org.apache.xerces.impl.msg.XMLMessages.properties Maven / Gradle / Ivy
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# This file contains error and warning messages related to XML
# The messages are arranged in key and value tuples in a ListResourceBundle.
#
# @version $Id: XMLMessages.properties 595214 2007-11-15 05:32:38Z mrglavas $
BadMessageKey = The error message corresponding to the message key can not be found.
FormatFailed = An internal error occurred while formatting the following message:\n
# Document messages
PrematureEOF=Premature end of file.
# 2.1 Well-Formed XML Documents
RootElementRequired = The root element is required in a well-formed document.
# 2.2 Characters
InvalidCharInCDSect = An invalid XML character (Unicode: 0x{0}) was found in the CDATA section.
InvalidCharInContent = An invalid XML character (Unicode: 0x{0}) was found in the element content of the document.
TwoColonsInQName = An invalid second ':' was found in the element type or attribute name.
ColonNotLegalWithNS = A colon is not allowed in the name ''{0}'' when namespaces are enabled.
InvalidCharInMisc = An invalid XML character (Unicode: 0x{0}) was found in markup after the end of the element content.
InvalidCharInProlog = An invalid XML character (Unicode: 0x{0}) was found in the prolog of the document.
InvalidCharInXMLDecl = An invalid XML character (Unicode: 0x{0}) was found in the XML declaration.
# 2.4 Character Data and Markup
CDEndInContent = The character sequence \"]]>\" must not appear in content unless used to mark the end of a CDATA section.
# 2.7 CDATA Sections
CDSectUnterminated = The CDATA section must end with \"]]>\".
# 2.8 Prolog and Document Type Declaration
XMLDeclMustBeFirst = The XML declaration may only appear at the very beginning of the document.
EqRequiredInXMLDecl = The '' = '' character must follow \"{0}\" in the XML declaration.
QuoteRequiredInXMLDecl = The value following \"{0}\" in the XML declaration must be a quoted string.
XMLDeclUnterminated = The XML declaration must end with \"?>\".
VersionInfoRequired = The version is required in the XML declaration.
SpaceRequiredBeforeVersionInXMLDecl = White space is required before the version pseudo attribute in the XML declaration.
SpaceRequiredBeforeEncodingInXMLDecl = White space is required before the encoding pseudo attribute in the XML declaration.
SpaceRequiredBeforeStandalone = White space is required before the encoding pseudo attribute in the XML declaration.
MarkupNotRecognizedInProlog = The markup in the document preceding the root element must be well-formed.
MarkupNotRecognizedInMisc = The markup in the document following the root element must be well-formed.
AlreadySeenDoctype = Already seen doctype.
DoctypeNotAllowed = DOCTYPE is disallowed when the feature "http://apache.org/xml/features/disallow-doctype-decl" set to true.
ContentIllegalInProlog = Content is not allowed in prolog.
ReferenceIllegalInProlog = Reference is not allowed in prolog.
# Trailing Misc
ContentIllegalInTrailingMisc=Content is not allowed in trailing section.
ReferenceIllegalInTrailingMisc=Reference is not allowed in trailing section.
# 2.9 Standalone Document Declaration
SDDeclInvalid = The standalone document declaration value must be \"yes\" or \"no\", not \"{0}\".
# 2.12 Language Identification
XMLLangInvalid = The xml:lang attribute value \"{0}\" is an invalid language identifier.
# 3. Logical Structures
ETagRequired = The element type \"{0}\" must be terminated by the matching end-tag \"\".
# 3.1 Start-Tags, End-Tags, and Empty-Element Tags
ElementUnterminated = Element type \"{0}\" must be followed by either attribute specifications, \">\" or \"/>\".
EqRequiredInAttribute = Attribute name \"{1}\" associated with an element type \"{0}\" must be followed by the '' = '' character.
OpenQuoteExpected = Open quote is expected for attribute \"{1}\" associated with an element type \"{0}\".
CloseQuoteExpected = Close quote is expected for attribute \"{1}\" associated with an element type \"{0}\".
AttributeNotUnique = Attribute \"{1}\" was already specified for element \"{0}\".
AttributeNSNotUnique = Attribute \"{1}\" bound to namespace \"{2}\" was already specified for element \"{0}\".
ETagUnterminated = The end-tag for element type \"{0}\" must end with a ''>'' delimiter.
MarkupNotRecognizedInContent = The content of elements must consist of well-formed character data or markup.
DoctypeIllegalInContent = A DOCTYPE is not allowed in content.
# 4.1 Character and Entity References
ReferenceUnterminated = The reference must be terminated by a ';' delimiter.
# 4.3.2 Well-Formed Parsed Entities
ReferenceNotInOneEntity = The reference must be entirely contained within the same parsed entity.
ElementEntityMismatch = The element \"{0}\" must start and end within the same entity.
MarkupEntityMismatch=XML document structures must start and end within the same entity.
# Messages common to Document and DTD
# 2.2 Characters
InvalidCharInAttValue = An invalid XML character (Unicode: 0x{2}) was found in the value of attribute \"{1}\" and element is \"{0}\".
InvalidCharInComment = An invalid XML character (Unicode: 0x{0}) was found in the comment.
InvalidCharInPI = An invalid XML character (Unicode: 0x{0}) was found in the processing instruction.
InvalidCharInInternalSubset = An invalid XML character (Unicode: 0x{0}) was found in the internal subset of the DTD.
InvalidCharInTextDecl = An invalid XML character (Unicode: 0x{0}) was found in the text declaration.
# 2.3 Common Syntactic Constructs
QuoteRequiredInAttValue = The value of attribute \"{1}\" must begin with either a single or double quote character.
LessthanInAttValue = The value of attribute \"{1}\" associated with an element type \"{0}\" must not contain the ''<'' character.
AttributeValueUnterminated = The value for attribute \"{1}\" must end with the matching quote character.
# 2.5 Comments
InvalidCommentStart = Comment must start with \"\".
COMMENT_NOT_IN_ONE_ENTITY = The comment is not enclosed in the same entity.
# 2.6 Processing Instructions
PITargetRequired = The processing instruction must begin with the name of the target.
SpaceRequiredInPI = White space is required between the processing instruction target and data.
PIUnterminated = The processing instruction must end with \"?>\".
ReservedPITarget = The processing instruction target matching \"[xX][mM][lL]\" is not allowed.
PI_NOT_IN_ONE_ENTITY = The processing instruction is not enclosed in the same entity.
# 2.8 Prolog and Document Type Declaration
VersionInfoInvalid = Invalid version \"{0}\".
VersionNotSupported = XML version \"{0}\" is not supported, only XML 1.0 is supported.
VersionNotSupported11 = XML version \"{0}\" is not supported, only XML 1.0 and XML 1.1 are supported.
# 4.1 Character and Entity References
DigitRequiredInCharRef = A decimal representation must immediately follow the \"&#\" in a character reference.
HexdigitRequiredInCharRef = A hexadecimal representation must immediately follow the \"&#x\" in a character reference.
SemicolonRequiredInCharRef = The character reference must end with the ';' delimiter.
InvalidCharRef = Character reference \"&#{0}\" is an invalid XML character.
NameRequiredInReference = The entity name must immediately follow the '&' in the entity reference.
SemicolonRequiredInReference = The reference to entity \"{0}\" must end with the '';'' delimiter.
# 4.3.1 The Text Declaration
TextDeclMustBeFirst = The text declaration may only appear at the very beginning of the external parsed entity.
EqRequiredInTextDecl = The '' = '' character must follow \"{0}\" in the text declaration.
QuoteRequiredInTextDecl = The value following \"{0}\" in the text declaration must be a quoted string.
CloseQuoteMissingInTextDecl = closing quote in the value following \"{0}\" in the text declaration is missing.
SpaceRequiredBeforeVersionInTextDecl = White space is required before the version pseudo attribute in the text declaration.
SpaceRequiredBeforeEncodingInTextDecl = White space is required before the encoding pseudo attribute in the text declaration.
TextDeclUnterminated = The text declaration must end with \"?>\".
EncodingDeclRequired = The encoding declaration is required in the text declaration.
NoMorePseudoAttributes = No more pseudo attributes are allowed.
MorePseudoAttributes = More pseudo attributes are expected.
PseudoAttrNameExpected = A pseudo attribute name is expected.
# 4.3.2 Well-Formed Parsed Entities
CommentNotInOneEntity = The comment must be entirely contained within the same parsed entity.
PINotInOneEntity = The processing instruction must be entirely contained within the same parsed entity.
# 4.3.3 Character Encoding in Entities
EncodingDeclInvalid = Invalid encoding name \"{0}\".
EncodingByteOrderUnsupported = Given byte order for encoding \"{0}\" is not supported.
InvalidByte = Invalid byte {0} of {1}-byte UTF-8 sequence.
ExpectedByte = Expected byte {0} of {1}-byte UTF-8 sequence.
InvalidHighSurrogate = High surrogate bits in UTF-8 sequence must not exceed 0x10 but found 0x{0}.
OperationNotSupported = Operation \"{0}\" not supported by {1} reader.
InvalidASCII = Byte \"{0}\" is not a member of the (7-bit) ASCII character set.
CharConversionFailure = An entity determined to be in a certain encoding must not contain sequences illegal in that encoding.
# DTD Messages
# 2.2 Characters
InvalidCharInEntityValue = An invalid XML character (Unicode: 0x{0}) was found in the literal entity value.
InvalidCharInExternalSubset = An invalid XML character (Unicode: 0x{0}) was found in the external subset of the DTD.
InvalidCharInIgnoreSect = An invalid XML character (Unicode: 0x{0}) was found in the excluded conditional section.
InvalidCharInPublicID = An invalid XML character (Unicode: 0x{0}) was found in the public identifier.
InvalidCharInSystemID = An invalid XML character (Unicode: 0x{0}) was found in the system identifier.
# 2.3 Common Syntactic Constructs
SpaceRequiredAfterSYSTEM = White space is required after keyword SYSTEM in DOCTYPE decl.
QuoteRequiredInSystemID = The system identifier must begin with either a single or double quote character.
SystemIDUnterminated = The system identifier must end with the matching quote character.
SpaceRequiredAfterPUBLIC = White spaces are required after keyword PUBLIC in DOCTYPE decl.
QuoteRequiredInPublicID = The public identifier must begin with either a single or double quote character.
PublicIDUnterminated = The public identifier must end with the matching quote character.
PubidCharIllegal = The character (Unicode: 0x{0}) is not permitted in the public identifier.
SpaceRequiredBetweenPublicAndSystem = White spaces are required between publicId and systemId.
# 2.8 Prolog and Document Type Declaration
MSG_SPACE_REQUIRED_BEFORE_ROOT_ELEMENT_TYPE_IN_DOCTYPEDECL = White space is required after \"''.
PEReferenceWithinMarkup = The parameter entity reference \"%{0};\" cannot occur within markup in the internal subset of the DTD.
MSG_MARKUP_NOT_RECOGNIZED_IN_DTD = The markup declarations contained or pointed to by the document type declaration must be well-formed.
# 2.10 White Space Handling
MSG_XML_SPACE_DECLARATION_ILLEGAL = The attribute declaration for \"xml:space\" must be given as an enumerated type whose only possible values are \"default\" and \"preserve\".
# 3.2 Element Type Declarations
MSG_SPACE_REQUIRED_BEFORE_ELEMENT_TYPE_IN_ELEMENTDECL = White space is required after \"''.
# 3.2.1 Element Content
MSG_OPEN_PAREN_OR_ELEMENT_TYPE_REQUIRED_IN_CHILDREN = A ''('' character or an element type is required in the declaration of element type \"{0}\".
MSG_CLOSE_PAREN_REQUIRED_IN_CHILDREN = A '')'' is required in the declaration of element type \"{0}\".
# 3.2.2 Mixed Content
MSG_ELEMENT_TYPE_REQUIRED_IN_MIXED_CONTENT = An element type is required in the declaration of element type \"{0}\".
MSG_CLOSE_PAREN_REQUIRED_IN_MIXED = A '')'' is required in the declaration of element type \"{0}\".
MixedContentUnterminated = The mixed content model \"{0}\" must end with \")*\" when the types of child elements are constrained.
# 3.3 Attribute-List Declarations
MSG_SPACE_REQUIRED_BEFORE_ELEMENT_TYPE_IN_ATTLISTDECL = White space is required after \"\".
IgnoreSectUnterminated = The excluded conditional section must end with \"]]>\".
# 4.1 Character and Entity References
NameRequiredInPEReference = The entity name must immediately follow the '%' in the parameter entity reference.
SemicolonRequiredInPEReference = The parameter entity reference \"%{0};\" must end with the '';'' delimiter.
# 4.2 Entity Declarations
MSG_SPACE_REQUIRED_BEFORE_ENTITY_NAME_IN_ENTITYDECL = White space is required after \"''.
MSG_DUPLICATE_ENTITY_DEFINITION = Entity \"{0}\" is declared more than once.
# 4.2.2 External Entities
ExternalIDRequired = The external entity declaration must begin with either \"SYSTEM\" or \"PUBLIC\".
MSG_SPACE_REQUIRED_BEFORE_PUBIDLITERAL_IN_EXTERNALID = White space is required between \"PUBLIC\" and the public identifier.
MSG_SPACE_REQUIRED_AFTER_PUBIDLITERAL_IN_EXTERNALID = White space is required between the public identifier and the system identifier.
MSG_SPACE_REQUIRED_BEFORE_SYSTEMLITERAL_IN_EXTERNALID = White space is required between \"SYSTEM\" and the system identifier.
MSG_URI_FRAGMENT_IN_SYSTEMID = The fragment identifier should not be specified as part of the system identifier \"{0}\".
# 4.7 Notation Declarations
MSG_SPACE_REQUIRED_BEFORE_NOTATION_NAME_IN_NOTATIONDECL = White space is required after \"''.
# Validation messages
DuplicateTypeInMixedContent = The element type \"{1}\" was already specified in the content model of the element decl \"{0}\".
ENTITIESInvalid = Attribute value \"{1}\" of type ENTITIES must be the names of one or more unparsed entities.
ENTITYInvalid = Attribute value \"{1}\" of type ENTITY must be the name of an unparsed entity.
IDDefaultTypeInvalid = The ID attribute \"{0}\" must have a declared default of \"#IMPLIED\" or \"#REQUIRED\".
IDInvalid = Attribute value \"{0}\" of type ID must be a name.
IDInvalidWithNamespaces = Attribute value \"{0}\" of type ID must be an NCName when namespaces are enabled.
IDNotUnique = Attribute value \"{0}\" of type ID must be unique within the document.
IDREFInvalid = Attribute value \"{0}\" of type IDREF must be a name.
IDREFInvalidWithNamespaces = Attribute value \"{0}\" of type IDREF must be an NCName when namespaces are enabled.
IDREFSInvalid = Attribute value \"{0}\" of type IDREFS must be one or more names.
ILL_FORMED_PARAMETER_ENTITY_WHEN_USED_IN_DECL = The replacement text of parameter entity \"{0}\" must include properly nested declarations when the entity reference is used as a complete declaration.
ImproperDeclarationNesting = The replacement text of parameter entity \"{0}\" must include properly nested declarations.
ImproperGroupNesting = The replacement text of parameter entity \"{0}\" must include properly nested pairs of parentheses.
INVALID_PE_IN_CONDITIONAL = The replacement text of parameter entity \"{0}\" must include the entire conditional section or just INCLUDE or IGNORE.
MSG_ATTRIBUTE_NOT_DECLARED = Attribute \"{1}\" must be declared for element type \"{0}\".
MSG_ATTRIBUTE_VALUE_NOT_IN_LIST = Attribute \"{0}\" with value \"{1}\" must have a value from the list \"{2}\".
MSG_ATTVALUE_CHANGED_DURING_NORMALIZATION_WHEN_STANDALONE = The value \"{1}\" of attribute \"{0}\" must not be changed by normalization (to \"{2}\") in a standalone document.
MSG_CONTENT_INCOMPLETE = The content of element type \"{0}\" is incomplete, it must match \"{1}\".
MSG_CONTENT_INVALID = The content of element type \"{0}\" must match \"{1}\".
MSG_CONTENT_INVALID_SPECIFIED = The content of element type \"{0}\" must match \"{1}\". Children of type \"{2}\" are not allowed.
MSG_DEFAULTED_ATTRIBUTE_NOT_SPECIFIED = Attribute \"{1}\" for element type \"{0}\" has a default value and must be specified in a standalone document.
MSG_DUPLICATE_ATTDEF = Attribute \"{1}\" is already declared for element type \"{0}\".
MSG_ELEMENT_ALREADY_DECLARED = Element type \"{0}\" must not be declared more than once.
MSG_ELEMENT_NOT_DECLARED = Element type \"{0}\" must be declared.
MSG_GRAMMAR_NOT_FOUND = Document is invalid: no grammar found.
MSG_ELEMENT_WITH_ID_REQUIRED = An element with the identifier \"{0}\" must appear in the document.
MSG_EXTERNAL_ENTITY_NOT_PERMITTED = The reference to external entity \"{0}\" is not permitted in a standalone document.
MSG_FIXED_ATTVALUE_INVALID = Attribute \"{1}\" with value \"{2}\" must have a value of \"{3}\".
MSG_MORE_THAN_ONE_ID_ATTRIBUTE = Element type \"{0}\" already has attribute \"{1}\" of type ID, a second attribute \"{2}\" of type ID is not permitted.
MSG_MORE_THAN_ONE_NOTATION_ATTRIBUTE = Element type \"{0}\" already has attribute \"{1}\" of type NOTATION, a second attribute \"{2}\" of type NOTATION is not permitted.
MSG_NOTATION_NOT_DECLARED_FOR_NOTATIONTYPE_ATTRIBUTE = The notation \"{1}\" must be declared when referenced in the notation type list for attribute \"{0}\".
MSG_NOTATION_NOT_DECLARED_FOR_UNPARSED_ENTITYDECL = The notation \"{1}\" must be declared when referenced in the unparsed entity declaration for \"{0}\".
MSG_REFERENCE_TO_EXTERNALLY_DECLARED_ENTITY_WHEN_STANDALONE = The reference to entity \"{0}\" declared in the external subset of the DTD or in a parameter entity is not permitted in a standalone document.
MSG_REQUIRED_ATTRIBUTE_NOT_SPECIFIED = Attribute \"{1}\" is required and must be specified for element type \"{0}\".
MSG_WHITE_SPACE_IN_ELEMENT_CONTENT_WHEN_STANDALONE = In a standalone document white space must not occur between elements with element content which are declared in the external subset of the DTD or in a parameter entity.
NMTOKENInvalid = Attribute value \"{0}\" of type NMTOKEN must be a name token.
NMTOKENSInvalid = Attribute value \"{0}\" of type NMTOKENS must be one or more name tokens.
NoNotationOnEmptyElement = Element type \"{0}\" which was declared EMPTY cannot declare attribute \"{1}\" of type NOTATION.
RootElementTypeMustMatchDoctypedecl = Document root element \"{1}\", must match DOCTYPE root \"{0}\".
UndeclaredElementInContentSpec = The content model of element \"{0}\" refers to the undeclared element \"{1}\".
UniqueNotationName = The declaration for the notation \"{0}\" is not unique. A given Name must not be declared in more than one notation declaration.
ENTITYFailedInitializeGrammar = ENTITYDatatype Validator: Failed Need to call initialize method with a valid Grammar reference.
ENTITYNotUnparsed = ENTITY \"{0}\" is not unparsed.
ENTITYNotValid = ENTITY \"{0}\" is not valid.
EmptyList = Value of type ENTITIES, IDREFS, and NMTOKENS cannot be empty list.
# Entity related messages
# 3.1 Start-Tags, End-Tags, and Empty-Element Tags
ReferenceToExternalEntity = The external entity reference \"&{0};\" is not permitted in an attribute value.
# 4.1 Character and Entity References
EntityNotDeclared = The entity \"{0}\" was referenced, but not declared.
ReferenceToUnparsedEntity = The unparsed entity reference \"&{0};\" is not permitted.
RecursiveReference = Recursive entity reference \"{0}\". (Reference path: {1}),
RecursiveGeneralReference = Recursive general entity reference \"&{0};\". (Reference path: {1}),
RecursivePEReference = Recursive parameter entity reference \"%{0};\". (Reference path: {1}),
# 4.3.3 Character Encoding in Entities
EncodingNotSupported = The encoding \"{0}\" is not supported.
EncodingRequired = A parsed entity not encoded in either UTF-8 or UTF-16 must contain an encoding declaration.
# Namespaces support
# 4. Using Qualified Names
IllegalQName = Element or attribute do not match QName production: QName::=(NCName':')?NCName.
ElementXMLNSPrefix = Element \"{0}\" cannot have \"xmlns\" as its prefix.
ElementPrefixUnbound = The prefix \"{0}\" for element \"{1}\" is not bound.
AttributePrefixUnbound = The prefix \"{2}\" for attribute \"{1}\" associated with an element type \"{0}\" is not bound.
EmptyPrefixedAttName = The value of the attribute \"{0}\" is invalid. Prefixed namespace bindings may not be empty.
PrefixDeclared = The namespace prefix \"{0}\" was not declared.
CantBindXMLNS = The prefix "xmlns" cannot be bound to any namespace explicitly; neither can the namespace for "xmlns" be bound to any prefix explicitly.
CantBindXML = The prefix "xml" cannot be bound to any namespace other than its usual namespace; neither can the namespace for "xml" be bound to any prefix other than "xml".
MSG_ATT_DEFAULT_INVALID = The defaultValue \"{1}\" of attribute \"{0}\" is not legal as for the lexical constraints of this attribute type.
# REVISIT: These need messages
MSG_SPACE_REQUIRED_AFTER_SYSTEMLITERAL_IN_EXTERNALID=MSG_SPACE_REQUIRED_AFTER_SYSTEMLITERAL_IN_EXTERNALID
OpenQuoteMissingInDecl=OpenQuoteMissingInDecl
InvalidCharInLiteral=InvalidCharInLiteral
#Application can set the limit of number of entities that should be expanded by the parser.
EntityExpansionLimitExceeded=The parser has encountered more than \"{0}\" entity expansions in this document; this is the limit imposed by the application.
© 2015 - 2024 Weber Informatics LLC | Privacy Policy