Download JAR files tagged by points with all dependencies

Jadex Rules is a small lightweight rule engine, which currently employs the well-known Rete algorithm for highly efficient rule matching. Jadex rules is therefore similar to other rule engines like JESS and Drools. Despite the similarities there are also important differences between these systems: * Jadex Rules is very small and intended to be used as component of other software. Even though rules can be specified in a Java dialect as well as (a small variation of) the CLIPS language its primary usage is on the API level. Jadex Rules is currently the core component of the Jadex BDI reasoning engine. * Jadex Rules cleanly separates between state and rule representation. This allows the state implementation as well as the matcher to be flexibly exchanged. Some experiments have e.g. been conducted with a Jena representation. Regarding the matcher, it is planned to support also the Treat algorithm, which has a lower memory footprint than Rete. * Jadex Rules pays close attention to rule debugging. The state as well as the rete engine can be observed at runtime. The rule debugger provides functionalities to execute a rule program stepwise and also use rule breakpoints to stop the execution at those points.

Jadex Rules is a small lightweight rule engine, which currently employs the well-known Rete algorithm for highly efficient rule matching. Jadex rules is therefore similar to other rule engines like JESS and Drools. Despite the similarities there are also important differences between these systems: * Jadex Rules is very small and intended to be used as component of other software. Even though rules can be specified in a Java dialect as well as (a small variation of) the CLIPS language its primary usage is on the API level. Jadex Rules is currently the core component of the Jadex BDI reasoning engine. * Jadex Rules cleanly separates between state and rule representation. This allows the state implementation as well as the matcher to be flexibly exchanged. Some experiments have e.g. been conducted with a Jena representation. Regarding the matcher, it is planned to support also the Treat algorithm, which has a lower memory footprint than Rete. * Jadex Rules pays close attention to rule debugging. The state as well as the rete engine can be observed at runtime. The rule debugger provides functionalities to execute a rule program stepwise and also use rule breakpoints to stop the execution at those points.

This is an implementation of the Neural Gas algorithm on distance data (Relational Neural Gas) for unsupervised clustering. We recommend that you use the functions provided by the RelationalNeuralGas class for your purposes. All other classes and functions are utilities which are used by this central class. In particular, you can use RelationalNeuralGas.train() to obtain a RNGModel (i.e. a clustering of your data), and subsequently you can use RelationalNeuralGas.getAssignments() to obtain the resulting cluster assignments, and RelationalNeuralGas.classify() to cluster new points which are not part of the training data set. The underlying scientific work is summarized nicely in the dissertation "Topographic Mapping of Dissimilarity Datasets" by Alexander Hasenfuss (2009). The basic properties of an Relational Neural Gas algorithm are the following: 1.) It is relational: The data is represented only in terms of a pairwise distance matrix. 2.) It is a clustering method: The algorithm provides a clustering model, that is: After calculation, each data point should be assigned to a cluster (for this package here we only consider hard clustering, that is: each data point is assigned to exactly one cluster). 3.) It is a vector quantization method: Each cluster corresponds to a prototype, which is in the center of the cluster and data points are assigned to the cluster if and only if they are closest to this particular prototype. 4.) It is rank-based: The updates of the prototypes depend only on the distance ranking, not on the absolute value of the distances.

Jadex Rules is a small lightweight rule engine, which currently employs the well-known Rete algorithm for highly efficient rule matching. Jadex rules is therefore similar to other rule engines like JESS and Drools. Despite the similarities there are also important differences between these systems: * Jadex Rules is very small and intended to be used as component of other software. Even though rules can be specified in a Java dialect as well as (a small variation of) the CLIPS language its primary usage is on the API level. Jadex Rules is currently the core component of the Jadex BDI reasoning engine. * Jadex Rules cleanly separates between state and rule representation. This allows the state implementation as well as the matcher to be flexibly exchanged. Some experiments have e.g. been conducted with a Jena representation. Regarding the matcher, it is planned to support also the Treat algorithm, which has a lower memory footprint than Rete. * Jadex Rules pays close attention to rule debugging. The state as well as the rete engine can be observed at runtime. The rule debugger provides functionalities to execute a rule program stepwise and also use rule breakpoints to stop the execution at those points.

pact-jvm-consumer-junit5 ======================== JUnit 5 support for Pact consumer tests ## Dependency The library is available on maven central using: * group-id = `au.com.dius` * artifact-id = `pact-jvm-consumer-junit5_2.12` * version-id = `3.5.x` ## Usage ### 1. Add the Pact consumer test extension to the test class. To write Pact consumer tests with JUnit 5, you need to add `@ExtendWith(PactConsumerTestExt)` to your test class. This replaces the `PactRunner` used for JUnit 4 tests. The rest of the test follows a similar pattern as for JUnit 4 tests. ```java @ExtendWith(PactConsumerTestExt.class) class ExampleJavaConsumerPactTest { ``` ### 2. create a method annotated with `@Pact` that returns the interactions for the test For each test (as with JUnit 4), you need to define a method annotated with the `@Pact` annotation that returns the interactions for the test. ```java @Pact(provider="test_provider", consumer="test_consumer") public RequestResponsePact createPact(PactDslWithProvider builder) { return builder .given("test state") .uponReceiving("ExampleJavaConsumerPactTest test interaction") .path("/") .method("GET") .willRespondWith() .status(200) .body("{\"responsetest\": true}") .toPact(); } ``` ### 3. Link the mock server with the interactions for the test with `@PactTestFor` Then the final step is to use the `@PactTestFor` annotation to tell the Pact extension how to setup the Pact test. You can either put this annotation on the test class, or on the test method. For examples see [ArticlesTest](src/test/java/au/com/dius/pact/consumer/junit5/ArticlesTest.java) and [MultiTest](src/test/groovy/au/com/dius/pact/consumer/junit5/MultiTest.groovy). The `@PactTestFor` annotation allows you to control the mock server in the same way as the JUnit 4 `PactProviderRule`. It allows you to set the hostname to bind to (default is `localhost`) and the port (default is to use a random port). You can also set the Pact specification version to use (default is V3). ```java @ExtendWith(PactConsumerTestExt.class) @PactTestFor(providerName = "ArticlesProvider", port = "1234") public class ExampleJavaConsumerPactTest { ``` **NOTE on the hostname**: The mock server runs in the same JVM as the test, so the only valid values for hostname are: | hostname | result | | -------- | ------ | | `localhost` | binds to the address that localhost points to (normally the loopback adapter) | | `127.0.0.1` or `::1` | binds to the loopback adapter | | host name | binds to the default interface that the host machines DNS name resolves to | | `0.0.0.0` or `::` | binds to the all interfaces on the host machine | #### Matching the interactions by provider name If you set the `providerName` on the `@PactTestFor` annotation, then the first method with a `@Pact` annotation with the same provider name will be used. See [ArticlesTest](src/test/java/au/com/dius/pact/consumer/junit5/ArticlesTest.java) for an example. #### Matching the interactions by method name If you set the `pactMethod` on the `@PactTestFor` annotation, then the method with the provided name will be used (it still needs a `@Pact` annotation). See [MultiTest](src/test/groovy/au/com/dius/pact/consumer/junit5/MultiTest.groovy) for an example. ### Injecting the mock server into the test You can get the mock server injected into the test method by adding a `MockServer` parameter to the test method. ```java @Test void test(MockServer mockServer) { HttpResponse httpResponse = Request.Get(mockServer.getUrl() + "/articles.json").execute().returnResponse(); assertThat(httpResponse.getStatusLine().getStatusCode(), is(equalTo(200))); } ``` This helps with getting the base URL of the mock server, especially when a random port is used. ## Unsupported The current implementation does not support tests with multiple providers. This will be added in a later release.

pact-jvm-consumer-junit5 ======================== JUnit 5 support for Pact consumer tests ## Dependency The library is available on maven central using: * group-id = `au.com.dius` * artifact-id = `pact-jvm-consumer-junit5_2.12` * version-id = `3.6.x` ## Usage ### 1. Add the Pact consumer test extension to the test class. To write Pact consumer tests with JUnit 5, you need to add `@ExtendWith(PactConsumerTestExt)` to your test class. This replaces the `PactRunner` used for JUnit 4 tests. The rest of the test follows a similar pattern as for JUnit 4 tests. ```java @ExtendWith(PactConsumerTestExt.class) class ExampleJavaConsumerPactTest { ``` ### 2. create a method annotated with `@Pact` that returns the interactions for the test For each test (as with JUnit 4), you need to define a method annotated with the `@Pact` annotation that returns the interactions for the test. ```java @Pact(provider="ArticlesProvider", consumer="test_consumer") public RequestResponsePact createPact(PactDslWithProvider builder) { return builder .given("test state") .uponReceiving("ExampleJavaConsumerPactTest test interaction") .path("/articles.json") .method("GET") .willRespondWith() .status(200) .body("{\"responsetest\": true}") .toPact(); } ``` ### 3. Link the mock server with the interactions for the test with `@PactTestFor` Then the final step is to use the `@PactTestFor` annotation to tell the Pact extension how to setup the Pact test. You can either put this annotation on the test class, or on the test method. For examples see [ArticlesTest](src/test/java/au/com/dius/pact/consumer/junit5/ArticlesTest.java) and [MultiTest](src/test/groovy/au/com/dius/pact/consumer/junit5/MultiTest.groovy). The `@PactTestFor` annotation allows you to control the mock server in the same way as the JUnit 4 `PactProviderRule`. It allows you to set the hostname to bind to (default is `localhost`) and the port (default is to use a random port). You can also set the Pact specification version to use (default is V3). ```java @ExtendWith(PactConsumerTestExt.class) @PactTestFor(providerName = "ArticlesProvider") public class ExampleJavaConsumerPactTest { ``` **NOTE on the hostname**: The mock server runs in the same JVM as the test, so the only valid values for hostname are: | hostname | result | | -------- | ------ | | `localhost` | binds to the address that localhost points to (normally the loopback adapter) | | `127.0.0.1` or `::1` | binds to the loopback adapter | | host name | binds to the default interface that the host machines DNS name resolves to | | `0.0.0.0` or `::` | binds to the all interfaces on the host machine | #### Matching the interactions by provider name If you set the `providerName` on the `@PactTestFor` annotation, then the first method with a `@Pact` annotation with the same provider name will be used. See [ArticlesTest](src/test/java/au/com/dius/pact/consumer/junit5/ArticlesTest.java) for an example. #### Matching the interactions by method name If you set the `pactMethod` on the `@PactTestFor` annotation, then the method with the provided name will be used (it still needs a `@Pact` annotation). See [MultiTest](src/test/groovy/au/com/dius/pact/consumer/junit5/MultiTest.groovy) for an example. ### Injecting the mock server into the test You can get the mock server injected into the test method by adding a `MockServer` parameter to the test method. ```java @Test void test(MockServer mockServer) throws IOException { HttpResponse httpResponse = Request.Get(mockServer.getUrl() + "/articles.json").execute().returnResponse(); assertThat(httpResponse.getStatusLine().getStatusCode(), is(equalTo(200))); } ``` This helps with getting the base URL of the mock server, especially when a random port is used. ## Changing the directory pact files are written to By default, pact files are written to `target/pacts` (or `build/pacts` if you use Gradle), but this can be overwritten with the `pact.rootDir` system property. This property needs to be set on the test JVM as most build tools will fork a new JVM to run the tests. For Gradle, add this to your build.gradle: ```groovy test { systemProperties['pact.rootDir'] = "$buildDir/custom-pacts-directory" } ``` For maven, use the systemPropertyVariables configuration: ```xml <project> [...] <build> <plugins> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-surefire-plugin</artifactId> <version>2.18</version> <configuration> <systemPropertyVariables> <pact.rootDir>some/other/directory</pact.rootDir> <buildDirectory>${project.build.directory}</buildDirectory> [...] </systemPropertyVariables> </configuration> </plugin> </plugins> </build> [...] </project> ``` For SBT: ```scala fork in Test := true, javaOptions in Test := Seq("-Dpact.rootDir=some/other/directory") ``` ### Using `@PactFolder` annotation [3.6.2+] You can override the directory the pacts are written in a test by adding the `@PactFolder` annotation to the test class. ## Forcing pact files to be overwritten (3.6.5+) By default, when the pact file is written, it will be merged with any existing pact file. To force the file to be overwritten, set the Java system property `pact.writer.overwrite` to `true`. ## Unsupported The current implementation does not support tests with multiple providers. This will be added in a later release. # Having values injected from provider state callbacks (3.6.11+) You can have values from the provider state callbacks be injected into most places (paths, query parameters, headers, bodies, etc.). This works by using the V3 spec generators with provider state callbacks that return values. One example of where this would be useful is API calls that require an ID which would be auto-generated by the database on the provider side, so there is no way to know what the ID would be beforehand. The following DSL methods all you to set an expression that will be parsed with the values returned from the provider states: For JSON bodies, use `valueFromProviderState`.<br/> For headers, use `headerFromProviderState`.<br/> For query parameters, use `queryParameterFromProviderState`.<br/> For paths, use `pathFromProviderState`. For example, assume that an API call is made to get the details of a user by ID. A provider state can be defined that specifies that the user must be exist, but the ID will be created when the user is created. So we can then define an expression for the path where the ID will be replaced with the value returned from the provider state callback. ```java .pathFromProviderState("/api/users/${id}", "/api/users/100") ``` You can also just use the key instead of an expression: ```java .valueFromProviderState('userId', 'userId', 100) // will look value using userId as the key ```

pact-jvm-consumer-junit5 ======================== JUnit 5 support for Pact consumer tests ## Dependency The library is available on maven central using: * group-id = `au.com.dius` * artifact-id = `pact-jvm-consumer-junit5` * version-id = `4.0.x` ## Usage ### 1. Add the Pact consumer test extension to the test class. To write Pact consumer tests with JUnit 5, you need to add `@ExtendWith(PactConsumerTestExt)` to your test class. This replaces the `PactRunner` used for JUnit 4 tests. The rest of the test follows a similar pattern as for JUnit 4 tests. ```java @ExtendWith(PactConsumerTestExt.class) class ExampleJavaConsumerPactTest { ``` ### 2. create a method annotated with `@Pact` that returns the interactions for the test For each test (as with JUnit 4), you need to define a method annotated with the `@Pact` annotation that returns the interactions for the test. ```java @Pact(provider="ArticlesProvider", consumer="test_consumer") public RequestResponsePact createPact(PactDslWithProvider builder) { return builder .given("test state") .uponReceiving("ExampleJavaConsumerPactTest test interaction") .path("/articles.json") .method("GET") .willRespondWith() .status(200) .body("{\"responsetest\": true}") .toPact(); } ``` ### 3. Link the mock server with the interactions for the test with `@PactTestFor` Then the final step is to use the `@PactTestFor` annotation to tell the Pact extension how to setup the Pact test. You can either put this annotation on the test class, or on the test method. For examples see [ArticlesTest](src/test/java/au/com/dius/pact/consumer/junit5/ArticlesTest.java) and [MultiTest](src/test/groovy/au/com/dius/pact/consumer/junit5/MultiTest.groovy). The `@PactTestFor` annotation allows you to control the mock server in the same way as the JUnit 4 `PactProviderRule`. It allows you to set the hostname to bind to (default is `localhost`) and the port (default is to use a random port). You can also set the Pact specification version to use (default is V3). ```java @ExtendWith(PactConsumerTestExt.class) @PactTestFor(providerName = "ArticlesProvider") public class ExampleJavaConsumerPactTest { ``` **NOTE on the hostname**: The mock server runs in the same JVM as the test, so the only valid values for hostname are: | hostname | result | | -------- | ------ | | `localhost` | binds to the address that localhost points to (normally the loopback adapter) | | `127.0.0.1` or `::1` | binds to the loopback adapter | | host name | binds to the default interface that the host machines DNS name resolves to | | `0.0.0.0` or `::` | binds to the all interfaces on the host machine | #### Matching the interactions by provider name If you set the `providerName` on the `@PactTestFor` annotation, then the first method with a `@Pact` annotation with the same provider name will be used. See [ArticlesTest](src/test/java/au/com/dius/pact/consumer/junit5/ArticlesTest.java) for an example. #### Matching the interactions by method name If you set the `pactMethod` on the `@PactTestFor` annotation, then the method with the provided name will be used (it still needs a `@Pact` annotation). See [MultiTest](src/test/groovy/au/com/dius/pact/consumer/junit5/MultiTest.groovy) for an example. ### Injecting the mock server into the test You can get the mock server injected into the test method by adding a `MockServer` parameter to the test method. ```java @Test void test(MockServer mockServer) throws IOException { HttpResponse httpResponse = Request.Get(mockServer.getUrl() + "/articles.json").execute().returnResponse(); assertThat(httpResponse.getStatusLine().getStatusCode(), is(equalTo(200))); } ``` This helps with getting the base URL of the mock server, especially when a random port is used. ## Changing the directory pact files are written to By default, pact files are written to `target/pacts` (or `build/pacts` if you use Gradle), but this can be overwritten with the `pact.rootDir` system property. This property needs to be set on the test JVM as most build tools will fork a new JVM to run the tests. For Gradle, add this to your build.gradle: ```groovy test { systemProperties['pact.rootDir'] = "$buildDir/custom-pacts-directory" } ``` For maven, use the systemPropertyVariables configuration: ```xml <project> [...] <build> <plugins> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-surefire-plugin</artifactId> <version>2.18</version> <configuration> <systemPropertyVariables> <pact.rootDir>some/other/directory</pact.rootDir> <buildDirectory>${project.build.directory}</buildDirectory> [...] </systemPropertyVariables> </configuration> </plugin> </plugins> </build> [...] </project> ``` For SBT: ```scala fork in Test := true, javaOptions in Test := Seq("-Dpact.rootDir=some/other/directory") ``` ### Using `@PactFolder` annotation You can override the directory the pacts are written in a test by adding the `@PactFolder` annotation to the test class. ## Forcing pact files to be overwritten (3.6.5+) By default, when the pact file is written, it will be merged with any existing pact file. To force the file to be overwritten, set the Java system property `pact.writer.overwrite` to `true`. ## Unsupported The current implementation does not support tests with multiple providers. This will be added in a later release. # Having values injected from provider state callbacks (3.6.11+) You can have values from the provider state callbacks be injected into most places (paths, query parameters, headers, bodies, etc.). This works by using the V3 spec generators with provider state callbacks that return values. One example of where this would be useful is API calls that require an ID which would be auto-generated by the database on the provider side, so there is no way to know what the ID would be beforehand. The following DSL methods all you to set an expression that will be parsed with the values returned from the provider states: For JSON bodies, use `valueFromProviderState`.<br/> For headers, use `headerFromProviderState`.<br/> For query parameters, use `queryParameterFromProviderState`.<br/> For paths, use `pathFromProviderState`. For example, assume that an API call is made to get the details of a user by ID. A provider state can be defined that specifies that the user must be exist, but the ID will be created when the user is created. So we can then define an expression for the path where the ID will be replaced with the value returned from the provider state callback. ```java .pathFromProviderState("/api/users/${id}", "/api/users/100") ``` You can also just use the key instead of an expression: ```java .valueFromProviderState('userId', 'userId', 100) // will look value using userId as the key ```