
cvc5-cvc5-1.2.0.contrib.competitions.smt-comp.run-script-smtcomp2018 Maven / Gradle / Ivy
The newest version!
#!/bin/bash
cvc4=./cvc4
bench="$1"
logic=$(expr "$(grep -m1 '^[^;]*set-logic' "$bench")" : ' *(set-logic *\([A-Z_]*\) *) *$')
# use: trywith [params..]
# to attempt a run. Only thing printed on stdout is "sat" or "unsat", in which
# case this run script terminates immediately. Otherwise, this function
# returns normally and prints the output of the solver to stderr.
function trywith {
limit=$1; shift;
result="$(ulimit -S -t "$limit";$cvc4 -L smt2.6 --no-incremental --no-checking --no-interactive "$@" $bench)"
case "$result" in
sat|unsat) echo "$result"; exit 0;;
*) echo "$result" >&2;;
esac
}
# use: finishwith [params..]
# to run cvc4 and let it output whatever it will to stdout.
function finishwith {
$cvc4 -L smt2.6 --no-incremental --no-checking --no-interactive "$@" $bench
}
case "$logic" in
QF_LRA)
trywith 200 --miplib-trick --miplib-trick-subs=4 --use-approx --lemmas-on-replay-failure --replay-early-close-depth=4 --replay-lemma-reject-cut=128 --replay-reject-cut=512 --unconstrained-simp --use-soi
finishwith --no-restrict-pivots --use-soi --new-prop --unconstrained-simp
;;
QF_LIA)
# same as QF_LRA but add --pb-rewrites
finishwith --miplib-trick --miplib-trick-subs=4 --use-approx --lemmas-on-replay-failure --replay-early-close-depth=4 --replay-lemma-reject-cut=128 --replay-reject-cut=512 --unconstrained-simp --use-soi --pb-rewrites
;;
QF_NIA)
trywith 300 --nl-ext-tplanes --decision=internal
trywith 30 --no-nl-ext-tplanes --decision=internal
# this totals up to more than 20 minutes, although notice that smaller bit-widths may quickly fail
trywith 300 --solve-int-as-bv=2 --bitblast=eager --bv-sat-solver=cadical --bitblast-aig --no-bv-abstraction
trywith 300 --solve-int-as-bv=4 --bitblast=eager --bv-sat-solver=cadical --bitblast-aig --no-bv-abstraction
trywith 300 --solve-int-as-bv=8 --bitblast=eager --bv-sat-solver=cadical --bitblast-aig --no-bv-abstraction
trywith 300 --solve-int-as-bv=16 --bitblast=eager --bv-sat-solver=cadical --bitblast-aig --no-bv-abstraction
finishwith --solve-int-as-bv=32 --bitblast=eager --bv-sat-solver=cadical --bitblast-aig --no-bv-abstraction
;;
QF_NRA)
trywith 300 --nl-ext-tplanes --decision=internal
trywith 300 --nl-ext-tplanes --decision=justification --no-nl-ext-factor
trywith 30 --nl-ext-tplanes --decision=internal --solve-real-as-int
finishwith --nl-ext-tplanes --decision=justification
;;
# all logics with UF + quantifiers should either fall under this or special cases below
ALIA|AUFLIA|AUFLIRA|AUFNIRA|UF|UFIDL|UFLIA|UFLRA|UFNIA|UFDT|UFDTLIA|AUFDTLIA|AUFBVDTLIA|AUFNIA)
# the following is designed for a run time of 20 min.
# initial runs 1min
trywith 30 --simplification=none --full-saturate-quant
trywith 30 --no-e-matching --full-saturate-quant
# trigger selections 3min
trywith 30 --relevant-triggers --full-saturate-quant
trywith 30 --trigger-sel=max --full-saturate-quant
trywith 30 --multi-trigger-when-single --full-saturate-quant
trywith 30 --multi-trigger-when-single --multi-trigger-priority --full-saturate-quant
trywith 30 --multi-trigger-cache --full-saturate-quant
trywith 30 --no-multi-trigger-linear --full-saturate-quant
# other 4min
trywith 30 --pre-skolem-quant --full-saturate-quant
trywith 30 --inst-when=full --full-saturate-quant
trywith 30 --no-e-matching --no-quant-cf --full-saturate-quant
trywith 30 --full-saturate-quant --quant-ind
trywith 30 --decision=internal --simplification=none --no-inst-no-entail --no-quant-cf --full-saturate-quant
trywith 30 --decision=internal --full-saturate-quant
trywith 30 --term-db-mode=relevant --full-saturate-quant
trywith 30 --fs-interleave --full-saturate-quant
# finite model find 3min
trywith 30 --finite-model-find --mbqi=none
trywith 30 --finite-model-find --decision=internal
trywith 30 --finite-model-find --macros-quant --macros-quant-mode=all
trywith 30 --finite-model-find --uf-ss=no-minimal
trywith 60 --finite-model-find --fmf-inst-engine
# long runs 9min
trywith 240 --finite-model-find --decision=internal
finishwith --full-saturate-quant
;;
ABVFP|BVFP|FP)
finishwith --full-saturate-quant
;;
UFBV)
# most problems in UFBV are essentially BV
trywith 300 --full-saturate-quant --decision=internal
trywith 300 --full-saturate-quant --cbqi-nested-qe --decision=internal
trywith 30 --full-saturate-quant --no-cbqi-innermost --global-negate
finishwith --finite-model-find
;;
BV)
trywith 120 --full-saturate-quant
trywith 120 --full-saturate-quant --no-cbqi-innermost
trywith 300 --full-saturate-quant --cbqi-nested-qe --decision=internal
trywith 30 --full-saturate-quant --no-cbqi-bv
trywith 30 --full-saturate-quant --cbqi-bv-ineq=eq-slack
# finish 10min
finishwith --full-saturate-quant --no-cbqi-innermost --global-negate
;;
LIA|LRA|NIA|NRA)
trywith 30 --full-saturate-quant --nl-ext-tplanes
trywith 300 --full-saturate-quant --no-cbqi-innermost
trywith 300 --full-saturate-quant --cbqi-nested-qe
finishwith --full-saturate-quant --cbqi-nested-qe --decision=internal
;;
QF_AUFBV)
trywith 600
finishwith --decision=justification-stoponly
;;
QF_ABV)
trywith 50 --ite-simp --simp-with-care --repeat-simp --arrays-weak-equiv
trywith 500 --arrays-weak-equiv
finishwith --ite-simp --simp-with-care --repeat-simp --arrays-weak-equiv
;;
QF_UFBV)
finishwith --bitblast=eager --bv-sat-solver=cadical
;;
QF_BV)
finishwith --unconstrained-simp --bv-div-zero-const --bv-intro-pow2 --bitblast=eager --bv-sat-solver=cadical --bitblast-aig --bv-eq-slicer=auto --no-bv-abstraction
;;
QF_AUFLIA)
finishwith --no-arrays-eager-index --arrays-eager-lemmas --decision=justification
;;
QF_AX)
finishwith --no-arrays-eager-index --arrays-eager-lemmas --decision=internal
;;
QF_AUFNIA)
finishwith --decision=justification --no-arrays-eager-index --arrays-eager-lemmas
;;
QF_ALIA)
trywith 70 --decision=justification --arrays-weak-equiv
finishwith --decision=justification-stoponly --no-arrays-eager-index --arrays-eager-lemmas
;;
QF_SLIA)
trywith 500 --strings-exp --rewrite-divk --lang=smt2.6.1
finishwith --strings-exp --rewrite-divk --lang=smt2.6.1 --strings-fmf
;;
QF_ABVFP)
finishwith
;;
QF_BVFP)
finishwith
;;
QF_FP)
finishwith
;;
*)
# just run the default
finishwith
;;
esac
© 2015 - 2025 Weber Informatics LLC | Privacy Policy