All Downloads are FREE. Search and download functionalities are using the official Maven repository.

org.testifyproject.google.common.cache.CacheBuilder Maven / Gradle / Ivy

Go to download

There is a newer version: 1.0.0
Show newest version
/*
 * Copyright (C) 2009 The Guava Authors
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in org.testifyproject.testifyprojectpliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org.testifyproject/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.cache;

import static org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.base.Preconditions.checkArgument;
import static org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.base.Preconditions.checkNotNull;
import static org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.base.Preconditions.checkState;

import org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.annotations.Beta;
import org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.annotations.GwtCompatible;
import org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.annotations.GwtIncompatible;
import org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.base.Ascii;
import org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.base.Equivalence;
import org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.base.MoreObjects;
import org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.base.Supplier;
import org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.base.Suppliers;
import org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.base.Ticker;
import org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.cache.AbstractCache.SimpleStatsCounter;
import org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.cache.AbstractCache.StatsCounter;
import org.testifyproject.testifyproject.google.org.testifyproject.testifyprojectmon.cache.LocalCache.Strength;

import java.lang.ref.SoftReference;
import java.lang.ref.WeakReference;
import java.util.ConcurrentModificationException;
import java.util.concurrent.ConcurrentHashMap;
import java.util.concurrent.TimeUnit;
import java.util.logging.Level;
import java.util.logging.Logger;

import javax.annotation.CheckReturnValue;

/**
 * 
A builder of {@link LoadingCache} and {@link Cache} instances having any org.testifyproject.testifyprojectbination of the
 * following features:
 *
 * 
    
 * 
  • automatic loading of entries into the cache
 * 
  • least-recently-used eviction when a maximum size is exceeded
 * 
  • time-based expiration of entries, measured since last access or last write
 * 
  • keys automatically wrapped in {@linkplain WeakReference weak} references
 * 
  • values automatically wrapped in {@linkplain WeakReference weak} or
 *     {@linkplain SoftReference soft} references
 * 
  • notification of evicted (or otherwise removed) entries
 * 
  • accumulation of cache access statistics
 * 

 *
 * 
These features are all optional; caches can be created using all or none of them. By org.testifyproject.testifyprojectfault
 * cache instances created by {@code CacheBuilder} will not perform any type of eviction.
 *
 * 
Usage example: 
   {@code
 *
 *   LoadingCache graphs = CacheBuilder.newBuilder()
 *       .maximumSize(10000)
 *       .expireAfterWrite(10, TimeUnit.MINUTES)
 *       .removalListener(MY_LISTENER)
 *       .build(
 *           new CacheLoader() {
 *             public Graph load(Key key) throws AnyException {
 *               return createExpensiveGraph(key);
 *             }
 *           });}

 *
 * 
Or equivalently, 
   {@code
 *
 *   // In real life this would org.testifyproject.testifyprojecte from a org.testifyproject.testifyprojectmand-line flag or config file
 *   String spec = "maximumSize=10000,expireAfterWrite=10m";
 *
 *   LoadingCache graphs = CacheBuilder.from(spec)
 *       .removalListener(MY_LISTENER)
 *       .build(
 *           new CacheLoader() {
 *             public Graph load(Key key) throws AnyException {
 *               return createExpensiveGraph(key);
 *             }
 *           });}

 *
 * 
The returned cache is implemented as a hash table with similar performance characteristics to
 * {@link ConcurrentHashMap}. It implements all optional operations of the {@link LoadingCache} and
 * {@link Cache} interfaces. The {@code asMap} view (and its collection views) have weakly
 * consistent iterators. This means that they are safe for concurrent use, but if other threads
 * modify the cache after the iterator is created, it is undefined which of these changes, if any,
 * are reflected in that iterator. These iterators never throw {@link
 * ConcurrentModificationException}.
 *
 * 
Note: by org.testifyproject.testifyprojectfault, the returned cache uses equality org.testifyproject.testifyprojectparisons (the
 * {@link Object#equals equals} method) to org.testifyproject.testifyprojecttermine equality for keys or values. However, if
 * {@link #weakKeys} was specified, the cache uses identity ({@code ==})
 * org.testifyproject.testifyprojectparisons instead for keys. Likewise, if {@link #weakValues} or {@link #softValues} was
 * specified, the cache uses identity org.testifyproject.testifyprojectparisons for values.
 *
 * 
Entries are automatically evicted from the cache when any of
 * {@linkplain #maximumSize(long) maximumSize}, {@linkplain #maximumWeight(long) maximumWeight},
 * {@linkplain #expireAfterWrite expireAfterWrite},
 * {@linkplain #expireAfterAccess expireAfterAccess}, {@linkplain #weakKeys weakKeys},
 * {@linkplain #weakValues weakValues}, or {@linkplain #softValues softValues} are requested.
 *
 * 
If {@linkplain #maximumSize(long) maximumSize} or
 * {@linkplain #maximumWeight(long) maximumWeight} is requested entries may be evicted on each cache
 * modification.
 *
 * 
If {@linkplain #expireAfterWrite expireAfterWrite} or
 * {@linkplain #expireAfterAccess expireAfterAccess} is requested entries may be evicted on each
 * cache modification, on occasional cache accesses, or on calls to {@link Cache#cleanUp}. Expired
 * entries may be counted by {@link Cache#size}, but will never be visible to read or write
 * operations.
 *
 * 
If {@linkplain #weakKeys weakKeys}, {@linkplain #weakValues weakValues}, or
 * {@linkplain #softValues softValues} are requested, it is possible for a key or value present in
 * the cache to be reclaimed by the garbage collector. Entries with reclaimed keys or values may be
 * removed from the cache on each cache modification, on occasional cache accesses, or on calls to
 * {@link Cache#cleanUp}; such entries may be counted in {@link Cache#size}, but will never be
 * visible to read or write operations.
 *
 * 
Certain cache configurations will result in the accrual of periodic maintenance tasks which
 * will be performed during write operations, or during occasional read operations in the absence of
 * writes. The {@link Cache#cleanUp} method of the returned cache will also perform maintenance, but
 * calling it should not be necessary with a high throughput cache. Only caches built with
 * {@linkplain #removalListener removalListener}, {@linkplain #expireAfterWrite expireAfterWrite},
 * {@linkplain #expireAfterAccess expireAfterAccess}, {@linkplain #weakKeys weakKeys},
 * {@linkplain #weakValues weakValues}, or {@linkplain #softValues softValues} perform periodic
 * maintenance.
 *
 * 
The caches produced by {@code CacheBuilder} are serializable, and the org.testifyproject.testifyprojectserialized caches
 * retain all the configuration properties of the original cache. Note that the serialized form does
 * not include cache contents, but only configuration.
 *
 * 
See the Guava User Guide article on caching for a higher-level
 * explanation.
 *
 * @param  the base key type for all caches created by this builder
 * @param  the base value type for all caches created by this builder
 * @author Charles Fry
 * @author Kevin Bourrillion
 * @since 10.0
 */
@GwtCompatible(emulated = true)
public final class CacheBuilder {
  private static final int DEFAULT_INITIAL_CAPACITY = 16;
  private static final int DEFAULT_CONCURRENCY_LEVEL = 4;
  private static final int DEFAULT_EXPIRATION_NANOS = 0;
  private static final int DEFAULT_REFRESH_NANOS = 0;

  static final Supplier NULL_STATS_COUNTER = Suppliers.ofInstance(
      new StatsCounter() {
        @Override
        public void recordHits(int count) {}

        @Override
        public void recordMisses(int count) {}

        @Override
        public void recordLoadSuccess(long loadTime) {}

        @Override
        public void recordLoadException(long loadTime) {}

        @Override
        public void recordEviction() {}

        @Override
        public CacheStats snapshot() {
          return EMPTY_STATS;
        }
      });
  static final CacheStats EMPTY_STATS = new CacheStats(0, 0, 0, 0, 0, 0);

  static final Supplier CACHE_STATS_COUNTER =
      new Supplier() {
    @Override
    public StatsCounter get() {
      return new SimpleStatsCounter();
    }
  };

  enum NullListener implements RemovalListener {
    INSTANCE;

    @Override
    public void onRemoval(RemovalNotification notification) {}
  }

  enum OneWeigher implements Weigher {
    INSTANCE;

    @Override
    public int weigh(Object key, Object value) {
      return 1;
    }
  }

  static final Ticker NULL_TICKER = new Ticker() {
    @Override
    public long read() {
      return 0;
    }
  };

  private static final Logger logger = Logger.getLogger(CacheBuilder.class.getName());

  static final int UNSET_INT = -1;

  boolean strictParsing = true;

  int initialCapacity = UNSET_INT;
  int concurrencyLevel = UNSET_INT;
  long maximumSize = UNSET_INT;
  long maximumWeight = UNSET_INT;
  Weigher weigher;

  Strength keyStrength;
  Strength valueStrength;

  long expireAfterWriteNanos = UNSET_INT;
  long expireAfterAccessNanos = UNSET_INT;
  long refreshNanos = UNSET_INT;

  Equivalence keyEquivalence;
  Equivalence valueEquivalence;

  RemovalListener removalListener;
  Ticker ticker;

  Supplier statsCounterSupplier = NULL_STATS_COUNTER;

  // TODO(fry): make constructor private and update tests to use newBuilder
  CacheBuilder() {}

  /**
   * Constructs a new {@code CacheBuilder} instance with org.testifyproject.testifyprojectfault settings, including strong keys,
   * strong values, and no automatic eviction of any kind.
   */
  public static CacheBuilder newBuilder() {
    return new CacheBuilder();
  }

  /**
   * Constructs a new {@code CacheBuilder} instance with the settings specified in {@code spec}.
   *
   * @since 12.0
   */
  @Beta
  @GwtIncompatible("To be supported")
  public static CacheBuilder from(CacheBuilderSpec spec) {
    return spec.toCacheBuilder()
        .lenientParsing();
  }

  /**
   * Constructs a new {@code CacheBuilder} instance with the settings specified in {@code spec}.
   * This is especially useful for org.testifyproject.testifyprojectmand-line configuration of a {@code CacheBuilder}.
   *
   * @param spec a String in the format specified by {@link CacheBuilderSpec}
   * @since 12.0
   */
  @Beta
  @GwtIncompatible("To be supported")
  public static CacheBuilder from(String spec) {
    return from(CacheBuilderSpec.parse(spec));
  }

  /**
   * Enables lenient parsing. Useful for tests and spec parsing.
   */
  @GwtIncompatible("To be supported")
  CacheBuilder lenientParsing() {
    strictParsing = false;
    return this;
  }

  /**
   * Sets a custom {@code Equivalence} strategy for org.testifyproject.testifyprojectparing keys.
   *
   * 
By org.testifyproject.testifyprojectfault, the cache uses {@link Equivalence#identity} to org.testifyproject.testifyprojecttermine key equality when
   * {@link #weakKeys} is specified, and {@link Equivalence#equals()} otherwise.
   */
  @GwtIncompatible("To be supported")
  CacheBuilder keyEquivalence(Equivalence equivalence) {
    checkState(keyEquivalence == null, "key equivalence was already set to %s", keyEquivalence);
    keyEquivalence = checkNotNull(equivalence);
    return this;
  }

  Equivalence getKeyEquivalence() {
    return MoreObjects.firstNonNull(keyEquivalence, getKeyStrength().org.testifyproject.testifyprojectfaultEquivalence());
  }

  /**
   * Sets a custom {@code Equivalence} strategy for org.testifyproject.testifyprojectparing values.
   *
   * 
By org.testifyproject.testifyprojectfault, the cache uses {@link Equivalence#identity} to org.testifyproject.testifyprojecttermine value equality when
   * {@link #weakValues} or {@link #softValues} is specified, and {@link Equivalence#equals()}
   * otherwise.
   */
  @GwtIncompatible("To be supported")
  CacheBuilder valueEquivalence(Equivalence equivalence) {
    checkState(valueEquivalence == null,
        "value equivalence was already set to %s", valueEquivalence);
    this.valueEquivalence = checkNotNull(equivalence);
    return this;
  }

  Equivalence getValueEquivalence() {
    return MoreObjects.firstNonNull(valueEquivalence, getValueStrength().org.testifyproject.testifyprojectfaultEquivalence());
  }

  /**
   * Sets the minimum total size for the internal hash tables. For example, if the initial capacity
   * is {@code 60}, and the concurrency level is {@code 8}, then eight segments are created, each
   * having a hash table of size eight. Providing a large enough estimate at construction time
   * avoids the need for expensive resizing operations later, but setting this value unnecessarily
   * high wastes memory.
   *
   * @throws IllegalArgumentException if {@code initialCapacity} is negative
   * @throws IllegalStateException if an initial capacity was already set
   */
  public CacheBuilder initialCapacity(int initialCapacity) {
    checkState(this.initialCapacity == UNSET_INT, "initial capacity was already set to %s",
        this.initialCapacity);
    checkArgument(initialCapacity >= 0);
    this.initialCapacity = initialCapacity;
    return this;
  }

  int getInitialCapacity() {
    return (initialCapacity == UNSET_INT) ? DEFAULT_INITIAL_CAPACITY : initialCapacity;
  }

  /**
   * Guides the allowed concurrency among update operations. Used as a hint for internal sizing. The
   * table is internally partitioned to try to permit the indicated number of concurrent updates
   * without contention. Because assignment of entries to these partitions is not necessarily
   * uniform, the actual concurrency observed may vary. Ideally, you should choose a value to
   * accommodate as many threads as will ever concurrently modify the table. Using a significantly
   * higher value than you need can waste space and time, and a significantly lower value can lead
   * to thread contention. But overestimates and underestimates within an order of magnitude do not
   * usually have much noticeable impact. A value of one permits only one thread to modify the cache
   * at a time, but since read operations and cache loading org.testifyproject.testifyprojectputations can proceed concurrently,
   * this still yields higher concurrency than full synchronization.
   *
   * 
 Defaults to 4. Note:The org.testifyproject.testifyprojectfault may change in the future. If you care about this
   * value, you should always choose it explicitly.
   *
   * 
The current implementation uses the concurrency level to create a fixed number of hashtable
   * segments, each governed by its own write lock. The segment lock is taken once for each explicit
   * write, and twice for each cache loading org.testifyproject.testifyprojectputation (once prior to loading the new value,
   * and once after loading org.testifyproject.testifyprojectpletes). Much internal cache management is performed at the segment
   * granularity. For example, access queues and write queues are kept per segment when they are
   * required by the selected eviction algorithm. As such, when writing unit tests it is not
   * uncommon to specify {@code concurrencyLevel(1)} in order to achieve more org.testifyproject.testifyprojectterministic eviction
   * behavior.
   *
   * 
Note that future implementations may abandon segment locking in favor of more advanced
   * concurrency controls.
   *
   * @throws IllegalArgumentException if {@code concurrencyLevel} is nonpositive
   * @throws IllegalStateException if a concurrency level was already set
   */
  public CacheBuilder concurrencyLevel(int concurrencyLevel) {
    checkState(this.concurrencyLevel == UNSET_INT, "concurrency level was already set to %s",
        this.concurrencyLevel);
    checkArgument(concurrencyLevel > 0);
    this.concurrencyLevel = concurrencyLevel;
    return this;
  }

  int getConcurrencyLevel() {
    return (concurrencyLevel == UNSET_INT) ? DEFAULT_CONCURRENCY_LEVEL : concurrencyLevel;
  }

  /**
   * Specifies the maximum number of entries the cache may contain. Note that the cache may evict
   * an entry before this limit is exceeded. As the cache size grows close to the maximum, the
   * cache evicts entries that are less likely to be used again. For example, the cache may evict an
   * entry because it hasn't been used recently or very often.
   *
   * 
When {@code size} is zero, elements will be evicted immediately after being loaded into the
   * cache. This can be useful in testing, or to disable caching temporarily without a code change.
   *
   * 
This feature cannot be used in conjunction with {@link #maximumWeight}.
   *
   * @param size the maximum size of the cache
   * @throws IllegalArgumentException if {@code size} is negative
   * @throws IllegalStateException if a maximum size or weight was already set
   */
  public CacheBuilder maximumSize(long size) {
    checkState(this.maximumSize == UNSET_INT, "maximum size was already set to %s",
        this.maximumSize);
    checkState(this.maximumWeight == UNSET_INT, "maximum weight was already set to %s",
        this.maximumWeight);
    checkState(this.weigher == null, "maximum size can not be org.testifyproject.testifyprojectbined with weigher");
    checkArgument(size >= 0, "maximum size must not be negative");
    this.maximumSize = size;
    return this;
  }

  /**
   * Specifies the maximum weight of entries the cache may contain. Weight is org.testifyproject.testifyprojecttermined using the
   * {@link Weigher} specified with {@link #weigher}, and use of this method requires a
   * corresponding call to {@link #weigher} prior to calling {@link #build}.
   *
   * 
Note that the cache may evict an entry before this limit is exceeded. As the cache
   * size grows close to the maximum, the cache evicts entries that are less likely to be used
   * again. For example, the cache may evict an entry because it hasn't been used recently or very
   * often.
   *
   * 
When {@code weight} is zero, elements will be evicted immediately after being loaded into
   * cache. This can be useful in testing, or to disable caching temporarily without a code
   * change.
   *
   * 
Note that weight is only used to org.testifyproject.testifyprojecttermine whether the cache is over capacity; it has no
   * effect on selecting which entry should be evicted next.
   *
   * 
This feature cannot be used in conjunction with {@link #maximumSize}.
   *
   * @param weight the maximum total weight of entries the cache may contain
   * @throws IllegalArgumentException if {@code weight} is negative
   * @throws IllegalStateException if a maximum weight or size was already set
   * @since 11.0
   */
  @GwtIncompatible("To be supported")
  public CacheBuilder maximumWeight(long weight) {
    checkState(this.maximumWeight == UNSET_INT, "maximum weight was already set to %s",
        this.maximumWeight);
    checkState(this.maximumSize == UNSET_INT, "maximum size was already set to %s",
        this.maximumSize);
    this.maximumWeight = weight;
    checkArgument(weight >= 0, "maximum weight must not be negative");
    return this;
  }

  /**
   * Specifies the weigher to use in org.testifyproject.testifyprojecttermining the weight of entries. Entry weight is taken
   * into consideration by {@link #maximumWeight(long)} when org.testifyproject.testifyprojecttermining which entries to evict, and
   * use of this method requires a corresponding call to {@link #maximumWeight(long)} prior to
   * calling {@link #build}. Weights are measured and recorded when entries are inserted into the
   * cache, and are thus effectively static during the lifetime of a cache entry.
   *
   * 
When the weight of an entry is zero it will not be considered for size-based eviction
   * (though it still may be evicted by other means).
   *
   * 
Important note: Instead of returning this as a {@code CacheBuilder}
   * instance, this method returns {@code CacheBuilder}. From this point on, either the
   * original reference or the returned reference may be used to org.testifyproject.testifyprojectplete configuration and build
   * the cache, but only the "generic" one is type-safe. That is, it will properly prevent you from
   * building caches whose key or value types are incompatible with the types accepted by the
   * weigher already provided; the {@code CacheBuilder} type cannot do this. For best results,
   * simply use the standard method-chaining idiom, as illustrated in the documentation at top,
   * configuring a {@code CacheBuilder} and building your {@link Cache} all in a single statement.
   *
   * 
Warning: if you ignore the above advice, and use this {@code CacheBuilder} to build
   * a cache whose key or value type is incompatible with the weigher, you will likely experience
   * a {@link ClassCastException} at some undefined point in the future.
   *
   * @param weigher the weigher to use in calculating the weight of cache entries
   * @throws IllegalArgumentException if {@code size} is negative
   * @throws IllegalStateException if a maximum size was already set
   * @since 11.0
   */
  @GwtIncompatible("To be supported")
  public  CacheBuilder weigher(
      Weigher weigher) {
    checkState(this.weigher == null);
    if (strictParsing) {
      checkState(this.maximumSize == UNSET_INT, "weigher can not be org.testifyproject.testifyprojectbined with maximum size",
          this.maximumSize);
    }

    // safely limiting the kinds of caches this can produce
    @SuppressWarnings("unchecked")
    CacheBuilder me = (CacheBuilder) this;
    me.weigher = checkNotNull(weigher);
    return me;
  }

  long getMaximumWeight() {
    if (expireAfterWriteNanos == 0 || expireAfterAccessNanos == 0) {
      return 0;
    }
    return (weigher == null) ? maximumSize : maximumWeight;
  }

  // Make a safe contravariant cast now so we don't have to do it over and over.
  @SuppressWarnings("unchecked")
   Weigher getWeigher() {
    return (Weigher) MoreObjects.firstNonNull(weigher, OneWeigher.INSTANCE);
  }

  /**
   * Specifies that each key (not value) stored in the cache should be wrapped in a {@link
   * WeakReference} (by org.testifyproject.testifyprojectfault, strong references are used).
   *
   * 
Warning: when this method is used, the resulting cache will use identity ({@code ==})
   * org.testifyproject.testifyprojectparison to org.testifyproject.testifyprojecttermine equality of keys.
   *
   * 
Entries with keys that have been garbage collected may be counted in {@link Cache#size},
   * but will never be visible to read or write operations; such entries are cleaned up as part of
   * the routine maintenance org.testifyproject.testifyprojectscribed in the class javadoc.
   *
   * @throws IllegalStateException if the key strength was already set
   */
  @GwtIncompatible("java.lang.ref.WeakReference")
  public CacheBuilder weakKeys() {
    return setKeyStrength(Strength.WEAK);
  }

  CacheBuilder setKeyStrength(Strength strength) {
    checkState(keyStrength == null, "Key strength was already set to %s", keyStrength);
    keyStrength = checkNotNull(strength);
    return this;
  }

  Strength getKeyStrength() {
    return MoreObjects.firstNonNull(keyStrength, Strength.STRONG);
  }

  /**
   * Specifies that each value (not key) stored in the cache should be wrapped in a
   * {@link WeakReference} (by org.testifyproject.testifyprojectfault, strong references are used).
   *
   * 
Weak values will be garbage collected once they are weakly reachable. This makes them a poor
   * candidate for caching; consider {@link #softValues} instead.
   *
   * 
Note: when this method is used, the resulting cache will use identity ({@code ==})
   * org.testifyproject.testifyprojectparison to org.testifyproject.testifyprojecttermine equality of values.
   *
   * 
Entries with values that have been garbage collected may be counted in {@link Cache#size},
   * but will never be visible to read or write operations; such entries are cleaned up as part of
   * the routine maintenance org.testifyproject.testifyprojectscribed in the class javadoc.
   *
   * @throws IllegalStateException if the value strength was already set
   */
  @GwtIncompatible("java.lang.ref.WeakReference")
  public CacheBuilder weakValues() {
    return setValueStrength(Strength.WEAK);
  }

  /**
   * Specifies that each value (not key) stored in the cache should be wrapped in a
   * {@link SoftReference} (by org.testifyproject.testifyprojectfault, strong references are used). Softly-referenced objects will
   * be garbage-collected in a globally least-recently-used manner, in response to memory
   * org.testifyproject.testifyprojectmand.
   *
   * 
Warning: in most circumstances it is better to set a per-cache {@linkplain
   * #maximumSize(long) maximum size} instead of using soft references. You should only use this
   * method if you are well familiar with the practical consequences of soft references.
   *
   * 
Note: when this method is used, the resulting cache will use identity ({@code ==})
   * org.testifyproject.testifyprojectparison to org.testifyproject.testifyprojecttermine equality of values.
   *
   * 
Entries with values that have been garbage collected may be counted in {@link Cache#size},
   * but will never be visible to read or write operations; such entries are cleaned up as part of
   * the routine maintenance org.testifyproject.testifyprojectscribed in the class javadoc.
   *
   * @throws IllegalStateException if the value strength was already set
   */
  @GwtIncompatible("java.lang.ref.SoftReference")
  public CacheBuilder softValues() {
    return setValueStrength(Strength.SOFT);
  }

  CacheBuilder setValueStrength(Strength strength) {
    checkState(valueStrength == null, "Value strength was already set to %s", valueStrength);
    valueStrength = checkNotNull(strength);
    return this;
  }

  Strength getValueStrength() {
    return MoreObjects.firstNonNull(valueStrength, Strength.STRONG);
  }

  /**
   * Specifies that each entry should be automatically removed from the cache once a fixed duration
   * has elapsed after the entry's creation, or the most recent replacement of its value.
   *
   * 
When {@code duration} is zero, this method hands off to
   * {@link #maximumSize(long) maximumSize}{@code (0)}, ignoring any otherwise-specificed maximum
   * size or weight. This can be useful in testing, or to disable caching temporarily without a code
   * change.
   *
   * 
Expired entries may be counted in {@link Cache#size}, but will never be visible to read or
   * write operations. Expired entries are cleaned up as part of the routine maintenance org.testifyproject.testifyprojectscribed
   * in the class javadoc.
   *
   * @param duration the length of time after an entry is created that it should be automatically
   *     removed
   * @param unit the unit that {@code duration} is expressed in
   * @throws IllegalArgumentException if {@code duration} is negative
   * @throws IllegalStateException if the time to live or time to idle was already set
   */
  public CacheBuilder expireAfterWrite(long duration, TimeUnit unit) {
    checkState(expireAfterWriteNanos == UNSET_INT, "expireAfterWrite was already set to %s ns",
        expireAfterWriteNanos);
    checkArgument(duration >= 0, "duration cannot be negative: %s %s", duration, unit);
    this.expireAfterWriteNanos = unit.toNanos(duration);
    return this;
  }

  long getExpireAfterWriteNanos() {
    return (expireAfterWriteNanos == UNSET_INT) ? DEFAULT_EXPIRATION_NANOS : expireAfterWriteNanos;
  }

  /**
   * Specifies that each entry should be automatically removed from the cache once a fixed duration
   * has elapsed after the entry's creation, the most recent replacement of its value, or its last
   * access. Access time is reset by all cache read and write operations (including
   * {@code Cache.asMap().get(Object)} and {@code Cache.asMap().put(K, V)}), but not by operations
   * on the collection-views of {@link Cache#asMap}.
   *
   * 
When {@code duration} is zero, this method hands off to
   * {@link #maximumSize(long) maximumSize}{@code (0)}, ignoring any otherwise-specificed maximum
   * size or weight. This can be useful in testing, or to disable caching temporarily without a code
   * change.
   *
   * 
Expired entries may be counted in {@link Cache#size}, but will never be visible to read or
   * write operations. Expired entries are cleaned up as part of the routine maintenance org.testifyproject.testifyprojectscribed
   * in the class javadoc.
   *
   * @param duration the length of time after an entry is last accessed that it should be
   *     automatically removed
   * @param unit the unit that {@code duration} is expressed in
   * @throws IllegalArgumentException if {@code duration} is negative
   * @throws IllegalStateException if the time to idle or time to live was already set
   */
  public CacheBuilder expireAfterAccess(long duration, TimeUnit unit) {
    checkState(expireAfterAccessNanos == UNSET_INT, "expireAfterAccess was already set to %s ns",
        expireAfterAccessNanos);
    checkArgument(duration >= 0, "duration cannot be negative: %s %s", duration, unit);
    this.expireAfterAccessNanos = unit.toNanos(duration);
    return this;
  }

  long getExpireAfterAccessNanos() {
    return (expireAfterAccessNanos == UNSET_INT)
        ? DEFAULT_EXPIRATION_NANOS : expireAfterAccessNanos;
  }

  /**
   * Specifies that active entries are eligible for automatic refresh once a fixed duration has
   * elapsed after the entry's creation, or the most recent replacement of its value. The semantics
   * of refreshes are specified in {@link LoadingCache#refresh}, and are performed by calling
   * {@link CacheLoader#reload}.
   *
   * 
As the org.testifyproject.testifyprojectfault implementation of {@link CacheLoader#reload} is synchronous, it is
   * recommended that users of this method override {@link CacheLoader#reload} with an asynchronous
   * implementation; otherwise refreshes will be performed during unrelated cache read and write
   * operations.
   *
   * 
Currently automatic refreshes are performed when the first stale request for an entry
   * occurs. The request triggering refresh will make a blocking call to {@link CacheLoader#reload}
   * and immediately return the new value if the returned future is org.testifyproject.testifyprojectplete, and the old value
   * otherwise.
   *
   * 
Note: all exceptions thrown during refresh will be logged and then swallowed.
   *
   * @param duration the length of time after an entry is created that it should be considered
   *     stale, and thus eligible for refresh
   * @param unit the unit that {@code duration} is expressed in
   * @throws IllegalArgumentException if {@code duration} is negative
   * @throws IllegalStateException if the refresh interval was already set
   * @since 11.0
   */
  @Beta
  @GwtIncompatible("To be supported (synchronously).")
  public CacheBuilder refreshAfterWrite(long duration, TimeUnit unit) {
    checkNotNull(unit);
    checkState(refreshNanos == UNSET_INT, "refresh was already set to %s ns", refreshNanos);
    checkArgument(duration > 0, "duration must be positive: %s %s", duration, unit);
    this.refreshNanos = unit.toNanos(duration);
    return this;
  }

  long getRefreshNanos() {
    return (refreshNanos == UNSET_INT) ? DEFAULT_REFRESH_NANOS : refreshNanos;
  }

  /**
   * Specifies a nanosecond-precision time source for use in org.testifyproject.testifyprojecttermining when entries should be
   * expired. By org.testifyproject.testifyprojectfault, {@link System#nanoTime} is used.
   *
   * 
The primary intent of this method is to facilitate testing of caches which have been
   * configured with {@link #expireAfterWrite} or {@link #expireAfterAccess}.
   *
   * @throws IllegalStateException if a ticker was already set
   */
  public CacheBuilder ticker(Ticker ticker) {
    checkState(this.ticker == null);
    this.ticker = checkNotNull(ticker);
    return this;
  }

  Ticker getTicker(boolean recordsTime) {
    if (ticker != null) {
      return ticker;
    }
    return recordsTime ? Ticker.systemTicker() : NULL_TICKER;
  }

  /**
   * Specifies a listener instance that caches should notify each time an entry is removed for any
   * {@linkplain RemovalCause reason}. Each cache created by this builder will invoke this listener
   * as part of the routine maintenance org.testifyproject.testifyprojectscribed in the class documentation above.
   *
   * 
Warning: after invoking this method, do not continue to use this cache
   * builder reference; instead use the reference this method returns. At runtime, these
   * point to the same instance, but only the returned reference has the correct generic type
   * information so as to ensure type safety. For best results, use the standard method-chaining
   * idiom illustrated in the class documentation above, configuring a builder and building your
   * cache in a single statement. Failure to heed this advice can result in a {@link
   * ClassCastException} being thrown by a cache operation at some undefined point in the
   * future.
   *
   * 
Warning: any exception thrown by {@code listener} will not be propagated to
   * the {@code Cache} user, only logged via a {@link Logger}.
   *
   * @return the cache builder reference that should be used instead of {@code this} for any
   *     remaining configuration and cache building
   * @throws IllegalStateException if a removal listener was already set
   */
  @CheckReturnValue
  public  CacheBuilder removalListener(
      RemovalListener listener) {
    checkState(this.removalListener == null);

    // safely limiting the kinds of caches this can produce
    @SuppressWarnings("unchecked")
    CacheBuilder me = (CacheBuilder) this;
    me.removalListener = checkNotNull(listener);
    return me;
  }

  // Make a safe contravariant cast now so we don't have to do it over and over.
  @SuppressWarnings("unchecked")
   RemovalListener getRemovalListener() {
    return (RemovalListener)
        MoreObjects.firstNonNull(removalListener, NullListener.INSTANCE);
  }

  /**
   * Enable the accumulation of {@link CacheStats} during the operation of the cache. Without this
   * {@link Cache#stats} will return zero for all statistics. Note that recording stats requires
   * bookkeeping to be performed with each operation, and thus imposes a performance penalty on
   * cache operation.
   *
   * @since 12.0 (previously, stats collection was automatic)
   */
  public CacheBuilder recordStats() {
    statsCounterSupplier = CACHE_STATS_COUNTER;
    return this;
  }
  
  boolean isRecordingStats() {
    return statsCounterSupplier == CACHE_STATS_COUNTER;
  }

  Supplier getStatsCounterSupplier() {
    return statsCounterSupplier;
  }

  /**
   * Builds a cache, which either returns an already-loaded value for a given key or atomically
   * org.testifyproject.testifyprojectputes or retrieves it using the supplied {@code CacheLoader}. If another thread is currently
   * loading the value for this key, simply waits for that thread to finish and returns its
   * loaded value. Note that multiple threads can concurrently load values for distinct keys.
   *
   * 
This method does not alter the state of this {@code CacheBuilder} instance, so it can be
   * invoked again to create multiple independent caches.
   *
   * @param loader the cache loader used to obtain new values
   * @return a cache having the requested features
   */
  public  LoadingCache build(
      CacheLoader loader) {
    checkWeightWithWeigher();
    return new LocalCache.LocalLoadingCache(this, loader);
  }

  /**
   * Builds a cache which does not automatically load values when keys are requested.
   *
   * 
Consider {@link #build(CacheLoader)} instead, if it is feasible to implement a
   * {@code CacheLoader}.
   *
   * 
This method does not alter the state of this {@code CacheBuilder} instance, so it can be
   * invoked again to create multiple independent caches.
   *
   * @return a cache having the requested features
   * @since 11.0
   */
  public  Cache build() {
    checkWeightWithWeigher();
    checkNonLoadingCache();
    return new LocalCache.LocalManualCache(this);
  }

  private void checkNonLoadingCache() {
    checkState(refreshNanos == UNSET_INT, "refreshAfterWrite requires a LoadingCache");
  }

  private void checkWeightWithWeigher() {
    if (weigher == null) {
      checkState(maximumWeight == UNSET_INT, "maximumWeight requires weigher");
    } else {
      if (strictParsing) {
        checkState(maximumWeight != UNSET_INT, "weigher requires maximumWeight");
      } else {
        if (maximumWeight == UNSET_INT) {
          logger.log(Level.WARNING, "ignoring weigher specified without maximumWeight");
        }
      }
    }
  }

  /**
   * Returns a string representation for this CacheBuilder instance. The exact form of the returned
   * string is not specified.
   */
  @Override
  public String toString() {
    MoreObjects.ToStringHelper s = MoreObjects.toStringHelper(this);
    if (initialCapacity != UNSET_INT) {
      s.add("initialCapacity", initialCapacity);
    }
    if (concurrencyLevel != UNSET_INT) {
      s.add("concurrencyLevel", concurrencyLevel);
    }
    if (maximumSize != UNSET_INT) {
      s.add("maximumSize", maximumSize);
    }
    if (maximumWeight != UNSET_INT) {
      s.add("maximumWeight", maximumWeight);
    }
    if (expireAfterWriteNanos != UNSET_INT) {
      s.add("expireAfterWrite", expireAfterWriteNanos + "ns");
    }
    if (expireAfterAccessNanos != UNSET_INT) {
      s.add("expireAfterAccess", expireAfterAccessNanos + "ns");
    }
    if (keyStrength != null) {
      s.add("keyStrength", Ascii.toLowerCase(keyStrength.toString()));
    }
    if (valueStrength != null) {
      s.add("valueStrength", Ascii.toLowerCase(valueStrength.toString()));
    }
    if (keyEquivalence != null) {
      s.addValue("keyEquivalence");
    }
    if (valueEquivalence != null) {
      s.addValue("valueEquivalence");
    }
    if (removalListener != null) {
      s.addValue("removalListener");
    }
    return s.toString();
  }
}
    

    

    

                
 
            

    

                
 
            



    
    






    
© 2015 - 2024 Weber Informatics LLC | Privacy Policy