software.amazon.awssdk.services.ecs.EcsClient Maven / Gradle / Ivy
/*
* Copyright Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package software.amazon.awssdk.services.ecs;
import java.util.function.Consumer;
import software.amazon.awssdk.annotations.Generated;
import software.amazon.awssdk.annotations.SdkPublicApi;
import software.amazon.awssdk.annotations.ThreadSafe;
import software.amazon.awssdk.awscore.AwsClient;
import software.amazon.awssdk.awscore.exception.AwsServiceException;
import software.amazon.awssdk.core.exception.SdkClientException;
import software.amazon.awssdk.regions.ServiceMetadata;
import software.amazon.awssdk.services.ecs.model.AccessDeniedException;
import software.amazon.awssdk.services.ecs.model.AttributeLimitExceededException;
import software.amazon.awssdk.services.ecs.model.BlockedException;
import software.amazon.awssdk.services.ecs.model.ClientException;
import software.amazon.awssdk.services.ecs.model.ClusterContainsContainerInstancesException;
import software.amazon.awssdk.services.ecs.model.ClusterContainsServicesException;
import software.amazon.awssdk.services.ecs.model.ClusterContainsTasksException;
import software.amazon.awssdk.services.ecs.model.ClusterNotFoundException;
import software.amazon.awssdk.services.ecs.model.ConflictException;
import software.amazon.awssdk.services.ecs.model.CreateCapacityProviderRequest;
import software.amazon.awssdk.services.ecs.model.CreateCapacityProviderResponse;
import software.amazon.awssdk.services.ecs.model.CreateClusterRequest;
import software.amazon.awssdk.services.ecs.model.CreateClusterResponse;
import software.amazon.awssdk.services.ecs.model.CreateServiceRequest;
import software.amazon.awssdk.services.ecs.model.CreateServiceResponse;
import software.amazon.awssdk.services.ecs.model.CreateTaskSetRequest;
import software.amazon.awssdk.services.ecs.model.CreateTaskSetResponse;
import software.amazon.awssdk.services.ecs.model.DeleteAccountSettingRequest;
import software.amazon.awssdk.services.ecs.model.DeleteAccountSettingResponse;
import software.amazon.awssdk.services.ecs.model.DeleteAttributesRequest;
import software.amazon.awssdk.services.ecs.model.DeleteAttributesResponse;
import software.amazon.awssdk.services.ecs.model.DeleteCapacityProviderRequest;
import software.amazon.awssdk.services.ecs.model.DeleteCapacityProviderResponse;
import software.amazon.awssdk.services.ecs.model.DeleteClusterRequest;
import software.amazon.awssdk.services.ecs.model.DeleteClusterResponse;
import software.amazon.awssdk.services.ecs.model.DeleteServiceRequest;
import software.amazon.awssdk.services.ecs.model.DeleteServiceResponse;
import software.amazon.awssdk.services.ecs.model.DeleteTaskDefinitionsRequest;
import software.amazon.awssdk.services.ecs.model.DeleteTaskDefinitionsResponse;
import software.amazon.awssdk.services.ecs.model.DeleteTaskSetRequest;
import software.amazon.awssdk.services.ecs.model.DeleteTaskSetResponse;
import software.amazon.awssdk.services.ecs.model.DeregisterContainerInstanceRequest;
import software.amazon.awssdk.services.ecs.model.DeregisterContainerInstanceResponse;
import software.amazon.awssdk.services.ecs.model.DeregisterTaskDefinitionRequest;
import software.amazon.awssdk.services.ecs.model.DeregisterTaskDefinitionResponse;
import software.amazon.awssdk.services.ecs.model.DescribeCapacityProvidersRequest;
import software.amazon.awssdk.services.ecs.model.DescribeCapacityProvidersResponse;
import software.amazon.awssdk.services.ecs.model.DescribeClustersRequest;
import software.amazon.awssdk.services.ecs.model.DescribeClustersResponse;
import software.amazon.awssdk.services.ecs.model.DescribeContainerInstancesRequest;
import software.amazon.awssdk.services.ecs.model.DescribeContainerInstancesResponse;
import software.amazon.awssdk.services.ecs.model.DescribeServicesRequest;
import software.amazon.awssdk.services.ecs.model.DescribeServicesResponse;
import software.amazon.awssdk.services.ecs.model.DescribeTaskDefinitionRequest;
import software.amazon.awssdk.services.ecs.model.DescribeTaskDefinitionResponse;
import software.amazon.awssdk.services.ecs.model.DescribeTaskSetsRequest;
import software.amazon.awssdk.services.ecs.model.DescribeTaskSetsResponse;
import software.amazon.awssdk.services.ecs.model.DescribeTasksRequest;
import software.amazon.awssdk.services.ecs.model.DescribeTasksResponse;
import software.amazon.awssdk.services.ecs.model.DiscoverPollEndpointRequest;
import software.amazon.awssdk.services.ecs.model.DiscoverPollEndpointResponse;
import software.amazon.awssdk.services.ecs.model.EcsException;
import software.amazon.awssdk.services.ecs.model.ExecuteCommandRequest;
import software.amazon.awssdk.services.ecs.model.ExecuteCommandResponse;
import software.amazon.awssdk.services.ecs.model.GetTaskProtectionRequest;
import software.amazon.awssdk.services.ecs.model.GetTaskProtectionResponse;
import software.amazon.awssdk.services.ecs.model.InvalidParameterException;
import software.amazon.awssdk.services.ecs.model.LimitExceededException;
import software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest;
import software.amazon.awssdk.services.ecs.model.ListAccountSettingsResponse;
import software.amazon.awssdk.services.ecs.model.ListAttributesRequest;
import software.amazon.awssdk.services.ecs.model.ListAttributesResponse;
import software.amazon.awssdk.services.ecs.model.ListClustersRequest;
import software.amazon.awssdk.services.ecs.model.ListClustersResponse;
import software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest;
import software.amazon.awssdk.services.ecs.model.ListContainerInstancesResponse;
import software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceRequest;
import software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceResponse;
import software.amazon.awssdk.services.ecs.model.ListServicesRequest;
import software.amazon.awssdk.services.ecs.model.ListServicesResponse;
import software.amazon.awssdk.services.ecs.model.ListTagsForResourceRequest;
import software.amazon.awssdk.services.ecs.model.ListTagsForResourceResponse;
import software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest;
import software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesResponse;
import software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest;
import software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsResponse;
import software.amazon.awssdk.services.ecs.model.ListTasksRequest;
import software.amazon.awssdk.services.ecs.model.ListTasksResponse;
import software.amazon.awssdk.services.ecs.model.MissingVersionException;
import software.amazon.awssdk.services.ecs.model.NamespaceNotFoundException;
import software.amazon.awssdk.services.ecs.model.NoUpdateAvailableException;
import software.amazon.awssdk.services.ecs.model.PlatformTaskDefinitionIncompatibilityException;
import software.amazon.awssdk.services.ecs.model.PlatformUnknownException;
import software.amazon.awssdk.services.ecs.model.PutAccountSettingDefaultRequest;
import software.amazon.awssdk.services.ecs.model.PutAccountSettingDefaultResponse;
import software.amazon.awssdk.services.ecs.model.PutAccountSettingRequest;
import software.amazon.awssdk.services.ecs.model.PutAccountSettingResponse;
import software.amazon.awssdk.services.ecs.model.PutAttributesRequest;
import software.amazon.awssdk.services.ecs.model.PutAttributesResponse;
import software.amazon.awssdk.services.ecs.model.PutClusterCapacityProvidersRequest;
import software.amazon.awssdk.services.ecs.model.PutClusterCapacityProvidersResponse;
import software.amazon.awssdk.services.ecs.model.RegisterContainerInstanceRequest;
import software.amazon.awssdk.services.ecs.model.RegisterContainerInstanceResponse;
import software.amazon.awssdk.services.ecs.model.RegisterTaskDefinitionRequest;
import software.amazon.awssdk.services.ecs.model.RegisterTaskDefinitionResponse;
import software.amazon.awssdk.services.ecs.model.ResourceInUseException;
import software.amazon.awssdk.services.ecs.model.ResourceNotFoundException;
import software.amazon.awssdk.services.ecs.model.RunTaskRequest;
import software.amazon.awssdk.services.ecs.model.RunTaskResponse;
import software.amazon.awssdk.services.ecs.model.ServerException;
import software.amazon.awssdk.services.ecs.model.ServiceNotActiveException;
import software.amazon.awssdk.services.ecs.model.ServiceNotFoundException;
import software.amazon.awssdk.services.ecs.model.StartTaskRequest;
import software.amazon.awssdk.services.ecs.model.StartTaskResponse;
import software.amazon.awssdk.services.ecs.model.StopTaskRequest;
import software.amazon.awssdk.services.ecs.model.StopTaskResponse;
import software.amazon.awssdk.services.ecs.model.SubmitAttachmentStateChangesRequest;
import software.amazon.awssdk.services.ecs.model.SubmitAttachmentStateChangesResponse;
import software.amazon.awssdk.services.ecs.model.SubmitContainerStateChangeRequest;
import software.amazon.awssdk.services.ecs.model.SubmitContainerStateChangeResponse;
import software.amazon.awssdk.services.ecs.model.SubmitTaskStateChangeRequest;
import software.amazon.awssdk.services.ecs.model.SubmitTaskStateChangeResponse;
import software.amazon.awssdk.services.ecs.model.TagResourceRequest;
import software.amazon.awssdk.services.ecs.model.TagResourceResponse;
import software.amazon.awssdk.services.ecs.model.TargetNotConnectedException;
import software.amazon.awssdk.services.ecs.model.TargetNotFoundException;
import software.amazon.awssdk.services.ecs.model.TaskSetNotFoundException;
import software.amazon.awssdk.services.ecs.model.UnsupportedFeatureException;
import software.amazon.awssdk.services.ecs.model.UntagResourceRequest;
import software.amazon.awssdk.services.ecs.model.UntagResourceResponse;
import software.amazon.awssdk.services.ecs.model.UpdateCapacityProviderRequest;
import software.amazon.awssdk.services.ecs.model.UpdateCapacityProviderResponse;
import software.amazon.awssdk.services.ecs.model.UpdateClusterRequest;
import software.amazon.awssdk.services.ecs.model.UpdateClusterResponse;
import software.amazon.awssdk.services.ecs.model.UpdateClusterSettingsRequest;
import software.amazon.awssdk.services.ecs.model.UpdateClusterSettingsResponse;
import software.amazon.awssdk.services.ecs.model.UpdateContainerAgentRequest;
import software.amazon.awssdk.services.ecs.model.UpdateContainerAgentResponse;
import software.amazon.awssdk.services.ecs.model.UpdateContainerInstancesStateRequest;
import software.amazon.awssdk.services.ecs.model.UpdateContainerInstancesStateResponse;
import software.amazon.awssdk.services.ecs.model.UpdateInProgressException;
import software.amazon.awssdk.services.ecs.model.UpdateServicePrimaryTaskSetRequest;
import software.amazon.awssdk.services.ecs.model.UpdateServicePrimaryTaskSetResponse;
import software.amazon.awssdk.services.ecs.model.UpdateServiceRequest;
import software.amazon.awssdk.services.ecs.model.UpdateServiceResponse;
import software.amazon.awssdk.services.ecs.model.UpdateTaskProtectionRequest;
import software.amazon.awssdk.services.ecs.model.UpdateTaskProtectionResponse;
import software.amazon.awssdk.services.ecs.model.UpdateTaskSetRequest;
import software.amazon.awssdk.services.ecs.model.UpdateTaskSetResponse;
import software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable;
import software.amazon.awssdk.services.ecs.paginators.ListAttributesIterable;
import software.amazon.awssdk.services.ecs.paginators.ListClustersIterable;
import software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable;
import software.amazon.awssdk.services.ecs.paginators.ListServicesByNamespaceIterable;
import software.amazon.awssdk.services.ecs.paginators.ListServicesIterable;
import software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable;
import software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable;
import software.amazon.awssdk.services.ecs.paginators.ListTasksIterable;
import software.amazon.awssdk.services.ecs.waiters.EcsWaiter;
/**
* Service client for accessing Amazon ECS. This can be created using the static {@link #builder()} method.
*
* Amazon Elastic Container Service
*
* Amazon Elastic Container Service (Amazon ECS) is a highly scalable, fast, container management service. It makes it
* easy to run, stop, and manage Docker containers. You can host your cluster on a serverless infrastructure that's
* managed by Amazon ECS by launching your services or tasks on Fargate. For more control, you can host your tasks on a
* cluster of Amazon Elastic Compute Cloud (Amazon EC2) or External (on-premises) instances that you manage.
*
*
* Amazon ECS makes it easy to launch and stop container-based applications with simple API calls. This makes it easy to
* get the state of your cluster from a centralized service, and gives you access to many familiar Amazon EC2 features.
*
*
* You can use Amazon ECS to schedule the placement of containers across your cluster based on your resource needs,
* isolation policies, and availability requirements. With Amazon ECS, you don't need to operate your own cluster
* management and configuration management systems. You also don't need to worry about scaling your management
* infrastructure.
*
*/
@Generated("software.amazon.awssdk:codegen")
@SdkPublicApi
@ThreadSafe
public interface EcsClient extends AwsClient {
String SERVICE_NAME = "ecs";
/**
* Value for looking up the service's metadata from the
* {@link software.amazon.awssdk.regions.ServiceMetadataProvider}.
*/
String SERVICE_METADATA_ID = "ecs";
/**
*
* Creates a new capacity provider. Capacity providers are associated with an Amazon ECS cluster and are used in
* capacity provider strategies to facilitate cluster auto scaling.
*
*
* Only capacity providers that use an Auto Scaling group can be created. Amazon ECS tasks on Fargate use the
* FARGATE and FARGATE_SPOT capacity providers. These providers are available to all
* accounts in the Amazon Web Services Regions that Fargate supports.
*
*
* @param createCapacityProviderRequest
* @return Result of the CreateCapacityProvider operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws LimitExceededException
* The limit for the resource was exceeded.
* @throws UpdateInProgressException
* There's already a current Amazon ECS container agent update in progress on the container instance that's
* specified. If the container agent becomes disconnected while it's in a transitional stage, such as
* PENDING or STAGING, the update process can get stuck in that state. However,
* when the agent reconnects, it resumes where it stopped previously.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.CreateCapacityProvider
* @see AWS
* API Documentation
*/
default CreateCapacityProviderResponse createCapacityProvider(CreateCapacityProviderRequest createCapacityProviderRequest)
throws ServerException, ClientException, InvalidParameterException, LimitExceededException,
UpdateInProgressException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Creates a new capacity provider. Capacity providers are associated with an Amazon ECS cluster and are used in
* capacity provider strategies to facilitate cluster auto scaling.
*
*
* Only capacity providers that use an Auto Scaling group can be created. Amazon ECS tasks on Fargate use the
* FARGATE and FARGATE_SPOT capacity providers. These providers are available to all
* accounts in the Amazon Web Services Regions that Fargate supports.
*
*
*
* This is a convenience which creates an instance of the {@link CreateCapacityProviderRequest.Builder} avoiding the
* need to create one manually via {@link CreateCapacityProviderRequest#builder()}
*
*
* @param createCapacityProviderRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.CreateCapacityProviderRequest.Builder} to create a
* request.
* @return Result of the CreateCapacityProvider operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws LimitExceededException
* The limit for the resource was exceeded.
* @throws UpdateInProgressException
* There's already a current Amazon ECS container agent update in progress on the container instance that's
* specified. If the container agent becomes disconnected while it's in a transitional stage, such as
* PENDING or STAGING, the update process can get stuck in that state. However,
* when the agent reconnects, it resumes where it stopped previously.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.CreateCapacityProvider
* @see AWS
* API Documentation
*/
default CreateCapacityProviderResponse createCapacityProvider(
Consumer createCapacityProviderRequest) throws ServerException,
ClientException, InvalidParameterException, LimitExceededException, UpdateInProgressException, AwsServiceException,
SdkClientException, EcsException {
return createCapacityProvider(CreateCapacityProviderRequest.builder().applyMutation(createCapacityProviderRequest)
.build());
}
/**
*
* Creates a new Amazon ECS cluster. By default, your account receives a default cluster when you
* launch your first container instance. However, you can create your own cluster with a unique name with the
* CreateCluster action.
*
*
*
* When you call the CreateCluster API operation, Amazon ECS attempts to create the Amazon ECS service-linked
* role for your account. This is so that it can manage required resources in other Amazon Web Services services on
* your behalf. However, if the user that makes the call doesn't have permissions to create the service-linked role,
* it isn't created. For more information, see Using
* service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
*
*
*
* @param createClusterRequest
* @return Result of the CreateCluster operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.CreateCluster
* @see AWS API
* Documentation
*/
default CreateClusterResponse createCluster(CreateClusterRequest createClusterRequest) throws ServerException,
ClientException, InvalidParameterException, NamespaceNotFoundException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Creates a new Amazon ECS cluster. By default, your account receives a default cluster when you
* launch your first container instance. However, you can create your own cluster with a unique name with the
* CreateCluster action.
*
*
*
* When you call the CreateCluster API operation, Amazon ECS attempts to create the Amazon ECS service-linked
* role for your account. This is so that it can manage required resources in other Amazon Web Services services on
* your behalf. However, if the user that makes the call doesn't have permissions to create the service-linked role,
* it isn't created. For more information, see Using
* service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link CreateClusterRequest.Builder} avoiding the need to
* create one manually via {@link CreateClusterRequest#builder()}
*
*
* @param createClusterRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.CreateClusterRequest.Builder} to create a request.
* @return Result of the CreateCluster operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.CreateCluster
* @see AWS API
* Documentation
*/
default CreateClusterResponse createCluster(Consumer createClusterRequest)
throws ServerException, ClientException, InvalidParameterException, NamespaceNotFoundException, AwsServiceException,
SdkClientException, EcsException {
return createCluster(CreateClusterRequest.builder().applyMutation(createClusterRequest).build());
}
/**
*
* Creates a new Amazon ECS cluster. By default, your account receives a default cluster when you
* launch your first container instance. However, you can create your own cluster with a unique name with the
* CreateCluster action.
*
*
*
* When you call the CreateCluster API operation, Amazon ECS attempts to create the Amazon ECS service-linked
* role for your account. This is so that it can manage required resources in other Amazon Web Services services on
* your behalf. However, if the user that makes the call doesn't have permissions to create the service-linked role,
* it isn't created. For more information, see Using
* service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
*
*
*
* @return Result of the CreateCluster operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.CreateCluster
* @see #createCluster(CreateClusterRequest)
* @see AWS API
* Documentation
*/
default CreateClusterResponse createCluster() throws ServerException, ClientException, InvalidParameterException,
NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException {
return createCluster(CreateClusterRequest.builder().build());
}
/**
*
* Runs and maintains your desired number of tasks from a specified task definition. If the number of tasks running
* in a service drops below the desiredCount, Amazon ECS runs another copy of the task in the specified
* cluster. To update an existing service, see the UpdateService action.
*
*
*
* Starting April 15, 2023, Amazon Web Services will not onboard new customers to Amazon Elastic Inference (EI), and
* will help current customers migrate their workloads to options that offer better price and performance. After
* April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon
* SageMaker, Amazon ECS, or Amazon EC2. However, customers who have used Amazon EI at least once during the past
* 30-day period are considered current customers and will be able to continue using the service.
*
*
*
* In addition to maintaining the desired count of tasks in your service, you can optionally run your service behind
* one or more load balancers. The load balancers distribute traffic across the tasks that are associated with the
* service. For more information, see Service load
* balancing in the Amazon Elastic Container Service Developer Guide.
*
*
* Tasks for services that don't use a load balancer are considered healthy if they're in the RUNNING
* state. Tasks for services that use a load balancer are considered healthy if they're in the RUNNING
* state and are reported as healthy by the load balancer.
*
*
* There are two service scheduler strategies available:
*
*
* -
*
* REPLICA - The replica scheduling strategy places and maintains your desired number of tasks across
* your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task
* placement strategies and constraints to customize task placement decisions. For more information, see Service scheduler
* concepts in the Amazon Elastic Container Service Developer Guide.
*
*
* -
*
* DAEMON - The daemon scheduling strategy deploys exactly one task on each active container instance
* that meets all of the task placement constraints that you specify in your cluster. The service scheduler also
* evaluates the task placement constraints for running tasks. It also stops tasks that don't meet the placement
* constraints. When using this strategy, you don't need to specify a desired number of tasks, a task placement
* strategy, or use Service Auto Scaling policies. For more information, see Service scheduler
* concepts in the Amazon Elastic Container Service Developer Guide.
*
*
*
*
* You can optionally specify a deployment configuration for your service. The deployment is initiated by changing
* properties. For example, the deployment might be initiated by the task definition or by your desired count of a
* service. This is done with an UpdateService operation. The default value for a replica service for
* minimumHealthyPercent is 100%. The default value for a daemon service for
* minimumHealthyPercent is 0%.
*
*
* If a service uses the ECS deployment controller, the minimum healthy percent represents a lower
* limit on the number of tasks in a service that must remain in the RUNNING state during a deployment.
* Specifically, it represents it as a percentage of your desired number of tasks (rounded up to the nearest
* integer). This happens when any of your container instances are in the DRAINING state if the service
* contains tasks using the EC2 launch type. Using this parameter, you can deploy without using additional cluster
* capacity. For example, if you set your service to have desired number of four tasks and a minimum healthy percent
* of 50%, the scheduler might stop two existing tasks to free up cluster capacity before starting two new tasks. If
* they're in the RUNNING state, tasks for services that don't use a load balancer are considered
* healthy . If they're in the RUNNING state and reported as healthy by the load balancer, tasks for
* services that do use a load balancer are considered healthy . The default value for minimum healthy
* percent is 100%.
*
*
* If a service uses the ECS deployment controller, the maximum percent parameter represents an
* upper limit on the number of tasks in a service that are allowed in the RUNNING or
* PENDING state during a deployment. Specifically, it represents it as a percentage of the desired
* number of tasks (rounded down to the nearest integer). This happens when any of your container instances are in
* the DRAINING state if the service contains tasks using the EC2 launch type. Using this parameter,
* you can define the deployment batch size. For example, if your service has a desired number of four tasks and a
* maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks
* (provided that the cluster resources required to do this are available). The default value for maximum percent is
* 200%.
*
*
* If a service uses either the CODE_DEPLOY or EXTERNAL deployment controller types and
* tasks that use the EC2 launch type, the minimum healthy percent and maximum percent values are used
* only to define the lower and upper limit on the number of the tasks in the service that remain in the
* RUNNING state. This is while the container instances are in the DRAINING state. If the
* tasks in the service use the Fargate launch type, the minimum healthy percent and maximum percent values aren't
* used. This is the case even if they're currently visible when describing your service.
*
*
* When creating a service that uses the EXTERNAL deployment controller, you can specify only
* parameters that aren't controlled at the task set level. The only required parameter is the service name. You
* control your services using the CreateTaskSet operation. For more information, see Amazon ECS deployment
* types in the Amazon Elastic Container Service Developer Guide.
*
*
* When the service scheduler launches new tasks, it determines task placement. For information about task placement
* and task placement strategies, see Amazon ECS task
* placement in the Amazon Elastic Container Service Developer Guide.
*
*
* @param createServiceRequest
* @return Result of the CreateService operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws PlatformUnknownException
* The specified platform version doesn't exist.
* @throws PlatformTaskDefinitionIncompatibilityException
* The specified platform version doesn't satisfy the required capabilities of the task definition.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.CreateService
* @see AWS API
* Documentation
*/
default CreateServiceResponse createService(CreateServiceRequest createServiceRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException,
PlatformUnknownException, PlatformTaskDefinitionIncompatibilityException, AccessDeniedException,
NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Runs and maintains your desired number of tasks from a specified task definition. If the number of tasks running
* in a service drops below the desiredCount, Amazon ECS runs another copy of the task in the specified
* cluster. To update an existing service, see the UpdateService action.
*
*
*
* Starting April 15, 2023, Amazon Web Services will not onboard new customers to Amazon Elastic Inference (EI), and
* will help current customers migrate their workloads to options that offer better price and performance. After
* April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon
* SageMaker, Amazon ECS, or Amazon EC2. However, customers who have used Amazon EI at least once during the past
* 30-day period are considered current customers and will be able to continue using the service.
*
*
*
* In addition to maintaining the desired count of tasks in your service, you can optionally run your service behind
* one or more load balancers. The load balancers distribute traffic across the tasks that are associated with the
* service. For more information, see Service load
* balancing in the Amazon Elastic Container Service Developer Guide.
*
*
* Tasks for services that don't use a load balancer are considered healthy if they're in the RUNNING
* state. Tasks for services that use a load balancer are considered healthy if they're in the RUNNING
* state and are reported as healthy by the load balancer.
*
*
* There are two service scheduler strategies available:
*
*
* -
*
* REPLICA - The replica scheduling strategy places and maintains your desired number of tasks across
* your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task
* placement strategies and constraints to customize task placement decisions. For more information, see Service scheduler
* concepts in the Amazon Elastic Container Service Developer Guide.
*
*
* -
*
* DAEMON - The daemon scheduling strategy deploys exactly one task on each active container instance
* that meets all of the task placement constraints that you specify in your cluster. The service scheduler also
* evaluates the task placement constraints for running tasks. It also stops tasks that don't meet the placement
* constraints. When using this strategy, you don't need to specify a desired number of tasks, a task placement
* strategy, or use Service Auto Scaling policies. For more information, see Service scheduler
* concepts in the Amazon Elastic Container Service Developer Guide.
*
*
*
*
* You can optionally specify a deployment configuration for your service. The deployment is initiated by changing
* properties. For example, the deployment might be initiated by the task definition or by your desired count of a
* service. This is done with an UpdateService operation. The default value for a replica service for
* minimumHealthyPercent is 100%. The default value for a daemon service for
* minimumHealthyPercent is 0%.
*
*
* If a service uses the ECS deployment controller, the minimum healthy percent represents a lower
* limit on the number of tasks in a service that must remain in the RUNNING state during a deployment.
* Specifically, it represents it as a percentage of your desired number of tasks (rounded up to the nearest
* integer). This happens when any of your container instances are in the DRAINING state if the service
* contains tasks using the EC2 launch type. Using this parameter, you can deploy without using additional cluster
* capacity. For example, if you set your service to have desired number of four tasks and a minimum healthy percent
* of 50%, the scheduler might stop two existing tasks to free up cluster capacity before starting two new tasks. If
* they're in the RUNNING state, tasks for services that don't use a load balancer are considered
* healthy . If they're in the RUNNING state and reported as healthy by the load balancer, tasks for
* services that do use a load balancer are considered healthy . The default value for minimum healthy
* percent is 100%.
*
*
* If a service uses the ECS deployment controller, the maximum percent parameter represents an
* upper limit on the number of tasks in a service that are allowed in the RUNNING or
* PENDING state during a deployment. Specifically, it represents it as a percentage of the desired
* number of tasks (rounded down to the nearest integer). This happens when any of your container instances are in
* the DRAINING state if the service contains tasks using the EC2 launch type. Using this parameter,
* you can define the deployment batch size. For example, if your service has a desired number of four tasks and a
* maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks
* (provided that the cluster resources required to do this are available). The default value for maximum percent is
* 200%.
*
*
* If a service uses either the CODE_DEPLOY or EXTERNAL deployment controller types and
* tasks that use the EC2 launch type, the minimum healthy percent and maximum percent values are used
* only to define the lower and upper limit on the number of the tasks in the service that remain in the
* RUNNING state. This is while the container instances are in the DRAINING state. If the
* tasks in the service use the Fargate launch type, the minimum healthy percent and maximum percent values aren't
* used. This is the case even if they're currently visible when describing your service.
*
*
* When creating a service that uses the EXTERNAL deployment controller, you can specify only
* parameters that aren't controlled at the task set level. The only required parameter is the service name. You
* control your services using the CreateTaskSet operation. For more information, see Amazon ECS deployment
* types in the Amazon Elastic Container Service Developer Guide.
*
*
* When the service scheduler launches new tasks, it determines task placement. For information about task placement
* and task placement strategies, see Amazon ECS task
* placement in the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link CreateServiceRequest.Builder} avoiding the need to
* create one manually via {@link CreateServiceRequest#builder()}
*
*
* @param createServiceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.CreateServiceRequest.Builder} to create a request.
* @return Result of the CreateService operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws PlatformUnknownException
* The specified platform version doesn't exist.
* @throws PlatformTaskDefinitionIncompatibilityException
* The specified platform version doesn't satisfy the required capabilities of the task definition.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.CreateService
* @see AWS API
* Documentation
*/
default CreateServiceResponse createService(Consumer createServiceRequest)
throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException,
UnsupportedFeatureException, PlatformUnknownException, PlatformTaskDefinitionIncompatibilityException,
AccessDeniedException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException {
return createService(CreateServiceRequest.builder().applyMutation(createServiceRequest).build());
}
/**
*
* Create a task set in the specified cluster and service. This is used when a service uses the
* EXTERNAL deployment controller type. For more information, see Amazon ECS deployment
* types in the Amazon Elastic Container Service Developer Guide.
*
*
* You can create a maximum of 5 tasks sets for a deployment.
*
*
* @param createTaskSetRequest
* @return Result of the CreateTaskSet operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws PlatformUnknownException
* The specified platform version doesn't exist.
* @throws PlatformTaskDefinitionIncompatibilityException
* The specified platform version doesn't satisfy the required capabilities of the task definition.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws ServiceNotActiveException
* The specified service isn't active. You can't update a service that's inactive. If you have previously
* deleted a service, you can re-create it with CreateService.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.CreateTaskSet
* @see AWS API
* Documentation
*/
default CreateTaskSetResponse createTaskSet(CreateTaskSetRequest createTaskSetRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException,
PlatformUnknownException, PlatformTaskDefinitionIncompatibilityException, AccessDeniedException,
ServiceNotFoundException, ServiceNotActiveException, NamespaceNotFoundException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Create a task set in the specified cluster and service. This is used when a service uses the
* EXTERNAL deployment controller type. For more information, see Amazon ECS deployment
* types in the Amazon Elastic Container Service Developer Guide.
*
*
* You can create a maximum of 5 tasks sets for a deployment.
*
*
*
* This is a convenience which creates an instance of the {@link CreateTaskSetRequest.Builder} avoiding the need to
* create one manually via {@link CreateTaskSetRequest#builder()}
*
*
* @param createTaskSetRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.CreateTaskSetRequest.Builder} to create a request.
* @return Result of the CreateTaskSet operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws PlatformUnknownException
* The specified platform version doesn't exist.
* @throws PlatformTaskDefinitionIncompatibilityException
* The specified platform version doesn't satisfy the required capabilities of the task definition.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws ServiceNotActiveException
* The specified service isn't active. You can't update a service that's inactive. If you have previously
* deleted a service, you can re-create it with CreateService.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.CreateTaskSet
* @see AWS API
* Documentation
*/
default CreateTaskSetResponse createTaskSet(Consumer createTaskSetRequest)
throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException,
UnsupportedFeatureException, PlatformUnknownException, PlatformTaskDefinitionIncompatibilityException,
AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException, NamespaceNotFoundException,
AwsServiceException, SdkClientException, EcsException {
return createTaskSet(CreateTaskSetRequest.builder().applyMutation(createTaskSetRequest).build());
}
/**
*
* Disables an account setting for a specified user, role, or the root user for an account.
*
*
* @param deleteAccountSettingRequest
* @return Result of the DeleteAccountSetting operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeleteAccountSetting
* @see AWS API
* Documentation
*/
default DeleteAccountSettingResponse deleteAccountSetting(DeleteAccountSettingRequest deleteAccountSettingRequest)
throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Disables an account setting for a specified user, role, or the root user for an account.
*
*
*
* This is a convenience which creates an instance of the {@link DeleteAccountSettingRequest.Builder} avoiding the
* need to create one manually via {@link DeleteAccountSettingRequest#builder()}
*
*
* @param deleteAccountSettingRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DeleteAccountSettingRequest.Builder} to create a request.
* @return Result of the DeleteAccountSetting operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeleteAccountSetting
* @see AWS API
* Documentation
*/
default DeleteAccountSettingResponse deleteAccountSetting(
Consumer deleteAccountSettingRequest) throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return deleteAccountSetting(DeleteAccountSettingRequest.builder().applyMutation(deleteAccountSettingRequest).build());
}
/**
*
* Deletes one or more custom attributes from an Amazon ECS resource.
*
*
* @param deleteAttributesRequest
* @return Result of the DeleteAttributes operation returned by the service.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws TargetNotFoundException
* The specified target wasn't found. You can view your available container instances with
* ListContainerInstances. Amazon ECS container instances are cluster-specific and Region-specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeleteAttributes
* @see AWS API
* Documentation
*/
default DeleteAttributesResponse deleteAttributes(DeleteAttributesRequest deleteAttributesRequest)
throws ClusterNotFoundException, TargetNotFoundException, InvalidParameterException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Deletes one or more custom attributes from an Amazon ECS resource.
*
*
*
* This is a convenience which creates an instance of the {@link DeleteAttributesRequest.Builder} avoiding the need
* to create one manually via {@link DeleteAttributesRequest#builder()}
*
*
* @param deleteAttributesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DeleteAttributesRequest.Builder} to create a request.
* @return Result of the DeleteAttributes operation returned by the service.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws TargetNotFoundException
* The specified target wasn't found. You can view your available container instances with
* ListContainerInstances. Amazon ECS container instances are cluster-specific and Region-specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeleteAttributes
* @see AWS API
* Documentation
*/
default DeleteAttributesResponse deleteAttributes(Consumer deleteAttributesRequest)
throws ClusterNotFoundException, TargetNotFoundException, InvalidParameterException, AwsServiceException,
SdkClientException, EcsException {
return deleteAttributes(DeleteAttributesRequest.builder().applyMutation(deleteAttributesRequest).build());
}
/**
*
* Deletes the specified capacity provider.
*
*
*
* The FARGATE and FARGATE_SPOT capacity providers are reserved and can't be deleted. You
* can disassociate them from a cluster using either the PutClusterCapacityProviders API or by deleting the
* cluster.
*
*
*
* Prior to a capacity provider being deleted, the capacity provider must be removed from the capacity provider
* strategy from all services. The UpdateService API can be used to remove a capacity provider from a
* service's capacity provider strategy. When updating a service, the forceNewDeployment option can be
* used to ensure that any tasks using the Amazon EC2 instance capacity provided by the capacity provider are
* transitioned to use the capacity from the remaining capacity providers. Only capacity providers that aren't
* associated with a cluster can be deleted. To remove a capacity provider from a cluster, you can either use
* PutClusterCapacityProviders or delete the cluster.
*
*
* @param deleteCapacityProviderRequest
* @return Result of the DeleteCapacityProvider operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeleteCapacityProvider
* @see AWS
* API Documentation
*/
default DeleteCapacityProviderResponse deleteCapacityProvider(DeleteCapacityProviderRequest deleteCapacityProviderRequest)
throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Deletes the specified capacity provider.
*
*
*
* The FARGATE and FARGATE_SPOT capacity providers are reserved and can't be deleted. You
* can disassociate them from a cluster using either the PutClusterCapacityProviders API or by deleting the
* cluster.
*
*
*
* Prior to a capacity provider being deleted, the capacity provider must be removed from the capacity provider
* strategy from all services. The UpdateService API can be used to remove a capacity provider from a
* service's capacity provider strategy. When updating a service, the forceNewDeployment option can be
* used to ensure that any tasks using the Amazon EC2 instance capacity provided by the capacity provider are
* transitioned to use the capacity from the remaining capacity providers. Only capacity providers that aren't
* associated with a cluster can be deleted. To remove a capacity provider from a cluster, you can either use
* PutClusterCapacityProviders or delete the cluster.
*
*
*
* This is a convenience which creates an instance of the {@link DeleteCapacityProviderRequest.Builder} avoiding the
* need to create one manually via {@link DeleteCapacityProviderRequest#builder()}
*
*
* @param deleteCapacityProviderRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DeleteCapacityProviderRequest.Builder} to create a
* request.
* @return Result of the DeleteCapacityProvider operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeleteCapacityProvider
* @see AWS
* API Documentation
*/
default DeleteCapacityProviderResponse deleteCapacityProvider(
Consumer deleteCapacityProviderRequest) throws ServerException,
ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return deleteCapacityProvider(DeleteCapacityProviderRequest.builder().applyMutation(deleteCapacityProviderRequest)
.build());
}
/**
*
* Deletes the specified cluster. The cluster transitions to the INACTIVE state. Clusters with an
* INACTIVE status might remain discoverable in your account for a period of time. However, this
* behavior is subject to change in the future. We don't recommend that you rely on INACTIVE clusters
* persisting.
*
*
* You must deregister all container instances from this cluster before you may delete it. You can list the
* container instances in a cluster with ListContainerInstances and deregister them with
* DeregisterContainerInstance.
*
*
* @param deleteClusterRequest
* @return Result of the DeleteCluster operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ClusterContainsContainerInstancesException
* You can't delete a cluster that has registered container instances. First, deregister the container
* instances before you can delete the cluster. For more information, see
* DeregisterContainerInstance.
* @throws ClusterContainsServicesException
* You can't delete a cluster that contains services. First, update the service to reduce its desired task
* count to 0, and then delete the service. For more information, see UpdateService and
* DeleteService.
* @throws ClusterContainsTasksException
* You can't delete a cluster that has active tasks.
* @throws UpdateInProgressException
* There's already a current Amazon ECS container agent update in progress on the container instance that's
* specified. If the container agent becomes disconnected while it's in a transitional stage, such as
* PENDING or STAGING, the update process can get stuck in that state. However,
* when the agent reconnects, it resumes where it stopped previously.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeleteCluster
* @see AWS API
* Documentation
*/
default DeleteClusterResponse deleteCluster(DeleteClusterRequest deleteClusterRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, ClusterContainsContainerInstancesException,
ClusterContainsServicesException, ClusterContainsTasksException, UpdateInProgressException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Deletes the specified cluster. The cluster transitions to the INACTIVE state. Clusters with an
* INACTIVE status might remain discoverable in your account for a period of time. However, this
* behavior is subject to change in the future. We don't recommend that you rely on INACTIVE clusters
* persisting.
*
*
* You must deregister all container instances from this cluster before you may delete it. You can list the
* container instances in a cluster with ListContainerInstances and deregister them with
* DeregisterContainerInstance.
*
*
*
* This is a convenience which creates an instance of the {@link DeleteClusterRequest.Builder} avoiding the need to
* create one manually via {@link DeleteClusterRequest#builder()}
*
*
* @param deleteClusterRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DeleteClusterRequest.Builder} to create a request.
* @return Result of the DeleteCluster operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ClusterContainsContainerInstancesException
* You can't delete a cluster that has registered container instances. First, deregister the container
* instances before you can delete the cluster. For more information, see
* DeregisterContainerInstance.
* @throws ClusterContainsServicesException
* You can't delete a cluster that contains services. First, update the service to reduce its desired task
* count to 0, and then delete the service. For more information, see UpdateService and
* DeleteService.
* @throws ClusterContainsTasksException
* You can't delete a cluster that has active tasks.
* @throws UpdateInProgressException
* There's already a current Amazon ECS container agent update in progress on the container instance that's
* specified. If the container agent becomes disconnected while it's in a transitional stage, such as
* PENDING or STAGING, the update process can get stuck in that state. However,
* when the agent reconnects, it resumes where it stopped previously.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeleteCluster
* @see AWS API
* Documentation
*/
default DeleteClusterResponse deleteCluster(Consumer deleteClusterRequest)
throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException,
ClusterContainsContainerInstancesException, ClusterContainsServicesException, ClusterContainsTasksException,
UpdateInProgressException, AwsServiceException, SdkClientException, EcsException {
return deleteCluster(DeleteClusterRequest.builder().applyMutation(deleteClusterRequest).build());
}
/**
*
* Deletes a specified service within a cluster. You can delete a service if you have no running tasks in it and the
* desired task count is zero. If the service is actively maintaining tasks, you can't delete it, and you must
* update the service to a desired task count of zero. For more information, see UpdateService.
*
*
*
* When you delete a service, if there are still running tasks that require cleanup, the service status moves from
* ACTIVE to DRAINING, and the service is no longer visible in the console or in the
* ListServices API operation. After all tasks have transitioned to either STOPPING or
* STOPPED status, the service status moves from DRAINING to INACTIVE.
* Services in the DRAINING or INACTIVE status can still be viewed with the
* DescribeServices API operation. However, in the future, INACTIVE services may be cleaned up
* and purged from Amazon ECS record keeping, and DescribeServices calls on those services return a
* ServiceNotFoundException error.
*
*
*
* If you attempt to create a new service with the same name as an existing service in either ACTIVE or
* DRAINING status, you receive an error.
*
*
*
* @param deleteServiceRequest
* @return Result of the DeleteService operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeleteService
* @see AWS API
* Documentation
*/
default DeleteServiceResponse deleteService(DeleteServiceRequest deleteServiceRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Deletes a specified service within a cluster. You can delete a service if you have no running tasks in it and the
* desired task count is zero. If the service is actively maintaining tasks, you can't delete it, and you must
* update the service to a desired task count of zero. For more information, see UpdateService.
*
*
*
* When you delete a service, if there are still running tasks that require cleanup, the service status moves from
* ACTIVE to DRAINING, and the service is no longer visible in the console or in the
* ListServices API operation. After all tasks have transitioned to either STOPPING or
* STOPPED status, the service status moves from DRAINING to INACTIVE.
* Services in the DRAINING or INACTIVE status can still be viewed with the
* DescribeServices API operation. However, in the future, INACTIVE services may be cleaned up
* and purged from Amazon ECS record keeping, and DescribeServices calls on those services return a
* ServiceNotFoundException error.
*
*
*
* If you attempt to create a new service with the same name as an existing service in either ACTIVE or
* DRAINING status, you receive an error.
*
*
*
* This is a convenience which creates an instance of the {@link DeleteServiceRequest.Builder} avoiding the need to
* create one manually via {@link DeleteServiceRequest#builder()}
*
*
* @param deleteServiceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DeleteServiceRequest.Builder} to create a request.
* @return Result of the DeleteService operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeleteService
* @see AWS API
* Documentation
*/
default DeleteServiceResponse deleteService(Consumer deleteServiceRequest)
throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException,
ServiceNotFoundException, AwsServiceException, SdkClientException, EcsException {
return deleteService(DeleteServiceRequest.builder().applyMutation(deleteServiceRequest).build());
}
/**
*
* Deletes one or more task definitions.
*
*
* You must deregister a task definition revision before you delete it. For more information, see DeregisterTaskDefinition.
*
*
* When you delete a task definition revision, it is immediately transitions from the INACTIVE to
* DELETE_IN_PROGRESS. Existing tasks and services that reference a DELETE_IN_PROGRESS
* task definition revision continue to run without disruption. Existing services that reference a
* DELETE_IN_PROGRESS task definition revision can still scale up or down by modifying the service's
* desired count.
*
*
* You can't use a DELETE_IN_PROGRESS task definition revision to run new tasks or create new services.
* You also can't update an existing service to reference a DELETE_IN_PROGRESS task definition
* revision.
*
*
* A task definition revision will stay in DELETE_IN_PROGRESS status until all the associated tasks and
* services have been terminated.
*
*
* When you delete all INACTIVE task definition revisions, the task definition name is not displayed in
* the console and not returned in the API. If a task definition revisions are in the
* DELETE_IN_PROGRESS state, the task definition name is displayed in the console and returned in the
* API. The task definition name is retained by Amazon ECS and the revision is incremented the next time you create
* a task definition with that name.
*
*
* @param deleteTaskDefinitionsRequest
* @return Result of the DeleteTaskDefinitions operation returned by the service.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeleteTaskDefinitions
* @see AWS API
* Documentation
*/
default DeleteTaskDefinitionsResponse deleteTaskDefinitions(DeleteTaskDefinitionsRequest deleteTaskDefinitionsRequest)
throws AccessDeniedException, ClientException, InvalidParameterException, ServerException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Deletes one or more task definitions.
*
*
* You must deregister a task definition revision before you delete it. For more information, see DeregisterTaskDefinition.
*
*
* When you delete a task definition revision, it is immediately transitions from the INACTIVE to
* DELETE_IN_PROGRESS. Existing tasks and services that reference a DELETE_IN_PROGRESS
* task definition revision continue to run without disruption. Existing services that reference a
* DELETE_IN_PROGRESS task definition revision can still scale up or down by modifying the service's
* desired count.
*
*
* You can't use a DELETE_IN_PROGRESS task definition revision to run new tasks or create new services.
* You also can't update an existing service to reference a DELETE_IN_PROGRESS task definition
* revision.
*
*
* A task definition revision will stay in DELETE_IN_PROGRESS status until all the associated tasks and
* services have been terminated.
*
*
* When you delete all INACTIVE task definition revisions, the task definition name is not displayed in
* the console and not returned in the API. If a task definition revisions are in the
* DELETE_IN_PROGRESS state, the task definition name is displayed in the console and returned in the
* API. The task definition name is retained by Amazon ECS and the revision is incremented the next time you create
* a task definition with that name.
*
*
*
* This is a convenience which creates an instance of the {@link DeleteTaskDefinitionsRequest.Builder} avoiding the
* need to create one manually via {@link DeleteTaskDefinitionsRequest#builder()}
*
*
* @param deleteTaskDefinitionsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DeleteTaskDefinitionsRequest.Builder} to create a
* request.
* @return Result of the DeleteTaskDefinitions operation returned by the service.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeleteTaskDefinitions
* @see AWS API
* Documentation
*/
default DeleteTaskDefinitionsResponse deleteTaskDefinitions(
Consumer deleteTaskDefinitionsRequest) throws AccessDeniedException,
ClientException, InvalidParameterException, ServerException, AwsServiceException, SdkClientException, EcsException {
return deleteTaskDefinitions(DeleteTaskDefinitionsRequest.builder().applyMutation(deleteTaskDefinitionsRequest).build());
}
/**
*
* Deletes a specified task set within a service. This is used when a service uses the EXTERNAL
* deployment controller type. For more information, see Amazon ECS deployment
* types in the Amazon Elastic Container Service Developer Guide.
*
*
* @param deleteTaskSetRequest
* @return Result of the DeleteTaskSet operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws ServiceNotActiveException
* The specified service isn't active. You can't update a service that's inactive. If you have previously
* deleted a service, you can re-create it with CreateService.
* @throws TaskSetNotFoundException
* The specified task set wasn't found. You can view your available task sets with DescribeTaskSets.
* Task sets are specific to each cluster, service and Region.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeleteTaskSet
* @see AWS API
* Documentation
*/
default DeleteTaskSetResponse deleteTaskSet(DeleteTaskSetRequest deleteTaskSetRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException,
AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException, TaskSetNotFoundException,
AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Deletes a specified task set within a service. This is used when a service uses the EXTERNAL
* deployment controller type. For more information, see Amazon ECS deployment
* types in the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link DeleteTaskSetRequest.Builder} avoiding the need to
* create one manually via {@link DeleteTaskSetRequest#builder()}
*
*
* @param deleteTaskSetRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DeleteTaskSetRequest.Builder} to create a request.
* @return Result of the DeleteTaskSet operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws ServiceNotActiveException
* The specified service isn't active. You can't update a service that's inactive. If you have previously
* deleted a service, you can re-create it with CreateService.
* @throws TaskSetNotFoundException
* The specified task set wasn't found. You can view your available task sets with DescribeTaskSets.
* Task sets are specific to each cluster, service and Region.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeleteTaskSet
* @see AWS API
* Documentation
*/
default DeleteTaskSetResponse deleteTaskSet(Consumer deleteTaskSetRequest)
throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException,
UnsupportedFeatureException, AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException,
TaskSetNotFoundException, AwsServiceException, SdkClientException, EcsException {
return deleteTaskSet(DeleteTaskSetRequest.builder().applyMutation(deleteTaskSetRequest).build());
}
/**
*
* Deregisters an Amazon ECS container instance from the specified cluster. This instance is no longer available to
* run tasks.
*
*
* If you intend to use the container instance for some other purpose after deregistration, we recommend that you
* stop all of the tasks running on the container instance before deregistration. That prevents any orphaned tasks
* from consuming resources.
*
*
* Deregistering a container instance removes the instance from a cluster, but it doesn't terminate the EC2
* instance. If you are finished using the instance, be sure to terminate it in the Amazon EC2 console to stop
* billing.
*
*
*
* If you terminate a running container instance, Amazon ECS automatically deregisters the instance from your
* cluster (stopped container instances or instances with disconnected agents aren't automatically deregistered when
* terminated).
*
*
*
* @param deregisterContainerInstanceRequest
* @return Result of the DeregisterContainerInstance operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeregisterContainerInstance
* @see AWS API Documentation
*/
default DeregisterContainerInstanceResponse deregisterContainerInstance(
DeregisterContainerInstanceRequest deregisterContainerInstanceRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Deregisters an Amazon ECS container instance from the specified cluster. This instance is no longer available to
* run tasks.
*
*
* If you intend to use the container instance for some other purpose after deregistration, we recommend that you
* stop all of the tasks running on the container instance before deregistration. That prevents any orphaned tasks
* from consuming resources.
*
*
* Deregistering a container instance removes the instance from a cluster, but it doesn't terminate the EC2
* instance. If you are finished using the instance, be sure to terminate it in the Amazon EC2 console to stop
* billing.
*
*
*
* If you terminate a running container instance, Amazon ECS automatically deregisters the instance from your
* cluster (stopped container instances or instances with disconnected agents aren't automatically deregistered when
* terminated).
*
*
*
* This is a convenience which creates an instance of the {@link DeregisterContainerInstanceRequest.Builder}
* avoiding the need to create one manually via {@link DeregisterContainerInstanceRequest#builder()}
*
*
* @param deregisterContainerInstanceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DeregisterContainerInstanceRequest.Builder} to create a
* request.
* @return Result of the DeregisterContainerInstance operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeregisterContainerInstance
* @see AWS API Documentation
*/
default DeregisterContainerInstanceResponse deregisterContainerInstance(
Consumer deregisterContainerInstanceRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException,
EcsException {
return deregisterContainerInstance(DeregisterContainerInstanceRequest.builder()
.applyMutation(deregisterContainerInstanceRequest).build());
}
/**
*
* Deregisters the specified task definition by family and revision. Upon deregistration, the task definition is
* marked as INACTIVE. Existing tasks and services that reference an INACTIVE task
* definition continue to run without disruption. Existing services that reference an INACTIVE task
* definition can still scale up or down by modifying the service's desired count. If you want to delete a task
* definition revision, you must first deregister the task definition revision.
*
*
* You can't use an INACTIVE task definition to run new tasks or create new services, and you can't
* update an existing service to reference an INACTIVE task definition. However, there may be up to a
* 10-minute window following deregistration where these restrictions have not yet taken effect.
*
*
*
* At this time, INACTIVE task definitions remain discoverable in your account indefinitely. However,
* this behavior is subject to change in the future. We don't recommend that you rely on INACTIVE task
* definitions persisting beyond the lifecycle of any associated tasks and services.
*
*
*
* You must deregister a task definition revision before you delete it. For more information, see DeleteTaskDefinitions.
*
*
* @param deregisterTaskDefinitionRequest
* @return Result of the DeregisterTaskDefinition operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeregisterTaskDefinition
* @see AWS
* API Documentation
*/
default DeregisterTaskDefinitionResponse deregisterTaskDefinition(
DeregisterTaskDefinitionRequest deregisterTaskDefinitionRequest) throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Deregisters the specified task definition by family and revision. Upon deregistration, the task definition is
* marked as INACTIVE. Existing tasks and services that reference an INACTIVE task
* definition continue to run without disruption. Existing services that reference an INACTIVE task
* definition can still scale up or down by modifying the service's desired count. If you want to delete a task
* definition revision, you must first deregister the task definition revision.
*
*
* You can't use an INACTIVE task definition to run new tasks or create new services, and you can't
* update an existing service to reference an INACTIVE task definition. However, there may be up to a
* 10-minute window following deregistration where these restrictions have not yet taken effect.
*
*
*
* At this time, INACTIVE task definitions remain discoverable in your account indefinitely. However,
* this behavior is subject to change in the future. We don't recommend that you rely on INACTIVE task
* definitions persisting beyond the lifecycle of any associated tasks and services.
*
*
*
* You must deregister a task definition revision before you delete it. For more information, see DeleteTaskDefinitions.
*
*
*
* This is a convenience which creates an instance of the {@link DeregisterTaskDefinitionRequest.Builder} avoiding
* the need to create one manually via {@link DeregisterTaskDefinitionRequest#builder()}
*
*
* @param deregisterTaskDefinitionRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DeregisterTaskDefinitionRequest.Builder} to create a
* request.
* @return Result of the DeregisterTaskDefinition operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DeregisterTaskDefinition
* @see AWS
* API Documentation
*/
default DeregisterTaskDefinitionResponse deregisterTaskDefinition(
Consumer deregisterTaskDefinitionRequest) throws ServerException,
ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return deregisterTaskDefinition(DeregisterTaskDefinitionRequest.builder().applyMutation(deregisterTaskDefinitionRequest)
.build());
}
/**
*
* Describes one or more of your capacity providers.
*
*
* @param describeCapacityProvidersRequest
* @return Result of the DescribeCapacityProviders operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeCapacityProviders
* @see AWS
* API Documentation
*/
default DescribeCapacityProvidersResponse describeCapacityProviders(
DescribeCapacityProvidersRequest describeCapacityProvidersRequest) throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Describes one or more of your capacity providers.
*
*
*
* This is a convenience which creates an instance of the {@link DescribeCapacityProvidersRequest.Builder} avoiding
* the need to create one manually via {@link DescribeCapacityProvidersRequest#builder()}
*
*
* @param describeCapacityProvidersRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DescribeCapacityProvidersRequest.Builder} to create a
* request.
* @return Result of the DescribeCapacityProviders operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeCapacityProviders
* @see AWS
* API Documentation
*/
default DescribeCapacityProvidersResponse describeCapacityProviders(
Consumer describeCapacityProvidersRequest) throws ServerException,
ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return describeCapacityProviders(DescribeCapacityProvidersRequest.builder()
.applyMutation(describeCapacityProvidersRequest).build());
}
/**
*
* Describes one or more of your clusters.
*
*
* @param describeClustersRequest
* @return Result of the DescribeClusters operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeClusters
* @see AWS API
* Documentation
*/
default DescribeClustersResponse describeClusters(DescribeClustersRequest describeClustersRequest) throws ServerException,
ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Describes one or more of your clusters.
*
*
*
* This is a convenience which creates an instance of the {@link DescribeClustersRequest.Builder} avoiding the need
* to create one manually via {@link DescribeClustersRequest#builder()}
*
*
* @param describeClustersRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DescribeClustersRequest.Builder} to create a request.
* @return Result of the DescribeClusters operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeClusters
* @see AWS API
* Documentation
*/
default DescribeClustersResponse describeClusters(Consumer describeClustersRequest)
throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException,
EcsException {
return describeClusters(DescribeClustersRequest.builder().applyMutation(describeClustersRequest).build());
}
/**
*
* Describes one or more of your clusters.
*
*
* @return Result of the DescribeClusters operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeClusters
* @see #describeClusters(DescribeClustersRequest)
* @see AWS API
* Documentation
*/
default DescribeClustersResponse describeClusters() throws ServerException, ClientException, InvalidParameterException,
AwsServiceException, SdkClientException, EcsException {
return describeClusters(DescribeClustersRequest.builder().build());
}
/**
*
* Describes one or more container instances. Returns metadata about each container instance requested.
*
*
* @param describeContainerInstancesRequest
* @return Result of the DescribeContainerInstances operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeContainerInstances
* @see AWS API Documentation
*/
default DescribeContainerInstancesResponse describeContainerInstances(
DescribeContainerInstancesRequest describeContainerInstancesRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Describes one or more container instances. Returns metadata about each container instance requested.
*
*
*
* This is a convenience which creates an instance of the {@link DescribeContainerInstancesRequest.Builder} avoiding
* the need to create one manually via {@link DescribeContainerInstancesRequest#builder()}
*
*
* @param describeContainerInstancesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DescribeContainerInstancesRequest.Builder} to create a
* request.
* @return Result of the DescribeContainerInstances operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeContainerInstances
* @see AWS API Documentation
*/
default DescribeContainerInstancesResponse describeContainerInstances(
Consumer describeContainerInstancesRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException,
EcsException {
return describeContainerInstances(DescribeContainerInstancesRequest.builder()
.applyMutation(describeContainerInstancesRequest).build());
}
/**
*
* Describes the specified services running in your cluster.
*
*
* @param describeServicesRequest
* @return Result of the DescribeServices operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeServices
* @see AWS API
* Documentation
*/
default DescribeServicesResponse describeServices(DescribeServicesRequest describeServicesRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Describes the specified services running in your cluster.
*
*
*
* This is a convenience which creates an instance of the {@link DescribeServicesRequest.Builder} avoiding the need
* to create one manually via {@link DescribeServicesRequest#builder()}
*
*
* @param describeServicesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DescribeServicesRequest.Builder} to create a request.
* @return Result of the DescribeServices operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeServices
* @see AWS API
* Documentation
*/
default DescribeServicesResponse describeServices(Consumer describeServicesRequest)
throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException,
SdkClientException, EcsException {
return describeServices(DescribeServicesRequest.builder().applyMutation(describeServicesRequest).build());
}
/**
*
* Describes a task definition. You can specify a family and revision to find information
* about a specific task definition, or you can simply specify the family to find the latest ACTIVE
* revision in that family.
*
*
*
* You can only describe INACTIVE task definitions while an active task or service references them.
*
*
*
* @param describeTaskDefinitionRequest
* @return Result of the DescribeTaskDefinition operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeTaskDefinition
* @see AWS
* API Documentation
*/
default DescribeTaskDefinitionResponse describeTaskDefinition(DescribeTaskDefinitionRequest describeTaskDefinitionRequest)
throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Describes a task definition. You can specify a family and revision to find information
* about a specific task definition, or you can simply specify the family to find the latest ACTIVE
* revision in that family.
*
*
*
* You can only describe INACTIVE task definitions while an active task or service references them.
*
*
*
* This is a convenience which creates an instance of the {@link DescribeTaskDefinitionRequest.Builder} avoiding the
* need to create one manually via {@link DescribeTaskDefinitionRequest#builder()}
*
*
* @param describeTaskDefinitionRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DescribeTaskDefinitionRequest.Builder} to create a
* request.
* @return Result of the DescribeTaskDefinition operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeTaskDefinition
* @see AWS
* API Documentation
*/
default DescribeTaskDefinitionResponse describeTaskDefinition(
Consumer describeTaskDefinitionRequest) throws ServerException,
ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return describeTaskDefinition(DescribeTaskDefinitionRequest.builder().applyMutation(describeTaskDefinitionRequest)
.build());
}
/**
*
* Describes the task sets in the specified cluster and service. This is used when a service uses the
* EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment
* Types in the Amazon Elastic Container Service Developer Guide.
*
*
* @param describeTaskSetsRequest
* @return Result of the DescribeTaskSets operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws ServiceNotActiveException
* The specified service isn't active. You can't update a service that's inactive. If you have previously
* deleted a service, you can re-create it with CreateService.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeTaskSets
* @see AWS API
* Documentation
*/
default DescribeTaskSetsResponse describeTaskSets(DescribeTaskSetsRequest describeTaskSetsRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException,
AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Describes the task sets in the specified cluster and service. This is used when a service uses the
* EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment
* Types in the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link DescribeTaskSetsRequest.Builder} avoiding the need
* to create one manually via {@link DescribeTaskSetsRequest#builder()}
*
*
* @param describeTaskSetsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DescribeTaskSetsRequest.Builder} to create a request.
* @return Result of the DescribeTaskSets operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws ServiceNotActiveException
* The specified service isn't active. You can't update a service that's inactive. If you have previously
* deleted a service, you can re-create it with CreateService.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeTaskSets
* @see AWS API
* Documentation
*/
default DescribeTaskSetsResponse describeTaskSets(Consumer describeTaskSetsRequest)
throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException,
UnsupportedFeatureException, AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException,
AwsServiceException, SdkClientException, EcsException {
return describeTaskSets(DescribeTaskSetsRequest.builder().applyMutation(describeTaskSetsRequest).build());
}
/**
*
* Describes a specified task or tasks.
*
*
* Currently, stopped tasks appear in the returned results for at least one hour.
*
*
* If you have tasks with tags, and then delete the cluster, the tagged tasks are returned in the response. If you
* create a new cluster with the same name as the deleted cluster, the tagged tasks are not included in the
* response.
*
*
* @param describeTasksRequest
* @return Result of the DescribeTasks operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeTasks
* @see AWS API
* Documentation
*/
default DescribeTasksResponse describeTasks(DescribeTasksRequest describeTasksRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Describes a specified task or tasks.
*
*
* Currently, stopped tasks appear in the returned results for at least one hour.
*
*
* If you have tasks with tags, and then delete the cluster, the tagged tasks are returned in the response. If you
* create a new cluster with the same name as the deleted cluster, the tagged tasks are not included in the
* response.
*
*
*
* This is a convenience which creates an instance of the {@link DescribeTasksRequest.Builder} avoiding the need to
* create one manually via {@link DescribeTasksRequest#builder()}
*
*
* @param describeTasksRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DescribeTasksRequest.Builder} to create a request.
* @return Result of the DescribeTasks operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DescribeTasks
* @see AWS API
* Documentation
*/
default DescribeTasksResponse describeTasks(Consumer describeTasksRequest)
throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException,
SdkClientException, EcsException {
return describeTasks(DescribeTasksRequest.builder().applyMutation(describeTasksRequest).build());
}
/**
*
*
* This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
*
*
*
* Returns an endpoint for the Amazon ECS agent to poll for updates.
*
*
* @param discoverPollEndpointRequest
* @return Result of the DiscoverPollEndpoint operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DiscoverPollEndpoint
* @see AWS API
* Documentation
*/
default DiscoverPollEndpointResponse discoverPollEndpoint(DiscoverPollEndpointRequest discoverPollEndpointRequest)
throws ServerException, ClientException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
*
* This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
*
*
*
* Returns an endpoint for the Amazon ECS agent to poll for updates.
*
*
*
* This is a convenience which creates an instance of the {@link DiscoverPollEndpointRequest.Builder} avoiding the
* need to create one manually via {@link DiscoverPollEndpointRequest#builder()}
*
*
* @param discoverPollEndpointRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.DiscoverPollEndpointRequest.Builder} to create a request.
* @return Result of the DiscoverPollEndpoint operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.DiscoverPollEndpoint
* @see AWS API
* Documentation
*/
default DiscoverPollEndpointResponse discoverPollEndpoint(
Consumer discoverPollEndpointRequest) throws ServerException, ClientException,
AwsServiceException, SdkClientException, EcsException {
return discoverPollEndpoint(DiscoverPollEndpointRequest.builder().applyMutation(discoverPollEndpointRequest).build());
}
/**
*
* Runs a command remotely on a container within a task.
*
*
* If you use a condition key in your IAM policy to refine the conditions for the policy statement, for example
* limit the actions to a specific cluster, you receive an AccessDeniedException when there is a
* mismatch between the condition key value and the corresponding parameter value.
*
*
* For information about required permissions and considerations, see Using Amazon ECS Exec for
* debugging in the Amazon ECS Developer Guide.
*
*
* @param executeCommandRequest
* @return Result of the ExecuteCommand operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws TargetNotConnectedException
* The execute command cannot run. This error can be caused by any of the following configuration
* issues:
*
* -
*
* Incorrect IAM permissions
*
*
* -
*
* The SSM agent is not installed or is not running
*
*
* -
*
* There is an interface Amazon VPC endpoint for Amazon ECS, but there is not one for Systems Manager
* Session Manager
*
*
*
*
* For information about how to troubleshoot the issues, see Troubleshooting issues
* with ECS Exec in the Amazon Elastic Container Service Developer Guide.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ExecuteCommand
* @see AWS API
* Documentation
*/
default ExecuteCommandResponse executeCommand(ExecuteCommandRequest executeCommandRequest) throws ServerException,
ClientException, InvalidParameterException, AccessDeniedException, ClusterNotFoundException,
TargetNotConnectedException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Runs a command remotely on a container within a task.
*
*
* If you use a condition key in your IAM policy to refine the conditions for the policy statement, for example
* limit the actions to a specific cluster, you receive an AccessDeniedException when there is a
* mismatch between the condition key value and the corresponding parameter value.
*
*
* For information about required permissions and considerations, see Using Amazon ECS Exec for
* debugging in the Amazon ECS Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link ExecuteCommandRequest.Builder} avoiding the need to
* create one manually via {@link ExecuteCommandRequest#builder()}
*
*
* @param executeCommandRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ExecuteCommandRequest.Builder} to create a request.
* @return Result of the ExecuteCommand operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws TargetNotConnectedException
* The execute command cannot run. This error can be caused by any of the following configuration
* issues:
*
* -
*
* Incorrect IAM permissions
*
*
* -
*
* The SSM agent is not installed or is not running
*
*
* -
*
* There is an interface Amazon VPC endpoint for Amazon ECS, but there is not one for Systems Manager
* Session Manager
*
*
*
*
* For information about how to troubleshoot the issues, see Troubleshooting issues
* with ECS Exec in the Amazon Elastic Container Service Developer Guide.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ExecuteCommand
* @see AWS API
* Documentation
*/
default ExecuteCommandResponse executeCommand(Consumer executeCommandRequest)
throws ServerException, ClientException, InvalidParameterException, AccessDeniedException, ClusterNotFoundException,
TargetNotConnectedException, AwsServiceException, SdkClientException, EcsException {
return executeCommand(ExecuteCommandRequest.builder().applyMutation(executeCommandRequest).build());
}
/**
*
* Retrieves the protection status of tasks in an Amazon ECS service.
*
*
* @param getTaskProtectionRequest
* @return Result of the GetTaskProtection operation returned by the service.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ResourceNotFoundException
* The specified resource wasn't found.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.GetTaskProtection
* @see AWS API
* Documentation
*/
default GetTaskProtectionResponse getTaskProtection(GetTaskProtectionRequest getTaskProtectionRequest)
throws AccessDeniedException, ClientException, ClusterNotFoundException, InvalidParameterException,
ResourceNotFoundException, ServerException, UnsupportedFeatureException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Retrieves the protection status of tasks in an Amazon ECS service.
*
*
*
* This is a convenience which creates an instance of the {@link GetTaskProtectionRequest.Builder} avoiding the need
* to create one manually via {@link GetTaskProtectionRequest#builder()}
*
*
* @param getTaskProtectionRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.GetTaskProtectionRequest.Builder} to create a request.
* @return Result of the GetTaskProtection operation returned by the service.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ResourceNotFoundException
* The specified resource wasn't found.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.GetTaskProtection
* @see AWS API
* Documentation
*/
default GetTaskProtectionResponse getTaskProtection(Consumer getTaskProtectionRequest)
throws AccessDeniedException, ClientException, ClusterNotFoundException, InvalidParameterException,
ResourceNotFoundException, ServerException, UnsupportedFeatureException, AwsServiceException, SdkClientException,
EcsException {
return getTaskProtection(GetTaskProtectionRequest.builder().applyMutation(getTaskProtectionRequest).build());
}
/**
*
* Lists the account settings for a specified principal.
*
*
* @param listAccountSettingsRequest
* @return Result of the ListAccountSettings operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListAccountSettings
* @see AWS API
* Documentation
*/
default ListAccountSettingsResponse listAccountSettings(ListAccountSettingsRequest listAccountSettingsRequest)
throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Lists the account settings for a specified principal.
*
*
*
* This is a convenience which creates an instance of the {@link ListAccountSettingsRequest.Builder} avoiding the
* need to create one manually via {@link ListAccountSettingsRequest#builder()}
*
*
* @param listAccountSettingsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest.Builder} to create a request.
* @return Result of the ListAccountSettings operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListAccountSettings
* @see AWS API
* Documentation
*/
default ListAccountSettingsResponse listAccountSettings(
Consumer listAccountSettingsRequest) throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return listAccountSettings(ListAccountSettingsRequest.builder().applyMutation(listAccountSettingsRequest).build());
}
/**
*
* Lists the account settings for a specified principal.
*
*
* @return Result of the ListAccountSettings operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListAccountSettings
* @see #listAccountSettings(ListAccountSettingsRequest)
* @see AWS API
* Documentation
*/
default ListAccountSettingsResponse listAccountSettings() throws ServerException, ClientException, InvalidParameterException,
AwsServiceException, SdkClientException, EcsException {
return listAccountSettings(ListAccountSettingsRequest.builder().build());
}
/**
*
* Lists the account settings for a specified principal.
*
*
*
* This is a variant of
* {@link #listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest)} operation. The
* return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
* making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client.listAccountSettingsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client
* .listAccountSettingsPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListAccountSettingsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client.listAccountSettingsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest)} operation.
*
*
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListAccountSettings
* @see #listAccountSettingsPaginator(ListAccountSettingsRequest)
* @see AWS API
* Documentation
*/
default ListAccountSettingsIterable listAccountSettingsPaginator() throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return listAccountSettingsPaginator(ListAccountSettingsRequest.builder().build());
}
/**
*
* Lists the account settings for a specified principal.
*
*
*
* This is a variant of
* {@link #listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest)} operation. The
* return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
* making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client.listAccountSettingsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client
* .listAccountSettingsPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListAccountSettingsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client.listAccountSettingsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest)} operation.
*
*
* @param listAccountSettingsRequest
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListAccountSettings
* @see AWS API
* Documentation
*/
default ListAccountSettingsIterable listAccountSettingsPaginator(ListAccountSettingsRequest listAccountSettingsRequest)
throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException,
EcsException {
return new ListAccountSettingsIterable(this, listAccountSettingsRequest);
}
/**
*
* Lists the account settings for a specified principal.
*
*
*
* This is a variant of
* {@link #listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest)} operation. The
* return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
* making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client.listAccountSettingsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client
* .listAccountSettingsPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListAccountSettingsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client.listAccountSettingsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest)} operation.
*
*
* This is a convenience which creates an instance of the {@link ListAccountSettingsRequest.Builder} avoiding the
* need to create one manually via {@link ListAccountSettingsRequest#builder()}
*
*
* @param listAccountSettingsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest.Builder} to create a request.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListAccountSettings
* @see AWS API
* Documentation
*/
default ListAccountSettingsIterable listAccountSettingsPaginator(
Consumer listAccountSettingsRequest) throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return listAccountSettingsPaginator(ListAccountSettingsRequest.builder().applyMutation(listAccountSettingsRequest)
.build());
}
/**
*
* Lists the attributes for Amazon ECS resources within a specified target type and cluster. When you specify a
* target type and cluster, ListAttributes returns a list of attribute objects, one for each attribute
* on each resource. You can filter the list of results to a single attribute name to only return results that have
* that name. You can also filter the results by attribute name and value. You can do this, for example, to see
* which container instances in a cluster are running a Linux AMI (ecs.os-type=linux).
*
*
* @param listAttributesRequest
* @return Result of the ListAttributes operation returned by the service.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListAttributes
* @see AWS API
* Documentation
*/
default ListAttributesResponse listAttributes(ListAttributesRequest listAttributesRequest) throws ClusterNotFoundException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Lists the attributes for Amazon ECS resources within a specified target type and cluster. When you specify a
* target type and cluster, ListAttributes returns a list of attribute objects, one for each attribute
* on each resource. You can filter the list of results to a single attribute name to only return results that have
* that name. You can also filter the results by attribute name and value. You can do this, for example, to see
* which container instances in a cluster are running a Linux AMI (ecs.os-type=linux).
*
*
*
* This is a convenience which creates an instance of the {@link ListAttributesRequest.Builder} avoiding the need to
* create one manually via {@link ListAttributesRequest#builder()}
*
*
* @param listAttributesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListAttributesRequest.Builder} to create a request.
* @return Result of the ListAttributes operation returned by the service.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListAttributes
* @see AWS API
* Documentation
*/
default ListAttributesResponse listAttributes(Consumer listAttributesRequest)
throws ClusterNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return listAttributes(ListAttributesRequest.builder().applyMutation(listAttributesRequest).build());
}
/**
*
* Lists the attributes for Amazon ECS resources within a specified target type and cluster. When you specify a
* target type and cluster, ListAttributes returns a list of attribute objects, one for each attribute
* on each resource. You can filter the list of results to a single attribute name to only return results that have
* that name. You can also filter the results by attribute name and value. You can do this, for example, to see
* which container instances in a cluster are running a Linux AMI (ecs.os-type=linux).
*
*
*
* This is a variant of {@link #listAttributes(software.amazon.awssdk.services.ecs.model.ListAttributesRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListAttributesIterable responses = client.listAttributesPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListAttributesIterable responses = client.listAttributesPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListAttributesResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListAttributesIterable responses = client.listAttributesPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listAttributes(software.amazon.awssdk.services.ecs.model.ListAttributesRequest)} operation.
*
*
* @param listAttributesRequest
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListAttributes
* @see AWS API
* Documentation
*/
default ListAttributesIterable listAttributesPaginator(ListAttributesRequest listAttributesRequest)
throws ClusterNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return new ListAttributesIterable(this, listAttributesRequest);
}
/**
*
* Lists the attributes for Amazon ECS resources within a specified target type and cluster. When you specify a
* target type and cluster, ListAttributes returns a list of attribute objects, one for each attribute
* on each resource. You can filter the list of results to a single attribute name to only return results that have
* that name. You can also filter the results by attribute name and value. You can do this, for example, to see
* which container instances in a cluster are running a Linux AMI (ecs.os-type=linux).
*
*
*
* This is a variant of {@link #listAttributes(software.amazon.awssdk.services.ecs.model.ListAttributesRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListAttributesIterable responses = client.listAttributesPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListAttributesIterable responses = client.listAttributesPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListAttributesResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListAttributesIterable responses = client.listAttributesPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listAttributes(software.amazon.awssdk.services.ecs.model.ListAttributesRequest)} operation.
*
*
* This is a convenience which creates an instance of the {@link ListAttributesRequest.Builder} avoiding the need to
* create one manually via {@link ListAttributesRequest#builder()}
*
*
* @param listAttributesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListAttributesRequest.Builder} to create a request.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListAttributes
* @see AWS API
* Documentation
*/
default ListAttributesIterable listAttributesPaginator(Consumer listAttributesRequest)
throws ClusterNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return listAttributesPaginator(ListAttributesRequest.builder().applyMutation(listAttributesRequest).build());
}
/**
*
* Returns a list of existing clusters.
*
*
* @param listClustersRequest
* @return Result of the ListClusters operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListClusters
* @see AWS API
* Documentation
*/
default ListClustersResponse listClusters(ListClustersRequest listClustersRequest) throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Returns a list of existing clusters.
*
*
*
* This is a convenience which creates an instance of the {@link ListClustersRequest.Builder} avoiding the need to
* create one manually via {@link ListClustersRequest#builder()}
*
*
* @param listClustersRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListClustersRequest.Builder} to create a request.
* @return Result of the ListClusters operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListClusters
* @see AWS API
* Documentation
*/
default ListClustersResponse listClusters(Consumer listClustersRequest) throws ServerException,
ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return listClusters(ListClustersRequest.builder().applyMutation(listClustersRequest).build());
}
/**
*
* Returns a list of existing clusters.
*
*
* @return Result of the ListClusters operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListClusters
* @see #listClusters(ListClustersRequest)
* @see AWS API
* Documentation
*/
default ListClustersResponse listClusters() throws ServerException, ClientException, InvalidParameterException,
AwsServiceException, SdkClientException, EcsException {
return listClusters(ListClustersRequest.builder().build());
}
/**
*
* Returns a list of existing clusters.
*
*
*
* This is a variant of {@link #listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListClustersResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest)} operation.
*
*
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListClusters
* @see #listClustersPaginator(ListClustersRequest)
* @see AWS API
* Documentation
*/
default ListClustersIterable listClustersPaginator() throws ServerException, ClientException, InvalidParameterException,
AwsServiceException, SdkClientException, EcsException {
return listClustersPaginator(ListClustersRequest.builder().build());
}
/**
*
* Returns a list of existing clusters.
*
*
*
* This is a variant of {@link #listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListClustersResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest)} operation.
*
*
* @param listClustersRequest
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListClusters
* @see AWS API
* Documentation
*/
default ListClustersIterable listClustersPaginator(ListClustersRequest listClustersRequest) throws ServerException,
ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return new ListClustersIterable(this, listClustersRequest);
}
/**
*
* Returns a list of existing clusters.
*
*
*
* This is a variant of {@link #listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListClustersResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest)} operation.
*
*
* This is a convenience which creates an instance of the {@link ListClustersRequest.Builder} avoiding the need to
* create one manually via {@link ListClustersRequest#builder()}
*
*
* @param listClustersRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListClustersRequest.Builder} to create a request.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListClusters
* @see AWS API
* Documentation
*/
default ListClustersIterable listClustersPaginator(Consumer listClustersRequest)
throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException,
EcsException {
return listClustersPaginator(ListClustersRequest.builder().applyMutation(listClustersRequest).build());
}
/**
*
* Returns a list of container instances in a specified cluster. You can filter the results of a
* ListContainerInstances operation with cluster query language statements inside the
* filter parameter. For more information, see Cluster Query
* Language in the Amazon Elastic Container Service Developer Guide.
*
*
* @param listContainerInstancesRequest
* @return Result of the ListContainerInstances operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListContainerInstances
* @see AWS
* API Documentation
*/
default ListContainerInstancesResponse listContainerInstances(ListContainerInstancesRequest listContainerInstancesRequest)
throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Returns a list of container instances in a specified cluster. You can filter the results of a
* ListContainerInstances operation with cluster query language statements inside the
* filter parameter. For more information, see Cluster Query
* Language in the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link ListContainerInstancesRequest.Builder} avoiding the
* need to create one manually via {@link ListContainerInstancesRequest#builder()}
*
*
* @param listContainerInstancesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest.Builder} to create a
* request.
* @return Result of the ListContainerInstances operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListContainerInstances
* @see AWS
* API Documentation
*/
default ListContainerInstancesResponse listContainerInstances(
Consumer listContainerInstancesRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException,
EcsException {
return listContainerInstances(ListContainerInstancesRequest.builder().applyMutation(listContainerInstancesRequest)
.build());
}
/**
*
* Returns a list of container instances in a specified cluster. You can filter the results of a
* ListContainerInstances operation with cluster query language statements inside the
* filter parameter. For more information, see Cluster Query
* Language in the Amazon Elastic Container Service Developer Guide.
*
*
* @return Result of the ListContainerInstances operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListContainerInstances
* @see #listContainerInstances(ListContainerInstancesRequest)
* @see AWS
* API Documentation
*/
default ListContainerInstancesResponse listContainerInstances() throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException {
return listContainerInstances(ListContainerInstancesRequest.builder().build());
}
/**
*
* Returns a list of container instances in a specified cluster. You can filter the results of a
* ListContainerInstances operation with cluster query language statements inside the
* filter parameter. For more information, see Cluster Query
* Language in the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a variant of
* {@link #listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client.listContainerInstancesPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client
* .listContainerInstancesPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListContainerInstancesResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client.listContainerInstancesPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest)}
* operation.
*
*
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListContainerInstances
* @see #listContainerInstancesPaginator(ListContainerInstancesRequest)
* @see AWS
* API Documentation
*/
default ListContainerInstancesIterable listContainerInstancesPaginator() throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException {
return listContainerInstancesPaginator(ListContainerInstancesRequest.builder().build());
}
/**
*
* Returns a list of container instances in a specified cluster. You can filter the results of a
* ListContainerInstances operation with cluster query language statements inside the
* filter parameter. For more information, see Cluster Query
* Language in the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a variant of
* {@link #listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client.listContainerInstancesPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client
* .listContainerInstancesPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListContainerInstancesResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client.listContainerInstancesPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest)}
* operation.
*
*
* @param listContainerInstancesRequest
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListContainerInstances
* @see AWS
* API Documentation
*/
default ListContainerInstancesIterable listContainerInstancesPaginator(
ListContainerInstancesRequest listContainerInstancesRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException {
return new ListContainerInstancesIterable(this, listContainerInstancesRequest);
}
/**
*
* Returns a list of container instances in a specified cluster. You can filter the results of a
* ListContainerInstances operation with cluster query language statements inside the
* filter parameter. For more information, see Cluster Query
* Language in the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a variant of
* {@link #listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client.listContainerInstancesPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client
* .listContainerInstancesPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListContainerInstancesResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client.listContainerInstancesPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest)}
* operation.
*
*
* This is a convenience which creates an instance of the {@link ListContainerInstancesRequest.Builder} avoiding the
* need to create one manually via {@link ListContainerInstancesRequest#builder()}
*
*
* @param listContainerInstancesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest.Builder} to create a
* request.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListContainerInstances
* @see AWS
* API Documentation
*/
default ListContainerInstancesIterable listContainerInstancesPaginator(
Consumer listContainerInstancesRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException,
EcsException {
return listContainerInstancesPaginator(ListContainerInstancesRequest.builder()
.applyMutation(listContainerInstancesRequest).build());
}
/**
*
* Returns a list of services. You can filter the results by cluster, launch type, and scheduling strategy.
*
*
* @param listServicesRequest
* @return Result of the ListServices operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListServices
* @see AWS API
* Documentation
*/
default ListServicesResponse listServices(ListServicesRequest listServicesRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Returns a list of services. You can filter the results by cluster, launch type, and scheduling strategy.
*
*
*
* This is a convenience which creates an instance of the {@link ListServicesRequest.Builder} avoiding the need to
* create one manually via {@link ListServicesRequest#builder()}
*
*
* @param listServicesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListServicesRequest.Builder} to create a request.
* @return Result of the ListServices operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListServices
* @see AWS API
* Documentation
*/
default ListServicesResponse listServices(Consumer listServicesRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException,
EcsException {
return listServices(ListServicesRequest.builder().applyMutation(listServicesRequest).build());
}
/**
*
* Returns a list of services. You can filter the results by cluster, launch type, and scheduling strategy.
*
*
* @return Result of the ListServices operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListServices
* @see #listServices(ListServicesRequest)
* @see AWS API
* Documentation
*/
default ListServicesResponse listServices() throws ServerException, ClientException, InvalidParameterException,
ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException {
return listServices(ListServicesRequest.builder().build());
}
/**
*
* Returns a list of services. You can filter the results by cluster, launch type, and scheduling strategy.
*
*
*
* This is a variant of {@link #listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListServicesResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest)} operation.
*
*
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListServices
* @see #listServicesPaginator(ListServicesRequest)
* @see AWS API
* Documentation
*/
default ListServicesIterable listServicesPaginator() throws ServerException, ClientException, InvalidParameterException,
ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException {
return listServicesPaginator(ListServicesRequest.builder().build());
}
/**
*
* Returns a list of services. You can filter the results by cluster, launch type, and scheduling strategy.
*
*
*
* This is a variant of {@link #listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListServicesResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest)} operation.
*
*
* @param listServicesRequest
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListServices
* @see AWS API
* Documentation
*/
default ListServicesIterable listServicesPaginator(ListServicesRequest listServicesRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException,
EcsException {
return new ListServicesIterable(this, listServicesRequest);
}
/**
*
* Returns a list of services. You can filter the results by cluster, launch type, and scheduling strategy.
*
*
*
* This is a variant of {@link #listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListServicesResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest)} operation.
*
*
* This is a convenience which creates an instance of the {@link ListServicesRequest.Builder} avoiding the need to
* create one manually via {@link ListServicesRequest#builder()}
*
*
* @param listServicesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListServicesRequest.Builder} to create a request.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListServices
* @see AWS API
* Documentation
*/
default ListServicesIterable listServicesPaginator(Consumer listServicesRequest)
throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException,
SdkClientException, EcsException {
return listServicesPaginator(ListServicesRequest.builder().applyMutation(listServicesRequest).build());
}
/**
*
* This operation lists all of the services that are associated with a Cloud Map namespace. This list might include
* services in different clusters. In contrast, ListServices can only list services in one cluster at a
* time. If you need to filter the list of services in a single cluster by various parameters, use
* ListServices. For more information, see Service Connect in
* the Amazon Elastic Container Service Developer Guide.
*
*
* @param listServicesByNamespaceRequest
* @return Result of the ListServicesByNamespace operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListServicesByNamespace
* @see AWS
* API Documentation
*/
default ListServicesByNamespaceResponse listServicesByNamespace(ListServicesByNamespaceRequest listServicesByNamespaceRequest)
throws ServerException, ClientException, InvalidParameterException, NamespaceNotFoundException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* This operation lists all of the services that are associated with a Cloud Map namespace. This list might include
* services in different clusters. In contrast, ListServices can only list services in one cluster at a
* time. If you need to filter the list of services in a single cluster by various parameters, use
* ListServices. For more information, see Service Connect in
* the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link ListServicesByNamespaceRequest.Builder} avoiding
* the need to create one manually via {@link ListServicesByNamespaceRequest#builder()}
*
*
* @param listServicesByNamespaceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceRequest.Builder} to create a
* request.
* @return Result of the ListServicesByNamespace operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListServicesByNamespace
* @see AWS
* API Documentation
*/
default ListServicesByNamespaceResponse listServicesByNamespace(
Consumer listServicesByNamespaceRequest) throws ServerException,
ClientException, InvalidParameterException, NamespaceNotFoundException, AwsServiceException, SdkClientException,
EcsException {
return listServicesByNamespace(ListServicesByNamespaceRequest.builder().applyMutation(listServicesByNamespaceRequest)
.build());
}
/**
*
* This operation lists all of the services that are associated with a Cloud Map namespace. This list might include
* services in different clusters. In contrast, ListServices can only list services in one cluster at a
* time. If you need to filter the list of services in a single cluster by various parameters, use
* ListServices. For more information, see Service Connect in
* the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a variant of
* {@link #listServicesByNamespace(software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListServicesByNamespaceIterable responses = client.listServicesByNamespacePaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListServicesByNamespaceIterable responses = client
* .listServicesByNamespacePaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListServicesByNamespaceIterable responses = client.listServicesByNamespacePaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listServicesByNamespace(software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceRequest)}
* operation.
*
*
* @param listServicesByNamespaceRequest
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListServicesByNamespace
* @see AWS
* API Documentation
*/
default ListServicesByNamespaceIterable listServicesByNamespacePaginator(
ListServicesByNamespaceRequest listServicesByNamespaceRequest) throws ServerException, ClientException,
InvalidParameterException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException {
return new ListServicesByNamespaceIterable(this, listServicesByNamespaceRequest);
}
/**
*
* This operation lists all of the services that are associated with a Cloud Map namespace. This list might include
* services in different clusters. In contrast, ListServices can only list services in one cluster at a
* time. If you need to filter the list of services in a single cluster by various parameters, use
* ListServices. For more information, see Service Connect in
* the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a variant of
* {@link #listServicesByNamespace(software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListServicesByNamespaceIterable responses = client.listServicesByNamespacePaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListServicesByNamespaceIterable responses = client
* .listServicesByNamespacePaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListServicesByNamespaceIterable responses = client.listServicesByNamespacePaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listServicesByNamespace(software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceRequest)}
* operation.
*
*
* This is a convenience which creates an instance of the {@link ListServicesByNamespaceRequest.Builder} avoiding
* the need to create one manually via {@link ListServicesByNamespaceRequest#builder()}
*
*
* @param listServicesByNamespaceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceRequest.Builder} to create a
* request.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListServicesByNamespace
* @see AWS
* API Documentation
*/
default ListServicesByNamespaceIterable listServicesByNamespacePaginator(
Consumer listServicesByNamespaceRequest) throws ServerException,
ClientException, InvalidParameterException, NamespaceNotFoundException, AwsServiceException, SdkClientException,
EcsException {
return listServicesByNamespacePaginator(ListServicesByNamespaceRequest.builder()
.applyMutation(listServicesByNamespaceRequest).build());
}
/**
*
* List the tags for an Amazon ECS resource.
*
*
* @param listTagsForResourceRequest
* @return Result of the ListTagsForResource operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTagsForResource
* @see AWS API
* Documentation
*/
default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
throws ServerException, ClientException, ClusterNotFoundException, InvalidParameterException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* List the tags for an Amazon ECS resource.
*
*
*
* This is a convenience which creates an instance of the {@link ListTagsForResourceRequest.Builder} avoiding the
* need to create one manually via {@link ListTagsForResourceRequest#builder()}
*
*
* @param listTagsForResourceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListTagsForResourceRequest.Builder} to create a request.
* @return Result of the ListTagsForResource operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTagsForResource
* @see AWS API
* Documentation
*/
default ListTagsForResourceResponse listTagsForResource(
Consumer listTagsForResourceRequest) throws ServerException, ClientException,
ClusterNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return listTagsForResource(ListTagsForResourceRequest.builder().applyMutation(listTagsForResourceRequest).build());
}
/**
*
* Returns a list of task definition families that are registered to your account. This list includes task
* definition families that no longer have any ACTIVE task definition revisions.
*
*
* You can filter out task definition families that don't contain any ACTIVE task definition revisions
* by setting the status parameter to ACTIVE. You can also filter the results with the
* familyPrefix parameter.
*
*
* @param listTaskDefinitionFamiliesRequest
* @return Result of the ListTaskDefinitionFamilies operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTaskDefinitionFamilies
* @see AWS API Documentation
*/
default ListTaskDefinitionFamiliesResponse listTaskDefinitionFamilies(
ListTaskDefinitionFamiliesRequest listTaskDefinitionFamiliesRequest) throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Returns a list of task definition families that are registered to your account. This list includes task
* definition families that no longer have any ACTIVE task definition revisions.
*
*
* You can filter out task definition families that don't contain any ACTIVE task definition revisions
* by setting the status parameter to ACTIVE. You can also filter the results with the
* familyPrefix parameter.
*
*
*
* This is a convenience which creates an instance of the {@link ListTaskDefinitionFamiliesRequest.Builder} avoiding
* the need to create one manually via {@link ListTaskDefinitionFamiliesRequest#builder()}
*
*
* @param listTaskDefinitionFamiliesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest.Builder} to create a
* request.
* @return Result of the ListTaskDefinitionFamilies operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTaskDefinitionFamilies
* @see AWS API Documentation
*/
default ListTaskDefinitionFamiliesResponse listTaskDefinitionFamilies(
Consumer listTaskDefinitionFamiliesRequest) throws ServerException,
ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return listTaskDefinitionFamilies(ListTaskDefinitionFamiliesRequest.builder()
.applyMutation(listTaskDefinitionFamiliesRequest).build());
}
/**
*
* Returns a list of task definition families that are registered to your account. This list includes task
* definition families that no longer have any ACTIVE task definition revisions.
*
*
* You can filter out task definition families that don't contain any ACTIVE task definition revisions
* by setting the status parameter to ACTIVE. You can also filter the results with the
* familyPrefix parameter.
*
*
* @return Result of the ListTaskDefinitionFamilies operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTaskDefinitionFamilies
* @see #listTaskDefinitionFamilies(ListTaskDefinitionFamiliesRequest)
* @see AWS API Documentation
*/
default ListTaskDefinitionFamiliesResponse listTaskDefinitionFamilies() throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return listTaskDefinitionFamilies(ListTaskDefinitionFamiliesRequest.builder().build());
}
/**
*
* Returns a list of task definition families that are registered to your account. This list includes task
* definition families that no longer have any ACTIVE task definition revisions.
*
*
* You can filter out task definition families that don't contain any ACTIVE task definition revisions
* by setting the status parameter to ACTIVE. You can also filter the results with the
* familyPrefix parameter.
*
*
*
* This is a variant of
* {@link #listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client.listTaskDefinitionFamiliesPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client
* .listTaskDefinitionFamiliesPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client.listTaskDefinitionFamiliesPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest)}
* operation.
*
*
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTaskDefinitionFamilies
* @see #listTaskDefinitionFamiliesPaginator(ListTaskDefinitionFamiliesRequest)
* @see AWS API Documentation
*/
default ListTaskDefinitionFamiliesIterable listTaskDefinitionFamiliesPaginator() throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return listTaskDefinitionFamiliesPaginator(ListTaskDefinitionFamiliesRequest.builder().build());
}
/**
*
* Returns a list of task definition families that are registered to your account. This list includes task
* definition families that no longer have any ACTIVE task definition revisions.
*
*
* You can filter out task definition families that don't contain any ACTIVE task definition revisions
* by setting the status parameter to ACTIVE. You can also filter the results with the
* familyPrefix parameter.
*
*
*
* This is a variant of
* {@link #listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client.listTaskDefinitionFamiliesPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client
* .listTaskDefinitionFamiliesPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client.listTaskDefinitionFamiliesPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest)}
* operation.
*
*
* @param listTaskDefinitionFamiliesRequest
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTaskDefinitionFamilies
* @see AWS API Documentation
*/
default ListTaskDefinitionFamiliesIterable listTaskDefinitionFamiliesPaginator(
ListTaskDefinitionFamiliesRequest listTaskDefinitionFamiliesRequest) throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return new ListTaskDefinitionFamiliesIterable(this, listTaskDefinitionFamiliesRequest);
}
/**
*
* Returns a list of task definition families that are registered to your account. This list includes task
* definition families that no longer have any ACTIVE task definition revisions.
*
*
* You can filter out task definition families that don't contain any ACTIVE task definition revisions
* by setting the status parameter to ACTIVE. You can also filter the results with the
* familyPrefix parameter.
*
*
*
* This is a variant of
* {@link #listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client.listTaskDefinitionFamiliesPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client
* .listTaskDefinitionFamiliesPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client.listTaskDefinitionFamiliesPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest)}
* operation.
*
*
* This is a convenience which creates an instance of the {@link ListTaskDefinitionFamiliesRequest.Builder} avoiding
* the need to create one manually via {@link ListTaskDefinitionFamiliesRequest#builder()}
*
*
* @param listTaskDefinitionFamiliesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest.Builder} to create a
* request.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTaskDefinitionFamilies
* @see AWS API Documentation
*/
default ListTaskDefinitionFamiliesIterable listTaskDefinitionFamiliesPaginator(
Consumer listTaskDefinitionFamiliesRequest) throws ServerException,
ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return listTaskDefinitionFamiliesPaginator(ListTaskDefinitionFamiliesRequest.builder()
.applyMutation(listTaskDefinitionFamiliesRequest).build());
}
/**
*
* Returns a list of task definitions that are registered to your account. You can filter the results by family name
* with the familyPrefix parameter or by status with the status parameter.
*
*
* @param listTaskDefinitionsRequest
* @return Result of the ListTaskDefinitions operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTaskDefinitions
* @see AWS API
* Documentation
*/
default ListTaskDefinitionsResponse listTaskDefinitions(ListTaskDefinitionsRequest listTaskDefinitionsRequest)
throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Returns a list of task definitions that are registered to your account. You can filter the results by family name
* with the familyPrefix parameter or by status with the status parameter.
*
*
*
* This is a convenience which creates an instance of the {@link ListTaskDefinitionsRequest.Builder} avoiding the
* need to create one manually via {@link ListTaskDefinitionsRequest#builder()}
*
*
* @param listTaskDefinitionsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest.Builder} to create a request.
* @return Result of the ListTaskDefinitions operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTaskDefinitions
* @see AWS API
* Documentation
*/
default ListTaskDefinitionsResponse listTaskDefinitions(
Consumer listTaskDefinitionsRequest) throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return listTaskDefinitions(ListTaskDefinitionsRequest.builder().applyMutation(listTaskDefinitionsRequest).build());
}
/**
*
* Returns a list of task definitions that are registered to your account. You can filter the results by family name
* with the familyPrefix parameter or by status with the status parameter.
*
*
* @return Result of the ListTaskDefinitions operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTaskDefinitions
* @see #listTaskDefinitions(ListTaskDefinitionsRequest)
* @see AWS API
* Documentation
*/
default ListTaskDefinitionsResponse listTaskDefinitions() throws ServerException, ClientException, InvalidParameterException,
AwsServiceException, SdkClientException, EcsException {
return listTaskDefinitions(ListTaskDefinitionsRequest.builder().build());
}
/**
*
* Returns a list of task definitions that are registered to your account. You can filter the results by family name
* with the familyPrefix parameter or by status with the status parameter.
*
*
*
* This is a variant of
* {@link #listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest)} operation. The
* return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
* making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client.listTaskDefinitionsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client
* .listTaskDefinitionsPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client.listTaskDefinitionsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest)} operation.
*
*
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTaskDefinitions
* @see #listTaskDefinitionsPaginator(ListTaskDefinitionsRequest)
* @see AWS API
* Documentation
*/
default ListTaskDefinitionsIterable listTaskDefinitionsPaginator() throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return listTaskDefinitionsPaginator(ListTaskDefinitionsRequest.builder().build());
}
/**
*
* Returns a list of task definitions that are registered to your account. You can filter the results by family name
* with the familyPrefix parameter or by status with the status parameter.
*
*
*
* This is a variant of
* {@link #listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest)} operation. The
* return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
* making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client.listTaskDefinitionsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client
* .listTaskDefinitionsPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client.listTaskDefinitionsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest)} operation.
*
*
* @param listTaskDefinitionsRequest
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTaskDefinitions
* @see AWS API
* Documentation
*/
default ListTaskDefinitionsIterable listTaskDefinitionsPaginator(ListTaskDefinitionsRequest listTaskDefinitionsRequest)
throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException,
EcsException {
return new ListTaskDefinitionsIterable(this, listTaskDefinitionsRequest);
}
/**
*
* Returns a list of task definitions that are registered to your account. You can filter the results by family name
* with the familyPrefix parameter or by status with the status parameter.
*
*
*
* This is a variant of
* {@link #listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest)} operation. The
* return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
* making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client.listTaskDefinitionsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client
* .listTaskDefinitionsPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client.listTaskDefinitionsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest)} operation.
*
*
* This is a convenience which creates an instance of the {@link ListTaskDefinitionsRequest.Builder} avoiding the
* need to create one manually via {@link ListTaskDefinitionsRequest#builder()}
*
*
* @param listTaskDefinitionsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest.Builder} to create a request.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTaskDefinitions
* @see AWS API
* Documentation
*/
default ListTaskDefinitionsIterable listTaskDefinitionsPaginator(
Consumer listTaskDefinitionsRequest) throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return listTaskDefinitionsPaginator(ListTaskDefinitionsRequest.builder().applyMutation(listTaskDefinitionsRequest)
.build());
}
/**
*
* Returns a list of tasks. You can filter the results by cluster, task definition family, container instance,
* launch type, what IAM principal started the task, or by the desired status of the task.
*
*
* Recently stopped tasks might appear in the returned results.
*
*
* @param listTasksRequest
* @return Result of the ListTasks operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTasks
* @see AWS API
* Documentation
*/
default ListTasksResponse listTasks(ListTasksRequest listTasksRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Returns a list of tasks. You can filter the results by cluster, task definition family, container instance,
* launch type, what IAM principal started the task, or by the desired status of the task.
*
*
* Recently stopped tasks might appear in the returned results.
*
*
*
* This is a convenience which creates an instance of the {@link ListTasksRequest.Builder} avoiding the need to
* create one manually via {@link ListTasksRequest#builder()}
*
*
* @param listTasksRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListTasksRequest.Builder} to create a request.
* @return Result of the ListTasks operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTasks
* @see AWS API
* Documentation
*/
default ListTasksResponse listTasks(Consumer listTasksRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, AwsServiceException,
SdkClientException, EcsException {
return listTasks(ListTasksRequest.builder().applyMutation(listTasksRequest).build());
}
/**
*
* Returns a list of tasks. You can filter the results by cluster, task definition family, container instance,
* launch type, what IAM principal started the task, or by the desired status of the task.
*
*
* Recently stopped tasks might appear in the returned results.
*
*
* @return Result of the ListTasks operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTasks
* @see #listTasks(ListTasksRequest)
* @see AWS API
* Documentation
*/
default ListTasksResponse listTasks() throws ServerException, ClientException, InvalidParameterException,
ClusterNotFoundException, ServiceNotFoundException, AwsServiceException, SdkClientException, EcsException {
return listTasks(ListTasksRequest.builder().build());
}
/**
*
* Returns a list of tasks. You can filter the results by cluster, task definition family, container instance,
* launch type, what IAM principal started the task, or by the desired status of the task.
*
*
* Recently stopped tasks might appear in the returned results.
*
*
*
* This is a variant of {@link #listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest)} operation.
* The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
* handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListTasksResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest)} operation.
*
*
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTasks
* @see #listTasksPaginator(ListTasksRequest)
* @see AWS API
* Documentation
*/
default ListTasksIterable listTasksPaginator() throws ServerException, ClientException, InvalidParameterException,
ClusterNotFoundException, ServiceNotFoundException, AwsServiceException, SdkClientException, EcsException {
return listTasksPaginator(ListTasksRequest.builder().build());
}
/**
*
* Returns a list of tasks. You can filter the results by cluster, task definition family, container instance,
* launch type, what IAM principal started the task, or by the desired status of the task.
*
*
* Recently stopped tasks might appear in the returned results.
*
*
*
* This is a variant of {@link #listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest)} operation.
* The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
* handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListTasksResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest)} operation.
*
*
* @param listTasksRequest
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTasks
* @see AWS API
* Documentation
*/
default ListTasksIterable listTasksPaginator(ListTasksRequest listTasksRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, AwsServiceException,
SdkClientException, EcsException {
return new ListTasksIterable(this, listTasksRequest);
}
/**
*
* Returns a list of tasks. You can filter the results by cluster, task definition family, container instance,
* launch type, what IAM principal started the task, or by the desired status of the task.
*
*
* Recently stopped tasks might appear in the returned results.
*
*
*
* This is a variant of {@link #listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest)} operation.
* The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
* handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request);
* for (software.amazon.awssdk.services.ecs.model.ListTasksResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of maxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest)} operation.
*
*
* This is a convenience which creates an instance of the {@link ListTasksRequest.Builder} avoiding the need to
* create one manually via {@link ListTasksRequest#builder()}
*
*
* @param listTasksRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.ListTasksRequest.Builder} to create a request.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.ListTasks
* @see AWS API
* Documentation
*/
default ListTasksIterable listTasksPaginator(Consumer listTasksRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, AwsServiceException,
SdkClientException, EcsException {
return listTasksPaginator(ListTasksRequest.builder().applyMutation(listTasksRequest).build());
}
/**
*
* Modifies an account setting. Account settings are set on a per-Region basis.
*
*
* If you change the root user account setting, the default settings are reset for users and roles that do not have
* specified individual account settings. For more information, see Account Settings
* in the Amazon Elastic Container Service Developer Guide.
*
*
* When you specify serviceLongArnFormat, taskLongArnFormat, or
* containerInstanceLongArnFormat, the Amazon Resource Name (ARN) and resource ID format of the
* resource type for a specified user, role, or the root user for an account is affected. The opt-in and opt-out
* account setting must be set for each Amazon ECS resource separately. The ARN and resource ID format of a resource
* is defined by the opt-in status of the user or role that created the resource. You must turn on this setting to
* use Amazon ECS features such as resource tagging.
*
*
* When you specify awsvpcTrunking, the elastic network interface (ENI) limit for any new container
* instances that support the feature is changed. If awsvpcTrunking is turned on, any new container
* instances that support the feature are launched have the increased ENI limits available to them. For more
* information, see Elastic Network
* Interface Trunking in the Amazon Elastic Container Service Developer Guide.
*
*
* When you specify containerInsights, the default setting indicating whether Amazon Web Services
* CloudWatch Container Insights is turned on for your clusters is changed. If containerInsights is
* turned on, any new clusters that are created will have Container Insights turned on unless you disable it during
* cluster creation. For more information, see CloudWatch
* Container Insights in the Amazon Elastic Container Service Developer Guide.
*
*
* Amazon ECS is introducing tagging authorization for resource creation. Users must have permissions for actions
* that create the resource, such as ecsCreateCluster. If tags are specified when you create a
* resource, Amazon Web Services performs additional authorization to verify if users or roles have permissions to
* create tags. Therefore, you must grant explicit permissions to use the ecs:TagResource action. For
* more information, see Grant
* permission to tag resources on creation in the Amazon ECS Developer Guide.
*
*
* When Amazon Web Services determines that a security or infrastructure update is needed for an Amazon ECS task
* hosted on Fargate, the tasks need to be stopped and new tasks launched to replace them. Use
* fargateTaskRetirementWaitPeriod to configure the wait time to retire a Fargate task. For information
* about the Fargate tasks maintenance, see Amazon Web Services
* Fargate task maintenance in the Amazon ECS Developer Guide.
*
*
* The guardDutyActivate parameter is read-only in Amazon ECS and indicates whether Amazon ECS Runtime
* Monitoring is enabled or disabled by your security administrator in your Amazon ECS account. Amazon GuardDuty
* controls this account setting on your behalf. For more information, see Protecting
* Amazon ECS workloads with Amazon ECS Runtime Monitoring.
*
*
* @param putAccountSettingRequest
* @return Result of the PutAccountSetting operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.PutAccountSetting
* @see AWS API
* Documentation
*/
default PutAccountSettingResponse putAccountSetting(PutAccountSettingRequest putAccountSettingRequest)
throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Modifies an account setting. Account settings are set on a per-Region basis.
*
*
* If you change the root user account setting, the default settings are reset for users and roles that do not have
* specified individual account settings. For more information, see Account Settings
* in the Amazon Elastic Container Service Developer Guide.
*
*
* When you specify serviceLongArnFormat, taskLongArnFormat, or
* containerInstanceLongArnFormat, the Amazon Resource Name (ARN) and resource ID format of the
* resource type for a specified user, role, or the root user for an account is affected. The opt-in and opt-out
* account setting must be set for each Amazon ECS resource separately. The ARN and resource ID format of a resource
* is defined by the opt-in status of the user or role that created the resource. You must turn on this setting to
* use Amazon ECS features such as resource tagging.
*
*
* When you specify awsvpcTrunking, the elastic network interface (ENI) limit for any new container
* instances that support the feature is changed. If awsvpcTrunking is turned on, any new container
* instances that support the feature are launched have the increased ENI limits available to them. For more
* information, see Elastic Network
* Interface Trunking in the Amazon Elastic Container Service Developer Guide.
*
*
* When you specify containerInsights, the default setting indicating whether Amazon Web Services
* CloudWatch Container Insights is turned on for your clusters is changed. If containerInsights is
* turned on, any new clusters that are created will have Container Insights turned on unless you disable it during
* cluster creation. For more information, see CloudWatch
* Container Insights in the Amazon Elastic Container Service Developer Guide.
*
*
* Amazon ECS is introducing tagging authorization for resource creation. Users must have permissions for actions
* that create the resource, such as ecsCreateCluster. If tags are specified when you create a
* resource, Amazon Web Services performs additional authorization to verify if users or roles have permissions to
* create tags. Therefore, you must grant explicit permissions to use the ecs:TagResource action. For
* more information, see Grant
* permission to tag resources on creation in the Amazon ECS Developer Guide.
*
*
* When Amazon Web Services determines that a security or infrastructure update is needed for an Amazon ECS task
* hosted on Fargate, the tasks need to be stopped and new tasks launched to replace them. Use
* fargateTaskRetirementWaitPeriod to configure the wait time to retire a Fargate task. For information
* about the Fargate tasks maintenance, see Amazon Web Services
* Fargate task maintenance in the Amazon ECS Developer Guide.
*
*
* The guardDutyActivate parameter is read-only in Amazon ECS and indicates whether Amazon ECS Runtime
* Monitoring is enabled or disabled by your security administrator in your Amazon ECS account. Amazon GuardDuty
* controls this account setting on your behalf. For more information, see Protecting
* Amazon ECS workloads with Amazon ECS Runtime Monitoring.
*
*
*
* This is a convenience which creates an instance of the {@link PutAccountSettingRequest.Builder} avoiding the need
* to create one manually via {@link PutAccountSettingRequest#builder()}
*
*
* @param putAccountSettingRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.PutAccountSettingRequest.Builder} to create a request.
* @return Result of the PutAccountSetting operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.PutAccountSetting
* @see AWS API
* Documentation
*/
default PutAccountSettingResponse putAccountSetting(Consumer putAccountSettingRequest)
throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException,
EcsException {
return putAccountSetting(PutAccountSettingRequest.builder().applyMutation(putAccountSettingRequest).build());
}
/**
*
* Modifies an account setting for all users on an account for whom no individual account setting has been
* specified. Account settings are set on a per-Region basis.
*
*
* @param putAccountSettingDefaultRequest
* @return Result of the PutAccountSettingDefault operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.PutAccountSettingDefault
* @see AWS
* API Documentation
*/
default PutAccountSettingDefaultResponse putAccountSettingDefault(
PutAccountSettingDefaultRequest putAccountSettingDefaultRequest) throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Modifies an account setting for all users on an account for whom no individual account setting has been
* specified. Account settings are set on a per-Region basis.
*
*
*
* This is a convenience which creates an instance of the {@link PutAccountSettingDefaultRequest.Builder} avoiding
* the need to create one manually via {@link PutAccountSettingDefaultRequest#builder()}
*
*
* @param putAccountSettingDefaultRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.PutAccountSettingDefaultRequest.Builder} to create a
* request.
* @return Result of the PutAccountSettingDefault operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.PutAccountSettingDefault
* @see AWS
* API Documentation
*/
default PutAccountSettingDefaultResponse putAccountSettingDefault(
Consumer putAccountSettingDefaultRequest) throws ServerException,
ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return putAccountSettingDefault(PutAccountSettingDefaultRequest.builder().applyMutation(putAccountSettingDefaultRequest)
.build());
}
/**
*
* Create or update an attribute on an Amazon ECS resource. If the attribute doesn't exist, it's created. If the
* attribute exists, its value is replaced with the specified value. To delete an attribute, use
* DeleteAttributes. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide.
*
*
* @param putAttributesRequest
* @return Result of the PutAttributes operation returned by the service.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws TargetNotFoundException
* The specified target wasn't found. You can view your available container instances with
* ListContainerInstances. Amazon ECS container instances are cluster-specific and Region-specific.
* @throws AttributeLimitExceededException
* You can apply up to 10 custom attributes for each resource. You can view the attributes of a resource
* with ListAttributes. You can remove existing attributes on a resource with
* DeleteAttributes.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.PutAttributes
* @see AWS API
* Documentation
*/
default PutAttributesResponse putAttributes(PutAttributesRequest putAttributesRequest) throws ClusterNotFoundException,
TargetNotFoundException, AttributeLimitExceededException, InvalidParameterException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Create or update an attribute on an Amazon ECS resource. If the attribute doesn't exist, it's created. If the
* attribute exists, its value is replaced with the specified value. To delete an attribute, use
* DeleteAttributes. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link PutAttributesRequest.Builder} avoiding the need to
* create one manually via {@link PutAttributesRequest#builder()}
*
*
* @param putAttributesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.PutAttributesRequest.Builder} to create a request.
* @return Result of the PutAttributes operation returned by the service.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws TargetNotFoundException
* The specified target wasn't found. You can view your available container instances with
* ListContainerInstances. Amazon ECS container instances are cluster-specific and Region-specific.
* @throws AttributeLimitExceededException
* You can apply up to 10 custom attributes for each resource. You can view the attributes of a resource
* with ListAttributes. You can remove existing attributes on a resource with
* DeleteAttributes.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.PutAttributes
* @see AWS API
* Documentation
*/
default PutAttributesResponse putAttributes(Consumer putAttributesRequest)
throws ClusterNotFoundException, TargetNotFoundException, AttributeLimitExceededException, InvalidParameterException,
AwsServiceException, SdkClientException, EcsException {
return putAttributes(PutAttributesRequest.builder().applyMutation(putAttributesRequest).build());
}
/**
*
* Modifies the available capacity providers and the default capacity provider strategy for a cluster.
*
*
* You must specify both the available capacity providers and a default capacity provider strategy for the cluster.
* If the specified cluster has existing capacity providers associated with it, you must specify all existing
* capacity providers in addition to any new ones you want to add. Any existing capacity providers that are
* associated with a cluster that are omitted from a PutClusterCapacityProviders API call will be
* disassociated with the cluster. You can only disassociate an existing capacity provider from a cluster if it's
* not being used by any existing tasks.
*
*
* When creating a service or running a task on a cluster, if no capacity provider or launch type is specified, then
* the cluster's default capacity provider strategy is used. We recommend that you define a default capacity
* provider strategy for your cluster. However, you must specify an empty array ([]) to bypass defining
* a default strategy.
*
*
* @param putClusterCapacityProvidersRequest
* @return Result of the PutClusterCapacityProviders operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ResourceInUseException
* The specified resource is in-use and can't be removed.
* @throws UpdateInProgressException
* There's already a current Amazon ECS container agent update in progress on the container instance that's
* specified. If the container agent becomes disconnected while it's in a transitional stage, such as
* PENDING or STAGING, the update process can get stuck in that state. However,
* when the agent reconnects, it resumes where it stopped previously.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.PutClusterCapacityProviders
* @see AWS API Documentation
*/
default PutClusterCapacityProvidersResponse putClusterCapacityProviders(
PutClusterCapacityProvidersRequest putClusterCapacityProvidersRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, ResourceInUseException, UpdateInProgressException,
AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Modifies the available capacity providers and the default capacity provider strategy for a cluster.
*
*
* You must specify both the available capacity providers and a default capacity provider strategy for the cluster.
* If the specified cluster has existing capacity providers associated with it, you must specify all existing
* capacity providers in addition to any new ones you want to add. Any existing capacity providers that are
* associated with a cluster that are omitted from a PutClusterCapacityProviders API call will be
* disassociated with the cluster. You can only disassociate an existing capacity provider from a cluster if it's
* not being used by any existing tasks.
*
*
* When creating a service or running a task on a cluster, if no capacity provider or launch type is specified, then
* the cluster's default capacity provider strategy is used. We recommend that you define a default capacity
* provider strategy for your cluster. However, you must specify an empty array ([]) to bypass defining
* a default strategy.
*
*
*
* This is a convenience which creates an instance of the {@link PutClusterCapacityProvidersRequest.Builder}
* avoiding the need to create one manually via {@link PutClusterCapacityProvidersRequest#builder()}
*
*
* @param putClusterCapacityProvidersRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.PutClusterCapacityProvidersRequest.Builder} to create a
* request.
* @return Result of the PutClusterCapacityProviders operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ResourceInUseException
* The specified resource is in-use and can't be removed.
* @throws UpdateInProgressException
* There's already a current Amazon ECS container agent update in progress on the container instance that's
* specified. If the container agent becomes disconnected while it's in a transitional stage, such as
* PENDING or STAGING, the update process can get stuck in that state. However,
* when the agent reconnects, it resumes where it stopped previously.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.PutClusterCapacityProviders
* @see AWS API Documentation
*/
default PutClusterCapacityProvidersResponse putClusterCapacityProviders(
Consumer putClusterCapacityProvidersRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, ResourceInUseException,
UpdateInProgressException, AwsServiceException, SdkClientException, EcsException {
return putClusterCapacityProviders(PutClusterCapacityProvidersRequest.builder()
.applyMutation(putClusterCapacityProvidersRequest).build());
}
/**
*
*
* This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
*
*
*
* Registers an EC2 instance into the specified cluster. This instance becomes available to place containers on.
*
*
* @param registerContainerInstanceRequest
* @return Result of the RegisterContainerInstance operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.RegisterContainerInstance
* @see AWS
* API Documentation
*/
default RegisterContainerInstanceResponse registerContainerInstance(
RegisterContainerInstanceRequest registerContainerInstanceRequest) throws ServerException, ClientException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
*
* This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
*
*
*
* Registers an EC2 instance into the specified cluster. This instance becomes available to place containers on.
*
*
*
* This is a convenience which creates an instance of the {@link RegisterContainerInstanceRequest.Builder} avoiding
* the need to create one manually via {@link RegisterContainerInstanceRequest#builder()}
*
*
* @param registerContainerInstanceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.RegisterContainerInstanceRequest.Builder} to create a
* request.
* @return Result of the RegisterContainerInstance operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.RegisterContainerInstance
* @see AWS
* API Documentation
*/
default RegisterContainerInstanceResponse registerContainerInstance(
Consumer registerContainerInstanceRequest) throws ServerException,
ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return registerContainerInstance(RegisterContainerInstanceRequest.builder()
.applyMutation(registerContainerInstanceRequest).build());
}
/**
*
* Registers a new task definition from the supplied family and containerDefinitions.
* Optionally, you can add data volumes to your containers with the volumes parameter. For more
* information about task definition parameters and defaults, see Amazon ECS Task
* Definitions in the Amazon Elastic Container Service Developer Guide.
*
*
* You can specify a role for your task with the taskRoleArn parameter. When you specify a role for a
* task, its containers can then use the latest versions of the CLI or SDKs to make API requests to the Amazon Web
* Services services that are specified in the policy that's associated with the role. For more information, see IAM Roles for Tasks in
* the Amazon Elastic Container Service Developer Guide.
*
*
* You can specify a Docker networking mode for the containers in your task definition with the
* networkMode parameter. The available network modes correspond to those described in Network settings in the Docker run
* reference. If you specify the awsvpc network mode, the task is allocated an elastic network
* interface, and you must specify a NetworkConfiguration when you create a service or run a task with the
* task definition. For more information, see Task Networking in
* the Amazon Elastic Container Service Developer Guide.
*
*
* @param registerTaskDefinitionRequest
* @return Result of the RegisterTaskDefinition operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.RegisterTaskDefinition
* @see AWS
* API Documentation
*/
default RegisterTaskDefinitionResponse registerTaskDefinition(RegisterTaskDefinitionRequest registerTaskDefinitionRequest)
throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Registers a new task definition from the supplied family and containerDefinitions.
* Optionally, you can add data volumes to your containers with the volumes parameter. For more
* information about task definition parameters and defaults, see Amazon ECS Task
* Definitions in the Amazon Elastic Container Service Developer Guide.
*
*
* You can specify a role for your task with the taskRoleArn parameter. When you specify a role for a
* task, its containers can then use the latest versions of the CLI or SDKs to make API requests to the Amazon Web
* Services services that are specified in the policy that's associated with the role. For more information, see IAM Roles for Tasks in
* the Amazon Elastic Container Service Developer Guide.
*
*
* You can specify a Docker networking mode for the containers in your task definition with the
* networkMode parameter. The available network modes correspond to those described in Network settings in the Docker run
* reference. If you specify the awsvpc network mode, the task is allocated an elastic network
* interface, and you must specify a NetworkConfiguration when you create a service or run a task with the
* task definition. For more information, see Task Networking in
* the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link RegisterTaskDefinitionRequest.Builder} avoiding the
* need to create one manually via {@link RegisterTaskDefinitionRequest#builder()}
*
*
* @param registerTaskDefinitionRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.RegisterTaskDefinitionRequest.Builder} to create a
* request.
* @return Result of the RegisterTaskDefinition operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.RegisterTaskDefinition
* @see AWS
* API Documentation
*/
default RegisterTaskDefinitionResponse registerTaskDefinition(
Consumer registerTaskDefinitionRequest) throws ServerException,
ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return registerTaskDefinition(RegisterTaskDefinitionRequest.builder().applyMutation(registerTaskDefinitionRequest)
.build());
}
/**
*
* Starts a new task using the specified task definition.
*
*
* You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places tasks using placement
* constraints and placement strategies. For more information, see Scheduling Tasks in
* the Amazon Elastic Container Service Developer Guide.
*
*
* Alternatively, you can use StartTask to use your own scheduler or place tasks manually on specific
* container instances.
*
*
*
* Starting April 15, 2023, Amazon Web Services will not onboard new customers to Amazon Elastic Inference (EI), and
* will help current customers migrate their workloads to options that offer better price and performance. After
* April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon
* SageMaker, Amazon ECS, or Amazon EC2. However, customers who have used Amazon EI at least once during the past
* 30-day period are considered current customers and will be able to continue using the service.
*
*
*
* The Amazon ECS API follows an eventual consistency model. This is because of the distributed nature of the system
* supporting the API. This means that the result of an API command you run that affects your Amazon ECS resources
* might not be immediately visible to all subsequent commands you run. Keep this in mind when you carry out an API
* command that immediately follows a previous API command.
*
*
* To manage eventual consistency, you can do the following:
*
*
* -
*
* Confirm the state of the resource before you run a command to modify it. Run the DescribeTasks command using an
* exponential backoff algorithm to ensure that you allow enough time for the previous command to propagate through
* the system. To do this, run the DescribeTasks command repeatedly, starting with a couple of seconds of wait time
* and increasing gradually up to five minutes of wait time.
*
*
* -
*
* Add wait time between subsequent commands, even if the DescribeTasks command returns an accurate response. Apply
* an exponential backoff algorithm starting with a couple of seconds of wait time, and increase gradually up to
* about five minutes of wait time.
*
*
*
*
* @param runTaskRequest
* @return Result of the RunTask operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws PlatformUnknownException
* The specified platform version doesn't exist.
* @throws PlatformTaskDefinitionIncompatibilityException
* The specified platform version doesn't satisfy the required capabilities of the task definition.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws BlockedException
* Your Amazon Web Services account was blocked. For more information, contact Amazon Web Services Support.
* @throws ConflictException
* The RunTask request could not be processed due to conflicts. The provided
* clientToken is already in use with a different RunTask request. The
* resourceIds are the existing task ARNs which are already associated with the
* clientToken.
*
* To fix this issue:
*
*
* -
*
* Run RunTask with a unique clientToken.
*
*
* -
*
* Run RunTask with the clientToken and the original set of parameters
*
*
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.RunTask
* @see AWS API
* Documentation
*/
default RunTaskResponse runTask(RunTaskRequest runTaskRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, PlatformUnknownException,
PlatformTaskDefinitionIncompatibilityException, AccessDeniedException, BlockedException, ConflictException,
AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Starts a new task using the specified task definition.
*
*
* You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places tasks using placement
* constraints and placement strategies. For more information, see Scheduling Tasks in
* the Amazon Elastic Container Service Developer Guide.
*
*
* Alternatively, you can use StartTask to use your own scheduler or place tasks manually on specific
* container instances.
*
*
*
* Starting April 15, 2023, Amazon Web Services will not onboard new customers to Amazon Elastic Inference (EI), and
* will help current customers migrate their workloads to options that offer better price and performance. After
* April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon
* SageMaker, Amazon ECS, or Amazon EC2. However, customers who have used Amazon EI at least once during the past
* 30-day period are considered current customers and will be able to continue using the service.
*
*
*
* The Amazon ECS API follows an eventual consistency model. This is because of the distributed nature of the system
* supporting the API. This means that the result of an API command you run that affects your Amazon ECS resources
* might not be immediately visible to all subsequent commands you run. Keep this in mind when you carry out an API
* command that immediately follows a previous API command.
*
*
* To manage eventual consistency, you can do the following:
*
*
* -
*
* Confirm the state of the resource before you run a command to modify it. Run the DescribeTasks command using an
* exponential backoff algorithm to ensure that you allow enough time for the previous command to propagate through
* the system. To do this, run the DescribeTasks command repeatedly, starting with a couple of seconds of wait time
* and increasing gradually up to five minutes of wait time.
*
*
* -
*
* Add wait time between subsequent commands, even if the DescribeTasks command returns an accurate response. Apply
* an exponential backoff algorithm starting with a couple of seconds of wait time, and increase gradually up to
* about five minutes of wait time.
*
*
*
*
*
* This is a convenience which creates an instance of the {@link RunTaskRequest.Builder} avoiding the need to create
* one manually via {@link RunTaskRequest#builder()}
*
*
* @param runTaskRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.RunTaskRequest.Builder} to create a request.
* @return Result of the RunTask operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws PlatformUnknownException
* The specified platform version doesn't exist.
* @throws PlatformTaskDefinitionIncompatibilityException
* The specified platform version doesn't satisfy the required capabilities of the task definition.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws BlockedException
* Your Amazon Web Services account was blocked. For more information, contact Amazon Web Services Support.
* @throws ConflictException
* The RunTask request could not be processed due to conflicts. The provided
* clientToken is already in use with a different RunTask request. The
* resourceIds are the existing task ARNs which are already associated with the
* clientToken.
*
* To fix this issue:
*
*
* -
*
* Run RunTask with a unique clientToken.
*
*
* -
*
* Run RunTask with the clientToken and the original set of parameters
*
*
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.RunTask
* @see AWS API
* Documentation
*/
default RunTaskResponse runTask(Consumer runTaskRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, PlatformUnknownException,
PlatformTaskDefinitionIncompatibilityException, AccessDeniedException, BlockedException, ConflictException,
AwsServiceException, SdkClientException, EcsException {
return runTask(RunTaskRequest.builder().applyMutation(runTaskRequest).build());
}
/**
*
* Starts a new task from the specified task definition on the specified container instance or instances.
*
*
*
* Starting April 15, 2023, Amazon Web Services will not onboard new customers to Amazon Elastic Inference (EI), and
* will help current customers migrate their workloads to options that offer better price and performance. After
* April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon
* SageMaker, Amazon ECS, or Amazon EC2. However, customers who have used Amazon EI at least once during the past
* 30-day period are considered current customers and will be able to continue using the service.
*
*
*
* Alternatively, you can use RunTask to place tasks for you. For more information, see Scheduling Tasks in
* the Amazon Elastic Container Service Developer Guide.
*
*
* @param startTaskRequest
* @return Result of the StartTask operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.StartTask
* @see AWS API
* Documentation
*/
default StartTaskResponse startTask(StartTaskRequest startTaskRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Starts a new task from the specified task definition on the specified container instance or instances.
*
*
*
* Starting April 15, 2023, Amazon Web Services will not onboard new customers to Amazon Elastic Inference (EI), and
* will help current customers migrate their workloads to options that offer better price and performance. After
* April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon
* SageMaker, Amazon ECS, or Amazon EC2. However, customers who have used Amazon EI at least once during the past
* 30-day period are considered current customers and will be able to continue using the service.
*
*
*
* Alternatively, you can use RunTask to place tasks for you. For more information, see Scheduling Tasks in
* the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link StartTaskRequest.Builder} avoiding the need to
* create one manually via {@link StartTaskRequest#builder()}
*
*
* @param startTaskRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.StartTaskRequest.Builder} to create a request.
* @return Result of the StartTask operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.StartTask
* @see AWS API
* Documentation
*/
default StartTaskResponse startTask(Consumer startTaskRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException,
EcsException {
return startTask(StartTaskRequest.builder().applyMutation(startTaskRequest).build());
}
/**
*
* Stops a running task. Any tags associated with the task will be deleted.
*
*
* When StopTask is called on a task, the equivalent of docker stop is issued to the containers
* running in the task. This results in a SIGTERM value and a default 30-second timeout, after which
* the SIGKILL value is sent and the containers are forcibly stopped. If the container handles the
* SIGTERM value gracefully and exits within 30 seconds from receiving it, no SIGKILL
* value is sent.
*
*
*
* The default 30-second timeout can be configured on the Amazon ECS container agent with the
* ECS_CONTAINER_STOP_TIMEOUT variable. For more information, see Amazon ECS Container
* Agent Configuration in the Amazon Elastic Container Service Developer Guide.
*
*
*
* @param stopTaskRequest
* @return Result of the StopTask operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.StopTask
* @see AWS API
* Documentation
*/
default StopTaskResponse stopTask(StopTaskRequest stopTaskRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Stops a running task. Any tags associated with the task will be deleted.
*
*
* When StopTask is called on a task, the equivalent of docker stop is issued to the containers
* running in the task. This results in a SIGTERM value and a default 30-second timeout, after which
* the SIGKILL value is sent and the containers are forcibly stopped. If the container handles the
* SIGTERM value gracefully and exits within 30 seconds from receiving it, no SIGKILL
* value is sent.
*
*
*
* The default 30-second timeout can be configured on the Amazon ECS container agent with the
* ECS_CONTAINER_STOP_TIMEOUT variable. For more information, see Amazon ECS Container
* Agent Configuration in the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link StopTaskRequest.Builder} avoiding the need to
* create one manually via {@link StopTaskRequest#builder()}
*
*
* @param stopTaskRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.StopTaskRequest.Builder} to create a request.
* @return Result of the StopTask operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.StopTask
* @see AWS API
* Documentation
*/
default StopTaskResponse stopTask(Consumer stopTaskRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException {
return stopTask(StopTaskRequest.builder().applyMutation(stopTaskRequest).build());
}
/**
*
*
* This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
*
*
*
* Sent to acknowledge that an attachment changed states.
*
*
* @param submitAttachmentStateChangesRequest
* @return Result of the SubmitAttachmentStateChanges operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.SubmitAttachmentStateChanges
* @see AWS API Documentation
*/
default SubmitAttachmentStateChangesResponse submitAttachmentStateChanges(
SubmitAttachmentStateChangesRequest submitAttachmentStateChangesRequest) throws ServerException, ClientException,
AccessDeniedException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
*
* This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
*
*
*
* Sent to acknowledge that an attachment changed states.
*
*
*
* This is a convenience which creates an instance of the {@link SubmitAttachmentStateChangesRequest.Builder}
* avoiding the need to create one manually via {@link SubmitAttachmentStateChangesRequest#builder()}
*
*
* @param submitAttachmentStateChangesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.SubmitAttachmentStateChangesRequest.Builder} to create a
* request.
* @return Result of the SubmitAttachmentStateChanges operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.SubmitAttachmentStateChanges
* @see AWS API Documentation
*/
default SubmitAttachmentStateChangesResponse submitAttachmentStateChanges(
Consumer submitAttachmentStateChangesRequest) throws ServerException,
ClientException, AccessDeniedException, InvalidParameterException, AwsServiceException, SdkClientException,
EcsException {
return submitAttachmentStateChanges(SubmitAttachmentStateChangesRequest.builder()
.applyMutation(submitAttachmentStateChangesRequest).build());
}
/**
*
*
* This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
*
*
*
* Sent to acknowledge that a container changed states.
*
*
* @param submitContainerStateChangeRequest
* @return Result of the SubmitContainerStateChange operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.SubmitContainerStateChange
* @see AWS API Documentation
*/
default SubmitContainerStateChangeResponse submitContainerStateChange(
SubmitContainerStateChangeRequest submitContainerStateChangeRequest) throws ServerException, ClientException,
AccessDeniedException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
*
* This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
*
*
*
* Sent to acknowledge that a container changed states.
*
*
*
* This is a convenience which creates an instance of the {@link SubmitContainerStateChangeRequest.Builder} avoiding
* the need to create one manually via {@link SubmitContainerStateChangeRequest#builder()}
*
*
* @param submitContainerStateChangeRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.SubmitContainerStateChangeRequest.Builder} to create a
* request.
* @return Result of the SubmitContainerStateChange operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.SubmitContainerStateChange
* @see AWS API Documentation
*/
default SubmitContainerStateChangeResponse submitContainerStateChange(
Consumer submitContainerStateChangeRequest) throws ServerException,
ClientException, AccessDeniedException, AwsServiceException, SdkClientException, EcsException {
return submitContainerStateChange(SubmitContainerStateChangeRequest.builder()
.applyMutation(submitContainerStateChangeRequest).build());
}
/**
*
*
* This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
*
*
*
* Sent to acknowledge that a task changed states.
*
*
* @param submitTaskStateChangeRequest
* @return Result of the SubmitTaskStateChange operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.SubmitTaskStateChange
* @see AWS API
* Documentation
*/
default SubmitTaskStateChangeResponse submitTaskStateChange(SubmitTaskStateChangeRequest submitTaskStateChangeRequest)
throws ServerException, ClientException, AccessDeniedException, InvalidParameterException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
*
* This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
*
*
*
* Sent to acknowledge that a task changed states.
*
*
*
* This is a convenience which creates an instance of the {@link SubmitTaskStateChangeRequest.Builder} avoiding the
* need to create one manually via {@link SubmitTaskStateChangeRequest#builder()}
*
*
* @param submitTaskStateChangeRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.SubmitTaskStateChangeRequest.Builder} to create a
* request.
* @return Result of the SubmitTaskStateChange operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.SubmitTaskStateChange
* @see AWS API
* Documentation
*/
default SubmitTaskStateChangeResponse submitTaskStateChange(
Consumer submitTaskStateChangeRequest) throws ServerException, ClientException,
AccessDeniedException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return submitTaskStateChange(SubmitTaskStateChangeRequest.builder().applyMutation(submitTaskStateChangeRequest).build());
}
/**
*
* Associates the specified tags to a resource with the specified resourceArn. If existing tags on a
* resource aren't specified in the request parameters, they aren't changed. When a resource is deleted, the tags
* that are associated with that resource are deleted as well.
*
*
* @param tagResourceRequest
* @return Result of the TagResource operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ResourceNotFoundException
* The specified resource wasn't found.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.TagResource
* @see AWS API
* Documentation
*/
default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest) throws ServerException, ClientException,
ClusterNotFoundException, ResourceNotFoundException, InvalidParameterException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Associates the specified tags to a resource with the specified resourceArn. If existing tags on a
* resource aren't specified in the request parameters, they aren't changed. When a resource is deleted, the tags
* that are associated with that resource are deleted as well.
*
*
*
* This is a convenience which creates an instance of the {@link TagResourceRequest.Builder} avoiding the need to
* create one manually via {@link TagResourceRequest#builder()}
*
*
* @param tagResourceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.TagResourceRequest.Builder} to create a request.
* @return Result of the TagResource operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ResourceNotFoundException
* The specified resource wasn't found.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.TagResource
* @see AWS API
* Documentation
*/
default TagResourceResponse tagResource(Consumer tagResourceRequest) throws ServerException,
ClientException, ClusterNotFoundException, ResourceNotFoundException, InvalidParameterException, AwsServiceException,
SdkClientException, EcsException {
return tagResource(TagResourceRequest.builder().applyMutation(tagResourceRequest).build());
}
/**
*
* Deletes specified tags from a resource.
*
*
* @param untagResourceRequest
* @return Result of the UntagResource operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ResourceNotFoundException
* The specified resource wasn't found.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UntagResource
* @see AWS API
* Documentation
*/
default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest) throws ServerException,
ClientException, ClusterNotFoundException, ResourceNotFoundException, InvalidParameterException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Deletes specified tags from a resource.
*
*
*
* This is a convenience which creates an instance of the {@link UntagResourceRequest.Builder} avoiding the need to
* create one manually via {@link UntagResourceRequest#builder()}
*
*
* @param untagResourceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.UntagResourceRequest.Builder} to create a request.
* @return Result of the UntagResource operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ResourceNotFoundException
* The specified resource wasn't found.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UntagResource
* @see AWS API
* Documentation
*/
default UntagResourceResponse untagResource(Consumer untagResourceRequest)
throws ServerException, ClientException, ClusterNotFoundException, ResourceNotFoundException,
InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return untagResource(UntagResourceRequest.builder().applyMutation(untagResourceRequest).build());
}
/**
*
* Modifies the parameters for a capacity provider.
*
*
* @param updateCapacityProviderRequest
* @return Result of the UpdateCapacityProvider operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateCapacityProvider
* @see AWS
* API Documentation
*/
default UpdateCapacityProviderResponse updateCapacityProvider(UpdateCapacityProviderRequest updateCapacityProviderRequest)
throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Modifies the parameters for a capacity provider.
*
*
*
* This is a convenience which creates an instance of the {@link UpdateCapacityProviderRequest.Builder} avoiding the
* need to create one manually via {@link UpdateCapacityProviderRequest#builder()}
*
*
* @param updateCapacityProviderRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.UpdateCapacityProviderRequest.Builder} to create a
* request.
* @return Result of the UpdateCapacityProvider operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateCapacityProvider
* @see AWS
* API Documentation
*/
default UpdateCapacityProviderResponse updateCapacityProvider(
Consumer updateCapacityProviderRequest) throws ServerException,
ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return updateCapacityProvider(UpdateCapacityProviderRequest.builder().applyMutation(updateCapacityProviderRequest)
.build());
}
/**
*
* Updates the cluster.
*
*
* @param updateClusterRequest
* @return Result of the UpdateCluster operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateCluster
* @see AWS API
* Documentation
*/
default UpdateClusterResponse updateCluster(UpdateClusterRequest updateClusterRequest) throws ServerException,
ClientException, ClusterNotFoundException, InvalidParameterException, NamespaceNotFoundException,
AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Updates the cluster.
*
*
*
* This is a convenience which creates an instance of the {@link UpdateClusterRequest.Builder} avoiding the need to
* create one manually via {@link UpdateClusterRequest#builder()}
*
*
* @param updateClusterRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.UpdateClusterRequest.Builder} to create a request.
* @return Result of the UpdateCluster operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateCluster
* @see AWS API
* Documentation
*/
default UpdateClusterResponse updateCluster(Consumer updateClusterRequest)
throws ServerException, ClientException, ClusterNotFoundException, InvalidParameterException,
NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException {
return updateCluster(UpdateClusterRequest.builder().applyMutation(updateClusterRequest).build());
}
/**
*
* Modifies the settings to use for a cluster.
*
*
* @param updateClusterSettingsRequest
* @return Result of the UpdateClusterSettings operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateClusterSettings
* @see AWS API
* Documentation
*/
default UpdateClusterSettingsResponse updateClusterSettings(UpdateClusterSettingsRequest updateClusterSettingsRequest)
throws ServerException, ClientException, ClusterNotFoundException, InvalidParameterException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Modifies the settings to use for a cluster.
*
*
*
* This is a convenience which creates an instance of the {@link UpdateClusterSettingsRequest.Builder} avoiding the
* need to create one manually via {@link UpdateClusterSettingsRequest#builder()}
*
*
* @param updateClusterSettingsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.UpdateClusterSettingsRequest.Builder} to create a
* request.
* @return Result of the UpdateClusterSettings operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateClusterSettings
* @see AWS API
* Documentation
*/
default UpdateClusterSettingsResponse updateClusterSettings(
Consumer updateClusterSettingsRequest) throws ServerException, ClientException,
ClusterNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException {
return updateClusterSettings(UpdateClusterSettingsRequest.builder().applyMutation(updateClusterSettingsRequest).build());
}
/**
*
* Updates the Amazon ECS container agent on a specified container instance. Updating the Amazon ECS container agent
* doesn't interrupt running tasks or services on the container instance. The process for updating the agent differs
* depending on whether your container instance was launched with the Amazon ECS-optimized AMI or another operating
* system.
*
*
*
* The UpdateContainerAgent API isn't supported for container instances using the Amazon ECS-optimized
* Amazon Linux 2 (arm64) AMI. To update the container agent, you can update the ecs-init package. This
* updates the agent. For more information, see Updating the Amazon
* ECS container agent in the Amazon Elastic Container Service Developer Guide.
*
*
*
* Agent updates with the UpdateContainerAgent API operation do not apply to Windows container
* instances. We recommend that you launch new container instances to update the agent version in your Windows
* clusters.
*
*
*
* The UpdateContainerAgent API requires an Amazon ECS-optimized AMI or Amazon Linux AMI with the
* ecs-init service installed and running. For help updating the Amazon ECS container agent on other
* operating systems, see Manually updating the Amazon ECS container agent in the Amazon Elastic Container Service Developer
* Guide.
*
*
* @param updateContainerAgentRequest
* @return Result of the UpdateContainerAgent operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UpdateInProgressException
* There's already a current Amazon ECS container agent update in progress on the container instance that's
* specified. If the container agent becomes disconnected while it's in a transitional stage, such as
* PENDING or STAGING, the update process can get stuck in that state. However,
* when the agent reconnects, it resumes where it stopped previously.
* @throws NoUpdateAvailableException
* There's no update available for this Amazon ECS container agent. This might be because the agent is
* already running the latest version or because it's so old that there's no update path to the current
* version.
* @throws MissingVersionException
* Amazon ECS can't determine the current version of the Amazon ECS container agent on the container
* instance and doesn't have enough information to proceed with an update. This could be because the agent
* running on the container instance is a previous or custom version that doesn't use our version
* information.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateContainerAgent
* @see AWS API
* Documentation
*/
default UpdateContainerAgentResponse updateContainerAgent(UpdateContainerAgentRequest updateContainerAgentRequest)
throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException,
UpdateInProgressException, NoUpdateAvailableException, MissingVersionException, AwsServiceException,
SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Updates the Amazon ECS container agent on a specified container instance. Updating the Amazon ECS container agent
* doesn't interrupt running tasks or services on the container instance. The process for updating the agent differs
* depending on whether your container instance was launched with the Amazon ECS-optimized AMI or another operating
* system.
*
*
*
* The UpdateContainerAgent API isn't supported for container instances using the Amazon ECS-optimized
* Amazon Linux 2 (arm64) AMI. To update the container agent, you can update the ecs-init package. This
* updates the agent. For more information, see Updating the Amazon
* ECS container agent in the Amazon Elastic Container Service Developer Guide.
*
*
*
* Agent updates with the UpdateContainerAgent API operation do not apply to Windows container
* instances. We recommend that you launch new container instances to update the agent version in your Windows
* clusters.
*
*
*
* The UpdateContainerAgent API requires an Amazon ECS-optimized AMI or Amazon Linux AMI with the
* ecs-init service installed and running. For help updating the Amazon ECS container agent on other
* operating systems, see Manually updating the Amazon ECS container agent in the Amazon Elastic Container Service Developer
* Guide.
*
*
*
* This is a convenience which creates an instance of the {@link UpdateContainerAgentRequest.Builder} avoiding the
* need to create one manually via {@link UpdateContainerAgentRequest#builder()}
*
*
* @param updateContainerAgentRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.UpdateContainerAgentRequest.Builder} to create a request.
* @return Result of the UpdateContainerAgent operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UpdateInProgressException
* There's already a current Amazon ECS container agent update in progress on the container instance that's
* specified. If the container agent becomes disconnected while it's in a transitional stage, such as
* PENDING or STAGING, the update process can get stuck in that state. However,
* when the agent reconnects, it resumes where it stopped previously.
* @throws NoUpdateAvailableException
* There's no update available for this Amazon ECS container agent. This might be because the agent is
* already running the latest version or because it's so old that there's no update path to the current
* version.
* @throws MissingVersionException
* Amazon ECS can't determine the current version of the Amazon ECS container agent on the container
* instance and doesn't have enough information to proceed with an update. This could be because the agent
* running on the container instance is a previous or custom version that doesn't use our version
* information.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateContainerAgent
* @see AWS API
* Documentation
*/
default UpdateContainerAgentResponse updateContainerAgent(
Consumer updateContainerAgentRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, UpdateInProgressException, NoUpdateAvailableException,
MissingVersionException, AwsServiceException, SdkClientException, EcsException {
return updateContainerAgent(UpdateContainerAgentRequest.builder().applyMutation(updateContainerAgentRequest).build());
}
/**
*
* Modifies the status of an Amazon ECS container instance.
*
*
* Once a container instance has reached an ACTIVE state, you can change the status of a container
* instance to DRAINING to manually remove an instance from a cluster, for example to perform system
* updates, update the Docker daemon, or scale down the cluster size.
*
*
*
* A container instance can't be changed to DRAINING until it has reached an ACTIVE
* status. If the instance is in any other status, an error will be received.
*
*
*
* When you set a container instance to DRAINING, Amazon ECS prevents new tasks from being scheduled
* for placement on the container instance and replacement service tasks are started on other container instances in
* the cluster if the resources are available. Service tasks on the container instance that are in the
* PENDING state are stopped immediately.
*
*
* Service tasks on the container instance that are in the RUNNING state are stopped and replaced
* according to the service's deployment configuration parameters, minimumHealthyPercent and
* maximumPercent. You can change the deployment configuration of your service using
* UpdateService.
*
*
* -
*
* If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount
* temporarily during task replacement. For example, desiredCount is four tasks, a minimum of 50%
* allows the scheduler to stop two existing tasks before starting two new tasks. If the minimum is 100%, the
* service scheduler can't remove existing tasks until the replacement tasks are considered healthy. Tasks for
* services that do not use a load balancer are considered healthy if they're in the RUNNING state.
* Tasks for services that use a load balancer are considered healthy if they're in the RUNNING state
* and are reported as healthy by the load balancer.
*
*
* -
*
* The maximumPercent parameter represents an upper limit on the number of running tasks during task
* replacement. You can use this to define the replacement batch size. For example, if desiredCount is
* four tasks, a maximum of 200% starts four new tasks before stopping the four tasks to be drained, provided that
* the cluster resources required to do this are available. If the maximum is 100%, then replacement tasks can't
* start until the draining tasks have stopped.
*
*
*
*
* Any PENDING or RUNNING tasks that do not belong to a service aren't affected. You must
* wait for them to finish or stop them manually.
*
*
* A container instance has completed draining when it has no more RUNNING tasks. You can verify this
* using ListTasks.
*
*
* When a container instance has been drained, you can set a container instance to ACTIVE status and
* once it has reached that status the Amazon ECS scheduler can begin scheduling tasks on the instance again.
*
*
* @param updateContainerInstancesStateRequest
* @return Result of the UpdateContainerInstancesState operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateContainerInstancesState
* @see AWS API Documentation
*/
default UpdateContainerInstancesStateResponse updateContainerInstancesState(
UpdateContainerInstancesStateRequest updateContainerInstancesStateRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Modifies the status of an Amazon ECS container instance.
*
*
* Once a container instance has reached an ACTIVE state, you can change the status of a container
* instance to DRAINING to manually remove an instance from a cluster, for example to perform system
* updates, update the Docker daemon, or scale down the cluster size.
*
*
*
* A container instance can't be changed to DRAINING until it has reached an ACTIVE
* status. If the instance is in any other status, an error will be received.
*
*
*
* When you set a container instance to DRAINING, Amazon ECS prevents new tasks from being scheduled
* for placement on the container instance and replacement service tasks are started on other container instances in
* the cluster if the resources are available. Service tasks on the container instance that are in the
* PENDING state are stopped immediately.
*
*
* Service tasks on the container instance that are in the RUNNING state are stopped and replaced
* according to the service's deployment configuration parameters, minimumHealthyPercent and
* maximumPercent. You can change the deployment configuration of your service using
* UpdateService.
*
*
* -
*
* If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount
* temporarily during task replacement. For example, desiredCount is four tasks, a minimum of 50%
* allows the scheduler to stop two existing tasks before starting two new tasks. If the minimum is 100%, the
* service scheduler can't remove existing tasks until the replacement tasks are considered healthy. Tasks for
* services that do not use a load balancer are considered healthy if they're in the RUNNING state.
* Tasks for services that use a load balancer are considered healthy if they're in the RUNNING state
* and are reported as healthy by the load balancer.
*
*
* -
*
* The maximumPercent parameter represents an upper limit on the number of running tasks during task
* replacement. You can use this to define the replacement batch size. For example, if desiredCount is
* four tasks, a maximum of 200% starts four new tasks before stopping the four tasks to be drained, provided that
* the cluster resources required to do this are available. If the maximum is 100%, then replacement tasks can't
* start until the draining tasks have stopped.
*
*
*
*
* Any PENDING or RUNNING tasks that do not belong to a service aren't affected. You must
* wait for them to finish or stop them manually.
*
*
* A container instance has completed draining when it has no more RUNNING tasks. You can verify this
* using ListTasks.
*
*
* When a container instance has been drained, you can set a container instance to ACTIVE status and
* once it has reached that status the Amazon ECS scheduler can begin scheduling tasks on the instance again.
*
*
*
* This is a convenience which creates an instance of the {@link UpdateContainerInstancesStateRequest.Builder}
* avoiding the need to create one manually via {@link UpdateContainerInstancesStateRequest#builder()}
*
*
* @param updateContainerInstancesStateRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.UpdateContainerInstancesStateRequest.Builder} to create a
* request.
* @return Result of the UpdateContainerInstancesState operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateContainerInstancesState
* @see AWS API Documentation
*/
default UpdateContainerInstancesStateResponse updateContainerInstancesState(
Consumer updateContainerInstancesStateRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException,
EcsException {
return updateContainerInstancesState(UpdateContainerInstancesStateRequest.builder()
.applyMutation(updateContainerInstancesStateRequest).build());
}
/**
*
* Modifies the parameters of a service.
*
*
* For services using the rolling update (ECS) you can update the desired count, deployment
* configuration, network configuration, load balancers, service registries, enable ECS managed tags option,
* propagate tags option, task placement constraints and strategies, and task definition. When you update any of
* these parameters, Amazon ECS starts new tasks with the new configuration.
*
*
* For services using the blue/green (CODE_DEPLOY) deployment controller, only the desired count,
* deployment configuration, health check grace period, task placement constraints and strategies, enable ECS
* managed tags option, and propagate tags can be updated using this API. If the network configuration, platform
* version, task definition, or load balancer need to be updated, create a new CodeDeploy deployment. For more
* information, see CreateDeployment
* in the CodeDeploy API Reference.
*
*
* For services using an external deployment controller, you can update only the desired count, task placement
* constraints and strategies, health check grace period, enable ECS managed tags option, and propagate tags option,
* using this API. If the launch type, load balancer, network configuration, platform version, or task definition
* need to be updated, create a new task set For more information, see CreateTaskSet.
*
*
* You can add to or subtract from the number of instantiations of a task definition in a service by specifying the
* cluster that the service is running in and a new desiredCount parameter.
*
*
* If you have updated the Docker image of your application, you can create a new task definition with that image
* and deploy it to your service. The service scheduler uses the minimum healthy percent and maximum percent
* parameters (in the service's deployment configuration) to determine the deployment strategy.
*
*
*
* If your updated Docker image uses the same tag as what is in the existing task definition for your service (for
* example, my_image:latest), you don't need to create a new revision of your task definition. You can
* update the service using the forceNewDeployment option. The new tasks launched by the deployment
* pull the current image/tag combination from your repository when they start.
*
*
*
* You can also update the deployment configuration of a service. When a deployment is triggered by updating the
* task definition of a service, the service scheduler uses the deployment configuration parameters,
* minimumHealthyPercent and maximumPercent, to determine the deployment strategy.
*
*
* -
*
* If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount
* temporarily during a deployment. For example, if desiredCount is four tasks, a minimum of 50% allows
* the scheduler to stop two existing tasks before starting two new tasks. Tasks for services that don't use a load
* balancer are considered healthy if they're in the RUNNING state. Tasks for services that use a load
* balancer are considered healthy if they're in the RUNNING state and are reported as healthy by the
* load balancer.
*
*
* -
*
* The maximumPercent parameter represents an upper limit on the number of running tasks during a
* deployment. You can use it to define the deployment batch size. For example, if desiredCount is four
* tasks, a maximum of 200% starts four new tasks before stopping the four older tasks (provided that the cluster
* resources required to do this are available).
*
*
*
*
* When UpdateService stops a task during a deployment, the equivalent of docker stop is issued
* to the containers running in the task. This results in a SIGTERM and a 30-second timeout. After
* this, SIGKILL is sent and the containers are forcibly stopped. If the container handles the
* SIGTERM gracefully and exits within 30 seconds from receiving it, no SIGKILL is sent.
*
*
* When the service scheduler launches new tasks, it determines task placement in your cluster with the following
* logic.
*
*
* -
*
* Determine which of the container instances in your cluster can support your service's task definition. For
* example, they have the required CPU, memory, ports, and container instance attributes.
*
*
* -
*
* By default, the service scheduler attempts to balance tasks across Availability Zones in this manner even though
* you can choose a different placement strategy.
*
*
* -
*
* Sort the valid container instances by the fewest number of running tasks for this service in the same
* Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each
* have zero, valid container instances in either zone B or C are considered optimal for placement.
*
*
* -
*
* Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous
* steps), favoring container instances with the fewest number of running tasks for this service.
*
*
*
*
*
*
* When the service scheduler stops running tasks, it attempts to maintain balance across the Availability Zones in
* your cluster using the following logic:
*
*
* -
*
* Sort the container instances by the largest number of running tasks for this service in the same Availability
* Zone as the instance. For example, if zone A has one running service task and zones B and C each have two,
* container instances in either zone B or C are considered optimal for termination.
*
*
* -
*
* Stop the task on a container instance in an optimal Availability Zone (based on the previous steps), favoring
* container instances with the largest number of running tasks for this service.
*
*
*
*
*
* You must have a service-linked role when you update any of the following service properties:
*
*
* -
*
* loadBalancers,
*
*
* -
*
* serviceRegistries
*
*
*
*
* For more information about the role see the CreateService request parameter role .
*
*
*
* @param updateServiceRequest
* @return Result of the UpdateService operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws ServiceNotActiveException
* The specified service isn't active. You can't update a service that's inactive. If you have previously
* deleted a service, you can re-create it with CreateService.
* @throws PlatformUnknownException
* The specified platform version doesn't exist.
* @throws PlatformTaskDefinitionIncompatibilityException
* The specified platform version doesn't satisfy the required capabilities of the task definition.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateService
* @see AWS API
* Documentation
*/
default UpdateServiceResponse updateService(UpdateServiceRequest updateServiceRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException,
ServiceNotActiveException, PlatformUnknownException, PlatformTaskDefinitionIncompatibilityException,
AccessDeniedException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Modifies the parameters of a service.
*
*
* For services using the rolling update (ECS) you can update the desired count, deployment
* configuration, network configuration, load balancers, service registries, enable ECS managed tags option,
* propagate tags option, task placement constraints and strategies, and task definition. When you update any of
* these parameters, Amazon ECS starts new tasks with the new configuration.
*
*
* For services using the blue/green (CODE_DEPLOY) deployment controller, only the desired count,
* deployment configuration, health check grace period, task placement constraints and strategies, enable ECS
* managed tags option, and propagate tags can be updated using this API. If the network configuration, platform
* version, task definition, or load balancer need to be updated, create a new CodeDeploy deployment. For more
* information, see CreateDeployment
* in the CodeDeploy API Reference.
*
*
* For services using an external deployment controller, you can update only the desired count, task placement
* constraints and strategies, health check grace period, enable ECS managed tags option, and propagate tags option,
* using this API. If the launch type, load balancer, network configuration, platform version, or task definition
* need to be updated, create a new task set For more information, see CreateTaskSet.
*
*
* You can add to or subtract from the number of instantiations of a task definition in a service by specifying the
* cluster that the service is running in and a new desiredCount parameter.
*
*
* If you have updated the Docker image of your application, you can create a new task definition with that image
* and deploy it to your service. The service scheduler uses the minimum healthy percent and maximum percent
* parameters (in the service's deployment configuration) to determine the deployment strategy.
*
*
*
* If your updated Docker image uses the same tag as what is in the existing task definition for your service (for
* example, my_image:latest), you don't need to create a new revision of your task definition. You can
* update the service using the forceNewDeployment option. The new tasks launched by the deployment
* pull the current image/tag combination from your repository when they start.
*
*
*
* You can also update the deployment configuration of a service. When a deployment is triggered by updating the
* task definition of a service, the service scheduler uses the deployment configuration parameters,
* minimumHealthyPercent and maximumPercent, to determine the deployment strategy.
*
*
* -
*
* If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount
* temporarily during a deployment. For example, if desiredCount is four tasks, a minimum of 50% allows
* the scheduler to stop two existing tasks before starting two new tasks. Tasks for services that don't use a load
* balancer are considered healthy if they're in the RUNNING state. Tasks for services that use a load
* balancer are considered healthy if they're in the RUNNING state and are reported as healthy by the
* load balancer.
*
*
* -
*
* The maximumPercent parameter represents an upper limit on the number of running tasks during a
* deployment. You can use it to define the deployment batch size. For example, if desiredCount is four
* tasks, a maximum of 200% starts four new tasks before stopping the four older tasks (provided that the cluster
* resources required to do this are available).
*
*
*
*
* When UpdateService stops a task during a deployment, the equivalent of docker stop is issued
* to the containers running in the task. This results in a SIGTERM and a 30-second timeout. After
* this, SIGKILL is sent and the containers are forcibly stopped. If the container handles the
* SIGTERM gracefully and exits within 30 seconds from receiving it, no SIGKILL is sent.
*
*
* When the service scheduler launches new tasks, it determines task placement in your cluster with the following
* logic.
*
*
* -
*
* Determine which of the container instances in your cluster can support your service's task definition. For
* example, they have the required CPU, memory, ports, and container instance attributes.
*
*
* -
*
* By default, the service scheduler attempts to balance tasks across Availability Zones in this manner even though
* you can choose a different placement strategy.
*
*
* -
*
* Sort the valid container instances by the fewest number of running tasks for this service in the same
* Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each
* have zero, valid container instances in either zone B or C are considered optimal for placement.
*
*
* -
*
* Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous
* steps), favoring container instances with the fewest number of running tasks for this service.
*
*
*
*
*
*
* When the service scheduler stops running tasks, it attempts to maintain balance across the Availability Zones in
* your cluster using the following logic:
*
*
* -
*
* Sort the container instances by the largest number of running tasks for this service in the same Availability
* Zone as the instance. For example, if zone A has one running service task and zones B and C each have two,
* container instances in either zone B or C are considered optimal for termination.
*
*
* -
*
* Stop the task on a container instance in an optimal Availability Zone (based on the previous steps), favoring
* container instances with the largest number of running tasks for this service.
*
*
*
*
*
* You must have a service-linked role when you update any of the following service properties:
*
*
* -
*
* loadBalancers,
*
*
* -
*
* serviceRegistries
*
*
*
*
* For more information about the role see the CreateService request parameter role .
*
*
*
* This is a convenience which creates an instance of the {@link UpdateServiceRequest.Builder} avoiding the need to
* create one manually via {@link UpdateServiceRequest#builder()}
*
*
* @param updateServiceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.UpdateServiceRequest.Builder} to create a request.
* @return Result of the UpdateService operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws ServiceNotActiveException
* The specified service isn't active. You can't update a service that's inactive. If you have previously
* deleted a service, you can re-create it with CreateService.
* @throws PlatformUnknownException
* The specified platform version doesn't exist.
* @throws PlatformTaskDefinitionIncompatibilityException
* The specified platform version doesn't satisfy the required capabilities of the task definition.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws NamespaceNotFoundException
* The specified namespace wasn't found.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateService
* @see AWS API
* Documentation
*/
default UpdateServiceResponse updateService(Consumer updateServiceRequest)
throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException,
ServiceNotFoundException, ServiceNotActiveException, PlatformUnknownException,
PlatformTaskDefinitionIncompatibilityException, AccessDeniedException, NamespaceNotFoundException,
AwsServiceException, SdkClientException, EcsException {
return updateService(UpdateServiceRequest.builder().applyMutation(updateServiceRequest).build());
}
/**
*
* Modifies which task set in a service is the primary task set. Any parameters that are updated on the primary task
* set in a service will transition to the service. This is used when a service uses the EXTERNAL
* deployment controller type. For more information, see Amazon ECS Deployment
* Types in the Amazon Elastic Container Service Developer Guide.
*
*
* @param updateServicePrimaryTaskSetRequest
* @return Result of the UpdateServicePrimaryTaskSet operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws ServiceNotActiveException
* The specified service isn't active. You can't update a service that's inactive. If you have previously
* deleted a service, you can re-create it with CreateService.
* @throws TaskSetNotFoundException
* The specified task set wasn't found. You can view your available task sets with DescribeTaskSets.
* Task sets are specific to each cluster, service and Region.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateServicePrimaryTaskSet
* @see AWS API Documentation
*/
default UpdateServicePrimaryTaskSetResponse updateServicePrimaryTaskSet(
UpdateServicePrimaryTaskSetRequest updateServicePrimaryTaskSetRequest) throws ServerException, ClientException,
InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, ServiceNotFoundException,
ServiceNotActiveException, TaskSetNotFoundException, AccessDeniedException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Modifies which task set in a service is the primary task set. Any parameters that are updated on the primary task
* set in a service will transition to the service. This is used when a service uses the EXTERNAL
* deployment controller type. For more information, see Amazon ECS Deployment
* Types in the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link UpdateServicePrimaryTaskSetRequest.Builder}
* avoiding the need to create one manually via {@link UpdateServicePrimaryTaskSetRequest#builder()}
*
*
* @param updateServicePrimaryTaskSetRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.UpdateServicePrimaryTaskSetRequest.Builder} to create a
* request.
* @return Result of the UpdateServicePrimaryTaskSet operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws ServiceNotActiveException
* The specified service isn't active. You can't update a service that's inactive. If you have previously
* deleted a service, you can re-create it with CreateService.
* @throws TaskSetNotFoundException
* The specified task set wasn't found. You can view your available task sets with DescribeTaskSets.
* Task sets are specific to each cluster, service and Region.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateServicePrimaryTaskSet
* @see AWS API Documentation
*/
default UpdateServicePrimaryTaskSetResponse updateServicePrimaryTaskSet(
Consumer updateServicePrimaryTaskSetRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException,
ServiceNotFoundException, ServiceNotActiveException, TaskSetNotFoundException, AccessDeniedException,
AwsServiceException, SdkClientException, EcsException {
return updateServicePrimaryTaskSet(UpdateServicePrimaryTaskSetRequest.builder()
.applyMutation(updateServicePrimaryTaskSetRequest).build());
}
/**
*
* Updates the protection status of a task. You can set protectionEnabled to true to
* protect your task from termination during scale-in events from Service
* Autoscaling or deployments.
*
*
* Task-protection, by default, expires after 2 hours at which point Amazon ECS clears the
* protectionEnabled property making the task eligible for termination by a subsequent scale-in event.
*
*
* You can specify a custom expiration period for task protection from 1 minute to up to 2,880 minutes (48 hours).
* To specify the custom expiration period, set the expiresInMinutes property. The
* expiresInMinutes property is always reset when you invoke this operation for a task that already has
* protectionEnabled set to true. You can keep extending the protection expiration period
* of a task by invoking this operation repeatedly.
*
*
* To learn more about Amazon ECS task protection, see Task scale-in
* protection in the Amazon Elastic Container Service Developer Guide .
*
*
*
* This operation is only supported for tasks belonging to an Amazon ECS service. Invoking this operation for a
* standalone task will result in an TASK_NOT_VALID failure. For more information, see API failure
* reasons.
*
*
*
* If you prefer to set task protection from within the container, we recommend using the Task
* scale-in protection endpoint.
*
*
*
* @param updateTaskProtectionRequest
* @return Result of the UpdateTaskProtection operation returned by the service.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ResourceNotFoundException
* The specified resource wasn't found.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateTaskProtection
* @see AWS API
* Documentation
*/
default UpdateTaskProtectionResponse updateTaskProtection(UpdateTaskProtectionRequest updateTaskProtectionRequest)
throws AccessDeniedException, ClientException, ClusterNotFoundException, InvalidParameterException,
ResourceNotFoundException, ServerException, UnsupportedFeatureException, AwsServiceException, SdkClientException,
EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Updates the protection status of a task. You can set protectionEnabled to true to
* protect your task from termination during scale-in events from Service
* Autoscaling or deployments.
*
*
* Task-protection, by default, expires after 2 hours at which point Amazon ECS clears the
* protectionEnabled property making the task eligible for termination by a subsequent scale-in event.
*
*
* You can specify a custom expiration period for task protection from 1 minute to up to 2,880 minutes (48 hours).
* To specify the custom expiration period, set the expiresInMinutes property. The
* expiresInMinutes property is always reset when you invoke this operation for a task that already has
* protectionEnabled set to true. You can keep extending the protection expiration period
* of a task by invoking this operation repeatedly.
*
*
* To learn more about Amazon ECS task protection, see Task scale-in
* protection in the Amazon Elastic Container Service Developer Guide .
*
*
*
* This operation is only supported for tasks belonging to an Amazon ECS service. Invoking this operation for a
* standalone task will result in an TASK_NOT_VALID failure. For more information, see API failure
* reasons.
*
*
*
* If you prefer to set task protection from within the container, we recommend using the Task
* scale-in protection endpoint.
*
*
*
* This is a convenience which creates an instance of the {@link UpdateTaskProtectionRequest.Builder} avoiding the
* need to create one manually via {@link UpdateTaskProtectionRequest#builder()}
*
*
* @param updateTaskProtectionRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.UpdateTaskProtectionRequest.Builder} to create a request.
* @return Result of the UpdateTaskProtection operation returned by the service.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ResourceNotFoundException
* The specified resource wasn't found.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateTaskProtection
* @see AWS API
* Documentation
*/
default UpdateTaskProtectionResponse updateTaskProtection(
Consumer updateTaskProtectionRequest) throws AccessDeniedException,
ClientException, ClusterNotFoundException, InvalidParameterException, ResourceNotFoundException, ServerException,
UnsupportedFeatureException, AwsServiceException, SdkClientException, EcsException {
return updateTaskProtection(UpdateTaskProtectionRequest.builder().applyMutation(updateTaskProtectionRequest).build());
}
/**
*
* Modifies a task set. This is used when a service uses the EXTERNAL deployment controller type. For
* more information, see Amazon ECS Deployment
* Types in the Amazon Elastic Container Service Developer Guide.
*
*
* @param updateTaskSetRequest
* @return Result of the UpdateTaskSet operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws ServiceNotActiveException
* The specified service isn't active. You can't update a service that's inactive. If you have previously
* deleted a service, you can re-create it with CreateService.
* @throws TaskSetNotFoundException
* The specified task set wasn't found. You can view your available task sets with DescribeTaskSets.
* Task sets are specific to each cluster, service and Region.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateTaskSet
* @see AWS API
* Documentation
*/
default UpdateTaskSetResponse updateTaskSet(UpdateTaskSetRequest updateTaskSetRequest) throws ServerException,
ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException,
AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException, TaskSetNotFoundException,
AwsServiceException, SdkClientException, EcsException {
throw new UnsupportedOperationException();
}
/**
*
* Modifies a task set. This is used when a service uses the EXTERNAL deployment controller type. For
* more information, see Amazon ECS Deployment
* Types in the Amazon Elastic Container Service Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link UpdateTaskSetRequest.Builder} avoiding the need to
* create one manually via {@link UpdateTaskSetRequest#builder()}
*
*
* @param updateTaskSetRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.ecs.model.UpdateTaskSetRequest.Builder} to create a request.
* @return Result of the UpdateTaskSet operation returned by the service.
* @throws ServerException
* These errors are usually caused by a server issue.
* @throws ClientException
* These errors are usually caused by a client action. This client action might be using an action or
* resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be
* specifying an identifier that isn't valid.
* @throws InvalidParameterException
* The specified parameter isn't valid. Review the available parameters for the API request.
* @throws ClusterNotFoundException
* The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon
* ECS clusters are Region specific.
* @throws UnsupportedFeatureException
* The specified task isn't supported in this Region.
* @throws AccessDeniedException
* You don't have authorization to perform the requested action.
* @throws ServiceNotFoundException
* The specified service wasn't found. You can view your available services with ListServices. Amazon
* ECS services are cluster specific and Region specific.
* @throws ServiceNotActiveException
* The specified service isn't active. You can't update a service that's inactive. If you have previously
* deleted a service, you can re-create it with CreateService.
* @throws TaskSetNotFoundException
* The specified task set wasn't found. You can view your available task sets with DescribeTaskSets.
* Task sets are specific to each cluster, service and Region.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws EcsException
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample EcsClient.UpdateTaskSet
* @see AWS API
* Documentation
*/
default UpdateTaskSetResponse updateTaskSet(Consumer updateTaskSetRequest)
throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException,
UnsupportedFeatureException, AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException,
TaskSetNotFoundException, AwsServiceException, SdkClientException, EcsException {
return updateTaskSet(UpdateTaskSetRequest.builder().applyMutation(updateTaskSetRequest).build());
}
/**
* Create an instance of {@link EcsWaiter} using this client.
*
* Waiters created via this method are managed by the SDK and resources will be released when the service client is
* closed.
*
* @return an instance of {@link EcsWaiter}
*/
default EcsWaiter waiter() {
throw new UnsupportedOperationException();
}
/**
* Create a {@link EcsClient} with the region loaded from the
* {@link software.amazon.awssdk.regions.providers.DefaultAwsRegionProviderChain} and credentials loaded from the
* {@link software.amazon.awssdk.auth.credentials.DefaultCredentialsProvider}.
*/
static EcsClient create() {
return builder().build();
}
/**
* Create a builder that can be used to configure and create a {@link EcsClient}.
*/
static EcsClientBuilder builder() {
return new DefaultEcsClientBuilder();
}
static ServiceMetadata serviceMetadata() {
return ServiceMetadata.of(SERVICE_METADATA_ID);
}
@Override
default EcsServiceClientConfiguration serviceClientConfiguration() {
throw new UnsupportedOperationException();
}
}