org.xtce.toolkit.database.examples.BogusSAT-2.xml Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of xtcetools Show documentation
Show all versions of xtcetools Show documentation
This project contains software to support the Object Management Group (OMG) Space Domain Task Force (SDTF) maintained XML Telemetry and Command Exchange (XTCE) specification.
<?xml version="1.0" encoding="UTF-8"?> <!-- Copyright 2015 David Overeem ([email protected]) Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. --> <xtce:SpaceSystem name="BogusSAT" xmlns:xtce="http://www.omg.org/space/xtce" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.omg.org/space/xtce ../../../../omg/space/xtce/schema/SpaceSystemV1.2-27Feb2014-mods.xsd" shortDescription="This is a bogus satellite telemetry and telecommand database." operationalStatus="unittest"> <xtce:LongDescription>This is a bogus satellite telemetry and telecommand database. The purpose of BogusSAT is to exercise the capabilities of XTCE and the XTCE View tool.</xtce:LongDescription> <xtce:Header validationStatus="Working" classification="NotClassified" version="1.0" date="27-10-2012"> <xtce:AuthorSet> <xtce:Author>David Overeem, Member of the OMG SDTF and XTCE RTF</xtce:Author> </xtce:AuthorSet> <xtce:NoteSet> <xtce:Note>The root SpaceSystem for BogusSAT contains the parameters needed to define the transport of data for any of the BogusSAT satellites in the fleet or constellation.</xtce:Note> </xtce:NoteSet> </xtce:Header> <xtce:TelemetryMetaData> <xtce:ParameterTypeSet> <xtce:AbsoluteTimeParameterType name="POSIXTimeType" shortDescription="POSIX UNIX Time 'timeval' which is 2 unsigned 32 bit integers"> <xtce:Encoding> <xtce:IntegerDataEncoding sizeInBits="64"/> </xtce:Encoding> <xtce:ReferenceTime> <xtce:Epoch>1970-01-01</xtce:Epoch> </xtce:ReferenceTime> </xtce:AbsoluteTimeParameterType> <xtce:IntegerParameterType name="Generic_8bits_unsigned" signed="false"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="8"/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="Generic_16bits_unsigned" signed="false"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="16"/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="Generic_32bits_unsigned" signed="false"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="32"/> </xtce:IntegerParameterType> <xtce:EnumeratedParameterType name="TM_CHECKSUMType" initialValue="CRC"> <xtce:UnitSet/> <xtce:EnumerationList> <xtce:Enumeration label="NotUsed" value="0"/> <xtce:Enumeration label="CRC" value="1"/> <xtce:Enumeration label="Checksum" value="2"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:EnumeratedParameterType name="APPL_TIME_CODEType" initialValue="CUC"> <xtce:UnitSet/> <xtce:EnumerationList> <xtce:Enumeration label="NotUsed" value="0"/> <xtce:Enumeration label="CUC" value="1"/> <xtce:Enumeration label="CDS" value="2"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:EnumeratedParameterType name="MissionType" shortDescription="Reserved Mission Phase and Operating Modes"> <xtce:UnitSet/> <xtce:EnumerationList> <xtce:Enumeration value="0" label="TestBed"/> <xtce:Enumeration value="1" label="IntegrationTest"/> <xtce:Enumeration value="2" label="Vibration"/> <xtce:Enumeration value="3" label="ThermalVac"/> <xtce:Enumeration value="4" label="EMC"/> <xtce:Enumeration value="5" label="Platform"/> <xtce:Enumeration value="6" label="Launch"/> <xtce:Enumeration value="7" label="Orbit"/> <xtce:Enumeration value="8" label="Checkout"/> <xtce:Enumeration value="9" label="Mission"/> <xtce:Enumeration value="10" label="Safe"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:IntegerParameterType name="SomeParameter_Type" signed="false" shortDescription="Used to demonstrate going backwards in the parameterRef attribute"> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="7"/> </xtce:IntegerParameterType> <xtce:AggregateParameterType name="CCSDS_Packet_ID_Type" shortDescription="CCSDS Header Packet ID fields"> <xtce:MemberList> <xtce:Member name="Version" typeRef="CCSDSVersionType"/> <xtce:Member name="Type" typeRef="CCSDSTypeType"/> <xtce:Member name="SecHdrFlag" typeRef="CCSDSSecHdrFlagType"/> <xtce:Member name="APID" typeRef="CCSDSAPIDType"/> </xtce:MemberList> </xtce:AggregateParameterType> <xtce:AggregateParameterType name="CCSDS_Packet_Sequence_Type" shortDescription="CCSDS Header Packet Sequence Control fields"> <xtce:MemberList> <xtce:Member name="GroupFlags" typeRef="CCSDSGroupFlagsType"/> <xtce:Member name="Count" typeRef="CCSDSSourceSequenceCountType"/> </xtce:MemberList> </xtce:AggregateParameterType> <xtce:IntegerParameterType name="CCSDSSCIDType" signed="false" shortDescription="Satellite ID"> <xtce:UnitSet/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="CCSDSVCIDType" signed="false" shortDescription="Virtual Channel ID"> <xtce:UnitSet/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="CCSDSVersionType" signed="false" initialValue="0" shortDescription="CCSDS Version Number"> <xtce:LongDescription>By changing the version number, future variations of the telemetry source packet structure can be introduced. At present, however, only one version number shall be used: (value = 0).</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="3"/> </xtce:IntegerParameterType> <xtce:BooleanParameterType name="CCSDSTypeType" zeroStringValue="TM" oneStringValue="TC" shortDescription="CCSDS Packet Type"> <xtce:LongDescription>This bit distinguishes between telecommand packets and telemetry source packets. For telemetry source packets, the type = 0.</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="1"/> </xtce:BooleanParameterType> <xtce:BooleanParameterType name="CCSDSSecHdrFlagType" zeroStringValue="NotPresent" oneStringValue="Present" shortDescription="CCSDS Secondary Header Flag"> <xtce:LongDescription>This indicates the presence or absence of a data field header. If using ECSS PUS, and with the exception of the spacecraft time source packet, all telemetry source packets shall have a data field header, for which this bit shall be set to 1.</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="1"/> </xtce:BooleanParameterType> <xtce:IntegerParameterType name="CCSDSAPIDType" initialValue="2047" signed="false" shortDescription="CCSDS Application Process ID, with 2047 being an IDLE fill packet"> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="11"/> </xtce:IntegerParameterType> <xtce:EnumeratedParameterType name="CCSDSGroupFlagsType" initialValue="Standalone" shortDescription="CCSDS Packet Grouping Flag"> <xtce:LongDescription>The grouping flags shall be used when a number of telemetry source packets originating from the same application process are sent in a group. The interpretation of the grouping flags shall be 1=first packet of a group of packets, 0=continuation packet, 2=last packet of a group of packets, 3="stand-alone" packet. If using ECSS PUS, All standard telemetry source packets defined are stand-alone packets.</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="2"/> <xtce:EnumerationList> <xtce:Enumeration value="0" label="Continuation"/> <xtce:Enumeration value="1" label="First"/> <xtce:Enumeration value="2" label="Last"/> <xtce:Enumeration value="3" label="Standalone"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:IntegerParameterType name="CCSDSSourceSequenceCountType" signed="false" shortDescription="CCSDS Packet Sequence Counter"> <xtce:LongDescription>A separate source sequence count shall be maintained by each APID and shall be incremented by 1 whenever it releases a packet. If the application process can send distinct packets to distinct destinations using the optional Destination ID field shown below, then a separate source sequence count is maintained for each destination. Therefore the counter corresponds to the order of release of packets by the source and enables the destination (e.g. the ground system) to detect missing packets. This counter should never re-initialize; however, under no circumstances shall it “shortcycle” (i.e. have a discontinuity other than to a value zero). The counter wraps around from max value to zero.</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="14"/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="CCSDSPacketLengthType" signed="false" shortDescription="CCSDS Packet Length Field"> <xtce:LongDescription>The packet length field specifies the number of octets contained within the packet data field. The number shall be an unsigned integer “C” where C = (Number of octets in packet data field) minus 1. NOTE The actual length of the entire telemetry source packet, including the source packet header, is 6 octets longer.</xtce:LongDescription> <xtce:UnitSet> <xtce:Unit description="Size">Octets</xtce:Unit> </xtce:UnitSet> <xtce:IntegerDataEncoding sizeInBits="16"/> </xtce:IntegerParameterType> <xtce:AggregateParameterType name="PUS_Data_Field_Header_Type" shortDescription="ECSS PUS Data Field Header"> <xtce:MemberList> <xtce:Member name="Spare1" typeRef="PUSspare1Type"/> <xtce:Member name="Version" typeRef="PUSVersionType"/> <xtce:Member name="Spare4" typeRef="PUSspare4Type"/> <xtce:Member name="Service" typeRef="PUSServiceType"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>PUS</xtce:SystemName> </xtce:ParameterProperties> </xtce:Member> <xtce:Member name="Subservice" typeRef="PUSSubServiceType"/> <xtce:Member name="SeqCount" typeRef="PUSSeqCountType"/> <xtce:Member name="Destination" typeRef="PUSDestinationType"/> </xtce:MemberList> </xtce:AggregateParameterType> <xtce:IntegerParameterType name="PUSspare1Type" signed="false" initialValue="0" shortDescription="Spare Bit"> <xtce:LongDescription>To maintain symmetry with the telecommand packet data field header, this bit shall be reserved and set to zero.</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="1"/> </xtce:IntegerParameterType> <xtce:IntegerParameterType signed="false" name="PUSVersionType" initialValue="1" shortDescription="PUS Version Number"> <xtce:LongDescription>By changing the PUS version number, future variations of the telemetry source packet can be introduced. It is expected to introduce a new version in the future for telemetry source packets that contain more than one service data unit. Users of ECSS PUS shall use version 1</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="3"/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="PUSspare4Type" signed="false" initialValue="0" shortDescription="Four Spare Bit"> <xtce:LongDescription>Spare bits shall be introduced in order tomake up an integral octet. These spare bits shall be set to zero.</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="4"/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="PUSServiceType" signed="false" shortDescription="PUS Service Identifier"> <xtce:LongDescription>This indicates the service to which this telemetry source packet relates. Service types 0 to 127 shall be reserved for this Standard, service types 128 to 255 are mission-specific.</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="8"/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="PUSSubServiceType" signed="false" shortDescription="PUS Service Identifier"> <xtce:LongDescription>Together with the service type, the subtype uniquely identifies the nature of the service report constituted by this telemetry source packet. Within standard services, subtypes 0 to 127 shall be reserved for this Standard, subtypes 128 to 255 are mission-specific. Within mission-specific services, all subtypes (0 to 255) are available for mission-specific use.</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="8"/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="PUSSeqCountType" signed="false" shortDescription="OPTIONAL PUS Subsequence Counter"> <xtce:LongDescription>This is a counter that increments each time the application process releases a newpacket of this type and subtype. If the application process can send distinct packets to distinct destinations using the optional Destination ID field shown below, then a separate source sequence count shall be maintained for each destination. Whilst the source sequence count enables the destination (e.g. the ground) to detect a transmission gap, this packet sub-counter givesmore information on the nature of the particular packets that are missing. This field shall be systematically omitted if this information is not applicable for this application process.</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="8"/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="PUSDestinationType" signed="false" shortDescription="OPTIONAL PUS Destination ID"> <xtce:LongDescription>This field identifies the destination of the telemetry source packet. The length of this field is known implicitly for the mission. This field shall be systematically omitted if the mission has only a single destination (i.e. the ground system) for telemetry source packets or has no requirement to distinguish between destinations.</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="8"/> </xtce:IntegerParameterType> <xtce:AbsoluteTimeParameterType name="PUSTimeType" shortDescription="OPTIONAL PUS Timestamp (CUC or CDS CCSDS Time Standard)"> <xtce:LongDescription>The on-board reference time of the packet, expressed in either the CUC or CDS format (as defined in CCSDS 301.0-B-2). The choice between CUC and CDS formats and the resolution of the timefield can vary from mission to mission and even between different application processes within the same satellite. For some missions or application processes, this time field may even not be present.The presence or absence of the field and its encoding are explicitly defined by the mission constant "APPL_TIME_CODE" of which there are asmany as there are on-board application processes. The representations of the timefield are those defined in clause 23 of thisStandard. If the CDS format is used, the standard CCSDS epoch of 1958 January 1 shall be applicable, see CCSDS 301.0-B-2. The packet on-board time corresponds to any well-defined time before the sampling of any data within the packet.</xtce:LongDescription> <xtce:Encoding> <xtce:IntegerDataEncoding sizeInBits="64"/> </xtce:Encoding> <xtce:ReferenceTime> <!--xtce:Epoch>TAI</xtce:Epoch--> <xtce:Epoch>1970-01-01</xtce:Epoch> </xtce:ReferenceTime> </xtce:AbsoluteTimeParameterType> <xtce:BinaryParameterType name="PUSErrorControlFieldType" shortDescription="OPTIONAL PUS Error Control Field"> <xtce:LongDescription>The packet error control field transports an error detection code that can be used by the ground system to verify the integrity of the complete telemetry source packet. The presence of the PEC and its type (either a checksum or CRC) shall be fixed for the complete mission for each application process and defined by the mission constant "TM_CHECKSUM_TYPE".</xtce:LongDescription> <xtce:UnitSet/> <xtce:BinaryDataEncoding> <xtce:SizeInBits> <xtce:FixedValue>16</xtce:FixedValue> </xtce:SizeInBits> </xtce:BinaryDataEncoding> </xtce:BinaryParameterType> <xtce:EnumeratedParameterType name="PUS_Structure_ID_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="8"/> <xtce:EnumerationList> <xtce:Enumeration value="0" label="No_Content"/> <xtce:Enumeration value="1" label="ECSS_SpacePacket1"/> <xtce:Enumeration value="2" label="ECSS_SpacePacket2"/> <xtce:Enumeration value="3" label="ECSS_SpacePacket3"/> <xtce:Enumeration value="4" label="ECSS_SpacePacket4"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> </xtce:ParameterTypeSet> <xtce:ParameterSet> <xtce:Parameter name="TM_CHECKSUM_TYPE" parameterTypeRef="TM_CHECKSUMType" shortDescription="ECSS PUS Constant"> <xtce:LongDescription>This indicates the presence and (if present) the type of checksumused for checking the integrity of telemetry source packets for the given application process. The type shall be either an ISO standard checksum or a Cyclic Redundancy Check (CRC).</xtce:LongDescription> <xtce:ParameterProperties dataSource="constant" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="APPL_TIME_CODE" parameterTypeRef="APPL_TIME_CODEType" shortDescription="ECSS PUS Constant"> <xtce:LongDescription>This mission constant identifies the presence or absence of the telemetry source packet time field as well as the time format (CUC or CDS) and the encoding of the time field. There is one such mission constant for each on-board application process.</xtce:LongDescription> <xtce:ParameterProperties dataSource="constant" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="CCSDSSCID" parameterTypeRef="CCSDSSCIDType"> <xtce:ParameterProperties dataSource="local"/> </xtce:Parameter> <xtce:Parameter name="CCSDSVCID" parameterTypeRef="CCSDSVCIDType"> <xtce:ParameterProperties dataSource="local"/> </xtce:Parameter> <xtce:Parameter name="SomeParameter" parameterTypeRef="SomeParameter_Type"/> <xtce:Parameter name="BrokenParameter1" parameterTypeRef="Type_Does_Not_Exist"/> <!-- The following element is a deliberate error for testing --> <xtce:Parameter name="BrokenParameter2" parameterRef="Schema_Attribute_Name_Error"/> <xtce:Parameter name="CCSDS_Packet_ID" parameterTypeRef="CCSDS_Packet_ID_Type"/> <xtce:Parameter name="CCSDS_Packet_Sequence" parameterTypeRef="CCSDS_Packet_Sequence_Type"/> <xtce:Parameter name="CCSDS_Packet_Length" parameterTypeRef="CCSDSPacketLengthType"/> <xtce:Parameter name="PUS_Data_Field_Header" parameterTypeRef="PUS_Data_Field_Header_Type"/> <xtce:Parameter name="PUS_Time" parameterTypeRef="PUSTimeType"/> <xtce:Parameter name="PUS_Error_Control_Field" parameterTypeRef="PUSErrorControlFieldType"/> <xtce:Parameter name="Mission" parameterTypeRef="MissionType"> <xtce:ParameterProperties dataSource="local"/> </xtce:Parameter> <xtce:Parameter name="PUS_Structure_ID" parameterTypeRef="PUS_Structure_ID_Type" shortDescription="The PUS Structure ID identifies a specific Housekeeping Parameter content in service (3,25)"/> </xtce:ParameterSet> <xtce:ContainerSet> <xtce:SequenceContainer abstract="true" name="CCSDSPacket" shortDescription="Super-container for all CCSDS telemetry and telecommand packets"> <xtce:LongDescription>Structure of this container is standardized. This representation was borrowed for the ECSS PUS Document E-70-41A, which restates the general CCSDS standard for the CCSDS header.</xtce:LongDescription> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="CCSDS_Packet_ID"/> <xtce:ParameterRefEntry parameterRef="CCSDS_Packet_Sequence"/> <xtce:ParameterRefEntry parameterRef="CCSDS_Packet_Length"/> </xtce:EntryList> </xtce:SequenceContainer> <xtce:SequenceContainer abstract="true" name="CCSDSTelemetryPacket" shortDescription="Super-container for all CCSDS telemetry packets"> <xtce:LongDescription>Restricted based on the two identifying values in the standard that are a general requirement for a telemetry packet.</xtce:LongDescription> <xtce:EntryList/> <xtce:BaseContainer containerRef="CCSDSPacket"> <xtce:RestrictionCriteria> <xtce:ComparisonList> <xtce:Comparison value="0" parameterRef="CCSDS_Packet_ID/Version"/> <xtce:Comparison value="TM" parameterRef="CCSDS_Packet_ID/Type"/> </xtce:ComparisonList> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer abstract="true" name="CCSDSPUSTelemetryPacket"> <xtce:LongDescription>Super-container for all CCSDS/ECSS PUS telemetry packets.</xtce:LongDescription> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="PUS_Data_Field_Header"/> <xtce:ParameterRefEntry parameterRef="PUS_Time"> <xtce:IncludeCondition> <xtce:Comparison parameterRef="APPL_TIME_CODE" value="NotUsed" useCalibratedValue="true" comparisonOperator="!="/> </xtce:IncludeCondition> </xtce:ParameterRefEntry> <!-- this is where the PUS data field goes --> <xtce:ParameterRefEntry parameterRef="PUS_Error_Control_Field"> <xtce:LocationInContainerInBits referenceLocation="containerEnd"> <xtce:FixedValue>16</xtce:FixedValue> </xtce:LocationInContainerInBits> <xtce:IncludeCondition> <xtce:Comparison parameterRef="TM_CHECKSUM_TYPE" value="NotUsed" useCalibratedValue="true" comparisonOperator="!="/> </xtce:IncludeCondition> </xtce:ParameterRefEntry> </xtce:EntryList> <xtce:BaseContainer containerRef="CCSDSTelemetryPacket"> <xtce:RestrictionCriteria> <xtce:Comparison parameterRef="CCSDS_Packet_ID/SecHdrFlag" value="Present"/> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> </xtce:ContainerSet> <xtce:StreamSet> <xtce:VariableFrameStream name="CCSDS-TM" shortDescription="CCSDS Telemetry Stream"> <xtce:ContainerRef containerRef="CCSDSTelemetryPacket"/> <xtce:SyncStrategy> <xtce:Flag/> </xtce:SyncStrategy> </xtce:VariableFrameStream> </xtce:StreamSet> </xtce:TelemetryMetaData> <xtce:CommandMetaData> <xtce:ParameterTypeSet> <xtce:EnumeratedParameterType name="TC_CHECKSUMType" initialValue="NotUsed"> <xtce:UnitSet/> <xtce:EnumerationList> <xtce:Enumeration label="NotUsed" value="0"/> <xtce:Enumeration label="CRC" value="1"/> <xtce:Enumeration label="Checksum" value="2"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> </xtce:ParameterTypeSet> <xtce:ParameterSet> <xtce:Parameter parameterTypeRef="TC_CHECKSUMType" name="TC_CHECKSUM"> <xtce:ParameterProperties dataSource="constant" readOnly="true"/> </xtce:Parameter> </xtce:ParameterSet> <xtce:MetaCommandSet> <xtce:MetaCommand abstract="true" name="CCSDSTelecommand"> <xtce:LongDescription>Base telecommand structure for all CCSDS based telecommands.</xtce:LongDescription> <xtce:CommandContainer name="CCSDSTelecommandPacket"> <xtce:LongDescription>Super-container for all CCSDS telecommand packets.</xtce:LongDescription> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="CCSDS_Packet_ID"/> <xtce:ParameterRefEntry parameterRef="CCSDS_Packet_Sequence"/> <xtce:ParameterRefEntry parameterRef="CCSDS_Packet_Length"/> </xtce:EntryList> </xtce:CommandContainer> </xtce:MetaCommand> <xtce:MetaCommand abstract="true" name="CCSDSPUSTelecommand"> <xtce:LongDescription>Base telecommand structure for all CCSDS/ECSS PUS based telecommand packets.</xtce:LongDescription> <xtce:BaseMetaCommand metaCommandRef="CCSDSTelecommand"/> <xtce:CommandContainer name="CCSDSPUSTelecommand"> <xtce:EntryList/> <!-- need to fill these in --> <xtce:BaseContainer containerRef="CCSDSTelecommandPacket"> <xtce:RestrictionCriteria> <xtce:Comparison parameterRef="CCSDS_Packet_ID/SecHdrFlag" value="Present"/> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:CommandContainer> </xtce:MetaCommand> <xtce:MetaCommand abstract="true" name="CCSDSDirectTelecommand"> <xtce:LongDescription>Base telecommand structure for all CCSDS based hardware direct telecommand packets.</xtce:LongDescription> <xtce:BaseMetaCommand metaCommandRef="CCSDSTelecommand"/> <xtce:CommandContainer name="CCSDSDirectTelecommand"> <xtce:EntryList/> <xtce:BaseContainer containerRef="CCSDSTelecommandPacket"> <xtce:RestrictionCriteria> <xtce:Comparison parameterRef="CCSDS_Packet_ID/SecHdrFlag" value="NotPresent"/> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:CommandContainer> </xtce:MetaCommand> </xtce:MetaCommandSet> <xtce:CommandContainerSet> <xtce:CommandContainer name="CCSDSTelecommandPacket" shortDescription="Super-container for all CCSDS telecommand packets"> <xtce:LongDescription>Restricted based on the two identifying values in the standard that are a general requirement for a telemetry packet.</xtce:LongDescription> <xtce:EntryList/> <xtce:BaseContainer containerRef="CCSDSPacket"> <xtce:RestrictionCriteria> <xtce:ComparisonList> <xtce:Comparison value="0" parameterRef="CCSDS_Packet_ID/Version"/> <xtce:Comparison value="TC" parameterRef="CCSDS_Packet_ID/Type"/> </xtce:ComparisonList> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:CommandContainer> </xtce:CommandContainerSet> </xtce:CommandMetaData> <xtce:SpaceSystem name="SC001" shortDescription="This is the first spacecraft in the BogusSAT system"> <xtce:LongDescription>This space system contains the telemetry packets that comprise TM parameters from the various subsystems on the satellite.</xtce:LongDescription> <xtce:TelemetryMetaData> <xtce:ContainerSet> <xtce:SequenceContainer name="CCSDS_SpacePacket1"> <xtce:EntryList> <!-- Demonstrate the UNIX style path stuff working --> <xtce:ParameterRefEntry parameterRef="BusElectronics/Battery_Voltage"/> <xtce:ParameterRefEntry parameterRef="BusElectronics/Battery_Current"/> <xtce:ParameterRefEntry parameterRef="BusElectronics/../BusElectronics/Battery_Charge_Mode"/> <xtce:ParameterRefEntry parameterRef="../SomeParameter"/> <xtce:ParameterRefEntry parameterRef="/BogusSAT/SC001/BusElectronics/Solar_Array_Voltage_1"/> <xtce:ParameterRefEntry parameterRef="./BusElectronics/Solar_Array_Voltage_2"/> </xtce:EntryList> <xtce:BaseContainer containerRef="/BogusSAT/CCSDSTelemetryPacket"> <xtce:RestrictionCriteria> <xtce:ComparisonList> <xtce:Comparison value="NotPresent" parameterRef="CCSDS_Packet_ID/SecHdrFlag"/> <xtce:Comparison value="1" parameterRef="CCSDS_Packet_ID/APID"/> </xtce:ComparisonList> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer name="CCSDS_SpacePacket2"> <xtce:EntryList> <!-- Demonstrate the IncludeConditions working --> <xtce:ParameterRefEntry parameterRef="BusElectronics/Solar_Array_Voltage_1_State"/> <xtce:ParameterRefEntry parameterRef="BusElectronics/Solar_Array_Voltage_1"> <xtce:IncludeCondition> <xtce:Comparison parameterRef="BusElectronics/Solar_Array_Voltage_1_State" value="ON" useCalibratedValue="true"/> </xtce:IncludeCondition> </xtce:ParameterRefEntry> <xtce:ParameterRefEntry parameterRef="BusElectronics/Solar_Array_Voltage_2_State"/> <xtce:ParameterRefEntry parameterRef="BusElectronics/Solar_Array_Voltage_2"> <xtce:IncludeCondition> <xtce:Comparison parameterRef="BusElectronics/Solar_Array_Voltage_2_State" value="1" useCalibratedValue="false"/> </xtce:IncludeCondition> </xtce:ParameterRefEntry> <!-- Empty space above will not appear since the referene location is previous entry, now fix the position --> <xtce:ParameterRefEntry parameterRef="BusElectronics/Battery_Voltage"> <xtce:LocationInContainerInBits referenceLocation="containerStart"> <xtce:FixedValue>88</xtce:FixedValue> </xtce:LocationInContainerInBits> </xtce:ParameterRefEntry> <xtce:ParameterRefEntry parameterRef="BusElectronics/Battery_Current"/> </xtce:EntryList> <xtce:BaseContainer containerRef="/BogusSAT/CCSDSTelemetryPacket"> <xtce:RestrictionCriteria> <xtce:ComparisonList> <xtce:Comparison value="NotPresent" parameterRef="CCSDS_Packet_ID/SecHdrFlag"/> <xtce:Comparison value="2" parameterRef="CCSDS_Packet_ID/APID"/> </xtce:ComparisonList> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer name="CCSDS_SpacePacket3"> <xtce:EntryList> <!-- Demonstrate the Fixed Repeat working --> <xtce:ParameterRefEntry parameterRef="Payload1/Basic_string_uint32"> <xtce:RepeatEntry> <xtce:Count> <xtce:FixedValue>5</xtce:FixedValue> </xtce:Count> </xtce:RepeatEntry> </xtce:ParameterRefEntry> </xtce:EntryList> <xtce:BaseContainer containerRef="/BogusSAT/CCSDSTelemetryPacket"> <xtce:RestrictionCriteria> <xtce:ComparisonList> <xtce:Comparison value="NotPresent" parameterRef="CCSDS_Packet_ID/SecHdrFlag"/> <xtce:Comparison value="3" parameterRef="CCSDS_Packet_ID/APID"/> </xtce:ComparisonList> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer name="CCSDS_SpacePacket4"> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="Payload1/Payload_1_State"/> <xtce:ContainerRefEntry containerRef="Payload1/IncludedContainer1"> <xtce:IncludeCondition> <xtce:Comparison parameterRef="Payload1/Payload_1_State" value="ON"/> </xtce:IncludeCondition> </xtce:ContainerRefEntry> <xtce:ContainerRefEntry containerRef="Payload1/IncludedContainer2"/> </xtce:EntryList> <xtce:BaseContainer containerRef="/BogusSAT/CCSDSTelemetryPacket"> <xtce:RestrictionCriteria> <xtce:ComparisonList> <xtce:Comparison value="NotPresent" parameterRef="CCSDS_Packet_ID/SecHdrFlag"/> <xtce:Comparison value="4" parameterRef="CCSDS_Packet_ID/APID"/> </xtce:ComparisonList> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer name="CCSDS_SpacePacket5"> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="Payload1/Payload_1_State"/> <xtce:ParameterRefEntry parameterRef="BusElectronics/Solar_Array_Voltage_1_State"/> <xtce:ContainerRefEntry containerRef="Payload1/IncludedContainer3"> <xtce:IncludeCondition> <xtce:Comparison parameterRef="Payload1/Payload_1_State" value="ON"/> </xtce:IncludeCondition> </xtce:ContainerRefEntry> <xtce:ContainerRefEntry containerRef="Payload1/IncludedContainer1"/> </xtce:EntryList> <xtce:BaseContainer containerRef="/BogusSAT/CCSDSTelemetryPacket"> <xtce:RestrictionCriteria> <xtce:ComparisonList> <xtce:Comparison value="NotPresent" parameterRef="CCSDS_Packet_ID/SecHdrFlag"/> <xtce:Comparison value="5" parameterRef="CCSDS_Packet_ID/APID"/> </xtce:ComparisonList> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer name="CCSDS_SpacePacket6"> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="Payload1/Payload_1_State"/> <xtce:ParameterRefEntry parameterRef="BusElectronics/Solar_Array_Voltage_1_State"/> <xtce:ContainerRefEntry containerRef="Payload1/IncludedContainer3"/> <xtce:ArrayParameterRefEntry parameterRef="Payload1/PAYLOAD_ANTENNA_POINTING_ARRAY1"> <xtce:DimensionList> <xtce:Size> <xtce:FixedValue>9</xtce:FixedValue> </xtce:Size> </xtce:DimensionList> </xtce:ArrayParameterRefEntry> <xtce:ArrayParameterRefEntry parameterRef="Payload1/PAYLOAD_ANTENNA_POINTING_ARRAY2"> <xtce:LocationInContainerInBits referenceLocation="previousEntry"> <xtce:FixedValue>8</xtce:FixedValue> </xtce:LocationInContainerInBits> <xtce:RepeatEntry> <xtce:Count> <xtce:FixedValue>2</xtce:FixedValue> </xtce:Count> </xtce:RepeatEntry> <xtce:DimensionList> <xtce:Size> <xtce:FixedValue>9</xtce:FixedValue> </xtce:Size> </xtce:DimensionList> </xtce:ArrayParameterRefEntry> <xtce:ContainerRefEntry containerRef="Payload1/IncludedContainer1"/> </xtce:EntryList> <xtce:BaseContainer containerRef="/BogusSAT/CCSDSTelemetryPacket"> <xtce:RestrictionCriteria> <xtce:ComparisonList> <xtce:Comparison value="NotPresent" parameterRef="CCSDS_Packet_ID/SecHdrFlag"/> <xtce:Comparison value="6" parameterRef="CCSDS_Packet_ID/APID"/> </xtce:ComparisonList> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer name="ECSS_Service_1_Subservice_1" shortDescription="Telecommand Acceptance Report - Success (1,1)"> <!--xtce:LongDescription>Report of acceptance of a telecommand packet. This example is based on the design presented in document ECSS-E-70-41A (30 Jan 2003).</xtce:LongDescription--> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="Commanding/TC_Packet_ID"/> <xtce:ParameterRefEntry parameterRef="Commanding/TC_Packet_Sequence_Control"/> </xtce:EntryList> <xtce:BaseContainer containerRef="/BogusSAT/CCSDSPUSTelemetryPacket"> <xtce:RestrictionCriteria> <xtce:ComparisonList> <xtce:Comparison value="Present" parameterRef="CCSDS_Packet_ID/SecHdrFlag"/> <xtce:Comparison value="100" parameterRef="CCSDS_Packet_ID/APID"/> <xtce:Comparison value="0" parameterRef="PUS_Data_Field_Header/Spare1"/> <xtce:Comparison value="1" parameterRef="PUS_Data_Field_Header/Version"/> <xtce:Comparison value="0" parameterRef="PUS_Data_Field_Header/Spare4"/> <xtce:Comparison value="1" parameterRef="PUS_Data_Field_Header/Service"/> <xtce:Comparison value="1" parameterRef="PUS_Data_Field_Header/Subservice"/> </xtce:ComparisonList> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer name="ECSS_Service_1_Subservice_2" shortDescription="Telecommand Acceptance Report - Failure (1,2)"> <xtce:LongDescription>Report of refused/failed acceptance of a telecommand packet. This example is based on the design presented in document ECSS-E-70-41A (30 Jan 2003).</xtce:LongDescription> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="Commanding/TC_Packet_ID"/> <xtce:ParameterRefEntry parameterRef="Commanding/TC_Packet_Sequence_Control"/> <xtce:ParameterRefEntry parameterRef="Commanding/TC_Accept_Failure_Code"/> <xtce:ParameterRefEntry parameterRef="Commanding/TC_Parameter_Count"/> <xtce:ParameterRefEntry parameterRef="Commanding/TC_Parameter_Data"> <xtce:RepeatEntry> <xtce:Count> <xtce:DynamicValue> <xtce:ParameterInstanceRef parameterRef="Commanding/TC_Parameter_Count" useCalibratedValue="true"/> </xtce:DynamicValue> </xtce:Count> </xtce:RepeatEntry> </xtce:ParameterRefEntry> </xtce:EntryList> <xtce:BaseContainer containerRef="/BogusSAT/CCSDSPUSTelemetryPacket"> <xtce:RestrictionCriteria> <xtce:ComparisonList> <xtce:Comparison value="Present" parameterRef="CCSDS_Packet_ID/SecHdrFlag"/> <xtce:Comparison value="100" parameterRef="CCSDS_Packet_ID/APID"/> <xtce:Comparison value="0" parameterRef="PUS_Data_Field_Header/Spare1"/> <xtce:Comparison value="1" parameterRef="PUS_Data_Field_Header/Version"/> <xtce:Comparison value="0" parameterRef="PUS_Data_Field_Header/Spare4"/> <xtce:Comparison value="1" parameterRef="PUS_Data_Field_Header/Service"/> <xtce:Comparison value="2" parameterRef="PUS_Data_Field_Header/Subservice"/> </xtce:ComparisonList> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer name="ECSS_Service_3_Subservice_25" abstract="true" shortDescription="Housekeeping Parameter Report (3,25)"> <xtce:LongDescription>The service 3,25 packet of the ECSS PUS contains the housekeeping telemetry subpackets, switched with the PUS_Structure_ID parameter. This example is based on the design presented in document ECSS-E-70-41A (30 Jan 2003).</xtce:LongDescription> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="../PUS_Structure_ID"/> </xtce:EntryList> <xtce:BaseContainer containerRef="/BogusSAT/CCSDSPUSTelemetryPacket"> <xtce:RestrictionCriteria> <xtce:ComparisonList> <xtce:Comparison value="Present" parameterRef="CCSDS_Packet_ID/SecHdrFlag"/> <xtce:Comparison value="100" parameterRef="CCSDS_Packet_ID/APID"/> <xtce:Comparison value="0" parameterRef="PUS_Data_Field_Header/Spare1"/> <xtce:Comparison value="1" parameterRef="PUS_Data_Field_Header/Version"/> <xtce:Comparison value="0" parameterRef="PUS_Data_Field_Header/Spare4"/> <xtce:Comparison value="3" parameterRef="PUS_Data_Field_Header/Service"/> <xtce:Comparison value="25" parameterRef="PUS_Data_Field_Header/Subservice"/> </xtce:ComparisonList> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer name="ECSS_Service_6_Subservice_6" shortDescription="Memory Dump using Absolute Addresses Report (6,6)"> <xtce:LongDescription>The packet defines the contents of a response to the telecommand "Dump Memory using Absolute Addresses (6,5)". This assumes that only 1 address+data can be dumped at a time. The length of the data is variable and the checksum for the data is used. This example is based on the design presented in document ECSS-E-70-41A (30 Jan 2003).</xtce:LongDescription> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="Memory/Dump_Memory_ID"/> <!-- xtce:ParameterRefEntry parameterRef="Memory/Dump_Memory_Count_Areas"/ --> <xtce:ParameterRefEntry parameterRef="Memory/Dump_Memory_Address"/> <xtce:ParameterRefEntry parameterRef="Memory/Dump_Memory_Length"/> <xtce:ArrayParameterRefEntry parameterRef="Memory/Dump_Memory_Data"> <xtce:DimensionList> <xtce:Size> <xtce:DynamicValue> <xtce:ParameterInstanceRef parameterRef="Memory/Dump_Memory_Length" useCalibratedValue="true"/> </xtce:DynamicValue> </xtce:Size> </xtce:DimensionList> </xtce:ArrayParameterRefEntry> <xtce:ParameterRefEntry parameterRef="Memory/Dump_Memory_Chksum"/> </xtce:EntryList> <xtce:BaseContainer containerRef="/BogusSAT/CCSDSPUSTelemetryPacket"> <xtce:RestrictionCriteria> <xtce:ComparisonList> <xtce:Comparison value="Present" parameterRef="CCSDS_Packet_ID/SecHdrFlag"/> <xtce:Comparison value="100" parameterRef="CCSDS_Packet_ID/APID"/> <xtce:Comparison value="0" parameterRef="PUS_Data_Field_Header/Spare1"/> <xtce:Comparison value="1" parameterRef="PUS_Data_Field_Header/Version"/> <xtce:Comparison value="0" parameterRef="PUS_Data_Field_Header/Spare4"/> <xtce:Comparison value="6" parameterRef="PUS_Data_Field_Header/Service"/> <xtce:Comparison value="6" parameterRef="PUS_Data_Field_Header/Subservice"/> </xtce:ComparisonList> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer name="ECSS_SpacePacket1"> <xtce:EntryList> <!-- Demonstrate the UNIX style path stuff working --> <xtce:ParameterRefEntry parameterRef="BusElectronics/Battery_Voltage"/> <xtce:ParameterRefEntry parameterRef="BusElectronics/Battery_Current"/> <xtce:ParameterRefEntry parameterRef="BusElectronics/../BusElectronics/Battery_Charge_Mode"/> <xtce:ParameterRefEntry parameterRef="../SomeParameter"/> <xtce:ParameterRefEntry parameterRef="/BogusSAT/SC001/BusElectronics/Solar_Array_Voltage_1"/> <xtce:ParameterRefEntry parameterRef="./BusElectronics/Solar_Array_Voltage_2"/> </xtce:EntryList> <xtce:BaseContainer containerRef="ECSS_Service_3_Subservice_25"> <xtce:RestrictionCriteria> <xtce:ComparisonList> <xtce:Comparison value="ECSS_SpacePacket1" parameterRef="../PUS_Structure_ID"/> </xtce:ComparisonList> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer name="ECSS_SpacePacket2"> <xtce:EntryList> <!-- Demonstrate the UNIX style path stuff working --> <xtce:ParameterRefEntry parameterRef="BusElectronics/Battery_Voltage"/> <xtce:ParameterRefEntry parameterRef="BusElectronics/Battery_Current"/> <xtce:ParameterRefEntry parameterRef="BusElectronics/Flag_Parameter"/> <xtce:ParameterRefEntry parameterRef="BusElectronics/Optional_Parameter"> <xtce:IncludeCondition> <xtce:Comparison parameterRef="BusElectronics/Flag_Parameter" value="1"/> </xtce:IncludeCondition> </xtce:ParameterRefEntry> <xtce:ParameterRefEntry parameterRef="/BogusSAT/SC001/BusElectronics/Solar_Array_Voltage_1"/> <xtce:ParameterRefEntry parameterRef="./BusElectronics/Solar_Array_Voltage_2"/> </xtce:EntryList> <xtce:BaseContainer containerRef="ECSS_Service_3_Subservice_25"> <xtce:RestrictionCriteria> <xtce:ComparisonList> <xtce:Comparison value="ECSS_SpacePacket2" parameterRef="../PUS_Structure_ID"/> </xtce:ComparisonList> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> </xtce:ContainerSet> </xtce:TelemetryMetaData> <xtce:SpaceSystem name="Commanding" shortDescription="Commanding Subsystem Parameters"> <xtce:TelemetryMetaData> <xtce:ParameterTypeSet> <xtce:EnumeratedParameterType name="TC_Accept_Failure_Code_Type"> <xtce:LongDescription>The code indicates the reason for the failure of the telecommand at this verification stage.</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="16"/> <xtce:EnumerationList> <xtce:Enumeration value="0" label="ILLEGAL_APID"/> <xtce:Enumeration value="1" label="INCOMPLETE_PACKET"/> <xtce:Enumeration value="2" label="INCORRECT_CHECKSUM"/> <xtce:Enumeration value="3" label="ILLEGAL_PACKET_TYPE"/> <xtce:Enumeration value="4" label="ILLEGAL_PACKET_SUBTYPE"/> <xtce:Enumeration value="5" label="INCONSISTENT_APPL_DATA"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> </xtce:ParameterTypeSet> <xtce:ParameterSet> <xtce:Parameter name="TC_Packet_ID" parameterTypeRef="/BogusSAT/Generic_16bits_unsigned" shortDescription="TC Packet Identifier"> <xtce:LongDescription>This is a copy of the corresponding fields from the packet header of the telecommand to which this verification packet relates.</xtce:LongDescription> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="TC_Packet_Sequence_Control" parameterTypeRef="/BogusSAT/Generic_16bits_unsigned" shortDescription="TC Packet Sequence Number"> <xtce:LongDescription>This is a copy of the corresponding fields from the packet header of the telecommand to which this verification packet relates.</xtce:LongDescription> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="TC_Accept_Failure_Code" parameterTypeRef="TC_Accept_Failure_Code_Type" shortDescription="Acceptance Failure Reason"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="TC_Parameter_Count" parameterTypeRef="/BogusSAT/Generic_8bits_unsigned" shortDescription="TC Packet Parameters (specific to the TC)"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="TC_Parameter_Data" parameterTypeRef="/BogusSAT/Generic_8bits_unsigned" shortDescription="Unrealistic repeating list of 32 bit parameter data"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> </xtce:ParameterSet> </xtce:TelemetryMetaData> </xtce:SpaceSystem> <xtce:SpaceSystem name="Memory" shortDescription="Memory Management Subsystem Parameters"> <xtce:TelemetryMetaData> <xtce:ParameterTypeSet> <xtce:EnumeratedParameterType name="Dump_Memory_ID_Type"> <xtce:LongDescription>The names of the memory areas on the physical processor.</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="8"/> <xtce:EnumerationList> <xtce:Enumeration value="0" label="RAM"/> <xtce:Enumeration value="1" label="PRI_EEPROM"/> <xtce:Enumeration value="2" label="RED_EEPROM"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:IntegerParameterType name="Dump_Memory_Length_Type"> <xtce:UnitSet> <xtce:Unit>bytes</xtce:Unit> </xtce:UnitSet> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="16"/> </xtce:IntegerParameterType> <xtce:ArrayParameterType name="Dump_Memory_Data_Type" arrayTypeRef="/BogusSAT/Generic_8bits_unsigned" numberOfDimensions="1"/> </xtce:ParameterTypeSet> <xtce:ParameterSet> <xtce:Parameter name="Dump_Memory_ID" parameterTypeRef="Dump_Memory_ID_Type" shortDescription="Physical Memory Area Name"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="Dump_Memory_Address" parameterTypeRef="/BogusSAT/Generic_32bits_unsigned" shortDescription="Source address of the physical memory where the data block originates"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="Dump_Memory_Length" parameterTypeRef="Dump_Memory_Length_Type" shortDescription="Length of the data being dumped in the data field"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="Dump_Memory_Data" parameterTypeRef="Dump_Memory_Data_Type" shortDescription="The binary data being dumped from the source address"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="Dump_Memory_Chksum" parameterTypeRef="/BogusSAT/Generic_16bits_unsigned" shortDescription="ISO standard 16 bit checksum for the data block being dumped"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> </xtce:ParameterSet> </xtce:TelemetryMetaData> </xtce:SpaceSystem> <xtce:SpaceSystem name="Onboard_Tables" shortDescription="Tables of data onboard that are not part of the regular TM stream"> <xtce:TelemetryMetaData> <xtce:ParameterTypeSet> <xtce:FloatParameterType name="Float32_Offset"> <xtce:LongDescription>A long description for this type</xtce:LongDescription> <xtce:UnitSet/> <xtce:FloatDataEncoding encoding="IEEE754_1985" sizeInBits="32"/> <xtce:ValidRange minInclusive="-100.0" maxInclusive="100.0"/> </xtce:FloatParameterType> <xtce:IntegerParameterType name="Uint32_Offset"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="twosComplement" sizeInBits="32"/> <xtce:ValidRange minInclusive="-50" maxInclusive="40"/> </xtce:IntegerParameterType> <xtce:FloatParameterType name="Float64_Offset"> <xtce:UnitSet/> <xtce:FloatDataEncoding encoding="IEEE754_1985" sizeInBits="64"/> <xtce:ValidRange minInclusive="-80.0" maxInclusive="75.0"/> </xtce:FloatParameterType> <xtce:EnumeratedParameterType name="Start_Mode_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="8"/> <xtce:EnumerationList> <xtce:Enumeration value="0" label="DIAGNOSTIC"/> <xtce:Enumeration value="1" label="NORMAL"/> <xtce:Enumeration value="2" label="SAFEHOLD"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> </xtce:ParameterTypeSet> <xtce:ParameterSet> <xtce:Parameter name="Battery_Voltage_Offset" initialValue="2.5" parameterTypeRef="Float32_Offset" shortDescription="Correction for battery voltage measurements"> <xtce:LongDescription>Extended discussion about the nature of the battery voltage offset</xtce:LongDescription> <xtce:ParameterProperties dataSource="telemetered" readOnly="false"> <xtce:PhysicalAddressSet> <xtce:PhysicalAddress sourceName="CPU1" sourceAddress="0000f010"/> </xtce:PhysicalAddressSet> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Solar_Array_Voltage_1_Offset" initialValue="2" parameterTypeRef="Uint32_Offset" shortDescription="Correction for solar array voltage measurements"> <xtce:ParameterProperties dataSource="telemetered" readOnly="false"> <xtce:PhysicalAddressSet> <xtce:PhysicalAddress sourceName="CPU1" sourceAddress="0000f016"/> </xtce:PhysicalAddressSet> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Solar_Array_Voltage_2_Offset" initialValue="1" parameterTypeRef="Uint32_Offset" shortDescription="Correction for solar array voltage measurements"> <xtce:ParameterProperties dataSource="telemetered" readOnly="false"> <xtce:PhysicalAddressSet> <xtce:PhysicalAddress sourceName="CPU1" sourceAddress="0000f01a"/> </xtce:PhysicalAddressSet> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Battery_Current_Offset" initialValue="-1.5" parameterTypeRef="Float64_Offset" shortDescription="Correction for battery current measurements"> <xtce:ParameterProperties dataSource="telemetered" readOnly="false"> <xtce:PhysicalAddressSet> <xtce:PhysicalAddress sourceName="CPU1" sourceAddress="0000f020"/> </xtce:PhysicalAddressSet> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Default_CPU_Start_Mode" initialValue="NORMAL" parameterTypeRef="Start_Mode_Type" shortDescription="Starting mode for the onboard processor"> <xtce:ParameterProperties dataSource="telemetered" readOnly="false"> <xtce:PhysicalAddressSet> <xtce:PhysicalAddress sourceName="CPU1" sourceAddress="0000f028"/> </xtce:PhysicalAddressSet> </xtce:ParameterProperties> </xtce:Parameter> </xtce:ParameterSet> <xtce:ContainerSet> <xtce:SequenceContainer name="Calibration_Offsets" shortDescription="This is an onboard table for upload/download that contains configuration parameters"> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="Battery_Voltage_Offset"/> <xtce:ParameterRefEntry parameterRef="Solar_Array_Voltage_1_Offset"> <xtce:LocationInContainerInBits referenceLocation="previousEntry"> <xtce:FixedValue>16</xtce:FixedValue> </xtce:LocationInContainerInBits> </xtce:ParameterRefEntry> <xtce:ParameterRefEntry parameterRef="Solar_Array_Voltage_2_Offset"/> <xtce:ParameterRefEntry parameterRef="Battery_Current_Offset"> <xtce:LocationInContainerInBits referenceLocation="containerStart"> <xtce:FixedValue>112</xtce:FixedValue> </xtce:LocationInContainerInBits> </xtce:ParameterRefEntry> <xtce:ParameterRefEntry parameterRef="Default_CPU_Start_Mode"/> </xtce:EntryList> </xtce:SequenceContainer> </xtce:ContainerSet> <xtce:StreamSet> <xtce:VariableFrameStream name="CALTABLE" shortDescription="This is an onboard table for upload/download that contains configuration parameters"> <xtce:ContainerRef containerRef="Calibration_Offsets"/> <xtce:SyncStrategy> <xtce:Flag/> </xtce:SyncStrategy> </xtce:VariableFrameStream> </xtce:StreamSet> </xtce:TelemetryMetaData> </xtce:SpaceSystem> <xtce:SpaceSystem name="Onboard_Processor_Config" shortDescription="This is the onboard processor configuration parameters uploaded and/or downloaded as binary data for reconfiguration"> <xtce:TelemetryMetaData> <xtce:ParameterTypeSet> <xtce:EnumeratedParameterType name="Table_Processor_ID_Type"> <xtce:LongDescription>The processor ID value of the table is not used by the onboard processor except at transfer time for data assurance and as such is not a part of the memory image onboard.</xtce:LongDescription> <xtce:UnitSet/> <xtce:IntegerDataEncoding/> <xtce:EnumerationList> <xtce:Enumeration value="0" label="NOT_YET_SET"/> <xtce:Enumeration value="1" label="PROCESSOR1"/> <xtce:Enumeration value="2" label="PROCESSOR2"/> <xtce:Enumeration value="3" label="PROCESSOR3"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:BinaryParameterType name="Table_CRC_Value_Type" shortDescription="CRC-16-CCITT"> <xtce:LongDescription>The CRC value of the table is not used by the onboard processor except at transfer time for data assurance and as such is not a part of the memory image onboard.</xtce:LongDescription> <xtce:UnitSet/> <xtce:BinaryDataEncoding> <xtce:SizeInBits> <xtce:FixedValue>16</xtce:FixedValue> </xtce:SizeInBits> </xtce:BinaryDataEncoding> </xtce:BinaryParameterType> <xtce:AggregateParameterType name="Config_Log_Levels_Type"> <xtce:MemberList> <xtce:Member name="COREINF" typeRef="Log_Level_Type" shortDescription="Log level for Common Infrastructure Software"/> <xtce:Member name="ANTCTRL" typeRef="Log_Level_Type" shortDescription="Log level for Payload Antenna Control Software"/> <xtce:Member name="TCMGMNT" typeRef="Log_Level_Type" shortDescription="Log level for Telecommand Management Software"/> <xtce:Member name="TIME" typeRef="Log_Level_Type" shortDescription="Log level for Time Keeping Software"/> <xtce:Member name="TMMGMNT" typeRef="Log_Level_Type" shortDescription="Log level for Telemetry Management Software"/> <xtce:Member name="INTERFACE" typeRef="Log_Level_Type" shortDescription="Log level for Bus and Payload Hardware Interface Software"/> <xtce:Member name="MW1553" typeRef="Log_Level_Type" shortDescription="Log level for 1553 Communications Interface Software"/> </xtce:MemberList> </xtce:AggregateParameterType> <xtce:EnumeratedParameterType initialValue="warning" name="Log_Level_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="4"/> <xtce:EnumerationList> <xtce:Enumeration value="0" label="debug"/> <xtce:Enumeration value="1" label="info"/> <xtce:Enumeration value="2" label="warning"/> <xtce:Enumeration value="3" label="error"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:IntegerParameterType initialValue="5" signed="false" name="Config_Watchdog_Type"> <xtce:UnitSet> <xtce:Unit>seconds</xtce:Unit> </xtce:UnitSet> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="16"/> <xtce:ValidRange minInclusive="1" maxInclusive="300"/> </xtce:IntegerParameterType> <xtce:AggregateParameterType name="Config_PROM_Access_Type"> <xtce:LongDescription>PROM programming and access timing constraints</xtce:LongDescription> <xtce:MemberList> <xtce:Member name="Read" typeRef="PROM_Programming_Access_Timing_Type"/> <xtce:Member name="Write" typeRef="PROM_Programming_Access_Timing_Type"/> <xtce:Member name="Erase" typeRef="PROM_Programming_Access_Timing_Type"/> <xtce:Member name="Lock" typeRef="PROM_Programming_Access_Timing_Type"/> </xtce:MemberList> </xtce:AggregateParameterType> <xtce:IntegerParameterType initialValue="100" signed="false" name="PROM_Programming_Access_Timing_Type"> <xtce:UnitSet> <xtce:Unit>microseconds</xtce:Unit> </xtce:UnitSet> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="16"/> <xtce:ValidRange minInclusive="10" maxInclusive="50000"/> </xtce:IntegerParameterType> <xtce:AggregateParameterType name="Config_Self_Tests_Type"> <xtce:MemberList> <xtce:Member name="pad_2bits" typeRef="Unused_2bits_Type"/> <xtce:Member name="Antenna" typeRef="Self_Test_Type"/> <xtce:Member name="CPU" typeRef="Self_Test_Type"/> <xtce:Member name="RAM" typeRef="Self_Test_Type"/> <xtce:Member name="EEPROM" typeRef="Self_Test_Type"/> <xtce:Member name="Flash" typeRef="Self_Test_Type"/> <xtce:Member name="Modem" typeRef="Self_Test_Type"/> </xtce:MemberList> </xtce:AggregateParameterType> <xtce:BinaryParameterType name="Unused_2bits_Type" initialValue="00" shortDescription="Empty Space In Structure"> <xtce:UnitSet/> <xtce:BinaryDataEncoding> <xtce:SizeInBits> <xtce:FixedValue>2</xtce:FixedValue> </xtce:SizeInBits> </xtce:BinaryDataEncoding> </xtce:BinaryParameterType> <xtce:EnumeratedParameterType initialValue="ENABLED" name="Self_Test_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="1"/> <xtce:EnumerationList> <xtce:Enumeration value="0" label="DISABLED" shortDescription="Built-In Self Test not to execute on boot"/> <xtce:Enumeration value="1" label="ENABLED" shortDescription="Built-In Self Test execute on boot"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:EnumeratedParameterType initialValue="PRIMARY" name="Config_Clock_ID_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="signMagnitude" sizeInBits="8"/> <xtce:EnumerationList> <xtce:Enumeration shortDescription="Do Not Synchronize" value="-1" label="NOSYNC"/> <xtce:Enumeration shortDescription="Use primary oscillator" value="0" label="PRIMARY"/> <xtce:Enumeration shortDescription="Use secondary oscillator" value="1" label="SECONDARY"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:FloatParameterType initialValue="-0.6" name="Power_Level_Type"> <xtce:LongDescription>This demonstrates using a ContextCalibrator so that the engineering conversion is different for each of the two processors.</xtce:LongDescription> <xtce:UnitSet> <xtce:Unit>dB</xtce:Unit> </xtce:UnitSet> <xtce:IntegerDataEncoding encoding="twosComplement" sizeInBits="16"> <xtce:DefaultCalibrator name="Default_Counts" shortDescription="This calibrator is used for PROCESSOR3"> <xtce:PolynomialCalibrator> <xtce:Term coefficient="1.5" exponent="0"/> <xtce:Term coefficient="1" exponent="1"/> </xtce:PolynomialCalibrator> </xtce:DefaultCalibrator> <xtce:ContextCalibratorList> <xtce:ContextCalibrator> <xtce:ContextMatch> <xtce:Comparison parameterRef="Table_Processor_ID" value="PROCESSOR1"/> </xtce:ContextMatch> <xtce:Calibrator> <xtce:PolynomialCalibrator> <xtce:Term coefficient="-0.2" exponent="0"/> <xtce:Term coefficient="1" exponent="1"/> </xtce:PolynomialCalibrator> </xtce:Calibrator> </xtce:ContextCalibrator> <xtce:ContextCalibrator> <xtce:ContextMatch> <xtce:Comparison parameterRef="Table_Processor_ID" value="PROCESSOR2"/> </xtce:ContextMatch> <xtce:Calibrator> <xtce:PolynomialCalibrator> <xtce:Term coefficient="-1.0" exponent="0"/> <xtce:Term coefficient="1" exponent="1"/> </xtce:PolynomialCalibrator> </xtce:Calibrator> </xtce:ContextCalibrator> </xtce:ContextCalibratorList> </xtce:IntegerDataEncoding> <xtce:ValidRange validRangeAppliesToCalibrated="true" minInclusive="-10.0" maxInclusive="10.0"/> </xtce:FloatParameterType> <xtce:EnumeratedParameterType name="Payload_Interface_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="4"/> <xtce:EnumerationList> <xtce:Enumeration value="1" label="LINK1"/> <xtce:Enumeration value="2" label="LINK2"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:EnumeratedParameterType name="Payload_Performance_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="4"/> <xtce:EnumerationList> <xtce:Enumeration value="0" label="OFF"/> <xtce:Enumeration value="1" label="LEGACY"/> <xtce:Enumeration value="2" label="NORMAL"/> <xtce:Enumeration value="3" label="ENHANCED"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> </xtce:ParameterTypeSet> <xtce:ParameterSet> <xtce:Parameter name="Table_Processor_ID" initialValue="NOT_YET_SET" parameterTypeRef="Table_Processor_ID_Type" shortDescription="Identifier for the onboard processor associated with the configuration table"> <xtce:ParameterProperties dataSource="telemetered" readOnly="false"/> </xtce:Parameter> <xtce:Parameter name="Table_CRC_Value" parameterTypeRef="Table_CRC_Value_Type" shortDescription="CRC value of the configuration table for data assurance"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter parameterTypeRef="Config_Log_Levels_Type" name="Config_Log_Levels"> <xtce:AliasSet> <xtce:Alias nameSpace="FSW" alias="cfg_loglevel"/> </xtce:AliasSet> <xtce:AncillaryDataSet> <xtce:AncillaryData name="InControl">timeout=undef</xtce:AncillaryData> <xtce:AncillaryData name="InControl">retain="yes"</xtce:AncillaryData> <xtce:AncillaryData name="OS/Comet">PERSIST</xtce:AncillaryData> <xtce:AncillaryData name="Effectivity">Immediate</xtce:AncillaryData> </xtce:AncillaryDataSet> <xtce:ParameterProperties dataSource="telemetered" readOnly="false"/> </xtce:Parameter> <xtce:Parameter parameterTypeRef="Config_Watchdog_Type" name="Config_Watchdog"> <xtce:AliasSet> <xtce:Alias nameSpace="FSW" alias="cfg_wdt_seconds"/> </xtce:AliasSet> <xtce:AncillaryDataSet> <xtce:AncillaryData name="InControl">timeout=undef</xtce:AncillaryData> <xtce:AncillaryData name="InControl">retain="yes"</xtce:AncillaryData> <xtce:AncillaryData name="OS/Comet">PERSIST</xtce:AncillaryData> <xtce:AncillaryData name="Effectivity">Reset</xtce:AncillaryData> </xtce:AncillaryDataSet> <xtce:ParameterProperties dataSource="telemetered" readOnly="false"/> </xtce:Parameter> <xtce:Parameter parameterTypeRef="Config_PROM_Access_Type" name="Config_PROM_Access"> <xtce:AliasSet> <xtce:Alias nameSpace="FSW" alias="cfg_prom_delay_us"/> </xtce:AliasSet> <xtce:AncillaryDataSet> <xtce:AncillaryData name="InControl">timeout=undef</xtce:AncillaryData> <xtce:AncillaryData name="InControl">retain="yes"</xtce:AncillaryData> <xtce:AncillaryData name="OS/Comet">PERSIST</xtce:AncillaryData> <xtce:AncillaryData name="Effectivity">Immediate</xtce:AncillaryData> </xtce:AncillaryDataSet> <xtce:ParameterProperties dataSource="telemetered" readOnly="false"/> </xtce:Parameter> <xtce:Parameter parameterTypeRef="Config_Self_Tests_Type" name="Config_Self_Test" shortDescription="Built-In Self Test Processor Restart Configuration Flags"> <xtce:AliasSet> <xtce:Alias nameSpace="FSW" alias="cfg_bist"/> </xtce:AliasSet> <xtce:AncillaryDataSet> <xtce:AncillaryData name="InControl">timeout=undef</xtce:AncillaryData> <xtce:AncillaryData name="InControl">retain="yes"</xtce:AncillaryData> <xtce:AncillaryData name="OS/Comet">PERSIST</xtce:AncillaryData> <xtce:AncillaryData name="Effectivity">Reset</xtce:AncillaryData> </xtce:AncillaryDataSet> <xtce:ParameterProperties dataSource="telemetered" readOnly="false"/> </xtce:Parameter> <xtce:Parameter parameterTypeRef="Config_Clock_ID_Type" name="Config_Clock_ID" shortDescription="Onboard Clock to Synchronize with on Reset"> <xtce:AliasSet> <xtce:Alias nameSpace="FSW" alias="cfg_primary_clock"/> </xtce:AliasSet> <xtce:AncillaryDataSet> <xtce:AncillaryData name="InControl">timeout=undef</xtce:AncillaryData> <xtce:AncillaryData name="InControl">retain="yes"</xtce:AncillaryData> <xtce:AncillaryData name="OS/Comet">PERSIST</xtce:AncillaryData> <xtce:AncillaryData name="Effectivity">Reset</xtce:AncillaryData> </xtce:AncillaryDataSet> <xtce:ParameterProperties dataSource="telemetered" readOnly="false"/> </xtce:Parameter> <xtce:Parameter parameterTypeRef="Power_Level_Type" name="Config_Ant_Power_Level" shortDescription="Default transmit power level setting"> <xtce:LongDescription>The power level setting is calibrated differently for the three on-board processors. This is due to a slight hardware difference between the 1, 2, and 3 units.</xtce:LongDescription> <xtce:AliasSet> <xtce:Alias nameSpace="FSW" alias="cfg_ant_power_counts"/> </xtce:AliasSet> <xtce:AncillaryDataSet> <xtce:AncillaryData name="InControl">timeout=undef</xtce:AncillaryData> <xtce:AncillaryData name="InControl">retain="yes"</xtce:AncillaryData> <xtce:AncillaryData name="OS/Comet">PERSIST</xtce:AncillaryData> <xtce:AncillaryData name="Effectivity">Delayed</xtce:AncillaryData> </xtce:AncillaryDataSet> <xtce:ParameterProperties dataSource="telemetered" readOnly="false"/> </xtce:Parameter> <xtce:Parameter parameterTypeRef="Payload_Interface_Type" name="Config_Payload_IF_ID" initialValue="LINK1" shortDescription="The payload interface ID to use"> <xtce:LongDescription>The payload interface is only available to processor 1. The backup processor cannot do payload functions.</xtce:LongDescription> <xtce:AliasSet> <xtce:Alias nameSpace="FSW" alias="cfg_pl_interface_link"/> </xtce:AliasSet> <xtce:AncillaryDataSet> <xtce:AncillaryData name="InControl">timeout=undef</xtce:AncillaryData> <xtce:AncillaryData name="InControl">retain="yes"</xtce:AncillaryData> <xtce:AncillaryData name="OS/Comet">PERSIST</xtce:AncillaryData> <xtce:AncillaryData name="Effectivity">Reset</xtce:AncillaryData> </xtce:AncillaryDataSet> <xtce:ParameterProperties dataSource="telemetered" readOnly="false"/> </xtce:Parameter> <xtce:Parameter parameterTypeRef="Payload_Performance_Type" name="Config_Payload_Perf" initialValue="NORMAL" shortDescription="The payload performance mode to use"> <xtce:LongDescription>The payload interface is only available to processor 1. The backup processor cannot do payload functions.</xtce:LongDescription> <xtce:AliasSet> <xtce:Alias nameSpace="FSW" alias="cfg_pl_mode"/> </xtce:AliasSet> <xtce:AncillaryDataSet> <xtce:AncillaryData name="InControl">timeout=undef</xtce:AncillaryData> <xtce:AncillaryData name="InControl">retain="yes"</xtce:AncillaryData> <xtce:AncillaryData name="OS/Comet">PERSIST</xtce:AncillaryData> <xtce:AncillaryData name="Effectivity">Reset</xtce:AncillaryData> </xtce:AncillaryDataSet> <xtce:ParameterProperties dataSource="telemetered" readOnly="false"/> </xtce:Parameter> </xtce:ParameterSet> <xtce:ContainerSet> <xtce:SequenceContainer name="Processor_Config_Table" abstract="true" shortDescription="This is the onboard processor configuration table container layout for encoding and decoding parameters"> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="Table_Processor_ID"/> <xtce:ParameterRefEntry parameterRef="Config_Log_Levels"/> <xtce:ParameterRefEntry parameterRef="Config_Watchdog"> <xtce:LocationInContainerInBits> <xtce:FixedValue>8</xtce:FixedValue> </xtce:LocationInContainerInBits> </xtce:ParameterRefEntry> <xtce:ParameterRefEntry parameterRef="Config_PROM_Access"/> <xtce:ParameterRefEntry parameterRef="Config_Self_Test"/> <xtce:ParameterRefEntry parameterRef="Config_Clock_ID"/> <xtce:ParameterRefEntry parameterRef="Config_Ant_Power_Level"/> <xtce:ParameterRefEntry parameterRef="Table_CRC_Value"> <xtce:LocationInContainerInBits referenceLocation="containerEnd"> <xtce:FixedValue>0</xtce:FixedValue> </xtce:LocationInContainerInBits> </xtce:ParameterRefEntry> </xtce:EntryList> </xtce:SequenceContainer> <xtce:SequenceContainer name="Processor_1_Config_Table" shortDescription="This is the onboard processor 1 specific configuration table container layout for encoding and decoding parameters"> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="Config_Payload_IF_ID"/> <xtce:ParameterRefEntry parameterRef="Config_Payload_Perf"/> </xtce:EntryList> <xtce:BaseContainer containerRef="Processor_Config_Table"> <xtce:RestrictionCriteria> <xtce:Comparison parameterRef="Table_Processor_ID" value="PROCESSOR1"/> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer name="Processor_2_Config_Table" shortDescription="This is the onboard processor 2 specific configuration table container layout for encoding and decoding parameters"> <xtce:EntryList/> <xtce:BaseContainer containerRef="Processor_Config_Table"> <xtce:RestrictionCriteria> <xtce:Comparison parameterRef="Table_Processor_ID" value="PROCESSOR2"/> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer name="Processor_3_Config_Table" shortDescription="This is the onboard processor 3 specific configuration table container layout for encoding and decoding parameters"> <xtce:EntryList> <xtce:ContainerRefEntry containerRef="Dummy_24bit_Container"/> <xtce:ParameterRefEntry parameterRef="Config_Payload_IF_ID"/> <xtce:ParameterRefEntry parameterRef="Config_Payload_Perf"/> </xtce:EntryList> <xtce:BaseContainer containerRef="Processor_Config_Table"> <xtce:RestrictionCriteria> <xtce:Comparison parameterRef="Table_Processor_ID" value="PROCESSOR3"/> </xtce:RestrictionCriteria> </xtce:BaseContainer> </xtce:SequenceContainer> <xtce:SequenceContainer name="Dummy_24bit_Container" shortDescription="This container has no content"> <xtce:LongDescription>This is NOT a recommended practice. This container exists to verify in the unit tests that this will work, albeit not the best idea. There might be some corner cases in a database design where something like this is actually needed, so it is supported as a possibility.</xtce:LongDescription> <xtce:BinaryEncoding> <xtce:SizeInBits> <xtce:FixedValue>24</xtce:FixedValue> </xtce:SizeInBits> </xtce:BinaryEncoding> <xtce:EntryList/> </xtce:SequenceContainer> </xtce:ContainerSet> <xtce:StreamSet> <xtce:VariableFrameStream name="CFGTABLE" shortDescription="This is the onboard processor configuration table binary file stream"> <xtce:ContainerRef containerRef="Processor_Config_Table"/> <xtce:SyncStrategy> <xtce:Flag/> </xtce:SyncStrategy> </xtce:VariableFrameStream> </xtce:StreamSet> </xtce:TelemetryMetaData> </xtce:SpaceSystem> <xtce:SpaceSystem name="BusElectronics"> <xtce:Header validationStatus="Test" classification="NotClassified" version="Build0" date="27-10-2012"/> <xtce:TelemetryMetaData> <xtce:ParameterTypeSet> <xtce:StringParameterType name="Bus_Fault_Message_Type" shortDescription="Bus Error Message"> <xtce:UnitSet/> <xtce:StringDataEncoding bitOrder="mostSignificantBitFirst" encoding="UTF-8"> <xtce:SizeInBits> <xtce:Fixed> <xtce:FixedValue>128</xtce:FixedValue> </xtce:Fixed> </xtce:SizeInBits> </xtce:StringDataEncoding> </xtce:StringParameterType> <xtce:BooleanParameterType name="Battery_Charge_Mode_Type" zeroStringValue="DISCHARGE" oneStringValue="CHARGE" shortDescription="This parameter indicates whether the charger is charging the battery"> <xtce:UnitSet/> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" encoding="unsigned" sizeInBits="1" changeThreshold="1"/> </xtce:BooleanParameterType> <xtce:BooleanParameterType name="boolean_float32_Type" zeroStringValue="FALSE" oneStringValue="TRUE" shortDescription="Generic boolean EU type with float32 data encoding"> <xtce:UnitSet/> <xtce:FloatDataEncoding bitOrder="mostSignificantBitFirst" encoding="IEEE754_1985" sizeInBits="32" changeThreshold="1"/> </xtce:BooleanParameterType> <xtce:BooleanParameterType name="boolean_float64_Type" zeroStringValue="FALSE" oneStringValue="TRUE" shortDescription="Generic boolean EU type with float64 data encoding"> <xtce:UnitSet/> <xtce:FloatDataEncoding bitOrder="mostSignificantBitFirst" encoding="IEEE754_1985" sizeInBits="64" changeThreshold="1"/> </xtce:BooleanParameterType> <xtce:BooleanParameterType name="boolean_binary_Type" zeroStringValue="FALSE" oneStringValue="TRUE" shortDescription="Generic boolean EU type with binary data encoding"> <xtce:UnitSet/> <xtce:BinaryDataEncoding> <xtce:SizeInBits> <xtce:FixedValue>4</xtce:FixedValue> </xtce:SizeInBits> </xtce:BinaryDataEncoding> </xtce:BooleanParameterType> <xtce:BooleanParameterType name="boolean_string_Type" zeroStringValue="FALSE" oneStringValue="TRUE" shortDescription="Generic boolean EU type with string data encoding"> <xtce:UnitSet/> <xtce:StringDataEncoding encoding="UTF-8"> <xtce:SizeInBits> <xtce:Fixed> <xtce:FixedValue>32</xtce:FixedValue> </xtce:Fixed> </xtce:SizeInBits> </xtce:StringDataEncoding> </xtce:BooleanParameterType> <xtce:FloatParameterType name="Battery_Voltage_Type" sizeInBits="32" shortDescription="This parameter describes the measured battery voltage"> <xtce:LongDescription>The battery on BogusSAT is a modeled by a typical flooded lead acid car battery.</xtce:LongDescription> <xtce:UnitSet> <xtce:Unit description="Potential">Volts</xtce:Unit> </xtce:UnitSet> <xtce:FloatDataEncoding bitOrder="mostSignificantBitFirst" encoding="IEEE754_1985" sizeInBits="32" changeThreshold="0.01"/> <xtce:ValidRange minInclusive="0.0" maxInclusive="15.0"/> <xtce:DefaultAlarm minViolations="1"> <xtce:StaticAlarmRanges> <xtce:WarningRange minExclusive="12.35" maxExclusive="13.80"/> <xtce:CriticalRange minExclusive="12.10" maxExclusive="14.34"/> </xtce:StaticAlarmRanges> </xtce:DefaultAlarm> <xtce:ContextAlarmList> <xtce:ContextAlarm minViolations="1"> <xtce:StaticAlarmRanges> <xtce:WarningRange minInclusive="12.60" maxInclusive="14.00"/> <xtce:CriticalRange minInclusive="12.35" maxInclusive="14.34"/> </xtce:StaticAlarmRanges> <xtce:ContextMatch> <xtce:Comparison parameterRef="Battery_Charge_Mode" value="CHARGE"/> </xtce:ContextMatch> </xtce:ContextAlarm> <xtce:ContextAlarm minViolations="1"> <xtce:StaticAlarmRanges> <xtce:WarningRange minInclusive="12.35" maxInclusive="12.60"/> <xtce:CriticalRange minInclusive="12.10" maxInclusive="13.00"/> </xtce:StaticAlarmRanges> <xtce:ContextMatch> <xtce:Comparison parameterRef="Battery_Charge_Mode" value="DISCHARGE"/> </xtce:ContextMatch> </xtce:ContextAlarm> </xtce:ContextAlarmList> </xtce:FloatParameterType> <xtce:FloatParameterType name="Battery_Current_Type" sizeInBits="32" shortDescription="This parameter describes the measured current draw"> <xtce:LongDescription>The battery on BogusSAT is a modeled by a typical flooded lead acid car battery.</xtce:LongDescription> <xtce:UnitSet> <xtce:Unit description="Current">Amperes</xtce:Unit> </xtce:UnitSet> <xtce:FloatDataEncoding bitOrder="mostSignificantBitFirst" encoding="IEEE754_1985" sizeInBits="32" changeThreshold="0.01"/> <xtce:ValidRange minInclusive="-100.0" maxInclusive="100.0"/> <xtce:DefaultAlarm minViolations="1"> <xtce:StaticAlarmRanges> <xtce:WarningRange minExclusive="-5.0" maxExclusive="10.0"/> <xtce:CriticalRange minExclusive="-20.0" maxExclusive="15.0"/> </xtce:StaticAlarmRanges> </xtce:DefaultAlarm> </xtce:FloatParameterType> <xtce:FloatParameterType name="Battery_State_Of_Charge_Type" sizeInBits="32" shortDescription="Calculated battery state of charge"> <xtce:UnitSet> <xtce:Unit>Percent</xtce:Unit> </xtce:UnitSet> <xtce:ValidRange minInclusive="0.0" maxInclusive="100.0"/> </xtce:FloatParameterType> <xtce:FloatParameterType name="Solar_Array_Voltage_Type" sizeInBits="32" shortDescription="This parameter describes the measured solar array output voltage at the charger"> <xtce:LongDescription>The solar array on BogusSAT is 10 230W Trina TSM-DA05 monocrystalline panels, wired in series.</xtce:LongDescription> <xtce:UnitSet> <xtce:Unit description="Potential">Volts</xtce:Unit> </xtce:UnitSet> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" encoding="unsigned" sizeInBits="12" changeThreshold="1"> <xtce:DefaultCalibrator> <xtce:PolynomialCalibrator> <xtce:Term exponent="0" coefficient="-100.0"/> <xtce:Term exponent="1" coefficient="0.1"/> </xtce:PolynomialCalibrator> </xtce:DefaultCalibrator> </xtce:IntegerDataEncoding> <xtce:ValidRange minInclusive="0.00" maxInclusive="4000.00"/> <xtce:DefaultAlarm minViolations="2"> <xtce:StaticAlarmRanges> <xtce:CriticalRange minInclusive="0.0" maxInclusive="370.0"/> </xtce:StaticAlarmRanges> </xtce:DefaultAlarm> </xtce:FloatParameterType> <xtce:FloatParameterType name="Quadratic_Demo_Type" sizeInBits="64" shortDescription="This is an analog parameter with a simple quadratic encoding"> <xtce:UnitSet/> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" encoding="unsigned" sizeInBits="16" changeThreshold="1"> <xtce:DefaultCalibrator shortDescription="this is y = x^2 + 2x - 8"> <xtce:PolynomialCalibrator> <xtce:Term exponent="0" coefficient="-8"/> <xtce:Term exponent="1" coefficient="2"/> <xtce:Term exponent="2" coefficient="1"/> </xtce:PolynomialCalibrator> </xtce:DefaultCalibrator> </xtce:IntegerDataEncoding> <xtce:ValidRange minInclusive="0.00" maxInclusive="4000.00" validRangeAppliesToCalibrated="true"/> <xtce:DefaultAlarm minViolations="1"> <xtce:StaticAlarmRanges> <xtce:CriticalRange minInclusive="-100.0" maxInclusive="100.0"/> </xtce:StaticAlarmRanges> </xtce:DefaultAlarm> </xtce:FloatParameterType> <xtce:FloatParameterType name="Quadratic_Demo_SingleRoot_Type" sizeInBits="32" shortDescription="This is a float parameter with a float quadratic encoding"> <xtce:UnitSet/> <xtce:FloatDataEncoding bitOrder="mostSignificantBitFirst" encoding="IEEE754_1985" sizeInBits="32"> <xtce:DefaultCalibrator shortDescription="this is y = x^2 + 1"> <xtce:PolynomialCalibrator> <xtce:Term exponent="0" coefficient="1"/> <xtce:Term exponent="2" coefficient="1"/> </xtce:PolynomialCalibrator> </xtce:DefaultCalibrator> </xtce:FloatDataEncoding> <xtce:ValidRange minInclusive="-10.00" maxInclusive="10.00" validRangeAppliesToCalibrated="false"/> </xtce:FloatParameterType> <xtce:FloatParameterType name="Quadratic_Demo_SingleRoot2_Type" sizeInBits="32" shortDescription="This is a float parameter with a float quadratic encoding"> <xtce:UnitSet/> <xtce:FloatDataEncoding bitOrder="mostSignificantBitFirst" encoding="IEEE754_1985" sizeInBits="32"> <xtce:DefaultCalibrator shortDescription="this is y = x^2 - 4x + 4"> <xtce:PolynomialCalibrator> <xtce:Term exponent="0" coefficient="4.0"/> <xtce:Term exponent="1" coefficient="-4.0"/> <xtce:Term exponent="2" coefficient="1"/> </xtce:PolynomialCalibrator> </xtce:DefaultCalibrator> </xtce:FloatDataEncoding> <xtce:ValidRange minExclusive="-32.0" maxExclusive="32.0"/> </xtce:FloatParameterType> <xtce:FloatParameterType name="Spline_Demo_Type" sizeInBits="64" shortDescription="This is a float parameter with a float spline encoding"> <xtce:UnitSet/> <xtce:FloatDataEncoding bitOrder="mostSignificantBitFirst" encoding="IEEE754_1985" sizeInBits="64"> <xtce:DefaultCalibrator> <xtce:SplineCalibrator order="1" extrapolate="false"> <xtce:SplinePoint raw="-6.0" calibrated="1.0"/> <xtce:SplinePoint raw="-3.0" calibrated="2.0"/> <xtce:SplinePoint raw="-1.0" calibrated="3.0"/> <xtce:SplinePoint raw="1.0" calibrated="3.0"/> <xtce:SplinePoint raw="3.0" calibrated="2.0"/> <xtce:SplinePoint raw="6.0" calibrated="1.0"/> </xtce:SplineCalibrator> </xtce:DefaultCalibrator> </xtce:FloatDataEncoding> </xtce:FloatParameterType> <xtce:BooleanParameterType name="Solar_Array_Voltage_State_Type" initialValue="OFF" zeroStringValue="OFF" oneStringValue="ON" shortDescription="The operational state of the solar array voltage sensor"> <xtce:UnitSet/> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" encoding="unsigned" sizeInBits="8" changeThreshold="1"/> </xtce:BooleanParameterType> <xtce:FloatParameterType sizeInBits="64" name="SunSensorPolyCalType"> <xtce:UnitSet> <xtce:Unit>cd/m^2</xtce:Unit> </xtce:UnitSet> <xtce:IntegerDataEncoding sizeInBits="16" encoding="twosComplement"> <xtce:DefaultCalibrator> <xtce:PolynomialCalibrator> <xtce:Term exponent="0" coefficient="-10.0"/> <xtce:Term exponent="1" coefficient="5.0"/> </xtce:PolynomialCalibrator> </xtce:DefaultCalibrator> <xtce:ContextCalibratorList> <xtce:ContextCalibrator> <xtce:ContextMatch> <xtce:Comparison value="LOW" parameterRef="/BogusSAT/SC001/BusElectronics/SunSensorMode"/> </xtce:ContextMatch> <xtce:Calibrator> <xtce:PolynomialCalibrator> <xtce:Term exponent="0" coefficient="0.0"/> <xtce:Term exponent="1" coefficient="5.0"/> </xtce:PolynomialCalibrator> </xtce:Calibrator> </xtce:ContextCalibrator> <xtce:ContextCalibrator> <xtce:ContextMatch> <xtce:Comparison value="HIGH" parameterRef="SunSensorMode"/> </xtce:ContextMatch> <xtce:Calibrator> <xtce:PolynomialCalibrator> <xtce:Term exponent="0" coefficient="0.0"/> <xtce:Term exponent="1" coefficient="15.0"/> </xtce:PolynomialCalibrator> </xtce:Calibrator> </xtce:ContextCalibrator> </xtce:ContextCalibratorList> </xtce:IntegerDataEncoding> </xtce:FloatParameterType> <xtce:FloatParameterType sizeInBits="64" name="EarthSensorSplineCalType"> <xtce:UnitSet> <xtce:Unit>cd/m^2</xtce:Unit> </xtce:UnitSet> <xtce:IntegerDataEncoding sizeInBits="16" encoding="twosComplement"> <xtce:DefaultCalibrator> <xtce:SplineCalibrator order="1"> <xtce:SplinePoint raw="0" calibrated="0.0"/> <xtce:SplinePoint raw="10" calibrated="5.0"/> <xtce:SplinePoint raw="20" calibrated="10.0"/> </xtce:SplineCalibrator> </xtce:DefaultCalibrator> <xtce:ContextCalibratorList> <xtce:ContextCalibrator> <xtce:ContextMatch> <xtce:Comparison value="LOW" parameterRef="EarthSensorMode"/> </xtce:ContextMatch> <xtce:Calibrator> <xtce:SplineCalibrator order="1"> <xtce:SplinePoint raw="0" calibrated="5.0"/> <xtce:SplinePoint raw="10" calibrated="10.0"/> <xtce:SplinePoint raw="20" calibrated="15.0"/> </xtce:SplineCalibrator> </xtce:Calibrator> </xtce:ContextCalibrator> <xtce:ContextCalibrator> <xtce:ContextMatch> <xtce:Comparison value="HIGH" parameterRef="/BogusSAT/SC001/BusElectronics/EarthSensorMode"/> </xtce:ContextMatch> <xtce:Calibrator> <xtce:SplineCalibrator order="0"> <xtce:SplinePoint raw="0" calibrated="10.0"/> <xtce:SplinePoint raw="10" calibrated="15.0"/> <xtce:SplinePoint raw="20" calibrated="20.0"/> </xtce:SplineCalibrator> </xtce:Calibrator> </xtce:ContextCalibrator> </xtce:ContextCalibratorList> </xtce:IntegerDataEncoding> </xtce:FloatParameterType> <xtce:EnumeratedParameterType name="SunSensorModeType" initialValue="OFF"> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="8" encoding="unsigned"/> <xtce:EnumerationList> <xtce:Enumeration label="OFF" value="0"/> <xtce:Enumeration label="LOW" value="1"/> <xtce:Enumeration label="HIGH" value="2"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:FloatParameterType name="Float_MathOpCal_1_Type" sizeInBits="32" shortDescription="This is a float parameter with a simple math operation calibrator"> <xtce:UnitSet/> <xtce:FloatDataEncoding bitOrder="mostSignificantBitFirst" encoding="IEEE754_1985" sizeInBits="32"> <xtce:DefaultCalibrator> <xtce:MathOperationCalibrator> <xtce:ValueOperand>0.5</xtce:ValueOperand> <xtce:ThisParameterOperand/> <xtce:Operator>*</xtce:Operator> <xtce:ValueOperand>1.25</xtce:ValueOperand> <xtce:Operator>+</xtce:Operator> </xtce:MathOperationCalibrator> </xtce:DefaultCalibrator> </xtce:FloatDataEncoding> </xtce:FloatParameterType> <xtce:FloatParameterType name="Float_MathOpCal_2_Type" sizeInBits="64" shortDescription="This is a float parameter with a longer math operation calibrator"> <xtce:UnitSet/> <xtce:FloatDataEncoding bitOrder="mostSignificantBitFirst" encoding="IEEE754_1985" sizeInBits="64"> <xtce:DefaultCalibrator> <xtce:MathOperationCalibrator> <!-- Equation in "infix" notation: 64 * log(2)[1.234 * value] also is 64 * (ln[1.234 * value] / ln[2]) --> <xtce:ValueOperand>1.234</xtce:ValueOperand> <xtce:ThisParameterOperand/> <xtce:Operator>*</xtce:Operator> <xtce:Operator>ln</xtce:Operator> <xtce:ValueOperand>2.0</xtce:ValueOperand> <xtce:Operator>ln</xtce:Operator> <xtce:Operator>/</xtce:Operator> <xtce:ValueOperand>64.0</xtce:ValueOperand> <xtce:Operator>*</xtce:Operator> </xtce:MathOperationCalibrator> </xtce:DefaultCalibrator> </xtce:FloatDataEncoding> </xtce:FloatParameterType> <xtce:FloatParameterType name="Float_MathOpCal_3_Type" sizeInBits="64"> <xtce:UnitSet/> <xtce:FloatDataEncoding bitOrder="mostSignificantBitFirst" encoding="IEEE754_1985" sizeInBits="64"> <xtce:DefaultCalibrator> <xtce:MathOperationCalibrator> <!-- Equation in "infix" notation: 1 / ( -0.2054 ln(x)^3 + 0.08678 ln(x)^2 - 0.01209 ln(x) + 0.0005638 ) - 273.15 --> <xtce:ValueOperand>-0.2054</xtce:ValueOperand> <xtce:ThisParameterOperand/> <xtce:Operator>ln</xtce:Operator> <xtce:ValueOperand>3.0</xtce:ValueOperand> <xtce:Operator>^</xtce:Operator> <xtce:Operator>*</xtce:Operator> <xtce:ValueOperand>0.08678</xtce:ValueOperand> <xtce:ThisParameterOperand/> <xtce:Operator>ln</xtce:Operator> <xtce:ValueOperand>2.0</xtce:ValueOperand> <xtce:Operator>^</xtce:Operator> <xtce:Operator>*</xtce:Operator> <xtce:Operator>+</xtce:Operator> <xtce:ValueOperand>0.01209</xtce:ValueOperand> <xtce:ThisParameterOperand/> <xtce:Operator>ln</xtce:Operator> <xtce:Operator>*</xtce:Operator> <xtce:Operator>-</xtce:Operator> <xtce:ValueOperand>0.0005638</xtce:ValueOperand> <xtce:Operator>+</xtce:Operator> <xtce:ValueOperand>1.0</xtce:ValueOperand> <xtce:Operator>/</xtce:Operator> <xtce:ValueOperand>273.15</xtce:ValueOperand> <xtce:Operator>-</xtce:Operator> </xtce:MathOperationCalibrator> </xtce:DefaultCalibrator> </xtce:FloatDataEncoding> </xtce:FloatParameterType> </xtce:ParameterTypeSet> <xtce:ParameterSet> <xtce:Parameter name="Battery_Charge_Mode" parameterTypeRef="Battery_Charge_Mode_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>EPS</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="boolean_float32" parameterTypeRef="boolean_float32_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>EPS</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="boolean_float64" parameterTypeRef="boolean_float64_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>EPS</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="boolean_binary" parameterTypeRef="boolean_binary_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>EPS</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="boolean_string" parameterTypeRef="boolean_string_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>EPS</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Battery_Voltage" parameterTypeRef="Battery_Voltage_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>EPS</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Battery_Current" parameterTypeRef="Battery_Current_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>EPS</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Battery_State_Of_Charge" parameterTypeRef="Battery_State_Of_Charge_Type"> <xtce:ParameterProperties dataSource="derived" readOnly="true"> <xtce:SystemName>EPS</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Solar_Array_Voltage_1_State" parameterTypeRef="Solar_Array_Voltage_State_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>EPS</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Solar_Array_Voltage_2_State" parameterTypeRef="Solar_Array_Voltage_State_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>EPS</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Quadratic_Demo" parameterTypeRef="Quadratic_Demo_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>NONE</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Quadratic_Demo_SingleRoot" parameterTypeRef="Quadratic_Demo_SingleRoot_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>NONE</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Quadratic_Demo_SingleRoot2" parameterTypeRef="Quadratic_Demo_SingleRoot2_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>NONE</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Spline_Demo" parameterTypeRef="Spline_Demo_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>NONE</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Solar_Array_Voltage_1" parameterTypeRef="Solar_Array_Voltage_Type"> <xtce:AliasSet> <xtce:Alias nameSpace="ID" alias="100345"/> <xtce:Alias nameSpace="FOO" alias="Hello"/> </xtce:AliasSet> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>EPS</xtce:SystemName> <xtce:ValidityCondition> <xtce:Comparison parameterRef="Solar_Array_Voltage_1_State" value="ON"/> </xtce:ValidityCondition> <xtce:PhysicalAddressSet> <xtce:PhysicalAddress sourceAddress="0xb000f100" sourceName="RAM"/> </xtce:PhysicalAddressSet> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Solar_Array_Voltage_2" parameterTypeRef="Solar_Array_Voltage_Type"> <xtce:AliasSet> <xtce:Alias nameSpace="ID" alias="100445"/> <xtce:Alias nameSpace="ID" alias="123456"/> </xtce:AliasSet> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>EPS</xtce:SystemName> <xtce:ValidityCondition> <xtce:Comparison parameterRef="Solar_Array_Voltage_2_State" value="ON"/> </xtce:ValidityCondition> <xtce:PhysicalAddressSet> <xtce:PhysicalAddress sourceAddress="0xb000f101" sourceName="RAM"/> </xtce:PhysicalAddressSet> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Bus_Fault_Message" parameterTypeRef="Bus_Fault_Message_Type"> <xtce:AliasSet> <xtce:Alias nameSpace="ID" alias="100999"/> </xtce:AliasSet> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> <xtce:PhysicalAddressSet> <xtce:PhysicalAddress sourceAddress="0xb0010000" sourceName="RAM"/> </xtce:PhysicalAddressSet> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Flag_Parameter" parameterTypeRef="/BogusSAT/Generic_8bits_unsigned"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="Optional_Parameter" parameterTypeRef="/BogusSAT/Generic_16bits_unsigned"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="SensorTime" parameterTypeRef="/BogusSAT/POSIXTimeType" shortDescription="Measurement time of the sensor data"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="SunSensorMode" parameterTypeRef="SunSensorModeType" shortDescription="Operational mode of the sun sensor"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="EarthSensorMode" parameterTypeRef="SunSensorModeType" shortDescription="Operational mode of the earth sensor"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="SunSensorLevel" parameterTypeRef="SunSensorPolyCalType" shortDescription="Illumination level measurement of the sun sensor"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="EarthSensorLevel" parameterTypeRef="EarthSensorSplineCalType" shortDescription="Illumination level of the earth sensor"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="Float_MathOpCal_1" parameterTypeRef="Float_MathOpCal_1_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>NONE</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Float_MathOpCal_2" parameterTypeRef="Float_MathOpCal_2_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>NONE</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Float_MathOpCal_3" parameterTypeRef="Float_MathOpCal_3_Type" shortDescription="Ohms to Celcius Calibrator"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>NONE</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> </xtce:ParameterSet> <xtce:ContainerSet> <xtce:SequenceContainer name="SensorHistoryRecord"> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="SensorTime"/> <xtce:ParameterRefEntry parameterRef="SunSensorMode"/> <xtce:ParameterRefEntry parameterRef="EarthSensorMode"/> <xtce:ParameterRefEntry parameterRef="SunSensorLevel"/> <xtce:ParameterRefEntry parameterRef="EarthSensorLevel"/> </xtce:EntryList> </xtce:SequenceContainer> <xtce:SequenceContainer name="SensorHistoryBuffer"> <xtce:EntryList> <xtce:ContainerRefEntry containerRef="SensorHistoryRecord"> <xtce:RepeatEntry> <xtce:Count> <xtce:FixedValue>4</xtce:FixedValue> </xtce:Count> </xtce:RepeatEntry> </xtce:ContainerRefEntry> </xtce:EntryList> </xtce:SequenceContainer> </xtce:ContainerSet> <xtce:AlgorithmSet> <xtce:MathAlgorithm name="ComputeBatterySOC" shortDescription="Compute the battery state of charge"> <xtce:MathOperation outputParameterRef="Battery_State_Of_Charge"> <xtce:ParameterInstanceRefOperand parameterRef="Battery_Voltage"/> <xtce:ValueOperand>11.7</xtce:ValueOperand> <xtce:Operator>-</xtce:Operator> <xtce:ValueOperand>0.9</xtce:ValueOperand> <xtce:Operator>/</xtce:Operator> <xtce:TriggerSet> <xtce:OnParameterUpdateTrigger parameterRef="Battery_Voltage"/> </xtce:TriggerSet> </xtce:MathOperation> </xtce:MathAlgorithm> </xtce:AlgorithmSet> </xtce:TelemetryMetaData> <xtce:CommandMetaData> <xtce:ArgumentTypeSet> <xtce:IntegerArgumentType name="RW_UNIT_ID_Type" shortDescription="ID number of the reaction wheel"> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="8" encoding="unsigned"/> <xtce:ValidRange minInclusive="1" maxInclusive="2"/> </xtce:IntegerArgumentType> <xtce:EnumeratedArgumentType name="RW_PWR_STATE_Type" shortDescription="Flag to indicate if power should be turned on or off"> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="8" encoding="unsigned"/> <xtce:EnumerationList> <xtce:Enumeration value="0" label="OFF"/> <xtce:Enumeration value="1" label="ON"/> </xtce:EnumerationList> </xtce:EnumeratedArgumentType> <xtce:EnumeratedArgumentType name="PHASE_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="8" encoding="unsigned"/> <xtce:EnumerationList> <xtce:Enumeration value="0" label="SAFE"/> <xtce:Enumeration value="1" label="LEOP"/> <xtce:Enumeration value="2" label="ASCENT"/> <xtce:Enumeration value="3" label="MISSION"/> <xtce:Enumeration value="4" label="STORAGE"/> <xtce:Enumeration value="5" label="DEBORBIT"/> </xtce:EnumerationList> </xtce:EnumeratedArgumentType> </xtce:ArgumentTypeSet> <xtce:MetaCommandSet> <xtce:MetaCommand name="Reaction_Wheel_Control" shortDescription="Power on/off reaction wheel"> <xtce:LongDescription>This hardware telecommand directs the hardware to power on or off either of the 2 reaction wheels</xtce:LongDescription> <xtce:AliasSet> <xtce:Alias nameSpace="OPS" alias="RW_PWR"/> </xtce:AliasSet> <xtce:BaseMetaCommand metaCommandRef="../../CCSDSDirectTelecommand"/> <xtce:ArgumentList> <xtce:Argument name="RW_UNIT_ID" argumentTypeRef="RW_UNIT_ID_Type"/> <xtce:Argument name="RW_PWR_STATE" argumentTypeRef="RW_PWR_STATE_Type"/> </xtce:ArgumentList> <xtce:CommandContainer name="Reaction_Wheel_Control_Container"> <xtce:EntryList> <xtce:ArgumentRefEntry argumentRef="RW_UNIT_ID"/> <xtce:ArgumentRefEntry argumentRef="RW_PWR_STATE"/> </xtce:EntryList> <xtce:BaseContainer containerRef="../../CCSDSDirectTelecommand"/> </xtce:CommandContainer> </xtce:MetaCommand> <xtce:MetaCommand name="Reaction_Wheel_1_On" shortDescription="Turn power on for reaction wheel 1"> <xtce:LongDescription>This hardware telecommand is a derived form of 'Reaction_Wheel_Control' that turns ON reaction wheel 1</xtce:LongDescription> <xtce:AliasSet> <xtce:Alias nameSpace="OPS" alias="RW_1_ON"/> </xtce:AliasSet> <xtce:BaseMetaCommand metaCommandRef="Reaction_Wheel_Control"> <xtce:ArgumentAssignmentList> <xtce:ArgumentAssignment argumentName="RW_UNIT_ID" argumentValue="1"/> <xtce:ArgumentAssignment argumentName="RW_PWR_STATE" argumentValue="ON"/> </xtce:ArgumentAssignmentList> </xtce:BaseMetaCommand> <xtce:CommandContainer name="Reaction_Wheel_1_On_Container"> <xtce:EntryList/> <xtce:BaseContainer containerRef="Reaction_Wheel_Control_Container"/> </xtce:CommandContainer> </xtce:MetaCommand> <xtce:MetaCommand name="Reaction_Wheel_1_Off" shortDescription="Turn power off for reaction wheel 1"> <xtce:LongDescription>This hardware telecommand is a derived form of 'Reaction_Wheel_Control' that turns OFF reaction wheel 1</xtce:LongDescription> <xtce:AliasSet> <xtce:Alias nameSpace="OPS" alias="RW_1_OFF"/> </xtce:AliasSet> <xtce:BaseMetaCommand metaCommandRef="Reaction_Wheel_Control"> <xtce:ArgumentAssignmentList> <xtce:ArgumentAssignment argumentName="RW_UNIT_ID" argumentValue="1"/> <xtce:ArgumentAssignment argumentName="RW_PWR_STATE" argumentValue="OFF"/> </xtce:ArgumentAssignmentList> </xtce:BaseMetaCommand> <xtce:CommandContainer name="Reaction_Wheel_1_Off_Container"> <xtce:EntryList/> <xtce:BaseContainer containerRef="Reaction_Wheel_Control_Container"/> </xtce:CommandContainer> </xtce:MetaCommand> <xtce:MetaCommand name="Reaction_Wheel_2_On" shortDescription="Turn power on for reaction wheel 2"> <xtce:LongDescription>This hardware telecommand is a derived form of 'Reaction_Wheel_Control' that turns ON reaction wheel 2</xtce:LongDescription> <xtce:AliasSet> <xtce:Alias nameSpace="OPS" alias="RW_2_ON"/> </xtce:AliasSet> <xtce:BaseMetaCommand metaCommandRef="Reaction_Wheel_Control"> <xtce:ArgumentAssignmentList> <xtce:ArgumentAssignment argumentName="RW_UNIT_ID" argumentValue="2"/> <xtce:ArgumentAssignment argumentName="RW_PWR_STATE" argumentValue="ON"/> </xtce:ArgumentAssignmentList> </xtce:BaseMetaCommand> <xtce:CommandContainer name="Reaction_Wheel_2_On_Container"> <xtce:EntryList/> <xtce:BaseContainer containerRef="Reaction_Wheel_Control_Container"/> </xtce:CommandContainer> </xtce:MetaCommand> <xtce:MetaCommand name="Reaction_Wheel_2_Off" shortDescription="Turn power off for reaction wheel 2"> <xtce:LongDescription>This hardware telecommand is a derived form of 'Reaction_Wheel_Control' that turns OFF reaction wheel 2</xtce:LongDescription> <xtce:AliasSet> <xtce:Alias nameSpace="OPS" alias="RW_2_OFF"/> </xtce:AliasSet> <xtce:BaseMetaCommand metaCommandRef="Reaction_Wheel_Control"> <xtce:ArgumentAssignmentList> <xtce:ArgumentAssignment argumentName="RW_UNIT_ID" argumentValue="2"/> <xtce:ArgumentAssignment argumentName="RW_PWR_STATE" argumentValue="OFF"/> </xtce:ArgumentAssignmentList> </xtce:BaseMetaCommand> <xtce:CommandContainer name="Reaction_Wheel_2_Off_Container"> <xtce:EntryList/> <xtce:BaseContainer containerRef="Reaction_Wheel_Control_Container"/> </xtce:CommandContainer> </xtce:MetaCommand> <xtce:MetaCommand name="Set_Mission_Phase" shortDescription="Set the bus electronics mission phase"> <xtce:BaseMetaCommand metaCommandRef="/BogusSAT/CCSDSPUSTelecommand"/> <xtce:ArgumentList> <xtce:Argument name="PHASE" argumentTypeRef="PHASE_Type" shortDescription="Mission Operational Mode"/> </xtce:ArgumentList> <xtce:CommandContainer name="Set_Mission_Phase_Container"> <xtce:BaseContainer containerRef="/BogusSAT/CCSDSPUSTelecommand"/> <xtce:EntryList> <xtce:ArgumentRefEntry argumentRef="PHASE"/> </xtce:EntryList> </xtce:CommandContainer> </xtce:MetaCommand> </xtce:MetaCommandSet> </xtce:CommandMetaData> </xtce:SpaceSystem> <xtce:SpaceSystem name="Payload1"> <xtce:LongDescription>This is the primary revenue generating payload software monitor and control data.</xtce:LongDescription> <xtce:Header validationStatus="Working" classification="NotClassified" version="Build2" date="27-10-2012"/> <xtce:TelemetryMetaData> <xtce:ParameterTypeSet> <xtce:IntegerParameterType name="GENERIC_16BIT_UNSIGNED_INT" signed="false" sizeInBits="16" shortDescription="Generic unsigned 16 bit number"> <xtce:UnitSet/> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" encoding="unsigned" sizeInBits="16" changeThreshold="1"/> </xtce:IntegerParameterType> <xtce:StringParameterType name="Payload_Fault_Message_Type" shortDescription="Payload Error Message"> <xtce:UnitSet/> <xtce:StringDataEncoding bitOrder="mostSignificantBitFirst" encoding="UTF-8"> <xtce:SizeInBits> <xtce:TerminationChar>00</xtce:TerminationChar> </xtce:SizeInBits> </xtce:StringDataEncoding> <xtce:SizeRangeInCharacters minInclusive="1" maxInclusive="256"/> </xtce:StringParameterType> <xtce:BinaryParameterType name="Payload_MD5_Type" shortDescription="MD5 Sum of Software Image"> <xtce:UnitSet/> <xtce:BinaryDataEncoding bitOrder="mostSignificantBitFirst"> <xtce:SizeInBits> <xtce:FixedValue>128</xtce:FixedValue> </xtce:SizeInBits> </xtce:BinaryDataEncoding> </xtce:BinaryParameterType> <xtce:BooleanParameterType name="Payload_1_State_Type" zeroStringValue="OFF" oneStringValue="ON" shortDescription="Payload 1 enable state"> <xtce:UnitSet/> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" sizeInBits="4" encoding="unsigned" changeThreshold="1"/> </xtce:BooleanParameterType> <xtce:EnumeratedParameterType name="Payload_1_Phase_Type" shortDescription="Operational Phase of Payload"> <xtce:UnitSet/> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" sizeInBits="4" encoding="unsigned" changeThreshold="1"/> <xtce:EnumerationList> <xtce:Enumeration label="TEST" value="1"/> <xtce:Enumeration label="LAUNCH" value="2"/> <xtce:Enumeration label="STANDBY" value="3"/> <xtce:Enumeration label="ACTIVE" value="4"/> <xtce:Enumeration label="SHUTDOWN" value="5"/> <xtce:Enumeration label="FAILED" value="6" maxValue="16"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:EnumeratedParameterType name="enum_int16_signmag_Type" shortDescription="Generic EU Enumerated type with raw int16 signMagnitude encoding"> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="16" encoding="signMagnitude"/> <xtce:EnumerationList> <xtce:Enumeration label="TEST" value="1"/> <xtce:Enumeration label="LAUNCH" value="2"/> <xtce:Enumeration label="STANDBY" value="3"/> <xtce:Enumeration label="ACTIVE" value="4"/> <xtce:Enumeration label="SHUTDOWN" value="5"/> <xtce:Enumeration label="FAILED" value="6" maxValue="16"/> <xtce:Enumeration label="NEGNUM" value="-2"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:EnumeratedParameterType name="enum_int16_twoscomp_Type" shortDescription="Generic EU Enumerated type with raw int16 twosComplement encoding"> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="16" encoding="twosComplement"/> <xtce:EnumerationList> <xtce:Enumeration label="TEST" value="1"/> <xtce:Enumeration label="LAUNCH" value="2"/> <xtce:Enumeration label="STANDBY" value="3"/> <xtce:Enumeration label="ACTIVE" value="4"/> <xtce:Enumeration label="SHUTDOWN" value="5"/> <xtce:Enumeration label="FAILED" value="6" maxValue="16"/> <xtce:Enumeration label="NEGNUM" value="-2"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:EnumeratedParameterType name="enum_int16_onescomp_Type" shortDescription="Generic EU Enumerated type with raw int16 onesComplement encoding"> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="16" encoding="onesComplement"/> <xtce:EnumerationList> <xtce:Enumeration label="TEST" value="1"/> <xtce:Enumeration label="LAUNCH" value="2"/> <xtce:Enumeration label="STANDBY" value="3"/> <xtce:Enumeration label="ACTIVE" value="4"/> <xtce:Enumeration label="SHUTDOWN" value="5"/> <xtce:Enumeration label="FAILED" value="6" maxValue="16"/> <xtce:Enumeration label="NEGNUM" value="-2"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:EnumeratedParameterType name="enum_binary_Type" shortDescription="Generic EU Enumerated type with raw binary encoding"> <xtce:UnitSet/> <xtce:BinaryDataEncoding> <xtce:SizeInBits> <xtce:FixedValue>32</xtce:FixedValue> </xtce:SizeInBits> </xtce:BinaryDataEncoding> <xtce:EnumerationList> <xtce:Enumeration label="TEST" value="1"/> <xtce:Enumeration label="LAUNCH" value="2"/> <xtce:Enumeration label="STANDBY" value="3"/> <xtce:Enumeration label="ACTIVE" value="4"/> <xtce:Enumeration label="SHUTDOWN" value="5"/> <xtce:Enumeration label="FAILED" value="6" maxValue="16"/> <xtce:Enumeration label="NEGNUM" value="-2"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:EnumeratedParameterType name="enum_float32_Type" shortDescription="Generic EU Enumerated type with raw float32 encoding"> <xtce:UnitSet/> <xtce:FloatDataEncoding sizeInBits="32" encoding="IEEE754_1985"/> <xtce:EnumerationList> <xtce:Enumeration label="TEST" value="1"/> <xtce:Enumeration label="LAUNCH" value="2"/> <xtce:Enumeration label="STANDBY" value="3"/> <xtce:Enumeration label="ACTIVE" value="4"/> <xtce:Enumeration label="SHUTDOWN" value="5"/> <xtce:Enumeration label="FAILED" value="6" maxValue="16"/> <xtce:Enumeration label="NEGNUM" value="-2"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:EnumeratedParameterType name="enum_float64_Type" shortDescription="Generic EU Enumerated type with raw float64 encoding"> <xtce:UnitSet/> <xtce:FloatDataEncoding sizeInBits="64" encoding="IEEE754_1985"/> <xtce:EnumerationList> <xtce:Enumeration label="TEST" value="1"/> <xtce:Enumeration label="LAUNCH" value="2"/> <xtce:Enumeration label="STANDBY" value="3"/> <xtce:Enumeration label="ACTIVE" value="4"/> <xtce:Enumeration label="SHUTDOWN" value="5"/> <xtce:Enumeration label="FAILED" value="6" maxValue="16"/> <xtce:Enumeration label="NEGNUM" value="-2"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:EnumeratedParameterType name="enum_string_Type" shortDescription="Generic EU Enumerated type with raw string encoding"> <xtce:UnitSet/> <xtce:StringDataEncoding> <xtce:SizeInBits> <xtce:Fixed> <xtce:FixedValue>32</xtce:FixedValue> </xtce:Fixed> </xtce:SizeInBits> </xtce:StringDataEncoding> <xtce:EnumerationList> <xtce:Enumeration label="TEST" value="1"/> <xtce:Enumeration label="LAUNCH" value="2"/> <xtce:Enumeration label="STANDBY" value="3"/> <xtce:Enumeration label="ACTIVE" value="4"/> <xtce:Enumeration label="SHUTDOWN" value="5"/> <xtce:Enumeration label="FAILED" value="6" maxValue="16"/> <xtce:Enumeration label="NEGNUM" value="-2"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:EnumeratedParameterType name="Payload_1_Antenna_State_Type" shortDescription="Payload 1 antenna operational state"> <xtce:UnitSet/> <xtce:EnumerationList> <xtce:Enumeration label="OFF" value="0"/> <xtce:Enumeration label="STANDBY" value="1"/> <xtce:Enumeration label="SIGNAL_PRESENT" value="2"/> <xtce:Enumeration label="ACQUIRED" value="3"/> <xtce:Enumeration label="SIGNAL_LOST" value="4"/> <xtce:Enumeration label="FAILED" value="5"/> </xtce:EnumerationList> <xtce:DefaultAlarm minViolations="1"> <xtce:EnumerationAlarmList> <xtce:EnumerationAlarm enumerationLabel="FAILED" alarmLevel="critical"/> </xtce:EnumerationAlarmList> </xtce:DefaultAlarm> <xtce:ContextAlarmList> <xtce:ContextAlarm minViolations="1"> <xtce:EnumerationAlarmList> <xtce:EnumerationAlarm enumerationLabel="SIGNAL_LOST" alarmLevel="warning"/> <xtce:EnumerationAlarm enumerationLabel="OFF" alarmLevel="critical"/> <xtce:EnumerationAlarm enumerationLabel="FAILED" alarmLevel="critical"/> </xtce:EnumerationAlarmList> <xtce:ContextMatch> <xtce:Comparison parameterRef="Payload_1_State" value="ON" comparisonOperator="==" useCalibratedValue="true"/> </xtce:ContextMatch> </xtce:ContextAlarm> </xtce:ContextAlarmList> </xtce:EnumeratedParameterType> <xtce:StringParameterType name="CPU_Fault_Message_Type" shortDescription="CPU Error Message"> <xtce:UnitSet/> <xtce:StringDataEncoding bitOrder="mostSignificantBitFirst" encoding="UTF-16"> <xtce:SizeInBits> <xtce:Fixed> <xtce:FixedValue>64</xtce:FixedValue> </xtce:Fixed> </xtce:SizeInBits> </xtce:StringDataEncoding> </xtce:StringParameterType> <xtce:FloatParameterType name="Basic_Float32_Type" sizeInBits="32" shortDescription="This is an float32 parameter with a simple float32 encoding"> <xtce:UnitSet/> <xtce:FloatDataEncoding bitOrder="mostSignificantBitFirst" encoding="IEEE754_1985" sizeInBits="32" changeThreshold="0.001"/> </xtce:FloatParameterType> <xtce:FloatParameterType name="Basic_Float64_Type" sizeInBits="64" shortDescription="This is an float64 parameter with a simple float64 encoding"> <xtce:UnitSet/> <xtce:FloatDataEncoding bitOrder="mostSignificantBitFirst" encoding="IEEE754_1985" sizeInBits="64" changeThreshold="0.000001"/> <xtce:ValidRange minExclusive="-256.0" maxExclusive="1024.5"/> </xtce:FloatParameterType> <xtce:IntegerParameterType name="Basic_uint32_Type" signed="false" sizeInBits="32" shortDescription="Generic unsigned 32 bit number"> <xtce:UnitSet/> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" encoding="unsigned" sizeInBits="32" changeThreshold="1"/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="Basic_int32_signmag_Type" signed="true" sizeInBits="32" shortDescription="Generic signed 32 bit number with sign magnitude encoding"> <xtce:UnitSet/> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" encoding="signMagnitude" sizeInBits="32" changeThreshold="1"/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="Basic_int32_twoscomp_Type" signed="true" sizeInBits="32" shortDescription="Generic signed 32 bit number with twos complement encoding"> <xtce:UnitSet/> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" encoding="twosComplement" sizeInBits="32" changeThreshold="1"/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="Basic_int32_onescomp_Type" signed="true" sizeInBits="32" shortDescription="Generic signed 32 bit number with ones complement encoding"> <xtce:UnitSet/> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" encoding="onesComplement" sizeInBits="32" changeThreshold="1"/> </xtce:IntegerParameterType> <xtce:StringParameterType name="Basic_string_uint32_Type" shortDescription="Generic string encoded as unsigned 32 bit number"> <xtce:UnitSet/> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" encoding="unsigned" sizeInBits="32"/> </xtce:StringParameterType> <xtce:StringParameterType name="Basic_string_int32_signmag_Type" shortDescription="Generic string encoded as signed 32 bit number with sign magnitude encoding"> <xtce:UnitSet/> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" encoding="signMagnitude" sizeInBits="32"/> </xtce:StringParameterType> <xtce:StringParameterType name="Basic_string_int32_twoscomp_Type" shortDescription="Generic string encoded as signed 32 bit number with twos complement encoding"> <xtce:UnitSet/> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" encoding="twosComplement" sizeInBits="32"/> </xtce:StringParameterType> <xtce:StringParameterType name="Basic_string_int32_onescomp_Type" shortDescription="Generic string encoded as signed 32 bit number with ones complement encoding"> <xtce:UnitSet/> <xtce:IntegerDataEncoding bitOrder="mostSignificantBitFirst" encoding="onesComplement" sizeInBits="32"/> </xtce:StringParameterType> <xtce:StringParameterType name="Basic_string_binary_Type" shortDescription="Generic string encoded as binary octets instead of C style char string encoding"> <xtce:UnitSet/> <xtce:BinaryDataEncoding> <xtce:SizeInBits> <xtce:FixedValue>128</xtce:FixedValue> </xtce:SizeInBits> </xtce:BinaryDataEncoding> </xtce:StringParameterType> <xtce:StringParameterType name="Basic_string_float32_Type" shortDescription="Generic string encoded as 32 bit IEEE-754 floating point encoding"> <xtce:UnitSet/> <xtce:FloatDataEncoding encoding="IEEE754_1985" sizeInBits="32"/> </xtce:StringParameterType> <xtce:StringParameterType name="Basic_string_float64_Type" shortDescription="Generic string encoded as 64 bit IEEE-754 floating point encoding"> <xtce:UnitSet/> <xtce:FloatDataEncoding encoding="IEEE754_1985" sizeInBits="64"/> </xtce:StringParameterType> <xtce:ArrayParameterType name="Array_Dim1_Float64_Type" arrayTypeRef="Basic_Float64_Type" numberOfDimensions="1"> <xtce:LongDescription>This is some calibration values for a payload device</xtce:LongDescription> </xtce:ArrayParameterType> <xtce:ArrayParameterType name="Array_Dim1_Float32_Type" arrayTypeRef="Basic_Float32_Type" numberOfDimensions="1"> <xtce:LongDescription>This is some more calibration values for a payload device</xtce:LongDescription> </xtce:ArrayParameterType> </xtce:ParameterTypeSet> <xtce:ParameterSet> <xtce:Parameter name="Payload_1_State" parameterTypeRef="Payload_1_State_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Payload_1_Phase" parameterTypeRef="Payload_1_Phase_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="enum_binary" parameterTypeRef="enum_binary_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="enum_float32" parameterTypeRef="enum_float32_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="enum_float64" parameterTypeRef="enum_float64_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="enum_string" parameterTypeRef="enum_string_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="enum_int16_signmag" parameterTypeRef="enum_int16_signmag_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="enum_int16_twoscomp" parameterTypeRef="enum_int16_twoscomp_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="enum_int16_onescomp" parameterTypeRef="enum_int16_onescomp_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Payload_1_Antenna_State" parameterTypeRef="Payload_1_Antenna_State_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>GCS</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Payload_Fault_Message" parameterTypeRef="Payload_Fault_Message_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="CPU_Fault_Message" parameterTypeRef="CPU_Fault_Message_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Payload_MD5" parameterTypeRef="Payload_MD5_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Basic_Float32" parameterTypeRef="Basic_Float32_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Basic_Float64" parameterTypeRef="Basic_Float64_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Basic_uint32" parameterTypeRef="Basic_uint32_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Basic_int32_signmag" parameterTypeRef="Basic_int32_signmag_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Basic_int32_twoscomp" parameterTypeRef="Basic_int32_twoscomp_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Basic_int32_onescomp" parameterTypeRef="Basic_int32_onescomp_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Basic_string_uint32" parameterTypeRef="Basic_string_uint32_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Basic_string_int32_signmag" parameterTypeRef="Basic_string_int32_signmag_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Basic_string_int32_twoscomp" parameterTypeRef="Basic_string_int32_twoscomp_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Basic_string_int32_onescomp" parameterTypeRef="Basic_string_int32_onescomp_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Basic_string_binary" parameterTypeRef="Basic_string_binary_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Basic_string_float32" parameterTypeRef="Basic_string_float32_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="Basic_string_float64" parameterTypeRef="Basic_string_float64_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>CPU</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="PAYLOAD_ANTENNA_POINTING_ARRAY1" parameterTypeRef="Array_Dim1_Float64_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>ANTENNA1</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> <xtce:Parameter name="PAYLOAD_ANTENNA_POINTING_ARRAY2" parameterTypeRef="Array_Dim1_Float32_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"> <xtce:SystemName>ANTENNA2</xtce:SystemName> </xtce:ParameterProperties> </xtce:Parameter> </xtce:ParameterSet> <xtce:ContainerSet> <xtce:SequenceContainer name="IncludedContainer1" shortDescription="Unit Test of container to include"> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="Basic_uint32"/> <xtce:ParameterRefEntry parameterRef="Basic_int32_signmag"/> <xtce:ParameterRefEntry parameterRef="Basic_int32_twoscomp"/> <xtce:ParameterRefEntry parameterRef="Basic_int32_onescomp"/> </xtce:EntryList> </xtce:SequenceContainer> <xtce:SequenceContainer name="IncludedContainer2" shortDescription="Unit Test of container to include"> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="Basic_Float32"/> <xtce:ParameterRefEntry parameterRef="Basic_Float64"/> <xtce:ParameterRefEntry parameterRef="enum_int16_signmag"/> <xtce:ParameterRefEntry parameterRef="enum_int16_twoscomp"/> <xtce:ParameterRefEntry parameterRef="enum_int16_onescomp"/> </xtce:EntryList> </xtce:SequenceContainer> <xtce:SequenceContainer name="IncludedContainer3" shortDescription="Unit Test of conditionally included container with conditionally included parameter"> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="enum_binary"/> <xtce:ParameterRefEntry parameterRef="enum_float32"/> <xtce:ParameterRefEntry parameterRef="enum_float64"> <xtce:IncludeCondition> <xtce:Comparison parameterRef="../BusElectronics/Solar_Array_Voltage_1_State" value="ON"/> </xtce:IncludeCondition> </xtce:ParameterRefEntry> <xtce:ParameterRefEntry parameterRef="enum_int16_signmag"> <xtce:IncludeCondition> <xtce:Comparison parameterRef="../BusElectronics/Solar_Array_Voltage_1_State" comparisonOperator="!=" value="ON"/> </xtce:IncludeCondition> </xtce:ParameterRefEntry> <xtce:ParameterRefEntry parameterRef="enum_int16_twoscomp"/> <xtce:ParameterRefEntry parameterRef="enum_int16_onescomp"/> </xtce:EntryList> </xtce:SequenceContainer> </xtce:ContainerSet> </xtce:TelemetryMetaData> <xtce:CommandMetaData> <xtce:ArgumentTypeSet> <xtce:EnumeratedArgumentType name="Payload_State_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="signMagnitude" sizeInBits="8"/> <xtce:EnumerationList> <xtce:Enumeration value="-1" label="OFF"/> <xtce:Enumeration value="1" label="ON"/> <xtce:Enumeration value="0" label="STANDBY"/> </xtce:EnumerationList> </xtce:EnumeratedArgumentType> <xtce:FloatArgumentType name="Output_Power_Type" shortDescription="Payload output power"> <xtce:UnitSet> <xtce:Unit description="current">Amperes</xtce:Unit> </xtce:UnitSet> <xtce:FloatDataEncoding sizeInBits="32" encoding="IEEE754_1985"/> </xtce:FloatArgumentType> <xtce:AggregateArgumentType name="Config_Item_Type"> <xtce:MemberList> <xtce:Member name="ADDRESS" typeRef="Address_Type"/> <xtce:Member name="VALUE32" typeRef="Value32_Type"/> </xtce:MemberList> </xtce:AggregateArgumentType> <xtce:IntegerArgumentType name="Address_Type" signed="false" shortDescription="Address of configurable"> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="32" encoding="unsigned"/> </xtce:IntegerArgumentType> <xtce:IntegerArgumentType name="Value32_Type" shortDescription="New value to set to 32 bit integer item"> <xtce:UnitSet/> <xtce:IntegerDataEncoding sizeInBits="32" encoding="unsigned"/> </xtce:IntegerArgumentType> </xtce:ArgumentTypeSet> <xtce:MetaCommandSet> <xtce:MetaCommand name="Payload_1_Control" shortDescription="Controls the state of payload operation"> <xtce:BaseMetaCommand metaCommandRef="/BogusSAT/CCSDSPUSTelecommand"/> <xtce:ArgumentList> <xtce:Argument name="STATE" argumentTypeRef="Payload_State_Type"/> <xtce:Argument name="OUTPUT_POWER" argumentTypeRef="Output_Power_Type"> <xtce:LongDescription>Long Description of the output power argument</xtce:LongDescription> </xtce:Argument> </xtce:ArgumentList> <xtce:CommandContainer name="Payload_1_Control_Container"> <xtce:BaseContainer containerRef="/BogusSAT/CCSDSPUSTelecommand"/> <xtce:EntryList> <xtce:ArgumentRefEntry argumentRef="STATE"/> <xtce:FixedValueEntry binaryValue="f0" sizeInBits="8"/> <xtce:ArgumentRefEntry argumentRef="OUTPUT_POWER"/> </xtce:EntryList> </xtce:CommandContainer> </xtce:MetaCommand> <xtce:MetaCommand name="Adjust_Payload_1_Config" shortDescription="Modify payload configuration"> <xtce:LongDescription>Modifies an internal configurable item at a provided address for the payload processor</xtce:LongDescription> <xtce:BaseMetaCommand metaCommandRef="/BogusSAT/CCSDSPUSTelecommand"/> <xtce:ArgumentList> <xtce:Argument name="CFGITEM" argumentTypeRef="Config_Item_Type"/> </xtce:ArgumentList> <xtce:CommandContainer name="Payload_1_Control_Container"> <xtce:BaseContainer containerRef="/BogusSAT/CCSDSPUSTelecommand"/> <xtce:EntryList> <xtce:ArgumentRefEntry argumentRef="CFGITEM"/> </xtce:EntryList> </xtce:CommandContainer> </xtce:MetaCommand> </xtce:MetaCommandSet> </xtce:CommandMetaData> </xtce:SpaceSystem> <xtce:SpaceSystem name="Payload2"/> </xtce:SpaceSystem> <xtce:SpaceSystem name="LOG_MSGS"> <xtce:LongDescription>Example of variable length log messages from a satellite</xtce:LongDescription> <xtce:TelemetryMetaData> <xtce:ParameterTypeSet> <xtce:AbsoluteTimeParameterType name="POSIXTime_Type" shortDescription="POSIX UNIX Time 'timeval' which is 2 unsigned 32 bit integers"> <xtce:Encoding> <xtce:IntegerDataEncoding sizeInBits="64"/> </xtce:Encoding> <xtce:ReferenceTime> <xtce:Epoch>1970-01-01</xtce:Epoch> </xtce:ReferenceTime> </xtce:AbsoluteTimeParameterType> <xtce:EnumeratedParameterType name="LOGLEVEL_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="4" bitOrder="mostSignificantBitFirst"/> <xtce:EnumerationList> <xtce:Enumeration label="DEBUG" value="0"/> <xtce:Enumeration label="INFO" value="1"/> <xtce:Enumeration label="WARNING" value="2"/> <xtce:Enumeration label="ERROR" value="3"/> <xtce:Enumeration label="CRITICAL" value="4"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:IntegerParameterType name="UINT4BIT_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="4" bitOrder="mostSignificantBitFirst"/> </xtce:IntegerParameterType> <xtce:EnumeratedParameterType name="FACILITY_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="4" bitOrder="mostSignificantBitFirst"/> <xtce:EnumerationList> <xtce:Enumeration label="BUS" value="0"/> <xtce:Enumeration label="PAYLOAD" value="1"/> <xtce:Enumeration label="OS" value="2"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:IntegerParameterType name="UINT8_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="8" bitOrder="mostSignificantBitFirst"/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="UINT16_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="16" bitOrder="mostSignificantBitFirst"/> </xtce:IntegerParameterType> <xtce:IntegerParameterType name="UINT32_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="32" bitOrder="mostSignificantBitFirst"/> </xtce:IntegerParameterType> <xtce:EnumeratedParameterType name="ERRORCODE_Type"> <xtce:UnitSet/> <xtce:IntegerDataEncoding encoding="unsigned" sizeInBits="16" bitOrder="mostSignificantBitFirst"/> <xtce:EnumerationList> <xtce:Enumeration value="123" label="ERROR_CODE_A" shortDescription="Detailed description of error case A"/> <xtce:Enumeration value="456" label="ERROR_CODE_B" shortDescription="Detailed description of error case B"/> <xtce:Enumeration value="789" label="ERROR_CODE_C" shortDescription="Detailed description of error case C"/> <xtce:Enumeration value="25" label="ERROR_CODE_D" shortDescription="Detailed description of error case D"/> <xtce:Enumeration value="50" label="ERROR_CODE_E" shortDescription="Detailed description of error case E"/> </xtce:EnumerationList> </xtce:EnumeratedParameterType> <xtce:BinaryParameterType name="Binary128_Type"> <xtce:UnitSet/> <xtce:BinaryDataEncoding> <xtce:SizeInBits> <xtce:FixedValue>128</xtce:FixedValue> </xtce:SizeInBits> </xtce:BinaryDataEncoding> </xtce:BinaryParameterType> <xtce:BinaryParameterType name="Binary256_Type"> <xtce:UnitSet/> <xtce:BinaryDataEncoding> <xtce:SizeInBits> <xtce:FixedValue>256</xtce:FixedValue> </xtce:SizeInBits> </xtce:BinaryDataEncoding> </xtce:BinaryParameterType> </xtce:ParameterTypeSet> <xtce:ParameterSet> <xtce:Parameter name="RECORDFLAG" initialValue="3735928559" parameterTypeRef="UINT32_Type" shortDescription="Record Marker"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="LOGLEVEL" parameterTypeRef="LOGLEVEL_Type" shortDescription="Log entry severity level"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="FACILITY" parameterTypeRef="FACILITY_Type" shortDescription="Subsystem or facility flag"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="ERRORCODE" parameterTypeRef="ERRORCODE_Type" shortDescription="Error code enumeration"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="DATAWORDS" parameterTypeRef="UINT8_Type" shortDescription="Number of words of supplementary data for the error code"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="LOGTIME" parameterTypeRef="POSIXTime_Type" shortDescription="Time of log record"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="DYNAMIC_REGION_1" parameterTypeRef="Binary128_Type" shortDescription="Dynamic binary data space"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="DYNAMIC_REGION_2" parameterTypeRef="Binary256_Type" shortDescription="Dynamic binary data space"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="WRAP_FLAG" parameterTypeRef="UINT16_Type" shortDescription="Rolling wrap around has occurred"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="START_POINTER" parameterTypeRef="UINT16_Type" shortDescription="Current starting pointer at lowest time entry"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="END_POINTER" parameterTypeRef="UINT16_Type" shortDescription="Current ending pointer at lowest time entry"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="SIZE_USED" parameterTypeRef="UINT16_Type" shortDescription="Number of words used"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="ERROR_CODE_B_DETAIL_WORD_1" parameterTypeRef="UINT32_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="ERROR_CODE_C_DETAIL_WORD_1" parameterTypeRef="UINT32_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="ERROR_CODE_C_DETAIL_WORD_2" parameterTypeRef="UINT32_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="ERROR_CODE_D_DETAIL_WORD_1" parameterTypeRef="UINT32_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="ERROR_CODE_D_DETAIL_WORD_2" parameterTypeRef="UINT32_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> <xtce:Parameter name="ERROR_CODE_D_DETAIL_WORD_3" parameterTypeRef="UINT32_Type"> <xtce:ParameterProperties dataSource="telemetered" readOnly="true"/> </xtce:Parameter> </xtce:ParameterSet> <xtce:ContainerSet> <xtce:SequenceContainer name="LOG_DATA"> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="RECORDFLAG"/> <xtce:ParameterRefEntry parameterRef="LOGLEVEL"/> <xtce:ParameterRefEntry parameterRef="FACILITY"/> <xtce:ParameterRefEntry parameterRef="ERRORCODE"/> <xtce:ParameterRefEntry parameterRef="DATAWORDS"/> <xtce:ParameterRefEntry parameterRef="LOGTIME"/> <xtce:ParameterRefEntry parameterRef="ERROR_CODE_B_DETAIL_WORD_1"> <xtce:IncludeCondition> <xtce:Comparison value="456" useCalibratedValue="false" parameterRef="ERRORCODE"/> </xtce:IncludeCondition> </xtce:ParameterRefEntry> <xtce:ParameterRefEntry parameterRef="ERROR_CODE_C_DETAIL_WORD_1"> <xtce:IncludeCondition> <xtce:Comparison value="789" useCalibratedValue="false" parameterRef="ERRORCODE"/> </xtce:IncludeCondition> </xtce:ParameterRefEntry> <xtce:ParameterRefEntry parameterRef="ERROR_CODE_C_DETAIL_WORD_2"> <xtce:IncludeCondition> <xtce:Comparison value="789" useCalibratedValue="false" parameterRef="ERRORCODE"/> </xtce:IncludeCondition> </xtce:ParameterRefEntry> <xtce:ParameterRefEntry parameterRef="ERROR_CODE_D_DETAIL_WORD_1"> <xtce:IncludeCondition> <xtce:Comparison value="25" useCalibratedValue="false" parameterRef="ERRORCODE"/> </xtce:IncludeCondition> </xtce:ParameterRefEntry> <xtce:ParameterRefEntry parameterRef="ERROR_CODE_D_DETAIL_WORD_2"> <xtce:IncludeCondition> <xtce:Comparison value="25" useCalibratedValue="false" parameterRef="ERRORCODE"/> </xtce:IncludeCondition> </xtce:ParameterRefEntry> <xtce:ParameterRefEntry parameterRef="ERROR_CODE_D_DETAIL_WORD_3"> <xtce:IncludeCondition> <xtce:Comparison value="25" useCalibratedValue="false" parameterRef="ERRORCODE"/> </xtce:IncludeCondition> </xtce:ParameterRefEntry> </xtce:EntryList> </xtce:SequenceContainer> <xtce:SequenceContainer name="LOG_FOOTER"> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="WRAP_FLAG"/> <xtce:ParameterRefEntry parameterRef="START_POINTER"/> <xtce:ParameterRefEntry parameterRef="END_POINTER"/> <xtce:ParameterRefEntry parameterRef="SIZE_USED"/> </xtce:EntryList> </xtce:SequenceContainer> <xtce:SequenceContainer name="LOG_ALL"> <xtce:EntryList> <xtce:ContainerRefEntry containerRef="LOG_DYNAMIC_MEMORY"/> <xtce:ContainerRefEntry containerRef="LOG_DATA"> <xtce:RepeatEntry> <xtce:Count> <xtce:FixedValue>10</xtce:FixedValue> </xtce:Count> </xtce:RepeatEntry> </xtce:ContainerRefEntry> <!-- 128 bits + 256 bits + 2048 bits (256 bytes) = 2432 bits --> <xtce:ContainerRefEntry containerRef="LOG_FOOTER"> <xtce:LocationInContainerInBits referenceLocation="containerStart"> <xtce:FixedValue>2432</xtce:FixedValue> </xtce:LocationInContainerInBits> </xtce:ContainerRefEntry> </xtce:EntryList> </xtce:SequenceContainer> <xtce:SequenceContainer name="LOG_DYNAMIC_MEMORY"> <xtce:EntryList> <xtce:ParameterRefEntry parameterRef="DYNAMIC_REGION_1"/> <xtce:ParameterRefEntry parameterRef="DYNAMIC_REGION_2"/> </xtce:EntryList> </xtce:SequenceContainer> </xtce:ContainerSet> <xtce:StreamSet> <xtce:VariableFrameStream name="LOG_DATA"> <xtce:ContainerRef containerRef="LOG_DATA"/> <xtce:SyncStrategy> <xtce:Flag/> </xtce:SyncStrategy> </xtce:VariableFrameStream> <xtce:VariableFrameStream name="LOG_FOOTER"> <xtce:ContainerRef containerRef="LOG_FOOTER"/> <xtce:SyncStrategy> <xtce:Flag/> </xtce:SyncStrategy> </xtce:VariableFrameStream> <xtce:VariableFrameStream name="LOG_DYNAMIC_MEMORY"> <xtce:ContainerRef containerRef="LOG_DYNAMIC_MEMORY"/> <xtce:SyncStrategy> <xtce:Flag/> </xtce:SyncStrategy> </xtce:VariableFrameStream> <xtce:VariableFrameStream name="LOG_ALL"> <xtce:ContainerRef containerRef="LOG_ALL"/> <xtce:SyncStrategy> <xtce:Flag/> </xtce:SyncStrategy> </xtce:VariableFrameStream> </xtce:StreamSet> </xtce:TelemetryMetaData> </xtce:SpaceSystem> </xtce:SpaceSystem>