software.amazon.awssdk.services.route53.Route53Client Maven / Gradle / Ivy
Show all versions of route53 Show documentation
/*
* Copyright Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package software.amazon.awssdk.services.route53;
import java.util.function.Consumer;
import software.amazon.awssdk.annotations.Generated;
import software.amazon.awssdk.annotations.SdkPublicApi;
import software.amazon.awssdk.annotations.ThreadSafe;
import software.amazon.awssdk.awscore.AwsClient;
import software.amazon.awssdk.awscore.exception.AwsServiceException;
import software.amazon.awssdk.core.exception.SdkClientException;
import software.amazon.awssdk.regions.ServiceMetadata;
import software.amazon.awssdk.services.route53.model.ActivateKeySigningKeyRequest;
import software.amazon.awssdk.services.route53.model.ActivateKeySigningKeyResponse;
import software.amazon.awssdk.services.route53.model.AssociateVpcWithHostedZoneRequest;
import software.amazon.awssdk.services.route53.model.AssociateVpcWithHostedZoneResponse;
import software.amazon.awssdk.services.route53.model.ChangeCidrCollectionRequest;
import software.amazon.awssdk.services.route53.model.ChangeCidrCollectionResponse;
import software.amazon.awssdk.services.route53.model.ChangeResourceRecordSetsRequest;
import software.amazon.awssdk.services.route53.model.ChangeResourceRecordSetsResponse;
import software.amazon.awssdk.services.route53.model.ChangeTagsForResourceRequest;
import software.amazon.awssdk.services.route53.model.ChangeTagsForResourceResponse;
import software.amazon.awssdk.services.route53.model.CidrBlockInUseException;
import software.amazon.awssdk.services.route53.model.CidrCollectionAlreadyExistsException;
import software.amazon.awssdk.services.route53.model.CidrCollectionInUseException;
import software.amazon.awssdk.services.route53.model.CidrCollectionVersionMismatchException;
import software.amazon.awssdk.services.route53.model.ConcurrentModificationException;
import software.amazon.awssdk.services.route53.model.ConflictingDomainExistsException;
import software.amazon.awssdk.services.route53.model.ConflictingTypesException;
import software.amazon.awssdk.services.route53.model.CreateCidrCollectionRequest;
import software.amazon.awssdk.services.route53.model.CreateCidrCollectionResponse;
import software.amazon.awssdk.services.route53.model.CreateHealthCheckRequest;
import software.amazon.awssdk.services.route53.model.CreateHealthCheckResponse;
import software.amazon.awssdk.services.route53.model.CreateHostedZoneRequest;
import software.amazon.awssdk.services.route53.model.CreateHostedZoneResponse;
import software.amazon.awssdk.services.route53.model.CreateKeySigningKeyRequest;
import software.amazon.awssdk.services.route53.model.CreateKeySigningKeyResponse;
import software.amazon.awssdk.services.route53.model.CreateQueryLoggingConfigRequest;
import software.amazon.awssdk.services.route53.model.CreateQueryLoggingConfigResponse;
import software.amazon.awssdk.services.route53.model.CreateReusableDelegationSetRequest;
import software.amazon.awssdk.services.route53.model.CreateReusableDelegationSetResponse;
import software.amazon.awssdk.services.route53.model.CreateTrafficPolicyInstanceRequest;
import software.amazon.awssdk.services.route53.model.CreateTrafficPolicyInstanceResponse;
import software.amazon.awssdk.services.route53.model.CreateTrafficPolicyRequest;
import software.amazon.awssdk.services.route53.model.CreateTrafficPolicyResponse;
import software.amazon.awssdk.services.route53.model.CreateTrafficPolicyVersionRequest;
import software.amazon.awssdk.services.route53.model.CreateTrafficPolicyVersionResponse;
import software.amazon.awssdk.services.route53.model.CreateVpcAssociationAuthorizationRequest;
import software.amazon.awssdk.services.route53.model.CreateVpcAssociationAuthorizationResponse;
import software.amazon.awssdk.services.route53.model.DeactivateKeySigningKeyRequest;
import software.amazon.awssdk.services.route53.model.DeactivateKeySigningKeyResponse;
import software.amazon.awssdk.services.route53.model.DelegationSetAlreadyCreatedException;
import software.amazon.awssdk.services.route53.model.DelegationSetAlreadyReusableException;
import software.amazon.awssdk.services.route53.model.DelegationSetInUseException;
import software.amazon.awssdk.services.route53.model.DelegationSetNotAvailableException;
import software.amazon.awssdk.services.route53.model.DelegationSetNotReusableException;
import software.amazon.awssdk.services.route53.model.DeleteCidrCollectionRequest;
import software.amazon.awssdk.services.route53.model.DeleteCidrCollectionResponse;
import software.amazon.awssdk.services.route53.model.DeleteHealthCheckRequest;
import software.amazon.awssdk.services.route53.model.DeleteHealthCheckResponse;
import software.amazon.awssdk.services.route53.model.DeleteHostedZoneRequest;
import software.amazon.awssdk.services.route53.model.DeleteHostedZoneResponse;
import software.amazon.awssdk.services.route53.model.DeleteKeySigningKeyRequest;
import software.amazon.awssdk.services.route53.model.DeleteKeySigningKeyResponse;
import software.amazon.awssdk.services.route53.model.DeleteQueryLoggingConfigRequest;
import software.amazon.awssdk.services.route53.model.DeleteQueryLoggingConfigResponse;
import software.amazon.awssdk.services.route53.model.DeleteReusableDelegationSetRequest;
import software.amazon.awssdk.services.route53.model.DeleteReusableDelegationSetResponse;
import software.amazon.awssdk.services.route53.model.DeleteTrafficPolicyInstanceRequest;
import software.amazon.awssdk.services.route53.model.DeleteTrafficPolicyInstanceResponse;
import software.amazon.awssdk.services.route53.model.DeleteTrafficPolicyRequest;
import software.amazon.awssdk.services.route53.model.DeleteTrafficPolicyResponse;
import software.amazon.awssdk.services.route53.model.DeleteVpcAssociationAuthorizationRequest;
import software.amazon.awssdk.services.route53.model.DeleteVpcAssociationAuthorizationResponse;
import software.amazon.awssdk.services.route53.model.DisableHostedZoneDnssecRequest;
import software.amazon.awssdk.services.route53.model.DisableHostedZoneDnssecResponse;
import software.amazon.awssdk.services.route53.model.DisassociateVpcFromHostedZoneRequest;
import software.amazon.awssdk.services.route53.model.DisassociateVpcFromHostedZoneResponse;
import software.amazon.awssdk.services.route53.model.DnssecNotFoundException;
import software.amazon.awssdk.services.route53.model.EnableHostedZoneDnssecRequest;
import software.amazon.awssdk.services.route53.model.EnableHostedZoneDnssecResponse;
import software.amazon.awssdk.services.route53.model.GetAccountLimitRequest;
import software.amazon.awssdk.services.route53.model.GetAccountLimitResponse;
import software.amazon.awssdk.services.route53.model.GetChangeRequest;
import software.amazon.awssdk.services.route53.model.GetChangeResponse;
import software.amazon.awssdk.services.route53.model.GetCheckerIpRangesRequest;
import software.amazon.awssdk.services.route53.model.GetCheckerIpRangesResponse;
import software.amazon.awssdk.services.route53.model.GetDnssecRequest;
import software.amazon.awssdk.services.route53.model.GetDnssecResponse;
import software.amazon.awssdk.services.route53.model.GetGeoLocationRequest;
import software.amazon.awssdk.services.route53.model.GetGeoLocationResponse;
import software.amazon.awssdk.services.route53.model.GetHealthCheckCountRequest;
import software.amazon.awssdk.services.route53.model.GetHealthCheckCountResponse;
import software.amazon.awssdk.services.route53.model.GetHealthCheckLastFailureReasonRequest;
import software.amazon.awssdk.services.route53.model.GetHealthCheckLastFailureReasonResponse;
import software.amazon.awssdk.services.route53.model.GetHealthCheckRequest;
import software.amazon.awssdk.services.route53.model.GetHealthCheckResponse;
import software.amazon.awssdk.services.route53.model.GetHealthCheckStatusRequest;
import software.amazon.awssdk.services.route53.model.GetHealthCheckStatusResponse;
import software.amazon.awssdk.services.route53.model.GetHostedZoneCountRequest;
import software.amazon.awssdk.services.route53.model.GetHostedZoneCountResponse;
import software.amazon.awssdk.services.route53.model.GetHostedZoneLimitRequest;
import software.amazon.awssdk.services.route53.model.GetHostedZoneLimitResponse;
import software.amazon.awssdk.services.route53.model.GetHostedZoneRequest;
import software.amazon.awssdk.services.route53.model.GetHostedZoneResponse;
import software.amazon.awssdk.services.route53.model.GetQueryLoggingConfigRequest;
import software.amazon.awssdk.services.route53.model.GetQueryLoggingConfigResponse;
import software.amazon.awssdk.services.route53.model.GetReusableDelegationSetLimitRequest;
import software.amazon.awssdk.services.route53.model.GetReusableDelegationSetLimitResponse;
import software.amazon.awssdk.services.route53.model.GetReusableDelegationSetRequest;
import software.amazon.awssdk.services.route53.model.GetReusableDelegationSetResponse;
import software.amazon.awssdk.services.route53.model.GetTrafficPolicyInstanceCountRequest;
import software.amazon.awssdk.services.route53.model.GetTrafficPolicyInstanceCountResponse;
import software.amazon.awssdk.services.route53.model.GetTrafficPolicyInstanceRequest;
import software.amazon.awssdk.services.route53.model.GetTrafficPolicyInstanceResponse;
import software.amazon.awssdk.services.route53.model.GetTrafficPolicyRequest;
import software.amazon.awssdk.services.route53.model.GetTrafficPolicyResponse;
import software.amazon.awssdk.services.route53.model.HealthCheckAlreadyExistsException;
import software.amazon.awssdk.services.route53.model.HealthCheckVersionMismatchException;
import software.amazon.awssdk.services.route53.model.HostedZoneAlreadyExistsException;
import software.amazon.awssdk.services.route53.model.HostedZoneNotEmptyException;
import software.amazon.awssdk.services.route53.model.HostedZoneNotFoundException;
import software.amazon.awssdk.services.route53.model.HostedZoneNotPrivateException;
import software.amazon.awssdk.services.route53.model.HostedZonePartiallyDelegatedException;
import software.amazon.awssdk.services.route53.model.IncompatibleVersionException;
import software.amazon.awssdk.services.route53.model.InsufficientCloudWatchLogsResourcePolicyException;
import software.amazon.awssdk.services.route53.model.InvalidArgumentException;
import software.amazon.awssdk.services.route53.model.InvalidChangeBatchException;
import software.amazon.awssdk.services.route53.model.InvalidDomainNameException;
import software.amazon.awssdk.services.route53.model.InvalidInputException;
import software.amazon.awssdk.services.route53.model.InvalidKeySigningKeyNameException;
import software.amazon.awssdk.services.route53.model.InvalidKeySigningKeyStatusException;
import software.amazon.awssdk.services.route53.model.InvalidKmsArnException;
import software.amazon.awssdk.services.route53.model.InvalidPaginationTokenException;
import software.amazon.awssdk.services.route53.model.InvalidSigningStatusException;
import software.amazon.awssdk.services.route53.model.InvalidTrafficPolicyDocumentException;
import software.amazon.awssdk.services.route53.model.InvalidVpcIdException;
import software.amazon.awssdk.services.route53.model.KeySigningKeyAlreadyExistsException;
import software.amazon.awssdk.services.route53.model.KeySigningKeyInParentDsRecordException;
import software.amazon.awssdk.services.route53.model.KeySigningKeyInUseException;
import software.amazon.awssdk.services.route53.model.KeySigningKeyWithActiveStatusNotFoundException;
import software.amazon.awssdk.services.route53.model.LastVpcAssociationException;
import software.amazon.awssdk.services.route53.model.LimitsExceededException;
import software.amazon.awssdk.services.route53.model.ListCidrBlocksRequest;
import software.amazon.awssdk.services.route53.model.ListCidrBlocksResponse;
import software.amazon.awssdk.services.route53.model.ListCidrCollectionsRequest;
import software.amazon.awssdk.services.route53.model.ListCidrCollectionsResponse;
import software.amazon.awssdk.services.route53.model.ListCidrLocationsRequest;
import software.amazon.awssdk.services.route53.model.ListCidrLocationsResponse;
import software.amazon.awssdk.services.route53.model.ListGeoLocationsRequest;
import software.amazon.awssdk.services.route53.model.ListGeoLocationsResponse;
import software.amazon.awssdk.services.route53.model.ListHealthChecksRequest;
import software.amazon.awssdk.services.route53.model.ListHealthChecksResponse;
import software.amazon.awssdk.services.route53.model.ListHostedZonesByNameRequest;
import software.amazon.awssdk.services.route53.model.ListHostedZonesByNameResponse;
import software.amazon.awssdk.services.route53.model.ListHostedZonesByVpcRequest;
import software.amazon.awssdk.services.route53.model.ListHostedZonesByVpcResponse;
import software.amazon.awssdk.services.route53.model.ListHostedZonesRequest;
import software.amazon.awssdk.services.route53.model.ListHostedZonesResponse;
import software.amazon.awssdk.services.route53.model.ListQueryLoggingConfigsRequest;
import software.amazon.awssdk.services.route53.model.ListQueryLoggingConfigsResponse;
import software.amazon.awssdk.services.route53.model.ListResourceRecordSetsRequest;
import software.amazon.awssdk.services.route53.model.ListResourceRecordSetsResponse;
import software.amazon.awssdk.services.route53.model.ListReusableDelegationSetsRequest;
import software.amazon.awssdk.services.route53.model.ListReusableDelegationSetsResponse;
import software.amazon.awssdk.services.route53.model.ListTagsForResourceRequest;
import software.amazon.awssdk.services.route53.model.ListTagsForResourceResponse;
import software.amazon.awssdk.services.route53.model.ListTagsForResourcesRequest;
import software.amazon.awssdk.services.route53.model.ListTagsForResourcesResponse;
import software.amazon.awssdk.services.route53.model.ListTrafficPoliciesRequest;
import software.amazon.awssdk.services.route53.model.ListTrafficPoliciesResponse;
import software.amazon.awssdk.services.route53.model.ListTrafficPolicyInstancesByHostedZoneRequest;
import software.amazon.awssdk.services.route53.model.ListTrafficPolicyInstancesByHostedZoneResponse;
import software.amazon.awssdk.services.route53.model.ListTrafficPolicyInstancesByPolicyRequest;
import software.amazon.awssdk.services.route53.model.ListTrafficPolicyInstancesByPolicyResponse;
import software.amazon.awssdk.services.route53.model.ListTrafficPolicyInstancesRequest;
import software.amazon.awssdk.services.route53.model.ListTrafficPolicyInstancesResponse;
import software.amazon.awssdk.services.route53.model.ListTrafficPolicyVersionsRequest;
import software.amazon.awssdk.services.route53.model.ListTrafficPolicyVersionsResponse;
import software.amazon.awssdk.services.route53.model.ListVpcAssociationAuthorizationsRequest;
import software.amazon.awssdk.services.route53.model.ListVpcAssociationAuthorizationsResponse;
import software.amazon.awssdk.services.route53.model.NoSuchChangeException;
import software.amazon.awssdk.services.route53.model.NoSuchCidrCollectionException;
import software.amazon.awssdk.services.route53.model.NoSuchCidrLocationException;
import software.amazon.awssdk.services.route53.model.NoSuchCloudWatchLogsLogGroupException;
import software.amazon.awssdk.services.route53.model.NoSuchDelegationSetException;
import software.amazon.awssdk.services.route53.model.NoSuchGeoLocationException;
import software.amazon.awssdk.services.route53.model.NoSuchHealthCheckException;
import software.amazon.awssdk.services.route53.model.NoSuchHostedZoneException;
import software.amazon.awssdk.services.route53.model.NoSuchKeySigningKeyException;
import software.amazon.awssdk.services.route53.model.NoSuchQueryLoggingConfigException;
import software.amazon.awssdk.services.route53.model.NoSuchTrafficPolicyException;
import software.amazon.awssdk.services.route53.model.NoSuchTrafficPolicyInstanceException;
import software.amazon.awssdk.services.route53.model.NotAuthorizedException;
import software.amazon.awssdk.services.route53.model.PriorRequestNotCompleteException;
import software.amazon.awssdk.services.route53.model.PublicZoneVpcAssociationException;
import software.amazon.awssdk.services.route53.model.QueryLoggingConfigAlreadyExistsException;
import software.amazon.awssdk.services.route53.model.Route53Exception;
import software.amazon.awssdk.services.route53.model.TestDnsAnswerRequest;
import software.amazon.awssdk.services.route53.model.TestDnsAnswerResponse;
import software.amazon.awssdk.services.route53.model.ThrottlingException;
import software.amazon.awssdk.services.route53.model.TooManyHealthChecksException;
import software.amazon.awssdk.services.route53.model.TooManyHostedZonesException;
import software.amazon.awssdk.services.route53.model.TooManyKeySigningKeysException;
import software.amazon.awssdk.services.route53.model.TooManyTrafficPoliciesException;
import software.amazon.awssdk.services.route53.model.TooManyTrafficPolicyInstancesException;
import software.amazon.awssdk.services.route53.model.TooManyTrafficPolicyVersionsForCurrentPolicyException;
import software.amazon.awssdk.services.route53.model.TooManyVpcAssociationAuthorizationsException;
import software.amazon.awssdk.services.route53.model.TrafficPolicyAlreadyExistsException;
import software.amazon.awssdk.services.route53.model.TrafficPolicyInUseException;
import software.amazon.awssdk.services.route53.model.TrafficPolicyInstanceAlreadyExistsException;
import software.amazon.awssdk.services.route53.model.UpdateHealthCheckRequest;
import software.amazon.awssdk.services.route53.model.UpdateHealthCheckResponse;
import software.amazon.awssdk.services.route53.model.UpdateHostedZoneCommentRequest;
import software.amazon.awssdk.services.route53.model.UpdateHostedZoneCommentResponse;
import software.amazon.awssdk.services.route53.model.UpdateTrafficPolicyCommentRequest;
import software.amazon.awssdk.services.route53.model.UpdateTrafficPolicyCommentResponse;
import software.amazon.awssdk.services.route53.model.UpdateTrafficPolicyInstanceRequest;
import software.amazon.awssdk.services.route53.model.UpdateTrafficPolicyInstanceResponse;
import software.amazon.awssdk.services.route53.model.VpcAssociationAuthorizationNotFoundException;
import software.amazon.awssdk.services.route53.model.VpcAssociationNotFoundException;
import software.amazon.awssdk.services.route53.paginators.ListCidrBlocksIterable;
import software.amazon.awssdk.services.route53.paginators.ListCidrCollectionsIterable;
import software.amazon.awssdk.services.route53.paginators.ListCidrLocationsIterable;
import software.amazon.awssdk.services.route53.paginators.ListHealthChecksIterable;
import software.amazon.awssdk.services.route53.paginators.ListHostedZonesIterable;
import software.amazon.awssdk.services.route53.paginators.ListQueryLoggingConfigsIterable;
import software.amazon.awssdk.services.route53.paginators.ListResourceRecordSetsIterable;
import software.amazon.awssdk.services.route53.waiters.Route53Waiter;
/**
* Service client for accessing Route 53. This can be created using the static {@link #builder()} method.
*
*
* Amazon Route 53 is a highly available and scalable Domain Name System (DNS) web service.
*
*
* You can use Route 53 to:
*
*
* -
*
* Register domain names.
*
*
* For more information, see How domain
* registration works.
*
*
* -
*
* Route internet traffic to the resources for your domain
*
*
* For more information, see How internet traffic is
* routed to your website or web application.
*
*
* -
*
* Check the health of your resources.
*
*
* For more information, see How Route 53 checks the
* health of your resources.
*
*
*
*/
@Generated("software.amazon.awssdk:codegen")
@SdkPublicApi
@ThreadSafe
public interface Route53Client extends AwsClient {
String SERVICE_NAME = "route53";
/**
* Value for looking up the service's metadata from the
* {@link software.amazon.awssdk.regions.ServiceMetadataProvider}.
*/
String SERVICE_METADATA_ID = "route53";
/**
*
* Activates a key-signing key (KSK) so that it can be used for signing by DNSSEC. This operation changes the KSK
* status to ACTIVE.
*
*
* @param activateKeySigningKeyRequest
* @return Result of the ActivateKeySigningKey operation returned by the service.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws NoSuchKeySigningKeyException
* The specified key-signing key (KSK) doesn't exist.
* @throws InvalidKeySigningKeyStatusException
* The key-signing key (KSK) status isn't valid or another KSK has the status INTERNAL_FAILURE.
* @throws InvalidSigningStatusException
* Your hosted zone status isn't valid for this operation. In the hosted zone, change the status to enable
* DNSSEC or disable DNSSEC.
* @throws InvalidKmsArnException
* The KeyManagementServiceArn that you specified isn't valid to use with DNSSEC signing.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ActivateKeySigningKey
* @see AWS
* API Documentation
*/
default ActivateKeySigningKeyResponse activateKeySigningKey(ActivateKeySigningKeyRequest activateKeySigningKeyRequest)
throws ConcurrentModificationException, NoSuchKeySigningKeyException, InvalidKeySigningKeyStatusException,
InvalidSigningStatusException, InvalidKmsArnException, InvalidInputException, AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Activates a key-signing key (KSK) so that it can be used for signing by DNSSEC. This operation changes the KSK
* status to ACTIVE.
*
*
*
* This is a convenience which creates an instance of the {@link ActivateKeySigningKeyRequest.Builder} avoiding the
* need to create one manually via {@link ActivateKeySigningKeyRequest#builder()}
*
*
* @param activateKeySigningKeyRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ActivateKeySigningKeyRequest.Builder} to create a
* request.
* @return Result of the ActivateKeySigningKey operation returned by the service.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws NoSuchKeySigningKeyException
* The specified key-signing key (KSK) doesn't exist.
* @throws InvalidKeySigningKeyStatusException
* The key-signing key (KSK) status isn't valid or another KSK has the status INTERNAL_FAILURE.
* @throws InvalidSigningStatusException
* Your hosted zone status isn't valid for this operation. In the hosted zone, change the status to enable
* DNSSEC or disable DNSSEC.
* @throws InvalidKmsArnException
* The KeyManagementServiceArn that you specified isn't valid to use with DNSSEC signing.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ActivateKeySigningKey
* @see AWS
* API Documentation
*/
default ActivateKeySigningKeyResponse activateKeySigningKey(
Consumer activateKeySigningKeyRequest) throws ConcurrentModificationException,
NoSuchKeySigningKeyException, InvalidKeySigningKeyStatusException, InvalidSigningStatusException,
InvalidKmsArnException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return activateKeySigningKey(ActivateKeySigningKeyRequest.builder().applyMutation(activateKeySigningKeyRequest).build());
}
/**
*
* Associates an Amazon VPC with a private hosted zone.
*
*
*
* To perform the association, the VPC and the private hosted zone must already exist. You can't convert a public
* hosted zone into a private hosted zone.
*
*
*
* If you want to associate a VPC that was created by using one Amazon Web Services account with a private hosted
* zone that was created by using a different account, the Amazon Web Services account that created the private
* hosted zone must first submit a CreateVPCAssociationAuthorization request. Then the account that
* created the VPC must submit an AssociateVPCWithHostedZone request.
*
*
*
* When granting access, the hosted zone and the Amazon VPC must belong to the same partition. A partition is a
* group of Amazon Web Services Regions. Each Amazon Web Services account is scoped to one partition.
*
*
* The following are the supported partitions:
*
*
* -
*
* aws - Amazon Web Services Regions
*
*
* -
*
* aws-cn - China Regions
*
*
* -
*
* aws-us-gov - Amazon Web Services GovCloud (US) Region
*
*
*
*
* For more information, see Access Management in the
* Amazon Web Services General Reference.
*
*
*
* @param associateVpcWithHostedZoneRequest
* A complex type that contains information about the request to associate a VPC with a private hosted zone.
* @return Result of the AssociateVPCWithHostedZone operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws NotAuthorizedException
* Associating the specified VPC with the specified hosted zone has not been authorized.
* @throws InvalidVpcIdException
* The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access
* this VPC.
* @throws InvalidInputException
* The input is not valid.
* @throws PublicZoneVpcAssociationException
* You're trying to associate a VPC with a public hosted zone. Amazon Route 53 doesn't support associating a
* VPC with a public hosted zone.
* @throws ConflictingDomainExistsException
* The cause of this error depends on the operation that you're performing:
*
* -
*
* Create a public hosted zone: Two hosted zones that have the same name or that have a parent/child
* relationship (example.com and test.example.com) can't have any common name servers. You tried to create a
* hosted zone that has the same name as an existing hosted zone or that's the parent or child of an
* existing hosted zone, and you specified a delegation set that shares one or more name servers with the
* existing hosted zone. For more information, see CreateReusableDelegationSet.
*
*
* -
*
* Create a private hosted zone: A hosted zone with the specified name already exists and is already
* associated with the Amazon VPC that you specified.
*
*
* -
*
* Associate VPCs with a private hosted zone: The VPC that you specified is already associated with
* another hosted zone that has the same name.
*
*
* @throws LimitsExceededException
* This operation can't be completed because the current account has reached the limit on the resource you
* are trying to create. To request a higher limit, create a
* case with the Amazon Web Services Support Center.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.AssociateVPCWithHostedZone
* @see AWS API Documentation
*/
default AssociateVpcWithHostedZoneResponse associateVPCWithHostedZone(
AssociateVpcWithHostedZoneRequest associateVpcWithHostedZoneRequest) throws NoSuchHostedZoneException,
NotAuthorizedException, InvalidVpcIdException, InvalidInputException, PublicZoneVpcAssociationException,
ConflictingDomainExistsException, LimitsExceededException, PriorRequestNotCompleteException, AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Associates an Amazon VPC with a private hosted zone.
*
*
*
* To perform the association, the VPC and the private hosted zone must already exist. You can't convert a public
* hosted zone into a private hosted zone.
*
*
*
* If you want to associate a VPC that was created by using one Amazon Web Services account with a private hosted
* zone that was created by using a different account, the Amazon Web Services account that created the private
* hosted zone must first submit a CreateVPCAssociationAuthorization request. Then the account that
* created the VPC must submit an AssociateVPCWithHostedZone request.
*
*
*
* When granting access, the hosted zone and the Amazon VPC must belong to the same partition. A partition is a
* group of Amazon Web Services Regions. Each Amazon Web Services account is scoped to one partition.
*
*
* The following are the supported partitions:
*
*
* -
*
* aws - Amazon Web Services Regions
*
*
* -
*
* aws-cn - China Regions
*
*
* -
*
* aws-us-gov - Amazon Web Services GovCloud (US) Region
*
*
*
*
* For more information, see Access Management in the
* Amazon Web Services General Reference.
*
*
*
* This is a convenience which creates an instance of the {@link AssociateVpcWithHostedZoneRequest.Builder} avoiding
* the need to create one manually via {@link AssociateVpcWithHostedZoneRequest#builder()}
*
*
* @param associateVpcWithHostedZoneRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.AssociateVpcWithHostedZoneRequest.Builder} to create
* a request. A complex type that contains information about the request to associate a VPC with a private
* hosted zone.
* @return Result of the AssociateVPCWithHostedZone operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws NotAuthorizedException
* Associating the specified VPC with the specified hosted zone has not been authorized.
* @throws InvalidVpcIdException
* The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access
* this VPC.
* @throws InvalidInputException
* The input is not valid.
* @throws PublicZoneVpcAssociationException
* You're trying to associate a VPC with a public hosted zone. Amazon Route 53 doesn't support associating a
* VPC with a public hosted zone.
* @throws ConflictingDomainExistsException
* The cause of this error depends on the operation that you're performing:
*
* -
*
* Create a public hosted zone: Two hosted zones that have the same name or that have a parent/child
* relationship (example.com and test.example.com) can't have any common name servers. You tried to create a
* hosted zone that has the same name as an existing hosted zone or that's the parent or child of an
* existing hosted zone, and you specified a delegation set that shares one or more name servers with the
* existing hosted zone. For more information, see CreateReusableDelegationSet.
*
*
* -
*
* Create a private hosted zone: A hosted zone with the specified name already exists and is already
* associated with the Amazon VPC that you specified.
*
*
* -
*
* Associate VPCs with a private hosted zone: The VPC that you specified is already associated with
* another hosted zone that has the same name.
*
*
* @throws LimitsExceededException
* This operation can't be completed because the current account has reached the limit on the resource you
* are trying to create. To request a higher limit, create a
* case with the Amazon Web Services Support Center.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.AssociateVPCWithHostedZone
* @see AWS API Documentation
*/
default AssociateVpcWithHostedZoneResponse associateVPCWithHostedZone(
Consumer associateVpcWithHostedZoneRequest)
throws NoSuchHostedZoneException, NotAuthorizedException, InvalidVpcIdException, InvalidInputException,
PublicZoneVpcAssociationException, ConflictingDomainExistsException, LimitsExceededException,
PriorRequestNotCompleteException, AwsServiceException, SdkClientException, Route53Exception {
return associateVPCWithHostedZone(AssociateVpcWithHostedZoneRequest.builder()
.applyMutation(associateVpcWithHostedZoneRequest).build());
}
/**
*
* Creates, changes, or deletes CIDR blocks within a collection. Contains authoritative IP information mapping
* blocks to one or multiple locations.
*
*
* A change request can update multiple locations in a collection at a time, which is helpful if you want to move
* one or more CIDR blocks from one location to another in one transaction, without downtime.
*
*
* Limits
*
*
* The max number of CIDR blocks included in the request is 1000. As a result, big updates require multiple API
* calls.
*
*
* PUT and DELETE_IF_EXISTS
*
*
* Use ChangeCidrCollection to perform the following actions:
*
*
* -
*
* PUT: Create a CIDR block within the specified collection.
*
*
* -
*
* DELETE_IF_EXISTS: Delete an existing CIDR block from the collection.
*
*
*
*
* @param changeCidrCollectionRequest
* @return Result of the ChangeCidrCollection operation returned by the service.
* @throws NoSuchCidrCollectionException
* The CIDR collection you specified, doesn't exist.
* @throws CidrCollectionVersionMismatchException
* The CIDR collection version you provided, doesn't match the one in the ListCidrCollections
* operation.
* @throws InvalidInputException
* The input is not valid.
* @throws CidrBlockInUseException
* This CIDR block is already in use.
* @throws LimitsExceededException
* This operation can't be completed because the current account has reached the limit on the resource you
* are trying to create. To request a higher limit, create a
* case with the Amazon Web Services Support Center.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ChangeCidrCollection
* @see AWS
* API Documentation
*/
default ChangeCidrCollectionResponse changeCidrCollection(ChangeCidrCollectionRequest changeCidrCollectionRequest)
throws NoSuchCidrCollectionException, CidrCollectionVersionMismatchException, InvalidInputException,
CidrBlockInUseException, LimitsExceededException, ConcurrentModificationException, AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Creates, changes, or deletes CIDR blocks within a collection. Contains authoritative IP information mapping
* blocks to one or multiple locations.
*
*
* A change request can update multiple locations in a collection at a time, which is helpful if you want to move
* one or more CIDR blocks from one location to another in one transaction, without downtime.
*
*
* Limits
*
*
* The max number of CIDR blocks included in the request is 1000. As a result, big updates require multiple API
* calls.
*
*
* PUT and DELETE_IF_EXISTS
*
*
* Use ChangeCidrCollection to perform the following actions:
*
*
* -
*
* PUT: Create a CIDR block within the specified collection.
*
*
* -
*
* DELETE_IF_EXISTS: Delete an existing CIDR block from the collection.
*
*
*
*
*
* This is a convenience which creates an instance of the {@link ChangeCidrCollectionRequest.Builder} avoiding the
* need to create one manually via {@link ChangeCidrCollectionRequest#builder()}
*
*
* @param changeCidrCollectionRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ChangeCidrCollectionRequest.Builder} to create a
* request.
* @return Result of the ChangeCidrCollection operation returned by the service.
* @throws NoSuchCidrCollectionException
* The CIDR collection you specified, doesn't exist.
* @throws CidrCollectionVersionMismatchException
* The CIDR collection version you provided, doesn't match the one in the ListCidrCollections
* operation.
* @throws InvalidInputException
* The input is not valid.
* @throws CidrBlockInUseException
* This CIDR block is already in use.
* @throws LimitsExceededException
* This operation can't be completed because the current account has reached the limit on the resource you
* are trying to create. To request a higher limit, create a
* case with the Amazon Web Services Support Center.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ChangeCidrCollection
* @see AWS
* API Documentation
*/
default ChangeCidrCollectionResponse changeCidrCollection(
Consumer changeCidrCollectionRequest) throws NoSuchCidrCollectionException,
CidrCollectionVersionMismatchException, InvalidInputException, CidrBlockInUseException, LimitsExceededException,
ConcurrentModificationException, AwsServiceException, SdkClientException, Route53Exception {
return changeCidrCollection(ChangeCidrCollectionRequest.builder().applyMutation(changeCidrCollectionRequest).build());
}
/**
*
* Creates, changes, or deletes a resource record set, which contains authoritative DNS information for a specified
* domain name or subdomain name. For example, you can use ChangeResourceRecordSets to create a
* resource record set that routes traffic for test.example.com to a web server that has an IP address of
* 192.0.2.44.
*
*
* Deleting Resource Record Sets
*
*
* To delete a resource record set, you must specify all the same values that you specified when you created it.
*
*
* Change Batches and Transactional Changes
*
*
* The request body must include a document with a ChangeResourceRecordSetsRequest element. The request
* body contains a list of change items, known as a change batch. Change batches are considered transactional
* changes. Route 53 validates the changes in the request and then either makes all or none of the changes in the
* change batch request. This ensures that DNS routing isn't adversely affected by partial changes to the resource
* record sets in a hosted zone.
*
*
* For example, suppose a change batch request contains two changes: it deletes the CNAME resource
* record set for www.example.com and creates an alias resource record set for www.example.com. If validation for
* both records succeeds, Route 53 deletes the first resource record set and creates the second resource record set
* in a single operation. If validation for either the DELETE or the CREATE action fails,
* then the request is canceled, and the original CNAME record continues to exist.
*
*
*
* If you try to delete the same resource record set more than once in a single change batch, Route 53 returns an
* InvalidChangeBatch error.
*
*
*
* Traffic Flow
*
*
* To create resource record sets for complex routing configurations, use either the traffic flow visual editor in
* the Route 53 console or the API actions for traffic policies and traffic policy instances. Save the configuration
* as a traffic policy, then associate the traffic policy with one or more domain names (such as example.com) or
* subdomain names (such as www.example.com), in the same hosted zone or in multiple hosted zones. You can roll back
* the updates if the new configuration isn't performing as expected. For more information, see Using Traffic Flow to Route
* DNS Traffic in the Amazon Route 53 Developer Guide.
*
*
* Create, Delete, and Upsert
*
*
* Use ChangeResourceRecordsSetsRequest to perform the following actions:
*
*
* -
*
* CREATE: Creates a resource record set that has the specified values.
*
*
* -
*
* DELETE: Deletes an existing resource record set that has the specified values.
*
*
* -
*
* UPSERT: If a resource set doesn't exist, Route 53 creates it. If a resource set exists Route 53
* updates it with the values in the request.
*
*
*
*
* Syntaxes for Creating, Updating, and Deleting Resource Record Sets
*
*
* The syntax for a request depends on the type of resource record set that you want to create, delete, or update,
* such as weighted, alias, or failover. The XML elements in your request must appear in the order listed in the
* syntax.
*
*
* For an example for each type of resource record set, see "Examples."
*
*
* Don't refer to the syntax in the "Parameter Syntax" section, which includes all of the elements for every kind of
* resource record set that you can create, delete, or update by using ChangeResourceRecordSets.
*
*
* Change Propagation to Route 53 DNS Servers
*
*
* When you submit a ChangeResourceRecordSets request, Route 53 propagates your changes to all of the
* Route 53 authoritative DNS servers managing the hosted zone. While your changes are propagating,
* GetChange returns a status of PENDING. When propagation is complete,
* GetChange returns a status of INSYNC. Changes generally propagate to all Route 53 name
* servers managing the hosted zone within 60 seconds. For more information, see GetChange.
*
*
* Limits on ChangeResourceRecordSets Requests
*
*
* For information about the limits on a ChangeResourceRecordSets request, see Limits in the Amazon
* Route 53 Developer Guide.
*
*
* @param changeResourceRecordSetsRequest
* A complex type that contains change information for the resource record set.
* @return Result of the ChangeResourceRecordSets operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws InvalidChangeBatchException
* This exception contains a list of messages that might contain one or more error messages. Each error
* message indicates one error in the change batch.
* @throws InvalidInputException
* The input is not valid.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ChangeResourceRecordSets
* @see AWS API Documentation
*/
default ChangeResourceRecordSetsResponse changeResourceRecordSets(
ChangeResourceRecordSetsRequest changeResourceRecordSetsRequest) throws NoSuchHostedZoneException,
NoSuchHealthCheckException, InvalidChangeBatchException, InvalidInputException, PriorRequestNotCompleteException,
AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Creates, changes, or deletes a resource record set, which contains authoritative DNS information for a specified
* domain name or subdomain name. For example, you can use ChangeResourceRecordSets to create a
* resource record set that routes traffic for test.example.com to a web server that has an IP address of
* 192.0.2.44.
*
*
* Deleting Resource Record Sets
*
*
* To delete a resource record set, you must specify all the same values that you specified when you created it.
*
*
* Change Batches and Transactional Changes
*
*
* The request body must include a document with a ChangeResourceRecordSetsRequest element. The request
* body contains a list of change items, known as a change batch. Change batches are considered transactional
* changes. Route 53 validates the changes in the request and then either makes all or none of the changes in the
* change batch request. This ensures that DNS routing isn't adversely affected by partial changes to the resource
* record sets in a hosted zone.
*
*
* For example, suppose a change batch request contains two changes: it deletes the CNAME resource
* record set for www.example.com and creates an alias resource record set for www.example.com. If validation for
* both records succeeds, Route 53 deletes the first resource record set and creates the second resource record set
* in a single operation. If validation for either the DELETE or the CREATE action fails,
* then the request is canceled, and the original CNAME record continues to exist.
*
*
*
* If you try to delete the same resource record set more than once in a single change batch, Route 53 returns an
* InvalidChangeBatch error.
*
*
*
* Traffic Flow
*
*
* To create resource record sets for complex routing configurations, use either the traffic flow visual editor in
* the Route 53 console or the API actions for traffic policies and traffic policy instances. Save the configuration
* as a traffic policy, then associate the traffic policy with one or more domain names (such as example.com) or
* subdomain names (such as www.example.com), in the same hosted zone or in multiple hosted zones. You can roll back
* the updates if the new configuration isn't performing as expected. For more information, see Using Traffic Flow to Route
* DNS Traffic in the Amazon Route 53 Developer Guide.
*
*
* Create, Delete, and Upsert
*
*
* Use ChangeResourceRecordsSetsRequest to perform the following actions:
*
*
* -
*
* CREATE: Creates a resource record set that has the specified values.
*
*
* -
*
* DELETE: Deletes an existing resource record set that has the specified values.
*
*
* -
*
* UPSERT: If a resource set doesn't exist, Route 53 creates it. If a resource set exists Route 53
* updates it with the values in the request.
*
*
*
*
* Syntaxes for Creating, Updating, and Deleting Resource Record Sets
*
*
* The syntax for a request depends on the type of resource record set that you want to create, delete, or update,
* such as weighted, alias, or failover. The XML elements in your request must appear in the order listed in the
* syntax.
*
*
* For an example for each type of resource record set, see "Examples."
*
*
* Don't refer to the syntax in the "Parameter Syntax" section, which includes all of the elements for every kind of
* resource record set that you can create, delete, or update by using ChangeResourceRecordSets.
*
*
* Change Propagation to Route 53 DNS Servers
*
*
* When you submit a ChangeResourceRecordSets request, Route 53 propagates your changes to all of the
* Route 53 authoritative DNS servers managing the hosted zone. While your changes are propagating,
* GetChange returns a status of PENDING. When propagation is complete,
* GetChange returns a status of INSYNC. Changes generally propagate to all Route 53 name
* servers managing the hosted zone within 60 seconds. For more information, see GetChange.
*
*
* Limits on ChangeResourceRecordSets Requests
*
*
* For information about the limits on a ChangeResourceRecordSets request, see Limits in the Amazon
* Route 53 Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link ChangeResourceRecordSetsRequest.Builder} avoiding
* the need to create one manually via {@link ChangeResourceRecordSetsRequest#builder()}
*
*
* @param changeResourceRecordSetsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ChangeResourceRecordSetsRequest.Builder} to create a
* request. A complex type that contains change information for the resource record set.
* @return Result of the ChangeResourceRecordSets operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws InvalidChangeBatchException
* This exception contains a list of messages that might contain one or more error messages. Each error
* message indicates one error in the change batch.
* @throws InvalidInputException
* The input is not valid.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ChangeResourceRecordSets
* @see AWS API Documentation
*/
default ChangeResourceRecordSetsResponse changeResourceRecordSets(
Consumer changeResourceRecordSetsRequest) throws NoSuchHostedZoneException,
NoSuchHealthCheckException, InvalidChangeBatchException, InvalidInputException, PriorRequestNotCompleteException,
AwsServiceException, SdkClientException, Route53Exception {
return changeResourceRecordSets(ChangeResourceRecordSetsRequest.builder().applyMutation(changeResourceRecordSetsRequest)
.build());
}
/**
*
* Adds, edits, or deletes tags for a health check or a hosted zone.
*
*
* For information about using tags for cost allocation, see Using Cost Allocation
* Tags in the Billing and Cost Management User Guide.
*
*
* @param changeTagsForResourceRequest
* A complex type that contains information about the tags that you want to add, edit, or delete.
* @return Result of the ChangeTagsForResource operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws ThrottlingException
* The limit on the number of requests per second was exceeded.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ChangeTagsForResource
* @see AWS
* API Documentation
*/
default ChangeTagsForResourceResponse changeTagsForResource(ChangeTagsForResourceRequest changeTagsForResourceRequest)
throws InvalidInputException, NoSuchHealthCheckException, NoSuchHostedZoneException,
PriorRequestNotCompleteException, ThrottlingException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Adds, edits, or deletes tags for a health check or a hosted zone.
*
*
* For information about using tags for cost allocation, see Using Cost Allocation
* Tags in the Billing and Cost Management User Guide.
*
*
*
* This is a convenience which creates an instance of the {@link ChangeTagsForResourceRequest.Builder} avoiding the
* need to create one manually via {@link ChangeTagsForResourceRequest#builder()}
*
*
* @param changeTagsForResourceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ChangeTagsForResourceRequest.Builder} to create a
* request. A complex type that contains information about the tags that you want to add, edit, or delete.
* @return Result of the ChangeTagsForResource operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws ThrottlingException
* The limit on the number of requests per second was exceeded.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ChangeTagsForResource
* @see AWS
* API Documentation
*/
default ChangeTagsForResourceResponse changeTagsForResource(
Consumer changeTagsForResourceRequest) throws InvalidInputException,
NoSuchHealthCheckException, NoSuchHostedZoneException, PriorRequestNotCompleteException, ThrottlingException,
AwsServiceException, SdkClientException, Route53Exception {
return changeTagsForResource(ChangeTagsForResourceRequest.builder().applyMutation(changeTagsForResourceRequest).build());
}
/**
*
* Creates a CIDR collection in the current Amazon Web Services account.
*
*
* @param createCidrCollectionRequest
* @return Result of the CreateCidrCollection operation returned by the service.
* @throws LimitsExceededException
* This operation can't be completed because the current account has reached the limit on the resource you
* are trying to create. To request a higher limit, create a
* case with the Amazon Web Services Support Center.
* @throws InvalidInputException
* The input is not valid.
* @throws CidrCollectionAlreadyExistsException
* A CIDR collection with this name and a different caller reference already exists in this account.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateCidrCollection
* @see AWS
* API Documentation
*/
default CreateCidrCollectionResponse createCidrCollection(CreateCidrCollectionRequest createCidrCollectionRequest)
throws LimitsExceededException, InvalidInputException, CidrCollectionAlreadyExistsException,
ConcurrentModificationException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Creates a CIDR collection in the current Amazon Web Services account.
*
*
*
* This is a convenience which creates an instance of the {@link CreateCidrCollectionRequest.Builder} avoiding the
* need to create one manually via {@link CreateCidrCollectionRequest#builder()}
*
*
* @param createCidrCollectionRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.CreateCidrCollectionRequest.Builder} to create a
* request.
* @return Result of the CreateCidrCollection operation returned by the service.
* @throws LimitsExceededException
* This operation can't be completed because the current account has reached the limit on the resource you
* are trying to create. To request a higher limit, create a
* case with the Amazon Web Services Support Center.
* @throws InvalidInputException
* The input is not valid.
* @throws CidrCollectionAlreadyExistsException
* A CIDR collection with this name and a different caller reference already exists in this account.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateCidrCollection
* @see AWS
* API Documentation
*/
default CreateCidrCollectionResponse createCidrCollection(
Consumer createCidrCollectionRequest) throws LimitsExceededException,
InvalidInputException, CidrCollectionAlreadyExistsException, ConcurrentModificationException, AwsServiceException,
SdkClientException, Route53Exception {
return createCidrCollection(CreateCidrCollectionRequest.builder().applyMutation(createCidrCollectionRequest).build());
}
/**
*
* Creates a new health check.
*
*
* For information about adding health checks to resource record sets, see HealthCheckId in ChangeResourceRecordSets.
*
*
* ELB Load Balancers
*
*
* If you're registering EC2 instances with an Elastic Load Balancing (ELB) load balancer, do not create Amazon
* Route 53 health checks for the EC2 instances. When you register an EC2 instance with a load balancer, you
* configure settings for an ELB health check, which performs a similar function to a Route 53 health check.
*
*
* Private Hosted Zones
*
*
* You can associate health checks with failover resource record sets in a private hosted zone. Note the following:
*
*
* -
*
* Route 53 health checkers are outside the VPC. To check the health of an endpoint within a VPC by IP address, you
* must assign a public IP address to the instance in the VPC.
*
*
* -
*
* You can configure a health checker to check the health of an external resource that the instance relies on, such
* as a database server.
*
*
* -
*
* You can create a CloudWatch metric, associate an alarm with the metric, and then create a health check that is
* based on the state of the alarm. For example, you might create a CloudWatch metric that checks the status of the
* Amazon EC2 StatusCheckFailed metric, add an alarm to the metric, and then create a health check that
* is based on the state of the alarm. For information about creating CloudWatch metrics and alarms by using the
* CloudWatch console, see the Amazon CloudWatch
* User Guide.
*
*
*
*
* @param createHealthCheckRequest
* A complex type that contains the health check request information.
* @return Result of the CreateHealthCheck operation returned by the service.
* @throws TooManyHealthChecksException
* This health check can't be created because the current account has reached the limit on the number of
* active health checks.
*
* For information about default limits, see Limits in the
* Amazon Route 53 Developer Guide.
*
*
* For information about how to get the current limit for an account, see GetAccountLimit. To request a higher limit, create a
* case with the Amazon Web Services Support Center.
*
*
* You have reached the maximum number of active health checks for an Amazon Web Services account. To
* request a higher limit, create a case with the Amazon
* Web Services Support Center.
* @throws HealthCheckAlreadyExistsException
* The health check you're attempting to create already exists. Amazon Route 53 returns this error when you
* submit a request that has the following values:
*
*
* -
*
* The same value for CallerReference as an existing health check, and one or more values that
* differ from the existing health check that has the same caller reference.
*
*
* -
*
* The same value for CallerReference as a health check that you created and later deleted,
* regardless of the other settings in the request.
*
*
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateHealthCheck
* @see AWS API
* Documentation
*/
default CreateHealthCheckResponse createHealthCheck(CreateHealthCheckRequest createHealthCheckRequest)
throws TooManyHealthChecksException, HealthCheckAlreadyExistsException, InvalidInputException, AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Creates a new health check.
*
*
* For information about adding health checks to resource record sets, see HealthCheckId in ChangeResourceRecordSets.
*
*
* ELB Load Balancers
*
*
* If you're registering EC2 instances with an Elastic Load Balancing (ELB) load balancer, do not create Amazon
* Route 53 health checks for the EC2 instances. When you register an EC2 instance with a load balancer, you
* configure settings for an ELB health check, which performs a similar function to a Route 53 health check.
*
*
* Private Hosted Zones
*
*
* You can associate health checks with failover resource record sets in a private hosted zone. Note the following:
*
*
* -
*
* Route 53 health checkers are outside the VPC. To check the health of an endpoint within a VPC by IP address, you
* must assign a public IP address to the instance in the VPC.
*
*
* -
*
* You can configure a health checker to check the health of an external resource that the instance relies on, such
* as a database server.
*
*
* -
*
* You can create a CloudWatch metric, associate an alarm with the metric, and then create a health check that is
* based on the state of the alarm. For example, you might create a CloudWatch metric that checks the status of the
* Amazon EC2 StatusCheckFailed metric, add an alarm to the metric, and then create a health check that
* is based on the state of the alarm. For information about creating CloudWatch metrics and alarms by using the
* CloudWatch console, see the Amazon CloudWatch
* User Guide.
*
*
*
*
*
* This is a convenience which creates an instance of the {@link CreateHealthCheckRequest.Builder} avoiding the need
* to create one manually via {@link CreateHealthCheckRequest#builder()}
*
*
* @param createHealthCheckRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.CreateHealthCheckRequest.Builder} to create a
* request. A complex type that contains the health check request information.
* @return Result of the CreateHealthCheck operation returned by the service.
* @throws TooManyHealthChecksException
* This health check can't be created because the current account has reached the limit on the number of
* active health checks.
*
* For information about default limits, see Limits in the
* Amazon Route 53 Developer Guide.
*
*
* For information about how to get the current limit for an account, see GetAccountLimit. To request a higher limit, create a
* case with the Amazon Web Services Support Center.
*
*
* You have reached the maximum number of active health checks for an Amazon Web Services account. To
* request a higher limit, create a case with the Amazon
* Web Services Support Center.
* @throws HealthCheckAlreadyExistsException
* The health check you're attempting to create already exists. Amazon Route 53 returns this error when you
* submit a request that has the following values:
*
*
* -
*
* The same value for CallerReference as an existing health check, and one or more values that
* differ from the existing health check that has the same caller reference.
*
*
* -
*
* The same value for CallerReference as a health check that you created and later deleted,
* regardless of the other settings in the request.
*
*
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateHealthCheck
* @see AWS API
* Documentation
*/
default CreateHealthCheckResponse createHealthCheck(Consumer createHealthCheckRequest)
throws TooManyHealthChecksException, HealthCheckAlreadyExistsException, InvalidInputException, AwsServiceException,
SdkClientException, Route53Exception {
return createHealthCheck(CreateHealthCheckRequest.builder().applyMutation(createHealthCheckRequest).build());
}
/**
*
* Creates a new public or private hosted zone. You create records in a public hosted zone to define how you want to
* route traffic on the internet for a domain, such as example.com, and its subdomains (apex.example.com,
* acme.example.com). You create records in a private hosted zone to define how you want to route traffic for a
* domain and its subdomains within one or more Amazon Virtual Private Clouds (Amazon VPCs).
*
*
*
* You can't convert a public hosted zone to a private hosted zone or vice versa. Instead, you must create a new
* hosted zone with the same name and create new resource record sets.
*
*
*
* For more information about charges for hosted zones, see Amazon
* Route 53 Pricing.
*
*
* Note the following:
*
*
* -
*
* You can't create a hosted zone for a top-level domain (TLD) such as .com.
*
*
* -
*
* For public hosted zones, Route 53 automatically creates a default SOA record and four NS records for the zone.
* For more information about SOA and NS records, see NS and SOA Records that
* Route 53 Creates for a Hosted Zone in the Amazon Route 53 Developer Guide.
*
*
* If you want to use the same name servers for multiple public hosted zones, you can optionally associate a
* reusable delegation set with the hosted zone. See the DelegationSetId element.
*
*
* -
*
* If your domain is registered with a registrar other than Route 53, you must update the name servers with your
* registrar to make Route 53 the DNS service for the domain. For more information, see Migrating DNS Service for an
* Existing Domain to Amazon Route 53 in the Amazon Route 53 Developer Guide.
*
*
*
*
* When you submit a CreateHostedZone request, the initial status of the hosted zone is
* PENDING. For public hosted zones, this means that the NS and SOA records are not yet available on
* all Route 53 DNS servers. When the NS and SOA records are available, the status of the zone changes to
* INSYNC.
*
*
* The CreateHostedZone request requires the caller to have an ec2:DescribeVpcs
* permission.
*
*
*
* When creating private hosted zones, the Amazon VPC must belong to the same partition where the hosted zone is
* created. A partition is a group of Amazon Web Services Regions. Each Amazon Web Services account is scoped to one
* partition.
*
*
* The following are the supported partitions:
*
*
* -
*
* aws - Amazon Web Services Regions
*
*
* -
*
* aws-cn - China Regions
*
*
* -
*
* aws-us-gov - Amazon Web Services GovCloud (US) Region
*
*
*
*
* For more information, see Access Management in the
* Amazon Web Services General Reference.
*
*
*
* @param createHostedZoneRequest
* A complex type that contains information about the request to create a public or private hosted zone.
* @return Result of the CreateHostedZone operation returned by the service.
* @throws InvalidDomainNameException
* The specified domain name is not valid.
* @throws HostedZoneAlreadyExistsException
* The hosted zone you're trying to create already exists. Amazon Route 53 returns this error when a hosted
* zone has already been created with the specified CallerReference.
* @throws TooManyHostedZonesException
* This operation can't be completed either because the current account has reached the limit on the number
* of hosted zones or because you've reached the limit on the number of hosted zones that can be associated
* with a reusable delegation set.
*
* For information about default limits, see Limits in the
* Amazon Route 53 Developer Guide.
*
*
* To get the current limit on hosted zones that can be created by an account, see GetAccountLimit.
*
*
* To get the current limit on hosted zones that can be associated with a reusable delegation set, see
* GetReusableDelegationSetLimit.
*
*
* To request a higher limit, create a case with the
* Amazon Web Services Support Center.
* @throws InvalidVpcIdException
* The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access
* this VPC.
* @throws InvalidInputException
* The input is not valid.
* @throws DelegationSetNotAvailableException
* You can create a hosted zone that has the same name as an existing hosted zone (example.com is common),
* but there is a limit to the number of hosted zones that have the same name. If you get this error, Amazon
* Route 53 has reached that limit. If you own the domain name and Route 53 generates this error, contact
* Customer Support.
* @throws ConflictingDomainExistsException
* The cause of this error depends on the operation that you're performing:
*
*
* -
*
* Create a public hosted zone: Two hosted zones that have the same name or that have a parent/child
* relationship (example.com and test.example.com) can't have any common name servers. You tried to create a
* hosted zone that has the same name as an existing hosted zone or that's the parent or child of an
* existing hosted zone, and you specified a delegation set that shares one or more name servers with the
* existing hosted zone. For more information, see CreateReusableDelegationSet.
*
*
* -
*
* Create a private hosted zone: A hosted zone with the specified name already exists and is already
* associated with the Amazon VPC that you specified.
*
*
* -
*
* Associate VPCs with a private hosted zone: The VPC that you specified is already associated with
* another hosted zone that has the same name.
*
*
* @throws NoSuchDelegationSetException
* A reusable delegation set with the specified ID does not exist.
* @throws DelegationSetNotReusableException
* A reusable delegation set with the specified ID does not exist.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateHostedZone
* @see AWS API
* Documentation
*/
default CreateHostedZoneResponse createHostedZone(CreateHostedZoneRequest createHostedZoneRequest)
throws InvalidDomainNameException, HostedZoneAlreadyExistsException, TooManyHostedZonesException,
InvalidVpcIdException, InvalidInputException, DelegationSetNotAvailableException, ConflictingDomainExistsException,
NoSuchDelegationSetException, DelegationSetNotReusableException, AwsServiceException, SdkClientException,
Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Creates a new public or private hosted zone. You create records in a public hosted zone to define how you want to
* route traffic on the internet for a domain, such as example.com, and its subdomains (apex.example.com,
* acme.example.com). You create records in a private hosted zone to define how you want to route traffic for a
* domain and its subdomains within one or more Amazon Virtual Private Clouds (Amazon VPCs).
*
*
*
* You can't convert a public hosted zone to a private hosted zone or vice versa. Instead, you must create a new
* hosted zone with the same name and create new resource record sets.
*
*
*
* For more information about charges for hosted zones, see Amazon
* Route 53 Pricing.
*
*
* Note the following:
*
*
* -
*
* You can't create a hosted zone for a top-level domain (TLD) such as .com.
*
*
* -
*
* For public hosted zones, Route 53 automatically creates a default SOA record and four NS records for the zone.
* For more information about SOA and NS records, see NS and SOA Records that
* Route 53 Creates for a Hosted Zone in the Amazon Route 53 Developer Guide.
*
*
* If you want to use the same name servers for multiple public hosted zones, you can optionally associate a
* reusable delegation set with the hosted zone. See the DelegationSetId element.
*
*
* -
*
* If your domain is registered with a registrar other than Route 53, you must update the name servers with your
* registrar to make Route 53 the DNS service for the domain. For more information, see Migrating DNS Service for an
* Existing Domain to Amazon Route 53 in the Amazon Route 53 Developer Guide.
*
*
*
*
* When you submit a CreateHostedZone request, the initial status of the hosted zone is
* PENDING. For public hosted zones, this means that the NS and SOA records are not yet available on
* all Route 53 DNS servers. When the NS and SOA records are available, the status of the zone changes to
* INSYNC.
*
*
* The CreateHostedZone request requires the caller to have an ec2:DescribeVpcs
* permission.
*
*
*
* When creating private hosted zones, the Amazon VPC must belong to the same partition where the hosted zone is
* created. A partition is a group of Amazon Web Services Regions. Each Amazon Web Services account is scoped to one
* partition.
*
*
* The following are the supported partitions:
*
*
* -
*
* aws - Amazon Web Services Regions
*
*
* -
*
* aws-cn - China Regions
*
*
* -
*
* aws-us-gov - Amazon Web Services GovCloud (US) Region
*
*
*
*
* For more information, see Access Management in the
* Amazon Web Services General Reference.
*
*
*
* This is a convenience which creates an instance of the {@link CreateHostedZoneRequest.Builder} avoiding the need
* to create one manually via {@link CreateHostedZoneRequest#builder()}
*
*
* @param createHostedZoneRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.CreateHostedZoneRequest.Builder} to create a request.
* A complex type that contains information about the request to create a public or private hosted zone.
* @return Result of the CreateHostedZone operation returned by the service.
* @throws InvalidDomainNameException
* The specified domain name is not valid.
* @throws HostedZoneAlreadyExistsException
* The hosted zone you're trying to create already exists. Amazon Route 53 returns this error when a hosted
* zone has already been created with the specified CallerReference.
* @throws TooManyHostedZonesException
* This operation can't be completed either because the current account has reached the limit on the number
* of hosted zones or because you've reached the limit on the number of hosted zones that can be associated
* with a reusable delegation set.
*
* For information about default limits, see Limits in the
* Amazon Route 53 Developer Guide.
*
*
* To get the current limit on hosted zones that can be created by an account, see GetAccountLimit.
*
*
* To get the current limit on hosted zones that can be associated with a reusable delegation set, see
* GetReusableDelegationSetLimit.
*
*
* To request a higher limit, create a case with the
* Amazon Web Services Support Center.
* @throws InvalidVpcIdException
* The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access
* this VPC.
* @throws InvalidInputException
* The input is not valid.
* @throws DelegationSetNotAvailableException
* You can create a hosted zone that has the same name as an existing hosted zone (example.com is common),
* but there is a limit to the number of hosted zones that have the same name. If you get this error, Amazon
* Route 53 has reached that limit. If you own the domain name and Route 53 generates this error, contact
* Customer Support.
* @throws ConflictingDomainExistsException
* The cause of this error depends on the operation that you're performing:
*
*
* -
*
* Create a public hosted zone: Two hosted zones that have the same name or that have a parent/child
* relationship (example.com and test.example.com) can't have any common name servers. You tried to create a
* hosted zone that has the same name as an existing hosted zone or that's the parent or child of an
* existing hosted zone, and you specified a delegation set that shares one or more name servers with the
* existing hosted zone. For more information, see CreateReusableDelegationSet.
*
*
* -
*
* Create a private hosted zone: A hosted zone with the specified name already exists and is already
* associated with the Amazon VPC that you specified.
*
*
* -
*
* Associate VPCs with a private hosted zone: The VPC that you specified is already associated with
* another hosted zone that has the same name.
*
*
* @throws NoSuchDelegationSetException
* A reusable delegation set with the specified ID does not exist.
* @throws DelegationSetNotReusableException
* A reusable delegation set with the specified ID does not exist.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateHostedZone
* @see AWS API
* Documentation
*/
default CreateHostedZoneResponse createHostedZone(Consumer createHostedZoneRequest)
throws InvalidDomainNameException, HostedZoneAlreadyExistsException, TooManyHostedZonesException,
InvalidVpcIdException, InvalidInputException, DelegationSetNotAvailableException, ConflictingDomainExistsException,
NoSuchDelegationSetException, DelegationSetNotReusableException, AwsServiceException, SdkClientException,
Route53Exception {
return createHostedZone(CreateHostedZoneRequest.builder().applyMutation(createHostedZoneRequest).build());
}
/**
*
* Creates a new key-signing key (KSK) associated with a hosted zone. You can only have two KSKs per hosted zone.
*
*
* @param createKeySigningKeyRequest
* @return Result of the CreateKeySigningKey operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidArgumentException
* Parameter name is not valid.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidKmsArnException
* The KeyManagementServiceArn that you specified isn't valid to use with DNSSEC signing.
* @throws InvalidKeySigningKeyStatusException
* The key-signing key (KSK) status isn't valid or another KSK has the status INTERNAL_FAILURE.
* @throws InvalidSigningStatusException
* Your hosted zone status isn't valid for this operation. In the hosted zone, change the status to enable
* DNSSEC or disable DNSSEC.
* @throws InvalidKeySigningKeyNameException
* The key-signing key (KSK) name that you specified isn't a valid name.
* @throws KeySigningKeyAlreadyExistsException
* You've already created a key-signing key (KSK) with this name or with the same customer managed key ARN.
* @throws TooManyKeySigningKeysException
* You've reached the limit for the number of key-signing keys (KSKs). Remove at least one KSK, and then try
* again.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateKeySigningKey
* @see AWS
* API Documentation
*/
default CreateKeySigningKeyResponse createKeySigningKey(CreateKeySigningKeyRequest createKeySigningKeyRequest)
throws NoSuchHostedZoneException, InvalidArgumentException, InvalidInputException, InvalidKmsArnException,
InvalidKeySigningKeyStatusException, InvalidSigningStatusException, InvalidKeySigningKeyNameException,
KeySigningKeyAlreadyExistsException, TooManyKeySigningKeysException, ConcurrentModificationException,
AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Creates a new key-signing key (KSK) associated with a hosted zone. You can only have two KSKs per hosted zone.
*
*
*
* This is a convenience which creates an instance of the {@link CreateKeySigningKeyRequest.Builder} avoiding the
* need to create one manually via {@link CreateKeySigningKeyRequest#builder()}
*
*
* @param createKeySigningKeyRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.CreateKeySigningKeyRequest.Builder} to create a
* request.
* @return Result of the CreateKeySigningKey operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidArgumentException
* Parameter name is not valid.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidKmsArnException
* The KeyManagementServiceArn that you specified isn't valid to use with DNSSEC signing.
* @throws InvalidKeySigningKeyStatusException
* The key-signing key (KSK) status isn't valid or another KSK has the status INTERNAL_FAILURE.
* @throws InvalidSigningStatusException
* Your hosted zone status isn't valid for this operation. In the hosted zone, change the status to enable
* DNSSEC or disable DNSSEC.
* @throws InvalidKeySigningKeyNameException
* The key-signing key (KSK) name that you specified isn't a valid name.
* @throws KeySigningKeyAlreadyExistsException
* You've already created a key-signing key (KSK) with this name or with the same customer managed key ARN.
* @throws TooManyKeySigningKeysException
* You've reached the limit for the number of key-signing keys (KSKs). Remove at least one KSK, and then try
* again.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateKeySigningKey
* @see AWS
* API Documentation
*/
default CreateKeySigningKeyResponse createKeySigningKey(
Consumer createKeySigningKeyRequest) throws NoSuchHostedZoneException,
InvalidArgumentException, InvalidInputException, InvalidKmsArnException, InvalidKeySigningKeyStatusException,
InvalidSigningStatusException, InvalidKeySigningKeyNameException, KeySigningKeyAlreadyExistsException,
TooManyKeySigningKeysException, ConcurrentModificationException, AwsServiceException, SdkClientException,
Route53Exception {
return createKeySigningKey(CreateKeySigningKeyRequest.builder().applyMutation(createKeySigningKeyRequest).build());
}
/**
*
* Creates a configuration for DNS query logging. After you create a query logging configuration, Amazon Route 53
* begins to publish log data to an Amazon CloudWatch Logs log group.
*
*
* DNS query logs contain information about the queries that Route 53 receives for a specified public hosted zone,
* such as the following:
*
*
* -
*
* Route 53 edge location that responded to the DNS query
*
*
* -
*
* Domain or subdomain that was requested
*
*
* -
*
* DNS record type, such as A or AAAA
*
*
* -
*
* DNS response code, such as NoError or ServFail
*
*
*
*
* - Log Group and Resource Policy
* -
*
* Before you create a query logging configuration, perform the following operations.
*
*
*
* If you create a query logging configuration using the Route 53 console, Route 53 performs these operations
* automatically.
*
*
*
* -
*
* Create a CloudWatch Logs log group, and make note of the ARN, which you specify when you create a query logging
* configuration. Note the following:
*
*
* -
*
* You must create the log group in the us-east-1 region.
*
*
* -
*
* You must use the same Amazon Web Services account to create the log group and the hosted zone that you want to
* configure query logging for.
*
*
* -
*
* When you create log groups for query logging, we recommend that you use a consistent prefix, for example:
*
*
* /aws/route53/hosted zone name
*
*
* In the next step, you'll create a resource policy, which controls access to one or more log groups and the
* associated Amazon Web Services resources, such as Route 53 hosted zones. There's a limit on the number of
* resource policies that you can create, so we recommend that you use a consistent prefix so you can use the same
* resource policy for all the log groups that you create for query logging.
*
*
*
*
* -
*
* Create a CloudWatch Logs resource policy, and give it the permissions that Route 53 needs to create log streams
* and to send query logs to log streams. For the value of Resource, specify the ARN for the log group
* that you created in the previous step. To use the same resource policy for all the CloudWatch Logs log groups
* that you created for query logging configurations, replace the hosted zone name with *, for example:
*
*
* arn:aws:logs:us-east-1:123412341234:log-group:/aws/route53/*
*
*
* To avoid the confused deputy problem, a security issue where an entity without a permission for an action can
* coerce a more-privileged entity to perform it, you can optionally limit the permissions that a service has to a
* resource in a resource-based policy by supplying the following values:
*
*
* -
*
* For aws:SourceArn, supply the hosted zone ARN used in creating the query logging configuration. For
* example, aws:SourceArn: arn:aws:route53:::hostedzone/hosted zone ID.
*
*
* -
*
* For aws:SourceAccount, supply the account ID for the account that creates the query logging
* configuration. For example, aws:SourceAccount:111111111111.
*
*
*
*
* For more information, see The
* confused deputy problem in the Amazon Web Services IAM User Guide.
*
*
*
* You can't use the CloudWatch console to create or edit a resource policy. You must use the CloudWatch API, one of
* the Amazon Web Services SDKs, or the CLI.
*
*
*
*
* - Log Streams and Edge Locations
* -
*
* When Route 53 finishes creating the configuration for DNS query logging, it does the following:
*
*
* -
*
* Creates a log stream for an edge location the first time that the edge location responds to DNS queries for the
* specified hosted zone. That log stream is used to log all queries that Route 53 responds to for that edge
* location.
*
*
* -
*
* Begins to send query logs to the applicable log stream.
*
*
*
*
* The name of each log stream is in the following format:
*
*
* hosted zone ID/edge location code
*
*
* The edge location code is a three-letter code and an arbitrarily assigned number, for example, DFW3. The
* three-letter code typically corresponds with the International Air Transport Association airport code for an
* airport near the edge location. (These abbreviations might change in the future.) For a list of edge locations,
* see "The Route 53 Global Network" on the Route 53 Product
* Details page.
*
*
* - Queries That Are Logged
* -
*
* Query logs contain only the queries that DNS resolvers forward to Route 53. If a DNS resolver has already cached
* the response to a query (such as the IP address for a load balancer for example.com), the resolver will continue
* to return the cached response. It doesn't forward another query to Route 53 until the TTL for the corresponding
* resource record set expires. Depending on how many DNS queries are submitted for a resource record set, and
* depending on the TTL for that resource record set, query logs might contain information about only one query out
* of every several thousand queries that are submitted to DNS. For more information about how DNS works, see Routing Internet
* Traffic to Your Website or Web Application in the Amazon Route 53 Developer Guide.
*
*
* - Log File Format
* -
*
* For a list of the values in each query log and the format of each value, see Logging DNS Queries in the
* Amazon Route 53 Developer Guide.
*
*
* - Pricing
* -
*
* For information about charges for query logs, see Amazon
* CloudWatch Pricing.
*
*
* - How to Stop Logging
* -
*
* If you want Route 53 to stop sending query logs to CloudWatch Logs, delete the query logging configuration. For
* more information, see DeleteQueryLoggingConfig.
*
*
*
*
* @param createQueryLoggingConfigRequest
* @return Result of the CreateQueryLoggingConfig operation returned by the service.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws NoSuchCloudWatchLogsLogGroupException
* There is no CloudWatch Logs log group with the specified ARN.
* @throws InvalidInputException
* The input is not valid.
* @throws QueryLoggingConfigAlreadyExistsException
* You can create only one query logging configuration for a hosted zone, and a query logging configuration
* already exists for this hosted zone.
* @throws InsufficientCloudWatchLogsResourcePolicyException
* Amazon Route 53 doesn't have the permissions required to create log streams and send query logs to log
* streams. Possible causes include the following:
*
* -
*
* There is no resource policy that specifies the log group ARN in the value for Resource.
*
*
* -
*
* The resource policy that includes the log group ARN in the value for Resource doesn't have
* the necessary permissions.
*
*
* -
*
* The resource policy hasn't finished propagating yet.
*
*
* -
*
* The Key management service (KMS) key you specified doesn’t exist or it can’t be used with the log group
* associated with query log. Update or provide a resource policy to grant permissions for the KMS key.
*
*
* -
*
* The Key management service (KMS) key you specified is marked as disabled for the log group associated
* with query log. Update or provide a resource policy to grant permissions for the KMS key.
*
*
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateQueryLoggingConfig
* @see AWS API Documentation
*/
default CreateQueryLoggingConfigResponse createQueryLoggingConfig(
CreateQueryLoggingConfigRequest createQueryLoggingConfigRequest) throws ConcurrentModificationException,
NoSuchHostedZoneException, NoSuchCloudWatchLogsLogGroupException, InvalidInputException,
QueryLoggingConfigAlreadyExistsException, InsufficientCloudWatchLogsResourcePolicyException, AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Creates a configuration for DNS query logging. After you create a query logging configuration, Amazon Route 53
* begins to publish log data to an Amazon CloudWatch Logs log group.
*
*
* DNS query logs contain information about the queries that Route 53 receives for a specified public hosted zone,
* such as the following:
*
*
* -
*
* Route 53 edge location that responded to the DNS query
*
*
* -
*
* Domain or subdomain that was requested
*
*
* -
*
* DNS record type, such as A or AAAA
*
*
* -
*
* DNS response code, such as NoError or ServFail
*
*
*
*
* - Log Group and Resource Policy
* -
*
* Before you create a query logging configuration, perform the following operations.
*
*
*
* If you create a query logging configuration using the Route 53 console, Route 53 performs these operations
* automatically.
*
*
*
* -
*
* Create a CloudWatch Logs log group, and make note of the ARN, which you specify when you create a query logging
* configuration. Note the following:
*
*
* -
*
* You must create the log group in the us-east-1 region.
*
*
* -
*
* You must use the same Amazon Web Services account to create the log group and the hosted zone that you want to
* configure query logging for.
*
*
* -
*
* When you create log groups for query logging, we recommend that you use a consistent prefix, for example:
*
*
* /aws/route53/hosted zone name
*
*
* In the next step, you'll create a resource policy, which controls access to one or more log groups and the
* associated Amazon Web Services resources, such as Route 53 hosted zones. There's a limit on the number of
* resource policies that you can create, so we recommend that you use a consistent prefix so you can use the same
* resource policy for all the log groups that you create for query logging.
*
*
*
*
* -
*
* Create a CloudWatch Logs resource policy, and give it the permissions that Route 53 needs to create log streams
* and to send query logs to log streams. For the value of Resource, specify the ARN for the log group
* that you created in the previous step. To use the same resource policy for all the CloudWatch Logs log groups
* that you created for query logging configurations, replace the hosted zone name with *, for example:
*
*
* arn:aws:logs:us-east-1:123412341234:log-group:/aws/route53/*
*
*
* To avoid the confused deputy problem, a security issue where an entity without a permission for an action can
* coerce a more-privileged entity to perform it, you can optionally limit the permissions that a service has to a
* resource in a resource-based policy by supplying the following values:
*
*
* -
*
* For aws:SourceArn, supply the hosted zone ARN used in creating the query logging configuration. For
* example, aws:SourceArn: arn:aws:route53:::hostedzone/hosted zone ID.
*
*
* -
*
* For aws:SourceAccount, supply the account ID for the account that creates the query logging
* configuration. For example, aws:SourceAccount:111111111111.
*
*
*
*
* For more information, see The
* confused deputy problem in the Amazon Web Services IAM User Guide.
*
*
*
* You can't use the CloudWatch console to create or edit a resource policy. You must use the CloudWatch API, one of
* the Amazon Web Services SDKs, or the CLI.
*
*
*
*
* - Log Streams and Edge Locations
* -
*
* When Route 53 finishes creating the configuration for DNS query logging, it does the following:
*
*
* -
*
* Creates a log stream for an edge location the first time that the edge location responds to DNS queries for the
* specified hosted zone. That log stream is used to log all queries that Route 53 responds to for that edge
* location.
*
*
* -
*
* Begins to send query logs to the applicable log stream.
*
*
*
*
* The name of each log stream is in the following format:
*
*
* hosted zone ID/edge location code
*
*
* The edge location code is a three-letter code and an arbitrarily assigned number, for example, DFW3. The
* three-letter code typically corresponds with the International Air Transport Association airport code for an
* airport near the edge location. (These abbreviations might change in the future.) For a list of edge locations,
* see "The Route 53 Global Network" on the Route 53 Product
* Details page.
*
*
* - Queries That Are Logged
* -
*
* Query logs contain only the queries that DNS resolvers forward to Route 53. If a DNS resolver has already cached
* the response to a query (such as the IP address for a load balancer for example.com), the resolver will continue
* to return the cached response. It doesn't forward another query to Route 53 until the TTL for the corresponding
* resource record set expires. Depending on how many DNS queries are submitted for a resource record set, and
* depending on the TTL for that resource record set, query logs might contain information about only one query out
* of every several thousand queries that are submitted to DNS. For more information about how DNS works, see Routing Internet
* Traffic to Your Website or Web Application in the Amazon Route 53 Developer Guide.
*
*
* - Log File Format
* -
*
* For a list of the values in each query log and the format of each value, see Logging DNS Queries in the
* Amazon Route 53 Developer Guide.
*
*
* - Pricing
* -
*
* For information about charges for query logs, see Amazon
* CloudWatch Pricing.
*
*
* - How to Stop Logging
* -
*
* If you want Route 53 to stop sending query logs to CloudWatch Logs, delete the query logging configuration. For
* more information, see DeleteQueryLoggingConfig.
*
*
*
*
*
* This is a convenience which creates an instance of the {@link CreateQueryLoggingConfigRequest.Builder} avoiding
* the need to create one manually via {@link CreateQueryLoggingConfigRequest#builder()}
*
*
* @param createQueryLoggingConfigRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.CreateQueryLoggingConfigRequest.Builder} to create a
* request.
* @return Result of the CreateQueryLoggingConfig operation returned by the service.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws NoSuchCloudWatchLogsLogGroupException
* There is no CloudWatch Logs log group with the specified ARN.
* @throws InvalidInputException
* The input is not valid.
* @throws QueryLoggingConfigAlreadyExistsException
* You can create only one query logging configuration for a hosted zone, and a query logging configuration
* already exists for this hosted zone.
* @throws InsufficientCloudWatchLogsResourcePolicyException
* Amazon Route 53 doesn't have the permissions required to create log streams and send query logs to log
* streams. Possible causes include the following:
*
* -
*
* There is no resource policy that specifies the log group ARN in the value for Resource.
*
*
* -
*
* The resource policy that includes the log group ARN in the value for Resource doesn't have
* the necessary permissions.
*
*
* -
*
* The resource policy hasn't finished propagating yet.
*
*
* -
*
* The Key management service (KMS) key you specified doesn’t exist or it can’t be used with the log group
* associated with query log. Update or provide a resource policy to grant permissions for the KMS key.
*
*
* -
*
* The Key management service (KMS) key you specified is marked as disabled for the log group associated
* with query log. Update or provide a resource policy to grant permissions for the KMS key.
*
*
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateQueryLoggingConfig
* @see AWS API Documentation
*/
default CreateQueryLoggingConfigResponse createQueryLoggingConfig(
Consumer createQueryLoggingConfigRequest)
throws ConcurrentModificationException, NoSuchHostedZoneException, NoSuchCloudWatchLogsLogGroupException,
InvalidInputException, QueryLoggingConfigAlreadyExistsException, InsufficientCloudWatchLogsResourcePolicyException,
AwsServiceException, SdkClientException, Route53Exception {
return createQueryLoggingConfig(CreateQueryLoggingConfigRequest.builder().applyMutation(createQueryLoggingConfigRequest)
.build());
}
/**
*
* Creates a delegation set (a group of four name servers) that can be reused by multiple hosted zones that were
* created by the same Amazon Web Services account.
*
*
* You can also create a reusable delegation set that uses the four name servers that are associated with an
* existing hosted zone. Specify the hosted zone ID in the CreateReusableDelegationSet request.
*
*
*
* You can't associate a reusable delegation set with a private hosted zone.
*
*
*
* For information about using a reusable delegation set to configure white label name servers, see Configuring White
* Label Name Servers.
*
*
* The process for migrating existing hosted zones to use a reusable delegation set is comparable to the process for
* configuring white label name servers. You need to perform the following steps:
*
*
* -
*
* Create a reusable delegation set.
*
*
* -
*
* Recreate hosted zones, and reduce the TTL to 60 seconds or less.
*
*
* -
*
* Recreate resource record sets in the new hosted zones.
*
*
* -
*
* Change the registrar's name servers to use the name servers for the new hosted zones.
*
*
* -
*
* Monitor traffic for the website or application.
*
*
* -
*
* Change TTLs back to their original values.
*
*
*
*
* If you want to migrate existing hosted zones to use a reusable delegation set, the existing hosted zones can't
* use any of the name servers that are assigned to the reusable delegation set. If one or more hosted zones do use
* one or more name servers that are assigned to the reusable delegation set, you can do one of the following:
*
*
* -
*
* For small numbers of hosted zones—up to a few hundred—it's relatively easy to create reusable delegation sets
* until you get one that has four name servers that don't overlap with any of the name servers in your hosted
* zones.
*
*
* -
*
* For larger numbers of hosted zones, the easiest solution is to use more than one reusable delegation set.
*
*
* -
*
* For larger numbers of hosted zones, you can also migrate hosted zones that have overlapping name servers to
* hosted zones that don't have overlapping name servers, then migrate the hosted zones again to use the reusable
* delegation set.
*
*
*
*
* @param createReusableDelegationSetRequest
* @return Result of the CreateReusableDelegationSet operation returned by the service.
* @throws DelegationSetAlreadyCreatedException
* A delegation set with the same owner and caller reference combination has already been created.
* @throws LimitsExceededException
* This operation can't be completed because the current account has reached the limit on the resource you
* are trying to create. To request a higher limit, create a
* case with the Amazon Web Services Support Center.
* @throws HostedZoneNotFoundException
* The specified HostedZone can't be found.
* @throws InvalidArgumentException
* Parameter name is not valid.
* @throws InvalidInputException
* The input is not valid.
* @throws DelegationSetNotAvailableException
* You can create a hosted zone that has the same name as an existing hosted zone (example.com is common),
* but there is a limit to the number of hosted zones that have the same name. If you get this error, Amazon
* Route 53 has reached that limit. If you own the domain name and Route 53 generates this error, contact
* Customer Support.
* @throws DelegationSetAlreadyReusableException
* The specified delegation set has already been marked as reusable.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateReusableDelegationSet
* @see AWS API Documentation
*/
default CreateReusableDelegationSetResponse createReusableDelegationSet(
CreateReusableDelegationSetRequest createReusableDelegationSetRequest) throws DelegationSetAlreadyCreatedException,
LimitsExceededException, HostedZoneNotFoundException, InvalidArgumentException, InvalidInputException,
DelegationSetNotAvailableException, DelegationSetAlreadyReusableException, AwsServiceException, SdkClientException,
Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Creates a delegation set (a group of four name servers) that can be reused by multiple hosted zones that were
* created by the same Amazon Web Services account.
*
*
* You can also create a reusable delegation set that uses the four name servers that are associated with an
* existing hosted zone. Specify the hosted zone ID in the CreateReusableDelegationSet request.
*
*
*
* You can't associate a reusable delegation set with a private hosted zone.
*
*
*
* For information about using a reusable delegation set to configure white label name servers, see Configuring White
* Label Name Servers.
*
*
* The process for migrating existing hosted zones to use a reusable delegation set is comparable to the process for
* configuring white label name servers. You need to perform the following steps:
*
*
* -
*
* Create a reusable delegation set.
*
*
* -
*
* Recreate hosted zones, and reduce the TTL to 60 seconds or less.
*
*
* -
*
* Recreate resource record sets in the new hosted zones.
*
*
* -
*
* Change the registrar's name servers to use the name servers for the new hosted zones.
*
*
* -
*
* Monitor traffic for the website or application.
*
*
* -
*
* Change TTLs back to their original values.
*
*
*
*
* If you want to migrate existing hosted zones to use a reusable delegation set, the existing hosted zones can't
* use any of the name servers that are assigned to the reusable delegation set. If one or more hosted zones do use
* one or more name servers that are assigned to the reusable delegation set, you can do one of the following:
*
*
* -
*
* For small numbers of hosted zones—up to a few hundred—it's relatively easy to create reusable delegation sets
* until you get one that has four name servers that don't overlap with any of the name servers in your hosted
* zones.
*
*
* -
*
* For larger numbers of hosted zones, the easiest solution is to use more than one reusable delegation set.
*
*
* -
*
* For larger numbers of hosted zones, you can also migrate hosted zones that have overlapping name servers to
* hosted zones that don't have overlapping name servers, then migrate the hosted zones again to use the reusable
* delegation set.
*
*
*
*
*
* This is a convenience which creates an instance of the {@link CreateReusableDelegationSetRequest.Builder}
* avoiding the need to create one manually via {@link CreateReusableDelegationSetRequest#builder()}
*
*
* @param createReusableDelegationSetRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.CreateReusableDelegationSetRequest.Builder} to create
* a request.
* @return Result of the CreateReusableDelegationSet operation returned by the service.
* @throws DelegationSetAlreadyCreatedException
* A delegation set with the same owner and caller reference combination has already been created.
* @throws LimitsExceededException
* This operation can't be completed because the current account has reached the limit on the resource you
* are trying to create. To request a higher limit, create a
* case with the Amazon Web Services Support Center.
* @throws HostedZoneNotFoundException
* The specified HostedZone can't be found.
* @throws InvalidArgumentException
* Parameter name is not valid.
* @throws InvalidInputException
* The input is not valid.
* @throws DelegationSetNotAvailableException
* You can create a hosted zone that has the same name as an existing hosted zone (example.com is common),
* but there is a limit to the number of hosted zones that have the same name. If you get this error, Amazon
* Route 53 has reached that limit. If you own the domain name and Route 53 generates this error, contact
* Customer Support.
* @throws DelegationSetAlreadyReusableException
* The specified delegation set has already been marked as reusable.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateReusableDelegationSet
* @see AWS API Documentation
*/
default CreateReusableDelegationSetResponse createReusableDelegationSet(
Consumer createReusableDelegationSetRequest)
throws DelegationSetAlreadyCreatedException, LimitsExceededException, HostedZoneNotFoundException,
InvalidArgumentException, InvalidInputException, DelegationSetNotAvailableException,
DelegationSetAlreadyReusableException, AwsServiceException, SdkClientException, Route53Exception {
return createReusableDelegationSet(CreateReusableDelegationSetRequest.builder()
.applyMutation(createReusableDelegationSetRequest).build());
}
/**
*
* Creates a traffic policy, which you use to create multiple DNS resource record sets for one domain name (such as
* example.com) or one subdomain name (such as www.example.com).
*
*
* @param createTrafficPolicyRequest
* A complex type that contains information about the traffic policy that you want to create.
* @return Result of the CreateTrafficPolicy operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws TooManyTrafficPoliciesException
* This traffic policy can't be created because the current account has reached the limit on the number of
* traffic policies.
*
* For information about default limits, see Limits in the
* Amazon Route 53 Developer Guide.
*
*
* To get the current limit for an account, see GetAccountLimit.
*
*
* To request a higher limit, create a case with the
* Amazon Web Services Support Center.
* @throws TrafficPolicyAlreadyExistsException
* A traffic policy that has the same value for Name already exists.
* @throws InvalidTrafficPolicyDocumentException
* The format of the traffic policy document that you specified in the Document element is not
* valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateTrafficPolicy
* @see AWS
* API Documentation
*/
default CreateTrafficPolicyResponse createTrafficPolicy(CreateTrafficPolicyRequest createTrafficPolicyRequest)
throws InvalidInputException, TooManyTrafficPoliciesException, TrafficPolicyAlreadyExistsException,
InvalidTrafficPolicyDocumentException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Creates a traffic policy, which you use to create multiple DNS resource record sets for one domain name (such as
* example.com) or one subdomain name (such as www.example.com).
*
*
*
* This is a convenience which creates an instance of the {@link CreateTrafficPolicyRequest.Builder} avoiding the
* need to create one manually via {@link CreateTrafficPolicyRequest#builder()}
*
*
* @param createTrafficPolicyRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.CreateTrafficPolicyRequest.Builder} to create a
* request. A complex type that contains information about the traffic policy that you want to create.
* @return Result of the CreateTrafficPolicy operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws TooManyTrafficPoliciesException
* This traffic policy can't be created because the current account has reached the limit on the number of
* traffic policies.
*
* For information about default limits, see Limits in the
* Amazon Route 53 Developer Guide.
*
*
* To get the current limit for an account, see GetAccountLimit.
*
*
* To request a higher limit, create a case with the
* Amazon Web Services Support Center.
* @throws TrafficPolicyAlreadyExistsException
* A traffic policy that has the same value for Name already exists.
* @throws InvalidTrafficPolicyDocumentException
* The format of the traffic policy document that you specified in the Document element is not
* valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateTrafficPolicy
* @see AWS
* API Documentation
*/
default CreateTrafficPolicyResponse createTrafficPolicy(
Consumer createTrafficPolicyRequest) throws InvalidInputException,
TooManyTrafficPoliciesException, TrafficPolicyAlreadyExistsException, InvalidTrafficPolicyDocumentException,
AwsServiceException, SdkClientException, Route53Exception {
return createTrafficPolicy(CreateTrafficPolicyRequest.builder().applyMutation(createTrafficPolicyRequest).build());
}
/**
*
* Creates resource record sets in a specified hosted zone based on the settings in a specified traffic policy
* version. In addition, CreateTrafficPolicyInstance associates the resource record sets with a
* specified domain name (such as example.com) or subdomain name (such as www.example.com). Amazon Route 53 responds
* to DNS queries for the domain or subdomain name by using the resource record sets that
* CreateTrafficPolicyInstance created.
*
*
*
* After you submit an CreateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53
* creates the resource record sets that are specified in the traffic policy definition. Use
* GetTrafficPolicyInstance with the id of new traffic policy instance to confirm that the
* CreateTrafficPolicyInstance request completed successfully. For more information, see the
* State response element.
*
*
*
* @param createTrafficPolicyInstanceRequest
* A complex type that contains information about the resource record sets that you want to create based on a
* specified traffic policy.
* @return Result of the CreateTrafficPolicyInstance operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws TooManyTrafficPolicyInstancesException
* This traffic policy instance can't be created because the current account has reached the limit on the
* number of traffic policy instances.
*
* For information about default limits, see Limits in the
* Amazon Route 53 Developer Guide.
*
*
* For information about how to get the current limit for an account, see GetAccountLimit.
*
*
* To request a higher limit, create a case with the
* Amazon Web Services Support Center.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws TrafficPolicyInstanceAlreadyExistsException
* There is already a traffic policy instance with the specified ID.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateTrafficPolicyInstance
* @see AWS API Documentation
*/
default CreateTrafficPolicyInstanceResponse createTrafficPolicyInstance(
CreateTrafficPolicyInstanceRequest createTrafficPolicyInstanceRequest) throws NoSuchHostedZoneException,
InvalidInputException, TooManyTrafficPolicyInstancesException, NoSuchTrafficPolicyException,
TrafficPolicyInstanceAlreadyExistsException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Creates resource record sets in a specified hosted zone based on the settings in a specified traffic policy
* version. In addition, CreateTrafficPolicyInstance associates the resource record sets with a
* specified domain name (such as example.com) or subdomain name (such as www.example.com). Amazon Route 53 responds
* to DNS queries for the domain or subdomain name by using the resource record sets that
* CreateTrafficPolicyInstance created.
*
*
*
* After you submit an CreateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53
* creates the resource record sets that are specified in the traffic policy definition. Use
* GetTrafficPolicyInstance with the id of new traffic policy instance to confirm that the
* CreateTrafficPolicyInstance request completed successfully. For more information, see the
* State response element.
*
*
*
* This is a convenience which creates an instance of the {@link CreateTrafficPolicyInstanceRequest.Builder}
* avoiding the need to create one manually via {@link CreateTrafficPolicyInstanceRequest#builder()}
*
*
* @param createTrafficPolicyInstanceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.CreateTrafficPolicyInstanceRequest.Builder} to create
* a request. A complex type that contains information about the resource record sets that you want to create
* based on a specified traffic policy.
* @return Result of the CreateTrafficPolicyInstance operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws TooManyTrafficPolicyInstancesException
* This traffic policy instance can't be created because the current account has reached the limit on the
* number of traffic policy instances.
*
* For information about default limits, see Limits in the
* Amazon Route 53 Developer Guide.
*
*
* For information about how to get the current limit for an account, see GetAccountLimit.
*
*
* To request a higher limit, create a case with the
* Amazon Web Services Support Center.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws TrafficPolicyInstanceAlreadyExistsException
* There is already a traffic policy instance with the specified ID.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateTrafficPolicyInstance
* @see AWS API Documentation
*/
default CreateTrafficPolicyInstanceResponse createTrafficPolicyInstance(
Consumer createTrafficPolicyInstanceRequest)
throws NoSuchHostedZoneException, InvalidInputException, TooManyTrafficPolicyInstancesException,
NoSuchTrafficPolicyException, TrafficPolicyInstanceAlreadyExistsException, AwsServiceException, SdkClientException,
Route53Exception {
return createTrafficPolicyInstance(CreateTrafficPolicyInstanceRequest.builder()
.applyMutation(createTrafficPolicyInstanceRequest).build());
}
/**
*
* Creates a new version of an existing traffic policy. When you create a new version of a traffic policy, you
* specify the ID of the traffic policy that you want to update and a JSON-formatted document that describes the new
* version. You use traffic policies to create multiple DNS resource record sets for one domain name (such as
* example.com) or one subdomain name (such as www.example.com). You can create a maximum of 1000 versions of a
* traffic policy. If you reach the limit and need to create another version, you'll need to start a new traffic
* policy.
*
*
* @param createTrafficPolicyVersionRequest
* A complex type that contains information about the traffic policy that you want to create a new version
* for.
* @return Result of the CreateTrafficPolicyVersion operation returned by the service.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws TooManyTrafficPolicyVersionsForCurrentPolicyException
* This traffic policy version can't be created because you've reached the limit of 1000 on the number of
* versions that you can create for the current traffic policy.
*
* To create more traffic policy versions, you can use GetTrafficPolicy to get the traffic policy document for a specified traffic policy version, and then
* use
* CreateTrafficPolicy to create a new traffic policy using the traffic policy document.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws InvalidTrafficPolicyDocumentException
* The format of the traffic policy document that you specified in the Document element is not
* valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateTrafficPolicyVersion
* @see AWS API Documentation
*/
default CreateTrafficPolicyVersionResponse createTrafficPolicyVersion(
CreateTrafficPolicyVersionRequest createTrafficPolicyVersionRequest) throws NoSuchTrafficPolicyException,
InvalidInputException, TooManyTrafficPolicyVersionsForCurrentPolicyException, ConcurrentModificationException,
InvalidTrafficPolicyDocumentException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Creates a new version of an existing traffic policy. When you create a new version of a traffic policy, you
* specify the ID of the traffic policy that you want to update and a JSON-formatted document that describes the new
* version. You use traffic policies to create multiple DNS resource record sets for one domain name (such as
* example.com) or one subdomain name (such as www.example.com). You can create a maximum of 1000 versions of a
* traffic policy. If you reach the limit and need to create another version, you'll need to start a new traffic
* policy.
*
*
*
* This is a convenience which creates an instance of the {@link CreateTrafficPolicyVersionRequest.Builder} avoiding
* the need to create one manually via {@link CreateTrafficPolicyVersionRequest#builder()}
*
*
* @param createTrafficPolicyVersionRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.CreateTrafficPolicyVersionRequest.Builder} to create
* a request. A complex type that contains information about the traffic policy that you want to create a new
* version for.
* @return Result of the CreateTrafficPolicyVersion operation returned by the service.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws TooManyTrafficPolicyVersionsForCurrentPolicyException
* This traffic policy version can't be created because you've reached the limit of 1000 on the number of
* versions that you can create for the current traffic policy.
*
* To create more traffic policy versions, you can use GetTrafficPolicy to get the traffic policy document for a specified traffic policy version, and then
* use
* CreateTrafficPolicy to create a new traffic policy using the traffic policy document.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws InvalidTrafficPolicyDocumentException
* The format of the traffic policy document that you specified in the Document element is not
* valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateTrafficPolicyVersion
* @see AWS API Documentation
*/
default CreateTrafficPolicyVersionResponse createTrafficPolicyVersion(
Consumer createTrafficPolicyVersionRequest)
throws NoSuchTrafficPolicyException, InvalidInputException, TooManyTrafficPolicyVersionsForCurrentPolicyException,
ConcurrentModificationException, InvalidTrafficPolicyDocumentException, AwsServiceException, SdkClientException,
Route53Exception {
return createTrafficPolicyVersion(CreateTrafficPolicyVersionRequest.builder()
.applyMutation(createTrafficPolicyVersionRequest).build());
}
/**
*
* Authorizes the Amazon Web Services account that created a specified VPC to submit an
* AssociateVPCWithHostedZone request to associate the VPC with a specified hosted zone that was
* created by a different account. To submit a CreateVPCAssociationAuthorization request, you must use
* the account that created the hosted zone. After you authorize the association, use the account that created the
* VPC to submit an AssociateVPCWithHostedZone request.
*
*
*
* If you want to associate multiple VPCs that you created by using one account with a hosted zone that you created
* by using a different account, you must submit one authorization request for each VPC.
*
*
*
* @param createVpcAssociationAuthorizationRequest
* A complex type that contains information about the request to authorize associating a VPC with your
* private hosted zone. Authorization is only required when a private hosted zone and a VPC were created by
* using different accounts.
* @return Result of the CreateVPCAssociationAuthorization operation returned by the service.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws TooManyVpcAssociationAuthorizationsException
* You've created the maximum number of authorizations that can be created for the specified hosted zone. To
* authorize another VPC to be associated with the hosted zone, submit a
* DeleteVPCAssociationAuthorization request to remove an existing authorization. To get a list
* of existing authorizations, submit a ListVPCAssociationAuthorizations request.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidVpcIdException
* The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access
* this VPC.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateVPCAssociationAuthorization
* @see AWS API Documentation
*/
default CreateVpcAssociationAuthorizationResponse createVPCAssociationAuthorization(
CreateVpcAssociationAuthorizationRequest createVpcAssociationAuthorizationRequest)
throws ConcurrentModificationException, TooManyVpcAssociationAuthorizationsException, NoSuchHostedZoneException,
InvalidVpcIdException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Authorizes the Amazon Web Services account that created a specified VPC to submit an
* AssociateVPCWithHostedZone request to associate the VPC with a specified hosted zone that was
* created by a different account. To submit a CreateVPCAssociationAuthorization request, you must use
* the account that created the hosted zone. After you authorize the association, use the account that created the
* VPC to submit an AssociateVPCWithHostedZone request.
*
*
*
* If you want to associate multiple VPCs that you created by using one account with a hosted zone that you created
* by using a different account, you must submit one authorization request for each VPC.
*
*
*
* This is a convenience which creates an instance of the {@link CreateVpcAssociationAuthorizationRequest.Builder}
* avoiding the need to create one manually via {@link CreateVpcAssociationAuthorizationRequest#builder()}
*
*
* @param createVpcAssociationAuthorizationRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.CreateVpcAssociationAuthorizationRequest.Builder} to
* create a request. A complex type that contains information about the request to authorize associating a
* VPC with your private hosted zone. Authorization is only required when a private hosted zone and a VPC
* were created by using different accounts.
* @return Result of the CreateVPCAssociationAuthorization operation returned by the service.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws TooManyVpcAssociationAuthorizationsException
* You've created the maximum number of authorizations that can be created for the specified hosted zone. To
* authorize another VPC to be associated with the hosted zone, submit a
* DeleteVPCAssociationAuthorization request to remove an existing authorization. To get a list
* of existing authorizations, submit a ListVPCAssociationAuthorizations request.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidVpcIdException
* The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access
* this VPC.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.CreateVPCAssociationAuthorization
* @see AWS API Documentation
*/
default CreateVpcAssociationAuthorizationResponse createVPCAssociationAuthorization(
Consumer createVpcAssociationAuthorizationRequest)
throws ConcurrentModificationException, TooManyVpcAssociationAuthorizationsException, NoSuchHostedZoneException,
InvalidVpcIdException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return createVPCAssociationAuthorization(CreateVpcAssociationAuthorizationRequest.builder()
.applyMutation(createVpcAssociationAuthorizationRequest).build());
}
/**
*
* Deactivates a key-signing key (KSK) so that it will not be used for signing by DNSSEC. This operation changes the
* KSK status to INACTIVE.
*
*
* @param deactivateKeySigningKeyRequest
* @return Result of the DeactivateKeySigningKey operation returned by the service.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws NoSuchKeySigningKeyException
* The specified key-signing key (KSK) doesn't exist.
* @throws InvalidKeySigningKeyStatusException
* The key-signing key (KSK) status isn't valid or another KSK has the status INTERNAL_FAILURE.
* @throws InvalidSigningStatusException
* Your hosted zone status isn't valid for this operation. In the hosted zone, change the status to enable
* DNSSEC or disable DNSSEC.
* @throws KeySigningKeyInUseException
* The key-signing key (KSK) that you specified can't be deactivated because it's the only KSK for a
* currently-enabled DNSSEC. Disable DNSSEC signing, or add or enable another KSK.
* @throws KeySigningKeyInParentDsRecordException
* The key-signing key (KSK) is specified in a parent DS record.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeactivateKeySigningKey
* @see AWS API Documentation
*/
default DeactivateKeySigningKeyResponse deactivateKeySigningKey(DeactivateKeySigningKeyRequest deactivateKeySigningKeyRequest)
throws ConcurrentModificationException, NoSuchKeySigningKeyException, InvalidKeySigningKeyStatusException,
InvalidSigningStatusException, KeySigningKeyInUseException, KeySigningKeyInParentDsRecordException,
InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Deactivates a key-signing key (KSK) so that it will not be used for signing by DNSSEC. This operation changes the
* KSK status to INACTIVE.
*
*
*
* This is a convenience which creates an instance of the {@link DeactivateKeySigningKeyRequest.Builder} avoiding
* the need to create one manually via {@link DeactivateKeySigningKeyRequest#builder()}
*
*
* @param deactivateKeySigningKeyRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.DeactivateKeySigningKeyRequest.Builder} to create a
* request.
* @return Result of the DeactivateKeySigningKey operation returned by the service.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws NoSuchKeySigningKeyException
* The specified key-signing key (KSK) doesn't exist.
* @throws InvalidKeySigningKeyStatusException
* The key-signing key (KSK) status isn't valid or another KSK has the status INTERNAL_FAILURE.
* @throws InvalidSigningStatusException
* Your hosted zone status isn't valid for this operation. In the hosted zone, change the status to enable
* DNSSEC or disable DNSSEC.
* @throws KeySigningKeyInUseException
* The key-signing key (KSK) that you specified can't be deactivated because it's the only KSK for a
* currently-enabled DNSSEC. Disable DNSSEC signing, or add or enable another KSK.
* @throws KeySigningKeyInParentDsRecordException
* The key-signing key (KSK) is specified in a parent DS record.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeactivateKeySigningKey
* @see AWS API Documentation
*/
default DeactivateKeySigningKeyResponse deactivateKeySigningKey(
Consumer deactivateKeySigningKeyRequest)
throws ConcurrentModificationException, NoSuchKeySigningKeyException, InvalidKeySigningKeyStatusException,
InvalidSigningStatusException, KeySigningKeyInUseException, KeySigningKeyInParentDsRecordException,
InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return deactivateKeySigningKey(DeactivateKeySigningKeyRequest.builder().applyMutation(deactivateKeySigningKeyRequest)
.build());
}
/**
*
* Deletes a CIDR collection in the current Amazon Web Services account. The collection must be empty before it can
* be deleted.
*
*
* @param deleteCidrCollectionRequest
* @return Result of the DeleteCidrCollection operation returned by the service.
* @throws NoSuchCidrCollectionException
* The CIDR collection you specified, doesn't exist.
* @throws CidrCollectionInUseException
* This CIDR collection is in use, and isn't empty.
* @throws InvalidInputException
* The input is not valid.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteCidrCollection
* @see AWS
* API Documentation
*/
default DeleteCidrCollectionResponse deleteCidrCollection(DeleteCidrCollectionRequest deleteCidrCollectionRequest)
throws NoSuchCidrCollectionException, CidrCollectionInUseException, InvalidInputException,
ConcurrentModificationException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Deletes a CIDR collection in the current Amazon Web Services account. The collection must be empty before it can
* be deleted.
*
*
*
* This is a convenience which creates an instance of the {@link DeleteCidrCollectionRequest.Builder} avoiding the
* need to create one manually via {@link DeleteCidrCollectionRequest#builder()}
*
*
* @param deleteCidrCollectionRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.DeleteCidrCollectionRequest.Builder} to create a
* request.
* @return Result of the DeleteCidrCollection operation returned by the service.
* @throws NoSuchCidrCollectionException
* The CIDR collection you specified, doesn't exist.
* @throws CidrCollectionInUseException
* This CIDR collection is in use, and isn't empty.
* @throws InvalidInputException
* The input is not valid.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteCidrCollection
* @see AWS
* API Documentation
*/
default DeleteCidrCollectionResponse deleteCidrCollection(
Consumer deleteCidrCollectionRequest) throws NoSuchCidrCollectionException,
CidrCollectionInUseException, InvalidInputException, ConcurrentModificationException, AwsServiceException,
SdkClientException, Route53Exception {
return deleteCidrCollection(DeleteCidrCollectionRequest.builder().applyMutation(deleteCidrCollectionRequest).build());
}
/**
*
* Deletes a health check.
*
*
*
* Amazon Route 53 does not prevent you from deleting a health check even if the health check is associated with one
* or more resource record sets. If you delete a health check and you don't update the associated resource record
* sets, the future status of the health check can't be predicted and may change. This will affect the routing of
* DNS queries for your DNS failover configuration. For more information, see Replacing and Deleting Health Checks in the Amazon Route 53 Developer Guide.
*
*
*
* If you're using Cloud Map and you configured Cloud Map to create a Route 53 health check when you register an
* instance, you can't use the Route 53 DeleteHealthCheck command to delete the health check. The
* health check is deleted automatically when you deregister the instance; there can be a delay of several hours
* before the health check is deleted from Route 53.
*
*
* @param deleteHealthCheckRequest
* This action deletes a health check.
* @return Result of the DeleteHealthCheck operation returned by the service.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteHealthCheck
* @see AWS API
* Documentation
*/
default DeleteHealthCheckResponse deleteHealthCheck(DeleteHealthCheckRequest deleteHealthCheckRequest)
throws NoSuchHealthCheckException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Deletes a health check.
*
*
*
* Amazon Route 53 does not prevent you from deleting a health check even if the health check is associated with one
* or more resource record sets. If you delete a health check and you don't update the associated resource record
* sets, the future status of the health check can't be predicted and may change. This will affect the routing of
* DNS queries for your DNS failover configuration. For more information, see Replacing and Deleting Health Checks in the Amazon Route 53 Developer Guide.
*
*
*
* If you're using Cloud Map and you configured Cloud Map to create a Route 53 health check when you register an
* instance, you can't use the Route 53 DeleteHealthCheck command to delete the health check. The
* health check is deleted automatically when you deregister the instance; there can be a delay of several hours
* before the health check is deleted from Route 53.
*
*
*
* This is a convenience which creates an instance of the {@link DeleteHealthCheckRequest.Builder} avoiding the need
* to create one manually via {@link DeleteHealthCheckRequest#builder()}
*
*
* @param deleteHealthCheckRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.DeleteHealthCheckRequest.Builder} to create a
* request. This action deletes a health check.
* @return Result of the DeleteHealthCheck operation returned by the service.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteHealthCheck
* @see AWS API
* Documentation
*/
default DeleteHealthCheckResponse deleteHealthCheck(Consumer deleteHealthCheckRequest)
throws NoSuchHealthCheckException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return deleteHealthCheck(DeleteHealthCheckRequest.builder().applyMutation(deleteHealthCheckRequest).build());
}
/**
*
* Deletes a hosted zone.
*
*
* If the hosted zone was created by another service, such as Cloud Map, see Deleting Public Hosted Zones That Were Created by Another Service in the Amazon Route 53 Developer
* Guide for information about how to delete it. (The process is the same for public and private hosted zones
* that were created by another service.)
*
*
* If you want to keep your domain registration but you want to stop routing internet traffic to your website or web
* application, we recommend that you delete resource record sets in the hosted zone instead of deleting the hosted
* zone.
*
*
*
* If you delete a hosted zone, you can't undelete it. You must create a new hosted zone and update the name servers
* for your domain registration, which can require up to 48 hours to take effect. (If you delegated responsibility
* for a subdomain to a hosted zone and you delete the child hosted zone, you must update the name servers in the
* parent hosted zone.) In addition, if you delete a hosted zone, someone could hijack the domain and route traffic
* to their own resources using your domain name.
*
*
*
* If you want to avoid the monthly charge for the hosted zone, you can transfer DNS service for the domain to a
* free DNS service. When you transfer DNS service, you have to update the name servers for the domain registration.
* If the domain is registered with Route 53, see UpdateDomainNameservers for information about how to replace Route 53 name servers with name servers for the
* new DNS service. If the domain is registered with another registrar, use the method provided by the registrar to
* update name servers for the domain registration. For more information, perform an internet search on
* "free DNS service."
*
*
* You can delete a hosted zone only if it contains only the default SOA record and NS resource record sets. If the
* hosted zone contains other resource record sets, you must delete them before you can delete the hosted zone. If
* you try to delete a hosted zone that contains other resource record sets, the request fails, and Route 53 returns
* a HostedZoneNotEmpty error. For information about deleting records from your hosted zone, see
* ChangeResourceRecordSets.
*
*
* To verify that the hosted zone has been deleted, do one of the following:
*
*
* -
*
* Use the GetHostedZone action to request information about the hosted zone.
*
*
* -
*
* Use the ListHostedZones action to get a list of the hosted zones associated with the current Amazon
* Web Services account.
*
*
*
*
* @param deleteHostedZoneRequest
* A request to delete a hosted zone.
* @return Result of the DeleteHostedZone operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws HostedZoneNotEmptyException
* The hosted zone contains resource records that are not SOA or NS records.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidDomainNameException
* The specified domain name is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteHostedZone
* @see AWS API
* Documentation
*/
default DeleteHostedZoneResponse deleteHostedZone(DeleteHostedZoneRequest deleteHostedZoneRequest)
throws NoSuchHostedZoneException, HostedZoneNotEmptyException, PriorRequestNotCompleteException,
InvalidInputException, InvalidDomainNameException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Deletes a hosted zone.
*
*
* If the hosted zone was created by another service, such as Cloud Map, see Deleting Public Hosted Zones That Were Created by Another Service in the Amazon Route 53 Developer
* Guide for information about how to delete it. (The process is the same for public and private hosted zones
* that were created by another service.)
*
*
* If you want to keep your domain registration but you want to stop routing internet traffic to your website or web
* application, we recommend that you delete resource record sets in the hosted zone instead of deleting the hosted
* zone.
*
*
*
* If you delete a hosted zone, you can't undelete it. You must create a new hosted zone and update the name servers
* for your domain registration, which can require up to 48 hours to take effect. (If you delegated responsibility
* for a subdomain to a hosted zone and you delete the child hosted zone, you must update the name servers in the
* parent hosted zone.) In addition, if you delete a hosted zone, someone could hijack the domain and route traffic
* to their own resources using your domain name.
*
*
*
* If you want to avoid the monthly charge for the hosted zone, you can transfer DNS service for the domain to a
* free DNS service. When you transfer DNS service, you have to update the name servers for the domain registration.
* If the domain is registered with Route 53, see UpdateDomainNameservers for information about how to replace Route 53 name servers with name servers for the
* new DNS service. If the domain is registered with another registrar, use the method provided by the registrar to
* update name servers for the domain registration. For more information, perform an internet search on
* "free DNS service."
*
*
* You can delete a hosted zone only if it contains only the default SOA record and NS resource record sets. If the
* hosted zone contains other resource record sets, you must delete them before you can delete the hosted zone. If
* you try to delete a hosted zone that contains other resource record sets, the request fails, and Route 53 returns
* a HostedZoneNotEmpty error. For information about deleting records from your hosted zone, see
* ChangeResourceRecordSets.
*
*
* To verify that the hosted zone has been deleted, do one of the following:
*
*
* -
*
* Use the GetHostedZone action to request information about the hosted zone.
*
*
* -
*
* Use the ListHostedZones action to get a list of the hosted zones associated with the current Amazon
* Web Services account.
*
*
*
*
*
* This is a convenience which creates an instance of the {@link DeleteHostedZoneRequest.Builder} avoiding the need
* to create one manually via {@link DeleteHostedZoneRequest#builder()}
*
*
* @param deleteHostedZoneRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.DeleteHostedZoneRequest.Builder} to create a request.
* A request to delete a hosted zone.
* @return Result of the DeleteHostedZone operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws HostedZoneNotEmptyException
* The hosted zone contains resource records that are not SOA or NS records.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidDomainNameException
* The specified domain name is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteHostedZone
* @see AWS API
* Documentation
*/
default DeleteHostedZoneResponse deleteHostedZone(Consumer deleteHostedZoneRequest)
throws NoSuchHostedZoneException, HostedZoneNotEmptyException, PriorRequestNotCompleteException,
InvalidInputException, InvalidDomainNameException, AwsServiceException, SdkClientException, Route53Exception {
return deleteHostedZone(DeleteHostedZoneRequest.builder().applyMutation(deleteHostedZoneRequest).build());
}
/**
*
* Deletes a key-signing key (KSK). Before you can delete a KSK, you must deactivate it. The KSK must be deactivated
* before you can delete it regardless of whether the hosted zone is enabled for DNSSEC signing.
*
*
* You can use
* DeactivateKeySigningKey to deactivate the key before you delete it.
*
*
* Use GetDNSSEC to verify
* that the KSK is in an INACTIVE status.
*
*
* @param deleteKeySigningKeyRequest
* @return Result of the DeleteKeySigningKey operation returned by the service.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws NoSuchKeySigningKeyException
* The specified key-signing key (KSK) doesn't exist.
* @throws InvalidKeySigningKeyStatusException
* The key-signing key (KSK) status isn't valid or another KSK has the status INTERNAL_FAILURE.
* @throws InvalidSigningStatusException
* Your hosted zone status isn't valid for this operation. In the hosted zone, change the status to enable
* DNSSEC or disable DNSSEC.
* @throws InvalidKmsArnException
* The KeyManagementServiceArn that you specified isn't valid to use with DNSSEC signing.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteKeySigningKey
* @see AWS
* API Documentation
*/
default DeleteKeySigningKeyResponse deleteKeySigningKey(DeleteKeySigningKeyRequest deleteKeySigningKeyRequest)
throws ConcurrentModificationException, NoSuchKeySigningKeyException, InvalidKeySigningKeyStatusException,
InvalidSigningStatusException, InvalidKmsArnException, InvalidInputException, AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Deletes a key-signing key (KSK). Before you can delete a KSK, you must deactivate it. The KSK must be deactivated
* before you can delete it regardless of whether the hosted zone is enabled for DNSSEC signing.
*
*
* You can use
* DeactivateKeySigningKey to deactivate the key before you delete it.
*
*
* Use GetDNSSEC to verify
* that the KSK is in an INACTIVE status.
*
*
*
* This is a convenience which creates an instance of the {@link DeleteKeySigningKeyRequest.Builder} avoiding the
* need to create one manually via {@link DeleteKeySigningKeyRequest#builder()}
*
*
* @param deleteKeySigningKeyRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.DeleteKeySigningKeyRequest.Builder} to create a
* request.
* @return Result of the DeleteKeySigningKey operation returned by the service.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws NoSuchKeySigningKeyException
* The specified key-signing key (KSK) doesn't exist.
* @throws InvalidKeySigningKeyStatusException
* The key-signing key (KSK) status isn't valid or another KSK has the status INTERNAL_FAILURE.
* @throws InvalidSigningStatusException
* Your hosted zone status isn't valid for this operation. In the hosted zone, change the status to enable
* DNSSEC or disable DNSSEC.
* @throws InvalidKmsArnException
* The KeyManagementServiceArn that you specified isn't valid to use with DNSSEC signing.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteKeySigningKey
* @see AWS
* API Documentation
*/
default DeleteKeySigningKeyResponse deleteKeySigningKey(
Consumer deleteKeySigningKeyRequest) throws ConcurrentModificationException,
NoSuchKeySigningKeyException, InvalidKeySigningKeyStatusException, InvalidSigningStatusException,
InvalidKmsArnException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return deleteKeySigningKey(DeleteKeySigningKeyRequest.builder().applyMutation(deleteKeySigningKeyRequest).build());
}
/**
*
* Deletes a configuration for DNS query logging. If you delete a configuration, Amazon Route 53 stops sending query
* logs to CloudWatch Logs. Route 53 doesn't delete any logs that are already in CloudWatch Logs.
*
*
* For more information about DNS query logs, see CreateQueryLoggingConfig.
*
*
* @param deleteQueryLoggingConfigRequest
* @return Result of the DeleteQueryLoggingConfig operation returned by the service.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws NoSuchQueryLoggingConfigException
* There is no DNS query logging configuration with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteQueryLoggingConfig
* @see AWS API Documentation
*/
default DeleteQueryLoggingConfigResponse deleteQueryLoggingConfig(
DeleteQueryLoggingConfigRequest deleteQueryLoggingConfigRequest) throws ConcurrentModificationException,
NoSuchQueryLoggingConfigException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Deletes a configuration for DNS query logging. If you delete a configuration, Amazon Route 53 stops sending query
* logs to CloudWatch Logs. Route 53 doesn't delete any logs that are already in CloudWatch Logs.
*
*
* For more information about DNS query logs, see CreateQueryLoggingConfig.
*
*
*
* This is a convenience which creates an instance of the {@link DeleteQueryLoggingConfigRequest.Builder} avoiding
* the need to create one manually via {@link DeleteQueryLoggingConfigRequest#builder()}
*
*
* @param deleteQueryLoggingConfigRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.DeleteQueryLoggingConfigRequest.Builder} to create a
* request.
* @return Result of the DeleteQueryLoggingConfig operation returned by the service.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws NoSuchQueryLoggingConfigException
* There is no DNS query logging configuration with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteQueryLoggingConfig
* @see AWS API Documentation
*/
default DeleteQueryLoggingConfigResponse deleteQueryLoggingConfig(
Consumer deleteQueryLoggingConfigRequest)
throws ConcurrentModificationException, NoSuchQueryLoggingConfigException, InvalidInputException,
AwsServiceException, SdkClientException, Route53Exception {
return deleteQueryLoggingConfig(DeleteQueryLoggingConfigRequest.builder().applyMutation(deleteQueryLoggingConfigRequest)
.build());
}
/**
*
* Deletes a reusable delegation set.
*
*
*
* You can delete a reusable delegation set only if it isn't associated with any hosted zones.
*
*
*
* To verify that the reusable delegation set is not associated with any hosted zones, submit a GetReusableDelegationSet request and specify the ID of the reusable delegation set that you want to delete.
*
*
* @param deleteReusableDelegationSetRequest
* A request to delete a reusable delegation set.
* @return Result of the DeleteReusableDelegationSet operation returned by the service.
* @throws NoSuchDelegationSetException
* A reusable delegation set with the specified ID does not exist.
* @throws DelegationSetInUseException
* The specified delegation contains associated hosted zones which must be deleted before the reusable
* delegation set can be deleted.
* @throws DelegationSetNotReusableException
* A reusable delegation set with the specified ID does not exist.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteReusableDelegationSet
* @see AWS API Documentation
*/
default DeleteReusableDelegationSetResponse deleteReusableDelegationSet(
DeleteReusableDelegationSetRequest deleteReusableDelegationSetRequest) throws NoSuchDelegationSetException,
DelegationSetInUseException, DelegationSetNotReusableException, InvalidInputException, AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Deletes a reusable delegation set.
*
*
*
* You can delete a reusable delegation set only if it isn't associated with any hosted zones.
*
*
*
* To verify that the reusable delegation set is not associated with any hosted zones, submit a GetReusableDelegationSet request and specify the ID of the reusable delegation set that you want to delete.
*
*
*
* This is a convenience which creates an instance of the {@link DeleteReusableDelegationSetRequest.Builder}
* avoiding the need to create one manually via {@link DeleteReusableDelegationSetRequest#builder()}
*
*
* @param deleteReusableDelegationSetRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.DeleteReusableDelegationSetRequest.Builder} to create
* a request. A request to delete a reusable delegation set.
* @return Result of the DeleteReusableDelegationSet operation returned by the service.
* @throws NoSuchDelegationSetException
* A reusable delegation set with the specified ID does not exist.
* @throws DelegationSetInUseException
* The specified delegation contains associated hosted zones which must be deleted before the reusable
* delegation set can be deleted.
* @throws DelegationSetNotReusableException
* A reusable delegation set with the specified ID does not exist.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteReusableDelegationSet
* @see AWS API Documentation
*/
default DeleteReusableDelegationSetResponse deleteReusableDelegationSet(
Consumer deleteReusableDelegationSetRequest)
throws NoSuchDelegationSetException, DelegationSetInUseException, DelegationSetNotReusableException,
InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return deleteReusableDelegationSet(DeleteReusableDelegationSetRequest.builder()
.applyMutation(deleteReusableDelegationSetRequest).build());
}
/**
*
* Deletes a traffic policy.
*
*
* When you delete a traffic policy, Route 53 sets a flag on the policy to indicate that it has been deleted.
* However, Route 53 never fully deletes the traffic policy. Note the following:
*
*
* -
*
* Deleted traffic policies aren't listed if you run ListTrafficPolicies.
*
*
* -
*
* There's no way to get a list of deleted policies.
*
*
* -
*
* If you retain the ID of the policy, you can get information about the policy, including the traffic policy
* document, by running GetTrafficPolicy.
*
*
*
*
* @param deleteTrafficPolicyRequest
* A request to delete a specified traffic policy version.
* @return Result of the DeleteTrafficPolicy operation returned by the service.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws TrafficPolicyInUseException
* One or more traffic policy instances were created by using the specified traffic policy.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteTrafficPolicy
* @see AWS
* API Documentation
*/
default DeleteTrafficPolicyResponse deleteTrafficPolicy(DeleteTrafficPolicyRequest deleteTrafficPolicyRequest)
throws NoSuchTrafficPolicyException, InvalidInputException, TrafficPolicyInUseException,
ConcurrentModificationException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Deletes a traffic policy.
*
*
* When you delete a traffic policy, Route 53 sets a flag on the policy to indicate that it has been deleted.
* However, Route 53 never fully deletes the traffic policy. Note the following:
*
*
* -
*
* Deleted traffic policies aren't listed if you run ListTrafficPolicies.
*
*
* -
*
* There's no way to get a list of deleted policies.
*
*
* -
*
* If you retain the ID of the policy, you can get information about the policy, including the traffic policy
* document, by running GetTrafficPolicy.
*
*
*
*
*
* This is a convenience which creates an instance of the {@link DeleteTrafficPolicyRequest.Builder} avoiding the
* need to create one manually via {@link DeleteTrafficPolicyRequest#builder()}
*
*
* @param deleteTrafficPolicyRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.DeleteTrafficPolicyRequest.Builder} to create a
* request. A request to delete a specified traffic policy version.
* @return Result of the DeleteTrafficPolicy operation returned by the service.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws TrafficPolicyInUseException
* One or more traffic policy instances were created by using the specified traffic policy.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteTrafficPolicy
* @see AWS
* API Documentation
*/
default DeleteTrafficPolicyResponse deleteTrafficPolicy(
Consumer deleteTrafficPolicyRequest) throws NoSuchTrafficPolicyException,
InvalidInputException, TrafficPolicyInUseException, ConcurrentModificationException, AwsServiceException,
SdkClientException, Route53Exception {
return deleteTrafficPolicy(DeleteTrafficPolicyRequest.builder().applyMutation(deleteTrafficPolicyRequest).build());
}
/**
*
* Deletes a traffic policy instance and all of the resource record sets that Amazon Route 53 created when you
* created the instance.
*
*
*
* In the Route 53 console, traffic policy instances are known as policy records.
*
*
*
* @param deleteTrafficPolicyInstanceRequest
* A request to delete a specified traffic policy instance.
* @return Result of the DeleteTrafficPolicyInstance operation returned by the service.
* @throws NoSuchTrafficPolicyInstanceException
* No traffic policy instance exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteTrafficPolicyInstance
* @see AWS API Documentation
*/
default DeleteTrafficPolicyInstanceResponse deleteTrafficPolicyInstance(
DeleteTrafficPolicyInstanceRequest deleteTrafficPolicyInstanceRequest) throws NoSuchTrafficPolicyInstanceException,
InvalidInputException, PriorRequestNotCompleteException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Deletes a traffic policy instance and all of the resource record sets that Amazon Route 53 created when you
* created the instance.
*
*
*
* In the Route 53 console, traffic policy instances are known as policy records.
*
*
*
* This is a convenience which creates an instance of the {@link DeleteTrafficPolicyInstanceRequest.Builder}
* avoiding the need to create one manually via {@link DeleteTrafficPolicyInstanceRequest#builder()}
*
*
* @param deleteTrafficPolicyInstanceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.DeleteTrafficPolicyInstanceRequest.Builder} to create
* a request. A request to delete a specified traffic policy instance.
* @return Result of the DeleteTrafficPolicyInstance operation returned by the service.
* @throws NoSuchTrafficPolicyInstanceException
* No traffic policy instance exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteTrafficPolicyInstance
* @see AWS API Documentation
*/
default DeleteTrafficPolicyInstanceResponse deleteTrafficPolicyInstance(
Consumer deleteTrafficPolicyInstanceRequest)
throws NoSuchTrafficPolicyInstanceException, InvalidInputException, PriorRequestNotCompleteException,
AwsServiceException, SdkClientException, Route53Exception {
return deleteTrafficPolicyInstance(DeleteTrafficPolicyInstanceRequest.builder()
.applyMutation(deleteTrafficPolicyInstanceRequest).build());
}
/**
*
* Removes authorization to submit an AssociateVPCWithHostedZone request to associate a specified VPC
* with a hosted zone that was created by a different account. You must use the account that created the hosted zone
* to submit a DeleteVPCAssociationAuthorization request.
*
*
*
* Sending this request only prevents the Amazon Web Services account that created the VPC from associating the VPC
* with the Amazon Route 53 hosted zone in the future. If the VPC is already associated with the hosted zone,
* DeleteVPCAssociationAuthorization won't disassociate the VPC from the hosted zone. If you want to
* delete an existing association, use DisassociateVPCFromHostedZone.
*
*
*
* @param deleteVpcAssociationAuthorizationRequest
* A complex type that contains information about the request to remove authorization to associate a VPC that
* was created by one Amazon Web Services account with a hosted zone that was created with a different Amazon
* Web Services account.
* @return Result of the DeleteVPCAssociationAuthorization operation returned by the service.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws VpcAssociationAuthorizationNotFoundException
* The VPC that you specified is not authorized to be associated with the hosted zone.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidVpcIdException
* The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access
* this VPC.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteVPCAssociationAuthorization
* @see AWS API Documentation
*/
default DeleteVpcAssociationAuthorizationResponse deleteVPCAssociationAuthorization(
DeleteVpcAssociationAuthorizationRequest deleteVpcAssociationAuthorizationRequest)
throws ConcurrentModificationException, VpcAssociationAuthorizationNotFoundException, NoSuchHostedZoneException,
InvalidVpcIdException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Removes authorization to submit an AssociateVPCWithHostedZone request to associate a specified VPC
* with a hosted zone that was created by a different account. You must use the account that created the hosted zone
* to submit a DeleteVPCAssociationAuthorization request.
*
*
*
* Sending this request only prevents the Amazon Web Services account that created the VPC from associating the VPC
* with the Amazon Route 53 hosted zone in the future. If the VPC is already associated with the hosted zone,
* DeleteVPCAssociationAuthorization won't disassociate the VPC from the hosted zone. If you want to
* delete an existing association, use DisassociateVPCFromHostedZone.
*
*
*
* This is a convenience which creates an instance of the {@link DeleteVpcAssociationAuthorizationRequest.Builder}
* avoiding the need to create one manually via {@link DeleteVpcAssociationAuthorizationRequest#builder()}
*
*
* @param deleteVpcAssociationAuthorizationRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.DeleteVpcAssociationAuthorizationRequest.Builder} to
* create a request. A complex type that contains information about the request to remove authorization to
* associate a VPC that was created by one Amazon Web Services account with a hosted zone that was created
* with a different Amazon Web Services account.
* @return Result of the DeleteVPCAssociationAuthorization operation returned by the service.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws VpcAssociationAuthorizationNotFoundException
* The VPC that you specified is not authorized to be associated with the hosted zone.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidVpcIdException
* The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access
* this VPC.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DeleteVPCAssociationAuthorization
* @see AWS API Documentation
*/
default DeleteVpcAssociationAuthorizationResponse deleteVPCAssociationAuthorization(
Consumer deleteVpcAssociationAuthorizationRequest)
throws ConcurrentModificationException, VpcAssociationAuthorizationNotFoundException, NoSuchHostedZoneException,
InvalidVpcIdException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return deleteVPCAssociationAuthorization(DeleteVpcAssociationAuthorizationRequest.builder()
.applyMutation(deleteVpcAssociationAuthorizationRequest).build());
}
/**
*
* Disables DNSSEC signing in a specific hosted zone. This action does not deactivate any key-signing keys (KSKs)
* that are active in the hosted zone.
*
*
* @param disableHostedZoneDnssecRequest
* @return Result of the DisableHostedZoneDNSSEC operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidArgumentException
* Parameter name is not valid.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws KeySigningKeyInParentDsRecordException
* The key-signing key (KSK) is specified in a parent DS record.
* @throws DnssecNotFoundException
* The hosted zone doesn't have any DNSSEC resources.
* @throws InvalidKeySigningKeyStatusException
* The key-signing key (KSK) status isn't valid or another KSK has the status INTERNAL_FAILURE.
* @throws InvalidKmsArnException
* The KeyManagementServiceArn that you specified isn't valid to use with DNSSEC signing.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DisableHostedZoneDNSSEC
* @see AWS API Documentation
*/
default DisableHostedZoneDnssecResponse disableHostedZoneDNSSEC(DisableHostedZoneDnssecRequest disableHostedZoneDnssecRequest)
throws NoSuchHostedZoneException, InvalidArgumentException, ConcurrentModificationException,
KeySigningKeyInParentDsRecordException, DnssecNotFoundException, InvalidKeySigningKeyStatusException,
InvalidKmsArnException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Disables DNSSEC signing in a specific hosted zone. This action does not deactivate any key-signing keys (KSKs)
* that are active in the hosted zone.
*
*
*
* This is a convenience which creates an instance of the {@link DisableHostedZoneDnssecRequest.Builder} avoiding
* the need to create one manually via {@link DisableHostedZoneDnssecRequest#builder()}
*
*
* @param disableHostedZoneDnssecRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.DisableHostedZoneDnssecRequest.Builder} to create a
* request.
* @return Result of the DisableHostedZoneDNSSEC operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidArgumentException
* Parameter name is not valid.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws KeySigningKeyInParentDsRecordException
* The key-signing key (KSK) is specified in a parent DS record.
* @throws DnssecNotFoundException
* The hosted zone doesn't have any DNSSEC resources.
* @throws InvalidKeySigningKeyStatusException
* The key-signing key (KSK) status isn't valid or another KSK has the status INTERNAL_FAILURE.
* @throws InvalidKmsArnException
* The KeyManagementServiceArn that you specified isn't valid to use with DNSSEC signing.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DisableHostedZoneDNSSEC
* @see AWS API Documentation
*/
default DisableHostedZoneDnssecResponse disableHostedZoneDNSSEC(
Consumer disableHostedZoneDnssecRequest) throws NoSuchHostedZoneException,
InvalidArgumentException, ConcurrentModificationException, KeySigningKeyInParentDsRecordException,
DnssecNotFoundException, InvalidKeySigningKeyStatusException, InvalidKmsArnException, InvalidInputException,
AwsServiceException, SdkClientException, Route53Exception {
return disableHostedZoneDNSSEC(DisableHostedZoneDnssecRequest.builder().applyMutation(disableHostedZoneDnssecRequest)
.build());
}
/**
*
* Disassociates an Amazon Virtual Private Cloud (Amazon VPC) from an Amazon Route 53 private hosted zone. Note the
* following:
*
*
* -
*
* You can't disassociate the last Amazon VPC from a private hosted zone.
*
*
* -
*
* You can't convert a private hosted zone into a public hosted zone.
*
*
* -
*
* You can submit a DisassociateVPCFromHostedZone request using either the account that created the
* hosted zone or the account that created the Amazon VPC.
*
*
* -
*
* Some services, such as Cloud Map and Amazon Elastic File System (Amazon EFS) automatically create hosted zones
* and associate VPCs with the hosted zones. A service can create a hosted zone using your account or using its own
* account. You can disassociate a VPC from a hosted zone only if the service created the hosted zone using your
* account.
*
*
* When you run
* DisassociateVPCFromHostedZone, if the hosted zone has a value for OwningAccount, you can use
* DisassociateVPCFromHostedZone. If the hosted zone has a value for OwningService, you
* can't use DisassociateVPCFromHostedZone.
*
*
*
*
*
* When revoking access, the hosted zone and the Amazon VPC must belong to the same partition. A partition is a
* group of Amazon Web Services Regions. Each Amazon Web Services account is scoped to one partition.
*
*
* The following are the supported partitions:
*
*
* -
*
* aws - Amazon Web Services Regions
*
*
* -
*
* aws-cn - China Regions
*
*
* -
*
* aws-us-gov - Amazon Web Services GovCloud (US) Region
*
*
*
*
* For more information, see Access Management in the
* Amazon Web Services General Reference.
*
*
*
* @param disassociateVpcFromHostedZoneRequest
* A complex type that contains information about the VPC that you want to disassociate from a specified
* private hosted zone.
* @return Result of the DisassociateVPCFromHostedZone operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidVpcIdException
* The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access
* this VPC.
* @throws VpcAssociationNotFoundException
* The specified VPC and hosted zone are not currently associated.
* @throws LastVpcAssociationException
* The VPC that you're trying to disassociate from the private hosted zone is the last VPC that is
* associated with the hosted zone. Amazon Route 53 doesn't support disassociating the last VPC from a
* hosted zone.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DisassociateVPCFromHostedZone
* @see AWS API Documentation
*/
default DisassociateVpcFromHostedZoneResponse disassociateVPCFromHostedZone(
DisassociateVpcFromHostedZoneRequest disassociateVpcFromHostedZoneRequest) throws NoSuchHostedZoneException,
InvalidVpcIdException, VpcAssociationNotFoundException, LastVpcAssociationException, InvalidInputException,
AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Disassociates an Amazon Virtual Private Cloud (Amazon VPC) from an Amazon Route 53 private hosted zone. Note the
* following:
*
*
* -
*
* You can't disassociate the last Amazon VPC from a private hosted zone.
*
*
* -
*
* You can't convert a private hosted zone into a public hosted zone.
*
*
* -
*
* You can submit a DisassociateVPCFromHostedZone request using either the account that created the
* hosted zone or the account that created the Amazon VPC.
*
*
* -
*
* Some services, such as Cloud Map and Amazon Elastic File System (Amazon EFS) automatically create hosted zones
* and associate VPCs with the hosted zones. A service can create a hosted zone using your account or using its own
* account. You can disassociate a VPC from a hosted zone only if the service created the hosted zone using your
* account.
*
*
* When you run
* DisassociateVPCFromHostedZone, if the hosted zone has a value for OwningAccount, you can use
* DisassociateVPCFromHostedZone. If the hosted zone has a value for OwningService, you
* can't use DisassociateVPCFromHostedZone.
*
*
*
*
*
* When revoking access, the hosted zone and the Amazon VPC must belong to the same partition. A partition is a
* group of Amazon Web Services Regions. Each Amazon Web Services account is scoped to one partition.
*
*
* The following are the supported partitions:
*
*
* -
*
* aws - Amazon Web Services Regions
*
*
* -
*
* aws-cn - China Regions
*
*
* -
*
* aws-us-gov - Amazon Web Services GovCloud (US) Region
*
*
*
*
* For more information, see Access Management in the
* Amazon Web Services General Reference.
*
*
*
* This is a convenience which creates an instance of the {@link DisassociateVpcFromHostedZoneRequest.Builder}
* avoiding the need to create one manually via {@link DisassociateVpcFromHostedZoneRequest#builder()}
*
*
* @param disassociateVpcFromHostedZoneRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.DisassociateVpcFromHostedZoneRequest.Builder} to
* create a request. A complex type that contains information about the VPC that you want to disassociate
* from a specified private hosted zone.
* @return Result of the DisassociateVPCFromHostedZone operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidVpcIdException
* The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access
* this VPC.
* @throws VpcAssociationNotFoundException
* The specified VPC and hosted zone are not currently associated.
* @throws LastVpcAssociationException
* The VPC that you're trying to disassociate from the private hosted zone is the last VPC that is
* associated with the hosted zone. Amazon Route 53 doesn't support disassociating the last VPC from a
* hosted zone.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.DisassociateVPCFromHostedZone
* @see AWS API Documentation
*/
default DisassociateVpcFromHostedZoneResponse disassociateVPCFromHostedZone(
Consumer disassociateVpcFromHostedZoneRequest)
throws NoSuchHostedZoneException, InvalidVpcIdException, VpcAssociationNotFoundException,
LastVpcAssociationException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return disassociateVPCFromHostedZone(DisassociateVpcFromHostedZoneRequest.builder()
.applyMutation(disassociateVpcFromHostedZoneRequest).build());
}
/**
*
* Enables DNSSEC signing in a specific hosted zone.
*
*
* @param enableHostedZoneDnssecRequest
* @return Result of the EnableHostedZoneDNSSEC operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidArgumentException
* Parameter name is not valid.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws KeySigningKeyWithActiveStatusNotFoundException
* A key-signing key (KSK) with ACTIVE status wasn't found.
* @throws InvalidKmsArnException
* The KeyManagementServiceArn that you specified isn't valid to use with DNSSEC signing.
* @throws HostedZonePartiallyDelegatedException
* The hosted zone nameservers don't match the parent nameservers. The hosted zone and parent must have the
* same nameservers.
* @throws DnssecNotFoundException
* The hosted zone doesn't have any DNSSEC resources.
* @throws InvalidKeySigningKeyStatusException
* The key-signing key (KSK) status isn't valid or another KSK has the status INTERNAL_FAILURE.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.EnableHostedZoneDNSSEC
* @see AWS API Documentation
*/
default EnableHostedZoneDnssecResponse enableHostedZoneDNSSEC(EnableHostedZoneDnssecRequest enableHostedZoneDnssecRequest)
throws NoSuchHostedZoneException, InvalidArgumentException, ConcurrentModificationException,
KeySigningKeyWithActiveStatusNotFoundException, InvalidKmsArnException, HostedZonePartiallyDelegatedException,
DnssecNotFoundException, InvalidKeySigningKeyStatusException, InvalidInputException, AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Enables DNSSEC signing in a specific hosted zone.
*
*
*
* This is a convenience which creates an instance of the {@link EnableHostedZoneDnssecRequest.Builder} avoiding the
* need to create one manually via {@link EnableHostedZoneDnssecRequest#builder()}
*
*
* @param enableHostedZoneDnssecRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.EnableHostedZoneDnssecRequest.Builder} to create a
* request.
* @return Result of the EnableHostedZoneDNSSEC operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidArgumentException
* Parameter name is not valid.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws KeySigningKeyWithActiveStatusNotFoundException
* A key-signing key (KSK) with ACTIVE status wasn't found.
* @throws InvalidKmsArnException
* The KeyManagementServiceArn that you specified isn't valid to use with DNSSEC signing.
* @throws HostedZonePartiallyDelegatedException
* The hosted zone nameservers don't match the parent nameservers. The hosted zone and parent must have the
* same nameservers.
* @throws DnssecNotFoundException
* The hosted zone doesn't have any DNSSEC resources.
* @throws InvalidKeySigningKeyStatusException
* The key-signing key (KSK) status isn't valid or another KSK has the status INTERNAL_FAILURE.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.EnableHostedZoneDNSSEC
* @see AWS API Documentation
*/
default EnableHostedZoneDnssecResponse enableHostedZoneDNSSEC(
Consumer enableHostedZoneDnssecRequest) throws NoSuchHostedZoneException,
InvalidArgumentException, ConcurrentModificationException, KeySigningKeyWithActiveStatusNotFoundException,
InvalidKmsArnException, HostedZonePartiallyDelegatedException, DnssecNotFoundException,
InvalidKeySigningKeyStatusException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return enableHostedZoneDNSSEC(EnableHostedZoneDnssecRequest.builder().applyMutation(enableHostedZoneDnssecRequest)
.build());
}
/**
*
* Gets the specified limit for the current account, for example, the maximum number of health checks that you can
* create using the account.
*
*
* For the default limit, see Limits in the Amazon
* Route 53 Developer Guide. To request a higher limit, open a case.
*
*
*
* You can also view account limits in Amazon Web Services Trusted Advisor. Sign in to the Amazon Web Services
* Management Console and open the Trusted Advisor console at https://console.aws.amazon.com/trustedadvisor/. Then
* choose Service limits in the navigation pane.
*
*
*
* @param getAccountLimitRequest
* A complex type that contains information about the request to create a hosted zone.
* @return Result of the GetAccountLimit operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetAccountLimit
* @see AWS API
* Documentation
*/
default GetAccountLimitResponse getAccountLimit(GetAccountLimitRequest getAccountLimitRequest) throws InvalidInputException,
AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets the specified limit for the current account, for example, the maximum number of health checks that you can
* create using the account.
*
*
* For the default limit, see Limits in the Amazon
* Route 53 Developer Guide. To request a higher limit, open a case.
*
*
*
* You can also view account limits in Amazon Web Services Trusted Advisor. Sign in to the Amazon Web Services
* Management Console and open the Trusted Advisor console at https://console.aws.amazon.com/trustedadvisor/. Then
* choose Service limits in the navigation pane.
*
*
*
* This is a convenience which creates an instance of the {@link GetAccountLimitRequest.Builder} avoiding the need
* to create one manually via {@link GetAccountLimitRequest#builder()}
*
*
* @param getAccountLimitRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetAccountLimitRequest.Builder} to create a request.
* A complex type that contains information about the request to create a hosted zone.
* @return Result of the GetAccountLimit operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetAccountLimit
* @see AWS API
* Documentation
*/
default GetAccountLimitResponse getAccountLimit(Consumer getAccountLimitRequest)
throws InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return getAccountLimit(GetAccountLimitRequest.builder().applyMutation(getAccountLimitRequest).build());
}
/**
*
* Returns the current status of a change batch request. The status is one of the following values:
*
*
* -
*
* PENDING indicates that the changes in this request have not propagated to all Amazon Route 53 DNS
* servers managing the hosted zone. This is the initial status of all change batch requests.
*
*
* -
*
* INSYNC indicates that the changes have propagated to all Route 53 DNS servers managing the hosted
* zone.
*
*
*
*
* @param getChangeRequest
* The input for a GetChange request.
* @return Result of the GetChange operation returned by the service.
* @throws NoSuchChangeException
* A change with the specified change ID does not exist.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetChange
* @see AWS API
* Documentation
*/
default GetChangeResponse getChange(GetChangeRequest getChangeRequest) throws NoSuchChangeException, InvalidInputException,
AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Returns the current status of a change batch request. The status is one of the following values:
*
*
* -
*
* PENDING indicates that the changes in this request have not propagated to all Amazon Route 53 DNS
* servers managing the hosted zone. This is the initial status of all change batch requests.
*
*
* -
*
* INSYNC indicates that the changes have propagated to all Route 53 DNS servers managing the hosted
* zone.
*
*
*
*
*
* This is a convenience which creates an instance of the {@link GetChangeRequest.Builder} avoiding the need to
* create one manually via {@link GetChangeRequest#builder()}
*
*
* @param getChangeRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetChangeRequest.Builder} to create a request. The
* input for a GetChange request.
* @return Result of the GetChange operation returned by the service.
* @throws NoSuchChangeException
* A change with the specified change ID does not exist.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetChange
* @see AWS API
* Documentation
*/
default GetChangeResponse getChange(Consumer getChangeRequest) throws NoSuchChangeException,
InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return getChange(GetChangeRequest.builder().applyMutation(getChangeRequest).build());
}
/**
*
* Route 53 does not perform authorization for this API because it retrieves information that is already available
* to the public.
*
*
*
* GetCheckerIpRanges still works, but we recommend that you download ip-ranges.json, which includes IP
* address ranges for all Amazon Web Services services. For more information, see IP Address Ranges of
* Amazon Route 53 Servers in the Amazon Route 53 Developer Guide.
*
*
*
* @param getCheckerIpRangesRequest
* Empty request.
* @return Result of the GetCheckerIpRanges operation returned by the service.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetCheckerIpRanges
* @see AWS
* API Documentation
*/
default GetCheckerIpRangesResponse getCheckerIpRanges(GetCheckerIpRangesRequest getCheckerIpRangesRequest)
throws AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Route 53 does not perform authorization for this API because it retrieves information that is already available
* to the public.
*
*
*
* GetCheckerIpRanges still works, but we recommend that you download ip-ranges.json, which includes IP
* address ranges for all Amazon Web Services services. For more information, see IP Address Ranges of
* Amazon Route 53 Servers in the Amazon Route 53 Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link GetCheckerIpRangesRequest.Builder} avoiding the
* need to create one manually via {@link GetCheckerIpRangesRequest#builder()}
*
*
* @param getCheckerIpRangesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetCheckerIpRangesRequest.Builder} to create a
* request. Empty request.
* @return Result of the GetCheckerIpRanges operation returned by the service.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetCheckerIpRanges
* @see AWS
* API Documentation
*/
default GetCheckerIpRangesResponse getCheckerIpRanges(Consumer getCheckerIpRangesRequest)
throws AwsServiceException, SdkClientException, Route53Exception {
return getCheckerIpRanges(GetCheckerIpRangesRequest.builder().applyMutation(getCheckerIpRangesRequest).build());
}
/**
*
* Route 53 does not perform authorization for this API because it retrieves information that is already available
* to the public.
*
*
*
* GetCheckerIpRanges still works, but we recommend that you download ip-ranges.json, which includes IP
* address ranges for all Amazon Web Services services. For more information, see IP Address Ranges of
* Amazon Route 53 Servers in the Amazon Route 53 Developer Guide.
*
*
*
* @return Result of the GetCheckerIpRanges operation returned by the service.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetCheckerIpRanges
* @see #getCheckerIpRanges(GetCheckerIpRangesRequest)
* @see AWS
* API Documentation
*/
default GetCheckerIpRangesResponse getCheckerIpRanges() throws AwsServiceException, SdkClientException, Route53Exception {
return getCheckerIpRanges(GetCheckerIpRangesRequest.builder().build());
}
/**
*
* Returns information about DNSSEC for a specific hosted zone, including the key-signing keys (KSKs) in the hosted
* zone.
*
*
* @param getDnssecRequest
* @return Result of the GetDNSSEC operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidArgumentException
* Parameter name is not valid.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetDNSSEC
* @see AWS API
* Documentation
*/
default GetDnssecResponse getDNSSEC(GetDnssecRequest getDnssecRequest) throws NoSuchHostedZoneException,
InvalidArgumentException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Returns information about DNSSEC for a specific hosted zone, including the key-signing keys (KSKs) in the hosted
* zone.
*
*
*
* This is a convenience which creates an instance of the {@link GetDnssecRequest.Builder} avoiding the need to
* create one manually via {@link GetDnssecRequest#builder()}
*
*
* @param getDnssecRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetDnssecRequest.Builder} to create a request.
* @return Result of the GetDNSSEC operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidArgumentException
* Parameter name is not valid.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetDNSSEC
* @see AWS API
* Documentation
*/
default GetDnssecResponse getDNSSEC(Consumer getDnssecRequest) throws NoSuchHostedZoneException,
InvalidArgumentException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return getDNSSEC(GetDnssecRequest.builder().applyMutation(getDnssecRequest).build());
}
/**
*
* Gets information about whether a specified geographic location is supported for Amazon Route 53 geolocation
* resource record sets.
*
*
* Route 53 does not perform authorization for this API because it retrieves information that is already available
* to the public.
*
*
* Use the following syntax to determine whether a continent is supported for geolocation:
*
*
* GET /2013-04-01/geolocation?continentcode=two-letter abbreviation for a continent
*
*
* Use the following syntax to determine whether a country is supported for geolocation:
*
*
* GET /2013-04-01/geolocation?countrycode=two-character country code
*
*
* Use the following syntax to determine whether a subdivision of a country is supported for geolocation:
*
*
* GET /2013-04-01/geolocation?countrycode=two-character country code&subdivisioncode=subdivision code
*
*
* @param getGeoLocationRequest
* A request for information about whether a specified geographic location is supported for Amazon Route 53
* geolocation resource record sets.
* @return Result of the GetGeoLocation operation returned by the service.
* @throws NoSuchGeoLocationException
* Amazon Route 53 doesn't support the specified geographic location. For a list of supported geolocation
* codes, see the GeoLocation data
* type.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetGeoLocation
* @see AWS API
* Documentation
*/
default GetGeoLocationResponse getGeoLocation(GetGeoLocationRequest getGeoLocationRequest) throws NoSuchGeoLocationException,
InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets information about whether a specified geographic location is supported for Amazon Route 53 geolocation
* resource record sets.
*
*
* Route 53 does not perform authorization for this API because it retrieves information that is already available
* to the public.
*
*
* Use the following syntax to determine whether a continent is supported for geolocation:
*
*
* GET /2013-04-01/geolocation?continentcode=two-letter abbreviation for a continent
*
*
* Use the following syntax to determine whether a country is supported for geolocation:
*
*
* GET /2013-04-01/geolocation?countrycode=two-character country code
*
*
* Use the following syntax to determine whether a subdivision of a country is supported for geolocation:
*
*
* GET /2013-04-01/geolocation?countrycode=two-character country code&subdivisioncode=subdivision code
*
*
*
* This is a convenience which creates an instance of the {@link GetGeoLocationRequest.Builder} avoiding the need to
* create one manually via {@link GetGeoLocationRequest#builder()}
*
*
* @param getGeoLocationRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetGeoLocationRequest.Builder} to create a request. A
* request for information about whether a specified geographic location is supported for Amazon Route 53
* geolocation resource record sets.
* @return Result of the GetGeoLocation operation returned by the service.
* @throws NoSuchGeoLocationException
* Amazon Route 53 doesn't support the specified geographic location. For a list of supported geolocation
* codes, see the GeoLocation data
* type.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetGeoLocation
* @see AWS API
* Documentation
*/
default GetGeoLocationResponse getGeoLocation(Consumer getGeoLocationRequest)
throws NoSuchGeoLocationException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return getGeoLocation(GetGeoLocationRequest.builder().applyMutation(getGeoLocationRequest).build());
}
/**
*
* Gets information about whether a specified geographic location is supported for Amazon Route 53 geolocation
* resource record sets.
*
*
* Route 53 does not perform authorization for this API because it retrieves information that is already available
* to the public.
*
*
* Use the following syntax to determine whether a continent is supported for geolocation:
*
*
* GET /2013-04-01/geolocation?continentcode=two-letter abbreviation for a continent
*
*
* Use the following syntax to determine whether a country is supported for geolocation:
*
*
* GET /2013-04-01/geolocation?countrycode=two-character country code
*
*
* Use the following syntax to determine whether a subdivision of a country is supported for geolocation:
*
*
* GET /2013-04-01/geolocation?countrycode=two-character country code&subdivisioncode=subdivision code
*
*
* @return Result of the GetGeoLocation operation returned by the service.
* @throws NoSuchGeoLocationException
* Amazon Route 53 doesn't support the specified geographic location. For a list of supported geolocation
* codes, see the GeoLocation data
* type.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetGeoLocation
* @see #getGeoLocation(GetGeoLocationRequest)
* @see AWS API
* Documentation
*/
default GetGeoLocationResponse getGeoLocation() throws NoSuchGeoLocationException, InvalidInputException,
AwsServiceException, SdkClientException, Route53Exception {
return getGeoLocation(GetGeoLocationRequest.builder().build());
}
/**
*
* Gets information about a specified health check.
*
*
* @param getHealthCheckRequest
* A request to get information about a specified health check.
* @return Result of the GetHealthCheck operation returned by the service.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws IncompatibleVersionException
* The resource you're trying to access is unsupported on this Amazon Route 53 endpoint.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHealthCheck
* @see AWS API
* Documentation
*/
default GetHealthCheckResponse getHealthCheck(GetHealthCheckRequest getHealthCheckRequest) throws NoSuchHealthCheckException,
InvalidInputException, IncompatibleVersionException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets information about a specified health check.
*
*
*
* This is a convenience which creates an instance of the {@link GetHealthCheckRequest.Builder} avoiding the need to
* create one manually via {@link GetHealthCheckRequest#builder()}
*
*
* @param getHealthCheckRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetHealthCheckRequest.Builder} to create a request. A
* request to get information about a specified health check.
* @return Result of the GetHealthCheck operation returned by the service.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws IncompatibleVersionException
* The resource you're trying to access is unsupported on this Amazon Route 53 endpoint.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHealthCheck
* @see AWS API
* Documentation
*/
default GetHealthCheckResponse getHealthCheck(Consumer getHealthCheckRequest)
throws NoSuchHealthCheckException, InvalidInputException, IncompatibleVersionException, AwsServiceException,
SdkClientException, Route53Exception {
return getHealthCheck(GetHealthCheckRequest.builder().applyMutation(getHealthCheckRequest).build());
}
/**
*
* Retrieves the number of health checks that are associated with the current Amazon Web Services account.
*
*
* @param getHealthCheckCountRequest
* A request for the number of health checks that are associated with the current Amazon Web Services
* account.
* @return Result of the GetHealthCheckCount operation returned by the service.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHealthCheckCount
* @see AWS
* API Documentation
*/
default GetHealthCheckCountResponse getHealthCheckCount(GetHealthCheckCountRequest getHealthCheckCountRequest)
throws AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Retrieves the number of health checks that are associated with the current Amazon Web Services account.
*
*
*
* This is a convenience which creates an instance of the {@link GetHealthCheckCountRequest.Builder} avoiding the
* need to create one manually via {@link GetHealthCheckCountRequest#builder()}
*
*
* @param getHealthCheckCountRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetHealthCheckCountRequest.Builder} to create a
* request. A request for the number of health checks that are associated with the current Amazon Web
* Services account.
* @return Result of the GetHealthCheckCount operation returned by the service.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHealthCheckCount
* @see AWS
* API Documentation
*/
default GetHealthCheckCountResponse getHealthCheckCount(
Consumer getHealthCheckCountRequest) throws AwsServiceException,
SdkClientException, Route53Exception {
return getHealthCheckCount(GetHealthCheckCountRequest.builder().applyMutation(getHealthCheckCountRequest).build());
}
/**
*
* Retrieves the number of health checks that are associated with the current Amazon Web Services account.
*
*
* @return Result of the GetHealthCheckCount operation returned by the service.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHealthCheckCount
* @see #getHealthCheckCount(GetHealthCheckCountRequest)
* @see AWS
* API Documentation
*/
default GetHealthCheckCountResponse getHealthCheckCount() throws AwsServiceException, SdkClientException, Route53Exception {
return getHealthCheckCount(GetHealthCheckCountRequest.builder().build());
}
/**
*
* Gets the reason that a specified health check failed most recently.
*
*
* @param getHealthCheckLastFailureReasonRequest
* A request for the reason that a health check failed most recently.
* @return Result of the GetHealthCheckLastFailureReason operation returned by the service.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHealthCheckLastFailureReason
* @see AWS API Documentation
*/
default GetHealthCheckLastFailureReasonResponse getHealthCheckLastFailureReason(
GetHealthCheckLastFailureReasonRequest getHealthCheckLastFailureReasonRequest) throws NoSuchHealthCheckException,
InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets the reason that a specified health check failed most recently.
*
*
*
* This is a convenience which creates an instance of the {@link GetHealthCheckLastFailureReasonRequest.Builder}
* avoiding the need to create one manually via {@link GetHealthCheckLastFailureReasonRequest#builder()}
*
*
* @param getHealthCheckLastFailureReasonRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetHealthCheckLastFailureReasonRequest.Builder} to
* create a request. A request for the reason that a health check failed most recently.
* @return Result of the GetHealthCheckLastFailureReason operation returned by the service.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHealthCheckLastFailureReason
* @see AWS API Documentation
*/
default GetHealthCheckLastFailureReasonResponse getHealthCheckLastFailureReason(
Consumer getHealthCheckLastFailureReasonRequest)
throws NoSuchHealthCheckException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return getHealthCheckLastFailureReason(GetHealthCheckLastFailureReasonRequest.builder()
.applyMutation(getHealthCheckLastFailureReasonRequest).build());
}
/**
*
* Gets status of a specified health check.
*
*
*
* This API is intended for use during development to diagnose behavior. It doesn’t support production use-cases
* with high query rates that require immediate and actionable responses.
*
*
*
* @param getHealthCheckStatusRequest
* A request to get the status for a health check.
* @return Result of the GetHealthCheckStatus operation returned by the service.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHealthCheckStatus
* @see AWS
* API Documentation
*/
default GetHealthCheckStatusResponse getHealthCheckStatus(GetHealthCheckStatusRequest getHealthCheckStatusRequest)
throws NoSuchHealthCheckException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets status of a specified health check.
*
*
*
* This API is intended for use during development to diagnose behavior. It doesn’t support production use-cases
* with high query rates that require immediate and actionable responses.
*
*
*
* This is a convenience which creates an instance of the {@link GetHealthCheckStatusRequest.Builder} avoiding the
* need to create one manually via {@link GetHealthCheckStatusRequest#builder()}
*
*
* @param getHealthCheckStatusRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetHealthCheckStatusRequest.Builder} to create a
* request. A request to get the status for a health check.
* @return Result of the GetHealthCheckStatus operation returned by the service.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHealthCheckStatus
* @see AWS
* API Documentation
*/
default GetHealthCheckStatusResponse getHealthCheckStatus(
Consumer getHealthCheckStatusRequest) throws NoSuchHealthCheckException,
InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return getHealthCheckStatus(GetHealthCheckStatusRequest.builder().applyMutation(getHealthCheckStatusRequest).build());
}
/**
*
* Gets information about a specified hosted zone including the four name servers assigned to the hosted zone.
*
*
* @param getHostedZoneRequest
* A request to get information about a specified hosted zone.
* @return Result of the GetHostedZone operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHostedZone
* @see AWS API
* Documentation
*/
default GetHostedZoneResponse getHostedZone(GetHostedZoneRequest getHostedZoneRequest) throws NoSuchHostedZoneException,
InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets information about a specified hosted zone including the four name servers assigned to the hosted zone.
*
*
*
* This is a convenience which creates an instance of the {@link GetHostedZoneRequest.Builder} avoiding the need to
* create one manually via {@link GetHostedZoneRequest#builder()}
*
*
* @param getHostedZoneRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetHostedZoneRequest.Builder} to create a request. A
* request to get information about a specified hosted zone.
* @return Result of the GetHostedZone operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHostedZone
* @see AWS API
* Documentation
*/
default GetHostedZoneResponse getHostedZone(Consumer getHostedZoneRequest)
throws NoSuchHostedZoneException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return getHostedZone(GetHostedZoneRequest.builder().applyMutation(getHostedZoneRequest).build());
}
/**
*
* Retrieves the number of hosted zones that are associated with the current Amazon Web Services account.
*
*
* @param getHostedZoneCountRequest
* A request to retrieve a count of all the hosted zones that are associated with the current Amazon Web
* Services account.
* @return Result of the GetHostedZoneCount operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHostedZoneCount
* @see AWS
* API Documentation
*/
default GetHostedZoneCountResponse getHostedZoneCount(GetHostedZoneCountRequest getHostedZoneCountRequest)
throws InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Retrieves the number of hosted zones that are associated with the current Amazon Web Services account.
*
*
*
* This is a convenience which creates an instance of the {@link GetHostedZoneCountRequest.Builder} avoiding the
* need to create one manually via {@link GetHostedZoneCountRequest#builder()}
*
*
* @param getHostedZoneCountRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetHostedZoneCountRequest.Builder} to create a
* request. A request to retrieve a count of all the hosted zones that are associated with the current Amazon
* Web Services account.
* @return Result of the GetHostedZoneCount operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHostedZoneCount
* @see AWS
* API Documentation
*/
default GetHostedZoneCountResponse getHostedZoneCount(Consumer getHostedZoneCountRequest)
throws InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return getHostedZoneCount(GetHostedZoneCountRequest.builder().applyMutation(getHostedZoneCountRequest).build());
}
/**
*
* Retrieves the number of hosted zones that are associated with the current Amazon Web Services account.
*
*
* @return Result of the GetHostedZoneCount operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHostedZoneCount
* @see #getHostedZoneCount(GetHostedZoneCountRequest)
* @see AWS
* API Documentation
*/
default GetHostedZoneCountResponse getHostedZoneCount() throws InvalidInputException, AwsServiceException,
SdkClientException, Route53Exception {
return getHostedZoneCount(GetHostedZoneCountRequest.builder().build());
}
/**
*
* Gets the specified limit for a specified hosted zone, for example, the maximum number of records that you can
* create in the hosted zone.
*
*
* For the default limit, see Limits in the Amazon
* Route 53 Developer Guide. To request a higher limit, open a case.
*
*
* @param getHostedZoneLimitRequest
* A complex type that contains information about the request to create a hosted zone.
* @return Result of the GetHostedZoneLimit operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws HostedZoneNotPrivateException
* The specified hosted zone is a public hosted zone, not a private hosted zone.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHostedZoneLimit
* @see AWS
* API Documentation
*/
default GetHostedZoneLimitResponse getHostedZoneLimit(GetHostedZoneLimitRequest getHostedZoneLimitRequest)
throws NoSuchHostedZoneException, InvalidInputException, HostedZoneNotPrivateException, AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets the specified limit for a specified hosted zone, for example, the maximum number of records that you can
* create in the hosted zone.
*
*
* For the default limit, see Limits in the Amazon
* Route 53 Developer Guide. To request a higher limit, open a case.
*
*
*
* This is a convenience which creates an instance of the {@link GetHostedZoneLimitRequest.Builder} avoiding the
* need to create one manually via {@link GetHostedZoneLimitRequest#builder()}
*
*
* @param getHostedZoneLimitRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetHostedZoneLimitRequest.Builder} to create a
* request. A complex type that contains information about the request to create a hosted zone.
* @return Result of the GetHostedZoneLimit operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws HostedZoneNotPrivateException
* The specified hosted zone is a public hosted zone, not a private hosted zone.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetHostedZoneLimit
* @see AWS
* API Documentation
*/
default GetHostedZoneLimitResponse getHostedZoneLimit(Consumer getHostedZoneLimitRequest)
throws NoSuchHostedZoneException, InvalidInputException, HostedZoneNotPrivateException, AwsServiceException,
SdkClientException, Route53Exception {
return getHostedZoneLimit(GetHostedZoneLimitRequest.builder().applyMutation(getHostedZoneLimitRequest).build());
}
/**
*
* Gets information about a specified configuration for DNS query logging.
*
*
* For more information about DNS query logs, see CreateQueryLoggingConfig and Logging DNS Queries.
*
*
* @param getQueryLoggingConfigRequest
* @return Result of the GetQueryLoggingConfig operation returned by the service.
* @throws NoSuchQueryLoggingConfigException
* There is no DNS query logging configuration with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetQueryLoggingConfig
* @see AWS
* API Documentation
*/
default GetQueryLoggingConfigResponse getQueryLoggingConfig(GetQueryLoggingConfigRequest getQueryLoggingConfigRequest)
throws NoSuchQueryLoggingConfigException, InvalidInputException, AwsServiceException, SdkClientException,
Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets information about a specified configuration for DNS query logging.
*
*
* For more information about DNS query logs, see CreateQueryLoggingConfig and Logging DNS Queries.
*
*
*
* This is a convenience which creates an instance of the {@link GetQueryLoggingConfigRequest.Builder} avoiding the
* need to create one manually via {@link GetQueryLoggingConfigRequest#builder()}
*
*
* @param getQueryLoggingConfigRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetQueryLoggingConfigRequest.Builder} to create a
* request.
* @return Result of the GetQueryLoggingConfig operation returned by the service.
* @throws NoSuchQueryLoggingConfigException
* There is no DNS query logging configuration with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetQueryLoggingConfig
* @see AWS
* API Documentation
*/
default GetQueryLoggingConfigResponse getQueryLoggingConfig(
Consumer getQueryLoggingConfigRequest)
throws NoSuchQueryLoggingConfigException, InvalidInputException, AwsServiceException, SdkClientException,
Route53Exception {
return getQueryLoggingConfig(GetQueryLoggingConfigRequest.builder().applyMutation(getQueryLoggingConfigRequest).build());
}
/**
*
* Retrieves information about a specified reusable delegation set, including the four name servers that are
* assigned to the delegation set.
*
*
* @param getReusableDelegationSetRequest
* A request to get information about a specified reusable delegation set.
* @return Result of the GetReusableDelegationSet operation returned by the service.
* @throws NoSuchDelegationSetException
* A reusable delegation set with the specified ID does not exist.
* @throws DelegationSetNotReusableException
* A reusable delegation set with the specified ID does not exist.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetReusableDelegationSet
* @see AWS API Documentation
*/
default GetReusableDelegationSetResponse getReusableDelegationSet(
GetReusableDelegationSetRequest getReusableDelegationSetRequest) throws NoSuchDelegationSetException,
DelegationSetNotReusableException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Retrieves information about a specified reusable delegation set, including the four name servers that are
* assigned to the delegation set.
*
*
*
* This is a convenience which creates an instance of the {@link GetReusableDelegationSetRequest.Builder} avoiding
* the need to create one manually via {@link GetReusableDelegationSetRequest#builder()}
*
*
* @param getReusableDelegationSetRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetReusableDelegationSetRequest.Builder} to create a
* request. A request to get information about a specified reusable delegation set.
* @return Result of the GetReusableDelegationSet operation returned by the service.
* @throws NoSuchDelegationSetException
* A reusable delegation set with the specified ID does not exist.
* @throws DelegationSetNotReusableException
* A reusable delegation set with the specified ID does not exist.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetReusableDelegationSet
* @see AWS API Documentation
*/
default GetReusableDelegationSetResponse getReusableDelegationSet(
Consumer getReusableDelegationSetRequest)
throws NoSuchDelegationSetException, DelegationSetNotReusableException, InvalidInputException, AwsServiceException,
SdkClientException, Route53Exception {
return getReusableDelegationSet(GetReusableDelegationSetRequest.builder().applyMutation(getReusableDelegationSetRequest)
.build());
}
/**
*
* Gets the maximum number of hosted zones that you can associate with the specified reusable delegation set.
*
*
* For the default limit, see Limits in the Amazon
* Route 53 Developer Guide. To request a higher limit, open a case.
*
*
* @param getReusableDelegationSetLimitRequest
* A complex type that contains information about the request to create a hosted zone.
* @return Result of the GetReusableDelegationSetLimit operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchDelegationSetException
* A reusable delegation set with the specified ID does not exist.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetReusableDelegationSetLimit
* @see AWS API Documentation
*/
default GetReusableDelegationSetLimitResponse getReusableDelegationSetLimit(
GetReusableDelegationSetLimitRequest getReusableDelegationSetLimitRequest) throws InvalidInputException,
NoSuchDelegationSetException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets the maximum number of hosted zones that you can associate with the specified reusable delegation set.
*
*
* For the default limit, see Limits in the Amazon
* Route 53 Developer Guide. To request a higher limit, open a case.
*
*
*
* This is a convenience which creates an instance of the {@link GetReusableDelegationSetLimitRequest.Builder}
* avoiding the need to create one manually via {@link GetReusableDelegationSetLimitRequest#builder()}
*
*
* @param getReusableDelegationSetLimitRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetReusableDelegationSetLimitRequest.Builder} to
* create a request. A complex type that contains information about the request to create a hosted zone.
* @return Result of the GetReusableDelegationSetLimit operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchDelegationSetException
* A reusable delegation set with the specified ID does not exist.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetReusableDelegationSetLimit
* @see AWS API Documentation
*/
default GetReusableDelegationSetLimitResponse getReusableDelegationSetLimit(
Consumer getReusableDelegationSetLimitRequest)
throws InvalidInputException, NoSuchDelegationSetException, AwsServiceException, SdkClientException, Route53Exception {
return getReusableDelegationSetLimit(GetReusableDelegationSetLimitRequest.builder()
.applyMutation(getReusableDelegationSetLimitRequest).build());
}
/**
*
* Gets information about a specific traffic policy version.
*
*
* For information about how of deleting a traffic policy affects the response from GetTrafficPolicy,
* see DeleteTrafficPolicy
* .
*
*
* @param getTrafficPolicyRequest
* Gets information about a specific traffic policy version.
* @return Result of the GetTrafficPolicy operation returned by the service.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetTrafficPolicy
* @see AWS API
* Documentation
*/
default GetTrafficPolicyResponse getTrafficPolicy(GetTrafficPolicyRequest getTrafficPolicyRequest)
throws NoSuchTrafficPolicyException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets information about a specific traffic policy version.
*
*
* For information about how of deleting a traffic policy affects the response from GetTrafficPolicy,
* see DeleteTrafficPolicy
* .
*
*
*
* This is a convenience which creates an instance of the {@link GetTrafficPolicyRequest.Builder} avoiding the need
* to create one manually via {@link GetTrafficPolicyRequest#builder()}
*
*
* @param getTrafficPolicyRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetTrafficPolicyRequest.Builder} to create a request.
* Gets information about a specific traffic policy version.
* @return Result of the GetTrafficPolicy operation returned by the service.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetTrafficPolicy
* @see AWS API
* Documentation
*/
default GetTrafficPolicyResponse getTrafficPolicy(Consumer getTrafficPolicyRequest)
throws NoSuchTrafficPolicyException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return getTrafficPolicy(GetTrafficPolicyRequest.builder().applyMutation(getTrafficPolicyRequest).build());
}
/**
*
* Gets information about a specified traffic policy instance.
*
*
*
* Use GetTrafficPolicyInstance with the id of new traffic policy instance to confirm that
* the CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance request completed
* successfully. For more information, see the State response element.
*
*
*
* In the Route 53 console, traffic policy instances are known as policy records.
*
*
*
* @param getTrafficPolicyInstanceRequest
* Gets information about a specified traffic policy instance.
* @return Result of the GetTrafficPolicyInstance operation returned by the service.
* @throws NoSuchTrafficPolicyInstanceException
* No traffic policy instance exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetTrafficPolicyInstance
* @see AWS API Documentation
*/
default GetTrafficPolicyInstanceResponse getTrafficPolicyInstance(
GetTrafficPolicyInstanceRequest getTrafficPolicyInstanceRequest) throws NoSuchTrafficPolicyInstanceException,
InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets information about a specified traffic policy instance.
*
*
*
* Use GetTrafficPolicyInstance with the id of new traffic policy instance to confirm that
* the CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance request completed
* successfully. For more information, see the State response element.
*
*
*
* In the Route 53 console, traffic policy instances are known as policy records.
*
*
*
* This is a convenience which creates an instance of the {@link GetTrafficPolicyInstanceRequest.Builder} avoiding
* the need to create one manually via {@link GetTrafficPolicyInstanceRequest#builder()}
*
*
* @param getTrafficPolicyInstanceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetTrafficPolicyInstanceRequest.Builder} to create a
* request. Gets information about a specified traffic policy instance.
* @return Result of the GetTrafficPolicyInstance operation returned by the service.
* @throws NoSuchTrafficPolicyInstanceException
* No traffic policy instance exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetTrafficPolicyInstance
* @see AWS API Documentation
*/
default GetTrafficPolicyInstanceResponse getTrafficPolicyInstance(
Consumer getTrafficPolicyInstanceRequest)
throws NoSuchTrafficPolicyInstanceException, InvalidInputException, AwsServiceException, SdkClientException,
Route53Exception {
return getTrafficPolicyInstance(GetTrafficPolicyInstanceRequest.builder().applyMutation(getTrafficPolicyInstanceRequest)
.build());
}
/**
*
* Gets the number of traffic policy instances that are associated with the current Amazon Web Services account.
*
*
* @param getTrafficPolicyInstanceCountRequest
* Request to get the number of traffic policy instances that are associated with the current Amazon Web
* Services account.
* @return Result of the GetTrafficPolicyInstanceCount operation returned by the service.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetTrafficPolicyInstanceCount
* @see AWS API Documentation
*/
default GetTrafficPolicyInstanceCountResponse getTrafficPolicyInstanceCount(
GetTrafficPolicyInstanceCountRequest getTrafficPolicyInstanceCountRequest) throws AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets the number of traffic policy instances that are associated with the current Amazon Web Services account.
*
*
*
* This is a convenience which creates an instance of the {@link GetTrafficPolicyInstanceCountRequest.Builder}
* avoiding the need to create one manually via {@link GetTrafficPolicyInstanceCountRequest#builder()}
*
*
* @param getTrafficPolicyInstanceCountRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.GetTrafficPolicyInstanceCountRequest.Builder} to
* create a request. Request to get the number of traffic policy instances that are associated with the
* current Amazon Web Services account.
* @return Result of the GetTrafficPolicyInstanceCount operation returned by the service.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetTrafficPolicyInstanceCount
* @see AWS API Documentation
*/
default GetTrafficPolicyInstanceCountResponse getTrafficPolicyInstanceCount(
Consumer getTrafficPolicyInstanceCountRequest)
throws AwsServiceException, SdkClientException, Route53Exception {
return getTrafficPolicyInstanceCount(GetTrafficPolicyInstanceCountRequest.builder()
.applyMutation(getTrafficPolicyInstanceCountRequest).build());
}
/**
*
* Gets the number of traffic policy instances that are associated with the current Amazon Web Services account.
*
*
* @return Result of the GetTrafficPolicyInstanceCount operation returned by the service.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.GetTrafficPolicyInstanceCount
* @see #getTrafficPolicyInstanceCount(GetTrafficPolicyInstanceCountRequest)
* @see AWS API Documentation
*/
default GetTrafficPolicyInstanceCountResponse getTrafficPolicyInstanceCount() throws AwsServiceException, SdkClientException,
Route53Exception {
return getTrafficPolicyInstanceCount(GetTrafficPolicyInstanceCountRequest.builder().build());
}
/**
*
* Returns a paginated list of location objects and their CIDR blocks.
*
*
* @param listCidrBlocksRequest
* @return Result of the ListCidrBlocks operation returned by the service.
* @throws NoSuchCidrCollectionException
* The CIDR collection you specified, doesn't exist.
* @throws NoSuchCidrLocationException
* The CIDR collection location doesn't match any locations in your account.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListCidrBlocks
* @see AWS API
* Documentation
*/
default ListCidrBlocksResponse listCidrBlocks(ListCidrBlocksRequest listCidrBlocksRequest)
throws NoSuchCidrCollectionException, NoSuchCidrLocationException, InvalidInputException, AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Returns a paginated list of location objects and their CIDR blocks.
*
*
*
* This is a convenience which creates an instance of the {@link ListCidrBlocksRequest.Builder} avoiding the need to
* create one manually via {@link ListCidrBlocksRequest#builder()}
*
*
* @param listCidrBlocksRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListCidrBlocksRequest.Builder} to create a request.
* @return Result of the ListCidrBlocks operation returned by the service.
* @throws NoSuchCidrCollectionException
* The CIDR collection you specified, doesn't exist.
* @throws NoSuchCidrLocationException
* The CIDR collection location doesn't match any locations in your account.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListCidrBlocks
* @see AWS API
* Documentation
*/
default ListCidrBlocksResponse listCidrBlocks(Consumer listCidrBlocksRequest)
throws NoSuchCidrCollectionException, NoSuchCidrLocationException, InvalidInputException, AwsServiceException,
SdkClientException, Route53Exception {
return listCidrBlocks(ListCidrBlocksRequest.builder().applyMutation(listCidrBlocksRequest).build());
}
/**
*
* This is a variant of {@link #listCidrBlocks(software.amazon.awssdk.services.route53.model.ListCidrBlocksRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListCidrBlocksIterable responses = client.listCidrBlocksPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListCidrBlocksIterable responses = client.listCidrBlocksPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListCidrBlocksResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListCidrBlocksIterable responses = client.listCidrBlocksPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listCidrBlocks(software.amazon.awssdk.services.route53.model.ListCidrBlocksRequest)} operation.
*
*
* @param listCidrBlocksRequest
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws NoSuchCidrCollectionException
* The CIDR collection you specified, doesn't exist.
* @throws NoSuchCidrLocationException
* The CIDR collection location doesn't match any locations in your account.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListCidrBlocks
* @see AWS API
* Documentation
*/
default ListCidrBlocksIterable listCidrBlocksPaginator(ListCidrBlocksRequest listCidrBlocksRequest)
throws NoSuchCidrCollectionException, NoSuchCidrLocationException, InvalidInputException, AwsServiceException,
SdkClientException, Route53Exception {
return new ListCidrBlocksIterable(this, listCidrBlocksRequest);
}
/**
*
* This is a variant of {@link #listCidrBlocks(software.amazon.awssdk.services.route53.model.ListCidrBlocksRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListCidrBlocksIterable responses = client.listCidrBlocksPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListCidrBlocksIterable responses = client.listCidrBlocksPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListCidrBlocksResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListCidrBlocksIterable responses = client.listCidrBlocksPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listCidrBlocks(software.amazon.awssdk.services.route53.model.ListCidrBlocksRequest)} operation.
*
*
*
* This is a convenience which creates an instance of the {@link ListCidrBlocksRequest.Builder} avoiding the need to
* create one manually via {@link ListCidrBlocksRequest#builder()}
*
*
* @param listCidrBlocksRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListCidrBlocksRequest.Builder} to create a request.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws NoSuchCidrCollectionException
* The CIDR collection you specified, doesn't exist.
* @throws NoSuchCidrLocationException
* The CIDR collection location doesn't match any locations in your account.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListCidrBlocks
* @see AWS API
* Documentation
*/
default ListCidrBlocksIterable listCidrBlocksPaginator(Consumer listCidrBlocksRequest)
throws NoSuchCidrCollectionException, NoSuchCidrLocationException, InvalidInputException, AwsServiceException,
SdkClientException, Route53Exception {
return listCidrBlocksPaginator(ListCidrBlocksRequest.builder().applyMutation(listCidrBlocksRequest).build());
}
/**
*
* Returns a paginated list of CIDR collections in the Amazon Web Services account (metadata only).
*
*
* @param listCidrCollectionsRequest
* @return Result of the ListCidrCollections operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListCidrCollections
* @see AWS
* API Documentation
*/
default ListCidrCollectionsResponse listCidrCollections(ListCidrCollectionsRequest listCidrCollectionsRequest)
throws InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Returns a paginated list of CIDR collections in the Amazon Web Services account (metadata only).
*
*
*
* This is a convenience which creates an instance of the {@link ListCidrCollectionsRequest.Builder} avoiding the
* need to create one manually via {@link ListCidrCollectionsRequest#builder()}
*
*
* @param listCidrCollectionsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListCidrCollectionsRequest.Builder} to create a
* request.
* @return Result of the ListCidrCollections operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListCidrCollections
* @see AWS
* API Documentation
*/
default ListCidrCollectionsResponse listCidrCollections(
Consumer listCidrCollectionsRequest) throws InvalidInputException,
AwsServiceException, SdkClientException, Route53Exception {
return listCidrCollections(ListCidrCollectionsRequest.builder().applyMutation(listCidrCollectionsRequest).build());
}
/**
*
* This is a variant of
* {@link #listCidrCollections(software.amazon.awssdk.services.route53.model.ListCidrCollectionsRequest)} operation.
* The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
* handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListCidrCollectionsIterable responses = client.listCidrCollectionsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListCidrCollectionsIterable responses = client
* .listCidrCollectionsPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListCidrCollectionsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListCidrCollectionsIterable responses = client.listCidrCollectionsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listCidrCollections(software.amazon.awssdk.services.route53.model.ListCidrCollectionsRequest)}
* operation.
*
*
* @param listCidrCollectionsRequest
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListCidrCollections
* @see AWS
* API Documentation
*/
default ListCidrCollectionsIterable listCidrCollectionsPaginator(ListCidrCollectionsRequest listCidrCollectionsRequest)
throws InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return new ListCidrCollectionsIterable(this, listCidrCollectionsRequest);
}
/**
*
* This is a variant of
* {@link #listCidrCollections(software.amazon.awssdk.services.route53.model.ListCidrCollectionsRequest)} operation.
* The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
* handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListCidrCollectionsIterable responses = client.listCidrCollectionsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListCidrCollectionsIterable responses = client
* .listCidrCollectionsPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListCidrCollectionsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListCidrCollectionsIterable responses = client.listCidrCollectionsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listCidrCollections(software.amazon.awssdk.services.route53.model.ListCidrCollectionsRequest)}
* operation.
*
*
*
* This is a convenience which creates an instance of the {@link ListCidrCollectionsRequest.Builder} avoiding the
* need to create one manually via {@link ListCidrCollectionsRequest#builder()}
*
*
* @param listCidrCollectionsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListCidrCollectionsRequest.Builder} to create a
* request.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListCidrCollections
* @see AWS
* API Documentation
*/
default ListCidrCollectionsIterable listCidrCollectionsPaginator(
Consumer listCidrCollectionsRequest) throws InvalidInputException,
AwsServiceException, SdkClientException, Route53Exception {
return listCidrCollectionsPaginator(ListCidrCollectionsRequest.builder().applyMutation(listCidrCollectionsRequest)
.build());
}
/**
*
* Returns a paginated list of CIDR locations for the given collection (metadata only, does not include CIDR
* blocks).
*
*
* @param listCidrLocationsRequest
* @return Result of the ListCidrLocations operation returned by the service.
* @throws NoSuchCidrCollectionException
* The CIDR collection you specified, doesn't exist.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListCidrLocations
* @see AWS API
* Documentation
*/
default ListCidrLocationsResponse listCidrLocations(ListCidrLocationsRequest listCidrLocationsRequest)
throws NoSuchCidrCollectionException, InvalidInputException, AwsServiceException, SdkClientException,
Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Returns a paginated list of CIDR locations for the given collection (metadata only, does not include CIDR
* blocks).
*
*
*
* This is a convenience which creates an instance of the {@link ListCidrLocationsRequest.Builder} avoiding the need
* to create one manually via {@link ListCidrLocationsRequest#builder()}
*
*
* @param listCidrLocationsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListCidrLocationsRequest.Builder} to create a
* request.
* @return Result of the ListCidrLocations operation returned by the service.
* @throws NoSuchCidrCollectionException
* The CIDR collection you specified, doesn't exist.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListCidrLocations
* @see AWS API
* Documentation
*/
default ListCidrLocationsResponse listCidrLocations(Consumer listCidrLocationsRequest)
throws NoSuchCidrCollectionException, InvalidInputException, AwsServiceException, SdkClientException,
Route53Exception {
return listCidrLocations(ListCidrLocationsRequest.builder().applyMutation(listCidrLocationsRequest).build());
}
/**
*
* This is a variant of
* {@link #listCidrLocations(software.amazon.awssdk.services.route53.model.ListCidrLocationsRequest)} operation. The
* return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
* making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListCidrLocationsIterable responses = client.listCidrLocationsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListCidrLocationsIterable responses = client
* .listCidrLocationsPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListCidrLocationsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListCidrLocationsIterable responses = client.listCidrLocationsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listCidrLocations(software.amazon.awssdk.services.route53.model.ListCidrLocationsRequest)} operation.
*
*
* @param listCidrLocationsRequest
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws NoSuchCidrCollectionException
* The CIDR collection you specified, doesn't exist.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListCidrLocations
* @see AWS API
* Documentation
*/
default ListCidrLocationsIterable listCidrLocationsPaginator(ListCidrLocationsRequest listCidrLocationsRequest)
throws NoSuchCidrCollectionException, InvalidInputException, AwsServiceException, SdkClientException,
Route53Exception {
return new ListCidrLocationsIterable(this, listCidrLocationsRequest);
}
/**
*
* This is a variant of
* {@link #listCidrLocations(software.amazon.awssdk.services.route53.model.ListCidrLocationsRequest)} operation. The
* return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
* making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListCidrLocationsIterable responses = client.listCidrLocationsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListCidrLocationsIterable responses = client
* .listCidrLocationsPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListCidrLocationsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListCidrLocationsIterable responses = client.listCidrLocationsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listCidrLocations(software.amazon.awssdk.services.route53.model.ListCidrLocationsRequest)} operation.
*
*
*
* This is a convenience which creates an instance of the {@link ListCidrLocationsRequest.Builder} avoiding the need
* to create one manually via {@link ListCidrLocationsRequest#builder()}
*
*
* @param listCidrLocationsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListCidrLocationsRequest.Builder} to create a
* request.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws NoSuchCidrCollectionException
* The CIDR collection you specified, doesn't exist.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListCidrLocations
* @see AWS API
* Documentation
*/
default ListCidrLocationsIterable listCidrLocationsPaginator(
Consumer listCidrLocationsRequest) throws NoSuchCidrCollectionException,
InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return listCidrLocationsPaginator(ListCidrLocationsRequest.builder().applyMutation(listCidrLocationsRequest).build());
}
/**
*
* Retrieves a list of supported geographic locations.
*
*
* Countries are listed first, and continents are listed last. If Amazon Route 53 supports subdivisions for a
* country (for example, states or provinces), the subdivisions for that country are listed in alphabetical order
* immediately after the corresponding country.
*
*
* Route 53 does not perform authorization for this API because it retrieves information that is already available
* to the public.
*
*
* For a list of supported geolocation codes, see the GeoLocation data type.
*
*
* @param listGeoLocationsRequest
* A request to get a list of geographic locations that Amazon Route 53 supports for geolocation resource
* record sets.
* @return Result of the ListGeoLocations operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListGeoLocations
* @see AWS API
* Documentation
*/
default ListGeoLocationsResponse listGeoLocations(ListGeoLocationsRequest listGeoLocationsRequest)
throws InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Retrieves a list of supported geographic locations.
*
*
* Countries are listed first, and continents are listed last. If Amazon Route 53 supports subdivisions for a
* country (for example, states or provinces), the subdivisions for that country are listed in alphabetical order
* immediately after the corresponding country.
*
*
* Route 53 does not perform authorization for this API because it retrieves information that is already available
* to the public.
*
*
* For a list of supported geolocation codes, see the GeoLocation data type.
*
*
*
* This is a convenience which creates an instance of the {@link ListGeoLocationsRequest.Builder} avoiding the need
* to create one manually via {@link ListGeoLocationsRequest#builder()}
*
*
* @param listGeoLocationsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListGeoLocationsRequest.Builder} to create a request.
* A request to get a list of geographic locations that Amazon Route 53 supports for geolocation resource
* record sets.
* @return Result of the ListGeoLocations operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListGeoLocations
* @see AWS API
* Documentation
*/
default ListGeoLocationsResponse listGeoLocations(Consumer listGeoLocationsRequest)
throws InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return listGeoLocations(ListGeoLocationsRequest.builder().applyMutation(listGeoLocationsRequest).build());
}
/**
*
* Retrieves a list of supported geographic locations.
*
*
* Countries are listed first, and continents are listed last. If Amazon Route 53 supports subdivisions for a
* country (for example, states or provinces), the subdivisions for that country are listed in alphabetical order
* immediately after the corresponding country.
*
*
* Route 53 does not perform authorization for this API because it retrieves information that is already available
* to the public.
*
*
* For a list of supported geolocation codes, see the GeoLocation data type.
*
*
* @return Result of the ListGeoLocations operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListGeoLocations
* @see #listGeoLocations(ListGeoLocationsRequest)
* @see AWS API
* Documentation
*/
default ListGeoLocationsResponse listGeoLocations() throws InvalidInputException, AwsServiceException, SdkClientException,
Route53Exception {
return listGeoLocations(ListGeoLocationsRequest.builder().build());
}
/**
*
* Retrieve a list of the health checks that are associated with the current Amazon Web Services account.
*
*
* @param listHealthChecksRequest
* A request to retrieve a list of the health checks that are associated with the current Amazon Web Services
* account.
* @return Result of the ListHealthChecks operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws IncompatibleVersionException
* The resource you're trying to access is unsupported on this Amazon Route 53 endpoint.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHealthChecks
* @see AWS API
* Documentation
*/
default ListHealthChecksResponse listHealthChecks(ListHealthChecksRequest listHealthChecksRequest)
throws InvalidInputException, IncompatibleVersionException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Retrieve a list of the health checks that are associated with the current Amazon Web Services account.
*
*
*
* This is a convenience which creates an instance of the {@link ListHealthChecksRequest.Builder} avoiding the need
* to create one manually via {@link ListHealthChecksRequest#builder()}
*
*
* @param listHealthChecksRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListHealthChecksRequest.Builder} to create a request.
* A request to retrieve a list of the health checks that are associated with the current Amazon Web Services
* account.
* @return Result of the ListHealthChecks operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws IncompatibleVersionException
* The resource you're trying to access is unsupported on this Amazon Route 53 endpoint.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHealthChecks
* @see AWS API
* Documentation
*/
default ListHealthChecksResponse listHealthChecks(Consumer listHealthChecksRequest)
throws InvalidInputException, IncompatibleVersionException, AwsServiceException, SdkClientException, Route53Exception {
return listHealthChecks(ListHealthChecksRequest.builder().applyMutation(listHealthChecksRequest).build());
}
/**
*
* Retrieve a list of the health checks that are associated with the current Amazon Web Services account.
*
*
* @return Result of the ListHealthChecks operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws IncompatibleVersionException
* The resource you're trying to access is unsupported on this Amazon Route 53 endpoint.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHealthChecks
* @see #listHealthChecks(ListHealthChecksRequest)
* @see AWS API
* Documentation
*/
default ListHealthChecksResponse listHealthChecks() throws InvalidInputException, IncompatibleVersionException,
AwsServiceException, SdkClientException, Route53Exception {
return listHealthChecks(ListHealthChecksRequest.builder().build());
}
/**
*
* This is a variant of
* {@link #listHealthChecks(software.amazon.awssdk.services.route53.model.ListHealthChecksRequest)} operation. The
* return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
* making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListHealthChecksIterable responses = client.listHealthChecksPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListHealthChecksIterable responses = client
* .listHealthChecksPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListHealthChecksResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListHealthChecksIterable responses = client.listHealthChecksPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxItems won't limit the number of results you get with the paginator.
* It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listHealthChecks(software.amazon.awssdk.services.route53.model.ListHealthChecksRequest)} operation.
*
*
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws InvalidInputException
* The input is not valid.
* @throws IncompatibleVersionException
* The resource you're trying to access is unsupported on this Amazon Route 53 endpoint.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHealthChecks
* @see #listHealthChecksPaginator(ListHealthChecksRequest)
* @see AWS API
* Documentation
*/
default ListHealthChecksIterable listHealthChecksPaginator() throws InvalidInputException, IncompatibleVersionException,
AwsServiceException, SdkClientException, Route53Exception {
return listHealthChecksPaginator(ListHealthChecksRequest.builder().build());
}
/**
*
* This is a variant of
* {@link #listHealthChecks(software.amazon.awssdk.services.route53.model.ListHealthChecksRequest)} operation. The
* return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
* making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListHealthChecksIterable responses = client.listHealthChecksPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListHealthChecksIterable responses = client
* .listHealthChecksPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListHealthChecksResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListHealthChecksIterable responses = client.listHealthChecksPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxItems won't limit the number of results you get with the paginator.
* It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listHealthChecks(software.amazon.awssdk.services.route53.model.ListHealthChecksRequest)} operation.
*
*
* @param listHealthChecksRequest
* A request to retrieve a list of the health checks that are associated with the current Amazon Web Services
* account.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws InvalidInputException
* The input is not valid.
* @throws IncompatibleVersionException
* The resource you're trying to access is unsupported on this Amazon Route 53 endpoint.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHealthChecks
* @see AWS API
* Documentation
*/
default ListHealthChecksIterable listHealthChecksPaginator(ListHealthChecksRequest listHealthChecksRequest)
throws InvalidInputException, IncompatibleVersionException, AwsServiceException, SdkClientException, Route53Exception {
return new ListHealthChecksIterable(this, listHealthChecksRequest);
}
/**
*
* This is a variant of
* {@link #listHealthChecks(software.amazon.awssdk.services.route53.model.ListHealthChecksRequest)} operation. The
* return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
* making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListHealthChecksIterable responses = client.listHealthChecksPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListHealthChecksIterable responses = client
* .listHealthChecksPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListHealthChecksResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListHealthChecksIterable responses = client.listHealthChecksPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxItems won't limit the number of results you get with the paginator.
* It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listHealthChecks(software.amazon.awssdk.services.route53.model.ListHealthChecksRequest)} operation.
*
*
*
* This is a convenience which creates an instance of the {@link ListHealthChecksRequest.Builder} avoiding the need
* to create one manually via {@link ListHealthChecksRequest#builder()}
*
*
* @param listHealthChecksRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListHealthChecksRequest.Builder} to create a request.
* A request to retrieve a list of the health checks that are associated with the current Amazon Web Services
* account.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws InvalidInputException
* The input is not valid.
* @throws IncompatibleVersionException
* The resource you're trying to access is unsupported on this Amazon Route 53 endpoint.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHealthChecks
* @see AWS API
* Documentation
*/
default ListHealthChecksIterable listHealthChecksPaginator(Consumer listHealthChecksRequest)
throws InvalidInputException, IncompatibleVersionException, AwsServiceException, SdkClientException, Route53Exception {
return listHealthChecksPaginator(ListHealthChecksRequest.builder().applyMutation(listHealthChecksRequest).build());
}
/**
*
* Retrieves a list of the public and private hosted zones that are associated with the current Amazon Web Services
* account. The response includes a HostedZones child element for each hosted zone.
*
*
* Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of hosted zones, you can use
* the maxitems parameter to list them in groups of up to 100.
*
*
* @param listHostedZonesRequest
* A request to retrieve a list of the public and private hosted zones that are associated with the current
* Amazon Web Services account.
* @return Result of the ListHostedZones operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchDelegationSetException
* A reusable delegation set with the specified ID does not exist.
* @throws DelegationSetNotReusableException
* A reusable delegation set with the specified ID does not exist.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHostedZones
* @see AWS API
* Documentation
*/
default ListHostedZonesResponse listHostedZones(ListHostedZonesRequest listHostedZonesRequest) throws InvalidInputException,
NoSuchDelegationSetException, DelegationSetNotReusableException, AwsServiceException, SdkClientException,
Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Retrieves a list of the public and private hosted zones that are associated with the current Amazon Web Services
* account. The response includes a HostedZones child element for each hosted zone.
*
*
* Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of hosted zones, you can use
* the maxitems parameter to list them in groups of up to 100.
*
*
*
* This is a convenience which creates an instance of the {@link ListHostedZonesRequest.Builder} avoiding the need
* to create one manually via {@link ListHostedZonesRequest#builder()}
*
*
* @param listHostedZonesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListHostedZonesRequest.Builder} to create a request.
* A request to retrieve a list of the public and private hosted zones that are associated with the current
* Amazon Web Services account.
* @return Result of the ListHostedZones operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchDelegationSetException
* A reusable delegation set with the specified ID does not exist.
* @throws DelegationSetNotReusableException
* A reusable delegation set with the specified ID does not exist.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHostedZones
* @see AWS API
* Documentation
*/
default ListHostedZonesResponse listHostedZones(Consumer listHostedZonesRequest)
throws InvalidInputException, NoSuchDelegationSetException, DelegationSetNotReusableException, AwsServiceException,
SdkClientException, Route53Exception {
return listHostedZones(ListHostedZonesRequest.builder().applyMutation(listHostedZonesRequest).build());
}
/**
*
* Retrieves a list of the public and private hosted zones that are associated with the current Amazon Web Services
* account. The response includes a HostedZones child element for each hosted zone.
*
*
* Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of hosted zones, you can use
* the maxitems parameter to list them in groups of up to 100.
*
*
* @return Result of the ListHostedZones operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchDelegationSetException
* A reusable delegation set with the specified ID does not exist.
* @throws DelegationSetNotReusableException
* A reusable delegation set with the specified ID does not exist.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHostedZones
* @see #listHostedZones(ListHostedZonesRequest)
* @see AWS API
* Documentation
*/
default ListHostedZonesResponse listHostedZones() throws InvalidInputException, NoSuchDelegationSetException,
DelegationSetNotReusableException, AwsServiceException, SdkClientException, Route53Exception {
return listHostedZones(ListHostedZonesRequest.builder().build());
}
/**
*
* This is a variant of
* {@link #listHostedZones(software.amazon.awssdk.services.route53.model.ListHostedZonesRequest)} operation. The
* return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
* making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListHostedZonesIterable responses = client.listHostedZonesPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListHostedZonesIterable responses = client
* .listHostedZonesPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListHostedZonesResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListHostedZonesIterable responses = client.listHostedZonesPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxItems won't limit the number of results you get with the paginator.
* It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listHostedZones(software.amazon.awssdk.services.route53.model.ListHostedZonesRequest)} operation.
*
*
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchDelegationSetException
* A reusable delegation set with the specified ID does not exist.
* @throws DelegationSetNotReusableException
* A reusable delegation set with the specified ID does not exist.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHostedZones
* @see #listHostedZonesPaginator(ListHostedZonesRequest)
* @see AWS API
* Documentation
*/
default ListHostedZonesIterable listHostedZonesPaginator() throws InvalidInputException, NoSuchDelegationSetException,
DelegationSetNotReusableException, AwsServiceException, SdkClientException, Route53Exception {
return listHostedZonesPaginator(ListHostedZonesRequest.builder().build());
}
/**
*
* This is a variant of
* {@link #listHostedZones(software.amazon.awssdk.services.route53.model.ListHostedZonesRequest)} operation. The
* return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
* making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListHostedZonesIterable responses = client.listHostedZonesPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListHostedZonesIterable responses = client
* .listHostedZonesPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListHostedZonesResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListHostedZonesIterable responses = client.listHostedZonesPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxItems won't limit the number of results you get with the paginator.
* It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listHostedZones(software.amazon.awssdk.services.route53.model.ListHostedZonesRequest)} operation.
*
*
* @param listHostedZonesRequest
* A request to retrieve a list of the public and private hosted zones that are associated with the current
* Amazon Web Services account.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchDelegationSetException
* A reusable delegation set with the specified ID does not exist.
* @throws DelegationSetNotReusableException
* A reusable delegation set with the specified ID does not exist.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHostedZones
* @see AWS API
* Documentation
*/
default ListHostedZonesIterable listHostedZonesPaginator(ListHostedZonesRequest listHostedZonesRequest)
throws InvalidInputException, NoSuchDelegationSetException, DelegationSetNotReusableException, AwsServiceException,
SdkClientException, Route53Exception {
return new ListHostedZonesIterable(this, listHostedZonesRequest);
}
/**
*
* This is a variant of
* {@link #listHostedZones(software.amazon.awssdk.services.route53.model.ListHostedZonesRequest)} operation. The
* return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
* making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListHostedZonesIterable responses = client.listHostedZonesPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListHostedZonesIterable responses = client
* .listHostedZonesPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListHostedZonesResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListHostedZonesIterable responses = client.listHostedZonesPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxItems won't limit the number of results you get with the paginator.
* It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listHostedZones(software.amazon.awssdk.services.route53.model.ListHostedZonesRequest)} operation.
*
*
*
* This is a convenience which creates an instance of the {@link ListHostedZonesRequest.Builder} avoiding the need
* to create one manually via {@link ListHostedZonesRequest#builder()}
*
*
* @param listHostedZonesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListHostedZonesRequest.Builder} to create a request.
* A request to retrieve a list of the public and private hosted zones that are associated with the current
* Amazon Web Services account.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchDelegationSetException
* A reusable delegation set with the specified ID does not exist.
* @throws DelegationSetNotReusableException
* A reusable delegation set with the specified ID does not exist.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHostedZones
* @see AWS API
* Documentation
*/
default ListHostedZonesIterable listHostedZonesPaginator(Consumer listHostedZonesRequest)
throws InvalidInputException, NoSuchDelegationSetException, DelegationSetNotReusableException, AwsServiceException,
SdkClientException, Route53Exception {
return listHostedZonesPaginator(ListHostedZonesRequest.builder().applyMutation(listHostedZonesRequest).build());
}
/**
*
* Retrieves a list of your hosted zones in lexicographic order. The response includes a HostedZones
* child element for each hosted zone created by the current Amazon Web Services account.
*
*
* ListHostedZonesByName sorts hosted zones by name with the labels reversed. For example:
*
*
* com.example.www.
*
*
* Note the trailing dot, which can change the sort order in some circumstances.
*
*
* If the domain name includes escape characters or Punycode, ListHostedZonesByName alphabetizes the
* domain name using the escaped or Punycoded value, which is the format that Amazon Route 53 saves in its database.
* For example, to create a hosted zone for exämple.com, you specify ex\344mple.com for the domain name.
* ListHostedZonesByName alphabetizes it as:
*
*
* com.ex\344mple.
*
*
* The labels are reversed and alphabetized using the escaped value. For more information about valid domain name
* formats, including internationalized domain names, see DNS Domain Name Format
* in the Amazon Route 53 Developer Guide.
*
*
* Route 53 returns up to 100 items in each response. If you have a lot of hosted zones, use the
* MaxItems parameter to list them in groups of up to 100. The response includes values that help
* navigate from one group of MaxItems hosted zones to the next:
*
*
* -
*
* The DNSName and HostedZoneId elements in the response contain the values, if any,
* specified for the dnsname and hostedzoneid parameters in the request that produced the
* current response.
*
*
* -
*
* The MaxItems element in the response contains the value, if any, that you specified for the
* maxitems parameter in the request that produced the current response.
*
*
* -
*
* If the value of IsTruncated in the response is true, there are more hosted zones associated with the
* current Amazon Web Services account.
*
*
* If IsTruncated is false, this response includes the last hosted zone that is associated with the
* current account. The NextDNSName element and NextHostedZoneId elements are omitted from
* the response.
*
*
* -
*
* The NextDNSName and NextHostedZoneId elements in the response contain the domain name
* and the hosted zone ID of the next hosted zone that is associated with the current Amazon Web Services account.
* If you want to list more hosted zones, make another call to ListHostedZonesByName, and specify the
* value of NextDNSName and NextHostedZoneId in the dnsname and
* hostedzoneid parameters, respectively.
*
*
*
*
* @param listHostedZonesByNameRequest
* Retrieves a list of the public and private hosted zones that are associated with the current Amazon Web
* Services account in ASCII order by domain name.
* @return Result of the ListHostedZonesByName operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidDomainNameException
* The specified domain name is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHostedZonesByName
* @see AWS
* API Documentation
*/
default ListHostedZonesByNameResponse listHostedZonesByName(ListHostedZonesByNameRequest listHostedZonesByNameRequest)
throws InvalidInputException, InvalidDomainNameException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Retrieves a list of your hosted zones in lexicographic order. The response includes a HostedZones
* child element for each hosted zone created by the current Amazon Web Services account.
*
*
* ListHostedZonesByName sorts hosted zones by name with the labels reversed. For example:
*
*
* com.example.www.
*
*
* Note the trailing dot, which can change the sort order in some circumstances.
*
*
* If the domain name includes escape characters or Punycode, ListHostedZonesByName alphabetizes the
* domain name using the escaped or Punycoded value, which is the format that Amazon Route 53 saves in its database.
* For example, to create a hosted zone for exämple.com, you specify ex\344mple.com for the domain name.
* ListHostedZonesByName alphabetizes it as:
*
*
* com.ex\344mple.
*
*
* The labels are reversed and alphabetized using the escaped value. For more information about valid domain name
* formats, including internationalized domain names, see DNS Domain Name Format
* in the Amazon Route 53 Developer Guide.
*
*
* Route 53 returns up to 100 items in each response. If you have a lot of hosted zones, use the
* MaxItems parameter to list them in groups of up to 100. The response includes values that help
* navigate from one group of MaxItems hosted zones to the next:
*
*
* -
*
* The DNSName and HostedZoneId elements in the response contain the values, if any,
* specified for the dnsname and hostedzoneid parameters in the request that produced the
* current response.
*
*
* -
*
* The MaxItems element in the response contains the value, if any, that you specified for the
* maxitems parameter in the request that produced the current response.
*
*
* -
*
* If the value of IsTruncated in the response is true, there are more hosted zones associated with the
* current Amazon Web Services account.
*
*
* If IsTruncated is false, this response includes the last hosted zone that is associated with the
* current account. The NextDNSName element and NextHostedZoneId elements are omitted from
* the response.
*
*
* -
*
* The NextDNSName and NextHostedZoneId elements in the response contain the domain name
* and the hosted zone ID of the next hosted zone that is associated with the current Amazon Web Services account.
* If you want to list more hosted zones, make another call to ListHostedZonesByName, and specify the
* value of NextDNSName and NextHostedZoneId in the dnsname and
* hostedzoneid parameters, respectively.
*
*
*
*
*
* This is a convenience which creates an instance of the {@link ListHostedZonesByNameRequest.Builder} avoiding the
* need to create one manually via {@link ListHostedZonesByNameRequest#builder()}
*
*
* @param listHostedZonesByNameRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListHostedZonesByNameRequest.Builder} to create a
* request. Retrieves a list of the public and private hosted zones that are associated with the current
* Amazon Web Services account in ASCII order by domain name.
* @return Result of the ListHostedZonesByName operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidDomainNameException
* The specified domain name is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHostedZonesByName
* @see AWS
* API Documentation
*/
default ListHostedZonesByNameResponse listHostedZonesByName(
Consumer listHostedZonesByNameRequest) throws InvalidInputException,
InvalidDomainNameException, AwsServiceException, SdkClientException, Route53Exception {
return listHostedZonesByName(ListHostedZonesByNameRequest.builder().applyMutation(listHostedZonesByNameRequest).build());
}
/**
*
* Retrieves a list of your hosted zones in lexicographic order. The response includes a HostedZones
* child element for each hosted zone created by the current Amazon Web Services account.
*
*
* ListHostedZonesByName sorts hosted zones by name with the labels reversed. For example:
*
*
* com.example.www.
*
*
* Note the trailing dot, which can change the sort order in some circumstances.
*
*
* If the domain name includes escape characters or Punycode, ListHostedZonesByName alphabetizes the
* domain name using the escaped or Punycoded value, which is the format that Amazon Route 53 saves in its database.
* For example, to create a hosted zone for exämple.com, you specify ex\344mple.com for the domain name.
* ListHostedZonesByName alphabetizes it as:
*
*
* com.ex\344mple.
*
*
* The labels are reversed and alphabetized using the escaped value. For more information about valid domain name
* formats, including internationalized domain names, see DNS Domain Name Format
* in the Amazon Route 53 Developer Guide.
*
*
* Route 53 returns up to 100 items in each response. If you have a lot of hosted zones, use the
* MaxItems parameter to list them in groups of up to 100. The response includes values that help
* navigate from one group of MaxItems hosted zones to the next:
*
*
* -
*
* The DNSName and HostedZoneId elements in the response contain the values, if any,
* specified for the dnsname and hostedzoneid parameters in the request that produced the
* current response.
*
*
* -
*
* The MaxItems element in the response contains the value, if any, that you specified for the
* maxitems parameter in the request that produced the current response.
*
*
* -
*
* If the value of IsTruncated in the response is true, there are more hosted zones associated with the
* current Amazon Web Services account.
*
*
* If IsTruncated is false, this response includes the last hosted zone that is associated with the
* current account. The NextDNSName element and NextHostedZoneId elements are omitted from
* the response.
*
*
* -
*
* The NextDNSName and NextHostedZoneId elements in the response contain the domain name
* and the hosted zone ID of the next hosted zone that is associated with the current Amazon Web Services account.
* If you want to list more hosted zones, make another call to ListHostedZonesByName, and specify the
* value of NextDNSName and NextHostedZoneId in the dnsname and
* hostedzoneid parameters, respectively.
*
*
*
*
* @return Result of the ListHostedZonesByName operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidDomainNameException
* The specified domain name is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHostedZonesByName
* @see #listHostedZonesByName(ListHostedZonesByNameRequest)
* @see AWS
* API Documentation
*/
default ListHostedZonesByNameResponse listHostedZonesByName() throws InvalidInputException, InvalidDomainNameException,
AwsServiceException, SdkClientException, Route53Exception {
return listHostedZonesByName(ListHostedZonesByNameRequest.builder().build());
}
/**
*
* Lists all the private hosted zones that a specified VPC is associated with, regardless of which Amazon Web
* Services account or Amazon Web Services service owns the hosted zones. The HostedZoneOwner structure
* in the response contains one of the following values:
*
*
* -
*
* An OwningAccount element, which contains the account number of either the current Amazon Web
* Services account or another Amazon Web Services account. Some services, such as Cloud Map, create hosted zones
* using the current account.
*
*
* -
*
* An OwningService element, which identifies the Amazon Web Services service that created and owns the
* hosted zone. For example, if a hosted zone was created by Amazon Elastic File System (Amazon EFS), the value of
* Owner is efs.amazonaws.com.
*
*
*
*
*
* When listing private hosted zones, the hosted zone and the Amazon VPC must belong to the same partition where the
* hosted zones were created. A partition is a group of Amazon Web Services Regions. Each Amazon Web Services
* account is scoped to one partition.
*
*
* The following are the supported partitions:
*
*
* -
*
* aws - Amazon Web Services Regions
*
*
* -
*
* aws-cn - China Regions
*
*
* -
*
* aws-us-gov - Amazon Web Services GovCloud (US) Region
*
*
*
*
* For more information, see Access Management in the
* Amazon Web Services General Reference.
*
*
*
* @param listHostedZonesByVpcRequest
* Lists all the private hosted zones that a specified VPC is associated with, regardless of which Amazon Web
* Services account created the hosted zones.
* @return Result of the ListHostedZonesByVPC operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidPaginationTokenException
* The value that you specified to get the second or subsequent page of results is invalid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHostedZonesByVPC
* @see AWS
* API Documentation
*/
default ListHostedZonesByVpcResponse listHostedZonesByVPC(ListHostedZonesByVpcRequest listHostedZonesByVpcRequest)
throws InvalidInputException, InvalidPaginationTokenException, AwsServiceException, SdkClientException,
Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Lists all the private hosted zones that a specified VPC is associated with, regardless of which Amazon Web
* Services account or Amazon Web Services service owns the hosted zones. The HostedZoneOwner structure
* in the response contains one of the following values:
*
*
* -
*
* An OwningAccount element, which contains the account number of either the current Amazon Web
* Services account or another Amazon Web Services account. Some services, such as Cloud Map, create hosted zones
* using the current account.
*
*
* -
*
* An OwningService element, which identifies the Amazon Web Services service that created and owns the
* hosted zone. For example, if a hosted zone was created by Amazon Elastic File System (Amazon EFS), the value of
* Owner is efs.amazonaws.com.
*
*
*
*
*
* When listing private hosted zones, the hosted zone and the Amazon VPC must belong to the same partition where the
* hosted zones were created. A partition is a group of Amazon Web Services Regions. Each Amazon Web Services
* account is scoped to one partition.
*
*
* The following are the supported partitions:
*
*
* -
*
* aws - Amazon Web Services Regions
*
*
* -
*
* aws-cn - China Regions
*
*
* -
*
* aws-us-gov - Amazon Web Services GovCloud (US) Region
*
*
*
*
* For more information, see Access Management in the
* Amazon Web Services General Reference.
*
*
*
* This is a convenience which creates an instance of the {@link ListHostedZonesByVpcRequest.Builder} avoiding the
* need to create one manually via {@link ListHostedZonesByVpcRequest#builder()}
*
*
* @param listHostedZonesByVpcRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListHostedZonesByVpcRequest.Builder} to create a
* request. Lists all the private hosted zones that a specified VPC is associated with, regardless of which
* Amazon Web Services account created the hosted zones.
* @return Result of the ListHostedZonesByVPC operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidPaginationTokenException
* The value that you specified to get the second or subsequent page of results is invalid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListHostedZonesByVPC
* @see AWS
* API Documentation
*/
default ListHostedZonesByVpcResponse listHostedZonesByVPC(
Consumer listHostedZonesByVpcRequest) throws InvalidInputException,
InvalidPaginationTokenException, AwsServiceException, SdkClientException, Route53Exception {
return listHostedZonesByVPC(ListHostedZonesByVpcRequest.builder().applyMutation(listHostedZonesByVpcRequest).build());
}
/**
*
* Lists the configurations for DNS query logging that are associated with the current Amazon Web Services account
* or the configuration that is associated with a specified hosted zone.
*
*
* For more information about DNS query logs, see CreateQueryLoggingConfig. Additional information, including the format of DNS query logs, appears in Logging DNS Queries in the
* Amazon Route 53 Developer Guide.
*
*
* @param listQueryLoggingConfigsRequest
* @return Result of the ListQueryLoggingConfigs operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidPaginationTokenException
* The value that you specified to get the second or subsequent page of results is invalid.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListQueryLoggingConfigs
* @see AWS API Documentation
*/
default ListQueryLoggingConfigsResponse listQueryLoggingConfigs(ListQueryLoggingConfigsRequest listQueryLoggingConfigsRequest)
throws InvalidInputException, InvalidPaginationTokenException, NoSuchHostedZoneException, AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Lists the configurations for DNS query logging that are associated with the current Amazon Web Services account
* or the configuration that is associated with a specified hosted zone.
*
*
* For more information about DNS query logs, see CreateQueryLoggingConfig. Additional information, including the format of DNS query logs, appears in Logging DNS Queries in the
* Amazon Route 53 Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link ListQueryLoggingConfigsRequest.Builder} avoiding
* the need to create one manually via {@link ListQueryLoggingConfigsRequest#builder()}
*
*
* @param listQueryLoggingConfigsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListQueryLoggingConfigsRequest.Builder} to create a
* request.
* @return Result of the ListQueryLoggingConfigs operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidPaginationTokenException
* The value that you specified to get the second or subsequent page of results is invalid.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListQueryLoggingConfigs
* @see AWS API Documentation
*/
default ListQueryLoggingConfigsResponse listQueryLoggingConfigs(
Consumer listQueryLoggingConfigsRequest) throws InvalidInputException,
InvalidPaginationTokenException, NoSuchHostedZoneException, AwsServiceException, SdkClientException, Route53Exception {
return listQueryLoggingConfigs(ListQueryLoggingConfigsRequest.builder().applyMutation(listQueryLoggingConfigsRequest)
.build());
}
/**
*
* Lists the configurations for DNS query logging that are associated with the current Amazon Web Services account
* or the configuration that is associated with a specified hosted zone.
*
*
* For more information about DNS query logs, see CreateQueryLoggingConfig. Additional information, including the format of DNS query logs, appears in Logging DNS Queries in the
* Amazon Route 53 Developer Guide.
*
*
* @return Result of the ListQueryLoggingConfigs operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidPaginationTokenException
* The value that you specified to get the second or subsequent page of results is invalid.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListQueryLoggingConfigs
* @see #listQueryLoggingConfigs(ListQueryLoggingConfigsRequest)
* @see AWS API Documentation
*/
default ListQueryLoggingConfigsResponse listQueryLoggingConfigs() throws InvalidInputException,
InvalidPaginationTokenException, NoSuchHostedZoneException, AwsServiceException, SdkClientException, Route53Exception {
return listQueryLoggingConfigs(ListQueryLoggingConfigsRequest.builder().build());
}
/**
*
* This is a variant of
* {@link #listQueryLoggingConfigs(software.amazon.awssdk.services.route53.model.ListQueryLoggingConfigsRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListQueryLoggingConfigsIterable responses = client.listQueryLoggingConfigsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListQueryLoggingConfigsIterable responses = client
* .listQueryLoggingConfigsPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListQueryLoggingConfigsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListQueryLoggingConfigsIterable responses = client.listQueryLoggingConfigsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listQueryLoggingConfigs(software.amazon.awssdk.services.route53.model.ListQueryLoggingConfigsRequest)}
* operation.
*
*
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidPaginationTokenException
* The value that you specified to get the second or subsequent page of results is invalid.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListQueryLoggingConfigs
* @see #listQueryLoggingConfigsPaginator(ListQueryLoggingConfigsRequest)
* @see AWS API Documentation
*/
default ListQueryLoggingConfigsIterable listQueryLoggingConfigsPaginator() throws InvalidInputException,
InvalidPaginationTokenException, NoSuchHostedZoneException, AwsServiceException, SdkClientException, Route53Exception {
return listQueryLoggingConfigsPaginator(ListQueryLoggingConfigsRequest.builder().build());
}
/**
*
* This is a variant of
* {@link #listQueryLoggingConfigs(software.amazon.awssdk.services.route53.model.ListQueryLoggingConfigsRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListQueryLoggingConfigsIterable responses = client.listQueryLoggingConfigsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListQueryLoggingConfigsIterable responses = client
* .listQueryLoggingConfigsPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListQueryLoggingConfigsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListQueryLoggingConfigsIterable responses = client.listQueryLoggingConfigsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listQueryLoggingConfigs(software.amazon.awssdk.services.route53.model.ListQueryLoggingConfigsRequest)}
* operation.
*
*
* @param listQueryLoggingConfigsRequest
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidPaginationTokenException
* The value that you specified to get the second or subsequent page of results is invalid.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListQueryLoggingConfigs
* @see AWS API Documentation
*/
default ListQueryLoggingConfigsIterable listQueryLoggingConfigsPaginator(
ListQueryLoggingConfigsRequest listQueryLoggingConfigsRequest) throws InvalidInputException,
InvalidPaginationTokenException, NoSuchHostedZoneException, AwsServiceException, SdkClientException, Route53Exception {
return new ListQueryLoggingConfigsIterable(this, listQueryLoggingConfigsRequest);
}
/**
*
* This is a variant of
* {@link #listQueryLoggingConfigs(software.amazon.awssdk.services.route53.model.ListQueryLoggingConfigsRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListQueryLoggingConfigsIterable responses = client.listQueryLoggingConfigsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListQueryLoggingConfigsIterable responses = client
* .listQueryLoggingConfigsPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListQueryLoggingConfigsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListQueryLoggingConfigsIterable responses = client.listQueryLoggingConfigsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxResults won't limit the number of results you get with the
* paginator. It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listQueryLoggingConfigs(software.amazon.awssdk.services.route53.model.ListQueryLoggingConfigsRequest)}
* operation.
*
*
*
* This is a convenience which creates an instance of the {@link ListQueryLoggingConfigsRequest.Builder} avoiding
* the need to create one manually via {@link ListQueryLoggingConfigsRequest#builder()}
*
*
* @param listQueryLoggingConfigsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListQueryLoggingConfigsRequest.Builder} to create a
* request.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidPaginationTokenException
* The value that you specified to get the second or subsequent page of results is invalid.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListQueryLoggingConfigs
* @see AWS API Documentation
*/
default ListQueryLoggingConfigsIterable listQueryLoggingConfigsPaginator(
Consumer listQueryLoggingConfigsRequest) throws InvalidInputException,
InvalidPaginationTokenException, NoSuchHostedZoneException, AwsServiceException, SdkClientException, Route53Exception {
return listQueryLoggingConfigsPaginator(ListQueryLoggingConfigsRequest.builder()
.applyMutation(listQueryLoggingConfigsRequest).build());
}
/**
*
* Lists the resource record sets in a specified hosted zone.
*
*
* ListResourceRecordSets returns up to 300 resource record sets at a time in ASCII order, beginning at
* a position specified by the name and type elements.
*
*
* Sort order
*
*
* ListResourceRecordSets sorts results first by DNS name with the labels reversed, for example:
*
*
* com.example.www.
*
*
* Note the trailing dot, which can change the sort order when the record name contains characters that appear
* before . (decimal 46) in the ASCII table. These characters include the following:
* ! " # $ % & ' ( ) * + , -
*
*
* When multiple records have the same DNS name, ListResourceRecordSets sorts results by the record
* type.
*
*
* Specifying where to start listing records
*
*
* You can use the name and type elements to specify the resource record set that the list begins with:
*
*
* - If you do not specify Name or Type
* -
*
* The results begin with the first resource record set that the hosted zone contains.
*
*
* - If you specify Name but not Type
* -
*
* The results begin with the first resource record set in the list whose name is greater than or equal to
* Name.
*
*
* - If you specify Type but not Name
* -
*
* Amazon Route 53 returns the InvalidInput error.
*
*
* - If you specify both Name and Type
* -
*
* The results begin with the first resource record set in the list whose name is greater than or equal to
* Name, and whose type is greater than or equal to Type.
*
*
*
*
* Resource record sets that are PENDING
*
*
* This action returns the most current version of the records. This includes records that are PENDING,
* and that are not yet available on all Route 53 DNS servers.
*
*
* Changing resource record sets
*
*
* To ensure that you get an accurate listing of the resource record sets for a hosted zone at a point in time, do
* not submit a ChangeResourceRecordSets request while you're paging through the results of a
* ListResourceRecordSets request. If you do, some pages may display results without the latest changes
* while other pages display results with the latest changes.
*
*
* Displaying the next page of results
*
*
* If a ListResourceRecordSets command returns more than one page of results, the value of
* IsTruncated is true. To display the next page of results, get the values of
* NextRecordName, NextRecordType, and NextRecordIdentifier (if any) from the
* response. Then submit another ListResourceRecordSets request, and specify those values for
* StartRecordName, StartRecordType, and StartRecordIdentifier.
*
*
* @param listResourceRecordSetsRequest
* A request for the resource record sets that are associated with a specified hosted zone.
* @return Result of the ListResourceRecordSets operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListResourceRecordSets
* @see AWS API Documentation
*/
default ListResourceRecordSetsResponse listResourceRecordSets(ListResourceRecordSetsRequest listResourceRecordSetsRequest)
throws NoSuchHostedZoneException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Lists the resource record sets in a specified hosted zone.
*
*
* ListResourceRecordSets returns up to 300 resource record sets at a time in ASCII order, beginning at
* a position specified by the name and type elements.
*
*
* Sort order
*
*
* ListResourceRecordSets sorts results first by DNS name with the labels reversed, for example:
*
*
* com.example.www.
*
*
* Note the trailing dot, which can change the sort order when the record name contains characters that appear
* before . (decimal 46) in the ASCII table. These characters include the following:
* ! " # $ % & ' ( ) * + , -
*
*
* When multiple records have the same DNS name, ListResourceRecordSets sorts results by the record
* type.
*
*
* Specifying where to start listing records
*
*
* You can use the name and type elements to specify the resource record set that the list begins with:
*
*
* - If you do not specify Name or Type
* -
*
* The results begin with the first resource record set that the hosted zone contains.
*
*
* - If you specify Name but not Type
* -
*
* The results begin with the first resource record set in the list whose name is greater than or equal to
* Name.
*
*
* - If you specify Type but not Name
* -
*
* Amazon Route 53 returns the InvalidInput error.
*
*
* - If you specify both Name and Type
* -
*
* The results begin with the first resource record set in the list whose name is greater than or equal to
* Name, and whose type is greater than or equal to Type.
*
*
*
*
* Resource record sets that are PENDING
*
*
* This action returns the most current version of the records. This includes records that are PENDING,
* and that are not yet available on all Route 53 DNS servers.
*
*
* Changing resource record sets
*
*
* To ensure that you get an accurate listing of the resource record sets for a hosted zone at a point in time, do
* not submit a ChangeResourceRecordSets request while you're paging through the results of a
* ListResourceRecordSets request. If you do, some pages may display results without the latest changes
* while other pages display results with the latest changes.
*
*
* Displaying the next page of results
*
*
* If a ListResourceRecordSets command returns more than one page of results, the value of
* IsTruncated is true. To display the next page of results, get the values of
* NextRecordName, NextRecordType, and NextRecordIdentifier (if any) from the
* response. Then submit another ListResourceRecordSets request, and specify those values for
* StartRecordName, StartRecordType, and StartRecordIdentifier.
*
*
*
* This is a convenience which creates an instance of the {@link ListResourceRecordSetsRequest.Builder} avoiding the
* need to create one manually via {@link ListResourceRecordSetsRequest#builder()}
*
*
* @param listResourceRecordSetsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListResourceRecordSetsRequest.Builder} to create a
* request. A request for the resource record sets that are associated with a specified hosted zone.
* @return Result of the ListResourceRecordSets operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListResourceRecordSets
* @see AWS API Documentation
*/
default ListResourceRecordSetsResponse listResourceRecordSets(
Consumer listResourceRecordSetsRequest) throws NoSuchHostedZoneException,
InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return listResourceRecordSets(ListResourceRecordSetsRequest.builder().applyMutation(listResourceRecordSetsRequest)
.build());
}
/**
*
* This is a variant of
* {@link #listResourceRecordSets(software.amazon.awssdk.services.route53.model.ListResourceRecordSetsRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListResourceRecordSetsIterable responses = client.listResourceRecordSetsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListResourceRecordSetsIterable responses = client
* .listResourceRecordSetsPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListResourceRecordSetsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListResourceRecordSetsIterable responses = client.listResourceRecordSetsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxItems won't limit the number of results you get with the paginator.
* It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listResourceRecordSets(software.amazon.awssdk.services.route53.model.ListResourceRecordSetsRequest)}
* operation.
*
*
* @param listResourceRecordSetsRequest
* A request for the resource record sets that are associated with a specified hosted zone.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListResourceRecordSets
* @see AWS API Documentation
*/
default ListResourceRecordSetsIterable listResourceRecordSetsPaginator(
ListResourceRecordSetsRequest listResourceRecordSetsRequest) throws NoSuchHostedZoneException, InvalidInputException,
AwsServiceException, SdkClientException, Route53Exception {
return new ListResourceRecordSetsIterable(this, listResourceRecordSetsRequest);
}
/**
*
* This is a variant of
* {@link #listResourceRecordSets(software.amazon.awssdk.services.route53.model.ListResourceRecordSetsRequest)}
* operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
* internally handle making service calls for you.
*
*
* When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
* guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
* pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
* request, you will see the failures only after you start iterating through the iterable.
*
*
*
* The following are few ways to iterate through the response pages:
*
* 1) Using a Stream
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListResourceRecordSetsIterable responses = client.listResourceRecordSetsPaginator(request);
* responses.stream().forEach(....);
* }
*
*
* 2) Using For loop
*
*
* {
* @code
* software.amazon.awssdk.services.route53.paginators.ListResourceRecordSetsIterable responses = client
* .listResourceRecordSetsPaginator(request);
* for (software.amazon.awssdk.services.route53.model.ListResourceRecordSetsResponse response : responses) {
* // do something;
* }
* }
*
*
* 3) Use iterator directly
*
*
* {@code
* software.amazon.awssdk.services.route53.paginators.ListResourceRecordSetsIterable responses = client.listResourceRecordSetsPaginator(request);
* responses.iterator().forEachRemaining(....);
* }
*
*
* Please notice that the configuration of MaxItems won't limit the number of results you get with the paginator.
* It only limits the number of results in each page.
*
*
* Note: If you prefer to have control on service calls, use the
* {@link #listResourceRecordSets(software.amazon.awssdk.services.route53.model.ListResourceRecordSetsRequest)}
* operation.
*
*
*
* This is a convenience which creates an instance of the {@link ListResourceRecordSetsRequest.Builder} avoiding the
* need to create one manually via {@link ListResourceRecordSetsRequest#builder()}
*
*
* @param listResourceRecordSetsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListResourceRecordSetsRequest.Builder} to create a
* request. A request for the resource record sets that are associated with a specified hosted zone.
* @return A custom iterable that can be used to iterate through all the response pages.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListResourceRecordSets
* @see AWS API Documentation
*/
default ListResourceRecordSetsIterable listResourceRecordSetsPaginator(
Consumer listResourceRecordSetsRequest) throws NoSuchHostedZoneException,
InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return listResourceRecordSetsPaginator(ListResourceRecordSetsRequest.builder()
.applyMutation(listResourceRecordSetsRequest).build());
}
/**
*
* Retrieves a list of the reusable delegation sets that are associated with the current Amazon Web Services
* account.
*
*
* @param listReusableDelegationSetsRequest
* A request to get a list of the reusable delegation sets that are associated with the current Amazon Web
* Services account.
* @return Result of the ListReusableDelegationSets operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListReusableDelegationSets
* @see AWS API Documentation
*/
default ListReusableDelegationSetsResponse listReusableDelegationSets(
ListReusableDelegationSetsRequest listReusableDelegationSetsRequest) throws InvalidInputException,
AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Retrieves a list of the reusable delegation sets that are associated with the current Amazon Web Services
* account.
*
*
*
* This is a convenience which creates an instance of the {@link ListReusableDelegationSetsRequest.Builder} avoiding
* the need to create one manually via {@link ListReusableDelegationSetsRequest#builder()}
*
*
* @param listReusableDelegationSetsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListReusableDelegationSetsRequest.Builder} to create
* a request. A request to get a list of the reusable delegation sets that are associated with the current
* Amazon Web Services account.
* @return Result of the ListReusableDelegationSets operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListReusableDelegationSets
* @see AWS API Documentation
*/
default ListReusableDelegationSetsResponse listReusableDelegationSets(
Consumer listReusableDelegationSetsRequest) throws InvalidInputException,
AwsServiceException, SdkClientException, Route53Exception {
return listReusableDelegationSets(ListReusableDelegationSetsRequest.builder()
.applyMutation(listReusableDelegationSetsRequest).build());
}
/**
*
* Retrieves a list of the reusable delegation sets that are associated with the current Amazon Web Services
* account.
*
*
* @return Result of the ListReusableDelegationSets operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListReusableDelegationSets
* @see #listReusableDelegationSets(ListReusableDelegationSetsRequest)
* @see AWS API Documentation
*/
default ListReusableDelegationSetsResponse listReusableDelegationSets() throws InvalidInputException, AwsServiceException,
SdkClientException, Route53Exception {
return listReusableDelegationSets(ListReusableDelegationSetsRequest.builder().build());
}
/**
*
* Lists tags for one health check or hosted zone.
*
*
* For information about using tags for cost allocation, see Using Cost Allocation
* Tags in the Billing and Cost Management User Guide.
*
*
* @param listTagsForResourceRequest
* A complex type containing information about a request for a list of the tags that are associated with an
* individual resource.
* @return Result of the ListTagsForResource operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws ThrottlingException
* The limit on the number of requests per second was exceeded.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTagsForResource
* @see AWS
* API Documentation
*/
default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
throws InvalidInputException, NoSuchHealthCheckException, NoSuchHostedZoneException,
PriorRequestNotCompleteException, ThrottlingException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Lists tags for one health check or hosted zone.
*
*
* For information about using tags for cost allocation, see Using Cost Allocation
* Tags in the Billing and Cost Management User Guide.
*
*
*
* This is a convenience which creates an instance of the {@link ListTagsForResourceRequest.Builder} avoiding the
* need to create one manually via {@link ListTagsForResourceRequest#builder()}
*
*
* @param listTagsForResourceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListTagsForResourceRequest.Builder} to create a
* request. A complex type containing information about a request for a list of the tags that are associated
* with an individual resource.
* @return Result of the ListTagsForResource operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws ThrottlingException
* The limit on the number of requests per second was exceeded.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTagsForResource
* @see AWS
* API Documentation
*/
default ListTagsForResourceResponse listTagsForResource(
Consumer listTagsForResourceRequest) throws InvalidInputException,
NoSuchHealthCheckException, NoSuchHostedZoneException, PriorRequestNotCompleteException, ThrottlingException,
AwsServiceException, SdkClientException, Route53Exception {
return listTagsForResource(ListTagsForResourceRequest.builder().applyMutation(listTagsForResourceRequest).build());
}
/**
*
* Lists tags for up to 10 health checks or hosted zones.
*
*
* For information about using tags for cost allocation, see Using Cost Allocation
* Tags in the Billing and Cost Management User Guide.
*
*
* @param listTagsForResourcesRequest
* A complex type that contains information about the health checks or hosted zones for which you want to
* list tags.
* @return Result of the ListTagsForResources operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws ThrottlingException
* The limit on the number of requests per second was exceeded.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTagsForResources
* @see AWS
* API Documentation
*/
default ListTagsForResourcesResponse listTagsForResources(ListTagsForResourcesRequest listTagsForResourcesRequest)
throws InvalidInputException, NoSuchHealthCheckException, NoSuchHostedZoneException,
PriorRequestNotCompleteException, ThrottlingException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Lists tags for up to 10 health checks or hosted zones.
*
*
* For information about using tags for cost allocation, see Using Cost Allocation
* Tags in the Billing and Cost Management User Guide.
*
*
*
* This is a convenience which creates an instance of the {@link ListTagsForResourcesRequest.Builder} avoiding the
* need to create one manually via {@link ListTagsForResourcesRequest#builder()}
*
*
* @param listTagsForResourcesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListTagsForResourcesRequest.Builder} to create a
* request. A complex type that contains information about the health checks or hosted zones for which you
* want to list tags.
* @return Result of the ListTagsForResources operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws ThrottlingException
* The limit on the number of requests per second was exceeded.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTagsForResources
* @see AWS
* API Documentation
*/
default ListTagsForResourcesResponse listTagsForResources(
Consumer listTagsForResourcesRequest) throws InvalidInputException,
NoSuchHealthCheckException, NoSuchHostedZoneException, PriorRequestNotCompleteException, ThrottlingException,
AwsServiceException, SdkClientException, Route53Exception {
return listTagsForResources(ListTagsForResourcesRequest.builder().applyMutation(listTagsForResourcesRequest).build());
}
/**
*
* Gets information about the latest version for every traffic policy that is associated with the current Amazon Web
* Services account. Policies are listed in the order that they were created in.
*
*
* For information about how of deleting a traffic policy affects the response from ListTrafficPolicies
* , see DeleteTrafficPolicy
* .
*
*
* @param listTrafficPoliciesRequest
* A complex type that contains the information about the request to list the traffic policies that are
* associated with the current Amazon Web Services account.
* @return Result of the ListTrafficPolicies operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTrafficPolicies
* @see AWS
* API Documentation
*/
default ListTrafficPoliciesResponse listTrafficPolicies(ListTrafficPoliciesRequest listTrafficPoliciesRequest)
throws InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets information about the latest version for every traffic policy that is associated with the current Amazon Web
* Services account. Policies are listed in the order that they were created in.
*
*
* For information about how of deleting a traffic policy affects the response from ListTrafficPolicies
* , see DeleteTrafficPolicy
* .
*
*
*
* This is a convenience which creates an instance of the {@link ListTrafficPoliciesRequest.Builder} avoiding the
* need to create one manually via {@link ListTrafficPoliciesRequest#builder()}
*
*
* @param listTrafficPoliciesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListTrafficPoliciesRequest.Builder} to create a
* request. A complex type that contains the information about the request to list the traffic policies that
* are associated with the current Amazon Web Services account.
* @return Result of the ListTrafficPolicies operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTrafficPolicies
* @see AWS
* API Documentation
*/
default ListTrafficPoliciesResponse listTrafficPolicies(
Consumer listTrafficPoliciesRequest) throws InvalidInputException,
AwsServiceException, SdkClientException, Route53Exception {
return listTrafficPolicies(ListTrafficPoliciesRequest.builder().applyMutation(listTrafficPoliciesRequest).build());
}
/**
*
* Gets information about the latest version for every traffic policy that is associated with the current Amazon Web
* Services account. Policies are listed in the order that they were created in.
*
*
* For information about how of deleting a traffic policy affects the response from ListTrafficPolicies
* , see DeleteTrafficPolicy
* .
*
*
* @return Result of the ListTrafficPolicies operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTrafficPolicies
* @see #listTrafficPolicies(ListTrafficPoliciesRequest)
* @see AWS
* API Documentation
*/
default ListTrafficPoliciesResponse listTrafficPolicies() throws InvalidInputException, AwsServiceException,
SdkClientException, Route53Exception {
return listTrafficPolicies(ListTrafficPoliciesRequest.builder().build());
}
/**
*
* Gets information about the traffic policy instances that you created by using the current Amazon Web Services
* account.
*
*
*
* After you submit an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53
* creates the resource record sets that are specified in the traffic policy definition. For more information, see
* the State response element.
*
*
*
* Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can
* use the MaxItems parameter to list them in groups of up to 100.
*
*
* @param listTrafficPolicyInstancesRequest
* A request to get information about the traffic policy instances that you created by using the current
* Amazon Web Services account.
* @return Result of the ListTrafficPolicyInstances operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchTrafficPolicyInstanceException
* No traffic policy instance exists with the specified ID.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTrafficPolicyInstances
* @see AWS API Documentation
*/
default ListTrafficPolicyInstancesResponse listTrafficPolicyInstances(
ListTrafficPolicyInstancesRequest listTrafficPolicyInstancesRequest) throws InvalidInputException,
NoSuchTrafficPolicyInstanceException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets information about the traffic policy instances that you created by using the current Amazon Web Services
* account.
*
*
*
* After you submit an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53
* creates the resource record sets that are specified in the traffic policy definition. For more information, see
* the State response element.
*
*
*
* Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can
* use the MaxItems parameter to list them in groups of up to 100.
*
*
*
* This is a convenience which creates an instance of the {@link ListTrafficPolicyInstancesRequest.Builder} avoiding
* the need to create one manually via {@link ListTrafficPolicyInstancesRequest#builder()}
*
*
* @param listTrafficPolicyInstancesRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListTrafficPolicyInstancesRequest.Builder} to create
* a request. A request to get information about the traffic policy instances that you created by using the
* current Amazon Web Services account.
* @return Result of the ListTrafficPolicyInstances operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchTrafficPolicyInstanceException
* No traffic policy instance exists with the specified ID.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTrafficPolicyInstances
* @see AWS API Documentation
*/
default ListTrafficPolicyInstancesResponse listTrafficPolicyInstances(
Consumer listTrafficPolicyInstancesRequest) throws InvalidInputException,
NoSuchTrafficPolicyInstanceException, AwsServiceException, SdkClientException, Route53Exception {
return listTrafficPolicyInstances(ListTrafficPolicyInstancesRequest.builder()
.applyMutation(listTrafficPolicyInstancesRequest).build());
}
/**
*
* Gets information about the traffic policy instances that you created by using the current Amazon Web Services
* account.
*
*
*
* After you submit an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53
* creates the resource record sets that are specified in the traffic policy definition. For more information, see
* the State response element.
*
*
*
* Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can
* use the MaxItems parameter to list them in groups of up to 100.
*
*
* @return Result of the ListTrafficPolicyInstances operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchTrafficPolicyInstanceException
* No traffic policy instance exists with the specified ID.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTrafficPolicyInstances
* @see #listTrafficPolicyInstances(ListTrafficPolicyInstancesRequest)
* @see AWS API Documentation
*/
default ListTrafficPolicyInstancesResponse listTrafficPolicyInstances() throws InvalidInputException,
NoSuchTrafficPolicyInstanceException, AwsServiceException, SdkClientException, Route53Exception {
return listTrafficPolicyInstances(ListTrafficPolicyInstancesRequest.builder().build());
}
/**
*
* Gets information about the traffic policy instances that you created in a specified hosted zone.
*
*
*
* After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance
* request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the
* traffic policy definition. For more information, see the State response element.
*
*
*
* Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can
* use the MaxItems parameter to list them in groups of up to 100.
*
*
* @param listTrafficPolicyInstancesByHostedZoneRequest
* A request for the traffic policy instances that you created in a specified hosted zone.
* @return Result of the ListTrafficPolicyInstancesByHostedZone operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchTrafficPolicyInstanceException
* No traffic policy instance exists with the specified ID.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTrafficPolicyInstancesByHostedZone
* @see AWS API Documentation
*/
default ListTrafficPolicyInstancesByHostedZoneResponse listTrafficPolicyInstancesByHostedZone(
ListTrafficPolicyInstancesByHostedZoneRequest listTrafficPolicyInstancesByHostedZoneRequest)
throws InvalidInputException, NoSuchTrafficPolicyInstanceException, NoSuchHostedZoneException, AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets information about the traffic policy instances that you created in a specified hosted zone.
*
*
*
* After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance
* request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the
* traffic policy definition. For more information, see the State response element.
*
*
*
* Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can
* use the MaxItems parameter to list them in groups of up to 100.
*
*
*
* This is a convenience which creates an instance of the
* {@link ListTrafficPolicyInstancesByHostedZoneRequest.Builder} avoiding the need to create one manually via
* {@link ListTrafficPolicyInstancesByHostedZoneRequest#builder()}
*
*
* @param listTrafficPolicyInstancesByHostedZoneRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListTrafficPolicyInstancesByHostedZoneRequest.Builder}
* to create a request. A request for the traffic policy instances that you created in a specified hosted
* zone.
* @return Result of the ListTrafficPolicyInstancesByHostedZone operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchTrafficPolicyInstanceException
* No traffic policy instance exists with the specified ID.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTrafficPolicyInstancesByHostedZone
* @see AWS API Documentation
*/
default ListTrafficPolicyInstancesByHostedZoneResponse listTrafficPolicyInstancesByHostedZone(
Consumer listTrafficPolicyInstancesByHostedZoneRequest)
throws InvalidInputException, NoSuchTrafficPolicyInstanceException, NoSuchHostedZoneException, AwsServiceException,
SdkClientException, Route53Exception {
return listTrafficPolicyInstancesByHostedZone(ListTrafficPolicyInstancesByHostedZoneRequest.builder()
.applyMutation(listTrafficPolicyInstancesByHostedZoneRequest).build());
}
/**
*
* Gets information about the traffic policy instances that you created by using a specify traffic policy version.
*
*
*
* After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance
* request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the
* traffic policy definition. For more information, see the State response element.
*
*
*
* Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can
* use the MaxItems parameter to list them in groups of up to 100.
*
*
* @param listTrafficPolicyInstancesByPolicyRequest
* A complex type that contains the information about the request to list your traffic policy instances.
* @return Result of the ListTrafficPolicyInstancesByPolicy operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchTrafficPolicyInstanceException
* No traffic policy instance exists with the specified ID.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTrafficPolicyInstancesByPolicy
* @see AWS API Documentation
*/
default ListTrafficPolicyInstancesByPolicyResponse listTrafficPolicyInstancesByPolicy(
ListTrafficPolicyInstancesByPolicyRequest listTrafficPolicyInstancesByPolicyRequest) throws InvalidInputException,
NoSuchTrafficPolicyInstanceException, NoSuchTrafficPolicyException, AwsServiceException, SdkClientException,
Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets information about the traffic policy instances that you created by using a specify traffic policy version.
*
*
*
* After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance
* request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the
* traffic policy definition. For more information, see the State response element.
*
*
*
* Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can
* use the MaxItems parameter to list them in groups of up to 100.
*
*
*
* This is a convenience which creates an instance of the {@link ListTrafficPolicyInstancesByPolicyRequest.Builder}
* avoiding the need to create one manually via {@link ListTrafficPolicyInstancesByPolicyRequest#builder()}
*
*
* @param listTrafficPolicyInstancesByPolicyRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListTrafficPolicyInstancesByPolicyRequest.Builder} to
* create a request. A complex type that contains the information about the request to list your traffic
* policy instances.
* @return Result of the ListTrafficPolicyInstancesByPolicy operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchTrafficPolicyInstanceException
* No traffic policy instance exists with the specified ID.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTrafficPolicyInstancesByPolicy
* @see AWS API Documentation
*/
default ListTrafficPolicyInstancesByPolicyResponse listTrafficPolicyInstancesByPolicy(
Consumer listTrafficPolicyInstancesByPolicyRequest)
throws InvalidInputException, NoSuchTrafficPolicyInstanceException, NoSuchTrafficPolicyException,
AwsServiceException, SdkClientException, Route53Exception {
return listTrafficPolicyInstancesByPolicy(ListTrafficPolicyInstancesByPolicyRequest.builder()
.applyMutation(listTrafficPolicyInstancesByPolicyRequest).build());
}
/**
*
* Gets information about all of the versions for a specified traffic policy.
*
*
* Traffic policy versions are listed in numerical order by VersionNumber.
*
*
* @param listTrafficPolicyVersionsRequest
* A complex type that contains the information about the request to list your traffic policies.
* @return Result of the ListTrafficPolicyVersions operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTrafficPolicyVersions
* @see AWS API Documentation
*/
default ListTrafficPolicyVersionsResponse listTrafficPolicyVersions(
ListTrafficPolicyVersionsRequest listTrafficPolicyVersionsRequest) throws InvalidInputException,
NoSuchTrafficPolicyException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets information about all of the versions for a specified traffic policy.
*
*
* Traffic policy versions are listed in numerical order by VersionNumber.
*
*
*
* This is a convenience which creates an instance of the {@link ListTrafficPolicyVersionsRequest.Builder} avoiding
* the need to create one manually via {@link ListTrafficPolicyVersionsRequest#builder()}
*
*
* @param listTrafficPolicyVersionsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListTrafficPolicyVersionsRequest.Builder} to create a
* request. A complex type that contains the information about the request to list your traffic policies.
* @return Result of the ListTrafficPolicyVersions operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListTrafficPolicyVersions
* @see AWS API Documentation
*/
default ListTrafficPolicyVersionsResponse listTrafficPolicyVersions(
Consumer listTrafficPolicyVersionsRequest) throws InvalidInputException,
NoSuchTrafficPolicyException, AwsServiceException, SdkClientException, Route53Exception {
return listTrafficPolicyVersions(ListTrafficPolicyVersionsRequest.builder()
.applyMutation(listTrafficPolicyVersionsRequest).build());
}
/**
*
* Gets a list of the VPCs that were created by other accounts and that can be associated with a specified hosted
* zone because you've submitted one or more CreateVPCAssociationAuthorization requests.
*
*
* The response includes a VPCs element with a VPC child element for each VPC that can be
* associated with the hosted zone.
*
*
* @param listVpcAssociationAuthorizationsRequest
* A complex type that contains information about that can be associated with your hosted zone.
* @return Result of the ListVPCAssociationAuthorizations operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidPaginationTokenException
* The value that you specified to get the second or subsequent page of results is invalid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListVPCAssociationAuthorizations
* @see AWS API Documentation
*/
default ListVpcAssociationAuthorizationsResponse listVPCAssociationAuthorizations(
ListVpcAssociationAuthorizationsRequest listVpcAssociationAuthorizationsRequest) throws NoSuchHostedZoneException,
InvalidInputException, InvalidPaginationTokenException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets a list of the VPCs that were created by other accounts and that can be associated with a specified hosted
* zone because you've submitted one or more CreateVPCAssociationAuthorization requests.
*
*
* The response includes a VPCs element with a VPC child element for each VPC that can be
* associated with the hosted zone.
*
*
*
* This is a convenience which creates an instance of the {@link ListVpcAssociationAuthorizationsRequest.Builder}
* avoiding the need to create one manually via {@link ListVpcAssociationAuthorizationsRequest#builder()}
*
*
* @param listVpcAssociationAuthorizationsRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.ListVpcAssociationAuthorizationsRequest.Builder} to
* create a request. A complex type that contains information about that can be associated with your hosted
* zone.
* @return Result of the ListVPCAssociationAuthorizations operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws InvalidPaginationTokenException
* The value that you specified to get the second or subsequent page of results is invalid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.ListVPCAssociationAuthorizations
* @see AWS API Documentation
*/
default ListVpcAssociationAuthorizationsResponse listVPCAssociationAuthorizations(
Consumer listVpcAssociationAuthorizationsRequest)
throws NoSuchHostedZoneException, InvalidInputException, InvalidPaginationTokenException, AwsServiceException,
SdkClientException, Route53Exception {
return listVPCAssociationAuthorizations(ListVpcAssociationAuthorizationsRequest.builder()
.applyMutation(listVpcAssociationAuthorizationsRequest).build());
}
/**
*
* Gets the value that Amazon Route 53 returns in response to a DNS request for a specified record name and type.
* You can optionally specify the IP address of a DNS resolver, an EDNS0 client subnet IP address, and a subnet
* mask.
*
*
* This call only supports querying public hosted zones.
*
*
*
* The TestDnsAnswer returns information similar to what you would expect from the answer section of
* the dig command. Therefore, if you query for the name servers of a subdomain that point to the
* parent name servers, those will not be returned.
*
*
*
* @param testDnsAnswerRequest
* Gets the value that Amazon Route 53 returns in response to a DNS request for a specified record name and
* type. You can optionally specify the IP address of a DNS resolver, an EDNS0 client subnet IP address, and
* a subnet mask.
* @return Result of the TestDNSAnswer operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.TestDNSAnswer
* @see AWS API
* Documentation
*/
default TestDnsAnswerResponse testDNSAnswer(TestDnsAnswerRequest testDnsAnswerRequest) throws NoSuchHostedZoneException,
InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Gets the value that Amazon Route 53 returns in response to a DNS request for a specified record name and type.
* You can optionally specify the IP address of a DNS resolver, an EDNS0 client subnet IP address, and a subnet
* mask.
*
*
* This call only supports querying public hosted zones.
*
*
*
* The TestDnsAnswer returns information similar to what you would expect from the answer section of
* the dig command. Therefore, if you query for the name servers of a subdomain that point to the
* parent name servers, those will not be returned.
*
*
*
* This is a convenience which creates an instance of the {@link TestDnsAnswerRequest.Builder} avoiding the need to
* create one manually via {@link TestDnsAnswerRequest#builder()}
*
*
* @param testDnsAnswerRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.TestDnsAnswerRequest.Builder} to create a request.
* Gets the value that Amazon Route 53 returns in response to a DNS request for a specified record name and
* type. You can optionally specify the IP address of a DNS resolver, an EDNS0 client subnet IP address, and
* a subnet mask.
* @return Result of the TestDNSAnswer operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.TestDNSAnswer
* @see AWS API
* Documentation
*/
default TestDnsAnswerResponse testDNSAnswer(Consumer testDnsAnswerRequest)
throws NoSuchHostedZoneException, InvalidInputException, AwsServiceException, SdkClientException, Route53Exception {
return testDNSAnswer(TestDnsAnswerRequest.builder().applyMutation(testDnsAnswerRequest).build());
}
/**
*
* Updates an existing health check. Note that some values can't be updated.
*
*
* For more information about updating health checks, see Creating,
* Updating, and Deleting Health Checks in the Amazon Route 53 Developer Guide.
*
*
* @param updateHealthCheckRequest
* A complex type that contains information about a request to update a health check.
* @return Result of the UpdateHealthCheck operation returned by the service.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws HealthCheckVersionMismatchException
* The value of HealthCheckVersion in the request doesn't match the value of
* HealthCheckVersion in the health check.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.UpdateHealthCheck
* @see AWS API
* Documentation
*/
default UpdateHealthCheckResponse updateHealthCheck(UpdateHealthCheckRequest updateHealthCheckRequest)
throws NoSuchHealthCheckException, InvalidInputException, HealthCheckVersionMismatchException, AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Updates an existing health check. Note that some values can't be updated.
*
*
* For more information about updating health checks, see Creating,
* Updating, and Deleting Health Checks in the Amazon Route 53 Developer Guide.
*
*
*
* This is a convenience which creates an instance of the {@link UpdateHealthCheckRequest.Builder} avoiding the need
* to create one manually via {@link UpdateHealthCheckRequest#builder()}
*
*
* @param updateHealthCheckRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.UpdateHealthCheckRequest.Builder} to create a
* request. A complex type that contains information about a request to update a health check.
* @return Result of the UpdateHealthCheck operation returned by the service.
* @throws NoSuchHealthCheckException
* No health check exists with the specified ID.
* @throws InvalidInputException
* The input is not valid.
* @throws HealthCheckVersionMismatchException
* The value of HealthCheckVersion in the request doesn't match the value of
* HealthCheckVersion in the health check.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.UpdateHealthCheck
* @see AWS API
* Documentation
*/
default UpdateHealthCheckResponse updateHealthCheck(Consumer updateHealthCheckRequest)
throws NoSuchHealthCheckException, InvalidInputException, HealthCheckVersionMismatchException, AwsServiceException,
SdkClientException, Route53Exception {
return updateHealthCheck(UpdateHealthCheckRequest.builder().applyMutation(updateHealthCheckRequest).build());
}
/**
*
* Updates the comment for a specified hosted zone.
*
*
* @param updateHostedZoneCommentRequest
* A request to update the comment for a hosted zone.
* @return Result of the UpdateHostedZoneComment operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.UpdateHostedZoneComment
* @see AWS API Documentation
*/
default UpdateHostedZoneCommentResponse updateHostedZoneComment(UpdateHostedZoneCommentRequest updateHostedZoneCommentRequest)
throws NoSuchHostedZoneException, InvalidInputException, PriorRequestNotCompleteException, AwsServiceException,
SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Updates the comment for a specified hosted zone.
*
*
*
* This is a convenience which creates an instance of the {@link UpdateHostedZoneCommentRequest.Builder} avoiding
* the need to create one manually via {@link UpdateHostedZoneCommentRequest#builder()}
*
*
* @param updateHostedZoneCommentRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.UpdateHostedZoneCommentRequest.Builder} to create a
* request. A request to update the comment for a hosted zone.
* @return Result of the UpdateHostedZoneComment operation returned by the service.
* @throws NoSuchHostedZoneException
* No hosted zone exists with the ID that you specified.
* @throws InvalidInputException
* The input is not valid.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.UpdateHostedZoneComment
* @see AWS API Documentation
*/
default UpdateHostedZoneCommentResponse updateHostedZoneComment(
Consumer updateHostedZoneCommentRequest) throws NoSuchHostedZoneException,
InvalidInputException, PriorRequestNotCompleteException, AwsServiceException, SdkClientException, Route53Exception {
return updateHostedZoneComment(UpdateHostedZoneCommentRequest.builder().applyMutation(updateHostedZoneCommentRequest)
.build());
}
/**
*
* Updates the comment for a specified traffic policy version.
*
*
* @param updateTrafficPolicyCommentRequest
* A complex type that contains information about the traffic policy that you want to update the comment for.
* @return Result of the UpdateTrafficPolicyComment operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.UpdateTrafficPolicyComment
* @see AWS API Documentation
*/
default UpdateTrafficPolicyCommentResponse updateTrafficPolicyComment(
UpdateTrafficPolicyCommentRequest updateTrafficPolicyCommentRequest) throws InvalidInputException,
NoSuchTrafficPolicyException, ConcurrentModificationException, AwsServiceException, SdkClientException,
Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
* Updates the comment for a specified traffic policy version.
*
*
*
* This is a convenience which creates an instance of the {@link UpdateTrafficPolicyCommentRequest.Builder} avoiding
* the need to create one manually via {@link UpdateTrafficPolicyCommentRequest#builder()}
*
*
* @param updateTrafficPolicyCommentRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.UpdateTrafficPolicyCommentRequest.Builder} to create
* a request. A complex type that contains information about the traffic policy that you want to update the
* comment for.
* @return Result of the UpdateTrafficPolicyComment operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws ConcurrentModificationException
* Another user submitted a request to create, update, or delete the object at the same time that you did.
* Retry the request.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.UpdateTrafficPolicyComment
* @see AWS API Documentation
*/
default UpdateTrafficPolicyCommentResponse updateTrafficPolicyComment(
Consumer updateTrafficPolicyCommentRequest) throws InvalidInputException,
NoSuchTrafficPolicyException, ConcurrentModificationException, AwsServiceException, SdkClientException,
Route53Exception {
return updateTrafficPolicyComment(UpdateTrafficPolicyCommentRequest.builder()
.applyMutation(updateTrafficPolicyCommentRequest).build());
}
/**
*
*
* After you submit a UpdateTrafficPolicyInstance request, there's a brief delay while Route 53 creates
* the resource record sets that are specified in the traffic policy definition. Use
* GetTrafficPolicyInstance with the id of updated traffic policy instance confirm that
* the UpdateTrafficPolicyInstance request completed successfully. For more information, see the
* State response element.
*
*
*
* Updates the resource record sets in a specified hosted zone that were created based on the settings in a
* specified traffic policy version.
*
*
* When you update a traffic policy instance, Amazon Route 53 continues to respond to DNS queries for the root
* resource record set name (such as example.com) while it replaces one group of resource record sets with another.
* Route 53 performs the following operations:
*
*
* -
*
* Route 53 creates a new group of resource record sets based on the specified traffic policy. This is true
* regardless of how significant the differences are between the existing resource record sets and the new resource
* record sets.
*
*
* -
*
* When all of the new resource record sets have been created, Route 53 starts to respond to DNS queries for the
* root resource record set name (such as example.com) by using the new resource record sets.
*
*
* -
*
* Route 53 deletes the old group of resource record sets that are associated with the root resource record set
* name.
*
*
*
*
* @param updateTrafficPolicyInstanceRequest
* A complex type that contains information about the resource record sets that you want to update based on a
* specified traffic policy instance.
* @return Result of the UpdateTrafficPolicyInstance operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws NoSuchTrafficPolicyInstanceException
* No traffic policy instance exists with the specified ID.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws ConflictingTypesException
* You tried to update a traffic policy instance by using a traffic policy version that has a different DNS
* type than the current type for the instance. You specified the type in the JSON document in the
* CreateTrafficPolicy or CreateTrafficPolicyVersionrequest.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.UpdateTrafficPolicyInstance
* @see AWS API Documentation
*/
default UpdateTrafficPolicyInstanceResponse updateTrafficPolicyInstance(
UpdateTrafficPolicyInstanceRequest updateTrafficPolicyInstanceRequest) throws InvalidInputException,
NoSuchTrafficPolicyException, NoSuchTrafficPolicyInstanceException, PriorRequestNotCompleteException,
ConflictingTypesException, AwsServiceException, SdkClientException, Route53Exception {
throw new UnsupportedOperationException();
}
/**
*
*
* After you submit a UpdateTrafficPolicyInstance request, there's a brief delay while Route 53 creates
* the resource record sets that are specified in the traffic policy definition. Use
* GetTrafficPolicyInstance with the id of updated traffic policy instance confirm that
* the UpdateTrafficPolicyInstance request completed successfully. For more information, see the
* State response element.
*
*
*
* Updates the resource record sets in a specified hosted zone that were created based on the settings in a
* specified traffic policy version.
*
*
* When you update a traffic policy instance, Amazon Route 53 continues to respond to DNS queries for the root
* resource record set name (such as example.com) while it replaces one group of resource record sets with another.
* Route 53 performs the following operations:
*
*
* -
*
* Route 53 creates a new group of resource record sets based on the specified traffic policy. This is true
* regardless of how significant the differences are between the existing resource record sets and the new resource
* record sets.
*
*
* -
*
* When all of the new resource record sets have been created, Route 53 starts to respond to DNS queries for the
* root resource record set name (such as example.com) by using the new resource record sets.
*
*
* -
*
* Route 53 deletes the old group of resource record sets that are associated with the root resource record set
* name.
*
*
*
*
*
* This is a convenience which creates an instance of the {@link UpdateTrafficPolicyInstanceRequest.Builder}
* avoiding the need to create one manually via {@link UpdateTrafficPolicyInstanceRequest#builder()}
*
*
* @param updateTrafficPolicyInstanceRequest
* A {@link Consumer} that will call methods on
* {@link software.amazon.awssdk.services.route53.model.UpdateTrafficPolicyInstanceRequest.Builder} to create
* a request. A complex type that contains information about the resource record sets that you want to update
* based on a specified traffic policy instance.
* @return Result of the UpdateTrafficPolicyInstance operation returned by the service.
* @throws InvalidInputException
* The input is not valid.
* @throws NoSuchTrafficPolicyException
* No traffic policy exists with the specified ID.
* @throws NoSuchTrafficPolicyInstanceException
* No traffic policy instance exists with the specified ID.
* @throws PriorRequestNotCompleteException
* If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent
* requests for the same hosted zone and return an HTTP 400 error (Bad request).
* If Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals
* of increasing duration, before you try the request again.
* @throws ConflictingTypesException
* You tried to update a traffic policy instance by using a traffic policy version that has a different DNS
* type than the current type for the instance. You specified the type in the JSON document in the
* CreateTrafficPolicy or CreateTrafficPolicyVersionrequest.
* @throws SdkException
* Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
* catch all scenarios.
* @throws SdkClientException
* If any client side error occurs such as an IO related failure, failure to get credentials, etc.
* @throws Route53Exception
* Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
* @sample Route53Client.UpdateTrafficPolicyInstance
* @see AWS API Documentation
*/
default UpdateTrafficPolicyInstanceResponse updateTrafficPolicyInstance(
Consumer updateTrafficPolicyInstanceRequest)
throws InvalidInputException, NoSuchTrafficPolicyException, NoSuchTrafficPolicyInstanceException,
PriorRequestNotCompleteException, ConflictingTypesException, AwsServiceException, SdkClientException,
Route53Exception {
return updateTrafficPolicyInstance(UpdateTrafficPolicyInstanceRequest.builder()
.applyMutation(updateTrafficPolicyInstanceRequest).build());
}
/**
* Create an instance of {@link Route53Waiter} using this client.
*
* Waiters created via this method are managed by the SDK and resources will be released when the service client is
* closed.
*
* @return an instance of {@link Route53Waiter}
*/
default Route53Waiter waiter() {
throw new UnsupportedOperationException();
}
/**
* Create a {@link Route53Client} with the region loaded from the
* {@link software.amazon.awssdk.regions.providers.DefaultAwsRegionProviderChain} and credentials loaded from the
* {@link software.amazon.awssdk.auth.credentials.DefaultCredentialsProvider}.
*/
static Route53Client create() {
return builder().build();
}
/**
* Create a builder that can be used to configure and create a {@link Route53Client}.
*/
static Route53ClientBuilder builder() {
return new DefaultRoute53ClientBuilder();
}
static ServiceMetadata serviceMetadata() {
return ServiceMetadata.of(SERVICE_METADATA_ID);
}
@Override
default Route53ServiceClientConfiguration serviceClientConfiguration() {
throw new UnsupportedOperationException();
}
}