASTATUS'`
else
eval echo `gettext '$APP_LONG_NAME \(installed with $installedWith\) is running: PID:$pid, Wrapper:$STATUS, Java:$JAVASTATUS'`
fi
fi
exit 0
fi
}
# Make sure APP_NAME is less than 14 characters, otherwise in AIX, the commands
# "lsitab" or "lssrc" will fail
validateAppNameLength() {
if [ ${#APP_NAME} -gt 14 ] ; then
eval echo `gettext ' APP_NAME must be less than 14 characters long. Length of ${APP_NAME} is ${#APP_NAME}.'`
exit 1
fi
}
installUpstart() {
eval echo `gettext ' Installing the $APP_LONG_NAME daemon using upstart..'`
if [ -f "${REALDIR}/${APP_NAME}.install" ] ; then
eval echo `gettext ' a custom upstart conf file ${APP_NAME}.install found'`
cp "${REALDIR}/${APP_NAME}.install" "/etc/init/${APP_NAME}.conf"
else
eval echo `gettext ' creating default upstart conf file..'`
echo "# ${APP_NAME} - ${APP_LONG_NAME}" > "/etc/init/${APP_NAME}.conf"
echo "description \"${APP_LONG_NAME}\"" >> "/etc/init/${APP_NAME}.conf"
echo "author \"Tanuki Software Ltd. \"" >> "/etc/init/${APP_NAME}.conf"
echo "start on runlevel [2345]" >> "/etc/init/${APP_NAME}.conf"
echo "stop on runlevel [!2345]" >> "/etc/init/${APP_NAME}.conf"
echo "env LANG=${LANG}" >> "/etc/init/${APP_NAME}.conf"
echo "exec \"${REALPATH}\" upstartinternal" >> "/etc/init/${APP_NAME}.conf"
fi
}
installdaemon() {
mustBeRootOrExit
checkInstalled
APP_NAME_LOWER=`echo "$APP_NAME" | $TR_BIN "[A-Z]" "[a-z]"`
if [ "$DIST_OS" = "solaris" ] ; then
eval echo `gettext 'Detected Solaris:'`
if [ $installedStatus -gt 0 ] ; then
eval echo `gettext ' The $APP_LONG_NAME daemon is already installed.'`
else
eval echo `gettext ' Installing the $APP_LONG_NAME daemon..'`
ln -s "$REALPATH" "/etc/init.d/$APP_NAME"
for i in `ls "/etc/rc3.d/K"??"$APP_NAME_LOWER" "/etc/rc3.d/S"??"$APP_NAME_LOWER" 2>/dev/null` ; do
eval echo `gettext ' Removing unexpected file before proceeding: $i'`
rm -f $i
done
ln -s "/etc/init.d/$APP_NAME" "/etc/rc3.d/K${APP_RUN_LEVEL_K}$APP_NAME_LOWER"
ln -s "/etc/init.d/$APP_NAME" "/etc/rc3.d/S${APP_RUN_LEVEL_S}$APP_NAME_LOWER"
fi
elif [ "$DIST_OS" = "linux" ] ; then
if [ -f /etc/redhat-release -o -f /etc/redhat_version -o -f /etc/fedora-release ] ; then
eval echo `gettext 'Detected RHEL or Fedora:'`
if [ $installedStatus -gt 0 ] ; then
eval echo `gettext ' The $APP_LONG_NAME daemon is already installed with $installedWith.'`
elif [ -n "$USE_SYSTEMD" -a -d "/etc/systemd" ] ; then
systemdInstall
else
if [ -n "$USE_UPSTART" -a -d "/etc/init" ] ; then
installUpstart
else
eval echo `gettext ' Installing the $APP_LONG_NAME daemon..'`
ln -s "$REALPATH" "/etc/init.d/$APP_NAME"
/sbin/chkconfig --add "$APP_NAME"
/sbin/chkconfig "$APP_NAME" on
fi
fi
elif [ -f /etc/SuSE-release ] ; then
eval echo `gettext 'Detected SuSE or SLES:'`
if [ $installedStatus -gt 0 ] ; then
eval echo `gettext ' The $APP_LONG_NAME daemon is already installed with $installedWith.'`
elif [ -n "$USE_SYSTEMD" -a -d "/etc/systemd" ] ; then
systemdInstall
else
eval echo `gettext ' Installing the $APP_LONG_NAME daemon..'`
ln -s "$REALPATH" "/etc/init.d/$APP_NAME"
insserv "/etc/init.d/$APP_NAME"
fi
elif [ -f /etc/lsb-release -o -f /etc/debian_version -o -f /etc/debian_release ] ; then
eval echo `gettext 'Detected Ubuntu or Debian:'`
if [ $installedStatus -gt 0 ] ; then
eval echo `gettext ' The $APP_LONG_NAME daemon is already installed with $installedWith.'`
else
if [ -n "$USE_SYSTEMD" -a -d "/etc/systemd" ] ; then
systemdInstall
elif [ -n "$USE_UPSTART" -a -d "/etc/init" ] ; then
installUpstart
else
eval echo `gettext ' Installing the $APP_LONG_NAME daemon using init.d..'`
ln -s "$REALPATH" "/etc/init.d/$APP_NAME"
update-rc.d "$APP_NAME" defaults
fi
fi
else
eval echo `gettext 'Detected Linux:'`
if [ $installedStatus -gt 0 ] ; then
eval echo `gettext ' The $APP_LONG_NAME daemon is already installed.'`
else
eval echo `gettext ' Installing the $APP_LONG_NAME daemon..'`
ln -s "$REALPATH" /etc/init.d/$APP_NAME
for i in `ls "/etc/rc3.d/K"??"$APP_NAME_LOWER" "/etc/rc5.d/K"??"$APP_NAME_LOWER" "/etc/rc3.d/S"??"$APP_NAME_LOWER" "/etc/rc5.d/S"??"$APP_NAME_LOWER" 2>/dev/null` ; do
eval echo `gettext ' Removing unexpected file before proceeding: $i'`
rm -f $i
done
ln -s "/etc/init.d/$APP_NAME" "/etc/rc3.d/K${APP_RUN_LEVEL_K}$APP_NAME_LOWER"
ln -s "/etc/init.d/$APP_NAME" "/etc/rc3.d/S${APP_RUN_LEVEL_S}$APP_NAME_LOWER"
ln -s "/etc/init.d/$APP_NAME" "/etc/rc5.d/S${APP_RUN_LEVEL_S}$APP_NAME_LOWER"
ln -s "/etc/init.d/$APP_NAME" "/etc/rc5.d/K${APP_RUN_LEVEL_K}$APP_NAME_LOWER"
fi
fi
elif [ "$DIST_OS" = "hpux" ] ; then
eval echo `gettext 'Detected HP-UX:'`
if [ $installedStatus -gt 0 ] ; then
eval echo `gettext ' The $APP_LONG_NAME daemon is already installed.'`
else
eval echo `gettext ' Installing the $APP_LONG_NAME daemon..'`
ln -s "$REALPATH" "/sbin/init.d/$APP_NAME"
for i in `ls "/sbin/rc3.d/K"??"$APP_NAME_LOWER" "/sbin/rc3.d/S"??"$APP_NAME_LOWER" 2>/dev/null` ; do
eval echo `gettext ' Removing unexpected file before proceeding: $i'`
rm -f $i
done
ln -s "/sbin/init.d/$APP_NAME" "/sbin/rc3.d/K${APP_RUN_LEVEL_K}$APP_NAME_LOWER"
ln -s "/sbin/init.d/$APP_NAME" "/sbin/rc3.d/S${APP_RUN_LEVEL_S}$APP_NAME_LOWER"
fi
elif [ "$DIST_OS" = "aix" ] ; then
eval echo `gettext 'Detected AIX:'`
validateAppNameLength
if [ $installedStatus -eq 1 -o $installedStatus -eq 4 ] ; then
eval echo `gettext ' The $APP_LONG_NAME daemon is already installed with $installedWith.'`
else
eval echo `gettext ' Installing the $APP_LONG_NAME daemon..'`
if [ -n "`/usr/sbin/lsitab install_assist`" ] ; then
eval echo `gettext ' The task /usr/sbin/install_assist was found in the inittab, this might cause problems for all subsequent tasks to launch at this process is known to block the init task. Please make sure this task is not needed anymore and remove/deactivate it.'`
fi
for i in `ls "/etc/rc.d/rc2.d/K"??"$APP_NAME_LOWER" "/etc/rc.d/rc2.d/S"??"$APP_NAME_LOWER" 2>/dev/null` ; do
eval echo `gettext ' Removing unexpected file before proceeding: $i'`
rm -f $i
done
srcInstall
fi
elif [ "$DIST_OS" = "freebsd" ] ; then
eval echo `gettext 'Detected FreeBSD:'`
if [ $installedStatus -gt 0 ] ; then
eval echo `gettext ' The $APP_LONG_NAME daemon is already installed.'`
else
eval echo `gettext ' Installing the $APP_LONG_NAME daemon..'`
sed -i .bak "/${APP_NAME}_enable=\"YES\"/d" /etc/rc.conf
if [ -f "${REALDIR}/${APP_NAME}.install" ] ; then
ln -s "${REALDIR}/${APP_NAME}.install" "/etc/rc.d/$APP_NAME"
else
echo '#!/bin/sh' > "/etc/rc.d/$APP_NAME"
echo "#" >> "/etc/rc.d/$APP_NAME"
echo "# PROVIDE: $APP_NAME" >> "/etc/rc.d/$APP_NAME"
echo "# REQUIRE: NETWORKING" >> "/etc/rc.d/$APP_NAME"
echo "# KEYWORD: shutdown" >> "/etc/rc.d/$APP_NAME"
echo ". /etc/rc.subr" >> "/etc/rc.d/$APP_NAME"
echo "name=\"$APP_NAME\"" >> "/etc/rc.d/$APP_NAME"
echo "rcvar=\`set_rcvar\`" >> "/etc/rc.d/$APP_NAME"
echo "command=\"${REALPATH}\"" >> "/etc/rc.d/$APP_NAME"
echo 'start_cmd="${name}_start"' >> "/etc/rc.d/$APP_NAME"
echo 'load_rc_config $name' >> "/etc/rc.d/$APP_NAME"
echo 'status_cmd="${name}_status"' >> "/etc/rc.d/$APP_NAME"
echo 'stop_cmd="${name}_stop"' >> "/etc/rc.d/$APP_NAME"
echo "${APP_NAME}_status() {" >> "/etc/rc.d/$APP_NAME"
echo '${command} status' >> "/etc/rc.d/$APP_NAME"
echo '}' >> "/etc/rc.d/$APP_NAME"
echo "${APP_NAME}_stop() {" >> "/etc/rc.d/$APP_NAME"
echo '${command} stop' >> "/etc/rc.d/$APP_NAME"
echo '}' >> "/etc/rc.d/$APP_NAME"
echo "${APP_NAME}_start() {" >> "/etc/rc.d/$APP_NAME"
echo '${command} start' >> "/etc/rc.d/$APP_NAME"
echo '}' >> "/etc/rc.d/$APP_NAME"
echo 'run_rc_command "$1"' >> "/etc/rc.d/$APP_NAME"
fi
echo "${APP_NAME}_enable=\"YES\"" >> /etc/rc.conf
chmod 555 "/etc/rc.d/$APP_NAME"
fi
elif [ "$DIST_OS" = "macosx" ] ; then
eval echo `gettext 'Detected Mac OSX:'`
if [ $installedStatus -gt 0 ] ; then
eval echo `gettext ' The $APP_LONG_NAME daemon is already installed.'`
else
eval echo `gettext ' Installing the $APP_LONG_NAME daemon..'`
if [ -f "${REALDIR}/${APP_PLIST}" ] ; then
ln -s "${REALDIR}/${APP_PLIST}" "/Library/LaunchDaemons/${APP_PLIST}"
else
echo "" > "/Library/LaunchDaemons/${APP_PLIST}"
echo "> "/Library/LaunchDaemons/${APP_PLIST}"
echo "\"http://www.apple.com/DTDs/PropertyList-1.0.dtd\">" >> "/Library/LaunchDaemons/${APP_PLIST}"
echo "" >> "/Library/LaunchDaemons/${APP_PLIST}"
echo " " >> "/Library/LaunchDaemons/${APP_PLIST}"
echo " Label " >> "/Library/LaunchDaemons/${APP_PLIST}"
echo " ${APP_PLIST_BASE} " >> "/Library/LaunchDaemons/${APP_PLIST}"
echo " ProgramArguments " >> "/Library/LaunchDaemons/${APP_PLIST}"
echo " " >> "/Library/LaunchDaemons/${APP_PLIST}"
echo " ${REALPATH} " >> "/Library/LaunchDaemons/${APP_PLIST}"
echo " launchdinternal " >> "/Library/LaunchDaemons/${APP_PLIST}"
echo " " >> "/Library/LaunchDaemons/${APP_PLIST}"
echo " ${KEY_KEEP_ALIVE} " >> "/Library/LaunchDaemons/${APP_PLIST}"
echo " <${MACOSX_KEEP_RUNNING}/>" >> "/Library/LaunchDaemons/${APP_PLIST}"
echo " RunAtLoad " >> "/Library/LaunchDaemons/${APP_PLIST}"
echo " UserName " >> "/Library/LaunchDaemons/${APP_PLIST}"
echo " ${RUN_AS_USER} " >> "/Library/LaunchDaemons/${APP_PLIST}"
fi
echo " " >> "/Library/LaunchDaemons/${APP_PLIST}"
echo " " >> "/Library/LaunchDaemons/${APP_PLIST}"
fi
chmod 555 "/Library/LaunchDaemons/${APP_PLIST}"
fi
elif [ "$DIST_OS" = "zos" ] ; then
eval echo `gettext 'Detected z/OS:'`
if [ $installedStatus -gt 0 ] ; then
eval echo `gettext ' The $APP_LONG_NAME daemon is already installed.'`
else
eval echo `gettext ' Installing the $APP_LONG_NAME daemon..'`
cp /etc/rc /etc/rc.bak
sed "s:echo /etc/rc script executed, \`date\`::g" /etc/rc.bak > /etc/rc
echo "_BPX_JOBNAME='${APP_NAME}' \"${REALDIR}/${APP_NAME}\" start" >>/etc/rc
echo '/etc/rc script executed, `date`' >>/etc/rc
fi
else
eval echo `gettext 'Install not currently supported for $DIST_OS'`
exit 1
fi
if [ $installedStatus -gt 0 -a "$COMMAND" != 'installstart' ] ; then
exit 1
fi
}
startdaemon() {
if [ "$DIST_OS" = "macosx" -a -f "/Library/LaunchDaemons/${APP_PLIST}" ] ; then
macosxStart
elif [ "$DIST_OS" = "linux" -a -f "/etc/init/${APP_NAME}.conf" ] ; then
upstartstart
elif [ "$DIST_OS" = "linux" -a -n "$USE_SYSTEMD" -a -z "$SYSD" ] ; then
systemdStart
elif [ "$DIST_OS" = "aix" -a -z "$SKIP_SRC" ] && [ -n "`/usr/bin/lssrc -S -s $APP_NAME`" ] ; then
srcStart
else
if [ -n "$SYSD" ] ; then
shift
fi
checkUser touchlock "$@"
if [ ! -n "$FIXED_COMMAND" ] ; then
shift
fi
start "$@"
fi
}
removedaemon() {
mustBeRootOrExit
checkInstalled
APP_NAME_LOWER=`echo "$APP_NAME" | $TR_BIN "[A-Z]" "[a-z]"`
if [ "$DIST_OS" = "solaris" ] ; then
eval echo `gettext 'Detected Solaris:'`
if [ $installedStatus -eq 1 ] ; then
stopit "0"
eval echo `gettext ' Removing $APP_LONG_NAME daemon...'`
for i in `ls "/etc/rc3.d/K"??"$APP_NAME_LOWER" "/etc/rc3.d/S"??"$APP_NAME_LOWER" "/etc/init.d/$APP_NAME" 2>/dev/null` ; do
rm -f $i
done
else
eval echo `gettext ' The $APP_LONG_NAME daemon is not currently installed.'`
exit 1
fi
elif [ "$DIST_OS" = "linux" ] ; then
if [ -f /etc/redhat-release -o -f /etc/redhat_version -o -f /etc/fedora-release ] ; then
eval echo `gettext 'Detected RHEL or Fedora:'`
if [ $installedStatus -eq 1 ] ; then
stopit "0"
eval echo `gettext ' Removing $APP_LONG_NAME daemon...'`
/sbin/chkconfig "$APP_NAME" off
/sbin/chkconfig --del "$APP_NAME"
rm -f "/etc/init.d/$APP_NAME"
elif [ $installedStatus -eq 2 ] ; then
systemdRemove
elif [ $installedStatus -eq 3 ] ; then
stopit "0"
eval echo `gettext ' Removing $APP_LONG_NAME daemon from upstart...'`
rm "/etc/init/${APP_NAME}.conf"
else
eval echo `gettext ' The $APP_LONG_NAME daemon is not currently installed.'`
exit 1
fi
elif [ -f /etc/SuSE-release ] ; then
eval echo `gettext 'Detected SuSE or SLES:'`
if [ $installedStatus -eq 1 ] ; then
stopit "0"
eval echo `gettext ' Removing $APP_LONG_NAME daemon...'`
insserv -r "/etc/init.d/$APP_NAME"
rm -f "/etc/init.d/$APP_NAME"
elif [ $installedStatus -eq 2 ] ; then
systemdRemove
else
eval echo `gettext ' The $APP_LONG_NAME daemon is not currently installed.'`
exit 1
fi
elif [ -f /etc/lsb-release -o -f /etc/debian_version -o -f /etc/debian_release ] ; then
eval echo `gettext 'Detected Ubuntu or Debian:'`
if [ $installedStatus -eq 1 ] ; then
stopit "0"
eval echo `gettext ' Removing $APP_LONG_NAME daemon from init.d...'`
update-rc.d -f "$APP_NAME" remove
rm -f "/etc/init.d/$APP_NAME"
elif [ $installedStatus -eq 2 ] ; then
systemdRemove
elif [ $installedStatus -eq 3 ] ; then
stopit "0"
eval echo `gettext ' Removing $APP_LONG_NAME daemon from upstart...'`
rm "/etc/init/${APP_NAME}.conf"
else
eval echo `gettext ' The $APP_LONG_NAME daemon is not currently installed.'`
exit 1
fi
else
eval echo `gettext 'Detected Linux:'`
if [ $installedStatus -eq 1 ] ; then
stopit "0"
eval echo `gettext ' Removing $APP_LONG_NAME daemon...'`
for i in `ls "/etc/rc3.d/K"??"$APP_NAME_LOWER" "/etc/rc5.d/K"??"$APP_NAME_LOWER" "/etc/rc3.d/S"??"$APP_NAME_LOWER" "/etc/rc5.d/S"??"$APP_NAME_LOWER" "/etc/init.d/$APP_NAME" 2>/dev/null` ; do
rm -f $i
done
else
eval echo `gettext ' The $APP_LONG_NAME daemon is not currently installed.'`
exit 1
fi
fi
elif [ "$DIST_OS" = "hpux" ] ; then
eval echo `gettext 'Detected HP-UX:'`
if [ $installedStatus -eq 1 ] ; then
stopit "0"
eval echo `gettext ' Removing $APP_LONG_NAME daemon...'`
for i in `ls "/sbin/rc3.d/K"??"$APP_NAME_LOWER" "/sbin/rc3.d/S"??"$APP_NAME_LOWER" "/sbin/init.d/$APP_NAME" 2>/dev/null` ; do
rm -f $i
done
else
eval echo `gettext ' The $APP_LONG_NAME daemon is not currently installed.'`
exit 1
fi
elif [ "$DIST_OS" = "aix" ] ; then
eval echo `gettext 'Detected AIX:'`
validateAppNameLength
if [ $installedStatus -gt 0 ] ; then
stopit "0"
eval echo `gettext ' Removing $APP_LONG_NAME daemon...'`
if [ $installedStatus -eq 1 ] ; then
for i in `ls "/etc/rc.d/rc2.d/K"??"$APP_NAME_LOWER" "/etc/rc.d/rc2.d/S"??"$APP_NAME_LOWER" "/etc/rc.d/init.d/$APP_NAME" 2>/dev/null` ; do
rm -f $i
done
else
/usr/sbin/rmitab $APP_NAME
/usr/bin/rmssys -s $APP_NAME
fi
else
eval echo `gettext ' The $APP_LONG_NAME daemon is not currently installed.'`
exit 1
fi
elif [ "$DIST_OS" = "freebsd" ] ; then
eval echo `gettext 'Detected FreeBSD:'`
if [ -f "/etc/rc.d/$APP_NAME" -o -L "/etc/rc.d/$APP_NAME" ] ; then
stopit "0"
eval echo `gettext ' Removing $APP_LONG_NAME daemon...'`
for i in "/etc/rc.d/$APP_NAME"
do
rm -f $i
done
sed -i .bak "/${APP_NAME}_enable=\"YES\"/d" /etc/rc.conf
else
eval echo `gettext ' The $APP_LONG_NAME daemon is not currently installed.'`
exit 1
fi
elif [ "$DIST_OS" = "macosx" ] ; then
eval echo `gettext 'Detected Mac OSX:'`
if [ -f "/Library/LaunchDaemons/${APP_PLIST}" -o -L "/Library/LaunchDaemons/${APP_PLIST}" ] ; then
stopit "0"
eval echo `gettext ' Removing $APP_LONG_NAME daemon...'`
# Make sure the plist is installed
LOADED_PLIST=`launchctl list | grep ${APP_PLIST_BASE}`
if [ "X${LOADED_PLIST}" != "X" ] ; then
launchctl unload "/Library/LaunchDaemons/${APP_PLIST}"
fi
rm -f "/Library/LaunchDaemons/${APP_PLIST}"
else
eval echo `gettext ' The $APP_LONG_NAME daemon is not currently installed.'`
exit 1
fi
elif [ "$DIST_OS" = "zos" ] ; then
eval echo `gettext 'Detected z/OS:'`
if [ -f /etc/rc.bak ] ; then
stopit "0"
eval echo `gettext ' Removing $APP_LONG_NAME daemon...'`
cp /etc/rc /etc/rc.bak
sed "s/_BPX_JOBNAME=\'APP_NAME\'.*//g" /etc/rc.bak > /etc/rc
rm /etc/rc.bak
else
eval echo `gettext ' The $APP_LONG_NAME daemon is not currently installed.'`
exit 1
fi
else
eval echo `gettext 'Remove not currently supported for $DIST_OS'`
exit 1
fi
}
dump() {
eval echo `gettext 'Dumping $APP_LONG_NAME...'`
getpid
if [ "X$pid" = "X" ]
then
eval echo `gettext '$APP_LONG_NAME was not running.'`
else
kill -3 $pid
if [ $? -ne 0 ]
then
eval echo `gettext 'Failed to dump $APP_LONG_NAME.'`
exit 1
else
eval echo `gettext 'Dumped $APP_LONG_NAME.'`
fi
fi
}
# Used by HP-UX init scripts.
startmsg() {
getpid
if [ "X$pid" = "X" ]
then
eval echo `gettext 'Starting $APP_LONG_NAME... Wrapper:Stopped'`
else
if [ "X$DETAIL_STATUS" = "X" ]
then
eval echo `gettext 'Starting $APP_LONG_NAME... Wrapper:Running'`
else
getstatus
eval echo `gettext 'Starting $APP_LONG_NAME... Wrapper:$STATUS, Java:$JAVASTATUS'`
fi
fi
}
# Used by HP-UX init scripts.
stopmsg() {
getpid
if [ "X$pid" = "X" ]
then
eval echo `gettext 'Stopping $APP_LONG_NAME... Wrapper:Stopped'`
else
if [ "X$DETAIL_STATUS" = "X" ]
then
eval echo `gettext 'Stopping $APP_LONG_NAME... Wrapper:Running'`
else
getstatus
eval echo `gettext 'Stopping $APP_LONG_NAME... Wrapper:$STATUS, Java:$JAVASTATUS'`
fi
fi
}
# 'source' files
sourceFiles() {
if [ -n "$FILES_TO_SOURCE" ] ; then
OIFS=$IFS
IFS=';'
files=$FILES_TO_SOURCE
for file in $files
do
. $file
done
IFS=$OIFS
fi
}
showUsage() {
# $1 bad command
if [ -n "$1" ]
then
eval echo `gettext 'Unexpected command: $1'`
echo "";
fi
eval MSG=`gettext 'Usage: '`
if [ -n "$FIXED_COMMAND" ] ; then
if [ -n "$PASS_THROUGH" ] ; then
echo "${MSG} $0 {JavaAppArgs}"
else
echo "${MSG} $0"
fi
else
if [ -n "$PAUSABLE" ] ; then
if [ -n "$PASS_THROUGH" ] ; then
echo "${MSG} $0 [ console {JavaAppArgs} | start {JavaAppArgs} | stop | restart {JavaAppArgs} | condrestart {JavaAppArgs} | pause | resume | status | install | installstart | remove | dump ]"
else
echo "${MSG} $0 [ console | start | stop | restart | condrestart | pause | resume | status | install | installstart | remove | dump ]"
fi
else
if [ -n "$PASS_THROUGH" ] ; then
echo "${MSG} $0 [ console {JavaAppArgs} | start {JavaAppArgs} | stop | restart {JavaAppArgs} | condrestart {JavaAppArgs} | status | install | installstart | remove | dump ]"
else
echo "${MSG} $0 [ console | start | stop | restart | condrestart | status | install | installstart | remove | dump ]"
fi
fi
fi
if [ ! -n "$BRIEF_USAGE" ]
then
echo "";
if [ ! -n "$FIXED_COMMAND" ] ; then
echo "`gettext 'Commands:'`"
echo "`gettext ' console Launch in the current console.'`"
echo "`gettext ' start Start in the background as a daemon process.'`"
echo "`gettext ' stop Stop if running as a daemon or in another console.'`"
echo "`gettext ' restart Stop if running and then start.'`"
echo "`gettext ' condrestart Restart only if already running.'`"
if [ -n "$PAUSABLE" ] ; then
echo "`gettext ' pause Pause if running.'`"
echo "`gettext ' resume Resume if paused.'`"
fi
echo "`gettext ' status Query the current status.'`"
echo "`gettext ' install Install to start automatically when system boots.'`"
echo "`gettext ' installstart Install and start running as a daemon process.'`"
echo "`gettext ' remove Uninstall.'`"
echo "`gettext ' dump Request a Java thread dump if running.'`"
echo "";
fi
if [ -n "$PASS_THROUGH" ] ; then
echo "`gettext 'JavaAppArgs: Zero or more arguments which will be passed to the Java application.'`"
echo "";
fi
fi
exit 1
}
docommand() {
case "$COMMAND" in
'console')
checkUser touchlock "$@"
if [ ! -n "$FIXED_COMMAND" ] ; then
shift
fi
console "$@"
;;
'start')
startdaemon "$@"
;;
'stop')
if [ "$DIST_OS" = "macosx" -a -f "/Library/LaunchDaemons/${APP_PLIST}" ] ; then
macosxStop
elif [ "$DIST_OS" = "linux" -a -f "/etc/init/${APP_NAME}.conf" ] ; then
upstartStop
elif [ "$DIST_OS" = "linux" -a -n "$USE_SYSTEMD" -a -z "$SYSD" ] ; then
systemdStop
elif [ "$DIST_OS" = "aix" -a -z "$SKIP_SRC" ] && [ "`/usr/bin/lssrc -S -s $APP_NAME`" ] ; then
srcStop
else
checkUser "" "$COMMAND"
stopit "0"
fi
;;
'restart')
if [ "$DIST_OS" = "macosx" -a -f "/Library/LaunchDaemons/${APP_PLIST}" ] ; then
macosxRestart
elif [ "$DIST_OS" = "linux" -a -f "/etc/init/${APP_NAME}.conf" ] ; then
upstartRestart
elif [ "$DIST_OS" = "linux" -a -n "$USE_SYSTEMD" -a -z "$SYSD" ] ; then
systemdRestart
elif [ "$DIST_OS" = "aix" -a -z "$SKIP_SRC" ] && [ "`/usr/bin/lssrc -S -s $APP_NAME`" ] ; then
srcRestart
else
if [ -n "$SMF" ] ; then
shift
fi
checkUser touchlock "$COMMAND"
if [ ! -n "$FIXED_COMMAND" ] ; then
shift
fi
stopit "0"
start "$@"
fi
;;
'condrestart')
checkUser touchlock "$COMMAND"
if [ ! -n "$FIXED_COMMAND" ] ; then
shift
fi
stopit "1"
start "$@"
;;
'pause')
if [ -n "$PAUSABLE" ]
then
pause
else
showUsage "$COMMAND"
fi
;;
'resume')
if [ -n "$PAUSABLE" ]
then
resume
else
showUsage "$COMMAND"
fi
;;
'status')
status
;;
'install')
installdaemon "$@"
;;
'installstart')
installdaemon "$@"
startdaemon "$@"
;;
'remove')
removedaemon
;;
'dump')
checkUser "" "$COMMAND"
dump
;;
'start_msg')
# Internal command called by launchd on HP-UX.
checkUser "" "$COMMAND"
startmsg
;;
'stop_msg')
# Internal command called by launchd on HP-UX.
checkUser "" "$COMMAND"
stopmsg
;;
'launchdinternal' | 'upstartinternal')
if [ ! "$DIST_OS" = "macosx" -o ! -f "/Library/LaunchDaemons/${APP_PLIST}" ] ; then
checkUser touchlock "$@"
fi
# Internal command called by launchd on Max OSX.
# We do not want to call checkUser here as it is handled in the launchd plist file. Doing it here would confuse launchd.
if [ ! -n "$FIXED_COMMAND" ] ; then
shift
fi
launchinternal "$@"
;;
*)
showUsage "$COMMAND"
;;
esac
}
sourceFiles
docommand "$@"
exit 0
© 2015 - 2025 Weber Informatics LLC | Privacy Policy