io.netty.handler.ssl.ReferenceCountedOpenSslEngine Maven / Gradle / Ivy
/*
* Copyright 2016 The Netty Project
*
* The Netty Project licenses this file to you under the Apache License,
* version 2.0 (the "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*/
package io.netty.handler.ssl;
import io.netty.buffer.ByteBuf;
import io.netty.buffer.ByteBufAllocator;
import io.netty.internal.tcnative.Buffer;
import io.netty.internal.tcnative.SSL;
import io.netty.util.AbstractReferenceCounted;
import io.netty.util.CharsetUtil;
import io.netty.util.ReferenceCounted;
import io.netty.util.ResourceLeakDetector;
import io.netty.util.ResourceLeakDetectorFactory;
import io.netty.util.ResourceLeakTracker;
import io.netty.util.internal.EmptyArrays;
import io.netty.util.internal.ObjectUtil;
import io.netty.util.internal.PlatformDependent;
import io.netty.util.internal.StringUtil;
import io.netty.util.internal.SuppressJava6Requirement;
import io.netty.util.internal.UnstableApi;
import io.netty.util.internal.logging.InternalLogger;
import io.netty.util.internal.logging.InternalLoggerFactory;
import java.nio.ByteBuffer;
import java.nio.ReadOnlyBufferException;
import java.security.Principal;
import java.security.cert.Certificate;
import java.util.ArrayList;
import java.util.Arrays;
import java.util.Collection;
import java.util.Collections;
import java.util.HashMap;
import java.util.LinkedHashSet;
import java.util.List;
import java.util.Map;
import java.util.Set;
import java.util.concurrent.locks.Lock;
import javax.crypto.spec.SecretKeySpec;
import javax.net.ssl.SSLEngine;
import javax.net.ssl.SSLEngineResult;
import javax.net.ssl.SSLException;
import javax.net.ssl.SSLHandshakeException;
import javax.net.ssl.SSLParameters;
import javax.net.ssl.SSLPeerUnverifiedException;
import javax.net.ssl.SSLSession;
import javax.net.ssl.SSLSessionBindingEvent;
import javax.net.ssl.SSLSessionBindingListener;
import javax.net.ssl.SSLSessionContext;
import javax.security.cert.X509Certificate;
import static io.netty.handler.ssl.OpenSsl.memoryAddress;
import static io.netty.handler.ssl.SslUtils.PROTOCOL_SSL_V2;
import static io.netty.handler.ssl.SslUtils.PROTOCOL_SSL_V2_HELLO;
import static io.netty.handler.ssl.SslUtils.PROTOCOL_SSL_V3;
import static io.netty.handler.ssl.SslUtils.PROTOCOL_TLS_V1;
import static io.netty.handler.ssl.SslUtils.PROTOCOL_TLS_V1_1;
import static io.netty.handler.ssl.SslUtils.PROTOCOL_TLS_V1_2;
import static io.netty.handler.ssl.SslUtils.PROTOCOL_TLS_V1_3;
import static io.netty.handler.ssl.SslUtils.SSL_RECORD_HEADER_LENGTH;
import static io.netty.util.internal.EmptyArrays.EMPTY_CERTIFICATES;
import static io.netty.util.internal.EmptyArrays.EMPTY_JAVAX_X509_CERTIFICATES;
import static io.netty.util.internal.ObjectUtil.checkNotNull;
import static java.lang.Integer.MAX_VALUE;
import static java.lang.Math.min;
import static javax.net.ssl.SSLEngineResult.HandshakeStatus.FINISHED;
import static javax.net.ssl.SSLEngineResult.HandshakeStatus.NEED_TASK;
import static javax.net.ssl.SSLEngineResult.HandshakeStatus.NEED_UNWRAP;
import static javax.net.ssl.SSLEngineResult.HandshakeStatus.NEED_WRAP;
import static javax.net.ssl.SSLEngineResult.HandshakeStatus.NOT_HANDSHAKING;
import static javax.net.ssl.SSLEngineResult.Status.BUFFER_OVERFLOW;
import static javax.net.ssl.SSLEngineResult.Status.BUFFER_UNDERFLOW;
import static javax.net.ssl.SSLEngineResult.Status.CLOSED;
import static javax.net.ssl.SSLEngineResult.Status.OK;
/**
* Implements a {@link SSLEngine} using
* OpenSSL BIO abstractions.
* Instances of this class must be {@link #release() released} or else native memory will leak!
*
*
Instances of this class must be released before the {@link ReferenceCountedOpenSslContext}
* the instance depends upon are released. Otherwise if any method of this class is called which uses the
* the {@link ReferenceCountedOpenSslContext} JNI resources the JVM may crash.
*/
public class ReferenceCountedOpenSslEngine extends SSLEngine implements ReferenceCounted, ApplicationProtocolAccessor {
private static final InternalLogger logger = InternalLoggerFactory.getInstance(ReferenceCountedOpenSslEngine.class);
private static final ResourceLeakDetector leakDetector =
ResourceLeakDetectorFactory.instance().newResourceLeakDetector(ReferenceCountedOpenSslEngine.class);
private static final int OPENSSL_OP_NO_PROTOCOL_INDEX_SSLV2 = 0;
private static final int OPENSSL_OP_NO_PROTOCOL_INDEX_SSLV3 = 1;
private static final int OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1 = 2;
private static final int OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_1 = 3;
private static final int OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_2 = 4;
private static final int OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_3 = 5;
private static final int[] OPENSSL_OP_NO_PROTOCOLS = {
SSL.SSL_OP_NO_SSLv2,
SSL.SSL_OP_NO_SSLv3,
SSL.SSL_OP_NO_TLSv1,
SSL.SSL_OP_NO_TLSv1_1,
SSL.SSL_OP_NO_TLSv1_2,
SSL.SSL_OP_NO_TLSv1_3
};
/**
* Depends upon tcnative ... only use if tcnative is available!
*/
static final int MAX_PLAINTEXT_LENGTH = SSL.SSL_MAX_PLAINTEXT_LENGTH;
/**
* Depends upon tcnative ... only use if tcnative is available!
*/
private static final int MAX_RECORD_SIZE = SSL.SSL_MAX_RECORD_LENGTH;
private static final SSLEngineResult NEED_UNWRAP_OK = new SSLEngineResult(OK, NEED_UNWRAP, 0, 0);
private static final SSLEngineResult NEED_UNWRAP_CLOSED = new SSLEngineResult(CLOSED, NEED_UNWRAP, 0, 0);
private static final SSLEngineResult NEED_WRAP_OK = new SSLEngineResult(OK, NEED_WRAP, 0, 0);
private static final SSLEngineResult NEED_WRAP_CLOSED = new SSLEngineResult(CLOSED, NEED_WRAP, 0, 0);
private static final SSLEngineResult CLOSED_NOT_HANDSHAKING = new SSLEngineResult(CLOSED, NOT_HANDSHAKING, 0, 0);
// OpenSSL state
private long ssl;
private long networkBIO;
private enum HandshakeState {
/**
* Not started yet.
*/
NOT_STARTED,
/**
* Started via unwrap/wrap.
*/
STARTED_IMPLICITLY,
/**
* Started via {@link #beginHandshake()}.
*/
STARTED_EXPLICITLY,
/**
* Handshake is finished.
*/
FINISHED
}
private HandshakeState handshakeState = HandshakeState.NOT_STARTED;
private boolean receivedShutdown;
private volatile boolean destroyed;
private volatile String applicationProtocol;
private volatile boolean needTask;
// Reference Counting
private final ResourceLeakTracker leak;
private final AbstractReferenceCounted refCnt = new AbstractReferenceCounted() {
@Override
public ReferenceCounted touch(Object hint) {
if (leak != null) {
leak.record(hint);
}
return ReferenceCountedOpenSslEngine.this;
}
@Override
protected void deallocate() {
shutdown();
if (leak != null) {
boolean closed = leak.close(ReferenceCountedOpenSslEngine.this);
assert closed;
}
parentContext.release();
}
};
private volatile ClientAuth clientAuth = ClientAuth.NONE;
private volatile Certificate[] localCertificateChain;
// Updated once a new handshake is started and so the SSLSession reused.
private volatile long lastAccessed = -1;
private String endPointIdentificationAlgorithm;
// Store as object as AlgorithmConstraints only exists since java 7.
private Object algorithmConstraints;
private List sniHostNames;
// Mark as volatile as accessed by checkSniHostnameMatch(...) and also not specify the SNIMatcher type to allow us
// using it with java7.
private volatile Collection matchers;
// SSL Engine status variables
private boolean isInboundDone;
private boolean outboundClosed;
final boolean jdkCompatibilityMode;
private final boolean clientMode;
final ByteBufAllocator alloc;
private final OpenSslEngineMap engineMap;
private final OpenSslApplicationProtocolNegotiator apn;
private final ReferenceCountedOpenSslContext parentContext;
private final OpenSslSession session;
private final ByteBuffer[] singleSrcBuffer = new ByteBuffer[1];
private final ByteBuffer[] singleDstBuffer = new ByteBuffer[1];
private final boolean enableOcsp;
private int maxWrapOverhead;
private int maxWrapBufferSize;
private Throwable handshakeException;
/**
* Create a new instance.
* @param context Reference count release responsibility is not transferred! The callee still owns this object.
* @param alloc The allocator to use.
* @param peerHost The peer host name.
* @param peerPort The peer port.
* @param jdkCompatibilityMode {@code true} to behave like described in
* https://docs.oracle.com/javase/7/docs/api/javax/net/ssl/SSLEngine.html.
* {@code false} allows for partial and/or multiple packets to be process in a single
* wrap or unwrap call.
* @param leakDetection {@code true} to enable leak detection of this object.
*/
ReferenceCountedOpenSslEngine(ReferenceCountedOpenSslContext context, final ByteBufAllocator alloc, String peerHost,
int peerPort, boolean jdkCompatibilityMode, boolean leakDetection) {
super(peerHost, peerPort);
OpenSsl.ensureAvailability();
this.alloc = checkNotNull(alloc, "alloc");
apn = (OpenSslApplicationProtocolNegotiator) context.applicationProtocolNegotiator();
clientMode = context.isClient();
if (PlatformDependent.javaVersion() >= 7) {
session = new ExtendedOpenSslSession(new DefaultOpenSslSession(context.sessionContext())) {
private String[] peerSupportedSignatureAlgorithms;
private List requestedServerNames;
@Override
public List getRequestedServerNames() {
if (clientMode) {
return Java8SslUtils.getSniHostNames(sniHostNames);
} else {
synchronized (ReferenceCountedOpenSslEngine.this) {
if (requestedServerNames == null) {
if (isDestroyed()) {
requestedServerNames = Collections.emptyList();
} else {
String name = SSL.getSniHostname(ssl);
if (name == null) {
requestedServerNames = Collections.emptyList();
} else {
// Convert to bytes as we do not want to do any strict validation of the
// SNIHostName while creating it.
requestedServerNames =
Java8SslUtils.getSniHostName(
SSL.getSniHostname(ssl).getBytes(CharsetUtil.UTF_8));
}
}
}
return requestedServerNames;
}
}
}
@Override
public String[] getPeerSupportedSignatureAlgorithms() {
synchronized (ReferenceCountedOpenSslEngine.this) {
if (peerSupportedSignatureAlgorithms == null) {
if (isDestroyed()) {
peerSupportedSignatureAlgorithms = EmptyArrays.EMPTY_STRINGS;
} else {
String[] algs = SSL.getSigAlgs(ssl);
if (algs == null) {
peerSupportedSignatureAlgorithms = EmptyArrays.EMPTY_STRINGS;
} else {
Set algorithmList = new LinkedHashSet(algs.length);
for (String alg: algs) {
String converted = SignatureAlgorithmConverter.toJavaName(alg);
if (converted != null) {
algorithmList.add(converted);
}
}
peerSupportedSignatureAlgorithms = algorithmList.toArray(new String[0]);
}
}
}
return peerSupportedSignatureAlgorithms.clone();
}
}
@Override
public List getStatusResponses() {
byte[] ocspResponse = null;
if (enableOcsp && clientMode) {
synchronized (ReferenceCountedOpenSslEngine.this) {
if (!isDestroyed()) {
ocspResponse = SSL.getOcspResponse(ssl);
}
}
}
return ocspResponse == null ?
Collections.emptyList() : Collections.singletonList(ocspResponse);
}
};
} else {
session = new DefaultOpenSslSession(context.sessionContext());
}
engineMap = context.engineMap;
enableOcsp = context.enableOcsp;
// context.keyCertChain will only be non-null if we do not use the KeyManagerFactory. In this case
// localCertificateChain will be set in setKeyMaterial(...).
localCertificateChain = context.keyCertChain;
this.jdkCompatibilityMode = jdkCompatibilityMode;
Lock readerLock = context.ctxLock.readLock();
readerLock.lock();
final long finalSsl;
try {
finalSsl = SSL.newSSL(context.ctx, !context.isClient());
} finally {
readerLock.unlock();
}
synchronized (this) {
ssl = finalSsl;
try {
networkBIO = SSL.bioNewByteBuffer(ssl, context.getBioNonApplicationBufferSize());
// Set the client auth mode, this needs to be done via setClientAuth(...) method so we actually call the
// needed JNI methods.
setClientAuth(clientMode ? ClientAuth.NONE : context.clientAuth);
if (context.protocols != null) {
setEnabledProtocols(context.protocols);
}
// Use SNI if peerHost was specified and a valid hostname
// See https://github.com/netty/netty/issues/4746
if (clientMode && SslUtils.isValidHostNameForSNI(peerHost)) {
SSL.setTlsExtHostName(ssl, peerHost);
sniHostNames = Collections.singletonList(peerHost);
}
if (enableOcsp) {
SSL.enableOcsp(ssl);
}
if (!jdkCompatibilityMode) {
SSL.setMode(ssl, SSL.getMode(ssl) | SSL.SSL_MODE_ENABLE_PARTIAL_WRITE);
}
// setMode may impact the overhead.
calculateMaxWrapOverhead();
} catch (Throwable cause) {
// Call shutdown so we are sure we correctly release all native memory and also guard against the
// case when shutdown() will be called by the finalizer again.
shutdown();
PlatformDependent.throwException(cause);
}
}
// Now that everything looks good and we're going to successfully return the
// object so we need to retain a reference to the parent context.
parentContext = context;
parentContext.retain();
// Only create the leak after everything else was executed and so ensure we don't produce a false-positive for
// the ResourceLeakDetector.
leak = leakDetection ? leakDetector.track(this) : null;
}
final synchronized String[] authMethods() {
if (isDestroyed()) {
return EmptyArrays.EMPTY_STRINGS;
}
return SSL.authenticationMethods(ssl);
}
final boolean setKeyMaterial(OpenSslKeyMaterial keyMaterial) throws Exception {
synchronized (this) {
if (isDestroyed()) {
return false;
}
SSL.setKeyMaterial(ssl, keyMaterial.certificateChainAddress(), keyMaterial.privateKeyAddress());
}
localCertificateChain = keyMaterial.certificateChain();
return true;
}
final synchronized SecretKeySpec masterKey() {
if (isDestroyed()) {
return null;
}
return new SecretKeySpec(SSL.getMasterKey(ssl), "AES");
}
/**
* Sets the OCSP response.
*/
@UnstableApi
public void setOcspResponse(byte[] response) {
if (!enableOcsp) {
throw new IllegalStateException("OCSP stapling is not enabled");
}
if (clientMode) {
throw new IllegalStateException("Not a server SSLEngine");
}
synchronized (this) {
if (!isDestroyed()) {
SSL.setOcspResponse(ssl, response);
}
}
}
/**
* Returns the OCSP response or {@code null} if the server didn't provide a stapled OCSP response.
*/
@UnstableApi
public byte[] getOcspResponse() {
if (!enableOcsp) {
throw new IllegalStateException("OCSP stapling is not enabled");
}
if (!clientMode) {
throw new IllegalStateException("Not a client SSLEngine");
}
synchronized (this) {
if (isDestroyed()) {
return EmptyArrays.EMPTY_BYTES;
}
return SSL.getOcspResponse(ssl);
}
}
@Override
public final int refCnt() {
return refCnt.refCnt();
}
@Override
public final ReferenceCounted retain() {
refCnt.retain();
return this;
}
@Override
public final ReferenceCounted retain(int increment) {
refCnt.retain(increment);
return this;
}
@Override
public final ReferenceCounted touch() {
refCnt.touch();
return this;
}
@Override
public final ReferenceCounted touch(Object hint) {
refCnt.touch(hint);
return this;
}
@Override
public final boolean release() {
return refCnt.release();
}
@Override
public final boolean release(int decrement) {
return refCnt.release(decrement);
}
@Override
public final synchronized SSLSession getHandshakeSession() {
// Javadocs state return value should be:
// null if this instance is not currently handshaking, or if the current handshake has not
// progressed far enough to create a basic SSLSession. Otherwise, this method returns the
// SSLSession currently being negotiated.
switch(handshakeState) {
case NOT_STARTED:
case FINISHED:
return null;
default:
return session;
}
}
/**
* Returns the pointer to the {@code SSL} object for this {@link ReferenceCountedOpenSslEngine}.
* Be aware that it is freed as soon as the {@link #release()} or {@link #shutdown()} methods are called.
* At this point {@code 0} will be returned.
*/
public final synchronized long sslPointer() {
return ssl;
}
/**
* Destroys this engine.
*/
public final synchronized void shutdown() {
if (!destroyed) {
destroyed = true;
engineMap.remove(ssl);
SSL.freeSSL(ssl);
ssl = networkBIO = 0;
isInboundDone = outboundClosed = true;
}
// On shutdown clear all errors
SSL.clearError();
}
/**
* Write plaintext data to the OpenSSL internal BIO
*
* Calling this function with src.remaining == 0 is undefined.
*/
private int writePlaintextData(final ByteBuffer src, int len) {
final int pos = src.position();
final int limit = src.limit();
final int sslWrote;
if (src.isDirect()) {
sslWrote = SSL.writeToSSL(ssl, bufferAddress(src) + pos, len);
if (sslWrote > 0) {
src.position(pos + sslWrote);
}
} else {
ByteBuf buf = alloc.directBuffer(len);
try {
src.limit(pos + len);
buf.setBytes(0, src);
src.limit(limit);
sslWrote = SSL.writeToSSL(ssl, memoryAddress(buf), len);
if (sslWrote > 0) {
src.position(pos + sslWrote);
} else {
src.position(pos);
}
} finally {
buf.release();
}
}
return sslWrote;
}
/**
* Write encrypted data to the OpenSSL network BIO.
*/
private ByteBuf writeEncryptedData(final ByteBuffer src, int len) {
final int pos = src.position();
if (src.isDirect()) {
SSL.bioSetByteBuffer(networkBIO, bufferAddress(src) + pos, len, false);
} else {
final ByteBuf buf = alloc.directBuffer(len);
try {
final int limit = src.limit();
src.limit(pos + len);
buf.writeBytes(src);
// Restore the original position and limit because we don't want to consume from `src`.
src.position(pos);
src.limit(limit);
SSL.bioSetByteBuffer(networkBIO, memoryAddress(buf), len, false);
return buf;
} catch (Throwable cause) {
buf.release();
PlatformDependent.throwException(cause);
}
}
return null;
}
/**
* Read plaintext data from the OpenSSL internal BIO
*/
private int readPlaintextData(final ByteBuffer dst) {
final int sslRead;
final int pos = dst.position();
if (dst.isDirect()) {
sslRead = SSL.readFromSSL(ssl, bufferAddress(dst) + pos, dst.limit() - pos);
if (sslRead > 0) {
dst.position(pos + sslRead);
}
} else {
final int limit = dst.limit();
final int len = min(maxEncryptedPacketLength0(), limit - pos);
final ByteBuf buf = alloc.directBuffer(len);
try {
sslRead = SSL.readFromSSL(ssl, memoryAddress(buf), len);
if (sslRead > 0) {
dst.limit(pos + sslRead);
buf.getBytes(buf.readerIndex(), dst);
dst.limit(limit);
}
} finally {
buf.release();
}
}
return sslRead;
}
/**
* Visible only for testing!
*/
final synchronized int maxWrapOverhead() {
return maxWrapOverhead;
}
/**
* Visible only for testing!
*/
final synchronized int maxEncryptedPacketLength() {
return maxEncryptedPacketLength0();
}
/**
* This method is intentionally not synchronized, only use if you know you are in the EventLoop
* thread and visibility on {@link #maxWrapOverhead} is achieved via other synchronized blocks.
*/
final int maxEncryptedPacketLength0() {
return maxWrapOverhead + MAX_PLAINTEXT_LENGTH;
}
/**
* This method is intentionally not synchronized, only use if you know you are in the EventLoop
* thread and visibility on {@link #maxWrapBufferSize} and {@link #maxWrapOverhead} is achieved
* via other synchronized blocks.
*/
final int calculateMaxLengthForWrap(int plaintextLength, int numComponents) {
return (int) min(maxWrapBufferSize, plaintextLength + (long) maxWrapOverhead * numComponents);
}
final synchronized int sslPending() {
return sslPending0();
}
/**
* It is assumed this method is called in a synchronized block (or the constructor)!
*/
private void calculateMaxWrapOverhead() {
maxWrapOverhead = SSL.getMaxWrapOverhead(ssl);
// maxWrapBufferSize must be set after maxWrapOverhead because there is a dependency on this value.
// If jdkCompatibility mode is off we allow enough space to encrypt 16 buffers at a time. This could be
// configurable in the future if necessary.
maxWrapBufferSize = jdkCompatibilityMode ? maxEncryptedPacketLength0() : maxEncryptedPacketLength0() << 4;
}
private int sslPending0() {
// OpenSSL has a limitation where if you call SSL_pending before the handshake is complete OpenSSL will throw a
// "called a function you should not call" error. Using the TLS_method instead of SSLv23_method may solve this
// issue but this API is only available in 1.1.0+ [1].
// [1] https://www.openssl.org/docs/man1.1.0/ssl/SSL_CTX_new.html
return handshakeState != HandshakeState.FINISHED ? 0 : SSL.sslPending(ssl);
}
private boolean isBytesAvailableEnoughForWrap(int bytesAvailable, int plaintextLength, int numComponents) {
return bytesAvailable - (long) maxWrapOverhead * numComponents >= plaintextLength;
}
@Override
public final SSLEngineResult wrap(
final ByteBuffer[] srcs, int offset, final int length, final ByteBuffer dst) throws SSLException {
// Throw required runtime exceptions
if (srcs == null) {
throw new IllegalArgumentException("srcs is null");
}
if (dst == null) {
throw new IllegalArgumentException("dst is null");
}
if (offset >= srcs.length || offset + length > srcs.length) {
throw new IndexOutOfBoundsException(
"offset: " + offset + ", length: " + length +
" (expected: offset <= offset + length <= srcs.length (" + srcs.length + "))");
}
if (dst.isReadOnly()) {
throw new ReadOnlyBufferException();
}
synchronized (this) {
if (isOutboundDone()) {
// All drained in the outbound buffer
return isInboundDone() || isDestroyed() ? CLOSED_NOT_HANDSHAKING : NEED_UNWRAP_CLOSED;
}
int bytesProduced = 0;
ByteBuf bioReadCopyBuf = null;
try {
// Setup the BIO buffer so that we directly write the encryption results into dst.
if (dst.isDirect()) {
SSL.bioSetByteBuffer(networkBIO, bufferAddress(dst) + dst.position(), dst.remaining(),
true);
} else {
bioReadCopyBuf = alloc.directBuffer(dst.remaining());
SSL.bioSetByteBuffer(networkBIO, memoryAddress(bioReadCopyBuf), bioReadCopyBuf.writableBytes(),
true);
}
int bioLengthBefore = SSL.bioLengthByteBuffer(networkBIO);
// Explicitly use outboundClosed as we want to drain any bytes that are still present.
if (outboundClosed) {
// If the outbound was closed we want to ensure we can produce the alert to the destination buffer.
// This is true even if we not using jdkCompatibilityMode.
//
// We use a plaintextLength of 2 as we at least want to have an alert fit into it.
// https://tools.ietf.org/html/rfc5246#section-7.2
if (!isBytesAvailableEnoughForWrap(dst.remaining(), 2, 1)) {
return new SSLEngineResult(BUFFER_OVERFLOW, getHandshakeStatus(), 0, 0);
}
// There is something left to drain.
// See https://github.com/netty/netty/issues/6260
bytesProduced = SSL.bioFlushByteBuffer(networkBIO);
if (bytesProduced <= 0) {
return newResultMayFinishHandshake(NOT_HANDSHAKING, 0, 0);
}
// It is possible when the outbound was closed there was not enough room in the non-application
// buffers to hold the close_notify. We should keep trying to close until we consume all the data
// OpenSSL can give us.
if (!doSSLShutdown()) {
return newResultMayFinishHandshake(NOT_HANDSHAKING, 0, bytesProduced);
}
bytesProduced = bioLengthBefore - SSL.bioLengthByteBuffer(networkBIO);
return newResultMayFinishHandshake(NEED_WRAP, 0, bytesProduced);
}
// Flush any data that may be implicitly generated by OpenSSL (handshake, close, etc..).
SSLEngineResult.HandshakeStatus status = NOT_HANDSHAKING;
// Prepare OpenSSL to work in server mode and receive handshake
if (handshakeState != HandshakeState.FINISHED) {
if (handshakeState != HandshakeState.STARTED_EXPLICITLY) {
// Update accepted so we know we triggered the handshake via wrap
handshakeState = HandshakeState.STARTED_IMPLICITLY;
}
// Flush any data that may have been written implicitly during the handshake by OpenSSL.
bytesProduced = SSL.bioFlushByteBuffer(networkBIO);
if (handshakeException != null) {
// TODO(scott): It is possible that when the handshake failed there was not enough room in the
// non-application buffers to hold the alert. We should get all the data before progressing on.
// However I'm not aware of a way to do this with the OpenSSL APIs.
// See https://github.com/netty/netty/issues/6385.
// We produced / consumed some data during the handshake, signal back to the caller.
// If there is a handshake exception and we have produced data, we should send the data before
// we allow handshake() to throw the handshake exception.
//
// When the user calls wrap() again we will propagate the handshake error back to the user as
// soon as there is no more data to was produced (as part of an alert etc).
if (bytesProduced > 0) {
return newResult(NEED_WRAP, 0, bytesProduced);
}
// Nothing was produced see if there is a handshakeException that needs to be propagated
// to the caller by calling handshakeException() which will return the right HandshakeStatus
// if it can "recover" from the exception for now.
return newResult(handshakeException(), 0, 0);
}
status = handshake();
// Handshake may have generated more data, for example if the internal SSL buffer is small
// we may have freed up space by flushing above.
bytesProduced = bioLengthBefore - SSL.bioLengthByteBuffer(networkBIO);
if (status == NEED_TASK) {
return newResult(status, 0, bytesProduced);
}
if (bytesProduced > 0) {
// If we have filled up the dst buffer and we have not finished the handshake we should try to
// wrap again. Otherwise we should only try to wrap again if there is still data pending in
// SSL buffers.
return newResult(mayFinishHandshake(status != FINISHED ?
bytesProduced == bioLengthBefore ? NEED_WRAP :
getHandshakeStatus(SSL.bioLengthNonApplication(networkBIO)) : FINISHED),
0, bytesProduced);
}
if (status == NEED_UNWRAP) {
// Signal if the outbound is done or not.
return isOutboundDone() ? NEED_UNWRAP_CLOSED : NEED_UNWRAP_OK;
}
// Explicit use outboundClosed and not outboundClosed() as we want to drain any bytes that are
// still present.
if (outboundClosed) {
bytesProduced = SSL.bioFlushByteBuffer(networkBIO);
return newResultMayFinishHandshake(status, 0, bytesProduced);
}
}
final int endOffset = offset + length;
if (jdkCompatibilityMode) {
int srcsLen = 0;
for (int i = offset; i < endOffset; ++i) {
final ByteBuffer src = srcs[i];
if (src == null) {
throw new IllegalArgumentException("srcs[" + i + "] is null");
}
if (srcsLen == MAX_PLAINTEXT_LENGTH) {
continue;
}
srcsLen += src.remaining();
if (srcsLen > MAX_PLAINTEXT_LENGTH || srcsLen < 0) {
// If srcLen > MAX_PLAINTEXT_LENGTH or secLen < 0 just set it to MAX_PLAINTEXT_LENGTH.
// This also help us to guard against overflow.
// We not break out here as we still need to check for null entries in srcs[].
srcsLen = MAX_PLAINTEXT_LENGTH;
}
}
// jdkCompatibilityMode will only produce a single TLS packet, and we don't aggregate src buffers,
// so we always fix the number of buffers to 1 when checking if the dst buffer is large enough.
if (!isBytesAvailableEnoughForWrap(dst.remaining(), srcsLen, 1)) {
return new SSLEngineResult(BUFFER_OVERFLOW, getHandshakeStatus(), 0, 0);
}
}
// There was no pending data in the network BIO -- encrypt any application data
int bytesConsumed = 0;
// Flush any data that may have been written implicitly by OpenSSL in case a shutdown/alert occurs.
bytesProduced = SSL.bioFlushByteBuffer(networkBIO);
for (; offset < endOffset; ++offset) {
final ByteBuffer src = srcs[offset];
final int remaining = src.remaining();
if (remaining == 0) {
continue;
}
final int bytesWritten;
if (jdkCompatibilityMode) {
// Write plaintext application data to the SSL engine. We don't have to worry about checking
// if there is enough space if jdkCompatibilityMode because we only wrap at most
// MAX_PLAINTEXT_LENGTH and we loop over the input before hand and check if there is space.
bytesWritten = writePlaintextData(src, min(remaining, MAX_PLAINTEXT_LENGTH - bytesConsumed));
} else {
// OpenSSL's SSL_write keeps state between calls. We should make sure the amount we attempt to
// write is guaranteed to succeed so we don't have to worry about keeping state consistent
// between calls.
final int availableCapacityForWrap = dst.remaining() - bytesProduced - maxWrapOverhead;
if (availableCapacityForWrap <= 0) {
return new SSLEngineResult(BUFFER_OVERFLOW, getHandshakeStatus(), bytesConsumed,
bytesProduced);
}
bytesWritten = writePlaintextData(src, min(remaining, availableCapacityForWrap));
}
if (bytesWritten > 0) {
bytesConsumed += bytesWritten;
// Determine how much encrypted data was generated:
final int pendingNow = SSL.bioLengthByteBuffer(networkBIO);
bytesProduced += bioLengthBefore - pendingNow;
bioLengthBefore = pendingNow;
if (jdkCompatibilityMode || bytesProduced == dst.remaining()) {
return newResultMayFinishHandshake(status, bytesConsumed, bytesProduced);
}
} else {
int sslError = SSL.getError(ssl, bytesWritten);
if (sslError == SSL.SSL_ERROR_ZERO_RETURN) {
// This means the connection was shutdown correctly, close inbound and outbound
if (!receivedShutdown) {
closeAll();
bytesProduced += bioLengthBefore - SSL.bioLengthByteBuffer(networkBIO);
// If we have filled up the dst buffer and we have not finished the handshake we should
// try to wrap again. Otherwise we should only try to wrap again if there is still data
// pending in SSL buffers.
SSLEngineResult.HandshakeStatus hs = mayFinishHandshake(
status != FINISHED ? bytesProduced == dst.remaining() ? NEED_WRAP
: getHandshakeStatus(SSL.bioLengthNonApplication(networkBIO))
: FINISHED);
return newResult(hs, bytesConsumed, bytesProduced);
}
return newResult(NOT_HANDSHAKING, bytesConsumed, bytesProduced);
} else if (sslError == SSL.SSL_ERROR_WANT_READ) {
// If there is no pending data to read from BIO we should go back to event loop and try
// to read more data [1]. It is also possible that event loop will detect the socket has
// been closed. [1] https://www.openssl.org/docs/manmaster/ssl/SSL_write.html
return newResult(NEED_UNWRAP, bytesConsumed, bytesProduced);
} else if (sslError == SSL.SSL_ERROR_WANT_WRITE) {
// SSL_ERROR_WANT_WRITE typically means that the underlying transport is not writable
// and we should set the "want write" flag on the selector and try again when the
// underlying transport is writable [1]. However we are not directly writing to the
// underlying transport and instead writing to a BIO buffer. The OpenSsl documentation
// says we should do the following [1]:
//
// "When using a buffering BIO, like a BIO pair, data must be written into or retrieved
// out of the BIO before being able to continue."
//
// In practice this means the destination buffer doesn't have enough space for OpenSSL
// to write encrypted data to. This is an OVERFLOW condition.
// [1] https://www.openssl.org/docs/manmaster/ssl/SSL_write.html
return newResult(BUFFER_OVERFLOW, status, bytesConsumed, bytesProduced);
} else if (sslError == SSL.SSL_ERROR_WANT_X509_LOOKUP ||
sslError == SSL.SSL_ERROR_WANT_CERTIFICATE_VERIFY ||
sslError == SSL.SSL_ERROR_WANT_PRIVATE_KEY_OPERATION) {
return newResult(NEED_TASK, bytesConsumed, bytesProduced);
} else {
// Everything else is considered as error
throw shutdownWithError("SSL_write", sslError);
}
}
}
return newResultMayFinishHandshake(status, bytesConsumed, bytesProduced);
} finally {
SSL.bioClearByteBuffer(networkBIO);
if (bioReadCopyBuf == null) {
dst.position(dst.position() + bytesProduced);
} else {
assert bioReadCopyBuf.readableBytes() <= dst.remaining() : "The destination buffer " + dst +
" didn't have enough remaining space to hold the encrypted content in " + bioReadCopyBuf;
dst.put(bioReadCopyBuf.internalNioBuffer(bioReadCopyBuf.readerIndex(), bytesProduced));
bioReadCopyBuf.release();
}
}
}
}
private SSLEngineResult newResult(SSLEngineResult.HandshakeStatus hs, int bytesConsumed, int bytesProduced) {
return newResult(OK, hs, bytesConsumed, bytesProduced);
}
private SSLEngineResult newResult(SSLEngineResult.Status status, SSLEngineResult.HandshakeStatus hs,
int bytesConsumed, int bytesProduced) {
// If isOutboundDone, then the data from the network BIO
// was the close_notify message and all was consumed we are not required to wait
// for the receipt the peer's close_notify message -- shutdown.
if (isOutboundDone()) {
if (isInboundDone()) {
// If the inbound was done as well, we need to ensure we return NOT_HANDSHAKING to signal we are done.
hs = NOT_HANDSHAKING;
// As the inbound and the outbound is done we can shutdown the engine now.
shutdown();
}
return new SSLEngineResult(CLOSED, hs, bytesConsumed, bytesProduced);
}
if (hs == NEED_TASK) {
// Set needTask to true so getHandshakeStatus() will return the correct value.
needTask = true;
}
return new SSLEngineResult(status, hs, bytesConsumed, bytesProduced);
}
private SSLEngineResult newResultMayFinishHandshake(SSLEngineResult.HandshakeStatus hs,
int bytesConsumed, int bytesProduced) throws SSLException {
return newResult(mayFinishHandshake(hs != FINISHED ? getHandshakeStatus() : FINISHED),
bytesConsumed, bytesProduced);
}
private SSLEngineResult newResultMayFinishHandshake(SSLEngineResult.Status status,
SSLEngineResult.HandshakeStatus hs,
int bytesConsumed, int bytesProduced) throws SSLException {
return newResult(status, mayFinishHandshake(hs != FINISHED ? getHandshakeStatus() : FINISHED),
bytesConsumed, bytesProduced);
}
/**
* Log the error, shutdown the engine and throw an exception.
*/
private SSLException shutdownWithError(String operations, int sslError) {
return shutdownWithError(operations, sslError, SSL.getLastErrorNumber());
}
private SSLException shutdownWithError(String operation, int sslError, int error) {
String errorString = SSL.getErrorString(error);
if (logger.isDebugEnabled()) {
logger.debug("{} failed with {}: OpenSSL error: {} {}",
operation, sslError, error, errorString);
}
// There was an internal error -- shutdown
shutdown();
if (handshakeState == HandshakeState.FINISHED) {
return new SSLException(errorString);
}
SSLHandshakeException exception = new SSLHandshakeException(errorString);
// If we have a handshakeException stored already we should include it as well to help the user debug things.
if (handshakeException != null) {
exception.initCause(handshakeException);
handshakeException = null;
}
return exception;
}
public final SSLEngineResult unwrap(
final ByteBuffer[] srcs, int srcsOffset, final int srcsLength,
final ByteBuffer[] dsts, int dstsOffset, final int dstsLength) throws SSLException {
// Throw required runtime exceptions
ObjectUtil.checkNotNull(srcs, "srcs");
if (srcsOffset >= srcs.length
|| srcsOffset + srcsLength > srcs.length) {
throw new IndexOutOfBoundsException(
"offset: " + srcsOffset + ", length: " + srcsLength +
" (expected: offset <= offset + length <= srcs.length (" + srcs.length + "))");
}
if (dsts == null) {
throw new IllegalArgumentException("dsts is null");
}
if (dstsOffset >= dsts.length || dstsOffset + dstsLength > dsts.length) {
throw new IndexOutOfBoundsException(
"offset: " + dstsOffset + ", length: " + dstsLength +
" (expected: offset <= offset + length <= dsts.length (" + dsts.length + "))");
}
long capacity = 0;
final int dstsEndOffset = dstsOffset + dstsLength;
for (int i = dstsOffset; i < dstsEndOffset; i ++) {
ByteBuffer dst = dsts[i];
if (dst == null) {
throw new IllegalArgumentException("dsts[" + i + "] is null");
}
if (dst.isReadOnly()) {
throw new ReadOnlyBufferException();
}
capacity += dst.remaining();
}
final int srcsEndOffset = srcsOffset + srcsLength;
long len = 0;
for (int i = srcsOffset; i < srcsEndOffset; i++) {
ByteBuffer src = srcs[i];
if (src == null) {
throw new IllegalArgumentException("srcs[" + i + "] is null");
}
len += src.remaining();
}
synchronized (this) {
if (isInboundDone()) {
return isOutboundDone() || isDestroyed() ? CLOSED_NOT_HANDSHAKING : NEED_WRAP_CLOSED;
}
SSLEngineResult.HandshakeStatus status = NOT_HANDSHAKING;
// Prepare OpenSSL to work in server mode and receive handshake
if (handshakeState != HandshakeState.FINISHED) {
if (handshakeState != HandshakeState.STARTED_EXPLICITLY) {
// Update accepted so we know we triggered the handshake via wrap
handshakeState = HandshakeState.STARTED_IMPLICITLY;
}
status = handshake();
if (status == NEED_TASK) {
return newResult(status, 0, 0);
}
if (status == NEED_WRAP) {
return NEED_WRAP_OK;
}
// Check if the inbound is considered to be closed if so let us try to wrap again.
if (isInboundDone) {
return NEED_WRAP_CLOSED;
}
}
int sslPending = sslPending0();
int packetLength;
// The JDK implies that only a single SSL packet should be processed per unwrap call [1]. If we are in
// JDK compatibility mode then we should honor this, but if not we just wrap as much as possible. If there
// are multiple records or partial records this may reduce thrashing events through the pipeline.
// [1] https://docs.oracle.com/javase/7/docs/api/javax/net/ssl/SSLEngine.html
if (jdkCompatibilityMode) {
if (len < SSL_RECORD_HEADER_LENGTH) {
return newResultMayFinishHandshake(BUFFER_UNDERFLOW, status, 0, 0);
}
packetLength = SslUtils.getEncryptedPacketLength(srcs, srcsOffset);
if (packetLength == SslUtils.NOT_ENCRYPTED) {
throw new NotSslRecordException("not an SSL/TLS record");
}
final int packetLengthDataOnly = packetLength - SSL_RECORD_HEADER_LENGTH;
if (packetLengthDataOnly > capacity) {
// Not enough space in the destination buffer so signal the caller that the buffer needs to be
// increased.
if (packetLengthDataOnly > MAX_RECORD_SIZE) {
// The packet length MUST NOT exceed 2^14 [1]. However we do accommodate more data to support
// legacy use cases which may violate this condition (e.g. OpenJDK's SslEngineImpl). If the max
// length is exceeded we fail fast here to avoid an infinite loop due to the fact that we
// won't allocate a buffer large enough.
// [1] https://tools.ietf.org/html/rfc5246#section-6.2.1
throw new SSLException("Illegal packet length: " + packetLengthDataOnly + " > " +
session.getApplicationBufferSize());
} else {
session.tryExpandApplicationBufferSize(packetLengthDataOnly);
}
return newResultMayFinishHandshake(BUFFER_OVERFLOW, status, 0, 0);
}
if (len < packetLength) {
// We either don't have enough data to read the packet length or not enough for reading the whole
// packet.
return newResultMayFinishHandshake(BUFFER_UNDERFLOW, status, 0, 0);
}
} else if (len == 0 && sslPending <= 0) {
return newResultMayFinishHandshake(BUFFER_UNDERFLOW, status, 0, 0);
} else if (capacity == 0) {
return newResultMayFinishHandshake(BUFFER_OVERFLOW, status, 0, 0);
} else {
packetLength = (int) min(MAX_VALUE, len);
}
// This must always be the case when we reached here as if not we returned BUFFER_UNDERFLOW.
assert srcsOffset < srcsEndOffset;
// This must always be the case if we reached here.
assert capacity > 0;
// Number of produced bytes
int bytesProduced = 0;
int bytesConsumed = 0;
try {
srcLoop:
for (;;) {
ByteBuffer src = srcs[srcsOffset];
int remaining = src.remaining();
final ByteBuf bioWriteCopyBuf;
int pendingEncryptedBytes;
if (remaining == 0) {
if (sslPending <= 0) {
// We must skip empty buffers as BIO_write will return 0 if asked to write something
// with length 0.
if (++srcsOffset >= srcsEndOffset) {
break;
}
continue;
} else {
bioWriteCopyBuf = null;
pendingEncryptedBytes = SSL.bioLengthByteBuffer(networkBIO);
}
} else {
// Write more encrypted data into the BIO. Ensure we only read one packet at a time as
// stated in the SSLEngine javadocs.
pendingEncryptedBytes = min(packetLength, remaining);
bioWriteCopyBuf = writeEncryptedData(src, pendingEncryptedBytes);
}
try {
for (;;) {
ByteBuffer dst = dsts[dstsOffset];
if (!dst.hasRemaining()) {
// No space left in the destination buffer, skip it.
if (++dstsOffset >= dstsEndOffset) {
break srcLoop;
}
continue;
}
int bytesRead = readPlaintextData(dst);
// We are directly using the ByteBuffer memory for the write, and so we only know what has
// been consumed after we let SSL decrypt the data. At this point we should update the
// number of bytes consumed, update the ByteBuffer position, and release temp ByteBuf.
int localBytesConsumed = pendingEncryptedBytes - SSL.bioLengthByteBuffer(networkBIO);
bytesConsumed += localBytesConsumed;
packetLength -= localBytesConsumed;
pendingEncryptedBytes -= localBytesConsumed;
src.position(src.position() + localBytesConsumed);
if (bytesRead > 0) {
bytesProduced += bytesRead;
if (!dst.hasRemaining()) {
sslPending = sslPending0();
// Move to the next dst buffer as this one is full.
if (++dstsOffset >= dstsEndOffset) {
return sslPending > 0 ?
newResult(BUFFER_OVERFLOW, status, bytesConsumed, bytesProduced) :
newResultMayFinishHandshake(isInboundDone() ? CLOSED : OK, status,
bytesConsumed, bytesProduced);
}
} else if (packetLength == 0 || jdkCompatibilityMode) {
// We either consumed all data or we are in jdkCompatibilityMode and have consumed
// a single TLS packet and should stop consuming until this method is called again.
break srcLoop;
}
} else {
int sslError = SSL.getError(ssl, bytesRead);
if (sslError == SSL.SSL_ERROR_WANT_READ || sslError == SSL.SSL_ERROR_WANT_WRITE) {
// break to the outer loop as we want to read more data which means we need to
// write more to the BIO.
break;
} else if (sslError == SSL.SSL_ERROR_ZERO_RETURN) {
// This means the connection was shutdown correctly, close inbound and outbound
if (!receivedShutdown) {
closeAll();
}
return newResultMayFinishHandshake(isInboundDone() ? CLOSED : OK, status,
bytesConsumed, bytesProduced);
} else if (sslError == SSL.SSL_ERROR_WANT_X509_LOOKUP ||
sslError == SSL.SSL_ERROR_WANT_CERTIFICATE_VERIFY ||
sslError == SSL.SSL_ERROR_WANT_PRIVATE_KEY_OPERATION) {
return newResult(isInboundDone() ? CLOSED : OK,
NEED_TASK, bytesConsumed, bytesProduced);
} else {
return sslReadErrorResult(sslError, SSL.getLastErrorNumber(), bytesConsumed,
bytesProduced);
}
}
}
if (++srcsOffset >= srcsEndOffset) {
break;
}
} finally {
if (bioWriteCopyBuf != null) {
bioWriteCopyBuf.release();
}
}
}
} finally {
SSL.bioClearByteBuffer(networkBIO);
rejectRemoteInitiatedRenegotiation();
}
// Check to see if we received a close_notify message from the peer.
if (!receivedShutdown && (SSL.getShutdown(ssl) & SSL.SSL_RECEIVED_SHUTDOWN) == SSL.SSL_RECEIVED_SHUTDOWN) {
closeAll();
}
return newResultMayFinishHandshake(isInboundDone() ? CLOSED : OK, status, bytesConsumed, bytesProduced);
}
}
private SSLEngineResult sslReadErrorResult(int error, int stackError, int bytesConsumed, int bytesProduced)
throws SSLException {
// Check if we have a pending handshakeException and if so see if we need to consume all pending data from the
// BIO first or can just shutdown and throw it now.
// This is needed so we ensure close_notify etc is correctly send to the remote peer.
// See https://github.com/netty/netty/issues/3900
if (SSL.bioLengthNonApplication(networkBIO) > 0) {
if (handshakeException == null && handshakeState != HandshakeState.FINISHED) {
// we seems to have data left that needs to be transferred and so the user needs
// call wrap(...). Store the error so we can pick it up later.
handshakeException = new SSLHandshakeException(SSL.getErrorString(stackError));
}
// We need to clear all errors so we not pick up anything that was left on the stack on the next
// operation. Note that shutdownWithError(...) will cleanup the stack as well so its only needed here.
SSL.clearError();
return new SSLEngineResult(OK, NEED_WRAP, bytesConsumed, bytesProduced);
}
throw shutdownWithError("SSL_read", error, stackError);
}
private void closeAll() throws SSLException {
receivedShutdown = true;
closeOutbound();
closeInbound();
}
private void rejectRemoteInitiatedRenegotiation() throws SSLHandshakeException {
// As rejectRemoteInitiatedRenegotiation() is called in a finally block we also need to check if we shutdown
// the engine before as otherwise SSL.getHandshakeCount(ssl) will throw an NPE if the passed in ssl is 0.
// See https://github.com/netty/netty/issues/7353
if (!isDestroyed() && SSL.getHandshakeCount(ssl) > 1 &&
// As we may count multiple handshakes when TLSv1.3 is used we should just ignore this here as
// renegotiation is not supported in TLSv1.3 as per spec.
!SslUtils.PROTOCOL_TLS_V1_3.equals(session.getProtocol()) && handshakeState == HandshakeState.FINISHED) {
// TODO: In future versions me may also want to send a fatal_alert to the client and so notify it
// that the renegotiation failed.
shutdown();
throw new SSLHandshakeException("remote-initiated renegotiation not allowed");
}
}
public final SSLEngineResult unwrap(final ByteBuffer[] srcs, final ByteBuffer[] dsts) throws SSLException {
return unwrap(srcs, 0, srcs.length, dsts, 0, dsts.length);
}
private ByteBuffer[] singleSrcBuffer(ByteBuffer src) {
singleSrcBuffer[0] = src;
return singleSrcBuffer;
}
private void resetSingleSrcBuffer() {
singleSrcBuffer[0] = null;
}
private ByteBuffer[] singleDstBuffer(ByteBuffer src) {
singleDstBuffer[0] = src;
return singleDstBuffer;
}
private void resetSingleDstBuffer() {
singleDstBuffer[0] = null;
}
@Override
public final synchronized SSLEngineResult unwrap(
final ByteBuffer src, final ByteBuffer[] dsts, final int offset, final int length) throws SSLException {
try {
return unwrap(singleSrcBuffer(src), 0, 1, dsts, offset, length);
} finally {
resetSingleSrcBuffer();
}
}
@Override
public final synchronized SSLEngineResult wrap(ByteBuffer src, ByteBuffer dst) throws SSLException {
try {
return wrap(singleSrcBuffer(src), dst);
} finally {
resetSingleSrcBuffer();
}
}
@Override
public final synchronized SSLEngineResult unwrap(ByteBuffer src, ByteBuffer dst) throws SSLException {
try {
return unwrap(singleSrcBuffer(src), singleDstBuffer(dst));
} finally {
resetSingleSrcBuffer();
resetSingleDstBuffer();
}
}
@Override
public final synchronized SSLEngineResult unwrap(ByteBuffer src, ByteBuffer[] dsts) throws SSLException {
try {
return unwrap(singleSrcBuffer(src), dsts);
} finally {
resetSingleSrcBuffer();
}
}
@Override
public final synchronized Runnable getDelegatedTask() {
if (isDestroyed()) {
return null;
}
final Runnable task = SSL.getTask(ssl);
if (task == null) {
return null;
}
return new Runnable() {
@Override
public void run() {
if (isDestroyed()) {
// The engine was destroyed in the meantime, just return.
return;
}
try {
task.run();
} finally {
// The task was run, reset needTask to false so getHandshakeStatus() returns the correct value.
needTask = false;
}
}
};
}
@Override
public final synchronized void closeInbound() throws SSLException {
if (isInboundDone) {
return;
}
isInboundDone = true;
if (isOutboundDone()) {
// Only call shutdown if there is no outbound data pending.
// See https://github.com/netty/netty/issues/6167
shutdown();
}
if (handshakeState != HandshakeState.NOT_STARTED && !receivedShutdown) {
throw new SSLException(
"Inbound closed before receiving peer's close_notify: possible truncation attack?");
}
}
@Override
public final synchronized boolean isInboundDone() {
return isInboundDone;
}
@Override
public final synchronized void closeOutbound() {
if (outboundClosed) {
return;
}
outboundClosed = true;
if (handshakeState != HandshakeState.NOT_STARTED && !isDestroyed()) {
int mode = SSL.getShutdown(ssl);
if ((mode & SSL.SSL_SENT_SHUTDOWN) != SSL.SSL_SENT_SHUTDOWN) {
doSSLShutdown();
}
} else {
// engine closing before initial handshake
shutdown();
}
}
/**
* Attempt to call {@link SSL#shutdownSSL(long)}.
* @return {@code false} if the call to {@link SSL#shutdownSSL(long)} was not attempted or returned an error.
*/
private boolean doSSLShutdown() {
if (SSL.isInInit(ssl) != 0) {
// Only try to call SSL_shutdown if we are not in the init state anymore.
// Otherwise we will see 'error:140E0197:SSL routines:SSL_shutdown:shutdown while in init' in our logs.
//
// See also http://hg.nginx.org/nginx/rev/062c189fee20
return false;
}
int err = SSL.shutdownSSL(ssl);
if (err < 0) {
int sslErr = SSL.getError(ssl, err);
if (sslErr == SSL.SSL_ERROR_SYSCALL || sslErr == SSL.SSL_ERROR_SSL) {
if (logger.isDebugEnabled()) {
int error = SSL.getLastErrorNumber();
logger.debug("SSL_shutdown failed: OpenSSL error: {} {}", error, SSL.getErrorString(error));
}
// There was an internal error -- shutdown
shutdown();
return false;
}
SSL.clearError();
}
return true;
}
@Override
public final synchronized boolean isOutboundDone() {
// Check if there is anything left in the outbound buffer.
// We need to ensure we only call SSL.pendingWrittenBytesInBIO(...) if the engine was not destroyed yet.
return outboundClosed && (networkBIO == 0 || SSL.bioLengthNonApplication(networkBIO) == 0);
}
@Override
public final String[] getSupportedCipherSuites() {
return OpenSsl.AVAILABLE_CIPHER_SUITES.toArray(new String[0]);
}
@Override
public final String[] getEnabledCipherSuites() {
final String[] enabled;
synchronized (this) {
if (!isDestroyed()) {
enabled = SSL.getCiphers(ssl);
} else {
return EmptyArrays.EMPTY_STRINGS;
}
}
if (enabled == null) {
return EmptyArrays.EMPTY_STRINGS;
} else {
List enabledList = new ArrayList();
synchronized (this) {
for (int i = 0; i < enabled.length; i++) {
String mapped = toJavaCipherSuite(enabled[i]);
final String cipher = mapped == null ? enabled[i] : mapped;
if (!OpenSsl.isTlsv13Supported() && SslUtils.isTLSv13Cipher(cipher)) {
continue;
}
enabledList.add(cipher);
}
}
return enabledList.toArray(new String[0]);
}
}
@Override
public final void setEnabledCipherSuites(String[] cipherSuites) {
checkNotNull(cipherSuites, "cipherSuites");
final StringBuilder buf = new StringBuilder();
final StringBuilder bufTLSv13 = new StringBuilder();
CipherSuiteConverter.convertToCipherStrings(Arrays.asList(cipherSuites), buf, bufTLSv13, OpenSsl.isBoringSSL());
final String cipherSuiteSpec = buf.toString();
final String cipherSuiteSpecTLSv13 = bufTLSv13.toString();
if (!OpenSsl.isTlsv13Supported() && !cipherSuiteSpecTLSv13.isEmpty()) {
throw new IllegalArgumentException("TLSv1.3 is not supported by this java version.");
}
synchronized (this) {
if (!isDestroyed()) {
// TODO: Should we also adjust the protocols based on if there are any ciphers left that can be used
// for TLSv1.3 or for previor SSL/TLS versions ?
try {
// Set non TLSv1.3 ciphers.
SSL.setCipherSuites(ssl, cipherSuiteSpec, false);
if (OpenSsl.isTlsv13Supported()) {
// Set TLSv1.3 ciphers.
SSL.setCipherSuites(ssl, cipherSuiteSpecTLSv13, true);
}
} catch (Exception e) {
throw new IllegalStateException("failed to enable cipher suites: " + cipherSuiteSpec, e);
}
} else {
throw new IllegalStateException("failed to enable cipher suites: " + cipherSuiteSpec);
}
}
}
@Override
public final String[] getSupportedProtocols() {
return OpenSsl.SUPPORTED_PROTOCOLS_SET.toArray(new String[0]);
}
@Override
public final String[] getEnabledProtocols() {
List enabled = new ArrayList(6);
// Seems like there is no way to explicit disable SSLv2Hello in openssl so it is always enabled
enabled.add(PROTOCOL_SSL_V2_HELLO);
int opts;
synchronized (this) {
if (!isDestroyed()) {
opts = SSL.getOptions(ssl);
} else {
return enabled.toArray(new String[0]);
}
}
if (isProtocolEnabled(opts, SSL.SSL_OP_NO_TLSv1, PROTOCOL_TLS_V1)) {
enabled.add(PROTOCOL_TLS_V1);
}
if (isProtocolEnabled(opts, SSL.SSL_OP_NO_TLSv1_1, PROTOCOL_TLS_V1_1)) {
enabled.add(PROTOCOL_TLS_V1_1);
}
if (isProtocolEnabled(opts, SSL.SSL_OP_NO_TLSv1_2, PROTOCOL_TLS_V1_2)) {
enabled.add(PROTOCOL_TLS_V1_2);
}
if (isProtocolEnabled(opts, SSL.SSL_OP_NO_TLSv1_3, PROTOCOL_TLS_V1_3)) {
enabled.add(PROTOCOL_TLS_V1_3);
}
if (isProtocolEnabled(opts, SSL.SSL_OP_NO_SSLv2, PROTOCOL_SSL_V2)) {
enabled.add(PROTOCOL_SSL_V2);
}
if (isProtocolEnabled(opts, SSL.SSL_OP_NO_SSLv3, PROTOCOL_SSL_V3)) {
enabled.add(PROTOCOL_SSL_V3);
}
return enabled.toArray(new String[0]);
}
private static boolean isProtocolEnabled(int opts, int disableMask, String protocolString) {
// We also need to check if the actual protocolString is supported as depending on the openssl API
// implementations it may use a disableMask of 0 (BoringSSL is doing this for example).
return (opts & disableMask) == 0 && OpenSsl.SUPPORTED_PROTOCOLS_SET.contains(protocolString);
}
/**
* {@inheritDoc}
* TLS doesn't support a way to advertise non-contiguous versions from the client's perspective, and the client
* just advertises the max supported version. The TLS protocol also doesn't support all different combinations of
* discrete protocols, and instead assumes contiguous ranges. OpenSSL has some unexpected behavior
* (e.g. handshake failures) if non-contiguous protocols are used even where there is a compatible set of protocols
* and ciphers. For these reasons this method will determine the minimum protocol and the maximum protocol and
* enabled a contiguous range from [min protocol, max protocol] in OpenSSL.
*/
@Override
public final void setEnabledProtocols(String[] protocols) {
if (protocols == null) {
// This is correct from the API docs
throw new IllegalArgumentException();
}
int minProtocolIndex = OPENSSL_OP_NO_PROTOCOLS.length;
int maxProtocolIndex = 0;
for (String p: protocols) {
if (!OpenSsl.SUPPORTED_PROTOCOLS_SET.contains(p)) {
throw new IllegalArgumentException("Protocol " + p + " is not supported.");
}
if (p.equals(PROTOCOL_SSL_V2)) {
if (minProtocolIndex > OPENSSL_OP_NO_PROTOCOL_INDEX_SSLV2) {
minProtocolIndex = OPENSSL_OP_NO_PROTOCOL_INDEX_SSLV2;
}
if (maxProtocolIndex < OPENSSL_OP_NO_PROTOCOL_INDEX_SSLV2) {
maxProtocolIndex = OPENSSL_OP_NO_PROTOCOL_INDEX_SSLV2;
}
} else if (p.equals(PROTOCOL_SSL_V3)) {
if (minProtocolIndex > OPENSSL_OP_NO_PROTOCOL_INDEX_SSLV3) {
minProtocolIndex = OPENSSL_OP_NO_PROTOCOL_INDEX_SSLV3;
}
if (maxProtocolIndex < OPENSSL_OP_NO_PROTOCOL_INDEX_SSLV3) {
maxProtocolIndex = OPENSSL_OP_NO_PROTOCOL_INDEX_SSLV3;
}
} else if (p.equals(PROTOCOL_TLS_V1)) {
if (minProtocolIndex > OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1) {
minProtocolIndex = OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1;
}
if (maxProtocolIndex < OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1) {
maxProtocolIndex = OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1;
}
} else if (p.equals(PROTOCOL_TLS_V1_1)) {
if (minProtocolIndex > OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_1) {
minProtocolIndex = OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_1;
}
if (maxProtocolIndex < OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_1) {
maxProtocolIndex = OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_1;
}
} else if (p.equals(PROTOCOL_TLS_V1_2)) {
if (minProtocolIndex > OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_2) {
minProtocolIndex = OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_2;
}
if (maxProtocolIndex < OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_2) {
maxProtocolIndex = OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_2;
}
} else if (p.equals(PROTOCOL_TLS_V1_3)) {
if (minProtocolIndex > OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_3) {
minProtocolIndex = OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_3;
}
if (maxProtocolIndex < OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_3) {
maxProtocolIndex = OPENSSL_OP_NO_PROTOCOL_INDEX_TLSv1_3;
}
}
}
synchronized (this) {
if (!isDestroyed()) {
// Clear out options which disable protocols
SSL.clearOptions(ssl, SSL.SSL_OP_NO_SSLv2 | SSL.SSL_OP_NO_SSLv3 | SSL.SSL_OP_NO_TLSv1 |
SSL.SSL_OP_NO_TLSv1_1 | SSL.SSL_OP_NO_TLSv1_2 | SSL.SSL_OP_NO_TLSv1_3);
int opts = 0;
for (int i = 0; i < minProtocolIndex; ++i) {
opts |= OPENSSL_OP_NO_PROTOCOLS[i];
}
assert maxProtocolIndex != MAX_VALUE;
for (int i = maxProtocolIndex + 1; i < OPENSSL_OP_NO_PROTOCOLS.length; ++i) {
opts |= OPENSSL_OP_NO_PROTOCOLS[i];
}
// Disable protocols we do not want
SSL.setOptions(ssl, opts);
} else {
throw new IllegalStateException("failed to enable protocols: " + Arrays.asList(protocols));
}
}
}
@Override
public final SSLSession getSession() {
return session;
}
@Override
public final synchronized void beginHandshake() throws SSLException {
switch (handshakeState) {
case STARTED_IMPLICITLY:
checkEngineClosed();
// A user did not start handshake by calling this method by him/herself,
// but handshake has been started already by wrap() or unwrap() implicitly.
// Because it's the user's first time to call this method, it is unfair to
// raise an exception. From the user's standpoint, he or she never asked
// for renegotiation.
handshakeState = HandshakeState.STARTED_EXPLICITLY; // Next time this method is invoked by the user,
calculateMaxWrapOverhead();
// we should raise an exception.
break;
case STARTED_EXPLICITLY:
// Nothing to do as the handshake is not done yet.
break;
case FINISHED:
throw new SSLException("renegotiation unsupported");
case NOT_STARTED:
handshakeState = HandshakeState.STARTED_EXPLICITLY;
if (handshake() == NEED_TASK) {
// Set needTask to true so getHandshakeStatus() will return the correct value.
needTask = true;
}
calculateMaxWrapOverhead();
break;
default:
throw new Error();
}
}
private void checkEngineClosed() throws SSLException {
if (isDestroyed()) {
throw new SSLException("engine closed");
}
}
private static SSLEngineResult.HandshakeStatus pendingStatus(int pendingStatus) {
// Depending on if there is something left in the BIO we need to WRAP or UNWRAP
return pendingStatus > 0 ? NEED_WRAP : NEED_UNWRAP;
}
private static boolean isEmpty(Object[] arr) {
return arr == null || arr.length == 0;
}
private static boolean isEmpty(byte[] cert) {
return cert == null || cert.length == 0;
}
private SSLEngineResult.HandshakeStatus handshakeException() throws SSLException {
if (SSL.bioLengthNonApplication(networkBIO) > 0) {
// There is something pending, we need to consume it first via a WRAP so we don't loose anything.
return NEED_WRAP;
}
Throwable exception = handshakeException;
assert exception != null;
handshakeException = null;
shutdown();
if (exception instanceof SSLHandshakeException) {
throw (SSLHandshakeException) exception;
}
SSLHandshakeException e = new SSLHandshakeException("General OpenSslEngine problem");
e.initCause(exception);
throw e;
}
/**
* Should be called if the handshake will be failed due a callback that throws an exception.
* This cause will then be used to give more details as part of the {@link SSLHandshakeException}.
*/
final void initHandshakeException(Throwable cause) {
assert handshakeException == null;
handshakeException = cause;
}
private SSLEngineResult.HandshakeStatus handshake() throws SSLException {
if (needTask) {
return NEED_TASK;
}
if (handshakeState == HandshakeState.FINISHED) {
return FINISHED;
}
checkEngineClosed();
if (handshakeException != null) {
// Let's call SSL.doHandshake(...) again in case there is some async operation pending that would fill the
// outbound buffer.
if (SSL.doHandshake(ssl) <= 0) {
// Clear any error that was put on the stack by the handshake
SSL.clearError();
}
return handshakeException();
}
// Adding the OpenSslEngine to the OpenSslEngineMap so it can be used in the AbstractCertificateVerifier.
engineMap.add(this);
if (lastAccessed == -1) {
lastAccessed = System.currentTimeMillis();
}
int code = SSL.doHandshake(ssl);
if (code <= 0) {
int sslError = SSL.getError(ssl, code);
if (sslError == SSL.SSL_ERROR_WANT_READ || sslError == SSL.SSL_ERROR_WANT_WRITE) {
return pendingStatus(SSL.bioLengthNonApplication(networkBIO));
}
if (sslError == SSL.SSL_ERROR_WANT_X509_LOOKUP ||
sslError == SSL.SSL_ERROR_WANT_CERTIFICATE_VERIFY ||
sslError == SSL.SSL_ERROR_WANT_PRIVATE_KEY_OPERATION) {
return NEED_TASK;
}
// Check if we have a pending exception that was created during the handshake and if so throw it after
// shutdown the connection.
if (handshakeException != null) {
return handshakeException();
}
// Everything else is considered as error
throw shutdownWithError("SSL_do_handshake", sslError);
}
// We have produced more data as part of the handshake if this is the case the user should call wrap(...)
if (SSL.bioLengthNonApplication(networkBIO) > 0) {
return NEED_WRAP;
}
// if SSL_do_handshake returns > 0 or sslError == SSL.SSL_ERROR_NAME it means the handshake was finished.
session.handshakeFinished();
return FINISHED;
}
private SSLEngineResult.HandshakeStatus mayFinishHandshake(SSLEngineResult.HandshakeStatus status)
throws SSLException {
if (status == NOT_HANDSHAKING && handshakeState != HandshakeState.FINISHED) {
// If the status was NOT_HANDSHAKING and we not finished the handshake we need to call
// SSL_do_handshake() again
return handshake();
}
return status;
}
@Override
public final synchronized SSLEngineResult.HandshakeStatus getHandshakeStatus() {
// Check if we are in the initial handshake phase or shutdown phase
if (needPendingStatus()) {
if (needTask) {
// There is a task outstanding
return NEED_TASK;
}
return pendingStatus(SSL.bioLengthNonApplication(networkBIO));
}
return NOT_HANDSHAKING;
}
private SSLEngineResult.HandshakeStatus getHandshakeStatus(int pending) {
// Check if we are in the initial handshake phase or shutdown phase
if (needPendingStatus()) {
if (needTask) {
// There is a task outstanding
return NEED_TASK;
}
return pendingStatus(pending);
}
return NOT_HANDSHAKING;
}
private boolean needPendingStatus() {
return handshakeState != HandshakeState.NOT_STARTED && !isDestroyed()
&& (handshakeState != HandshakeState.FINISHED || isInboundDone() || isOutboundDone());
}
/**
* Converts the specified OpenSSL cipher suite to the Java cipher suite.
*/
private String toJavaCipherSuite(String openSslCipherSuite) {
if (openSslCipherSuite == null) {
return null;
}
String version = SSL.getVersion(ssl);
String prefix = toJavaCipherSuitePrefix(version);
return CipherSuiteConverter.toJava(openSslCipherSuite, prefix);
}
/**
* Converts the protocol version string returned by {@link SSL#getVersion(long)} to protocol family string.
*/
private static String toJavaCipherSuitePrefix(String protocolVersion) {
final char c;
if (protocolVersion == null || protocolVersion.isEmpty()) {
c = 0;
} else {
c = protocolVersion.charAt(0);
}
switch (c) {
case 'T':
return "TLS";
case 'S':
return "SSL";
default:
return "UNKNOWN";
}
}
@Override
public final void setUseClientMode(boolean clientMode) {
if (clientMode != this.clientMode) {
throw new UnsupportedOperationException();
}
}
@Override
public final boolean getUseClientMode() {
return clientMode;
}
@Override
public final void setNeedClientAuth(boolean b) {
setClientAuth(b ? ClientAuth.REQUIRE : ClientAuth.NONE);
}
@Override
public final boolean getNeedClientAuth() {
return clientAuth == ClientAuth.REQUIRE;
}
@Override
public final void setWantClientAuth(boolean b) {
setClientAuth(b ? ClientAuth.OPTIONAL : ClientAuth.NONE);
}
@Override
public final boolean getWantClientAuth() {
return clientAuth == ClientAuth.OPTIONAL;
}
/**
* See SSL_set_verify and
* {@link SSL#setVerify(long, int, int)}.
*/
@UnstableApi
public final synchronized void setVerify(int verifyMode, int depth) {
SSL.setVerify(ssl, verifyMode, depth);
}
private void setClientAuth(ClientAuth mode) {
if (clientMode) {
return;
}
synchronized (this) {
if (clientAuth == mode) {
// No need to issue any JNI calls if the mode is the same
return;
}
switch (mode) {
case NONE:
SSL.setVerify(ssl, SSL.SSL_CVERIFY_NONE, ReferenceCountedOpenSslContext.VERIFY_DEPTH);
break;
case REQUIRE:
SSL.setVerify(ssl, SSL.SSL_CVERIFY_REQUIRED, ReferenceCountedOpenSslContext.VERIFY_DEPTH);
break;
case OPTIONAL:
SSL.setVerify(ssl, SSL.SSL_CVERIFY_OPTIONAL, ReferenceCountedOpenSslContext.VERIFY_DEPTH);
break;
default:
throw new Error(mode.toString());
}
clientAuth = mode;
}
}
@Override
public final void setEnableSessionCreation(boolean b) {
if (b) {
throw new UnsupportedOperationException();
}
}
@Override
public final boolean getEnableSessionCreation() {
return false;
}
@SuppressJava6Requirement(reason = "Usage guarded by java version check")
@Override
public final synchronized SSLParameters getSSLParameters() {
SSLParameters sslParameters = super.getSSLParameters();
int version = PlatformDependent.javaVersion();
if (version >= 7) {
sslParameters.setEndpointIdentificationAlgorithm(endPointIdentificationAlgorithm);
Java7SslParametersUtils.setAlgorithmConstraints(sslParameters, algorithmConstraints);
if (version >= 8) {
if (sniHostNames != null) {
Java8SslUtils.setSniHostNames(sslParameters, sniHostNames);
}
if (!isDestroyed()) {
Java8SslUtils.setUseCipherSuitesOrder(
sslParameters, (SSL.getOptions(ssl) & SSL.SSL_OP_CIPHER_SERVER_PREFERENCE) != 0);
}
Java8SslUtils.setSNIMatchers(sslParameters, matchers);
}
}
return sslParameters;
}
@SuppressJava6Requirement(reason = "Usage guarded by java version check")
@Override
public final synchronized void setSSLParameters(SSLParameters sslParameters) {
int version = PlatformDependent.javaVersion();
if (version >= 7) {
if (sslParameters.getAlgorithmConstraints() != null) {
throw new IllegalArgumentException("AlgorithmConstraints are not supported.");
}
if (version >= 8) {
if (!isDestroyed()) {
if (clientMode) {
final List sniHostNames = Java8SslUtils.getSniHostNames(sslParameters);
for (String name: sniHostNames) {
SSL.setTlsExtHostName(ssl, name);
}
this.sniHostNames = sniHostNames;
}
if (Java8SslUtils.getUseCipherSuitesOrder(sslParameters)) {
SSL.setOptions(ssl, SSL.SSL_OP_CIPHER_SERVER_PREFERENCE);
} else {
SSL.clearOptions(ssl, SSL.SSL_OP_CIPHER_SERVER_PREFERENCE);
}
}
matchers = sslParameters.getSNIMatchers();
}
final String endPointIdentificationAlgorithm = sslParameters.getEndpointIdentificationAlgorithm();
final boolean endPointVerificationEnabled = isEndPointVerificationEnabled(endPointIdentificationAlgorithm);
// If the user asks for hostname verification we must ensure we verify the peer.
// If the user disables hostname verification we leave it up to the user to change the mode manually.
if (clientMode && endPointVerificationEnabled) {
SSL.setVerify(ssl, SSL.SSL_CVERIFY_REQUIRED, -1);
}
this.endPointIdentificationAlgorithm = endPointIdentificationAlgorithm;
algorithmConstraints = sslParameters.getAlgorithmConstraints();
}
super.setSSLParameters(sslParameters);
}
private static boolean isEndPointVerificationEnabled(String endPointIdentificationAlgorithm) {
return endPointIdentificationAlgorithm != null && !endPointIdentificationAlgorithm.isEmpty();
}
private boolean isDestroyed() {
return destroyed;
}
final boolean checkSniHostnameMatch(byte[] hostname) {
return Java8SslUtils.checkSniHostnameMatch(matchers, hostname);
}
@Override
public String getNegotiatedApplicationProtocol() {
return applicationProtocol;
}
private static long bufferAddress(ByteBuffer b) {
assert b.isDirect();
if (PlatformDependent.hasUnsafe()) {
return PlatformDependent.directBufferAddress(b);
}
return Buffer.address(b);
}
private final class DefaultOpenSslSession implements OpenSslSession {
private final OpenSslSessionContext sessionContext;
// These are guarded by synchronized(OpenSslEngine.this) as handshakeFinished() may be triggered by any
// thread.
private X509Certificate[] x509PeerCerts;
private Certificate[] peerCerts;
private String protocol;
private String cipher;
private byte[] id;
private long creationTime;
private volatile int applicationBufferSize = MAX_PLAINTEXT_LENGTH;
// lazy init for memory reasons
private Map values;
DefaultOpenSslSession(OpenSslSessionContext sessionContext) {
this.sessionContext = sessionContext;
}
private SSLSessionBindingEvent newSSLSessionBindingEvent(String name) {
return new SSLSessionBindingEvent(session, name);
}
@Override
public byte[] getId() {
synchronized (ReferenceCountedOpenSslEngine.this) {
if (id == null) {
return EmptyArrays.EMPTY_BYTES;
}
return id.clone();
}
}
@Override
public SSLSessionContext getSessionContext() {
return sessionContext;
}
@Override
public long getCreationTime() {
synchronized (ReferenceCountedOpenSslEngine.this) {
if (creationTime == 0 && !isDestroyed()) {
creationTime = SSL.getTime(ssl) * 1000L;
}
}
return creationTime;
}
@Override
public long getLastAccessedTime() {
long lastAccessed = ReferenceCountedOpenSslEngine.this.lastAccessed;
// if lastAccessed is -1 we will just return the creation time as the handshake was not started yet.
return lastAccessed == -1 ? getCreationTime() : lastAccessed;
}
@Override
public void invalidate() {
synchronized (ReferenceCountedOpenSslEngine.this) {
if (!isDestroyed()) {
SSL.setTimeout(ssl, 0);
}
}
}
@Override
public boolean isValid() {
synchronized (ReferenceCountedOpenSslEngine.this) {
if (!isDestroyed()) {
return System.currentTimeMillis() - (SSL.getTimeout(ssl) * 1000L) < (SSL.getTime(ssl) * 1000L);
}
}
return false;
}
@Override
public void putValue(String name, Object value) {
ObjectUtil.checkNotNull(name, "name");
ObjectUtil.checkNotNull(value, "value");
final Object old;
synchronized (this) {
Map values = this.values;
if (values == null) {
// Use size of 2 to keep the memory overhead small
values = this.values = new HashMap(2);
}
old = values.put(name, value);
}
if (value instanceof SSLSessionBindingListener) {
// Use newSSLSessionBindingEvent so we alway use the wrapper if needed.
((SSLSessionBindingListener) value).valueBound(newSSLSessionBindingEvent(name));
}
notifyUnbound(old, name);
}
@Override
public Object getValue(String name) {
ObjectUtil.checkNotNull(name, "name");
synchronized (this) {
if (values == null) {
return null;
}
return values.get(name);
}
}
@Override
public void removeValue(String name) {
ObjectUtil.checkNotNull(name, "name");
final Object old;
synchronized (this) {
Map values = this.values;
if (values == null) {
return;
}
old = values.remove(name);
}
notifyUnbound(old, name);
}
@Override
public String[] getValueNames() {
synchronized (this) {
Map values = this.values;
if (values == null || values.isEmpty()) {
return EmptyArrays.EMPTY_STRINGS;
}
return values.keySet().toArray(new String[0]);
}
}
private void notifyUnbound(Object value, String name) {
if (value instanceof SSLSessionBindingListener) {
// Use newSSLSessionBindingEvent so we alway use the wrapper if needed.
((SSLSessionBindingListener) value).valueUnbound(newSSLSessionBindingEvent(name));
}
}
/**
* Finish the handshake and so init everything in the {@link OpenSslSession} that should be accessible by
* the user.
*/
@Override
public void handshakeFinished() throws SSLException {
synchronized (ReferenceCountedOpenSslEngine.this) {
if (!isDestroyed()) {
id = SSL.getSessionId(ssl);
cipher = toJavaCipherSuite(SSL.getCipherForSSL(ssl));
protocol = SSL.getVersion(ssl);
initPeerCerts();
selectApplicationProtocol();
calculateMaxWrapOverhead();
handshakeState = HandshakeState.FINISHED;
} else {
throw new SSLException("Already closed");
}
}
}
/**
* Init peer certificates that can be obtained via {@link #getPeerCertificateChain()}
* and {@link #getPeerCertificates()}.
*/
private void initPeerCerts() {
// Return the full chain from the JNI layer.
byte[][] chain = SSL.getPeerCertChain(ssl);
if (clientMode) {
if (isEmpty(chain)) {
peerCerts = EMPTY_CERTIFICATES;
x509PeerCerts = EMPTY_JAVAX_X509_CERTIFICATES;
} else {
peerCerts = new Certificate[chain.length];
x509PeerCerts = new X509Certificate[chain.length];
initCerts(chain, 0);
}
} else {
// if used on the server side SSL_get_peer_cert_chain(...) will not include the remote peer
// certificate. We use SSL_get_peer_certificate to get it in this case and add it to our
// array later.
//
// See https://www.openssl.org/docs/ssl/SSL_get_peer_cert_chain.html
byte[] clientCert = SSL.getPeerCertificate(ssl);
if (isEmpty(clientCert)) {
peerCerts = EMPTY_CERTIFICATES;
x509PeerCerts = EMPTY_JAVAX_X509_CERTIFICATES;
} else {
if (isEmpty(chain)) {
peerCerts = new Certificate[] {new OpenSslX509Certificate(clientCert)};
x509PeerCerts = new X509Certificate[] {new OpenSslJavaxX509Certificate(clientCert)};
} else {
peerCerts = new Certificate[chain.length + 1];
x509PeerCerts = new X509Certificate[chain.length + 1];
peerCerts[0] = new OpenSslX509Certificate(clientCert);
x509PeerCerts[0] = new OpenSslJavaxX509Certificate(clientCert);
initCerts(chain, 1);
}
}
}
}
private void initCerts(byte[][] chain, int startPos) {
for (int i = 0; i < chain.length; i++) {
int certPos = startPos + i;
peerCerts[certPos] = new OpenSslX509Certificate(chain[i]);
x509PeerCerts[certPos] = new OpenSslJavaxX509Certificate(chain[i]);
}
}
/**
* Select the application protocol used.
*/
private void selectApplicationProtocol() throws SSLException {
ApplicationProtocolConfig.SelectedListenerFailureBehavior behavior = apn.selectedListenerFailureBehavior();
List protocols = apn.protocols();
String applicationProtocol;
switch (apn.protocol()) {
case NONE:
break;
// We always need to check for applicationProtocol == null as the remote peer may not support
// the TLS extension or may have returned an empty selection.
case ALPN:
applicationProtocol = SSL.getAlpnSelected(ssl);
if (applicationProtocol != null) {
ReferenceCountedOpenSslEngine.this.applicationProtocol = selectApplicationProtocol(
protocols, behavior, applicationProtocol);
}
break;
case NPN:
applicationProtocol = SSL.getNextProtoNegotiated(ssl);
if (applicationProtocol != null) {
ReferenceCountedOpenSslEngine.this.applicationProtocol = selectApplicationProtocol(
protocols, behavior, applicationProtocol);
}
break;
case NPN_AND_ALPN:
applicationProtocol = SSL.getAlpnSelected(ssl);
if (applicationProtocol == null) {
applicationProtocol = SSL.getNextProtoNegotiated(ssl);
}
if (applicationProtocol != null) {
ReferenceCountedOpenSslEngine.this.applicationProtocol = selectApplicationProtocol(
protocols, behavior, applicationProtocol);
}
break;
default:
throw new Error();
}
}
private String selectApplicationProtocol(List protocols,
ApplicationProtocolConfig.SelectedListenerFailureBehavior behavior,
String applicationProtocol) throws SSLException {
if (behavior == ApplicationProtocolConfig.SelectedListenerFailureBehavior.ACCEPT) {
return applicationProtocol;
} else {
int size = protocols.size();
assert size > 0;
if (protocols.contains(applicationProtocol)) {
return applicationProtocol;
} else {
if (behavior == ApplicationProtocolConfig.SelectedListenerFailureBehavior.CHOOSE_MY_LAST_PROTOCOL) {
return protocols.get(size - 1);
} else {
throw new SSLException("unknown protocol " + applicationProtocol);
}
}
}
}
@Override
public Certificate[] getPeerCertificates() throws SSLPeerUnverifiedException {
synchronized (ReferenceCountedOpenSslEngine.this) {
if (isEmpty(peerCerts)) {
throw new SSLPeerUnverifiedException("peer not verified");
}
return peerCerts.clone();
}
}
@Override
public Certificate[] getLocalCertificates() {
Certificate[] localCerts = ReferenceCountedOpenSslEngine.this.localCertificateChain;
if (localCerts == null) {
return null;
}
return localCerts.clone();
}
@Override
public X509Certificate[] getPeerCertificateChain() throws SSLPeerUnverifiedException {
synchronized (ReferenceCountedOpenSslEngine.this) {
if (isEmpty(x509PeerCerts)) {
throw new SSLPeerUnverifiedException("peer not verified");
}
return x509PeerCerts.clone();
}
}
@Override
public Principal getPeerPrincipal() throws SSLPeerUnverifiedException {
Certificate[] peer = getPeerCertificates();
// No need for null or length > 0 is needed as this is done in getPeerCertificates()
// already.
return ((java.security.cert.X509Certificate) peer[0]).getSubjectX500Principal();
}
@Override
public Principal getLocalPrincipal() {
Certificate[] local = ReferenceCountedOpenSslEngine.this.localCertificateChain;
if (local == null || local.length == 0) {
return null;
}
return ((java.security.cert.X509Certificate) local[0]).getIssuerX500Principal();
}
@Override
public String getCipherSuite() {
synchronized (ReferenceCountedOpenSslEngine.this) {
if (cipher == null) {
return SslUtils.INVALID_CIPHER;
}
return cipher;
}
}
@Override
public String getProtocol() {
String protocol = this.protocol;
if (protocol == null) {
synchronized (ReferenceCountedOpenSslEngine.this) {
if (!isDestroyed()) {
protocol = SSL.getVersion(ssl);
} else {
protocol = StringUtil.EMPTY_STRING;
}
}
}
return protocol;
}
@Override
public String getPeerHost() {
return ReferenceCountedOpenSslEngine.this.getPeerHost();
}
@Override
public int getPeerPort() {
return ReferenceCountedOpenSslEngine.this.getPeerPort();
}
@Override
public int getPacketBufferSize() {
return maxEncryptedPacketLength();
}
@Override
public int getApplicationBufferSize() {
return applicationBufferSize;
}
@Override
public void tryExpandApplicationBufferSize(int packetLengthDataOnly) {
if (packetLengthDataOnly > MAX_PLAINTEXT_LENGTH && applicationBufferSize != MAX_RECORD_SIZE) {
applicationBufferSize = MAX_RECORD_SIZE;
}
}
}
}