Download JAR files tagged by deploy with all dependencies

The ServiceMix Drools component provides JBI integration to the Drools Rules Engine. It can be used to deploy a rules set that will implement a router or an actual service. A router will mostly act as a transparent proxy between the consumer and the target service provider mad will mostly be implemented by the jbi.route(uri) method below. This method creates a new exchange identical to the one received by the component and will send it to the specified destination. You can also send back a Fault if needed. A router can also be implemented by using directly the JBI Apis (available with the jbi helper) by using the provided client.

This module was created to fix issue DIRSHARED-91 where the embedded Felix instance inside the default LdapCodecService implementation was making it very problematic to deploy the ldap-codec inside an RCP (OSGi) environment and hence Apache Directory Studio could not use it. This module is most likely temporary and will disappear once we are fully OSGi enabled. This module is a plain old jar, not a bundle to avoid accidental reuse as an OSGi module because it contains the version of the LdapCodecService that embeds Felix to make controls and extended ops pluggable in the codec.

This plugin will support various tasks within the Weblogic 8.1, 9.x, 10.x and 12.x environment. This version starts to support weblogic 10 and 11. The mojo supports such tasks as deploy, undeploy,clientgen,servicegen, and appc are supported as well as many others. The plugin uses exposed API's that are subject to change but have been tested in 8.1 SP 4-6 and 9.0 - 9.2 MP3, 10.x. There are two versions of the plugin to support the two environments based on differences in the JDK. The 9.x version is currently being refactored to support the standard JSR supported deployment interface. The code used in the plugin has been contributed to the Cargo project however to date has not be integrated into the codebase. Please feel free to suggest improvements or help support this plugin effort.

The SAP Java Connector (SAP JCo) is a toolkit that allows a Java application to communicate with any SAP system. It combines an easy to use API with unprecedented flexibility and performance. The package supports both, Java to SAP System as well as SAP System to Java calls. - All SAP Connectors are licensed without additional license fees as part of the respective solution or component license. However, please note that each connector may be used only for connecting external (non-SAP) applications to SAP Systems / SAP Solutions. Scenarios, in which two external (non-SAP) applications are integrated via an SAP Connector, are not allowed. - The redistribution of any connector is not allowed. - All SAP users accessing application functionality through the relevant connector are required to be licensed under a respective solution or component license. To use the SAP JCo with the jco-jar project, you need to either install the SAP JCo jar downloaded from SAP to your local Maven repository (variant a) or deploy it to e.g. an enterprise Maven repository like Nexus or Artifactory (variant b): (a) mvn install:install-file -DgroupId=com.github.easonjim -DartifactId=com.sap.conn.jco.sapjco3 -Dversion=3.0.11 -Dpackaging=jar -Dfile=path/to/sapjco3.jar (b) mvn deploy:deploy-file -DrepositoryId=[your.repo.id] -DgroupId=com.github.easonjim -DartifactId=com.sap.conn.jco.sapjco3 -Dversion=3.0.11 -Dpackaging=jar -Dfile=path/to/sapjco3.jar

--------------------------------------------------------------------------- Version for VIVO 1.8 This uses the source and test code from the Version for VIVO 1.10, edited to make it compatible with VIVO 1.8. It also borrows some code from VIVO 1.10 itself, changes the package name to avoid conflicts, and adds it here. * Vitro 1.8 uses Jena 2, not Jena 3, and Commons Lang 2, not 3, so modify the "import" statements in the Data Distribution code accordingly. * Vitro 1.8 does not have a "...webapp.utils.sparqlrunner" package, so borrow the source from Vitro 1.10, move it to a different package (just for compatibility with the 1.9 version), modify it to use Jena 2 and Commons Lang 2, and modify the Data Distribution API code to use this sparqlrunner package. * Vitro 1.9 has an earlier version of "...webapp.utils.configuration" package, so borrow the source from Vitro 1.10, move it to a different package so it won't conflict with the 1.9 version, modify it to use Jena 2 and Commons Lang 2, and modify the Data Distribution API code to use this configuration package. Make these modifications, compile, JAR it up, and deploy. --------------------------------------------------------------------------- Because VIVO 1.8 is not available as a Maven package, we have extracted the class files, JARed them up, and stored them in a file-based repository within this project. But that doesn't include any transitive dependencies, so any package that this code requires must be explicitly listed as a dependency. ---------------------------------------------------------------------------

The SAP Java Connector (SAP JCo) is a toolkit that allows a Java application to communicate with any SAP system. It combines an easy to use API with unprecedented flexibility and performance. The package supports both, Java to SAP System as well as SAP System to Java calls. - All SAP Connectors are licensed without additional license fees as part of the respective solution or component license. However, please note that each connector may be used only for connecting external (non-SAP) applications to SAP Systems / SAP Solutions. Scenarios, in which two external (non-SAP) applications are integrated via an SAP Connector, are not allowed. - The redistribution of any connector is not allowed. - All SAP users accessing application functionality through the relevant connector are required to be licensed under a respective solution or component license. To use the SAP JCo with the Hibersap project, you need to either install the SAP JCo jar downloaded from SAP to your local Maven repository (variant a) or deploy it to e.g. an enterprise Maven repository like Nexus or Artifactory (variant b): (a) mvn install:install-file -DgroupId=org.hibersap -DartifactId=com.sap.conn.jco.sapjco3 -Dversion=3.0.15 -Dpackaging=jar -Dfile=path/to/sapjco3.jar (b) mvn deploy:deploy-file -DrepositoryId=[your.repo.id] -DgroupId=org.hibersap -DartifactId=com.sap.conn.jco.sapjco3 -Dversion=3.0.15 -Dpackaging=jar -Dfile=sapjco3.jar

The SAP Java Connector (SAP JCo) is a toolkit that allows a Java application to communicate with any SAP system. It combines an easy to use API with unprecedented flexibility and performance. The package supports both, Java to SAP System as well as SAP System to Java calls. - All SAP Connectors are licensed without additional license fees as part of the respective solution or component license. However, please note that each connector may be used only for connecting external (non-SAP) applications to SAP Systems / SAP Solutions. Scenarios, in which two external (non-SAP) applications are integrated via an SAP Connector, are not allowed. - The redistribution of any connector is not allowed. - All SAP users accessing application functionality through the relevant connector are required to be licensed under a respective solution or component license. To use the SAP JCo with the Hibersap project, you need to either install the SAP JCo jar downloaded from SAP to your local Maven repository (variant a) or deploy it to e.g. an enterprise Maven repository like Nexus or Artifactory (variant b): (a) mvn install:install-file -DgroupId=org.hibersap -DartifactId=sapjco3 -Dversion=3.0.12 -Dpackaging=jar -Dfile=path/to/sapjco3.jar (b) mvn deploy:deploy-file -DrepositoryId=[your.repo.id] -DgroupId=org.hibersap -DartifactId=sapjco3 -Dversion=3.0.12 -Dpackaging=jar -Dfile=sapjco3.jar

The SAP Java Connector (SAP JCo) is a toolkit that allows a Java application to communicate with any SAP system. It combines an easy to use API with unprecedented flexibility and performance. The package supports both, Java to SAP System as well as SAP System to Java calls. - All SAP Connectors are licensed without additional license fees as part of the respective solution or component license. However, please note that each connector may be used only for connecting external (non-SAP) applications to SAP Systems / SAP Solutions. Scenarios, in which two external (non-SAP) applications are integrated via an SAP Connector, are not allowed. - The redistribution of any connector is not allowed. - All SAP users accessing application functionality through the relevant connector are required to be licensed under a respective solution or component license. To use the SAP JCo with the Hibersap project, you need to either install the SAP JCo jar downloaded from SAP to your local Maven repository (variant a) or deploy it to e.g. an enterprise Maven repository like Nexus or Artifactory (variant b): (a) mvn install:install-file -DgroupId=org.hibersap -DartifactId=sapjco3 -Dversion=3.0 -Dpackaging=jar -Dfile=path/to/sapjco3.jar (b) mvn deploy:deploy-file -DrepositoryId=[your.repo.id] -DgroupId=org.hibersap -DartifactId=sapjco3 -Dversion=3.0 -Dpackaging=jar -Dfile=sapjco3.jar