org.smooks.edifact.binding.d17a.IPPOAD Maven / Gradle / Ivy
/*-
* ========================LICENSE_START=================================
* d17a-edifact-binding
* %%
* Copyright (C) 2020 - 2024 Smooks
* %%
* Licensed under the terms of the Apache License Version 2.0, or
* the GNU Lesser General Public License version 3.0 or later.
*
* SPDX-License-Identifier: Apache-2.0 OR LGPL-3.0-or-later
*
* ======================================================================
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* ======================================================================
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 3 of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
* =========================LICENSE_END==================================
*/
//
// This file was generated by the Eclipse Implementation of JAXB, v3.0.2
// See https://eclipse-ee4j.github.io/jaxb-ri
// Any modifications to this file will be lost upon recompilation of the source schema.
// Generated on: 2024.11.12 at 09:05:05 AM UTC
//
package org.smooks.edifact.binding.d17a;
import java.util.ArrayList;
import java.util.Collection;
import java.util.List;
import jakarta.xml.bind.annotation.XmlAccessType;
import jakarta.xml.bind.annotation.XmlAccessorType;
import jakarta.xml.bind.annotation.XmlElement;
import jakarta.xml.bind.annotation.XmlType;
/**
* Java class for IPPOAD complex type.
*
*
The following schema fragment specifies the expected content contained within this class.
*
*
* <complexType name="IPPOAD">
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="BGM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}BGM-BeginningOfMessage"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="9" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="SEQ" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}SEQ-SequenceDetails" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-1" maxOccurs="9" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="PNA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PNA-PartyIdentification"/>
* </sequence>
* <element name="SegGrp-2" maxOccurs="9" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* </sequence>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* <element name="SegGrp-3" maxOccurs="999">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="ICD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ICD-InsuranceCoverDescription"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="99" minOccurs="0"/>
* <element name="CUX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}CUX-Currencies" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="99" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="99" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="99" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-4" maxOccurs="999" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="COD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COD-ComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="99" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="99" minOccurs="0"/>
* <element name="COM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COM-CommunicationContact" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="99" minOccurs="0"/>
* <element name="EFI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EFI-ExternalFileLinkIdentification" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="99" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="9" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-5" maxOccurs="99" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="PCC" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCC-PremiumCalculationComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" maxOccurs="99" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="9" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="9" minOccurs="0"/>
* </sequence>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* <element name="SegGrp-6" maxOccurs="9999" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="PNA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PNA-PartyIdentification"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="99" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="99" minOccurs="0"/>
* <element name="COM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COM-CommunicationContact" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="LOC" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}LOC-PlaceLocationIdentification" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="99" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="99" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-7" maxOccurs="9" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="CTA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}CTA-ContactInformation"/>
* <element name="COM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COM-CommunicationContact" maxOccurs="9" minOccurs="0"/>
* </sequence>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* <element name="SegGrp-8" maxOccurs="999" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="COD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COD-ComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" maxOccurs="9" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="9" minOccurs="0"/>
* <element name="COM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COM-CommunicationContact" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="EFI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EFI-ExternalFileLinkIdentification" minOccurs="0"/>
* <element name="EMP" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EMP-EmploymentDetails" minOccurs="0"/>
* <element name="FII" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FII-FinancialInstitutionInformation" minOccurs="0"/>
* <element name="IMD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IMD-ItemDescription" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="99" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="9" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-9" maxOccurs="99" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="PCC" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCC-PremiumCalculationComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" maxOccurs="99" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="9" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="9" minOccurs="0"/>
* </sequence>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* <element name="SegGrp-10" maxOccurs="9999" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="ROD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ROD-RiskObjectType"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="99" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="99" minOccurs="0"/>
* <element name="COM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COM-CommunicationContact" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="99" minOccurs="0"/>
* <element name="MEA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MEA-Measurements" maxOccurs="99" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="99" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="99" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="99" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-11" maxOccurs="999" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="COD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COD-ComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" maxOccurs="9" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="99" minOccurs="0"/>
* <element name="COM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COM-CommunicationContact" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="EFI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EFI-ExternalFileLinkIdentification" minOccurs="0"/>
* <element name="EMP" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EMP-EmploymentDetails" maxOccurs="9" minOccurs="0"/>
* <element name="IMD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IMD-ItemDescription" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="MEA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MEA-Measurements" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="99" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="99" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-12" maxOccurs="99" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="PCC" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCC-PremiumCalculationComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" maxOccurs="99" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="9" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="9" minOccurs="0"/>
* </sequence>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* <element name="SegGrp-13" maxOccurs="9999" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="EVE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EVE-Event"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="99" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="99" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="MEA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MEA-Measurements" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="99" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="99" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="99" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-14" maxOccurs="999" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="COD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COD-ComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="99" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" maxOccurs="9" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="99" minOccurs="0"/>
* <element name="COM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COM-CommunicationContact" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="EFI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EFI-ExternalFileLinkIdentification" minOccurs="0"/>
* <element name="EMP" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EMP-EmploymentDetails" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="99" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="99" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-15" maxOccurs="99" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="PCC" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCC-PremiumCalculationComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" maxOccurs="99" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="9" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="9" minOccurs="0"/>
* </sequence>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* <element name="SegGrp-16" maxOccurs="99" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="SEQ" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}SEQ-SequenceDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" maxOccurs="9" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="PNA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PNA-PartyIdentification" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="9" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="9" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-17" maxOccurs="99" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="COD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COD-ComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="99" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" maxOccurs="9" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="PNA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PNA-PartyIdentification" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="9" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="9" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-18" maxOccurs="9" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="IMD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IMD-ItemDescription"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="PNA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PNA-PartyIdentification" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="9" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* </sequence>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* <element name="SegGrp-19" maxOccurs="9" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="PYT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PYT-PaymentTerms"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="9" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="9" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-20" maxOccurs="99" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="PCC" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCC-PremiumCalculationComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="9" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="9" minOccurs="0"/>
* </sequence>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
*
*
*
*/
@XmlAccessorType(XmlAccessType.FIELD)
@XmlType(name = "IPPOAD", propOrder = {
"bgm",
"att",
"rff",
"dtm",
"qty",
"seq",
"segGrp1",
"segGrp3",
"segGrp6",
"segGrp10",
"segGrp13",
"segGrp16",
"segGrp19"
})
public class IPPOAD {
@XmlElement(name = "BGM", required = true)
protected BGMBeginningOfMessage bgm;
@XmlElement(name = "ATT")
protected List att;
@XmlElement(name = "RFF")
protected List rff;
@XmlElement(name = "DTM")
protected List dtm;
@XmlElement(name = "QTY")
protected List qty;
@XmlElement(name = "SEQ")
protected SEQSequenceDetails seq;
@XmlElement(name = "SegGrp-1")
protected List segGrp1;
@XmlElement(name = "SegGrp-3", required = true)
protected List segGrp3;
@XmlElement(name = "SegGrp-6")
protected List segGrp6;
@XmlElement(name = "SegGrp-10")
protected List segGrp10;
@XmlElement(name = "SegGrp-13")
protected List segGrp13;
@XmlElement(name = "SegGrp-16")
protected List segGrp16;
@XmlElement(name = "SegGrp-19")
protected List segGrp19;
/**
* Gets the value of the bgm property.
*
* @return
* possible object is
* {@link BGMBeginningOfMessage }
*
*/
public BGMBeginningOfMessage getBGM() {
return bgm;
}
/**
* Sets the value of the bgm property.
*
* @param value
* allowed object is
* {@link BGMBeginningOfMessage }
*
*/
public void setBGM(BGMBeginningOfMessage value) {
this.bgm = value;
}
/**
* Gets the value of the att property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the att property.
*
*
* For example, to add a new item, do as follows:
*
* getATT().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link ATTAttribute }
*
*
*/
public List getATT() {
if (att == null) {
att = new ArrayList();
}
return this.att;
}
/**
* Gets the value of the rff property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the rff property.
*
*
* For example, to add a new item, do as follows:
*
* getRFF().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link RFFReference }
*
*
*/
public List getRFF() {
if (rff == null) {
rff = new ArrayList();
}
return this.rff;
}
/**
* Gets the value of the dtm property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the dtm property.
*
*
* For example, to add a new item, do as follows:
*
* getDTM().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link DTMDateTimePeriod }
*
*
*/
public List getDTM() {
if (dtm == null) {
dtm = new ArrayList();
}
return this.dtm;
}
/**
* Gets the value of the qty property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the qty property.
*
*
* For example, to add a new item, do as follows:
*
* getQTY().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link QTYQuantity }
*
*
*/
public List getQTY() {
if (qty == null) {
qty = new ArrayList();
}
return this.qty;
}
/**
* Gets the value of the seq property.
*
* @return
* possible object is
* {@link SEQSequenceDetails }
*
*/
public SEQSequenceDetails getSEQ() {
return seq;
}
/**
* Sets the value of the seq property.
*
* @param value
* allowed object is
* {@link SEQSequenceDetails }
*
*/
public void setSEQ(SEQSequenceDetails value) {
this.seq = value;
}
/**
* Gets the value of the segGrp1 property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the segGrp1 property.
*
*
* For example, to add a new item, do as follows:
*
* getSegGrp1().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link IPPOAD.SegGrp1 }
*
*
*/
public List getSegGrp1() {
if (segGrp1 == null) {
segGrp1 = new ArrayList();
}
return this.segGrp1;
}
/**
* Gets the value of the segGrp3 property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the segGrp3 property.
*
*
* For example, to add a new item, do as follows:
*
* getSegGrp3().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link IPPOAD.SegGrp3 }
*
*
*/
public List getSegGrp3() {
if (segGrp3 == null) {
segGrp3 = new ArrayList();
}
return this.segGrp3;
}
/**
* Gets the value of the segGrp6 property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the segGrp6 property.
*
*
* For example, to add a new item, do as follows:
*
* getSegGrp6().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link IPPOAD.SegGrp6 }
*
*
*/
public List getSegGrp6() {
if (segGrp6 == null) {
segGrp6 = new ArrayList();
}
return this.segGrp6;
}
/**
* Gets the value of the segGrp10 property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the segGrp10 property.
*
*
* For example, to add a new item, do as follows:
*
* getSegGrp10().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link IPPOAD.SegGrp10 }
*
*
*/
public List getSegGrp10() {
if (segGrp10 == null) {
segGrp10 = new ArrayList();
}
return this.segGrp10;
}
/**
* Gets the value of the segGrp13 property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the segGrp13 property.
*
*
* For example, to add a new item, do as follows:
*
* getSegGrp13().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link IPPOAD.SegGrp13 }
*
*
*/
public List getSegGrp13() {
if (segGrp13 == null) {
segGrp13 = new ArrayList();
}
return this.segGrp13;
}
/**
* Gets the value of the segGrp16 property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the segGrp16 property.
*
*
* For example, to add a new item, do as follows:
*
* getSegGrp16().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link IPPOAD.SegGrp16 }
*
*
*/
public List getSegGrp16() {
if (segGrp16 == null) {
segGrp16 = new ArrayList();
}
return this.segGrp16;
}
/**
* Gets the value of the segGrp19 property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the segGrp19 property.
*
*
* For example, to add a new item, do as follows:
*
* getSegGrp19().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link IPPOAD.SegGrp19 }
*
*
*/
public List getSegGrp19() {
if (segGrp19 == null) {
segGrp19 = new ArrayList();
}
return this.segGrp19;
}
public IPPOAD withBGM(BGMBeginningOfMessage value) {
setBGM(value);
return this;
}
public IPPOAD withATT(ATTAttribute... values) {
if (values!= null) {
for (ATTAttribute value: values) {
getATT().add(value);
}
}
return this;
}
public IPPOAD withATT(Collection values) {
if (values!= null) {
getATT().addAll(values);
}
return this;
}
public IPPOAD withRFF(RFFReference... values) {
if (values!= null) {
for (RFFReference value: values) {
getRFF().add(value);
}
}
return this;
}
public IPPOAD withRFF(Collection values) {
if (values!= null) {
getRFF().addAll(values);
}
return this;
}
public IPPOAD withDTM(DTMDateTimePeriod... values) {
if (values!= null) {
for (DTMDateTimePeriod value: values) {
getDTM().add(value);
}
}
return this;
}
public IPPOAD withDTM(Collection values) {
if (values!= null) {
getDTM().addAll(values);
}
return this;
}
public IPPOAD withQTY(QTYQuantity... values) {
if (values!= null) {
for (QTYQuantity value: values) {
getQTY().add(value);
}
}
return this;
}
public IPPOAD withQTY(Collection values) {
if (values!= null) {
getQTY().addAll(values);
}
return this;
}
public IPPOAD withSEQ(SEQSequenceDetails value) {
setSEQ(value);
return this;
}
public IPPOAD withSegGrp1(IPPOAD.SegGrp1 ... values) {
if (values!= null) {
for (IPPOAD.SegGrp1 value: values) {
getSegGrp1().add(value);
}
}
return this;
}
public IPPOAD withSegGrp1(Collection values) {
if (values!= null) {
getSegGrp1().addAll(values);
}
return this;
}
public IPPOAD withSegGrp3(IPPOAD.SegGrp3 ... values) {
if (values!= null) {
for (IPPOAD.SegGrp3 value: values) {
getSegGrp3().add(value);
}
}
return this;
}
public IPPOAD withSegGrp3(Collection values) {
if (values!= null) {
getSegGrp3().addAll(values);
}
return this;
}
public IPPOAD withSegGrp6(IPPOAD.SegGrp6 ... values) {
if (values!= null) {
for (IPPOAD.SegGrp6 value: values) {
getSegGrp6().add(value);
}
}
return this;
}
public IPPOAD withSegGrp6(Collection values) {
if (values!= null) {
getSegGrp6().addAll(values);
}
return this;
}
public IPPOAD withSegGrp10(IPPOAD.SegGrp10 ... values) {
if (values!= null) {
for (IPPOAD.SegGrp10 value: values) {
getSegGrp10().add(value);
}
}
return this;
}
public IPPOAD withSegGrp10(Collection values) {
if (values!= null) {
getSegGrp10().addAll(values);
}
return this;
}
public IPPOAD withSegGrp13(IPPOAD.SegGrp13 ... values) {
if (values!= null) {
for (IPPOAD.SegGrp13 value: values) {
getSegGrp13().add(value);
}
}
return this;
}
public IPPOAD withSegGrp13(Collection values) {
if (values!= null) {
getSegGrp13().addAll(values);
}
return this;
}
public IPPOAD withSegGrp16(IPPOAD.SegGrp16 ... values) {
if (values!= null) {
for (IPPOAD.SegGrp16 value: values) {
getSegGrp16().add(value);
}
}
return this;
}
public IPPOAD withSegGrp16(Collection values) {
if (values!= null) {
getSegGrp16().addAll(values);
}
return this;
}
public IPPOAD withSegGrp19(IPPOAD.SegGrp19 ... values) {
if (values!= null) {
for (IPPOAD.SegGrp19 value: values) {
getSegGrp19().add(value);
}
}
return this;
}
public IPPOAD withSegGrp19(Collection values) {
if (values!= null) {
getSegGrp19().addAll(values);
}
return this;
}
/**
* Java class for anonymous complex type.
*
*
The following schema fragment specifies the expected content contained within this class.
*
*
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="PNA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PNA-PartyIdentification"/>
* </sequence>
* <element name="SegGrp-2" maxOccurs="9" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* </sequence>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
*
*
*
*/
@XmlAccessorType(XmlAccessType.FIELD)
@XmlType(name = "", propOrder = {
"pna",
"segGrp2"
})
public static class SegGrp1 {
@XmlElement(name = "PNA", required = true)
protected PNAPartyIdentification pna;
@XmlElement(name = "SegGrp-2")
protected List segGrp2;
/**
* Gets the value of the pna property.
*
* @return
* possible object is
* {@link PNAPartyIdentification }
*
*/
public PNAPartyIdentification getPNA() {
return pna;
}
/**
* Sets the value of the pna property.
*
* @param value
* allowed object is
* {@link PNAPartyIdentification }
*
*/
public void setPNA(PNAPartyIdentification value) {
this.pna = value;
}
/**
* Gets the value of the segGrp2 property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the segGrp2 property.
*
*
* For example, to add a new item, do as follows:
*
* getSegGrp2().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link IPPOAD.SegGrp1 .SegGrp2 }
*
*
*/
public List getSegGrp2() {
if (segGrp2 == null) {
segGrp2 = new ArrayList();
}
return this.segGrp2;
}
public IPPOAD.SegGrp1 withPNA(PNAPartyIdentification value) {
setPNA(value);
return this;
}
public IPPOAD.SegGrp1 withSegGrp2(IPPOAD.SegGrp1 .SegGrp2 ... values) {
if (values!= null) {
for (IPPOAD.SegGrp1 .SegGrp2 value: values) {
getSegGrp2().add(value);
}
}
return this;
}
public IPPOAD.SegGrp1 withSegGrp2(Collection values) {
if (values!= null) {
getSegGrp2().addAll(values);
}
return this;
}
/**
* Java class for anonymous complex type.
*
*
The following schema fragment specifies the expected content contained within this class.
*
*
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* </sequence>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
*
*
*
*/
@XmlAccessorType(XmlAccessType.FIELD)
@XmlType(name = "", propOrder = {
"rff",
"dtm"
})
public static class SegGrp2 {
@XmlElement(name = "RFF", required = true)
protected RFFReference rff;
@XmlElement(name = "DTM")
protected List dtm;
/**
* Gets the value of the rff property.
*
* @return
* possible object is
* {@link RFFReference }
*
*/
public RFFReference getRFF() {
return rff;
}
/**
* Sets the value of the rff property.
*
* @param value
* allowed object is
* {@link RFFReference }
*
*/
public void setRFF(RFFReference value) {
this.rff = value;
}
/**
* Gets the value of the dtm property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the dtm property.
*
*
* For example, to add a new item, do as follows:
*
* getDTM().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link DTMDateTimePeriod }
*
*
*/
public List getDTM() {
if (dtm == null) {
dtm = new ArrayList();
}
return this.dtm;
}
public IPPOAD.SegGrp1 .SegGrp2 withRFF(RFFReference value) {
setRFF(value);
return this;
}
public IPPOAD.SegGrp1 .SegGrp2 withDTM(DTMDateTimePeriod... values) {
if (values!= null) {
for (DTMDateTimePeriod value: values) {
getDTM().add(value);
}
}
return this;
}
public IPPOAD.SegGrp1 .SegGrp2 withDTM(Collection values) {
if (values!= null) {
getDTM().addAll(values);
}
return this;
}
}
}
/**
* Java class for anonymous complex type.
*
*
The following schema fragment specifies the expected content contained within this class.
*
*
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="ROD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ROD-RiskObjectType"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="99" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="99" minOccurs="0"/>
* <element name="COM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COM-CommunicationContact" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="99" minOccurs="0"/>
* <element name="MEA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MEA-Measurements" maxOccurs="99" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="99" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="99" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="99" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-11" maxOccurs="999" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="COD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COD-ComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" maxOccurs="9" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="99" minOccurs="0"/>
* <element name="COM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COM-CommunicationContact" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="EFI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EFI-ExternalFileLinkIdentification" minOccurs="0"/>
* <element name="EMP" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EMP-EmploymentDetails" maxOccurs="9" minOccurs="0"/>
* <element name="IMD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IMD-ItemDescription" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="MEA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MEA-Measurements" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="99" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="99" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-12" maxOccurs="99" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="PCC" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCC-PremiumCalculationComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" maxOccurs="99" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="9" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="9" minOccurs="0"/>
* </sequence>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
*
*
*
*/
@XmlAccessorType(XmlAccessType.FIELD)
@XmlType(name = "", propOrder = {
"rod",
"ide",
"gei",
"att",
"com",
"dtm",
"mea",
"moa",
"pcd",
"qrs",
"qty",
"rff",
"ftx",
"segGrp11"
})
public static class SegGrp10 {
@XmlElement(name = "ROD", required = true)
protected RODRiskObjectType rod;
@XmlElement(name = "IDE")
protected List ide;
@XmlElement(name = "GEI")
protected GEIProcessingInformation gei;
@XmlElement(name = "ATT")
protected List att;
@XmlElement(name = "COM")
protected List com;
@XmlElement(name = "DTM")
protected List dtm;
@XmlElement(name = "MEA")
protected List mea;
@XmlElement(name = "MOA")
protected List moa;
@XmlElement(name = "PCD")
protected List pcd;
@XmlElement(name = "QRS")
protected List qrs;
@XmlElement(name = "QTY")
protected List qty;
@XmlElement(name = "RFF")
protected List rff;
@XmlElement(name = "FTX")
protected List ftx;
@XmlElement(name = "SegGrp-11")
protected List segGrp11;
/**
* Gets the value of the rod property.
*
* @return
* possible object is
* {@link RODRiskObjectType }
*
*/
public RODRiskObjectType getROD() {
return rod;
}
/**
* Sets the value of the rod property.
*
* @param value
* allowed object is
* {@link RODRiskObjectType }
*
*/
public void setROD(RODRiskObjectType value) {
this.rod = value;
}
/**
* Gets the value of the ide property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the ide property.
*
*
* For example, to add a new item, do as follows:
*
* getIDE().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link IDEIdentity }
*
*
*/
public List getIDE() {
if (ide == null) {
ide = new ArrayList();
}
return this.ide;
}
/**
* Gets the value of the gei property.
*
* @return
* possible object is
* {@link GEIProcessingInformation }
*
*/
public GEIProcessingInformation getGEI() {
return gei;
}
/**
* Sets the value of the gei property.
*
* @param value
* allowed object is
* {@link GEIProcessingInformation }
*
*/
public void setGEI(GEIProcessingInformation value) {
this.gei = value;
}
/**
* Gets the value of the att property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the att property.
*
*
* For example, to add a new item, do as follows:
*
* getATT().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link ATTAttribute }
*
*
*/
public List getATT() {
if (att == null) {
att = new ArrayList();
}
return this.att;
}
/**
* Gets the value of the com property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the com property.
*
*
* For example, to add a new item, do as follows:
*
* getCOM().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link COMCommunicationContact }
*
*
*/
public List getCOM() {
if (com == null) {
com = new ArrayList();
}
return this.com;
}
/**
* Gets the value of the dtm property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the dtm property.
*
*
* For example, to add a new item, do as follows:
*
* getDTM().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link DTMDateTimePeriod }
*
*
*/
public List getDTM() {
if (dtm == null) {
dtm = new ArrayList();
}
return this.dtm;
}
/**
* Gets the value of the mea property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the mea property.
*
*
* For example, to add a new item, do as follows:
*
* getMEA().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link MEAMeasurements }
*
*
*/
public List getMEA() {
if (mea == null) {
mea = new ArrayList();
}
return this.mea;
}
/**
* Gets the value of the moa property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the moa property.
*
*
* For example, to add a new item, do as follows:
*
* getMOA().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link MOAMonetaryAmount }
*
*
*/
public List getMOA() {
if (moa == null) {
moa = new ArrayList();
}
return this.moa;
}
/**
* Gets the value of the pcd property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the pcd property.
*
*
* For example, to add a new item, do as follows:
*
* getPCD().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link PCDPercentageDetails }
*
*
*/
public List getPCD() {
if (pcd == null) {
pcd = new ArrayList();
}
return this.pcd;
}
/**
* Gets the value of the qrs property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the qrs property.
*
*
* For example, to add a new item, do as follows:
*
* getQRS().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link QRSQueryAndResponse }
*
*
*/
public List getQRS() {
if (qrs == null) {
qrs = new ArrayList();
}
return this.qrs;
}
/**
* Gets the value of the qty property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the qty property.
*
*
* For example, to add a new item, do as follows:
*
* getQTY().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link QTYQuantity }
*
*
*/
public List getQTY() {
if (qty == null) {
qty = new ArrayList();
}
return this.qty;
}
/**
* Gets the value of the rff property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the rff property.
*
*
* For example, to add a new item, do as follows:
*
* getRFF().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link RFFReference }
*
*
*/
public List getRFF() {
if (rff == null) {
rff = new ArrayList();
}
return this.rff;
}
/**
* Gets the value of the ftx property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the ftx property.
*
*
* For example, to add a new item, do as follows:
*
* getFTX().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link FTXFreeText }
*
*
*/
public List getFTX() {
if (ftx == null) {
ftx = new ArrayList();
}
return this.ftx;
}
/**
* Gets the value of the segGrp11 property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the segGrp11 property.
*
*
* For example, to add a new item, do as follows:
*
* getSegGrp11().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link IPPOAD.SegGrp10 .SegGrp11 }
*
*
*/
public List getSegGrp11() {
if (segGrp11 == null) {
segGrp11 = new ArrayList();
}
return this.segGrp11;
}
public IPPOAD.SegGrp10 withROD(RODRiskObjectType value) {
setROD(value);
return this;
}
public IPPOAD.SegGrp10 withIDE(IDEIdentity... values) {
if (values!= null) {
for (IDEIdentity value: values) {
getIDE().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 withIDE(Collection values) {
if (values!= null) {
getIDE().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 withGEI(GEIProcessingInformation value) {
setGEI(value);
return this;
}
public IPPOAD.SegGrp10 withATT(ATTAttribute... values) {
if (values!= null) {
for (ATTAttribute value: values) {
getATT().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 withATT(Collection values) {
if (values!= null) {
getATT().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 withCOM(COMCommunicationContact... values) {
if (values!= null) {
for (COMCommunicationContact value: values) {
getCOM().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 withCOM(Collection values) {
if (values!= null) {
getCOM().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 withDTM(DTMDateTimePeriod... values) {
if (values!= null) {
for (DTMDateTimePeriod value: values) {
getDTM().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 withDTM(Collection values) {
if (values!= null) {
getDTM().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 withMEA(MEAMeasurements... values) {
if (values!= null) {
for (MEAMeasurements value: values) {
getMEA().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 withMEA(Collection values) {
if (values!= null) {
getMEA().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 withMOA(MOAMonetaryAmount... values) {
if (values!= null) {
for (MOAMonetaryAmount value: values) {
getMOA().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 withMOA(Collection values) {
if (values!= null) {
getMOA().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 withPCD(PCDPercentageDetails... values) {
if (values!= null) {
for (PCDPercentageDetails value: values) {
getPCD().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 withPCD(Collection values) {
if (values!= null) {
getPCD().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 withQRS(QRSQueryAndResponse... values) {
if (values!= null) {
for (QRSQueryAndResponse value: values) {
getQRS().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 withQRS(Collection values) {
if (values!= null) {
getQRS().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 withQTY(QTYQuantity... values) {
if (values!= null) {
for (QTYQuantity value: values) {
getQTY().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 withQTY(Collection values) {
if (values!= null) {
getQTY().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 withRFF(RFFReference... values) {
if (values!= null) {
for (RFFReference value: values) {
getRFF().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 withRFF(Collection values) {
if (values!= null) {
getRFF().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 withFTX(FTXFreeText... values) {
if (values!= null) {
for (FTXFreeText value: values) {
getFTX().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 withFTX(Collection values) {
if (values!= null) {
getFTX().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 withSegGrp11(IPPOAD.SegGrp10 .SegGrp11 ... values) {
if (values!= null) {
for (IPPOAD.SegGrp10 .SegGrp11 value: values) {
getSegGrp11().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 withSegGrp11(Collection values) {
if (values!= null) {
getSegGrp11().addAll(values);
}
return this;
}
/**
* Java class for anonymous complex type.
*
*
The following schema fragment specifies the expected content contained within this class.
*
*
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="COD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COD-ComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" maxOccurs="9" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="99" minOccurs="0"/>
* <element name="COM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COM-CommunicationContact" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="EFI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EFI-ExternalFileLinkIdentification" minOccurs="0"/>
* <element name="EMP" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EMP-EmploymentDetails" maxOccurs="9" minOccurs="0"/>
* <element name="IMD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IMD-ItemDescription" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="MEA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MEA-Measurements" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="99" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="99" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-12" maxOccurs="99" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="PCC" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCC-PremiumCalculationComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" maxOccurs="99" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="9" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="9" minOccurs="0"/>
* </sequence>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
*
*
*
*/
@XmlAccessorType(XmlAccessType.FIELD)
@XmlType(name = "", propOrder = {
"cod",
"ide",
"gei",
"adr",
"att",
"com",
"dtm",
"efi",
"emp",
"imd",
"moa",
"mea",
"pcd",
"qrs",
"qty",
"rff",
"ftx",
"segGrp12"
})
public static class SegGrp11 {
@XmlElement(name = "COD", required = true)
protected CODComponentDetails cod;
@XmlElement(name = "IDE")
protected List ide;
@XmlElement(name = "GEI")
protected GEIProcessingInformation gei;
@XmlElement(name = "ADR")
protected List adr;
@XmlElement(name = "ATT")
protected List att;
@XmlElement(name = "COM")
protected List com;
@XmlElement(name = "DTM")
protected List dtm;
@XmlElement(name = "EFI")
protected EFIExternalFileLinkIdentification efi;
@XmlElement(name = "EMP")
protected List emp;
@XmlElement(name = "IMD")
protected List imd;
@XmlElement(name = "MOA")
protected List moa;
@XmlElement(name = "MEA")
protected List mea;
@XmlElement(name = "PCD")
protected List pcd;
@XmlElement(name = "QRS")
protected List qrs;
@XmlElement(name = "QTY")
protected List qty;
@XmlElement(name = "RFF")
protected List rff;
@XmlElement(name = "FTX")
protected List ftx;
@XmlElement(name = "SegGrp-12")
protected List segGrp12;
/**
* Gets the value of the cod property.
*
* @return
* possible object is
* {@link CODComponentDetails }
*
*/
public CODComponentDetails getCOD() {
return cod;
}
/**
* Sets the value of the cod property.
*
* @param value
* allowed object is
* {@link CODComponentDetails }
*
*/
public void setCOD(CODComponentDetails value) {
this.cod = value;
}
/**
* Gets the value of the ide property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the ide property.
*
*
* For example, to add a new item, do as follows:
*
* getIDE().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link IDEIdentity }
*
*
*/
public List getIDE() {
if (ide == null) {
ide = new ArrayList();
}
return this.ide;
}
/**
* Gets the value of the gei property.
*
* @return
* possible object is
* {@link GEIProcessingInformation }
*
*/
public GEIProcessingInformation getGEI() {
return gei;
}
/**
* Sets the value of the gei property.
*
* @param value
* allowed object is
* {@link GEIProcessingInformation }
*
*/
public void setGEI(GEIProcessingInformation value) {
this.gei = value;
}
/**
* Gets the value of the adr property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the adr property.
*
*
* For example, to add a new item, do as follows:
*
* getADR().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link ADRAddress }
*
*
*/
public List getADR() {
if (adr == null) {
adr = new ArrayList();
}
return this.adr;
}
/**
* Gets the value of the att property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the att property.
*
*
* For example, to add a new item, do as follows:
*
* getATT().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link ATTAttribute }
*
*
*/
public List getATT() {
if (att == null) {
att = new ArrayList();
}
return this.att;
}
/**
* Gets the value of the com property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the com property.
*
*
* For example, to add a new item, do as follows:
*
* getCOM().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link COMCommunicationContact }
*
*
*/
public List getCOM() {
if (com == null) {
com = new ArrayList();
}
return this.com;
}
/**
* Gets the value of the dtm property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the dtm property.
*
*
* For example, to add a new item, do as follows:
*
* getDTM().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link DTMDateTimePeriod }
*
*
*/
public List getDTM() {
if (dtm == null) {
dtm = new ArrayList();
}
return this.dtm;
}
/**
* Gets the value of the efi property.
*
* @return
* possible object is
* {@link EFIExternalFileLinkIdentification }
*
*/
public EFIExternalFileLinkIdentification getEFI() {
return efi;
}
/**
* Sets the value of the efi property.
*
* @param value
* allowed object is
* {@link EFIExternalFileLinkIdentification }
*
*/
public void setEFI(EFIExternalFileLinkIdentification value) {
this.efi = value;
}
/**
* Gets the value of the emp property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the emp property.
*
*
* For example, to add a new item, do as follows:
*
* getEMP().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link EMPEmploymentDetails }
*
*
*/
public List getEMP() {
if (emp == null) {
emp = new ArrayList();
}
return this.emp;
}
/**
* Gets the value of the imd property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the imd property.
*
*
* For example, to add a new item, do as follows:
*
* getIMD().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link IMDItemDescription }
*
*
*/
public List getIMD() {
if (imd == null) {
imd = new ArrayList();
}
return this.imd;
}
/**
* Gets the value of the moa property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the moa property.
*
*
* For example, to add a new item, do as follows:
*
* getMOA().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link MOAMonetaryAmount }
*
*
*/
public List getMOA() {
if (moa == null) {
moa = new ArrayList();
}
return this.moa;
}
/**
* Gets the value of the mea property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the mea property.
*
*
* For example, to add a new item, do as follows:
*
* getMEA().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link MEAMeasurements }
*
*
*/
public List getMEA() {
if (mea == null) {
mea = new ArrayList();
}
return this.mea;
}
/**
* Gets the value of the pcd property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the pcd property.
*
*
* For example, to add a new item, do as follows:
*
* getPCD().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link PCDPercentageDetails }
*
*
*/
public List getPCD() {
if (pcd == null) {
pcd = new ArrayList();
}
return this.pcd;
}
/**
* Gets the value of the qrs property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the qrs property.
*
*
* For example, to add a new item, do as follows:
*
* getQRS().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link QRSQueryAndResponse }
*
*
*/
public List getQRS() {
if (qrs == null) {
qrs = new ArrayList();
}
return this.qrs;
}
/**
* Gets the value of the qty property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the qty property.
*
*
* For example, to add a new item, do as follows:
*
* getQTY().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link QTYQuantity }
*
*
*/
public List getQTY() {
if (qty == null) {
qty = new ArrayList();
}
return this.qty;
}
/**
* Gets the value of the rff property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the rff property.
*
*
* For example, to add a new item, do as follows:
*
* getRFF().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link RFFReference }
*
*
*/
public List getRFF() {
if (rff == null) {
rff = new ArrayList();
}
return this.rff;
}
/**
* Gets the value of the ftx property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the ftx property.
*
*
* For example, to add a new item, do as follows:
*
* getFTX().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link FTXFreeText }
*
*
*/
public List getFTX() {
if (ftx == null) {
ftx = new ArrayList();
}
return this.ftx;
}
/**
* Gets the value of the segGrp12 property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the segGrp12 property.
*
*
* For example, to add a new item, do as follows:
*
* getSegGrp12().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 }
*
*
*/
public List getSegGrp12() {
if (segGrp12 == null) {
segGrp12 = new ArrayList();
}
return this.segGrp12;
}
public IPPOAD.SegGrp10 .SegGrp11 withCOD(CODComponentDetails value) {
setCOD(value);
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withIDE(IDEIdentity... values) {
if (values!= null) {
for (IDEIdentity value: values) {
getIDE().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withIDE(Collection values) {
if (values!= null) {
getIDE().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withGEI(GEIProcessingInformation value) {
setGEI(value);
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withADR(ADRAddress... values) {
if (values!= null) {
for (ADRAddress value: values) {
getADR().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withADR(Collection values) {
if (values!= null) {
getADR().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withATT(ATTAttribute... values) {
if (values!= null) {
for (ATTAttribute value: values) {
getATT().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withATT(Collection values) {
if (values!= null) {
getATT().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withCOM(COMCommunicationContact... values) {
if (values!= null) {
for (COMCommunicationContact value: values) {
getCOM().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withCOM(Collection values) {
if (values!= null) {
getCOM().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withDTM(DTMDateTimePeriod... values) {
if (values!= null) {
for (DTMDateTimePeriod value: values) {
getDTM().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withDTM(Collection values) {
if (values!= null) {
getDTM().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withEFI(EFIExternalFileLinkIdentification value) {
setEFI(value);
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withEMP(EMPEmploymentDetails... values) {
if (values!= null) {
for (EMPEmploymentDetails value: values) {
getEMP().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withEMP(Collection values) {
if (values!= null) {
getEMP().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withIMD(IMDItemDescription... values) {
if (values!= null) {
for (IMDItemDescription value: values) {
getIMD().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withIMD(Collection values) {
if (values!= null) {
getIMD().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withMOA(MOAMonetaryAmount... values) {
if (values!= null) {
for (MOAMonetaryAmount value: values) {
getMOA().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withMOA(Collection values) {
if (values!= null) {
getMOA().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withMEA(MEAMeasurements... values) {
if (values!= null) {
for (MEAMeasurements value: values) {
getMEA().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withMEA(Collection values) {
if (values!= null) {
getMEA().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withPCD(PCDPercentageDetails... values) {
if (values!= null) {
for (PCDPercentageDetails value: values) {
getPCD().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withPCD(Collection values) {
if (values!= null) {
getPCD().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withQRS(QRSQueryAndResponse... values) {
if (values!= null) {
for (QRSQueryAndResponse value: values) {
getQRS().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withQRS(Collection values) {
if (values!= null) {
getQRS().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withQTY(QTYQuantity... values) {
if (values!= null) {
for (QTYQuantity value: values) {
getQTY().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withQTY(Collection values) {
if (values!= null) {
getQTY().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withRFF(RFFReference... values) {
if (values!= null) {
for (RFFReference value: values) {
getRFF().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withRFF(Collection values) {
if (values!= null) {
getRFF().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withFTX(FTXFreeText... values) {
if (values!= null) {
for (FTXFreeText value: values) {
getFTX().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withFTX(Collection values) {
if (values!= null) {
getFTX().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withSegGrp12(IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 ... values) {
if (values!= null) {
for (IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 value: values) {
getSegGrp12().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 withSegGrp12(Collection values) {
if (values!= null) {
getSegGrp12().addAll(values);
}
return this;
}
/**
* Java class for anonymous complex type.
*
*
The following schema fragment specifies the expected content contained within this class.
*
*
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="PCC" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCC-PremiumCalculationComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" maxOccurs="99" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="9" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="9" minOccurs="0"/>
* </sequence>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
*
*
*
*/
@XmlAccessorType(XmlAccessType.FIELD)
@XmlType(name = "", propOrder = {
"pcc",
"ide",
"adr",
"att",
"dtm",
"moa",
"pcd",
"qrs",
"qty",
"ftx"
})
public static class SegGrp12 {
@XmlElement(name = "PCC", required = true)
protected PCCPremiumCalculationComponentDetails pcc;
@XmlElement(name = "IDE")
protected List ide;
@XmlElement(name = "ADR")
protected List adr;
@XmlElement(name = "ATT")
protected List att;
@XmlElement(name = "DTM")
protected List dtm;
@XmlElement(name = "MOA")
protected List moa;
@XmlElement(name = "PCD")
protected List pcd;
@XmlElement(name = "QRS")
protected List qrs;
@XmlElement(name = "QTY")
protected List qty;
@XmlElement(name = "FTX")
protected List ftx;
/**
* Gets the value of the pcc property.
*
* @return
* possible object is
* {@link PCCPremiumCalculationComponentDetails }
*
*/
public PCCPremiumCalculationComponentDetails getPCC() {
return pcc;
}
/**
* Sets the value of the pcc property.
*
* @param value
* allowed object is
* {@link PCCPremiumCalculationComponentDetails }
*
*/
public void setPCC(PCCPremiumCalculationComponentDetails value) {
this.pcc = value;
}
/**
* Gets the value of the ide property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the ide property.
*
*
* For example, to add a new item, do as follows:
*
* getIDE().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link IDEIdentity }
*
*
*/
public List getIDE() {
if (ide == null) {
ide = new ArrayList();
}
return this.ide;
}
/**
* Gets the value of the adr property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the adr property.
*
*
* For example, to add a new item, do as follows:
*
* getADR().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link ADRAddress }
*
*
*/
public List getADR() {
if (adr == null) {
adr = new ArrayList();
}
return this.adr;
}
/**
* Gets the value of the att property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the att property.
*
*
* For example, to add a new item, do as follows:
*
* getATT().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link ATTAttribute }
*
*
*/
public List getATT() {
if (att == null) {
att = new ArrayList();
}
return this.att;
}
/**
* Gets the value of the dtm property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the dtm property.
*
*
* For example, to add a new item, do as follows:
*
* getDTM().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link DTMDateTimePeriod }
*
*
*/
public List getDTM() {
if (dtm == null) {
dtm = new ArrayList();
}
return this.dtm;
}
/**
* Gets the value of the moa property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the moa property.
*
*
* For example, to add a new item, do as follows:
*
* getMOA().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link MOAMonetaryAmount }
*
*
*/
public List getMOA() {
if (moa == null) {
moa = new ArrayList();
}
return this.moa;
}
/**
* Gets the value of the pcd property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the pcd property.
*
*
* For example, to add a new item, do as follows:
*
* getPCD().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link PCDPercentageDetails }
*
*
*/
public List getPCD() {
if (pcd == null) {
pcd = new ArrayList();
}
return this.pcd;
}
/**
* Gets the value of the qrs property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the qrs property.
*
*
* For example, to add a new item, do as follows:
*
* getQRS().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link QRSQueryAndResponse }
*
*
*/
public List getQRS() {
if (qrs == null) {
qrs = new ArrayList();
}
return this.qrs;
}
/**
* Gets the value of the qty property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the qty property.
*
*
* For example, to add a new item, do as follows:
*
* getQTY().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link QTYQuantity }
*
*
*/
public List getQTY() {
if (qty == null) {
qty = new ArrayList();
}
return this.qty;
}
/**
* Gets the value of the ftx property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the Jakarta XML Binding object.
* This is why there is not a set method for the ftx property.
*
*
* For example, to add a new item, do as follows:
*
* getFTX().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link FTXFreeText }
*
*
*/
public List getFTX() {
if (ftx == null) {
ftx = new ArrayList();
}
return this.ftx;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withPCC(PCCPremiumCalculationComponentDetails value) {
setPCC(value);
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withIDE(IDEIdentity... values) {
if (values!= null) {
for (IDEIdentity value: values) {
getIDE().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withIDE(Collection values) {
if (values!= null) {
getIDE().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withADR(ADRAddress... values) {
if (values!= null) {
for (ADRAddress value: values) {
getADR().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withADR(Collection values) {
if (values!= null) {
getADR().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withATT(ATTAttribute... values) {
if (values!= null) {
for (ATTAttribute value: values) {
getATT().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withATT(Collection values) {
if (values!= null) {
getATT().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withDTM(DTMDateTimePeriod... values) {
if (values!= null) {
for (DTMDateTimePeriod value: values) {
getDTM().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withDTM(Collection values) {
if (values!= null) {
getDTM().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withMOA(MOAMonetaryAmount... values) {
if (values!= null) {
for (MOAMonetaryAmount value: values) {
getMOA().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withMOA(Collection values) {
if (values!= null) {
getMOA().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withPCD(PCDPercentageDetails... values) {
if (values!= null) {
for (PCDPercentageDetails value: values) {
getPCD().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withPCD(Collection values) {
if (values!= null) {
getPCD().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withQRS(QRSQueryAndResponse... values) {
if (values!= null) {
for (QRSQueryAndResponse value: values) {
getQRS().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withQRS(Collection values) {
if (values!= null) {
getQRS().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withQTY(QTYQuantity... values) {
if (values!= null) {
for (QTYQuantity value: values) {
getQTY().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withQTY(Collection values) {
if (values!= null) {
getQTY().addAll(values);
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withFTX(FTXFreeText... values) {
if (values!= null) {
for (FTXFreeText value: values) {
getFTX().add(value);
}
}
return this;
}
public IPPOAD.SegGrp10 .SegGrp11 .SegGrp12 withFTX(Collection values) {
if (values!= null) {
getFTX().addAll(values);
}
return this;
}
}
}
}
/**
* Java class for anonymous complex type.
*
*
The following schema fragment specifies the expected content contained within this class.
*
*
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="EVE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EVE-Event"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="99" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="99" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="MEA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MEA-Measurements" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="99" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="99" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="99" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-14" maxOccurs="999" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="COD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COD-ComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="99" minOccurs="0"/>
* <element name="GEI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}GEI-ProcessingInformation" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" maxOccurs="9" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="99" minOccurs="0"/>
* <element name="COM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}COM-CommunicationContact" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="EFI" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EFI-ExternalFileLinkIdentification" minOccurs="0"/>
* <element name="EMP" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}EMP-EmploymentDetails" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="99" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="RFF" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}RFF-Reference" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="99" minOccurs="0"/>
* </sequence>
* <element name="SegGrp-15" maxOccurs="99" minOccurs="0">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <sequence>
* <element name="PCC" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCC-PremiumCalculationComponentDetails"/>
* <element name="IDE" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}IDE-Identity" maxOccurs="9" minOccurs="0"/>
* <element name="ADR" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ADR-Address" maxOccurs="99" minOccurs="0"/>
* <element name="ATT" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}ATT-Attribute" maxOccurs="9" minOccurs="0"/>
* <element name="DTM" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}DTM-DateTimePeriod" maxOccurs="9" minOccurs="0"/>
* <element name="MOA" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}MOA-MonetaryAmount" maxOccurs="9" minOccurs="0"/>
* <element name="PCD" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}PCD-PercentageDetails" maxOccurs="9" minOccurs="0"/>
* <element name="QRS" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QRS-QueryAndResponse" maxOccurs="9" minOccurs="0"/>
* <element name="QTY" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}QTY-Quantity" maxOccurs="9" minOccurs="0"/>
* <element name="FTX" type="{http://www.ibm.com/dfdl/edi/un/edifact/D17A}FTX-FreeText" maxOccurs="9" minOccurs="0"/>
* </sequence>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
*
*
*
*/
@XmlAccessorType(XmlAccessType.FIELD)
@XmlType(name = "", propOrder = {
"eve",
"ide",
"gei",
"att",
"dtm",
"mea",
"moa",
"pcd",
"qrs",
"qty",
"rff",
"ftx",
"segGrp14"
})
public static class SegGrp13 {
@XmlElement(name = "EVE", required = true)
protected EVEEvent eve;
@XmlElement(name = "IDE")
protected List ide;
@XmlElement(name = "GEI")
protected GEIProcessingInformation gei;
@XmlElement(name = "ATT")
protected List att;
@XmlElement(name = "DTM")
protected List dtm;
@XmlElement(name = "MEA")
protected List mea;
@XmlElement(name = "MOA")
protected List