Download JAR files tagged by mockmvctarget with all dependencies
pact-jvm-provider-spring_2.12 from group au.com.dius (version 3.6.15)
# Pact Spring/JUnit runner
## Overview
Library provides ability to play contract tests against a provider using Spring & JUnit.
This library is based on and references the JUnit package, so see the [Pact JUnit 4](../pact-jvm-provider-junit) or [Pact JUnit 5](../pact-jvm-provider-junit5) providers for more details regarding configuration using JUnit.
Supports:
- Standard ways to load pacts from folders and broker
- Easy way to change assertion strategy
- Spring Test MockMVC Controllers and ControllerAdvice using MockMvc standalone setup.
- MockMvc debugger output
- Multiple @State runs to test a particular Provider State multiple times
- **au.com.dius.pact.provider.junit.State** custom annotation - before each interaction that requires a state change,
all methods annotated by `@State` with appropriate the state listed will be invoked.
**NOTE:** For publishing provider verification results to a pact broker, make sure the Java system property `pact.provider.version`
is set with the version of your provider.
## Example of MockMvc test
```java
@RunWith(RestPactRunner.class) // Custom pact runner, child of PactRunner which runs only REST tests
@Provider("myAwesomeService") // Set up name of tested provider
@PactFolder("pacts") // Point where to find pacts (See also section Pacts source in documentation)
public class ContractTest {
//Create an instance of your controller. We cannot autowire this as we're not using (and don't want to use) a Spring test runner.
@InjectMocks
private AwesomeController awesomeController = new AwesomeController();
//Mock your service logic class. We'll use this to create scenarios for respective provider states.
@Mock
private AwesomeBusinessLogic awesomeBusinessLogic;
//Create an instance of your controller advice (if you have one). This will be passed to the MockMvcTarget constructor to be wired up with MockMvc.
@InjectMocks
private AwesomeControllerAdvice awesomeControllerAdvice = new AwesomeControllerAdvice();
//Create a new instance of the MockMvcTarget and annotate it as the TestTarget for PactRunner
@TestTarget
public final MockMvcTarget target = new MockMvcTarget();
@Before //Method will be run before each test of interaction
public void before() {
//initialize your mocks using your mocking framework
MockitoAnnotations.initMocks(this);
//configure the MockMvcTarget with your controller and controller advice
target.setControllers(awesomeController);
target.setControllerAdvice(awesomeControllerAdvice);
}
@State("default", "no-data") // Method will be run before testing interactions that require "default" or "no-data" state
public void toDefaultState() {
target.setRunTimes(3); //let's loop through this state a few times for a 3 data variants
when(awesomeBusinessLogic.getById(any(UUID.class)))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.ONE))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.TWO))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.THREE));
}
@State("error-case")
public void SingleUploadExistsState_Success() {
target.setRunTimes(1); //tell the runner to only loop one time for this state
//you might want to throw exceptions to be picked off by your controller advice
when(awesomeBusinessLogic.getById(any(UUID.class)))
.then(i -> { throw new NotCoolException(i.getArgumentAt(0, UUID.class).toString()); });
}
}
```
## Using a Spring runner (version 3.5.7+)
You can use `SpringRestPactRunner` instead of the default Pact runner to use the Spring test annotations. This will
allow you to inject or mock spring beans.
For example:
```java
@RunWith(SpringRestPactRunner.class)
@Provider("pricing")
@PactBroker(protocol = "https", host = "${pactBrokerHost}", port = "443",
authentication = @PactBrokerAuth(username = "${pactBrokerUser}", password = "${pactBrokerPassword}"))
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.DEFINED_PORT)
public class PricingServiceProviderPactTest {
@MockBean
private ProductClient productClient; // This will replace the bean with a mock in the application context
@TestTarget
@SuppressWarnings(value = "VisibilityModifier")
public final Target target = new HttpTarget(8091);
@State("Product X010000021 exists")
public void setupProductX010000021() throws IOException {
reset(productClient);
ProductBuilder product = new ProductBuilder()
.withProductCode("X010000021");
when(productClient.fetch((Set<String>) argThat(contains("X010000021")), any())).thenReturn(product);
}
@State("the product code X00001 can be priced")
public void theProductCodeX00001CanBePriced() throws IOException {
reset(productClient);
ProductBuilder product = new ProductBuilder()
.withProductCode("X00001");
when(productClient.find((Set<String>) argThat(contains("X00001")), any())).thenReturn(product);
}
}
```
### Using Spring Context Properties (version 3.5.14+)
From version 3.5.14 onwards, the SpringRestPactRunner will look up any annotation expressions (like `${pactBrokerHost}`)
above) from the Spring context. For Springboot, this will allow you to define the properties in the application test properties.
For instance, if you create the following `application.yml` in the test resources:
```yaml
pactbroker:
host: "your.broker.local"
port: "443"
protocol: "https"
auth:
username: "<your broker username>"
password: "<your broker password>"
```
Then you can use the defaults on the `@PactBroker` annotation.
```java
@RunWith(SpringRestPactRunner.class)
@Provider("My Service")
@PactBroker(
authentication = @PactBrokerAuth(username = "${pactbroker.auth.username}", password = "${pactbroker.auth.password}")
)
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT)
public class PactVerificationTest {
```
### Using a random port with a Springboot test (version 3.5.14+)
If you use a random port in a springboot test (by setting `SpringBootTest.WebEnvironment.RANDOM_PORT`), you can use the
`SpringBootHttpTarget` which will get the application port from the spring application context.
For example:
```java
@RunWith(SpringRestPactRunner.class)
@Provider("My Service")
@PactBroker
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT)
public class PactVerificationTest {
@TestTarget
public final Target target = new SpringBootHttpTarget();
}
```
Group: au.com.dius Artifact: pact-jvm-provider-spring_2.12
Show all versions Show documentation Show source
Show all versions Show documentation Show source
1 downloads
Artifact pact-jvm-provider-spring_2.12
Group au.com.dius
Version 3.6.15
Last update 29. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 5
Dependencies pact-jvm-provider-junit_2.12, spring-boot-starter-test, spring-webmvc, javax.servlet-api, jackson-datatype-joda,
There are maybe transitive dependencies!
Group au.com.dius
Version 3.6.15
Last update 29. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 5
Dependencies pact-jvm-provider-junit_2.12, spring-boot-starter-test, spring-webmvc, javax.servlet-api, jackson-datatype-joda,
There are maybe transitive dependencies!
pact-jvm-provider-spring_2.11 from group au.com.dius (version 3.5.24)
# Pact Spring/JUnit runner
## Overview
Library provides ability to play contract tests against a provider using Spring & JUnit.
This library is based on and references the JUnit package, so see [junit provider support](pact-jvm-provider-junit) for more details regarding configuration using JUnit.
Supports:
- Standard ways to load pacts from folders and broker
- Easy way to change assertion strategy
- Spring Test MockMVC Controllers and ControllerAdvice using MockMvc standalone setup.
- MockMvc debugger output
- Multiple @State runs to test a particular Provider State multiple times
- **au.com.dius.pact.provider.junit.State** custom annotation - before each interaction that requires a state change,
all methods annotated by `@State` with appropriate the state listed will be invoked.
**NOTE:** For publishing provider verification results to a pact broker, make sure the Java system property `pact.provider.version`
is set with the version of your provider.
## Example of MockMvc test
```java
@RunWith(RestPactRunner.class) // Custom pact runner, child of PactRunner which runs only REST tests
@Provider("myAwesomeService") // Set up name of tested provider
@PactFolder("pacts") // Point where to find pacts (See also section Pacts source in documentation)
public class ContractTest {
//Create an instance of your controller. We cannot autowire this as we're not using (and don't want to use) a Spring test runner.
@InjectMocks
private AwesomeController awesomeController = new AwesomeController();
//Mock your service logic class. We'll use this to create scenarios for respective provider states.
@Mock
private AwesomeBusinessLogic awesomeBusinessLogic;
//Create an instance of your controller advice (if you have one). This will be passed to the MockMvcTarget constructor to be wired up with MockMvc.
@InjectMocks
private AwesomeControllerAdvice awesomeControllerAdvice = new AwesomeControllerAdvice();
//Create a new instance of the MockMvcTarget and annotate it as the TestTarget for PactRunner
@TestTarget
public final MockMvcTarget target = new MockMvcTarget();
@Before //Method will be run before each test of interaction
public void before() {
//initialize your mocks using your mocking framework
MockitoAnnotations.initMocks(this);
//configure the MockMvcTarget with your controller and controller advice
target.setControllers(awesomeController);
target.setControllerAdvice(awesomeControllerAdvice);
}
@State("default", "no-data") // Method will be run before testing interactions that require "default" or "no-data" state
public void toDefaultState() {
target.setRunTimes(3); //let's loop through this state a few times for a 3 data variants
when(awesomeBusinessLogic.getById(any(UUID.class)))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.ONE))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.TWO))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.THREE));
}
@State("error-case")
public void SingleUploadExistsState_Success() {
target.setRunTimes(1); //tell the runner to only loop one time for this state
//you might want to throw exceptions to be picked off by your controller advice
when(awesomeBusinessLogic.getById(any(UUID.class)))
.then(i -> { throw new NotCoolException(i.getArgumentAt(0, UUID.class).toString()); });
}
}
```
## Using a Spring runner (version 3.5.7+)
You can use `SpringRestPactRunner` instead of the default Pact runner to use the Spring test annotations. This will
allow you to inject or mock spring beans.
For example:
```java
@RunWith(SpringRestPactRunner.class)
@Provider("pricing")
@PactBroker(protocol = "https", host = "${pactBrokerHost}", port = "443",
authentication = @PactBrokerAuth(username = "${pactBrokerUser}", password = "${pactBrokerPassword}"))
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.DEFINED_PORT)
public class PricingServiceProviderPactTest {
@MockBean
private ProductClient productClient; // This will replace the bean with a mock in the application context
@TestTarget
@SuppressWarnings(value = "VisibilityModifier")
public final Target target = new HttpTarget(8091);
@State("Product X010000021 exists")
public void setupProductX010000021() throws IOException {
reset(productClient);
ProductBuilder product = new ProductBuilder()
.withProductCode("X010000021");
when(productClient.fetch((Set<String>) argThat(contains("X010000021")), any())).thenReturn(product);
}
@State("the product code X00001 can be priced")
public void theProductCodeX00001CanBePriced() throws IOException {
reset(productClient);
ProductBuilder product = new ProductBuilder()
.withProductCode("X00001");
when(productClient.find((Set<String>) argThat(contains("X00001")), any())).thenReturn(product);
}
}
```
### Using Spring Context Properties (version 3.5.14+)
From version 3.5.14 onwards, the SpringRestPactRunner will look up any annotation expressions (like `${pactBrokerHost}`)
above) from the Spring context. For Springboot, this will allow you to define the properties in the application test properties.
For instance, if you create the following `application.yml` in the test resources:
```yaml
pactbroker:
host: "your.broker.local"
port: "443"
protocol: "https"
auth:
username: "<your broker username>"
password: "<your broker password>"
```
Then you can use the defaults on the `@PactBroker` annotation.
```java
@RunWith(SpringRestPactRunner.class)
@Provider("My Service")
@PactBroker(
authentication = @PactBrokerAuth(username = "${pactbroker.auth.username}", password = "${pactbroker.auth.password}")
)
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT)
public class PactVerificationTest {
```
### Using a random port with a Springboot test (version 3.5.14+)
If you use a random port in a springboot test (by setting `SpringBootTest.WebEnvironment.RANDOM_PORT`), you can use the
`SpringBootHttpTarget` which will get the application port from the spring application context.
For example:
```java
@RunWith(SpringRestPactRunner.class)
@Provider("My Service")
@PactBroker
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT)
public class PactVerificationTest {
@TestTarget
public final Target target = new SpringBootHttpTarget();
}
```
Group: au.com.dius Artifact: pact-jvm-provider-spring_2.11
Show all versions Show documentation Show source
Show all versions Show documentation Show source
2 downloads
Artifact pact-jvm-provider-spring_2.11
Group au.com.dius
Version 3.5.24
Last update 04. November 2018
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 13
Dependencies kotlin-stdlib-jdk8, kotlin-reflect, slf4j-api, groovy-all, kotlin-logging, scala-library, scala-logging_2.11, pact-jvm-provider-junit_2.11, spring-boot-starter-test, spring-web, spring-webmvc, javax.servlet-api, jackson-datatype-joda,
There are maybe transitive dependencies!
Group au.com.dius
Version 3.5.24
Last update 04. November 2018
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 13
Dependencies kotlin-stdlib-jdk8, kotlin-reflect, slf4j-api, groovy-all, kotlin-logging, scala-library, scala-logging_2.11, pact-jvm-provider-junit_2.11, spring-boot-starter-test, spring-web, spring-webmvc, javax.servlet-api, jackson-datatype-joda,
There are maybe transitive dependencies!
pact-jvm-provider-spring from group au.com.dius (version 4.0.10)
# Pact Spring/JUnit runner
## Overview
Library provides ability to play contract tests against a provider using Spring & JUnit.
This library is based on and references the JUnit package, so see the [Pact JUnit 4](../pact-jvm-provider-junit) or [Pact JUnit 5](../pact-jvm-provider-junit5) providers for more details regarding configuration using JUnit.
Supports:
- Standard ways to load pacts from folders and broker
- Easy way to change assertion strategy
- Spring Test MockMVC Controllers and ControllerAdvice using MockMvc standalone setup.
- MockMvc debugger output
- Multiple @State runs to test a particular Provider State multiple times
- **au.com.dius.pact.provider.junit.State** custom annotation - before each interaction that requires a state change,
all methods annotated by `@State` with appropriate the state listed will be invoked.
**NOTE:** For publishing provider verification results to a pact broker, make sure the Java system property `pact.provider.version`
is set with the version of your provider.
## Example of MockMvc test
```java
@RunWith(RestPactRunner.class) // Custom pact runner, child of PactRunner which runs only REST tests
@Provider("myAwesomeService") // Set up name of tested provider
@PactFolder("pacts") // Point where to find pacts (See also section Pacts source in documentation)
public class ContractTest {
//Create an instance of your controller. We cannot autowire this as we're not using (and don't want to use) a Spring test runner.
@InjectMocks
private AwesomeController awesomeController = new AwesomeController();
//Mock your service logic class. We'll use this to create scenarios for respective provider states.
@Mock
private AwesomeBusinessLogic awesomeBusinessLogic;
//Create an instance of your controller advice (if you have one). This will be passed to the MockMvcTarget constructor to be wired up with MockMvc.
@InjectMocks
private AwesomeControllerAdvice awesomeControllerAdvice = new AwesomeControllerAdvice();
//Create a new instance of the MockMvcTarget and annotate it as the TestTarget for PactRunner
@TestTarget
public final MockMvcTarget target = new MockMvcTarget();
@Before //Method will be run before each test of interaction
public void before() {
//initialize your mocks using your mocking framework
MockitoAnnotations.initMocks(this);
//configure the MockMvcTarget with your controller and controller advice
target.setControllers(awesomeController);
target.setControllerAdvice(awesomeControllerAdvice);
}
@State("default", "no-data") // Method will be run before testing interactions that require "default" or "no-data" state
public void toDefaultState() {
target.setRunTimes(3); //let's loop through this state a few times for a 3 data variants
when(awesomeBusinessLogic.getById(any(UUID.class)))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.ONE))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.TWO))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.THREE));
}
@State("error-case")
public void SingleUploadExistsState_Success() {
target.setRunTimes(1); //tell the runner to only loop one time for this state
//you might want to throw exceptions to be picked off by your controller advice
when(awesomeBusinessLogic.getById(any(UUID.class)))
.then(i -> { throw new NotCoolException(i.getArgumentAt(0, UUID.class).toString()); });
}
}
```
## Using Spring runners
You can use `SpringRestPactRunner` or `SpringMessagePactRunner` instead of the default Pact runner to use the Spring test annotations. This will
allow you to inject or mock spring beans. `SpringRestPactRunner` is for restful webapps and `SpringMessagePactRunner` is
for async message tests.
For example:
```java
@RunWith(SpringRestPactRunner.class)
@Provider("pricing")
@PactBroker(protocol = "https", host = "${pactBrokerHost}", port = "443",
authentication = @PactBrokerAuth(username = "${pactBrokerUser}", password = "${pactBrokerPassword}"))
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.DEFINED_PORT)
public class PricingServiceProviderPactTest {
@MockBean
private ProductClient productClient; // This will replace the bean with a mock in the application context
@TestTarget
@SuppressWarnings(value = "VisibilityModifier")
public final Target target = new HttpTarget(8091);
@State("Product X010000021 exists")
public void setupProductX010000021() throws IOException {
reset(productClient);
ProductBuilder product = new ProductBuilder()
.withProductCode("X010000021");
when(productClient.fetch((Set<String>) argThat(contains("X010000021")), any())).thenReturn(product);
}
@State("the product code X00001 can be priced")
public void theProductCodeX00001CanBePriced() throws IOException {
reset(productClient);
ProductBuilder product = new ProductBuilder()
.withProductCode("X00001");
when(productClient.find((Set<String>) argThat(contains("X00001")), any())).thenReturn(product);
}
}
```
### Using Spring Context Properties
The SpringRestPactRunner will look up any annotation expressions (like `${pactBrokerHost}`)
above) from the Spring context. For Springboot, this will allow you to define the properties in the application test properties.
For instance, if you create the following `application.yml` in the test resources:
```yaml
pactbroker:
host: "your.broker.local"
port: "443"
protocol: "https"
auth:
username: "<your broker username>"
password: "<your broker password>"
```
Then you can use the defaults on the `@PactBroker` annotation.
```java
@RunWith(SpringRestPactRunner.class)
@Provider("My Service")
@PactBroker(
authentication = @PactBrokerAuth(username = "${pactbroker.auth.username}", password = "${pactbroker.auth.password}")
)
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT)
public class PactVerificationTest {
```
### Using a random port with a Springboot test
If you use a random port in a springboot test (by setting `SpringBootTest.WebEnvironment.RANDOM_PORT`), you need to set it to the `TestTarget`. How this works is different for JUnit4 and JUnit5.
#### JUnit4
You can use the
`SpringBootHttpTarget` which will get the application port from the spring application context.
For example:
```java
@RunWith(SpringRestPactRunner.class)
@Provider("My Service")
@PactBroker
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT)
public class PactVerificationTest {
@TestTarget
public final Target target = new SpringBootHttpTarget();
}
```
#### JUnit5
You actually don't need to dependend on `pact-jvm-provider-spring` for this. It's sufficient to depend on `pact-jvm-provider-junit5`.
You can set the port to the `HttpTestTarget` object in the before method.
```java
@Provider("My Service")
@PactBroker
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT)
public class PactVerificationTest {
@LocalServerPort
private int port;
@BeforeEach
void before(PactVerificationContext context) {
context.setTarget(new HttpTestTarget("localhost", port));
}
}
```
Group: au.com.dius Artifact: pact-jvm-provider-spring
Show all versions Show documentation Show source
Show all versions Show documentation Show source
0 downloads
Artifact pact-jvm-provider-spring
Group au.com.dius
Version 4.0.10
Last update 18. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 5
Dependencies spring-boot-starter-test, spring-webmvc, javax.servlet-api, jackson-datatype-joda, pact-jvm-provider-junit,
There are maybe transitive dependencies!
Group au.com.dius
Version 4.0.10
Last update 18. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 5
Dependencies spring-boot-starter-test, spring-webmvc, javax.servlet-api, jackson-datatype-joda, pact-jvm-provider-junit,
There are maybe transitive dependencies!
Page 1 from 1 (items total 3)