java.com.google.common.util.concurrent.RateLimiter Maven / Gradle / Ivy
Show all versions of guava Show documentation
/*
* Copyright (C) 2012 The Guava Authors
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
* in compliance with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software distributed under the License
* is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
* or implied. See the License for the specific language governing permissions and limitations under
* the License.
*/
package com.google.common.util.concurrent;
import static com.google.common.base.Preconditions.checkArgument;
import static com.google.common.base.Preconditions.checkNotNull;
import static java.lang.Math.max;
import static java.util.concurrent.TimeUnit.MICROSECONDS;
import static java.util.concurrent.TimeUnit.SECONDS;
import com.google.common.annotations.Beta;
import com.google.common.annotations.GwtIncompatible;
import com.google.common.annotations.VisibleForTesting;
import com.google.common.base.Stopwatch;
import com.google.common.util.concurrent.SmoothRateLimiter.SmoothBursty;
import com.google.common.util.concurrent.SmoothRateLimiter.SmoothWarmingUp;
import com.google.errorprone.annotations.CanIgnoreReturnValue;
import java.util.Locale;
import java.util.concurrent.TimeUnit;
import org.checkerframework.checker.nullness.qual.MonotonicNonNull;
/**
* A rate limiter. Conceptually, a rate limiter distributes permits at a configurable rate. Each
* {@link #acquire()} blocks if necessary until a permit is available, and then takes it. Once
* acquired, permits need not be released.
*
* {@code RateLimiter} is safe for concurrent use: It will restrict the total rate of calls from
* all threads. Note, however, that it does not guarantee fairness.
*
*
Rate limiters are often used to restrict the rate at which some physical or logical resource
* is accessed. This is in contrast to {@link java.util.concurrent.Semaphore} which restricts the
* number of concurrent accesses instead of the rate (note though that concurrency and rate are
* closely related, e.g. see Little's
* Law).
*
*
A {@code RateLimiter} is defined primarily by the rate at which permits are issued. Absent
* additional configuration, permits will be distributed at a fixed rate, defined in terms of
* permits per second. Permits will be distributed smoothly, with the delay between individual
* permits being adjusted to ensure that the configured rate is maintained.
*
*
It is possible to configure a {@code RateLimiter} to have a warmup period during which time
* the permits issued each second steadily increases until it hits the stable rate.
*
*
As an example, imagine that we have a list of tasks to execute, but we don't want to submit
* more than 2 per second:
*
*
{@code
* final RateLimiter rateLimiter = RateLimiter.create(2.0); // rate is "2 permits per second"
* void submitTasks(List tasks, Executor executor) {
* for (Runnable task : tasks) {
* rateLimiter.acquire(); // may wait
* executor.execute(task);
* }
* }
* }
*
* As another example, imagine that we produce a stream of data, and we want to cap it at 5kb per
* second. This could be accomplished by requiring a permit per byte, and specifying a rate of 5000
* permits per second:
*
*
{@code
* final RateLimiter rateLimiter = RateLimiter.create(5000.0); // rate = 5000 permits per second
* void submitPacket(byte[] packet) {
* rateLimiter.acquire(packet.length);
* networkService.send(packet);
* }
* }
*
* It is important to note that the number of permits requested never affects the
* throttling of the request itself (an invocation to {@code acquire(1)} and an invocation to {@code
* acquire(1000)} will result in exactly the same throttling, if any), but it affects the throttling
* of the next request. I.e., if an expensive task arrives at an idle RateLimiter, it will be
* granted immediately, but it is the next request that will experience extra throttling,
* thus paying for the cost of the expensive task.
*
* @author Dimitris Andreou
* @since 13.0
*/
// TODO(user): switch to nano precision. A natural unit of cost is "bytes", and a micro precision
// would mean a maximum rate of "1MB/s", which might be small in some cases.
@Beta
@GwtIncompatible
@SuppressWarnings("GoodTime") // lots of violations - also how should we model a rate?
public abstract class RateLimiter {
/**
* Creates a {@code RateLimiter} with the specified stable throughput, given as "permits per
* second" (commonly referred to as QPS, queries per second).
*
*
The returned {@code RateLimiter} ensures that on average no more than {@code
* permitsPerSecond} are issued during any given second, with sustained requests being smoothly
* spread over each second. When the incoming request rate exceeds {@code permitsPerSecond} the
* rate limiter will release one permit every {@code (1.0 / permitsPerSecond)} seconds. When the
* rate limiter is unused, bursts of up to {@code permitsPerSecond} permits will be allowed, with
* subsequent requests being smoothly limited at the stable rate of {@code permitsPerSecond}.
*
* @param permitsPerSecond the rate of the returned {@code RateLimiter}, measured in how many
* permits become available per second
* @throws IllegalArgumentException if {@code permitsPerSecond} is negative or zero
*/
// TODO(user): "This is equivalent to
// {@code createWithCapacity(permitsPerSecond, 1, TimeUnit.SECONDS)}".
public static RateLimiter create(double permitsPerSecond) {
/*
* The default RateLimiter configuration can save the unused permits of up to one second. This
* is to avoid unnecessary stalls in situations like this: A RateLimiter of 1qps, and 4 threads,
* all calling acquire() at these moments:
*
* T0 at 0 seconds
* T1 at 1.05 seconds
* T2 at 2 seconds
* T3 at 3 seconds
*
* Due to the slight delay of T1, T2 would have to sleep till 2.05 seconds, and T3 would also
* have to sleep till 3.05 seconds.
*/
return create(permitsPerSecond, SleepingStopwatch.createFromSystemTimer());
}
@VisibleForTesting
static RateLimiter create(double permitsPerSecond, SleepingStopwatch stopwatch) {
RateLimiter rateLimiter = new SmoothBursty(stopwatch, 1.0 /* maxBurstSeconds */);
rateLimiter.setRate(permitsPerSecond);
return rateLimiter;
}
/**
* Creates a {@code RateLimiter} with the specified stable throughput, given as "permits per
* second" (commonly referred to as QPS, queries per second), and a warmup period,
* during which the {@code RateLimiter} smoothly ramps up its rate, until it reaches its maximum
* rate at the end of the period (as long as there are enough requests to saturate it). Similarly,
* if the {@code RateLimiter} is left unused for a duration of {@code warmupPeriod}, it
* will gradually return to its "cold" state, i.e. it will go through the same warming up process
* as when it was first created.
*
*
The returned {@code RateLimiter} is intended for cases where the resource that actually
* fulfills the requests (e.g., a remote server) needs "warmup" time, rather than being
* immediately accessed at the stable (maximum) rate.
*
*
The returned {@code RateLimiter} starts in a "cold" state (i.e. the warmup period will
* follow), and if it is left unused for long enough, it will return to that state.
*
* @param permitsPerSecond the rate of the returned {@code RateLimiter}, measured in how many
* permits become available per second
* @param warmupPeriod the duration of the period where the {@code RateLimiter} ramps up its rate,
* before reaching its stable (maximum) rate
* @param unit the time unit of the warmupPeriod argument
* @throws IllegalArgumentException if {@code permitsPerSecond} is negative or zero or {@code
* warmupPeriod} is negative
*/
public static RateLimiter create(double permitsPerSecond, long warmupPeriod, TimeUnit unit) {
checkArgument(warmupPeriod >= 0, "warmupPeriod must not be negative: %s", warmupPeriod);
return create(
permitsPerSecond, warmupPeriod, unit, 3.0, SleepingStopwatch.createFromSystemTimer());
}
@VisibleForTesting
static RateLimiter create(
double permitsPerSecond,
long warmupPeriod,
TimeUnit unit,
double coldFactor,
SleepingStopwatch stopwatch) {
RateLimiter rateLimiter = new SmoothWarmingUp(stopwatch, warmupPeriod, unit, coldFactor);
rateLimiter.setRate(permitsPerSecond);
return rateLimiter;
}
/**
* The underlying timer; used both to measure elapsed time and sleep as necessary. A separate
* object to facilitate testing.
*/
private final SleepingStopwatch stopwatch;
// Can't be initialized in the constructor because mocks don't call the constructor.
@MonotonicNonNull private volatile Object mutexDoNotUseDirectly;
private Object mutex() {
Object mutex = mutexDoNotUseDirectly;
if (mutex == null) {
synchronized (this) {
mutex = mutexDoNotUseDirectly;
if (mutex == null) {
mutexDoNotUseDirectly = mutex = new Object();
}
}
}
return mutex;
}
RateLimiter(SleepingStopwatch stopwatch) {
this.stopwatch = checkNotNull(stopwatch);
}
/**
* Updates the stable rate of this {@code RateLimiter}, that is, the {@code permitsPerSecond}
* argument provided in the factory method that constructed the {@code RateLimiter}. Currently
* throttled threads will not be awakened as a result of this invocation, thus they do not
* observe the new rate; only subsequent requests will.
*
*
Note though that, since each request repays (by waiting, if necessary) the cost of the
* previous request, this means that the very next request after an invocation to {@code
* setRate} will not be affected by the new rate; it will pay the cost of the previous request,
* which is in terms of the previous rate.
*
*
The behavior of the {@code RateLimiter} is not modified in any other way, e.g. if the {@code
* RateLimiter} was configured with a warmup period of 20 seconds, it still has a warmup period of
* 20 seconds after this method invocation.
*
* @param permitsPerSecond the new stable rate of this {@code RateLimiter}
* @throws IllegalArgumentException if {@code permitsPerSecond} is negative or zero
*/
public final void setRate(double permitsPerSecond) {
checkArgument(
permitsPerSecond > 0.0 && !Double.isNaN(permitsPerSecond), "rate must be positive");
synchronized (mutex()) {
doSetRate(permitsPerSecond, stopwatch.readMicros());
}
}
abstract void doSetRate(double permitsPerSecond, long nowMicros);
/**
* Returns the stable rate (as {@code permits per seconds}) with which this {@code RateLimiter} is
* configured with. The initial value of this is the same as the {@code permitsPerSecond} argument
* passed in the factory method that produced this {@code RateLimiter}, and it is only updated
* after invocations to {@linkplain #setRate}.
*/
public final double getRate() {
synchronized (mutex()) {
return doGetRate();
}
}
abstract double doGetRate();
/**
* Acquires a single permit from this {@code RateLimiter}, blocking until the request can be
* granted. Tells the amount of time slept, if any.
*
*
This method is equivalent to {@code acquire(1)}.
*
* @return time spent sleeping to enforce rate, in seconds; 0.0 if not rate-limited
* @since 16.0 (present in 13.0 with {@code void} return type})
*/
@CanIgnoreReturnValue
public double acquire() {
return acquire(1);
}
/**
* Acquires the given number of permits from this {@code RateLimiter}, blocking until the request
* can be granted. Tells the amount of time slept, if any.
*
* @param permits the number of permits to acquire
* @return time spent sleeping to enforce rate, in seconds; 0.0 if not rate-limited
* @throws IllegalArgumentException if the requested number of permits is negative or zero
* @since 16.0 (present in 13.0 with {@code void} return type})
*/
@CanIgnoreReturnValue
public double acquire(int permits) {
long microsToWait = reserve(permits);
stopwatch.sleepMicrosUninterruptibly(microsToWait);
return 1.0 * microsToWait / SECONDS.toMicros(1L);
}
/**
* Reserves the given number of permits from this {@code RateLimiter} for future use, returning
* the number of microseconds until the reservation can be consumed.
*
* @return time in microseconds to wait until the resource can be acquired, never negative
*/
final long reserve(int permits) {
checkPermits(permits);
synchronized (mutex()) {
return reserveAndGetWaitLength(permits, stopwatch.readMicros());
}
}
/**
* Acquires a permit from this {@code RateLimiter} if it can be obtained without exceeding the
* specified {@code timeout}, or returns {@code false} immediately (without waiting) if the permit
* would not have been granted before the timeout expired.
*
*
This method is equivalent to {@code tryAcquire(1, timeout, unit)}.
*
* @param timeout the maximum time to wait for the permit. Negative values are treated as zero.
* @param unit the time unit of the timeout argument
* @return {@code true} if the permit was acquired, {@code false} otherwise
* @throws IllegalArgumentException if the requested number of permits is negative or zero
*/
public boolean tryAcquire(long timeout, TimeUnit unit) {
return tryAcquire(1, timeout, unit);
}
/**
* Acquires permits from this {@link RateLimiter} if it can be acquired immediately without delay.
*
*
This method is equivalent to {@code tryAcquire(permits, 0, anyUnit)}.
*
* @param permits the number of permits to acquire
* @return {@code true} if the permits were acquired, {@code false} otherwise
* @throws IllegalArgumentException if the requested number of permits is negative or zero
* @since 14.0
*/
public boolean tryAcquire(int permits) {
return tryAcquire(permits, 0, MICROSECONDS);
}
/**
* Acquires a permit from this {@link RateLimiter} if it can be acquired immediately without
* delay.
*
*
This method is equivalent to {@code tryAcquire(1)}.
*
* @return {@code true} if the permit was acquired, {@code false} otherwise
* @since 14.0
*/
public boolean tryAcquire() {
return tryAcquire(1, 0, MICROSECONDS);
}
/**
* Acquires the given number of permits from this {@code RateLimiter} if it can be obtained
* without exceeding the specified {@code timeout}, or returns {@code false} immediately (without
* waiting) if the permits would not have been granted before the timeout expired.
*
* @param permits the number of permits to acquire
* @param timeout the maximum time to wait for the permits. Negative values are treated as zero.
* @param unit the time unit of the timeout argument
* @return {@code true} if the permits were acquired, {@code false} otherwise
* @throws IllegalArgumentException if the requested number of permits is negative or zero
*/
public boolean tryAcquire(int permits, long timeout, TimeUnit unit) {
long timeoutMicros = max(unit.toMicros(timeout), 0);
checkPermits(permits);
long microsToWait;
synchronized (mutex()) {
long nowMicros = stopwatch.readMicros();
if (!canAcquire(nowMicros, timeoutMicros)) {
return false;
} else {
microsToWait = reserveAndGetWaitLength(permits, nowMicros);
}
}
stopwatch.sleepMicrosUninterruptibly(microsToWait);
return true;
}
private boolean canAcquire(long nowMicros, long timeoutMicros) {
return queryEarliestAvailable(nowMicros) - timeoutMicros <= nowMicros;
}
/**
* Reserves next ticket and returns the wait time that the caller must wait for.
*
* @return the required wait time, never negative
*/
final long reserveAndGetWaitLength(int permits, long nowMicros) {
long momentAvailable = reserveEarliestAvailable(permits, nowMicros);
return max(momentAvailable - nowMicros, 0);
}
/**
* Returns the earliest time that permits are available (with one caveat).
*
* @return the time that permits are available, or, if permits are available immediately, an
* arbitrary past or present time
*/
abstract long queryEarliestAvailable(long nowMicros);
/**
* Reserves the requested number of permits and returns the time that those permits can be used
* (with one caveat).
*
* @return the time that the permits may be used, or, if the permits may be used immediately, an
* arbitrary past or present time
*/
abstract long reserveEarliestAvailable(int permits, long nowMicros);
@Override
public String toString() {
return String.format(Locale.ROOT, "RateLimiter[stableRate=%3.1fqps]", getRate());
}
abstract static class SleepingStopwatch {
/** Constructor for use by subclasses. */
protected SleepingStopwatch() {}
/*
* We always hold the mutex when calling this. TODO(cpovirk): Is that important? Perhaps we need
* to guarantee that each call to reserveEarliestAvailable, etc. sees a value >= the previous?
* Also, is it OK that we don't hold the mutex when sleeping?
*/
protected abstract long readMicros();
protected abstract void sleepMicrosUninterruptibly(long micros);
public static SleepingStopwatch createFromSystemTimer() {
return new SleepingStopwatch() {
final Stopwatch stopwatch = Stopwatch.createStarted();
@Override
protected long readMicros() {
return stopwatch.elapsed(MICROSECONDS);
}
@Override
protected void sleepMicrosUninterruptibly(long micros) {
if (micros > 0) {
Uninterruptibles.sleepUninterruptibly(micros, MICROSECONDS);
}
}
};
}
}
private static void checkPermits(int permits) {
checkArgument(permits > 0, "Requested permits (%s) must be positive", permits);
}
}